期刊文献+
共找到1,224篇文章
< 1 2 62 >
每页显示 20 50 100
Limit point buckling of a finite beam on a nonlinear foundation
1
作者 Romain Lagrange 《Theoretical & Applied Mechanics Letters》 CAS 2014年第3期18-24,共7页
In this paper, we consider an imperfect finite beam lying on a nonlinear foundation, whose dimensionless stiffness is reduced from 1 to k as the beam deflection increases. Periodic equilibrium solutions are found anal... In this paper, we consider an imperfect finite beam lying on a nonlinear foundation, whose dimensionless stiffness is reduced from 1 to k as the beam deflection increases. Periodic equilibrium solutions are found analytically and are in good agreement with a numerical resolution, suggesting that localized buckling does not appear for a finite beam. The equilibrium paths may exhibit a limit point whose existence is related to the imperfection size and the stiffness parameter k through an explicit condition. The limit point decreases with the imperfection size while it increases with the stiffness parameter. We show that the decay/growth rate is sensitive to the restoring force model. The analytical results on the limit load may be of particular interest for engineers in structural mechanics. 展开更多
关键词 BUCKLING IMPERFECTION finite beam nonlinear foundation limit point
在线阅读 下载PDF
STRONG LIMIT POINT FOR LINEAR HAMILTONIAN DIFFERENCE SYSTEM 被引量:1
2
作者 Sun Shurong Han Zhenlai Chen Shaozhu 《Annals of Differential Equations》 2005年第3期407-411,共5页
The definition of strong limit-point for singular Hamiltonian difference expressions with complex coefficients are given, and some strong limit-point criteria are established.
关键词 minimal operator maximal operator limit point strong limitpoint
原文传递
Limit Cycle Containing Nine Critical Points in its Interior for a Class of Cubic Systems
3
作者 Liu Yi-rong Xiao Ping 《Journal of Central South University》 SCIE EI CAS 2000年第2期111-112,共2页
Discuss a class of real planar cubic systems with a critical point O (0,0) of nine orders and obtain the conditions for its limit cycle surrounding the origin, and prove that when small pertubations of coefficients ar... Discuss a class of real planar cubic systems with a critical point O (0,0) of nine orders and obtain the conditions for its limit cycle surrounding the origin, and prove that when small pertubations of coefficients are made, the critical point O (0,0) of nine orders is split into nine real simple critical points and the limit cycle surrounding the origin becomes the limit cycle containing nine critical points in its interior. 展开更多
关键词 CUBIC SYSTEMS critical point of NINE ORDERS limit cycle
在线阅读 下载PDF
ω-Limit Set of a Tree Map
4
作者 曾平凡 莫红 +1 位作者 郭文旌 高文旌 《Northeastern Mathematical Journal》 CSCD 2001年第3期333-339,共7页
Let T be a tree and f be a continuous map from T into itself. We show mainly in this paper that a point x of T is an w-limit point of f if and only if every open neighborhood of x in T contains at least nx + 1 points ... Let T be a tree and f be a continuous map from T into itself. We show mainly in this paper that a point x of T is an w-limit point of f if and only if every open neighborhood of x in T contains at least nx + 1 points of some trajectory, where nx equals the number of connected components of T \ {x}. Then, for any open subset G w(f) in T, there exists a positive integer m = m(G) such that at most m points of any trajectory lie outside G.This result is a generalization of the related result for maps of the interval. 展开更多
关键词 periodic point ω-limit point TREE
在线阅读 下载PDF
The Continuation Power Flow Considering Both Generator Excitation Current Limits and Armature Current Limits 被引量:4
5
作者 ZHAO Jinquan QIAN Tianneng 《中国电机工程学报》 EI CSCD 北大核心 2012年第22期I0016-I0016,10,共1页
在传统连续潮流算法中,发电机无功限制采用定上、下限值来处理,随着有功负荷增加,无功限值通常不变,得到的电压稳定裕度偏大。根据同步发电机的无功出力特性,提出同时计及发电机励磁电流约束和电枢电流约束的连续潮流模型和方法。当相... 在传统连续潮流算法中,发电机无功限制采用定上、下限值来处理,随着有功负荷增加,无功限值通常不变,得到的电压稳定裕度偏大。根据同步发电机的无功出力特性,提出同时计及发电机励磁电流约束和电枢电流约束的连续潮流模型和方法。当相应参数越限时,将发电机节点转换为励磁恒定模型或者电枢电流恒定模型进行计算。所提PV、PEq、PIa节点类型双向转换逻辑可在潮流迭代内进行发电机限制模式的转换,模拟实际系统无功能力的变化。分岔点类型识别模块可以识别崩溃点类型及关键约束。通过新英格兰39节点算例的仿真,证明所提算法是有效的。 展开更多
关键词 发电机励磁 连续潮流 电枢电流 电流限制 功率限制 负荷裕度 稳定评估 CPF
原文传递
Second Descendible Self-Mapping with Closed Periodic Points Set
6
作者 Gengrong Zhang Zhanjiang Ji Fanping Zeng 《Applied Mathematics》 2013年第7期969-971,共3页
Let and f:Xn→Xn be a continuous map. If f is a second descendible map, then P(f) is closed if and only if one of the following hold: 1);2) For any z ε R (f), there exists a yεw (z,f) ∩ P(f) such that every point o... Let and f:Xn→Xn be a continuous map. If f is a second descendible map, then P(f) is closed if and only if one of the following hold: 1);2) For any z ε R (f), there exists a yεw (z,f) ∩ P(f) such that every point of the set orb (y,f) is a isolated point of the set w (z,f);3) For any z ε R(f), the set w (z,f) is finite;4) For any z ε R(f), the set w' (z,f) is finite. The consult give another condition of f with closed periodic set other than [1]. 展开更多
关键词 Periodic point RECURRENT point w-limit point SECOND Descendible Map
在线阅读 下载PDF
CENTER CONDITIONS AND BIFURCATION OF LIMIT CYCLES FOR A CLASS OF FIFTH DEGREE SYSTEMS
7
作者 HuangWentao LiuYirong 《Applied Mathematics(A Journal of Chinese Universities)》 SCIE CSCD 2004年第2期167-177,共11页
The center conditions and bifurcation of limit cycles for a class of fifth degree systems are investigated.Two recursive formulas to compute singular quantities at infinity and at the origin are given.The first nine ... The center conditions and bifurcation of limit cycles for a class of fifth degree systems are investigated.Two recursive formulas to compute singular quantities at infinity and at the origin are given.The first nine singular point quantities at infinity and first seven singular point quantities at the origin for the system are given in order to get center conditions and study bifurcation of limit cycles.Two fifth degree systems are constructed.One allows the appearance of eight limit cycles in the neighborhood of infinity,which is the first example that a polynomial differential system bifurcates eight limit cycles at infinity.The other perturbs six limit cycles at the origin. 展开更多
关键词 fifth degree system focal value singular point quantity center conditions bifurcation of limit cycles.
在线阅读 下载PDF
NON-CONFLICTING ORDERING CONES AND VECTOR OPTIMIZATION IN INDUCTIVE LIMITS
8
作者 丘京辉 《Acta Mathematica Scientia》 SCIE CSCD 2014年第5期1670-1676,共7页
Let (E,ξ)=ind(En,ξn) be an inductive limit of a sequence (En,ξn)n∈N of locally convex spaces and let every step (En,ξn) be endowed with a partial order by a pointed convex (solid) cone Sn. In the framew... Let (E,ξ)=ind(En,ξn) be an inductive limit of a sequence (En,ξn)n∈N of locally convex spaces and let every step (En,ξn) be endowed with a partial order by a pointed convex (solid) cone Sn. In the framework of inductive limits of partially ordered locally convex spaces, the notions of lastingly efficient points, lastingly weakly efficient points and lastingly globally properly efficient points are introduced. For several ordering cones, the notion of non-conflict is introduced. Under the requirement that the sequence (Sn)n∈N of ordering cones is non-conflicting, an existence theorem on lastingly weakly efficient points is presented. From this, an existence theorem on lastingly globally properly efficient points is deduced. 展开更多
关键词 locally convex space inductive limit vector optimization efficient point weakly efficient point
在线阅读 下载PDF
热分析获取锅炉内煤着火特性—Part Ⅰ:比热容、着火温度和着火热 被引量:2
9
作者 刘洋 石泽正 +7 位作者 陈朝帅 苟皓语 陶继业 徐世明 余波 赵培涛 傅培舫 周怀春 《煤炭学报》 北大核心 2025年第2期1303-1314,共12页
现有热分析获取的煤/低温热解焦着火温度值比锅炉内煤着火温度低200~300 K,普遍观点认为热分析仪的升温速率β过低是导致上述结果的主因,但其本质原因应是以往的研究选择的样品反应性过高而导致煤/焦着火提前,同时常用的TG-DTG切线法求... 现有热分析获取的煤/低温热解焦着火温度值比锅炉内煤着火温度低200~300 K,普遍观点认为热分析仪的升温速率β过低是导致上述结果的主因,但其本质原因应是以往的研究选择的样品反应性过高而导致煤/焦着火提前,同时常用的TG-DTG切线法求着火温度不够准确。为解决上述问题,采用非等温TG-DSC获取了2种高温(1400℃)快速热解准东煤焦在不同β下的着火特性包括比热容、着火温度和着火热,考察了β对煤焦着火特性的影响。采用David Merrick模型获取了煤焦的比热容,发现其不受β的影响但与温度的变化相关;用指数函数描述了比热容与温度的关系,得到2种煤焦在0~1600℃的比热容为0.65~1.99 kJ/(kg·K)。采用基于Semenov热爆炸理论的DSC或DTG拐点法和TG-DTG切线法获取了煤焦的着火温度,发现DSC拐点法和DTG拐点法获取的着火温度相当,即两者具有等效性,且始终高于TG-DTG切线法获得的着火温度;着火温度随着β的增加而增加,但增加幅度逐渐减少,可用指数函数描述。将β设置为锅炉中常见的升温速率如105 K/s,可获得煤焦的极限着火温度。采用DSC拐点法和TG-DTG切线法获得的煤焦极限着火温度分别为673~680℃和644~659℃,前者与文献中在携带流反应器(类似锅炉环境)中获得的同类型煤样的着火温度值一致,而后者则会低估着火温度。结合高温热解焦比煤/低温热解焦的反应性低的事实,指出制取反应性合适的高温热解(类似锅炉环境温度)煤焦样品和采用DSC或DTG拐点法获取煤焦的极限着火温度可实现热分析对锅炉内煤着火温度的预测。根据极限着火温度获取了锅炉内2种煤焦的着火热q_(ig)为3414~3669 kJ/kg,并计算了风煤比为0.9~2.5下2种煤焦的理论着火热为1826~2811 kJ/kg。q_(ig)比相应煤焦的理论着火热值大,表明理论着火热可能高估煤在锅炉内的实际着火能力。对热分析获取锅炉内煤着火特性的合理性进行了全方位诠释,所提出的热分析方法论可为获取CFD模拟锅炉内煤着火特性所需的基础数据提供参考。 展开更多
关键词 热分析 DSC拐点法 极限着火温度 着火热 比热容 升温速率 准东煤
在线阅读 下载PDF
大学数学教学内容值得深入研究 被引量:1
10
作者 张景中 《高等数学研究》 2025年第1期29-30,60,共3页
在大学数学课程的学习和教学中,会遇到一些值得深入探讨的问题,还有可能出现数学上的创新.
关键词 点几何 微积分 极限
在线阅读 下载PDF
考虑场地效应的多点地震动作用下边坡永久位移分析
11
作者 宋健 潘驭航 +3 位作者 陆朱汐 姬建 张飞 高玉峰 《岩土工程学报》 EI CAS 北大核心 2025年第1期65-75,共11页
地震动引起的边坡土层非线性动力响应可能导致坡体不同位置的地震动加速度时程不一致,从而对整个滑动体的极限平衡状态及之后的地震累积永久位移产生影响。为了研究场地效应对边坡地震永久位移的影响,基于极限平衡条分法,通过对不同土... 地震动引起的边坡土层非线性动力响应可能导致坡体不同位置的地震动加速度时程不一致,从而对整个滑动体的极限平衡状态及之后的地震累积永久位移产生影响。为了研究场地效应对边坡地震永久位移的影响,基于极限平衡条分法,通过对不同土条赋予不同的水平和竖向地震动时程,推导出一种考虑场地效应的圆弧和任意形状滑面的多点地震作用下边坡永久位移分析方法。通过与有限差分软件FLAC的数值模拟结果进行对比,验证了该方法能够合理考虑地震动的场地效应。通过研究不同分布形式的多点地震动及竖向地震动对边坡永久位移的影响,结果表明:场地效应引起的水平地震动放大以及多点地震动不同分布模式会导致整个滑体平均地震惯性力作用位置发生改变,从而影响地震作用下滑动体沿滑面的永久变形量,竖向地震动对边坡地震位移影响较小。将方法应用于Lexington土石坝震后变形案例分析,计算得到的坝坡地震永久位移与实际震后观测值相吻合,证明了考虑场地效应的重要性及本文方法的合理性。 展开更多
关键词 地震边坡稳定性 场地效应 永久位移 极限平衡条分法 多点地震动
原文传递
逻辑动态系统拓扑结构的多角度分析
12
作者 冯俊娥 赵荣 +2 位作者 孙菁涵 孙凤莉 王菲 《控制与决策》 北大核心 2025年第9期2625-2638,共14页
逻辑动态系统指自变量只取有限个值的动态系统,包括2值的经典逻辑(或布尔逻辑)、k值逻辑、(一般)混合值逻辑,网络拓扑结构是影响网络性能和可靠性的关键因素之一.鉴于此,从多个角度对逻辑动态系统拓扑结构的相关研究做一简要分析与总结... 逻辑动态系统指自变量只取有限个值的动态系统,包括2值的经典逻辑(或布尔逻辑)、k值逻辑、(一般)混合值逻辑,网络拓扑结构是影响网络性能和可靠性的关键因素之一.鉴于此,从多个角度对逻辑动态系统拓扑结构的相关研究做一简要分析与总结.首先,从动态演化的角度概述同步布尔网络、异步布尔网络、随机布尔网络中关于吸引子的研究方法,主要包括模拟方法、BDD技术、分解方法、反馈顶点集方法等;其次,从结构矩阵的角度,总结在代数状态空间表示的框架下,求解吸引子与吸引域的具体算法,体现了矩阵半张量积在求解拓扑结构中的优越性;最后,从图的角度简要总结基于接线图、状态转移图、网络删节、网络划分等求解吸引子的方法. 展开更多
关键词 逻辑动态系统 矩阵半张量积 拓扑结构 不动点 极限环 吸引域
原文传递
PI control based on fuzzy set-point weighting tracking for hydraulic crane boom system
13
作者 Yong YANG An LUO Karl-Erik RYDBERG 《控制理论与应用(英文版)》 EI 2006年第4期327-330,共4页
A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system (HCBS). Two valve-controlled PI controllers, which include a proportion... A PI control strategy based on fuzzy set-point weighting following was proposed for the active damping control of a hydraulic crane boom system (HCBS). Two valve-controlled PI controllers, which include a proportional feedforward controller based on fuzzy set-point weighting following and a limited semi-integrator(LSI), are designed respectively. LSI is used to limit output signal and to prevent wind up at the low frequency of the spectrum. By using a range camera and an electronic feedback control, the tip damping on the HCBS can be adjusted artificially. A collaborative control simulation technique of HOPSAN and MATLAB/SIMULINK is applied to the controller design. Simulation results show that the proposed PI control system has less overshoot as well as faster response. The tip damping on the HCBS during operation is improved. 展开更多
关键词 PI control Fuzzy set-point weighting (FSPW) limited semi-integrator(LSI) Active damping Collaborative control simulation Range camera Hydraulic crane boom system (HCBS)
在线阅读 下载PDF
“操场埋尸案”相关犯罪的追诉时效探讨
14
作者 王登辉 《河南警察学院学报》 2025年第3期80-89,共10页
关于追诉时效终点,“立案时说”“强制措施时说”“起诉时说”“审判时说”“结果时说”“追诉时效期限届满时说”的解释力不及“二分法说”。以追诉时效为主题的案例分析,应当体现分析步骤,突出犯罪之日、立案之日等重要时间节点,不能... 关于追诉时效终点,“立案时说”“强制措施时说”“起诉时说”“审判时说”“结果时说”“追诉时效期限届满时说”的解释力不及“二分法说”。以追诉时效为主题的案例分析,应当体现分析步骤,突出犯罪之日、立案之日等重要时间节点,不能简化为“一人一罪一案”。湖南省新晃侗族自治县的“操场埋尸案”具有综合性和典型性,分析其中杜少平、罗某忠故意杀人罪的追诉时效,杜少平的故意伤害罪、寻衅滋事罪等犯罪的追诉时效,杨甲、黄某、邓某生、刘某波、陈某钿、曹某铨、陈甲、杨某安徇私枉法罪的追诉时效,杨某文、蒋某国玩忽职守罪的追诉时效,杨某辉贪污罪的追诉时效,坚持逻辑一致性,对于厘清追诉时效的适用规则具有重要意义。 展开更多
关键词 追诉时效 追诉时效期限 追诉时效终点 操场埋尸案
原文传递
Crossing Limit Cycles of Planar Piecewise Hamiltonian Systems with Linear Centers Separated by Two Parallel Straight Lines
15
作者 Zhou Jin 《Journal of Applied Mathematics and Physics》 2023年第5期1429-1447,共19页
In this paper, we have studied several classes of planar piecewise Hamiltonian systems with three zones separated by two parallel straight lines. Firstly, we give the maximal number of limit cycles in these classes of... In this paper, we have studied several classes of planar piecewise Hamiltonian systems with three zones separated by two parallel straight lines. Firstly, we give the maximal number of limit cycles in these classes of systems with a center in two zones and without equilibrium points in the other zone (or with a center in one zone and without equilibrium points in the other zones). In addition, we also give examples to illustrate that it can reach the maximal number. 展开更多
关键词 limit Cycles Planar Piecewise Hamiltonian Systems Straight Lines CENTERS Equilibrium points
在线阅读 下载PDF
A New Robust Image Feature Point Detector
16
作者 Junwei Tian Yongxuan Huang +3 位作者 Chengsu Ouyang Yan Zhang Feng Yang Yuan Shu 《通讯和计算机(中英文版)》 2005年第11期1-6,15,共7页
在线阅读 下载PDF
控制机构加载下弹性扁平两杆桁架的稳定计算及参数影响分析
17
作者 韩启浩 曾森 +1 位作者 张永山 李俊如 《计算力学学报》 北大核心 2025年第4期631-637,654,共8页
基于压杆的弹性屈曲及完善体系分支点失稳特征,本文理论推导了控制机构加载下弹性扁平两杆桁架的竖向荷载-竖向位移关系解析计算表达式,给出了实验控制加载策略并绘制了加载全过程的荷载-位移曲线,结合ABAQUS数值分析结果以验证解析表... 基于压杆的弹性屈曲及完善体系分支点失稳特征,本文理论推导了控制机构加载下弹性扁平两杆桁架的竖向荷载-竖向位移关系解析计算表达式,给出了实验控制加载策略并绘制了加载全过程的荷载-位移曲线,结合ABAQUS数值分析结果以验证解析表达式的正确性,最后探究了结构高跨比和杆件柔度对其力学响应的影响。研究结果表明,确立的解析计算表达式可以反映扁平两杆桁架的翻转和超出线弹性范畴的现象及急跳或跳跃失稳现象,最大位移误差和最大荷载误差分别为1.59%和2.59%,解析计算表达式正确。极值点位移只与扁平两杆桁架的几何尺寸有关,而与杆件截面特性无关。随着结构高跨比的增大,极值点位移和极值点荷载增大。随着杆件柔度的增大,极值点荷载降低。研究成果可为桁架结构的稳定计算提供理论依据。 展开更多
关键词 扁平两杆桁架 控制加载 极值点 解析计算 参数分析
在线阅读 下载PDF
极限上限分析的区域光滑径向点插值法
18
作者 陈莘莘 胡英 +1 位作者 张玮 王方鑫 《应用数学和力学》 北大核心 2025年第6期791-799,共9页
基于极限分析的上限定理,建立了用区域光滑径向点插值法进行理想刚塑性结构极限分析的整套求解算法.为了能方便地施加本质边界条件,采用径向点插值法构造机动容许的速度场.通过引入广义梯度光滑技术,将复杂的域内积分转换为简单的光滑... 基于极限分析的上限定理,建立了用区域光滑径向点插值法进行理想刚塑性结构极限分析的整套求解算法.为了能方便地施加本质边界条件,采用径向点插值法构造机动容许的速度场.通过引入广义梯度光滑技术,将复杂的域内积分转换为简单的光滑域边界积分,避免了对形函数的求导.考虑了材料的塑性不可压条件,并针对平面应力和平面应变问题采用不同方式进行处理.将极限上限分析问题归结为满足一系列等式约束的塑性耗散功率最小化问题,从而可采用标准的二阶锥规划对该问题进行求解,这样既提高了求解效率,又提高了求解精度.数值算例结果表明,该文所提方法能对理想刚塑性结构的极限载荷乘子给出令人满意的结果,并且计算结果对网格畸变十分不敏感. 展开更多
关键词 无网格法 区域光滑径向点插值法 极限上限分析 广义梯度光滑技术 二阶锥规划
在线阅读 下载PDF
Resolution of Two Unequally Bright Points of Apodized Optical Systems with Asymmetric Circular Antenna Arrays 被引量:1
19
作者 Andra Naresh Kumar Reddy Pagolu Shailaja Dasari Karuna Sagar 《Optics and Photonics Journal》 2016年第3期39-46,共8页
Sparrow criterion of resolution is used for assessment of the resolution of two object points of apodized optical systems under incoherent illumination of light. Semicircular arrays of circular aperture with discrete ... Sparrow criterion of resolution is used for assessment of the resolution of two object points of apodized optical systems under incoherent illumination of light. Semicircular arrays of circular aperture with discrete asymmetric apodization have suppressed side-lobes and a narrower central peak in the image plane termed as PSF good side on alternatively the right and left of the strong spectral point facilitates to detect the presence of weak spectral point in the vicinity of bright spectral point. The results of investigations on optimum discrete pupil function with semicircular arrays on the intensity distributions in the composite image of two object points with widely varying in their intensities under various degree of coherence of illumination have been studied. Sparrow resolution limits and the dip in central intensity as function of degree of coherence of the illumination (γ), intensity ratio (α), degree of asymmetric apodization (b) and number of discrete elements in semicircular array (n). The efficiency of aperture functions is discussed in terms of these parameters. Pupil function capabilities in redistribution of energy in composite image of two object points in close vicinity have been verified for different considerations. Current study has found an improvement in two-point resolution characteristics compared to their unapodized counter part. Fourier analytical properties of an optical system are presented for evaluation of this practical problem. 展开更多
关键词 Complementary Pupil Function Diffraction Two-point Resolution Discrete Asymmetric Apodization Degree of Coherence Sparrow limit Intensity Ratio SUPERRESOLUTION
在线阅读 下载PDF
上一页 1 2 62 下一页 到第
使用帮助 返回顶部