In this paper,the simultaneous resonance of a ferromagnetic thin plate in a time-varying magnetic field,having axial speed and being subjected to a periodic line load,is studied.Based on the large deflection theory of...In this paper,the simultaneous resonance of a ferromagnetic thin plate in a time-varying magnetic field,having axial speed and being subjected to a periodic line load,is studied.Based on the large deflection theory of thin plates and electromagnetic field theory,the nonlinear vibration differential equation of the plate is obtained by using the Hamilton′s principle and the Galerkin method.Then the boundary condition in which the longer opposite sides are clamped and hinged is considered.The dimensionless nonlinear differential equations are solved by using the method of multiple scales,and the analytical solution is given.In addition,the stability analysis is also carried out by using Lyapunov stability theory.Through numerical analysis,the variation curves of system resonance amplitude with frequency tuning parameter,magnetic field strength and external excitation amplitude are obtained.Different parameters that have significant effects on the response of the system,such as the thickness,the axial velocity,the magnetic field intensity,the position,and the frequency of external excitation,are considered and analyzed.The results show that the system has multiple solution regions and obvious nonlinear coupled characteristics.展开更多
Half-space Green's function due to a spatially harmonic line load has been expressed as a sum of the full-space Green's functions and a 2-D integral representation of the reflected waves by the free surface of...Half-space Green's function due to a spatially harmonic line load has been expressed as a sum of the full-space Green's functions and a 2-D integral representation of the reflected waves by the free surface of the half-space.By using the obtained half-space Green's function,an integral rep- resentation of the scattered waves by a cylindrical obstacle is then derived.Finally,by analyzing the far-zone behavior of the integrands of the integral representation.the far-field pattern of the scattered waves in a half-space obtained.展开更多
The dynamic response of a double infinite beam system connected by a viscoelastic foundation under the harmonic line load is studied. The double infinite beam system consists of two identical and parallel beams, and t...The dynamic response of a double infinite beam system connected by a viscoelastic foundation under the harmonic line load is studied. The double infinite beam system consists of two identical and parallel beams, and the two beams are infinite elastic homogeneous and isotropic. A viscoelastic layer connects the two beams continuously. To decouple the two coupled equations governing the response of the double infinite beam system, a variable substitution method is introduced. The frequency domain solutions of the decoupled equations are obtained by using Fourier transforms as well as Laplace transforms successively. The time domain solution in the generalized integral form are then obtained by employing the corresponding inverse transforms, i.e. Fourier transform and inverse Laplace transform. The solution is verified by numerical examples, and the effects of parameters on the response are also investigated.展开更多
The dynamic response of an infinite Euler–Bernoulli beam resting on Pasternak foundation under inclined harmonic line loads is developed in this study in a closed-form solution.The conventional Pasternak foundation i...The dynamic response of an infinite Euler–Bernoulli beam resting on Pasternak foundation under inclined harmonic line loads is developed in this study in a closed-form solution.The conventional Pasternak foundation is modeled by two parameters wherein the second parameter can account for the actual shearing effect of soils in the vertical direction.Thus,it is more realistic than the Winkler model,which only represents compressive soil resistance.However,the Pasternak model does not consider the tangential interaction between the bottom of the beam and the foundation;hence,the beam under inclined loads cannot be considered in the model.In this study,a series of horizontal springs is diverted to the face between the bottom of the beam and the foundation to address the limitation of the Pasternak model,which tends to disregard the tangential interaction between the beam and the foundation.The horizontal spring reaction is assumed to be proportional to the relative tangential displacement.The governing equation can be deduced by theory of elasticity and Newton’s laws,combined with the linearly elastic constitutive relation and the geometric equation of the beam body under small deformation condition.Double Fourier transformation is used to simplify the geometric equation into an algebraic equation,thereby conveniently obtaining the analytical solution in the frequency domain for the dynamic response of the beam.Double Fourier inverse transform and residue theorem are also adopted to derive the closed-form solution.The proposed solution is verified by comparing the degraded solution with the known results and comparing the analytical results with numerical results using ANSYS.Numerical computations of distinct cases are provided to investigate the effects of the angle of incidence and shear stiffness on the dynamic response of the beam.Results are realistic and can be used as reference for future engineering designs.展开更多
In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on...In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on the elastic-plasticity theory, and under the consideration of the effect of tube size, material mechanical parameters, friction coefficient and loading paths, the external pressure plastic forming mechanical model of metal stator screw lining is established, to study the optimal loading path of metal stator lining tube hydroforming process. The results show that wall thickness reduction of the external pressure tube hydroforming(THF) is about 4%, and three evaluation criteria of metal stator screw lining forming quality are presented: fillet stick mold coefficient, thickness relative error and forming quality coefficient. The smaller the three criteria are, the better the forming quality is.Each indicator has a trend of increase with the loading rate reducing, and the adjustment laws of die arc transition zone equidistance profile curve are acquired for improving tube forming quality. Hence, the research results prove the feasibility of external pressure THF used for processing high-accuracy large length-to-diameter ratio metal stator screw lining, and provide theoretical basis for designing new kind of stator structure which has better performance and longer service life.展开更多
The paper deals with a lossy transmission line terminated at both ends by non-linear RCL elements. The mixed problem for the hyperbolic system, describing the transmission line, to an initial value problem for a neutr...The paper deals with a lossy transmission line terminated at both ends by non-linear RCL elements. The mixed problem for the hyperbolic system, describing the transmission line, to an initial value problem for a neutral equation is reduced. Sufficient conditions for the existence and uniqueness of periodic regimes are formulated. The proof is based on the finding out of suitable operator whose fixed point is a periodic solution of the neutral equation. The method has a good rate of convergence of the successive approximations even for high frequencies.展开更多
Adaptive bit-loading algorithms can improve the performance of OFDM systems significantly. The tradeoff between the performance of the algorithm and its computational complexity is essential for the implementation of ...Adaptive bit-loading algorithms can improve the performance of OFDM systems significantly. The tradeoff between the performance of the algorithm and its computational complexity is essential for the implementation of loading algorithms. In this paper, we present a low complexity non-iterative discrete bit-loading algorithm to maximize the data rate subject to specified target BER and uniform power allocation. Simulation results show that the proposed algorithm outperforms the equal-BER loading and achieves similar rates to incremental allocation, yet with much lower complexity.展开更多
Adaptive bit-loading is a key technology in high speed power line communications with the Orthogonal Frequency Division Multiplexing (OFDM) modulation technology. According to the real situation of the transmitting po...Adaptive bit-loading is a key technology in high speed power line communications with the Orthogonal Frequency Division Multiplexing (OFDM) modulation technology. According to the real situation of the transmitting power spectrum limited in high speed power line communications, this paper explored the adaptive bit loading algorithm to maximize transmission bit number when transmitting power spectral density and bit error rate are not exceed upper limit. With the characteristics of the power line channel, first of all, it obtains the optimal bit loading algorithm, and then provides the improved algorithm to reduce the computational complexity. Based on the analysis and simulation, it offers a non-iterative bit allocation algorithm, and finally the simulation shows that this new algorithm can greatly reduce the computational complexity, and the actual bit allocation results close to optimal.展开更多
The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear li...The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear line loads is consid- ered. The analytic expression for the combined mode stress intensity factors as a function of time is obtained. The method of solution is based on the application of integral transforms and the Wiener-Hopf technique. Some features of the solutions are discussed and graphical numerical results are presented.展开更多
This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less impor...This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less importance in controlling the maximum response to impulsive loadings because the maximum response is reached in a very short time,before the damping forces can dissipate a significant portion of the energy input into the system.The development of two sine series solutions,relating to different types of impulsive loadings,one involving a single concentrated force and the other a distributed line load,are presented.This study revealed that when a simply supported Euler-Bernoulli beam,resting on a Winkler soil model,is subject to an impact load,the resulting vertical displacements,bending moments and shear forces produced along the span of the beam are considerably affected.In particular,the quantification of this effect is best observed,relative to the corresponding static solution,via an amplification factor.The computed impact amplification factors,for the sub-grade moduli used in this study,were in magnitude greater than 2,thus confirming the multiple-degree-of-freedom nature of the problem.展开更多
The boundary between the near and far fields is generally defined as the distance from the vibration source beyond which ground vibrations are mainly dominated by Rayleigh waves. It is closely related to the type of v...The boundary between the near and far fields is generally defined as the distance from the vibration source beyond which ground vibrations are mainly dominated by Rayleigh waves. It is closely related to the type of vibration source and the soil properties. Based on the solutions of the Lamb＇s problem, the boundary at the surface between the near and far fields of ground vibration was investigated for a harmonic vertical concentrated load and an infinite line load at the surface of a visco-elastic half-space. Particularly, the variation of the boundary with the material damping was investigated for both cases. The results indicate that the material damping slightly contributes to the attenuation of vibrations in the near-source region, but significantly reduces the vibrations in the region that is at some distance away from the source. When taking the material damping into consideration, the boundary between the near and far fields tends to move towards the vibration source. Compared with the vibrations caused by a concentrated load, the vibrations induced by an infinite line load can affect a larger range of the surrounding environment, and they attenuate more slowly. This means the boundary between the near field and far field should move fitrther away from the source. Finally, the boundaries are defined in terms of R-wave length （2R） and Poisson ratio of the ground （o）. For the case of a point load, the boundary is located at the distance of （5.0-6.0）2R for v≤0.30 and at the distance of （2.0--3.0）2R for v≥0.35. For the case of an infinite line load, the boundary is located at the distance （5.5-6.5）2rt for v≤0.30 and at the distance （2.5--3.5）2R for v≥0.35.展开更多
An analytical solution to the transient dynamic response of a cylindrical lining subjected to an internal loading was presented and the dynamic interaction between the lining and surrounding soil was considered. The l...An analytical solution to the transient dynamic response of a cylindrical lining subjected to an internal loading was presented and the dynamic interaction between the lining and surrounding soil was considered. The lining structure and the soil were treated as a cylindrical elastic shell and an infinite elastic compressible medium, respectively. A two-dimensional axisymmetric wave equation was derived from the governing equation of displacement by introducing the potential functions. Shell equation of motion was established based on continuity conditions. The closed-form solution for dynamic response of the lining due to an impact loading was obtained in Laplace transforms and inverse transforms. Detailed parametric studies were also presented to illustrate the influences of the Poisson ratio of soil, the dynamic shear moduli of both soil and lining and the thickness of lining on dynamic response of the lining.展开更多
Based on the theory of impact dynamics, the motion equations for a mooring line-floating body system before and after impact loading are established with consideration of the viscoelastic property of mooring lines. Th...Based on the theory of impact dynamics, the motion equations for a mooring line-floating body system before and after impact loading are established with consideration of the viscoelastic property of mooring lines. The factors that influence the taut-slack conditions of a mooring system are analyzed through classifying the taut-slack regions, which are defined by non-dimensional ratios of displacement, frequency, and damping of the system. The mooring system of Jip spar platform is analyzed, and the snap tension characteristics of mooring lines are given. The factors that influence the maximum tension in mooring lines, including the mass of the floating body, length of mooring lines, frequency and amplitude of external excitation, and pretension in mooting lines, are also analyzed through computing the dynamic response of system and parametric study. It is shown that the maximum tension increases with the increasing mass of the floating body, external excitation and pretension. Also, it is found that the influence of the non-dimensional ratio of damping increases with the increase of the pretension in mooring lines.展开更多
This paper introduces AC variable-speed driving control technology application in the continuous annealing line,including the drive system configuration,the driving control characteristics of CAL and the main control ...This paper introduces AC variable-speed driving control technology application in the continuous annealing line,including the drive system configuration,the driving control characteristics of CAL and the main control functions of the drive system.Firstly introduces the main process of the continuous annealing line,the features of the 6SE70 series common DC bus drive system and the G150 series drive system. Secondly,for the continuous annealing line,there are more strict requirements for the continuity of production and more special requirements for the drive control characteristics.We do a lot of improvement and standardization for the driving control functions and the interfaces of the line automation control system. This paper discusses the communication interface specifications and the dimension transformation methods between the drive and the basic automation system.The detail dimension transformation methods and calculation method about the line speed setting and the actual roller dimension setting are given,and detail description for the calculation method of the reference speed in the drive.Article also emphasized illustrates realizing and testing methods of inertia compensation of equipment in the drives,and standardize the value of line accelerate and decelerate rate,and the inertia test method and inertia compensation coefficient calculation method is introduced in this paper.For the bridge rollers and furnace help rollers load balance control,this paper presents two different load balance control strategies,the load balance control principle for bridge rollers which data communicates from main station to slave stations by Simolink,and the load balance control principle for furnace help rollers which use droop control.The different characteristics of those two methods are stated in detail.展开更多
A slip-line field solution is presented for the ultimate bearing capacity of the pipeline on a purely-cohesive clay soil, taking into account the circular configuration of the pipe, the pipe embedment, and the pipe-so...A slip-line field solution is presented for the ultimate bearing capacity of the pipeline on a purely-cohesive clay soil, taking into account the circular configuration of the pipe, the pipe embedment, and the pipe-soil interfacial cohesion. The derived bearing capacity factors for a smooth rigid pipe limit to those for the conventional rectangular strip footing while the pipe embedment approaches zero. Parametric studies indicate that, the pipe-soil interfacial properties have much influence on the bearing capacity for the pipe foundation on clayedy soils.展开更多
Based on the rigid-plastic theory, the finite element method (FEM) equation which incorporates the influence of impact load and volume force is presented. The hammer forging theory for simulation is also given. On the...Based on the rigid-plastic theory, the finite element method (FEM) equation which incorporates the influence of impact load and volume force is presented. The hammer forging theory for simulation is also given. On the basis of technological analyses, the piston skirt forging processes of LD11 aluminium alloy are simulated under both mechanical pressure forging and hammer forging conditions. By comparison with the metal flow, fibre flow lines, distributions of strain and temperature of the two forging methods, practical forging was carried out and the product quality was controlled. The deformation pattern of the piston skirt forging process was determined by comparing the simulation results with the practical forging results.展开更多
This paper gives an insight on the effect of transmission line temperature variations, resulting from loading and weather conditions changes, on a power system＇s steady state and dynamic performance. The impact of dy...This paper gives an insight on the effect of transmission line temperature variations, resulting from loading and weather conditions changes, on a power system＇s steady state and dynamic performance. The impact of dynamic load models on system stability is also studied. The steady-state and dynamic stability simulation results of a 39 bus system for constant line impedance （the traditional simulation practice） are compared to the results with estimated, but realistic, temperature varied line impedances using PSLF （positive sequence load flow） software. The modulated line impedances will affect the thermal loading levels and voltage profiles of buses under steady state response, while the dynamic results will show improved damping in electro-mechanical oscillations at generator buses.展开更多
Security constrained multi area multi objective dynamic economic dispatch (SCMAMODED) with renewable energy (RE) and all the possible MTDC stability constraints is formulated for the first time. The stability merits o...Security constrained multi area multi objective dynamic economic dispatch (SCMAMODED) with renewable energy (RE) and all the possible MTDC stability constraints is formulated for the first time. The stability merits of multi terminal DC (MTDC) tie lines as compared to the traditional HVAC forms the main objective of this paper. Probabilistic load flow (PLF) is applied to determine the system parameters while the uncertainties are modelled using Scenario Based Method (SBM). The simulation results reveal that with the use of MTDC tie lines, the frequency and voltage stability in the MAMODED with renewable energy sources (RES) are enhanced while keeping the MTDC power exchange interface nodes at secure levels.展开更多
基金National Natural Science Foundation of China under Grant Nos.12172321 and 11472239Hebei Provincial Natural Science Foundation of China under Grant No.A2020203007Hebei Provincial Graduate Innovation Foundation of China under Grant No.CXZZBS2022146。
文摘In this paper,the simultaneous resonance of a ferromagnetic thin plate in a time-varying magnetic field,having axial speed and being subjected to a periodic line load,is studied.Based on the large deflection theory of thin plates and electromagnetic field theory,the nonlinear vibration differential equation of the plate is obtained by using the Hamilton′s principle and the Galerkin method.Then the boundary condition in which the longer opposite sides are clamped and hinged is considered.The dimensionless nonlinear differential equations are solved by using the method of multiple scales,and the analytical solution is given.In addition,the stability analysis is also carried out by using Lyapunov stability theory.Through numerical analysis,the variation curves of system resonance amplitude with frequency tuning parameter,magnetic field strength and external excitation amplitude are obtained.Different parameters that have significant effects on the response of the system,such as the thickness,the axial velocity,the magnetic field intensity,the position,and the frequency of external excitation,are considered and analyzed.The results show that the system has multiple solution regions and obvious nonlinear coupled characteristics.
文摘Half-space Green's function due to a spatially harmonic line load has been expressed as a sum of the full-space Green's functions and a 2-D integral representation of the reflected waves by the free surface of the half-space.By using the obtained half-space Green's function,an integral rep- resentation of the scattered waves by a cylindrical obstacle is then derived.Finally,by analyzing the far-zone behavior of the integrands of the integral representation.the far-field pattern of the scattered waves in a half-space obtained.
基金National Natural Science Foundation of China under Grant No.51578145
文摘The dynamic response of a double infinite beam system connected by a viscoelastic foundation under the harmonic line load is studied. The double infinite beam system consists of two identical and parallel beams, and the two beams are infinite elastic homogeneous and isotropic. A viscoelastic layer connects the two beams continuously. To decouple the two coupled equations governing the response of the double infinite beam system, a variable substitution method is introduced. The frequency domain solutions of the decoupled equations are obtained by using Fourier transforms as well as Laplace transforms successively. The time domain solution in the generalized integral form are then obtained by employing the corresponding inverse transforms, i.e. Fourier transform and inverse Laplace transform. The solution is verified by numerical examples, and the effects of parameters on the response are also investigated.
基金financially supported by the National Key Research and Development Program of China (no.2016YFC0800206)the National Natural Science Foundation of China (nos.51778260, 51378234, 51678465)
文摘The dynamic response of an infinite Euler–Bernoulli beam resting on Pasternak foundation under inclined harmonic line loads is developed in this study in a closed-form solution.The conventional Pasternak foundation is modeled by two parameters wherein the second parameter can account for the actual shearing effect of soils in the vertical direction.Thus,it is more realistic than the Winkler model,which only represents compressive soil resistance.However,the Pasternak model does not consider the tangential interaction between the bottom of the beam and the foundation;hence,the beam under inclined loads cannot be considered in the model.In this study,a series of horizontal springs is diverted to the face between the bottom of the beam and the foundation to address the limitation of the Pasternak model,which tends to disregard the tangential interaction between the beam and the foundation.The horizontal spring reaction is assumed to be proportional to the relative tangential displacement.The governing equation can be deduced by theory of elasticity and Newton’s laws,combined with the linearly elastic constitutive relation and the geometric equation of the beam body under small deformation condition.Double Fourier transformation is used to simplify the geometric equation into an algebraic equation,thereby conveniently obtaining the analytical solution in the frequency domain for the dynamic response of the beam.Double Fourier inverse transform and residue theorem are also adopted to derive the closed-form solution.The proposed solution is verified by comparing the degraded solution with the known results and comparing the analytical results with numerical results using ANSYS.Numerical computations of distinct cases are provided to investigate the effects of the angle of incidence and shear stiffness on the dynamic response of the beam.Results are realistic and can be used as reference for future engineering designs.
基金Project(51222406)supported by the National Natural Science Foundation of ChinaProject(NCET-12-1061)supported by the Funds for New Century Excellent Talents in University of China+1 种基金Project(12TD007)supported by the Scientific Research Innovation Team Program of Sichuan Colleges and Universities,ChinaProject(2014TD0025)supported by the Youth Scientific Research Innovation Team Program of Sichuan Province,China
文摘In order to meet the high temperature environment requirement of deep and superdeep well exploitation, a technology of large length-to-diameter ratio metal stator screw lining meshing with rotor is presented. Based on the elastic-plasticity theory, and under the consideration of the effect of tube size, material mechanical parameters, friction coefficient and loading paths, the external pressure plastic forming mechanical model of metal stator screw lining is established, to study the optimal loading path of metal stator lining tube hydroforming process. The results show that wall thickness reduction of the external pressure tube hydroforming(THF) is about 4%, and three evaluation criteria of metal stator screw lining forming quality are presented: fillet stick mold coefficient, thickness relative error and forming quality coefficient. The smaller the three criteria are, the better the forming quality is.Each indicator has a trend of increase with the loading rate reducing, and the adjustment laws of die arc transition zone equidistance profile curve are acquired for improving tube forming quality. Hence, the research results prove the feasibility of external pressure THF used for processing high-accuracy large length-to-diameter ratio metal stator screw lining, and provide theoretical basis for designing new kind of stator structure which has better performance and longer service life.
文摘The paper deals with a lossy transmission line terminated at both ends by non-linear RCL elements. The mixed problem for the hyperbolic system, describing the transmission line, to an initial value problem for a neutral equation is reduced. Sufficient conditions for the existence and uniqueness of periodic regimes are formulated. The proof is based on the finding out of suitable operator whose fixed point is a periodic solution of the neutral equation. The method has a good rate of convergence of the successive approximations even for high frequencies.
文摘Adaptive bit-loading algorithms can improve the performance of OFDM systems significantly. The tradeoff between the performance of the algorithm and its computational complexity is essential for the implementation of loading algorithms. In this paper, we present a low complexity non-iterative discrete bit-loading algorithm to maximize the data rate subject to specified target BER and uniform power allocation. Simulation results show that the proposed algorithm outperforms the equal-BER loading and achieves similar rates to incremental allocation, yet with much lower complexity.
基金Supported by the National Natural Science Foundation Project (No. 60872073, No. 60975017, and No. 51075068)Doctoral Fund of Education Ministry (No. 2011009213-0004)
文摘Adaptive bit-loading is a key technology in high speed power line communications with the Orthogonal Frequency Division Multiplexing (OFDM) modulation technology. According to the real situation of the transmitting power spectrum limited in high speed power line communications, this paper explored the adaptive bit loading algorithm to maximize transmission bit number when transmitting power spectral density and bit error rate are not exceed upper limit. With the characteristics of the power line channel, first of all, it obtains the optimal bit loading algorithm, and then provides the improved algorithm to reduce the computational complexity. Based on the analysis and simulation, it offers a non-iterative bit allocation algorithm, and finally the simulation shows that this new algorithm can greatly reduce the computational complexity, and the actual bit allocation results close to optimal.
基金The project supported by the National Natural Science Foundation of China
文摘The dynamic stress intensity factor history for a half plane crack in an otherwise unbounded elastic body, with the crack faces subjected to a traction distribution consisting of two pairs of suddenly-applied shear line loads is consid- ered. The analytic expression for the combined mode stress intensity factors as a function of time is obtained. The method of solution is based on the application of integral transforms and the Wiener-Hopf technique. Some features of the solutions are discussed and graphical numerical results are presented.
基金l’UniversitéLaval for the financial support of his sabbatical year at Dipartimento di Bioscienze e Territorio,Universitàdegli Studi del Molise in Campobasso,Italy。
文摘This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less importance in controlling the maximum response to impulsive loadings because the maximum response is reached in a very short time,before the damping forces can dissipate a significant portion of the energy input into the system.The development of two sine series solutions,relating to different types of impulsive loadings,one involving a single concentrated force and the other a distributed line load,are presented.This study revealed that when a simply supported Euler-Bernoulli beam,resting on a Winkler soil model,is subject to an impact load,the resulting vertical displacements,bending moments and shear forces produced along the span of the beam are considerably affected.In particular,the quantification of this effect is best observed,relative to the corresponding static solution,via an amplification factor.The computed impact amplification factors,for the sub-grade moduli used in this study,were in magnitude greater than 2,thus confirming the multiple-degree-of-freedom nature of the problem.
基金Project(51178342)supported by the National Natural Science Foundation of ChinaProject(KLE-TJGE-C1301)supported by the Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education(Tongji University)under the International Cooperation and Exchange Program,China
文摘The boundary between the near and far fields is generally defined as the distance from the vibration source beyond which ground vibrations are mainly dominated by Rayleigh waves. It is closely related to the type of vibration source and the soil properties. Based on the solutions of the Lamb＇s problem, the boundary at the surface between the near and far fields of ground vibration was investigated for a harmonic vertical concentrated load and an infinite line load at the surface of a visco-elastic half-space. Particularly, the variation of the boundary with the material damping was investigated for both cases. The results indicate that the material damping slightly contributes to the attenuation of vibrations in the near-source region, but significantly reduces the vibrations in the region that is at some distance away from the source. When taking the material damping into consideration, the boundary between the near and far fields tends to move towards the vibration source. Compared with the vibrations caused by a concentrated load, the vibrations induced by an infinite line load can affect a larger range of the surrounding environment, and they attenuate more slowly. This means the boundary between the near field and far field should move fitrther away from the source. Finally, the boundaries are defined in terms of R-wave length （2R） and Poisson ratio of the ground （o）. For the case of a point load, the boundary is located at the distance of （5.0-6.0）2R for v≤0.30 and at the distance of （2.0--3.0）2R for v≥0.35. For the case of an infinite line load, the boundary is located at the distance （5.5-6.5）2rt for v≤0.30 and at the distance （2.5--3.5）2R for v≥0.35.
基金Project(51178342) supported by the National Natural Science Foundation of ChinaProject(20103718120005) supported by Specialized Research Fund for the Doctoral Program of Higher Education,China
文摘An analytical solution to the transient dynamic response of a cylindrical lining subjected to an internal loading was presented and the dynamic interaction between the lining and surrounding soil was considered. The lining structure and the soil were treated as a cylindrical elastic shell and an infinite elastic compressible medium, respectively. A two-dimensional axisymmetric wave equation was derived from the governing equation of displacement by introducing the potential functions. Shell equation of motion was established based on continuity conditions. The closed-form solution for dynamic response of the lining due to an impact loading was obtained in Laplace transforms and inverse transforms. Detailed parametric studies were also presented to illustrate the influences of the Poisson ratio of soil, the dynamic shear moduli of both soil and lining and the thickness of lining on dynamic response of the lining.
基金supported by the National Natural Science Foundation of China (Grant Nos .50679051 and 50639030) the National High Technology Research and Development Program of China (863 Program, Grant No.2007AA09Z304)
文摘Based on the theory of impact dynamics, the motion equations for a mooring line-floating body system before and after impact loading are established with consideration of the viscoelastic property of mooring lines. The factors that influence the taut-slack conditions of a mooring system are analyzed through classifying the taut-slack regions, which are defined by non-dimensional ratios of displacement, frequency, and damping of the system. The mooring system of Jip spar platform is analyzed, and the snap tension characteristics of mooring lines are given. The factors that influence the maximum tension in mooring lines, including the mass of the floating body, length of mooring lines, frequency and amplitude of external excitation, and pretension in mooting lines, are also analyzed through computing the dynamic response of system and parametric study. It is shown that the maximum tension increases with the increasing mass of the floating body, external excitation and pretension. Also, it is found that the influence of the non-dimensional ratio of damping increases with the increase of the pretension in mooring lines.
文摘This paper introduces AC variable-speed driving control technology application in the continuous annealing line,including the drive system configuration,the driving control characteristics of CAL and the main control functions of the drive system.Firstly introduces the main process of the continuous annealing line,the features of the 6SE70 series common DC bus drive system and the G150 series drive system. Secondly,for the continuous annealing line,there are more strict requirements for the continuity of production and more special requirements for the drive control characteristics.We do a lot of improvement and standardization for the driving control functions and the interfaces of the line automation control system. This paper discusses the communication interface specifications and the dimension transformation methods between the drive and the basic automation system.The detail dimension transformation methods and calculation method about the line speed setting and the actual roller dimension setting are given,and detail description for the calculation method of the reference speed in the drive.Article also emphasized illustrates realizing and testing methods of inertia compensation of equipment in the drives,and standardize the value of line accelerate and decelerate rate,and the inertia test method and inertia compensation coefficient calculation method is introduced in this paper.For the bridge rollers and furnace help rollers load balance control,this paper presents two different load balance control strategies,the load balance control principle for bridge rollers which data communicates from main station to slave stations by Simolink,and the load balance control principle for furnace help rollers which use droop control.The different characteristics of those two methods are stated in detail.
基金supported by the National Natural Science Foundation of China(10872198,50509022)
文摘A slip-line field solution is presented for the ultimate bearing capacity of the pipeline on a purely-cohesive clay soil, taking into account the circular configuration of the pipe, the pipe embedment, and the pipe-soil interfacial cohesion. The derived bearing capacity factors for a smooth rigid pipe limit to those for the conventional rectangular strip footing while the pipe embedment approaches zero. Parametric studies indicate that, the pipe-soil interfacial properties have much influence on the bearing capacity for the pipe foundation on clayedy soils.
文摘Based on the rigid-plastic theory, the finite element method (FEM) equation which incorporates the influence of impact load and volume force is presented. The hammer forging theory for simulation is also given. On the basis of technological analyses, the piston skirt forging processes of LD11 aluminium alloy are simulated under both mechanical pressure forging and hammer forging conditions. By comparison with the metal flow, fibre flow lines, distributions of strain and temperature of the two forging methods, practical forging was carried out and the product quality was controlled. The deformation pattern of the piston skirt forging process was determined by comparing the simulation results with the practical forging results.
文摘This paper gives an insight on the effect of transmission line temperature variations, resulting from loading and weather conditions changes, on a power system＇s steady state and dynamic performance. The impact of dynamic load models on system stability is also studied. The steady-state and dynamic stability simulation results of a 39 bus system for constant line impedance （the traditional simulation practice） are compared to the results with estimated, but realistic, temperature varied line impedances using PSLF （positive sequence load flow） software. The modulated line impedances will affect the thermal loading levels and voltage profiles of buses under steady state response, while the dynamic results will show improved damping in electro-mechanical oscillations at generator buses.
文摘Security constrained multi area multi objective dynamic economic dispatch (SCMAMODED) with renewable energy (RE) and all the possible MTDC stability constraints is formulated for the first time. The stability merits of multi terminal DC (MTDC) tie lines as compared to the traditional HVAC forms the main objective of this paper. Probabilistic load flow (PLF) is applied to determine the system parameters while the uncertainties are modelled using Scenario Based Method (SBM). The simulation results reveal that with the use of MTDC tie lines, the frequency and voltage stability in the MAMODED with renewable energy sources (RES) are enhanced while keeping the MTDC power exchange interface nodes at secure levels.
