Lineament extraction and analysis is one of the routine work in mapping medium and large areas using remote sensing data, most of which are satellite images. Landsat Enhanced Thematic Mapper （ETM） of 945×1 232 ...Lineament extraction and analysis is one of the routine work in mapping medium and large areas using remote sensing data, most of which are satellite images. Landsat Enhanced Thematic Mapper （ETM） of 945×1 232 pixels subscene acquired on 21 March 2000 covering the northwestern part of Yunnan Province has been digitally processed using ER Mapper software. This article aims to produce lineament density map that predicts favorable zones for hydrothermal mineral occurrences and quantify spatial associations between the known hydrothermal mineral deposits. In the process of lineament extraction a number of image processing techniques were applied. The extracted lineaments were imported into MapGIS software and a suitable grid of 100 m×100 m was chosen. The Kriging method was used to create the lineament density map of the area. The results show that remote sensing data could be useful to extract the lineaments in the area. These lineaments are closely correlated with the faults obtained through other geological investigation methods. On comparing with field data the lineament-density map identifies two important high prospective zones, where large-scale deposits are already existing. In addition the map highlights unrecognized target areas that require follow up investigation.展开更多
Characterized by lithological diversity and rich mineral resources, Benshangul-Gumuz National Regional State located in Asosa Zones, Western Ethiopia has been investigated for geological mapping and morpho-structural ...Characterized by lithological diversity and rich mineral resources, Benshangul-Gumuz National Regional State located in Asosa Zones, Western Ethiopia has been investigated for geological mapping and morpho-structural lineaments extraction using PALSAR (Phased Array type L-band Synthetic Aperture Radar ) Fine Beam Single (FBS) L-HH polarization and Landsat-5 TM (Thematic Mapper ) datasets. These data were preprocessed to retrieve ground surface reflectance and backscatter coefficients. To overcome the geometry acquisition between the two sensors, they were geometrically and topographically rectified using ASTER-V2 DEM. Intensity-Hue-Saturation, directional filters and automatic lineaments extraction were applied on the datasets for lithological units’ discrimination and structural delimitation for potential mineral exploration. The obtained results showed good relationship among the topographic morphology, rock-substrate, structural variations properties, and drainage network. The spectral variations were easily associated with lithological units. Likewise, the morpho-structural information highlighted in the PALSAR image was visible without altering the radiometric integrity of the details in TM bands through the fusion process. Moreover, predominant lineaments directions trending NE-SW, NS, and NW-SE were identified. Results of this study highlighted the importance of the PALSAR FBS L-HH mode and TM data fusion to enhance geological features and lithological units for mineral exploration particularly in tropical zones.展开更多
The region of investigation is part of the western desert of Iraq covering an area of about 12,400 km2, this region includes several large wadis discharging to the Euphrates River. Since the Tectonic features in parti...The region of investigation is part of the western desert of Iraq covering an area of about 12,400 km2, this region includes several large wadis discharging to the Euphrates River. Since the Tectonic features in particular fault zones play a significant role with respect to groundwater flow in hard rock terrains. The present research is focus on investigate lineaments that have been classified as suspected faults by means of remote sensing techniques and digital terrain evaluation in combination with interpolating groundwater heads and MLU pumping tests model in a fractured rock aquifer, Lineaments extraction approach is illustrated a fare matching with suspected faults, moreover these lineaments conducted an elevated permeability zone.展开更多
The Salmas geothermal field is located in NW Iran. Subduction of Neo-Tethys oceanic crust beneath the Iranian microcontinent caused to propagation of the magmatic-Arc. Fractures and faults in the convergent zone have ...The Salmas geothermal field is located in NW Iran. Subduction of Neo-Tethys oceanic crust beneath the Iranian microcontinent caused to propagation of the magmatic-Arc. Fractures and faults in the convergent zone have created path-ways for the circulation of geothermal fluid. Fracture concentration in the Salmas geothermal field has been characterized using of the fractal method and creation of a fracture density map that shows the highest concentration in the central part of the study area. The permeability of fractures has been evaluated by analyzing their orientation in respect to the paleostress axes. Also, the fractal analyzing result indicates the maximum fractal dimension（1.96） is around the thermal spring outlet. Paleostress analyzing revealed that in the central part of the study area, σ1 axes orientation is S90°W/10° and the σ2 dip is near to the vertical in this stress field, where strike slip faults can be propagated. In the SE part near the recharge of the thermal springs, the σ3 plunge increases to 70？ and σ1 orientation is N15°E/20°, in this local tectonic regime thrust fault developed. Fractures have an important role in the circulation of fluid and the fractal dimension increases near the thermal springs in the Salmas geothermal field. Regarding the paleostress data fracture with N-S direction such as the F1 fault zone（parallel to the σ1 axes）, a suitable pathway for deep circulation of geothermal fluid flow has been created.展开更多
文摘Lineament extraction and analysis is one of the routine work in mapping medium and large areas using remote sensing data, most of which are satellite images. Landsat Enhanced Thematic Mapper （ETM） of 945×1 232 pixels subscene acquired on 21 March 2000 covering the northwestern part of Yunnan Province has been digitally processed using ER Mapper software. This article aims to produce lineament density map that predicts favorable zones for hydrothermal mineral occurrences and quantify spatial associations between the known hydrothermal mineral deposits. In the process of lineament extraction a number of image processing techniques were applied. The extracted lineaments were imported into MapGIS software and a suitable grid of 100 m×100 m was chosen. The Kriging method was used to create the lineament density map of the area. The results show that remote sensing data could be useful to extract the lineaments in the area. These lineaments are closely correlated with the faults obtained through other geological investigation methods. On comparing with field data the lineament-density map identifies two important high prospective zones, where large-scale deposits are already existing. In addition the map highlights unrecognized target areas that require follow up investigation.
文摘Characterized by lithological diversity and rich mineral resources, Benshangul-Gumuz National Regional State located in Asosa Zones, Western Ethiopia has been investigated for geological mapping and morpho-structural lineaments extraction using PALSAR (Phased Array type L-band Synthetic Aperture Radar ) Fine Beam Single (FBS) L-HH polarization and Landsat-5 TM (Thematic Mapper ) datasets. These data were preprocessed to retrieve ground surface reflectance and backscatter coefficients. To overcome the geometry acquisition between the two sensors, they were geometrically and topographically rectified using ASTER-V2 DEM. Intensity-Hue-Saturation, directional filters and automatic lineaments extraction were applied on the datasets for lithological units’ discrimination and structural delimitation for potential mineral exploration. The obtained results showed good relationship among the topographic morphology, rock-substrate, structural variations properties, and drainage network. The spectral variations were easily associated with lithological units. Likewise, the morpho-structural information highlighted in the PALSAR image was visible without altering the radiometric integrity of the details in TM bands through the fusion process. Moreover, predominant lineaments directions trending NE-SW, NS, and NW-SE were identified. Results of this study highlighted the importance of the PALSAR FBS L-HH mode and TM data fusion to enhance geological features and lithological units for mineral exploration particularly in tropical zones.
文摘The region of investigation is part of the western desert of Iraq covering an area of about 12,400 km2, this region includes several large wadis discharging to the Euphrates River. Since the Tectonic features in particular fault zones play a significant role with respect to groundwater flow in hard rock terrains. The present research is focus on investigate lineaments that have been classified as suspected faults by means of remote sensing techniques and digital terrain evaluation in combination with interpolating groundwater heads and MLU pumping tests model in a fractured rock aquifer, Lineaments extraction approach is illustrated a fare matching with suspected faults, moreover these lineaments conducted an elevated permeability zone.
基金supported financially by Urmia Universitythe Renewable Energy Department of the Niroo Research Institute(NRI)
文摘The Salmas geothermal field is located in NW Iran. Subduction of Neo-Tethys oceanic crust beneath the Iranian microcontinent caused to propagation of the magmatic-Arc. Fractures and faults in the convergent zone have created path-ways for the circulation of geothermal fluid. Fracture concentration in the Salmas geothermal field has been characterized using of the fractal method and creation of a fracture density map that shows the highest concentration in the central part of the study area. The permeability of fractures has been evaluated by analyzing their orientation in respect to the paleostress axes. Also, the fractal analyzing result indicates the maximum fractal dimension（1.96） is around the thermal spring outlet. Paleostress analyzing revealed that in the central part of the study area, σ1 axes orientation is S90°W/10° and the σ2 dip is near to the vertical in this stress field, where strike slip faults can be propagated. In the SE part near the recharge of the thermal springs, the σ3 plunge increases to 70？ and σ1 orientation is N15°E/20°, in this local tectonic regime thrust fault developed. Fractures have an important role in the circulation of fluid and the fractal dimension increases near the thermal springs in the Salmas geothermal field. Regarding the paleostress data fracture with N-S direction such as the F1 fault zone（parallel to the σ1 axes）, a suitable pathway for deep circulation of geothermal fluid flow has been created.
