In this paper,a linear optimization method(LOM)for the design of terahertz circuits is presented,aimed at enhancing the simulation efficacy and reducing the time of the circuit design workflow.This method enables the ...In this paper,a linear optimization method(LOM)for the design of terahertz circuits is presented,aimed at enhancing the simulation efficacy and reducing the time of the circuit design workflow.This method enables the rapid determination of optimal embedding impedance for diodes across a specific bandwidth to achieve maximum efficiency through harmonic balance simulations.By optimizing the linear matching circuit with the optimal embedding impedance,the method effectively segregates the simulation of the linear segments from the nonlinear segments in the frequency multiplier circuit,substantially improving the speed of simulations.The design of on-chip linear matching circuits adopts a modular circuit design strategy,incorporating fixed load resistors to simplify the matching challenge.Utilizing this approach,a 340 GHz frequency doubler was developed and measured.The results demonstrate that,across a bandwidth of 330 GHz to 342 GHz,the efficiency of the doubler remains above 10%,with an input power ranging from 98 mW to 141mW and an output power exceeding 13 mW.Notably,at an input power of 141 mW,a peak output power of 21.8 mW was achieved at 334 GHz,corresponding to an efficiency of 15.8%.展开更多
The scheduling of gasoline-blending operations is an important problem in the oil refining industry. Thisproblem not only exhibits the combinatorial nature that is intrinsic to scheduling problems, but alsonon-convex ...The scheduling of gasoline-blending operations is an important problem in the oil refining industry. Thisproblem not only exhibits the combinatorial nature that is intrinsic to scheduling problems, but alsonon-convex nonlinear behavior, due to the blending of various materials with different quality properties.In this work, a global optimization algorithm is proposed to solve a previously published continuous-timemixed-integer nonlinear scheduling model for gasoline blending. The model includes blend recipe optimi-zation, the distribution problem, and several important operational features and constraints. The algorithmemploys piecewise McCormick relaxation （PMCR） and normalized multiparametric disaggregation tech-nique （NMDT） to compute estimates of the global optimum. These techniques partition the domain of oneof the variables in a bilinear term and generate convex relaxations for each partition. By increasing the num-ber of partitions and reducing the domain of the variables, the algorithm is able to refine the estimates ofthe global solution. The algorithm is compared to two commercial global solvers and two heuristic methodsby solving four examples from the literature. Results show that the proposed global optimization algorithmperforms on par with commercial solvers but is not as fast as heuristic approaches.展开更多
This work addresses the cut order planning(COP)problem for multi-color garment production,which is the first step in the clothing industry.First,a multi-objective optimization model of multicolor COP(MCOP)is establish...This work addresses the cut order planning(COP)problem for multi-color garment production,which is the first step in the clothing industry.First,a multi-objective optimization model of multicolor COP(MCOP)is established with production error and production cost as optimization objectives,combined with constraints such as the number of equipment and the number of layers.Second,a decoupled multi-objective optimization algorithm(DMOA)is proposed based on the linear programming decoupling strategy and non-dominated sorting in genetic algorithmsⅡ(NSGAII).The size-combination matrix and the fabric-layer matrix are decoupled to improve the accuracy of the algorithm.Meanwhile,an improved NSGAII algorithm is designed to obtain the optimal Pareto solution to the MCOP problem,thereby constructing a practical intelligent production optimization algorithm.Finally,the effectiveness and superiority of the proposed DMOA are verified through practical cases and comparative experiments,which can effectively optimize the production process for garment enterprises.展开更多
A class of trust region methods for solving linear inequality constrained problems is proposed in this paper. It is shown that the algorithm is of global convergence.The algorithm uses a version of the two-sided proje...A class of trust region methods for solving linear inequality constrained problems is proposed in this paper. It is shown that the algorithm is of global convergence.The algorithm uses a version of the two-sided projection and the strategy of the unconstrained trust region methods. It keeps the good convergence properties of the unconstrained case and has the merits of the projection method. In some sense, our algorithm can be regarded as an extension and improvement of the projected type algorithm.展开更多
In this paper we prove that a class of trust region methods presented in part I is superlinearly convergent. Numerical tests are reported thereafter. Results by solving a set of typical problems selected from literatu...In this paper we prove that a class of trust region methods presented in part I is superlinearly convergent. Numerical tests are reported thereafter. Results by solving a set of typical problems selected from literatures have demonstrated that our algorithm is effective.展开更多
Gasoline blending is a key process in a petroleum refinery, as it can yield 60%–70% of a typical refinery's total revenue. This process not only exhibits non-convex nonlinear blending behavior due to the complica...Gasoline blending is a key process in a petroleum refinery, as it can yield 60%–70% of a typical refinery's total revenue. This process not only exhibits non-convex nonlinear blending behavior due to the complicated blend mechanism of various component feedstocks with different quality properties, but also involves global optimum searching among numerous blending recipes. Since blend products are required to meet a series of quality requirements and highly-sensitive to the proportion changes of blending feedstocks, global optimization methods for NLP problems are often difficult to be applied because of heavy computational burdens. Thus, piecewise linearization methods are naturally proposed to provide an approximate global optimum solution by adding binary variables into the models and converting the original NLP problems into MILP ones. In this paper, Logarithmtransform piecewise linearization(LTPL) method, an improved piecewise linearization, is proposed. In this method a logarithm transform is applied to convert multi-variable multi-degree constraints into a series of single-variable constraints. As a result, the number of 0–1 variables is greatly reduced. In the final part of this paper, an industrial case study is conducted to demonstrate the effectiveness of LTPL method. In principle, this method would be useful for blending problems with complicated empirical or theoretical models.展开更多
In this paper, a global optimization algorithm is proposed for nonlinear sum of ratios problem （P）. The algorithm works by globally solving problem （P1） that is equivalent to problem （P）, by utilizing linearizat...In this paper, a global optimization algorithm is proposed for nonlinear sum of ratios problem （P）. The algorithm works by globally solving problem （P1） that is equivalent to problem （P）, by utilizing linearization technique a linear relaxation programming of the （P1） is then obtained. The proposed algorithm is convergent to the global minimum of （P1） through the successive refinement of linear relaxation of the feasible region of objective function and solutions of a series of linear relaxation programming. Numerical results indicate that the proposed algorithm is feasible and can be used to globally solve nonlinear sum of ratios problems （P）.展开更多
A improving Steady State Genetic Algorithm for global optimization over linear constraint non-convex programming problem is presented. By convex analyzing, the primal optimal problem can be converted to an equivalent ...A improving Steady State Genetic Algorithm for global optimization over linear constraint non-convex programming problem is presented. By convex analyzing, the primal optimal problem can be converted to an equivalent problem, in which only the information of convex extremes of feasible space is included, and is more easy for GAs to solve. For avoiding invalid genetic operators, a redesigned convex crossover operator is also performed in evolving. As a integrality, the quality of two problem is proven, and a method is also given to get all extremes in linear constraint space. Simulation result show that new algorithm not only converges faster, but also can maintain an diversity population, and can get the global optimum of test problem.展开更多
Downward Looking Sparse Linear Array Three Dimensional SAR(DLSLA 3D SAR) is an important form of 3D SAR imaging, which has a widespread application field. Since its practical equivalent phase centers are usually distr...Downward Looking Sparse Linear Array Three Dimensional SAR(DLSLA 3D SAR) is an important form of 3D SAR imaging, which has a widespread application field. Since its practical equivalent phase centers are usually distributed sparsely and nonuniformly, traditional 3D SAR algorithms suffer from low resolution and high sidelobes in cross-track dimension. To deal with this problem, this paper introduces a method based on back-projection and convex optimization to achieve 3D high accuracy imaging reconstruction. Compared with traditional SAR algorithms, the proposed method sufficiently utilizes the sparsity of the 3D SAR imaging scene and can achieve lower sidelobes and higher resolution in cross-track dimension. In the simulated experiments, the reconstructed results of both simple and complex imaging scene verify that the proposed method outperforms 3D back-projection algorithm and shows satisfying cross-track dimensional resolution and good robustness to noise.展开更多
This paper presents a global optimization approach to solving linear non-quadratic optimal control problems. The main work is to construct a differential flow for finding a global minimizer of the Hamiltonian function...This paper presents a global optimization approach to solving linear non-quadratic optimal control problems. The main work is to construct a differential flow for finding a global minimizer of the Hamiltonian function over a Euclid space. With the Pontryagin principle, the optimal control is characterized by a function of the adjoint variable and is obtained by solving a Hamiltonian differential boundary value problem. For computing an optimal control, an algorithm for numerical practice is given with the description of an example.展开更多
The linear consecutive-k-out-of-n:failure(good)(Lin/Con/k/n:F(G))system consists of n interchangeable components that have different reliabilities.These components are arranged in a line path and different component a...The linear consecutive-k-out-of-n:failure(good)(Lin/Con/k/n:F(G))system consists of n interchangeable components that have different reliabilities.These components are arranged in a line path and different component assignments change the system reliability.The optimization of Lin/Con/k/n:F(G)system is to find an optimal component assignment to maximize the system reliability.As the number of components increases,the computation time for this problem increases considerably.In this paper,we propose a Birnbaum importance-based ant colony optimization(BIACO)algorithm to obtain quasi optimal assignments for such problems.We compare its performance using the Birnbaum importance based two-stage approach(BITA)and Birnbaum importancebased genetic local search(BIGLS)algorithm from previous researches.The experimental results show that the BIACO algorithm has a good performance in the optimization of Lin/Con/k/n:F(G)system.展开更多
The aim of this work is to employ a modified cell-based smoothed finite element method(S-FEM)for topology optimization with the domain discretized with arbitrary polygons.In the present work,the linear polynomial basi...The aim of this work is to employ a modified cell-based smoothed finite element method(S-FEM)for topology optimization with the domain discretized with arbitrary polygons.In the present work,the linear polynomial basis function is used as the weight function instead of the constant weight function used in the standard S-FEM.This improves the accuracy and yields an optimal convergence rate.The gradients are smoothed over each smoothing domain,then used to compute the stiffness matrix.Within the proposed scheme,an optimum topology procedure is conducted over the smoothing domains.Structural materials are distributed over each smoothing domain and the filtering scheme relies on the smoothing domain.Numerical tests are carried out to pursue the performance of the proposed optimization by comparing convergence,efficiency and accuracy.展开更多
How to extract optimal composite attributes from a variety of conventional seismic attributes to detect reservoir features is a reservoir predication key,which is usually solved by reducing dimensionality.Principle co...How to extract optimal composite attributes from a variety of conventional seismic attributes to detect reservoir features is a reservoir predication key,which is usually solved by reducing dimensionality.Principle component analysis（PCA） is the most widely-used linear dimensionality reduction method at present.However,the relationships between seismic attributes and reservoir features are non-linear,so seismic attribute dimensionality reduction based on linear transforms can＇t solve non-linear problems well,reducing reservoir prediction precision.As a new non-linear learning method,manifold learning supplies a new method for seismic attribute analysis.It can discover the intrinsic features and rules hidden in the data by computing low-dimensional,neighborhood-preserving embeddings of high-dimensional inputs.In this paper,we try to extract seismic attributes using locally linear embedding（LLE）,realizing inter-horizon attributes dimensionality reduction of 3D seismic data first and discuss the optimization of its key parameters.Combining model analysis and case studies,we compare the dimensionality reduction and clustering effects of LLE and PCA,both of which indicate that LLE can retain the intrinsic structure of the inputs.The composite attributes and clustering results based on LLE better characterize the distribution of sedimentary facies,reservoir,and even reservoir fluids.展开更多
A method for designing an X-ray flatness filter for medical electron linac is developed. It is used in the optimization process in the electron beam radiation system. Monte Carlo simulation method is used and two exam...A method for designing an X-ray flatness filter for medical electron linac is developed. It is used in the optimization process in the electron beam radiation system. Monte Carlo simulation method is used and two examples of real radiation system optimization processes for China-made medical electron linac are provided： 15 MV X- ray system of BJ-20 linac, and 12 MeV electron system of BJ-14. Results are verified by using the traditional method.展开更多
The main aim of this article is to study the approximation of a locking-free anisotropic nonconforming finite element for the pure displacement boundary value problem of planar linear elasticity. The optimal error est...The main aim of this article is to study the approximation of a locking-free anisotropic nonconforming finite element for the pure displacement boundary value problem of planar linear elasticity. The optimal error estimates are obtained by using some novel approaches and techniques. The method proposed in this article is robust in the sense that the convergence estimates in the energy and L^2-norms are independent-of the Lame parameter λ.展开更多
Byproduct gas is an important secondary energy in iron and steel industry, and its optimization is vital to cost reduction. With the development of iron and steel industry to be more eco-friendly, it is necessary to c...Byproduct gas is an important secondary energy in iron and steel industry, and its optimization is vital to cost reduction. With the development of iron and steel industry to be more eco-friendly, it is necessary to construct an integrated optimized system, taking economics, energy consumption and environment into consideration. Therefore, the environmental cost caused by pollutants discharge should be factored in total cost when optimizing byproduct gas distribution. A green mixed integer linear programming （MILP） model for the optimization of byproduct gases was established to reduce total cost, including both operation cost and environmental cost. The operation cost included penalty for gas deviation, costs of fuel and water consumption, holder booster trip penalty, and so forth; while the environmental cost consisted of penalties for both direct and indirect pollutants discharge. Case study showed that the proposed model brought an optimum solution and 2.2% of the total cost could be reduced compared with previous one.展开更多
The problem of robustifying linear quadratic regulators （LQRs） for a class of uncertain affine nonlinear systems is considered. First, the exact linearization technique is used to transform an uncertain nonlinear sy...The problem of robustifying linear quadratic regulators （LQRs） for a class of uncertain affine nonlinear systems is considered. First, the exact linearization technique is used to transform an uncertain nonlinear system into a linear one and an optimal LQR is designed for the corresponding nominal system. Then, based on the integral sliding mode, a design approach to robustifying the optimal regulator is studied. As a result, the system exhibits global robustness to uncertainties and the ideal sliding mode dynamics is the same as that of the optimal LQR for the nominal system. A global robust optimal sliding mode control （GROSMC） is realized. Finally, a numerical simulation is demonstrated to show the effectiveness and superiority of the proposed algorithm compared with the conventional optimal LQR.展开更多
A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to ...A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 ram/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.展开更多
Optimization of land use structure consists of economic and social and ecological optimization.Applying the minds of system engineering and principles of ecology,this paper presents such thoughts:the optimal forest_co...Optimization of land use structure consists of economic and social and ecological optimization.Applying the minds of system engineering and principles of ecology,this paper presents such thoughts:the optimal forest_coverage rate calculated according to the reality of a district is set as main standard of ecological rationality in the district;through considering the value of ecosystem services of the land with GREEN equivalent (mainly cultivated land and grassland)and based on the rule,GREEN equivalent,this paper introduces the area conversion between woodland and cultivated land,also between woodland and grassland;this paper establishes a multi_dimension controlling model of optimization of land use structure.In addition,a multi_objective linear programming model for optimization of land use structure is designed.In the end,this paper tests and verifies this theory of ecological optimization,taking Qionghai city in Hainan Province as an example.展开更多
基金Supported by the Beijing Municipal Science&Technology Commission(Z211100004421012),the Key Reaserch and Development Pro⁃gram of China(2022YFF0605902)。
文摘In this paper,a linear optimization method(LOM)for the design of terahertz circuits is presented,aimed at enhancing the simulation efficacy and reducing the time of the circuit design workflow.This method enables the rapid determination of optimal embedding impedance for diodes across a specific bandwidth to achieve maximum efficiency through harmonic balance simulations.By optimizing the linear matching circuit with the optimal embedding impedance,the method effectively segregates the simulation of the linear segments from the nonlinear segments in the frequency multiplier circuit,substantially improving the speed of simulations.The design of on-chip linear matching circuits adopts a modular circuit design strategy,incorporating fixed load resistors to simplify the matching challenge.Utilizing this approach,a 340 GHz frequency doubler was developed and measured.The results demonstrate that,across a bandwidth of 330 GHz to 342 GHz,the efficiency of the doubler remains above 10%,with an input power ranging from 98 mW to 141mW and an output power exceeding 13 mW.Notably,at an input power of 141 mW,a peak output power of 21.8 mW was achieved at 334 GHz,corresponding to an efficiency of 15.8%.
基金Support by Ontario Research FoundationMc Master Advanced Control ConsortiumFundacao para a Ciência e Tecnologia(Investigador FCT 2013 program and project UID/MAT/04561/2013)
文摘The scheduling of gasoline-blending operations is an important problem in the oil refining industry. Thisproblem not only exhibits the combinatorial nature that is intrinsic to scheduling problems, but alsonon-convex nonlinear behavior, due to the blending of various materials with different quality properties.In this work, a global optimization algorithm is proposed to solve a previously published continuous-timemixed-integer nonlinear scheduling model for gasoline blending. The model includes blend recipe optimi-zation, the distribution problem, and several important operational features and constraints. The algorithmemploys piecewise McCormick relaxation （PMCR） and normalized multiparametric disaggregation tech-nique （NMDT） to compute estimates of the global optimum. These techniques partition the domain of oneof the variables in a bilinear term and generate convex relaxations for each partition. By increasing the num-ber of partitions and reducing the domain of the variables, the algorithm is able to refine the estimates ofthe global solution. The algorithm is compared to two commercial global solvers and two heuristic methodsby solving four examples from the literature. Results show that the proposed global optimization algorithmperforms on par with commercial solvers but is not as fast as heuristic approaches.
基金Supported by the Natural Science Foundation of Zhejiang Province(No.LQ22F030015).
文摘This work addresses the cut order planning(COP)problem for multi-color garment production,which is the first step in the clothing industry.First,a multi-objective optimization model of multicolor COP(MCOP)is established with production error and production cost as optimization objectives,combined with constraints such as the number of equipment and the number of layers.Second,a decoupled multi-objective optimization algorithm(DMOA)is proposed based on the linear programming decoupling strategy and non-dominated sorting in genetic algorithmsⅡ(NSGAII).The size-combination matrix and the fabric-layer matrix are decoupled to improve the accuracy of the algorithm.Meanwhile,an improved NSGAII algorithm is designed to obtain the optimal Pareto solution to the MCOP problem,thereby constructing a practical intelligent production optimization algorithm.Finally,the effectiveness and superiority of the proposed DMOA are verified through practical cases and comparative experiments,which can effectively optimize the production process for garment enterprises.
文摘A class of trust region methods for solving linear inequality constrained problems is proposed in this paper. It is shown that the algorithm is of global convergence.The algorithm uses a version of the two-sided projection and the strategy of the unconstrained trust region methods. It keeps the good convergence properties of the unconstrained case and has the merits of the projection method. In some sense, our algorithm can be regarded as an extension and improvement of the projected type algorithm.
文摘In this paper we prove that a class of trust region methods presented in part I is superlinearly convergent. Numerical tests are reported thereafter. Results by solving a set of typical problems selected from literatures have demonstrated that our algorithm is effective.
基金Supported by the National Basic Research Program of China(2012CB720500)the National Natural Science Foundation of China(U1462206)
文摘Gasoline blending is a key process in a petroleum refinery, as it can yield 60%–70% of a typical refinery's total revenue. This process not only exhibits non-convex nonlinear blending behavior due to the complicated blend mechanism of various component feedstocks with different quality properties, but also involves global optimum searching among numerous blending recipes. Since blend products are required to meet a series of quality requirements and highly-sensitive to the proportion changes of blending feedstocks, global optimization methods for NLP problems are often difficult to be applied because of heavy computational burdens. Thus, piecewise linearization methods are naturally proposed to provide an approximate global optimum solution by adding binary variables into the models and converting the original NLP problems into MILP ones. In this paper, Logarithmtransform piecewise linearization(LTPL) method, an improved piecewise linearization, is proposed. In this method a logarithm transform is applied to convert multi-variable multi-degree constraints into a series of single-variable constraints. As a result, the number of 0–1 variables is greatly reduced. In the final part of this paper, an industrial case study is conducted to demonstrate the effectiveness of LTPL method. In principle, this method would be useful for blending problems with complicated empirical or theoretical models.
基金Foundation item： Supported by the National Natural Science Foundation of China（10671057） Supported by the Natural Science Foundation of Henan Institute of Science and Technology（06054）
文摘In this paper, a global optimization algorithm is proposed for nonlinear sum of ratios problem （P）. The algorithm works by globally solving problem （P1） that is equivalent to problem （P）, by utilizing linearization technique a linear relaxation programming of the （P1） is then obtained. The proposed algorithm is convergent to the global minimum of （P1） through the successive refinement of linear relaxation of the feasible region of objective function and solutions of a series of linear relaxation programming. Numerical results indicate that the proposed algorithm is feasible and can be used to globally solve nonlinear sum of ratios problems （P）.
文摘A improving Steady State Genetic Algorithm for global optimization over linear constraint non-convex programming problem is presented. By convex analyzing, the primal optimal problem can be converted to an equivalent problem, in which only the information of convex extremes of feasible space is included, and is more easy for GAs to solve. For avoiding invalid genetic operators, a redesigned convex crossover operator is also performed in evolving. As a integrality, the quality of two problem is proven, and a method is also given to get all extremes in linear constraint space. Simulation result show that new algorithm not only converges faster, but also can maintain an diversity population, and can get the global optimum of test problem.
基金Supported by the National Natural Science Foundation of China General Programs(Nos.61072112,61372186)the National Natural Science Foundation of China Key Program(No.60890071)
文摘Downward Looking Sparse Linear Array Three Dimensional SAR(DLSLA 3D SAR) is an important form of 3D SAR imaging, which has a widespread application field. Since its practical equivalent phase centers are usually distributed sparsely and nonuniformly, traditional 3D SAR algorithms suffer from low resolution and high sidelobes in cross-track dimension. To deal with this problem, this paper introduces a method based on back-projection and convex optimization to achieve 3D high accuracy imaging reconstruction. Compared with traditional SAR algorithms, the proposed method sufficiently utilizes the sparsity of the 3D SAR imaging scene and can achieve lower sidelobes and higher resolution in cross-track dimension. In the simulated experiments, the reconstructed results of both simple and complex imaging scene verify that the proposed method outperforms 3D back-projection algorithm and shows satisfying cross-track dimensional resolution and good robustness to noise.
文摘This paper presents a global optimization approach to solving linear non-quadratic optimal control problems. The main work is to construct a differential flow for finding a global minimizer of the Hamiltonian function over a Euclid space. With the Pontryagin principle, the optimal control is characterized by a function of the adjoint variable and is obtained by solving a Hamiltonian differential boundary value problem. For computing an optimal control, an algorithm for numerical practice is given with the description of an example.
基金the National Natural Science Foundation of China(Nos.71871181 and 71471147)the Overseas Expertise Introduction Project for Discipline Innovation(No.B13044)the Top International University Visiting Program for Outstanding Young Scholars of Northwestern Polytechnical University(No.201806295008)。
文摘The linear consecutive-k-out-of-n:failure(good)(Lin/Con/k/n:F(G))system consists of n interchangeable components that have different reliabilities.These components are arranged in a line path and different component assignments change the system reliability.The optimization of Lin/Con/k/n:F(G)system is to find an optimal component assignment to maximize the system reliability.As the number of components increases,the computation time for this problem increases considerably.In this paper,we propose a Birnbaum importance-based ant colony optimization(BIACO)algorithm to obtain quasi optimal assignments for such problems.We compare its performance using the Birnbaum importance based two-stage approach(BITA)and Birnbaum importancebased genetic local search(BIGLS)algorithm from previous researches.The experimental results show that the BIACO algorithm has a good performance in the optimization of Lin/Con/k/n:F(G)system.
基金support by Basic Science Research Program through the National Research Foundation(NRF)funded by Korea Ministry of Education(No.2016R1A6A1A0312812).
文摘The aim of this work is to employ a modified cell-based smoothed finite element method(S-FEM)for topology optimization with the domain discretized with arbitrary polygons.In the present work,the linear polynomial basis function is used as the weight function instead of the constant weight function used in the standard S-FEM.This improves the accuracy and yields an optimal convergence rate.The gradients are smoothed over each smoothing domain,then used to compute the stiffness matrix.Within the proposed scheme,an optimum topology procedure is conducted over the smoothing domains.Structural materials are distributed over each smoothing domain and the filtering scheme relies on the smoothing domain.Numerical tests are carried out to pursue the performance of the proposed optimization by comparing convergence,efficiency and accuracy.
基金National Key Science & Technology Special Projects(Grant No.2008ZX05000-004)CNPC Projects(Grant No.2008E-0610-10).
文摘How to extract optimal composite attributes from a variety of conventional seismic attributes to detect reservoir features is a reservoir predication key,which is usually solved by reducing dimensionality.Principle component analysis（PCA） is the most widely-used linear dimensionality reduction method at present.However,the relationships between seismic attributes and reservoir features are non-linear,so seismic attribute dimensionality reduction based on linear transforms can＇t solve non-linear problems well,reducing reservoir prediction precision.As a new non-linear learning method,manifold learning supplies a new method for seismic attribute analysis.It can discover the intrinsic features and rules hidden in the data by computing low-dimensional,neighborhood-preserving embeddings of high-dimensional inputs.In this paper,we try to extract seismic attributes using locally linear embedding（LLE）,realizing inter-horizon attributes dimensionality reduction of 3D seismic data first and discuss the optimization of its key parameters.Combining model analysis and case studies,we compare the dimensionality reduction and clustering effects of LLE and PCA,both of which indicate that LLE can retain the intrinsic structure of the inputs.The composite attributes and clustering results based on LLE better characterize the distribution of sedimentary facies,reservoir,and even reservoir fluids.
基金Supported by the National Natural Science Foundation of China (60672104,10675013)the Na-tional Basic Research Program of China ("973"Program)(2006CB705705)+1 种基金the 10th Five-Year Plan of the Ministry of Science and Technology of China(2001BA706B-05)the Joint Research Foundation of Beijing Municipal Commissionof Education~~
文摘A method for designing an X-ray flatness filter for medical electron linac is developed. It is used in the optimization process in the electron beam radiation system. Monte Carlo simulation method is used and two examples of real radiation system optimization processes for China-made medical electron linac are provided： 15 MV X- ray system of BJ-20 linac, and 12 MeV electron system of BJ-14. Results are verified by using the traditional method.
基金The research is supported by NSF of China (10371113 10471133)
文摘The main aim of this article is to study the approximation of a locking-free anisotropic nonconforming finite element for the pure displacement boundary value problem of planar linear elasticity. The optimal error estimates are obtained by using some novel approaches and techniques. The method proposed in this article is robust in the sense that the convergence estimates in the energy and L^2-norms are independent-of the Lame parameter λ.
基金Sponsored by Beijing Social Science Foundation of China(14JGC110)Social Science Research Common Program of Beijing Municipal Commission of Education of China(SM201510038011)CUEB Foundation of China(2014XJG005)
文摘Byproduct gas is an important secondary energy in iron and steel industry, and its optimization is vital to cost reduction. With the development of iron and steel industry to be more eco-friendly, it is necessary to construct an integrated optimized system, taking economics, energy consumption and environment into consideration. Therefore, the environmental cost caused by pollutants discharge should be factored in total cost when optimizing byproduct gas distribution. A green mixed integer linear programming （MILP） model for the optimization of byproduct gases was established to reduce total cost, including both operation cost and environmental cost. The operation cost included penalty for gas deviation, costs of fuel and water consumption, holder booster trip penalty, and so forth; while the environmental cost consisted of penalties for both direct and indirect pollutants discharge. Case study showed that the proposed model brought an optimum solution and 2.2% of the total cost could be reduced compared with previous one.
基金supported by the Doctoral Foundation of Qingdao University of Science and Technology(0022330).
文摘The problem of robustifying linear quadratic regulators （LQRs） for a class of uncertain affine nonlinear systems is considered. First, the exact linearization technique is used to transform an uncertain nonlinear system into a linear one and an optimal LQR is designed for the corresponding nominal system. Then, based on the integral sliding mode, a design approach to robustifying the optimal regulator is studied. As a result, the system exhibits global robustness to uncertainties and the ideal sliding mode dynamics is the same as that of the optimal LQR for the nominal system. A global robust optimal sliding mode control （GROSMC） is realized. Finally, a numerical simulation is demonstrated to show the effectiveness and superiority of the proposed algorithm compared with the conventional optimal LQR.
基金Projects(51275235, 50975135) supported by the National Natural Science Foundation of ChinaProject(U0934004) supported by the Natural Science Foundation of Guangdong Province, ChinaProject(2011CB707602) supported by the National Basic Research Program of China
文摘A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 ram/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.
文摘Optimization of land use structure consists of economic and social and ecological optimization.Applying the minds of system engineering and principles of ecology,this paper presents such thoughts:the optimal forest_coverage rate calculated according to the reality of a district is set as main standard of ecological rationality in the district;through considering the value of ecosystem services of the land with GREEN equivalent (mainly cultivated land and grassland)and based on the rule,GREEN equivalent,this paper introduces the area conversion between woodland and cultivated land,also between woodland and grassland;this paper establishes a multi_dimension controlling model of optimization of land use structure.In addition,a multi_objective linear programming model for optimization of land use structure is designed.In the end,this paper tests and verifies this theory of ecological optimization,taking Qionghai city in Hainan Province as an example.
