Background Plant tissue culture has emerged as a tool for improving cotton propagation and genetics,but recalcitrance nature of cotton makes it difficult to develop in vitro regeneration.Cotton’s recalcitrance is inf...Background Plant tissue culture has emerged as a tool for improving cotton propagation and genetics,but recalcitrance nature of cotton makes it difficult to develop in vitro regeneration.Cotton’s recalcitrance is influenced by genotype,explant type,and environmental conditions.To overcome these issues,this study uses different machine learning-based predictive models by employing multiple input factors.Cotyledonary node explants of two commercial cotton cultivars(STN-468 and GSN-12)were isolated from 7–8 days old seedlings,preconditioned with 5,10,and 20 mg·L^(-1) kinetin(KIN)for 10 days.Thereafter,explants were postconditioned on full Murashige and Skoog(MS),1/2MS,1/4MS,and full MS+0.05 mg·L^(-1) KIN,cultured in growth room enlightened with red and blue light-emitting diodes(LED)combination.Statistical analysis(analysis of variance,regression analysis)was employed to assess the impact of different treatments on shoot regeneration,with artificial intelligence(AI)models used for confirming the findings.Results GSN-12 exhibited superior shoot regeneration potential compared with STN-468,with an average of 4.99 shoots per explant versus 3.97.Optimal results were achieved with 5 mg·L^(-1) KIN preconditioning,1/4MS postconditioning,and 80%red LED,with maximum of 7.75 shoot count for GSN-12 under these conditions;while STN-468 reached 6.00 shoots under the conditions of 10 mg·L^(-1) KIN preconditioning,MS with 0.05 mg·L^(-1) KIN(postconditioning)and 75.0%red LED.Rooting was successfully achieved with naphthalene acetic acid and activated charcoal.Additionally,three different powerful AI-based models,namely,extreme gradient boost(XGBoost),random forest(RF),and the artificial neural network-based multilayer perceptron(MLP)regression models validated the findings.Conclusion GSN-12 outperformed STN-468 with optimal results from 5 mg·L^(-1) KIN+1/4MS+80%red LED.Application of machine learning-based prediction models to optimize cotton tissue culture protocols for shoot regeneration is helpful to improve cotton regeneration efficiency.展开更多
Perovskite light emitting diodes(PeLEDs)have attracted considerable research attention because of their external quantum efficiency(EQE)of>20%and have potential scope for further improvement.However,compared to red...Perovskite light emitting diodes(PeLEDs)have attracted considerable research attention because of their external quantum efficiency(EQE)of>20%and have potential scope for further improvement.However,compared to red and green PeLEDs,blue PeLEDs have not been extensively investigated,which limits their commercial applications in the fields of luminance and full-color displays.In this review,blue-PeLED-related research is categorized by the composition of perovskite.The main challenges and corresponding optimization strategies for perovskite films are summarized.Next,the novel strategies for the design of device structures of blue PeLEDs are reviewed from the perspective of transport layers and interfacial layers.Accordingly,future directions for blue PeLEDs are discussed.This review can be a guideline for optimizing perovskite film and device structure of blue PeLEDs,thereby enhancing their development and application scope.展开更多
The reasons for low output power of AlGalnP Light Emitting Diodes （LEDs） have been analysed. LEDs with AlGaInP material have high internal but low external quantum efficiency and much heat generated inside especiall...The reasons for low output power of AlGalnP Light Emitting Diodes （LEDs） have been analysed. LEDs with AlGaInP material have high internal but low external quantum efficiency and much heat generated inside especially at a large injected current which would reduce both the internal and external quantum efficiencies. Two kinds of LEDs with the same active region but different window layers have been fabricated. The new window layer composed of textured 0.5 μm GaP and thin Indium-Tin-Oxide film has shown that low external quantum efficiency （EQE） has serious impaction on the internal quantum efficiency （IQE）, because the carrier distribution will change with the body temperature increasing due to the heat inside, and the test results have shown the evidence of LEDs with lower output power and bigger wavelength red shift.展开更多
A red-emitting phosphor GdNbO4：Eu3＋,Bi3＋ was prepared by a high temperature solid-state reaction technique. The phosphor was characterized by X-ray diffraction （XRD）, particle size analyzer and fluorescence spect...A red-emitting phosphor GdNbO4：Eu3＋,Bi3＋ was prepared by a high temperature solid-state reaction technique. The phosphor was characterized by X-ray diffraction （XRD）, particle size analyzer and fluorescence spectrometer. The single phase of GdNbO4：Eu3＋,Bi3＋ was obtained at 1150~C and the average particle diameter was about 2.30 μm. Excitation and emission spectra reveal that the phosphor can be ef- ficiently excited by ultraviolet （UV） light （394 nm） and emit the strong red light of 612 nm due to the Eu3＋ transition of SD0~TF2. The opti- mum content of Eu3＋ doped in the phosphor GdNbOn：Eu3＋ is 20mo1%. The phosphor Gdo.80NbO4：0.20Eu3＋,0.03Bi3＋ shows much stronger photoluminescence intensity and better chromaticity coordinates （x=0.642, 0.352） than GdNbO4：Eu3＋. It is confirmed that Gdo.80NbO4：0.20Eu3＋,0.03Bi3＋ is a potential candidate for near-UV chip-based white light emitting diodes.展开更多
This paper reviews the recent progress in the synthesis of near-infrared(NIR) lead chalcogenide(PbX;PbX = PbS,PbSe, PbTe) quantum dots(QDs) and their applications in NIR QDs based light emitting diodes(NIR-QLEDs). It ...This paper reviews the recent progress in the synthesis of near-infrared(NIR) lead chalcogenide(PbX;PbX = PbS,PbSe, PbTe) quantum dots(QDs) and their applications in NIR QDs based light emitting diodes(NIR-QLEDs). It summarizes the strategies of how to synthesize high efficiency PbX QDs and how to realize high performance Pb X based NIR-QLEDs.展开更多
lNovel lithium doped tris 8 hydroxylquinoline aluminium(Alq3:Li) layer is deposited between emission layer and electron injection aluminium electrode as an electron injection assistant layer in different organic lig...lNovel lithium doped tris 8 hydroxylquinoline aluminium(Alq3:Li) layer is deposited between emission layer and electron injection aluminium electrode as an electron injection assistant layer in different organic light emitting diodes(OLED) to lower the electron injection barrier. In these devices, Alq3 is used as emission layer, and a bilayer film of N,N bis (1 naphhyl) N,N diphenyl 1,1 biphenyle 4,4' diamine(NPB) and 4,4,4' tris(3 methyl phenylphenylamino) triphenylamine( m MTDATA) used as hole transport layer(HTL). The electroluminescent performance of devices with different thicknesses of Alq3∶Li shows that the insertion of the lithium doped Alq3 layer can reduce the turn on voltage by at least 2 volts, and the stability of devices with this lithium doped Alq3 layer is improved too. It can also change the efficiency of devices. Compared with an ultra thin lithium fluoride(LiF) layer, Alq3∶Li sheet gives similar effects but higher efficiency and can be much thicker and hence it is easier to control the deposition.展开更多
This work applied the ultrasonic bonding to package flip chip GaN-based light emitting diodes （flip chip LEDs） on Si substrates. The effects of ultrasonic bonding parameters on the reliability of flip chip GaN-based...This work applied the ultrasonic bonding to package flip chip GaN-based light emitting diodes （flip chip LEDs） on Si substrates. The effects of ultrasonic bonding parameters on the reliability of flip chip GaN-based LED were investigated. In the sequent aging tests, samples were driven with a constant current of 80 mA for hundreds hours at the room temperature. It was found that the electroluminescence （EL） intensity variation had a large correlation to the ultrasonic power, and then to the bonding temperature and force. A high bonding temperature and ultrasonic power and a proper bonding force improved the EL intensity significantly. It was contributed to a strong atom inter-diffusion forming a stable joint at the bonding interface, The temperature fluctuation in the aging test was the main factor to generate a high inner stress forming delamination at the interface between the chip and Au bump. As a result, delamination had retarded the photons to emit out of the LED packaging and decay its EL intensity.展开更多
Eu2+ -activated reddish-orange-emitting Ca3Si2O7 phosphors were synthesized with the addition of NH4Cl flux.When the phosphors were synthesized in a nominal composition of (Ca0.99Eu0.01)3Si2O7 without flux addition,a ...Eu2+ -activated reddish-orange-emitting Ca3Si2O7 phosphors were synthesized with the addition of NH4Cl flux.When the phosphors were synthesized in a nominal composition of (Ca0.99Eu0.01)3Si2O7 without flux addition,a Ca3Si2O7 phase responsible for reddish-orange emission was identified to coexist with an intermediate phase of a-Ca2SiO4 for green emission.With the addition of NH4Cl flux,a-Ca2SiO4 was suppressed while the pure phase Ca3Si2O7 was obtained as the flux content was 3 wt%.Through varying the amount of flux,the emission color of samples can be tuned from green to reddish-orange,corresponding to the phase transformation from a-Ca2SiO4 to Ca3Si2O7.Through optimizing the doping concentration of Eu2+ ,the optimized photoluminescence (PL) properties for reddish-orange emission can be achieved,which makes this kind of phosphor prospective in the applications of the phosphor-converted white light emitting diodes (PC-WLEDs).展开更多
Organic light emitting diodes employing magnesium doped electron acceptor 3, 4, 9, 10 perylenetetracarboxylic dianhydride （Mg：PTCDA） as electron injection layer and silver as cathode were demonstrated. As compared ...Organic light emitting diodes employing magnesium doped electron acceptor 3, 4, 9, 10 perylenetetracarboxylic dianhydride （Mg：PTCDA） as electron injection layer and silver as cathode were demonstrated. As compared to Mg ： Ag cathode, the combination of the Mg ： PTCDA layer and silver provided enhanced electron injection into tris （8- quinolinolato） aluminium. The device with 1 ： 2 Mg ： PTCDA and Ag showed an increase of about 12% in the maximum current efficiency, mainly due to the improved hole-electron balance, and an increase of about 28% in the maximum power efficiency, as compared to the control device using Mg ： Ag cathode. The properties of Mg ： PTCDA composites were studied as well.展开更多
The halide perovskite blue light emitting diodes(PeLEDs)attracted many researchers because of its fascinating optoelectrical properties.This review introduces the recent progress of blue PeLEDs which focuses on emissi...The halide perovskite blue light emitting diodes(PeLEDs)attracted many researchers because of its fascinating optoelectrical properties.This review introduces the recent progress of blue PeLEDs which focuses on emissive layers and interlayers.The emissive layer covers three types of perovskite structures:perovskite nanocrystals(PeNCs),2-dimensional(2D)and quasi-2D perovskites,and bulk(3D)perovskites.We will discuss about the remaining challenges of blue PeLEDs,such as limited performances,device instability issues,which should be solved for blue PeLEDs to realize next generation displays.展开更多
In this paper, the Sr3Y2 （BO3）4 ：Eu^3＋ phosphor was synthesized by high temperature solid-state reaction method and the luminescence characteristics were investigated. The emission spectrum exhibits one strong red...In this paper, the Sr3Y2 （BO3）4 ：Eu^3＋ phosphor was synthesized by high temperature solid-state reaction method and the luminescence characteristics were investigated. The emission spectrum exhibits one strong red emission at 613 nm corresponding to the electric dipole 5^Do-7^F2 transition of Eu^3＋ under 365 nm excitation, this is because Eu^3＋ substituted for Y^3＋ occupied the non-centrosymmetric position in the crystal structure of Sr3Y2（BO3）4. The excitation spectrum indicates that the phosphor can be effectively excited by ultraviolet （254 nm, 365 nm and 400 nm） and blue （470 nm） light. The effect of Eu^3＋ concentration on the red emission of Sr3Y2（BO3）4 ：Eu^3＋ was measured, the result shows that the emission intensities increase with increasing Eu^3＋ concentration, then decrease. The Commission Internationale del＇Eclairage chromaticity （x, y） of Sr3Y2（BO3）4 ：Eu^3＋ phosphor is （0.640, 0.355） at 15 mol% Eu^3＋.展开更多
Boiling structures on evaporation surface of red copper sheet with a diameter （D） of 10 mm and a wall thickness （h） of 1 mm were processed by the ploughing-extrusion （P-E） processing method, which is one part of...Boiling structures on evaporation surface of red copper sheet with a diameter （D） of 10 mm and a wall thickness （h） of 1 mm were processed by the ploughing-extrusion （P-E） processing method, which is one part of the phase-change heat sink for high power （HP） light emitting diode （LED）. The experimental results show that two different structures of rectangular- and triangular-shaped micro-grooves are formed in P-E process. When P-E depth （ap）, interval of helical grooves （dp） and rotation speed （n） are 0.12 ram, 0.2 mm and 100 r/min, respectively, the boiling structures of triangular-shaped grooves with the fin height of 0.15 mm that has good evaporation performance are obtained. The shapes of the boiling structures are restricted by dp and ap, and dp is determined by n and amount of feed （f）. The ploughing speed has an important influence on the formation of groove structure in P-E process.展开更多
Quantum dots(QDs)have attracted wide attention from academia and industry because of their advantages such as high emitting efficiency,narrow half-peak width,and continuously adjustable emitting wavelength.QDs light e...Quantum dots(QDs)have attracted wide attention from academia and industry because of their advantages such as high emitting efficiency,narrow half-peak width,and continuously adjustable emitting wavelength.QDs light emitting diodes(QLEDs)are expected to become the next generation commercial display technology.This paper reviews the progress of QLED from physical mechanism,materials,to device engineering.The strategies to improve QLED performance from the perspectives of quantum dot materials and device structures are summarized.展开更多
The InGaN/GaN blue light emitting diode（LED） is numerically investigated using a triangular-shaped quantum well model,which involves analysis on its energy band,carrier concentration,overlap of electron and hole wav...The InGaN/GaN blue light emitting diode（LED） is numerically investigated using a triangular-shaped quantum well model,which involves analysis on its energy band,carrier concentration,overlap of electron and hole wave functions,radiative recombination rate,and internal quantum efficiency.The simulation results reveal that the InGaN/GaN blue light emitting diode with triangular quantum wells exhibits a higher radiative recombination rate than the conventional light emitting diode with rectangular quantum wells due to the enhanced overlap of electron and hole wave functions（above 90%） under the polarization field.Consequently,the efficiency droop is only 18% in the light emitting diode with triangular-shaped quantum wells,which is three times lower than that in a conventional LED.展开更多
We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estima...We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.展开更多
The hole injection,the radiative recombination and the device luminescent efficiencies of amorphous silicon carbide thin film p-i-n junction light emitting diodes are quantitatively calculated,and the effect of the ca...The hole injection,the radiative recombination and the device luminescent efficiencies of amorphous silicon carbide thin film p-i-n junction light emitting diodes are quantitatively calculated,and the effect of the carrier(especially the hole) injection and recombination processes on the device luminescent characteristics are revealed.Without considering the device junction temperature,it is found that the device luminescent efficiency mainly depends on the hole injection efficiency at low field and the hole radiative recombination efficiency at high field respectively.The theoretical analyses are in well agreement with the experimental results.展开更多
Highly efficient and stable hybrid white organic light-emitting diodes （HWOLEDs） with a mixed bipolar interlayer between fluorescent blue and phosphorescent yellow emitting layers are demonstrated. The bipolar inter...Highly efficient and stable hybrid white organic light-emitting diodes （HWOLEDs） with a mixed bipolar interlayer between fluorescent blue and phosphorescent yellow emitting layers are demonstrated. The bipolar interlayer is a mixture of p-type diphenyl （l0-phenyl-lOH-spiro [acridine-9,9＇-fluoren]-3Lyl） phosphine oxide and n-type 2＇,2- （1,3,5-benzinetriyl）-tris（1-phenyl-l-H-benzimidazole）. The electroluminance and Commission Internationale de l＇Eclairage （CIE1931） coordinates＇ characteristics can be modulated easily by adjusting the ratio of the hole- predominated material to the electron-predominated material in the interlayer. The hybrid WOLED with a p-type：n-type ratio of 1：3 shows a maximum current efficiency and power efficiency of 61.1 ed/A and 55.8 lm/W, respectively, with warm white CIE coordinates of （0.34, 0.43）. The excellent efficiency and adaptive CIE coordi- nates are attributed to the mixed interlayer with improved charge carrier balance, optimized exciton distribution, and enhanced harvesting of singlet and triplet excitons.展开更多
To form low-resistance Ohmic contact to p-type GaN, InGaN/GaN multiple quantum well light emitting diode wafers are treated with boiled aqua regia prior to Ni/Au （5 nm/5 nm） film deposition. The surface morphology o...To form low-resistance Ohmic contact to p-type GaN, InGaN/GaN multiple quantum well light emitting diode wafers are treated with boiled aqua regia prior to Ni/Au （5 nm/5 nm） film deposition. The surface morphology of wafers and the current voltage characteristics of fabricated light emitting diode devices are investigated. It is shown that surface treatment with boiled aqua regia could effectively remove oxide from the surface of the p-GaN layer, and reveal defect-pits whose density is almost the same as the screw dislocation density estimated by x-ray rocking curve measurement. It suggests that the metal atoms of the Ni/Au transparent electrode of light emitting diode devices may diffuse into the p-GaN layer along threading dislocation lines and form additional leakage current channels. Therefore, the surface treatment time with boiled aqua regia should not be too long so as to avoid the increase of threading dislocation-induced leakage current and the degradation of electrical properties of light emitting diodes.展开更多
We report a type of thin film Al Ga In P red light emitting diode（RLED） on a metallic substrate by electroplating copper（Cu） to eliminate the absorption of Ga As grown substrate.The fabrication of the thin film RL...We report a type of thin film Al Ga In P red light emitting diode（RLED） on a metallic substrate by electroplating copper（Cu） to eliminate the absorption of Ga As grown substrate.The fabrication of the thin film RLED is presented in detail.Almost no degradations of epilayers properties are observed after this substrate transferred process.Photoluminescence and electroluminescence are measured to investigate the luminous characteristics.The thin film RLED shows a significant enhancement of light output power（LOP） by improving the injection efficiency and light extraction efficiency compared with the reference RLED on the Ga As parent substrate.The LOPs are specifically enhanced by 73.5% and 142% at typical injections of 2 A/cm^2 and 35 A/cm^2 respectively from electroluminescence.Moreover,reduced forward voltages,stable peak wavelengths and full widths at half maximum are obtained with the injected current increasing.These characteristic improvements are due to the Cu substrate with great current spreading and the back reflection by bottom electrodes.The substrate transferred technology based on electroplating provides an optional way to prepare high-performance optoelectronic devices,especially for thin film types.展开更多
The degradation mechanism of GaN-based near-ultraviolet(NUV,320-400 nm)light emitting diodes(LEDs)with low-indium content under electrical stress is studied from the aspect of defects.A decrease in the optical power a...The degradation mechanism of GaN-based near-ultraviolet(NUV,320-400 nm)light emitting diodes(LEDs)with low-indium content under electrical stress is studied from the aspect of defects.A decrease in the optical power and an increase in the leakage current are observed after electrical stress.The defect behaviors are characterized using deep level transient spectroscopy(DLTS)measurement under different filling pulse widths.After stress,the concentration of defects with the energy level of 0.47-0.56 eV increases,accompanied by decrease in the concentration of 0.72-0.84 eV defects.Combing the defect energy level with the increased yellow luminescence in photoluminescence spectra,the device degradation can be attributed to the activation of the gallium vacancy and oxygen related complex defect along dislocation,which was previously passivated with hydrogen.This study reveals the evolution process of defects under electrical stress and their spatial location,laying a foundation for manufacture of GaN-based NUV LEDs with high reliability.展开更多
文摘Background Plant tissue culture has emerged as a tool for improving cotton propagation and genetics,but recalcitrance nature of cotton makes it difficult to develop in vitro regeneration.Cotton’s recalcitrance is influenced by genotype,explant type,and environmental conditions.To overcome these issues,this study uses different machine learning-based predictive models by employing multiple input factors.Cotyledonary node explants of two commercial cotton cultivars(STN-468 and GSN-12)were isolated from 7–8 days old seedlings,preconditioned with 5,10,and 20 mg·L^(-1) kinetin(KIN)for 10 days.Thereafter,explants were postconditioned on full Murashige and Skoog(MS),1/2MS,1/4MS,and full MS+0.05 mg·L^(-1) KIN,cultured in growth room enlightened with red and blue light-emitting diodes(LED)combination.Statistical analysis(analysis of variance,regression analysis)was employed to assess the impact of different treatments on shoot regeneration,with artificial intelligence(AI)models used for confirming the findings.Results GSN-12 exhibited superior shoot regeneration potential compared with STN-468,with an average of 4.99 shoots per explant versus 3.97.Optimal results were achieved with 5 mg·L^(-1) KIN preconditioning,1/4MS postconditioning,and 80%red LED,with maximum of 7.75 shoot count for GSN-12 under these conditions;while STN-468 reached 6.00 shoots under the conditions of 10 mg·L^(-1) KIN preconditioning,MS with 0.05 mg·L^(-1) KIN(postconditioning)and 75.0%red LED.Rooting was successfully achieved with naphthalene acetic acid and activated charcoal.Additionally,three different powerful AI-based models,namely,extreme gradient boost(XGBoost),random forest(RF),and the artificial neural network-based multilayer perceptron(MLP)regression models validated the findings.Conclusion GSN-12 outperformed STN-468 with optimal results from 5 mg·L^(-1) KIN+1/4MS+80%red LED.Application of machine learning-based prediction models to optimize cotton tissue culture protocols for shoot regeneration is helpful to improve cotton regeneration efficiency.
基金This work was supported by the National Natural Science Foundation of China(51775199,51735004)Natural Science Foundation of Guangdong Province(2018B030306008)the Fundamental Research Funds for the Central Universities.
文摘Perovskite light emitting diodes(PeLEDs)have attracted considerable research attention because of their external quantum efficiency(EQE)of>20%and have potential scope for further improvement.However,compared to red and green PeLEDs,blue PeLEDs have not been extensively investigated,which limits their commercial applications in the fields of luminance and full-color displays.In this review,blue-PeLED-related research is categorized by the composition of perovskite.The main challenges and corresponding optimization strategies for perovskite films are summarized.Next,the novel strategies for the design of device structures of blue PeLEDs are reviewed from the perspective of transport layers and interfacial layers.Accordingly,future directions for blue PeLEDs are discussed.This review can be a guideline for optimizing perovskite film and device structure of blue PeLEDs,thereby enhancing their development and application scope.
基金Project supported by the National High Technology Research and Development Program of China(Grant No.2006AA03A121)the National Basic Research Program of China(Grant No.2006CB604900)
文摘The reasons for low output power of AlGalnP Light Emitting Diodes （LEDs） have been analysed. LEDs with AlGaInP material have high internal but low external quantum efficiency and much heat generated inside especially at a large injected current which would reduce both the internal and external quantum efficiencies. Two kinds of LEDs with the same active region but different window layers have been fabricated. The new window layer composed of textured 0.5 μm GaP and thin Indium-Tin-Oxide film has shown that low external quantum efficiency （EQE） has serious impaction on the internal quantum efficiency （IQE）, because the carrier distribution will change with the body temperature increasing due to the heat inside, and the test results have shown the evidence of LEDs with lower output power and bigger wavelength red shift.
基金the National"12th Five-year"Science and Technology Support Program of China(No.2011BAE22B03-3)the Project of Chong qing Scientific and Technological Commission(No.CSTC2010AA4048)
文摘A red-emitting phosphor GdNbO4：Eu3＋,Bi3＋ was prepared by a high temperature solid-state reaction technique. The phosphor was characterized by X-ray diffraction （XRD）, particle size analyzer and fluorescence spectrometer. The single phase of GdNbO4：Eu3＋,Bi3＋ was obtained at 1150~C and the average particle diameter was about 2.30 μm. Excitation and emission spectra reveal that the phosphor can be ef- ficiently excited by ultraviolet （UV） light （394 nm） and emit the strong red light of 612 nm due to the Eu3＋ transition of SD0~TF2. The opti- mum content of Eu3＋ doped in the phosphor GdNbOn：Eu3＋ is 20mo1%. The phosphor Gdo.80NbO4：0.20Eu3＋,0.03Bi3＋ shows much stronger photoluminescence intensity and better chromaticity coordinates （x=0.642, 0.352） than GdNbO4：Eu3＋. It is confirmed that Gdo.80NbO4：0.20Eu3＋,0.03Bi3＋ is a potential candidate for near-UV chip-based white light emitting diodes.
基金Project supported by the National Key Research and Development Program,China(Grant Nos.2016YFB0401702 and 2017YFE0120400)the National Natural Science Foundation of China(Grant Nos.61875082 and 61405089)+6 种基金the Guangdong University Key Laboratory for Advanced Quantum Dot Displays and Lighting,China(Grant No.2017KSYS007)the Natural Science Foundation of Guangdong,China(Grant No.2017B030306010)the Guangdong Province’s 2018–2019 Key R&D Program:Environmentally Friendly Quantum Dots Luminescent Materials,China(Grant No.2019B010924001)the Shenzhen Innovation Project,China(Grant Nos.JCYJ20160301113356947 and JSGG20170823160757004)the Shenzhen Peacock Team Project,China(Grant No.KQTD2016030111203005)the Shenzhen Key Laboratory for Advanced Quantum Dot Displays and Lighting,China(Grant No.ZDSYS201707281632549)the Tianjin New Materials Science and Technology Key Project,China(Grant No.16ZXCLGX00040)
文摘This paper reviews the recent progress in the synthesis of near-infrared(NIR) lead chalcogenide(PbX;PbX = PbS,PbSe, PbTe) quantum dots(QDs) and their applications in NIR QDs based light emitting diodes(NIR-QLEDs). It summarizes the strategies of how to synthesize high efficiency PbX QDs and how to realize high performance Pb X based NIR-QLEDs.
文摘lNovel lithium doped tris 8 hydroxylquinoline aluminium(Alq3:Li) layer is deposited between emission layer and electron injection aluminium electrode as an electron injection assistant layer in different organic light emitting diodes(OLED) to lower the electron injection barrier. In these devices, Alq3 is used as emission layer, and a bilayer film of N,N bis (1 naphhyl) N,N diphenyl 1,1 biphenyle 4,4' diamine(NPB) and 4,4,4' tris(3 methyl phenylphenylamino) triphenylamine( m MTDATA) used as hole transport layer(HTL). The electroluminescent performance of devices with different thicknesses of Alq3∶Li shows that the insertion of the lithium doped Alq3 layer can reduce the turn on voltage by at least 2 volts, and the stability of devices with this lithium doped Alq3 layer is improved too. It can also change the efficiency of devices. Compared with an ultra thin lithium fluoride(LiF) layer, Alq3∶Li sheet gives similar effects but higher efficiency and can be much thicker and hence it is easier to control the deposition.
基金supported by the National Natural Science Foundation of China(Grant No.50675130)the National Key Technology Research and Development Program of the Ministry of Science and Technology of China(Grant No.2011BAE01B14)the Program for the New Century Excellent Talents in University(Grant No.NCET-07-0535)
文摘This work applied the ultrasonic bonding to package flip chip GaN-based light emitting diodes （flip chip LEDs） on Si substrates. The effects of ultrasonic bonding parameters on the reliability of flip chip GaN-based LED were investigated. In the sequent aging tests, samples were driven with a constant current of 80 mA for hundreds hours at the room temperature. It was found that the electroluminescence （EL） intensity variation had a large correlation to the ultrasonic power, and then to the bonding temperature and force. A high bonding temperature and ultrasonic power and a proper bonding force improved the EL intensity significantly. It was contributed to a strong atom inter-diffusion forming a stable joint at the bonding interface, The temperature fluctuation in the aging test was the main factor to generate a high inner stress forming delamination at the interface between the chip and Au bump. As a result, delamination had retarded the photons to emit out of the LED packaging and decay its EL intensity.
基金supported by the National Natural Science Foundation of China (Nos.50872091,21076161 and 50802062)the Tianjin Municipal Science/Technology Commission (Nos.10SYSYJC28100 and 2006ZD30)the Tianjin Municipal Higher Education Commission (No.20110304)
文摘Eu2+ -activated reddish-orange-emitting Ca3Si2O7 phosphors were synthesized with the addition of NH4Cl flux.When the phosphors were synthesized in a nominal composition of (Ca0.99Eu0.01)3Si2O7 without flux addition,a Ca3Si2O7 phase responsible for reddish-orange emission was identified to coexist with an intermediate phase of a-Ca2SiO4 for green emission.With the addition of NH4Cl flux,a-Ca2SiO4 was suppressed while the pure phase Ca3Si2O7 was obtained as the flux content was 3 wt%.Through varying the amount of flux,the emission color of samples can be tuned from green to reddish-orange,corresponding to the phase transformation from a-Ca2SiO4 to Ca3Si2O7.Through optimizing the doping concentration of Eu2+ ,the optimized photoluminescence (PL) properties for reddish-orange emission can be achieved,which makes this kind of phosphor prospective in the applications of the phosphor-converted white light emitting diodes (PC-WLEDs).
文摘Organic light emitting diodes employing magnesium doped electron acceptor 3, 4, 9, 10 perylenetetracarboxylic dianhydride （Mg：PTCDA） as electron injection layer and silver as cathode were demonstrated. As compared to Mg ： Ag cathode, the combination of the Mg ： PTCDA layer and silver provided enhanced electron injection into tris （8- quinolinolato） aluminium. The device with 1 ： 2 Mg ： PTCDA and Ag showed an increase of about 12% in the maximum current efficiency, mainly due to the improved hole-electron balance, and an increase of about 28% in the maximum power efficiency, as compared to the control device using Mg ： Ag cathode. The properties of Mg ： PTCDA composites were studied as well.
基金"the Research Project Funded by U-K Brand"(1.210037.01,1.200041.01)of UNIST(Ulsan National Institute of Science&Technology)Nano Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(NRF-2021M3H4A1A02049634).
文摘The halide perovskite blue light emitting diodes(PeLEDs)attracted many researchers because of its fascinating optoelectrical properties.This review introduces the recent progress of blue PeLEDs which focuses on emissive layers and interlayers.The emissive layer covers three types of perovskite structures:perovskite nanocrystals(PeNCs),2-dimensional(2D)and quasi-2D perovskites,and bulk(3D)perovskites.We will discuss about the remaining challenges of blue PeLEDs,such as limited performances,device instability issues,which should be solved for blue PeLEDs to realize next generation displays.
基金supported by Hebei Provincial Technology Development Foundation of China (Grant No 51215103b)Science Foundation of Hebei University, China (Grant No 2006Q06)
文摘In this paper, the Sr3Y2 （BO3）4 ：Eu^3＋ phosphor was synthesized by high temperature solid-state reaction method and the luminescence characteristics were investigated. The emission spectrum exhibits one strong red emission at 613 nm corresponding to the electric dipole 5^Do-7^F2 transition of Eu^3＋ under 365 nm excitation, this is because Eu^3＋ substituted for Y^3＋ occupied the non-centrosymmetric position in the crystal structure of Sr3Y2（BO3）4. The excitation spectrum indicates that the phosphor can be effectively excited by ultraviolet （254 nm, 365 nm and 400 nm） and blue （470 nm） light. The effect of Eu^3＋ concentration on the red emission of Sr3Y2（BO3）4 ：Eu^3＋ was measured, the result shows that the emission intensities increase with increasing Eu^3＋ concentration, then decrease. The Commission Internationale del＇Eclairage chromaticity （x, y） of Sr3Y2（BO3）4 ：Eu^3＋ phosphor is （0.640, 0.355） at 15 mol% Eu^3＋.
基金Projects(50436010, 50675070) supported by the National Natural Science Foundation of China Project(07118064) supported by the Natural Science Foundation of Guangdong Province, China+1 种基金 Project(U0834002) supported by the Joint Fund of NSFC-Guangdong of ChinaProjects(SY200806300289A, JSA200903190981A) supported by Shenzhen Scientific Program, China
文摘Boiling structures on evaporation surface of red copper sheet with a diameter （D） of 10 mm and a wall thickness （h） of 1 mm were processed by the ploughing-extrusion （P-E） processing method, which is one part of the phase-change heat sink for high power （HP） light emitting diode （LED）. The experimental results show that two different structures of rectangular- and triangular-shaped micro-grooves are formed in P-E process. When P-E depth （ap）, interval of helical grooves （dp） and rotation speed （n） are 0.12 ram, 0.2 mm and 100 r/min, respectively, the boiling structures of triangular-shaped grooves with the fin height of 0.15 mm that has good evaporation performance are obtained. The shapes of the boiling structures are restricted by dp and ap, and dp is determined by n and amount of feed （f）. The ploughing speed has an important influence on the formation of groove structure in P-E process.
基金Project supported by Leading innovation and entrepreneurship team of Zhejiang Province of China (Grant No.2021R01003)Science and Technology Innovation 2025 Major Project of Ningbo (Grant No.2022Z085)+2 种基金Ningbo 3315 Programme (Grant No.2020A-01-B)YONGJIANG Talent Introduction Programme (Grant No.2021A-038-B)Zhujiang Talent Programme (Grant No.2016LJ06C621)。
文摘Quantum dots(QDs)have attracted wide attention from academia and industry because of their advantages such as high emitting efficiency,narrow half-peak width,and continuously adjustable emitting wavelength.QDs light emitting diodes(QLEDs)are expected to become the next generation commercial display technology.This paper reviews the progress of QLED from physical mechanism,materials,to device engineering.The strategies to improve QLED performance from the perspectives of quantum dot materials and device structures are summarized.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61076013,51102003,and 60990313)the National Basic Research Program of China (Grant No. 2012CB619304)the Specialized Research Fund for the Doctoral Program of Higher Education,China (Grant No. 20100001120014)
文摘The InGaN/GaN blue light emitting diode（LED） is numerically investigated using a triangular-shaped quantum well model,which involves analysis on its energy band,carrier concentration,overlap of electron and hole wave functions,radiative recombination rate,and internal quantum efficiency.The simulation results reveal that the InGaN/GaN blue light emitting diode with triangular quantum wells exhibits a higher radiative recombination rate than the conventional light emitting diode with rectangular quantum wells due to the enhanced overlap of electron and hole wave functions（above 90%） under the polarization field.Consequently,the efficiency droop is only 18% in the light emitting diode with triangular-shaped quantum wells,which is three times lower than that in a conventional LED.
基金Supported by the National Natural Science Foundation of China under Grant No 11304247the Shaanxi Provincial Research Plan for Young Scientific and Technological New Stars(No 2015KJXX-40)the Youth Foundation of Xi’an University of Post&Telecommunication under Grant Nos 1011215 and 1010473
文摘We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.
文摘The hole injection,the radiative recombination and the device luminescent efficiencies of amorphous silicon carbide thin film p-i-n junction light emitting diodes are quantitatively calculated,and the effect of the carrier(especially the hole) injection and recombination processes on the device luminescent characteristics are revealed.Without considering the device junction temperature,it is found that the device luminescent efficiency mainly depends on the hole injection efficiency at low field and the hole radiative recombination efficiency at high field respectively.The theoretical analyses are in well agreement with the experimental results.
基金Supported by the National Natural Science Foundation of China under Grant No 91441201
文摘Highly efficient and stable hybrid white organic light-emitting diodes （HWOLEDs） with a mixed bipolar interlayer between fluorescent blue and phosphorescent yellow emitting layers are demonstrated. The bipolar interlayer is a mixture of p-type diphenyl （l0-phenyl-lOH-spiro [acridine-9,9＇-fluoren]-3Lyl） phosphine oxide and n-type 2＇,2- （1,3,5-benzinetriyl）-tris（1-phenyl-l-H-benzimidazole）. The electroluminance and Commission Internationale de l＇Eclairage （CIE1931） coordinates＇ characteristics can be modulated easily by adjusting the ratio of the hole- predominated material to the electron-predominated material in the interlayer. The hybrid WOLED with a p-type：n-type ratio of 1：3 shows a maximum current efficiency and power efficiency of 61.1 ed/A and 55.8 lm/W, respectively, with warm white CIE coordinates of （0.34, 0.43）. The excellent efficiency and adaptive CIE coordi- nates are attributed to the mixed interlayer with improved charge carrier balance, optimized exciton distribution, and enhanced harvesting of singlet and triplet excitons.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60776047, 60836003, 60476021 and 60576003)
文摘To form low-resistance Ohmic contact to p-type GaN, InGaN/GaN multiple quantum well light emitting diode wafers are treated with boiled aqua regia prior to Ni/Au （5 nm/5 nm） film deposition. The surface morphology of wafers and the current voltage characteristics of fabricated light emitting diode devices are investigated. It is shown that surface treatment with boiled aqua regia could effectively remove oxide from the surface of the p-GaN layer, and reveal defect-pits whose density is almost the same as the screw dislocation density estimated by x-ray rocking curve measurement. It suggests that the metal atoms of the Ni/Au transparent electrode of light emitting diode devices may diffuse into the p-GaN layer along threading dislocation lines and form additional leakage current channels. Therefore, the surface treatment time with boiled aqua regia should not be too long so as to avoid the increase of threading dislocation-induced leakage current and the degradation of electrical properties of light emitting diodes.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2016YFB0400600 and 2016YFB0400603)the National Natural Science Foundation of China(Grant Nos.11574362,61210014,and 11374340)
文摘We report a type of thin film Al Ga In P red light emitting diode（RLED） on a metallic substrate by electroplating copper（Cu） to eliminate the absorption of Ga As grown substrate.The fabrication of the thin film RLED is presented in detail.Almost no degradations of epilayers properties are observed after this substrate transferred process.Photoluminescence and electroluminescence are measured to investigate the luminous characteristics.The thin film RLED shows a significant enhancement of light output power（LOP） by improving the injection efficiency and light extraction efficiency compared with the reference RLED on the Ga As parent substrate.The LOPs are specifically enhanced by 73.5% and 142% at typical injections of 2 A/cm^2 and 35 A/cm^2 respectively from electroluminescence.Moreover,reduced forward voltages,stable peak wavelengths and full widths at half maximum are obtained with the injected current increasing.These characteristic improvements are due to the Cu substrate with great current spreading and the back reflection by bottom electrodes.The substrate transferred technology based on electroplating provides an optional way to prepare high-performance optoelectronic devices,especially for thin film types.
基金supported by the National Natural Science Foundation of China(Grant Nos.62104180,61974115,11690042,61634005,61974111,12035019,and 61904142)the Fundamental Research Funds for the Central Universities(Grant No.XJS221106)the Key Research and Development Program of Shaanxi,China(Grant No.2020ZDLGY03-05)。
文摘The degradation mechanism of GaN-based near-ultraviolet(NUV,320-400 nm)light emitting diodes(LEDs)with low-indium content under electrical stress is studied from the aspect of defects.A decrease in the optical power and an increase in the leakage current are observed after electrical stress.The defect behaviors are characterized using deep level transient spectroscopy(DLTS)measurement under different filling pulse widths.After stress,the concentration of defects with the energy level of 0.47-0.56 eV increases,accompanied by decrease in the concentration of 0.72-0.84 eV defects.Combing the defect energy level with the increased yellow luminescence in photoluminescence spectra,the device degradation can be attributed to the activation of the gallium vacancy and oxygen related complex defect along dislocation,which was previously passivated with hydrogen.This study reveals the evolution process of defects under electrical stress and their spatial location,laying a foundation for manufacture of GaN-based NUV LEDs with high reliability.
