Z-parameter method based on the Larson-Miller relationship is proposed to assess remaining life of a 1Cr5Mo steel. The non-linear master curve of stress a vs. Larson-Miller parameter P of the steel can be expressed as...Z-parameter method based on the Larson-Miller relationship is proposed to assess remaining life of a 1Cr5Mo steel. The non-linear master curve of stress a vs. Larson-Miller parameter P of the steel can be expressed as: P=29.608-5. 085logσ. A family of curves parallel to the master curve can be expressed as: P=29.608-Z-5.085logσ, where the value of Z represents the magnitude deviated from the master curve. A relationship between the value of Z-parameter and the level of spheroidization E (mi-crostructural degradation) can be expressed as: Z=0.203(E-1).展开更多
Compared with traditional energy sources,wind power has a lower environmental impact.However,emissions are still generated across the life cycle of wind turbines,from production to recycling.As wind power rapidly deve...Compared with traditional energy sources,wind power has a lower environmental impact.However,emissions are still generated across the life cycle of wind turbines,from production to recycling.As wind power rapidly develops and deployment increases,these impacts are becoming increasingly evident.A comprehensive understanding of these impacts is crucial for sustainable development.Based on the harmonization of previous detailed life cycle assessment(LCA)studies,this study develops a simplified LCA model that estimates the life cycle environmental impacts of wind turbines based on their nominal power.Using this simplified LCA model,we assess the global warming potential(GWP),acidification potential(AP),and cumulative energy demand(CED)of wind power at the regional scale for 2022 and under three future scenarios(high-power wind turbine promotion,reduced wind curtailment,and a comprehensive development scenario).The results indicate that in 2022,the life cycle GWP,AP,and CED of wind power in western China were 10.76 g CO_(2) eq/kWh,0.177 g SO_(2) eq/kWh,and 17.6 kJ/kWh,respectively.Scenario simulations suggest that reducing wind curtailment is the most effective approach for reducing emissions in Inner Mongolia,Gansu,Qinghai,Ningxia,and Xinjiang,producing average decreases of 8.64%in GWP,8.39%in AP,and 9.26%in CED.In contrast,for Guangxi,Chongqing,Sichuan,Guizhou,Yunnan,Xizang,and Shaanxi,the promotion of high-power wind turbines provides greater environmental benefits than reducing curtailment,producing average decreases of 3.45%,3.09%,and 4.29%in GWP,AP,and CED,respectively.These findings help clarify the environmental impact of wind power across its life cycle at the regional scale and provide theoretical references for the direction of future wind power development and the formulation of related policies.展开更多
Using solid waste as a substitute for conventional cement has become an important way to reduce carbon emissions.This paper attempted to utilize steel slag(SS)and fly ash(FA)as supplementary cementitious material by u...Using solid waste as a substitute for conventional cement has become an important way to reduce carbon emissions.This paper attempted to utilize steel slag(SS)and fly ash(FA)as supplementary cementitious material by utilizing CO_(2)mineralization curing technology.This study examined the dominant and interactive influences of the residual water/cement ratio,CO_(2)pressure,curing time,and SS content on the mechanical properties and CO_(2)uptake rate of CO_(2)mineralization curing SS-FA-Portland cement ternary paste specimens.Additionally,microstructural development was analyzed.The findings demonstrated that each factor significantly affected compressive strength and CO_(2)uptake rate,with factor interactions becoming more pronounced at higher SS dosages(>30%),lower residual water/cement ratios(0.1-0.15),and CO_(2)pressures of 0.1-0.3 MPa.Microscopic examinations revealed that mineralization primarily yielded CaCO_(3)and silica gel.The residual w/c ratio and SS content significantly influenced the CaCO_(3)content and crystallinity of the mineralization products.Post-mineralization curing,the percentage of pores larger than 50 nm significantly decreased,the proportion of harmless pores smaller than 20 nm increased,and pore structure improved.This study also found that using CO_(2)mineralization curing SS-FA-Portland cement solid waste concrete can significantly reduce the negative impact on the environment.展开更多
With the increasingly serious environmental problems,the use of sustainable materials is particularly important.This study focuses on the greenhouse gas emissions and economic costs of wood over its life cycle as a su...With the increasingly serious environmental problems,the use of sustainable materials is particularly important.This study focuses on the greenhouse gas emissions and economic costs of wood over its life cycle as a sustainable resource.We use a systematic life cycle assessment(LCA)approach to assess the entire process from raw material collection,processing,use to disposal.The study found that using wood can significantly reduce greenhouse gas emissions compared to traditional building materials such as steel and concrete.In addition,although the initial procurement costs of wood may be higher,its maintenance costs are lower in the long run,making the life cycle costs generally more economical.The results of this study highlight the environmental and economic advantages of wood in the selection of sustainable building materials,and provide a scientific basis for promoting the use of wood.展开更多
The NdFeB scrap,as a representative solid waste of rare earths,possesses significant recyclable value.This study focused on NdFeB waste and investigated the environmental impacts of pyro-and hydro-metallurgical proces...The NdFeB scrap,as a representative solid waste of rare earths,possesses significant recyclable value.This study focused on NdFeB waste and investigated the environmental impacts of pyro-and hydro-metallurgical process(PH-M process)and its improved version,the pyro-and hydro-metallurgical improvement process(PH-Mi process).The results demonstrate that,although the PH-Mi process consumes higher amounts of energy,electricity,and chemicals compared to the PH-M process,it is more environmentally friendly and economically efficient(i.e.,net profit increased by 34.12%).To quantify and compare the environmental performance of the two scenarios,life cycle assessment methodology was applied.It is concluded that the PH-Mi process is superior to the PH-M process for eutrophication potential(EP)and the total environmental impacts.In comparison with PH-Mi process,PH-M process exhibits a certain advantage in terms of carbon footprint due to increased consumption of electricity and chemicals after the technological upgrade.展开更多
The purpose of this paper is to identify the processes with the highest contribution to potential environmental impacts in the life cycle of the masonry of concrete blocks by evaluating their main emissions contributi...The purpose of this paper is to identify the processes with the highest contribution to potential environmental impacts in the life cycle of the masonry of concrete blocks by evaluating their main emissions contributing to impact categories and identifying hotspots for environmental improvements.The research is based on the Life Cycle Assessment(LCA)study of non-load-bearing masonry of concrete blocks performed by the authors.The processes those have demonstrated higher contribution to environmental impacts were identified in the Life Cycle Impact Assessment(LCIA)phase and a detailed analysis was carried out on the main substances derived from these processes.The highest potential impacts in the life cycle of the concrete blocks masonry can be attributed mainly to emissions coming from the production of Portland cement,which explains the peak of impact potential on the blocks production stage,but also the significant impact potential in the use of the blocks for masonry construction,due to the use of cement mortar.The results of this LCA study are part of a major research on the comparative analysis of different typologies of non-load-bearing external walls,which aims to contribute to the creation of a life cycle database of major building systems,to be used by the environmental certification systems of buildings.展开更多
The total replacement of old fossil fuels poses obstacles,making the production of efficient biogasoline vital.Despite its potential as an environmentally friendly fossil fuel substitute,the life cycle assessment(LCA)...The total replacement of old fossil fuels poses obstacles,making the production of efficient biogasoline vital.Despite its potential as an environmentally friendly fossil fuel substitute,the life cycle assessment(LCA)of palm oil-derived biogasoline remains underexplored.This study investigated the production of biogasoline fromcrude palm oil(CPO)based biorefinery using catalytic cracking over mesoporousγ-Al_(2)O_(3) catalyst and LCA analysis.High selectivity of converting CPO into biogasoline was achieved by optimizing catalytic cracking parameters,including catalyst dose,temperature,and contact time.γ-Al_(2)O_(3) and CPO were characterized by several methods to study the physical and chemical properties.The physical properties of biogasoline,such as density,calorific value,viscosity,and flash point,were investigated.An overall yield of 60.11%was achieved after catalytic cracking produced several C5-C11 short-chain hydrocarbons.Additionally,this research proposes innovative emission reduction strategies,including waste-to-biogasoline conversion and the use of biodegradable feedstocks that enhance the sustainability of biogasoline production.LCA ofγ-Al_(2)O_(3)’s energy and environmental implications reveals minor effects on global warming(0.0068%)and freshwater ecotoxicity(0.187%).LCAs show a 0.085%impact in the energy sector.This focus on both ecological impacts and practical mitigation strategies deepens the understanding of biogasoline production.展开更多
Membrane gas absorption and solar-assisted absorbent regeneration offer a sustainable approach to reduce the energy penalty of post-combustion CO_(2) capture.This study introduces a novel system integrating solar ther...Membrane gas absorption and solar-assisted absorbent regeneration offer a sustainable approach to reduce the energy penalty of post-combustion CO_(2) capture.This study introduces a novel system integrating solar thermal energy with membrane gas absorption to capture CO_(2) from a 580 MWe pulverized coal power plant.The environmental impacts across six scenarios at varying solar fractions are evaluated via life cycle assessment.Results show a 7.61%–13.04%reduction in global warming potential compared to a steam-driven CO_(2) capture system.Electricity and steam consumption dominate the operational phase,contributing 15%–64%and 18%–61%to environmental impacts in non-TES scenarios,respectively.While TES reduces most impacts,it increases stratospheric ozone depletion and marine eutrophication due to nitrate-based phase change materials and monoethanolamine.Higher solar fractions lower impacts in non-TES scenarios but elevate specific impacts in TES scenarios,highlighting trade-offs for sustainable CO_(2) capture deployment.展开更多
Packaging materials are indispensable in modern industries but also significantly contribute to environmental degradation,resource consumption,and waste generation.This systematic review critically assesses the integr...Packaging materials are indispensable in modern industries but also significantly contribute to environmental degradation,resource consumption,and waste generation.This systematic review critically assesses the integration of artificial intelligence(AI),life cycle sustainability assessment(LCSA)following ISO 14040 standards,and circularity mapping to overcome sustainability barriers in packaging.The study identifies environmental,economic,and social hotspots across the life cycle stages of packaging materials by examining real-worldcase studies such as Coca-Cola’s adoption of recycled PET bottles andUnilever’s commitment to 100% recyclable plastic.AI technologies highlight transformative tools for optimising resource allocation,enhancing waste management,and supporting predictive maintenance in packaging systems.To maximise their impact,circular economy(CE)strategies,including material substitution,reusable packaging,and recycling,are discussed with AI-driven approaches.Policy frameworks like mandatory life cycle reporting and AI-focused capacity-building initiatives drive systemic change.The packaging industry achieves significant sustainability improvements by combining LCSA,CE principles,and AI while fostering economic benefits and social equity.This paper provides a comprehensive foundation for future research and practical applications to transform the packaging sector into a more sustainable and circular system.This review is the first to integrate LCSA,circular economy mapping,and AI applications in sustainable packaging.It highlights practical strategies and identifies research gaps to guide academia,industry,and policymakers toward scalable and intelligent sustainability solutions.Moreover,the review bridges methodological rigour with practical implementation by aligning digital intelligence with material sustainability frameworks,thus forming a multidisciplinary blueprint for a circular future in packaging.展开更多
This study compares the environmental sustainability of five alternatives for the remediation of marine sediments of one of the most polluted coastal sites in Europe(Bagnoli-Coroglio bay,Mediterranean Sea),using the L...This study compares the environmental sustainability of five alternatives for the remediation of marine sediments of one of the most polluted coastal sites in Europe(Bagnoli-Coroglio bay,Mediterranean Sea),using the Life Cycle Assessment(LCA)methodology.The treatments are either in-situ or exsitu,the latter requiring an initial dredging to transport the contaminated sediments to the management site.More in detail,four ex-situ remediation technologies based on landfilling,bioremediation,electrokinetic technique and soil washing were identified.These technologies are compared to an in-situ strategy currently under validation for enhancing bioremediation of the polluted sediments of the Bagnoli-Coroglio site.Our results indicate that the disposal in landfilling site is the worst option in most categories(e.g.,650 kg CO_(2) eq./t of treated sediment,considering the nearest landfilling site),followed by the bioremediation,mainly due to the high energy demand.Electrokinetic remediation,soil washing,and innovative in-situ technology represent the most sustainable options.In particular,the new in-situ technology appears to be the least impacting in all categories(e.g.,54 kg CO_(2) eq./t of treated sediment),although it is expected to require longer treatment time(estimated up to 12 months based on its potential efficiency).It can reduce the impact on climate change more than 12 times compared to the disposal and 7 times compared to bioremediation in addition to the possibility to avoid/reduce the dredging operations and the consequent dispersion of pollutants.The results open relevant perspectives towards more eco-sustainable and costly effective actions for the reclamation of contaminated marine sediments.展开更多
Improved life assessment techniques will enable engineering components to be replaced before failure, thereby reducing the risk of industrial accidents as well as minimizing financial loss due to unscheduled outages. ...Improved life assessment techniques will enable engineering components to be replaced before failure, thereby reducing the risk of industrial accidents as well as minimizing financial loss due to unscheduled outages. For components operating at high temperatures, temperature measurement is very important. In many situations, the environmental conditions are too hostile for conventional techniques to be used. Researchers over the world have been looking for new techniques for temperature measurement and one such device, called Feroplug, has been developed previously by the and coworkers. The Feroplug has been patented in USA, UK and Europe by the British Technology Group. The underlying principle of the Feroplug is based on the transformation of ferrite in some specially designed duplex stainless steels. This paper describes a new invention called Sigmaplug which is a new development of the Feroplug but using an entirely different physical principle. It was discovered that the sigma phase in Fe展开更多
Statistical manipulation of material data was conducted for probabilistic life assessment or risk-based design and maintenance for high temperature components of power plants. To obtain the statistical distribution of...Statistical manipulation of material data was conducted for probabilistic life assessment or risk-based design and maintenance for high temperature components of power plants. To obtain the statistical distribution of material properties, dominant parameters affecting material properties are introduced into normalization of statistical variables. Those parameters are hardness, chemical composition, characteristic micro structural features and so on. Creep and fatigue properties are expressed by normalized parameters and the unified statistical distributions are obtained. These probability distribution functions show good coincidence statistically with the field database of steam turbine components. It was concluded that the unified statistical baseline approach is useful for the risk management of components in power plants.展开更多
The creep life of an aeroengine recuperator is investigated in terms of continuum damage mechanics by using finite element simulations.The effects of the manifold wall thickness and creep properties of brazing filler ...The creep life of an aeroengine recuperator is investigated in terms of continuum damage mechanics by using finite element simulations.The effects of the manifold wall thickness and creep properties of brazing filler metal on the operating life of the recuperator are analyzed.Results show that the crack initiates from the brazing filler metal located on the outer surface of the manifold with the wall thickness of 2 mm and propagates throughout the whole region of the brazing filler metal when the creep time reaches 34900 h.The creep life of the recuperator meets the requirement of 40000 h continuous operation when the wall thickness increases to 3.5 mm,but its total weight increases by 15%.Decreasing the minimum creep strain rate with the enhancement of the creep strength of the brazing filler metal presents an obvious effect on the creep life of the recuperator.At the same stress level,the creep rupture time of the recuperator is enhanced by 13 times if the mismatch between the minimum creep rate of the filler and base metal is reduced by 20%.展开更多
High-performing wearability and corrosion resistance are required for an exposed aluminum alloy bridge deck,but existing experimental research remains limited.In this paper,feasible test methods are proposed based on ...High-performing wearability and corrosion resistance are required for an exposed aluminum alloy bridge deck,but existing experimental research remains limited.In this paper,feasible test methods are proposed based on an experimental study on the wearability and corrosion resistance of the aluminum alloy bridge deck of the Bengbu Bridge in Tianjin,China.The line friction test of standard specimens was adopted,and the aluminum alloy bridge deck＇s wearability was calculated.The electrochemical test was conducted to measure the corrosion rate and morphology characteristics of specimens that were corroded in various solutions that simulated the atmospheric environment.The test results show that the wearability and corrosion resistance of the aluminum alloy bridge deck are sufficient and met the project＇s requirements.The test methods proposed have practical significance for future engineering research,and the test results are useful for other engineering applications of aluminum alloys.展开更多
Assessing and accounting for material consumption and environmental impact are necessary to measure environmental externalities of the aluminum industry and to construct an ecological civilization.In this research,lif...Assessing and accounting for material consumption and environmental impact are necessary to measure environmental externalities of the aluminum industry and to construct an ecological civilization.In this research,life cycle assessment(LCA)theory was used to assess the environmental impact of primary aluminum based on the lime soda Bayer process and different power generation modes,and the sources and distributions of the four selected impact categories were analyzed.The results show that,(1)Negative environmental impact of aluminum industry generally occurs from alumina extraction,carbon anode fabrication and electrolysis,particularly electrolysis and alumina extraction.Primary energy demand(PED),water use(WU),global warming potential(GWP)and freshwater eutrophication potential(FEP)are main environmental impact categories.(2)The environmental load with thermal power is higher than that with hydropower,e.g.,for the former,the greenhouse gas emission coefficient of 21800 kg CO2 eq/t(Al)will be generated,while for the latter,4910 kg CO2 eq/t(Al)will be generated.(3)Both power mode methods reflect the energy structure,whereas direct emissions reflect the technical level,indicating the potential for large energy savings and emission reductions,and some policies,related to clean power,energy efficiency and technological progress,should be made for emission reduction.展开更多
In 2008,around 596 000 t of aluminum dross was generated from secondary aluminum industry in China;however,it was not sufficiently recycled yet.Approximately 95% of the Al dross was land filled without innocent treatm...In 2008,around 596 000 t of aluminum dross was generated from secondary aluminum industry in China;however,it was not sufficiently recycled yet.Approximately 95% of the Al dross was land filled without innocent treatment.The purpose of this work is to investigate Al dross recycling by environmentally efficient and friendly methods.Two methods of Al dross recycling which could utilize Al dross efficiently were presented.High-quality aluminum-silicon alloys and brown fused alumina(BFA) were produced successfully by recycling Al dross.Then,life cycle assessment(LCA) was performed to evaluate environmental impact of two methods of Al dross recycling process.The results show that the two methods are reasonable and the average recovery rate of Al dross is up to 98%.As the LCA results indicate,they have some advantages such as less natural resource consumption and pollutant emissions,which efficiently relieves the burden on the environment in electrolytic aluminum and secondary aluminum industry.展开更多
The internal recycling process of BOF slag which is one of the huge solid wastes from iron and steel indus try was emphasized. Based on the four scenarios of different internal recycling strategies for BOF slag, life ...The internal recycling process of BOF slag which is one of the huge solid wastes from iron and steel indus try was emphasized. Based on the four scenarios of different internal recycling strategies for BOF slag, life cycle assessment （LCA） as a valuable tool for industrial solid waste management was applied to analyze the contribution to reducing environmental impacts and resources burdens for each scenario. The global warming potential （GWP） re- sults of the four scenarios show that the scenario which performs best in carbon reduction cuts off 14.2G of GWP impacts of the worst scenario. The results of this study show that the optimized internal recycling process of BOF slag can improve the environmental performance of crude steel. It is important to assess and choose an appropriate strategy to recycle BOF slag from LCA perspective to reduce the environmental impacts and resource burdens as much as possible.展开更多
Pneumatic actuators and electric actuators have almost been applied to all manufacturing industries. The two kinds of actuators can replace each other in most fields, such as the point to point transmission occasion a...Pneumatic actuators and electric actuators have almost been applied to all manufacturing industries. The two kinds of actuators can replace each other in most fields, such as the point to point transmission occasion and some rotating occasions. However, there are very few research results about the advantages and disadvantages of two kinds of actuators under the same working conditions so far. In this paper, a novel comprehensive assessment method, named as overall life cycle comprehensive assessment （OLCCA）, is proposed for comparison and assessment of pneumatic and electric actuators. OLCCA contains mechanical properties evaluation （MPE）, life cycle cost analysis based on users （LCCABOU） and life cycle environmental impact analysis （LCEIA） algorithm in order to solve three difficult problems： mechanical properties assessment, cost analysis and environmental impact assessment about actuators. The mechanical properties evaluation of actuators is a multi-objective optimization problem. The fuzzy data quantification and information entropy methods are combined to establish MPE algorithm of actuators. Two kinds of pneumatic actuators and electric actuators with similar bearing capacity and similar work stroke were taken for example to verify the correctness of MPE algorithm. The case study of MPE algorithm for actuators verified its correctness. LCCABOU for actuators is also set up. Considering cost complex structure of pneumatic actuators, public device cost even method （PDCEM） is firstly presented to solve cost division of public devices such as compressors, aftercooler, receivers, etc. LCCABOU method is also effective and verified by the three groups of pneumatic actuators and electric actuators. Finally, LCEIA model of actuators is established for the environmental impact assessment of actuators. LCEIA data collection method and model establishment procedure for actuators are also put forward. With Simapro 7, LCEIA comparison results of six actuators can be obtained： Fossil fuels are the major environmental factor of pneumatic and electric actuators; Environmental impact of electric actuator is large than one of pneumatic actuator under the similar mechanical properties and working conditions of pneumatic and electric actuators. The results are correct and correspond with the actual mechanical properties of actuators. This paper proposes a comprehensive evaluation method of the actuators, which can solve the critical problem that similar electromechanical products are very difficult to be compared with each other from the angle of performance, cost and environment impact.展开更多
Lift cycle assessment(LCA)methodology was applied to evaluating and comparing two waste acid disposal processes in zinc smelting.The results indicate that environmental impacts of gas−liquid vulcanization technologies...Lift cycle assessment(LCA)methodology was applied to evaluating and comparing two waste acid disposal processes in zinc smelting.The results indicate that environmental impacts of gas−liquid vulcanization technologies are human toxicity,abiotic depletion potential,and global warming risk,which are mainly caused in neutralizing−evaporating−crystallization unit and electrodialysis unit.As for traditional lime neutralization method,vulcanization unit is the main factor.In this regard,the total environmental impact of traditional lime neutralization method is much higher than that of gas−liquid vulcanization technologies.Furthermore,the sensitive analysis shows that electricity and sodium sulfide(60%)are sensitive factors in two waste acid disposal technologies.In addition,the total cost of disposing a functional unit waste acid in traditional lime neutralization process is nearly 27 times that of the gas−liquid vulcanization waste acid disposal technologies.展开更多
文摘Z-parameter method based on the Larson-Miller relationship is proposed to assess remaining life of a 1Cr5Mo steel. The non-linear master curve of stress a vs. Larson-Miller parameter P of the steel can be expressed as: P=29.608-5. 085logσ. A family of curves parallel to the master curve can be expressed as: P=29.608-Z-5.085logσ, where the value of Z represents the magnitude deviated from the master curve. A relationship between the value of Z-parameter and the level of spheroidization E (mi-crostructural degradation) can be expressed as: Z=0.203(E-1).
基金supported by the National Key Research and Development Program of China(Grant No.2022YFF1303405).
文摘Compared with traditional energy sources,wind power has a lower environmental impact.However,emissions are still generated across the life cycle of wind turbines,from production to recycling.As wind power rapidly develops and deployment increases,these impacts are becoming increasingly evident.A comprehensive understanding of these impacts is crucial for sustainable development.Based on the harmonization of previous detailed life cycle assessment(LCA)studies,this study develops a simplified LCA model that estimates the life cycle environmental impacts of wind turbines based on their nominal power.Using this simplified LCA model,we assess the global warming potential(GWP),acidification potential(AP),and cumulative energy demand(CED)of wind power at the regional scale for 2022 and under three future scenarios(high-power wind turbine promotion,reduced wind curtailment,and a comprehensive development scenario).The results indicate that in 2022,the life cycle GWP,AP,and CED of wind power in western China were 10.76 g CO_(2) eq/kWh,0.177 g SO_(2) eq/kWh,and 17.6 kJ/kWh,respectively.Scenario simulations suggest that reducing wind curtailment is the most effective approach for reducing emissions in Inner Mongolia,Gansu,Qinghai,Ningxia,and Xinjiang,producing average decreases of 8.64%in GWP,8.39%in AP,and 9.26%in CED.In contrast,for Guangxi,Chongqing,Sichuan,Guizhou,Yunnan,Xizang,and Shaanxi,the promotion of high-power wind turbines provides greater environmental benefits than reducing curtailment,producing average decreases of 3.45%,3.09%,and 4.29%in GWP,AP,and CED,respectively.These findings help clarify the environmental impact of wind power across its life cycle at the regional scale and provide theoretical references for the direction of future wind power development and the formulation of related policies.
基金Project(52479115)supported by the National Natural Science Foundation of ChinaProject(2024SF-YBXM-615)supported by the Key Research and Development Program of Shaanxi Province,China+1 种基金Project(2022943)supported by the Youth Innovation Team of Shaanxi Universities,ChinaProject(300102283721)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Using solid waste as a substitute for conventional cement has become an important way to reduce carbon emissions.This paper attempted to utilize steel slag(SS)and fly ash(FA)as supplementary cementitious material by utilizing CO_(2)mineralization curing technology.This study examined the dominant and interactive influences of the residual water/cement ratio,CO_(2)pressure,curing time,and SS content on the mechanical properties and CO_(2)uptake rate of CO_(2)mineralization curing SS-FA-Portland cement ternary paste specimens.Additionally,microstructural development was analyzed.The findings demonstrated that each factor significantly affected compressive strength and CO_(2)uptake rate,with factor interactions becoming more pronounced at higher SS dosages(>30%),lower residual water/cement ratios(0.1-0.15),and CO_(2)pressures of 0.1-0.3 MPa.Microscopic examinations revealed that mineralization primarily yielded CaCO_(3)and silica gel.The residual w/c ratio and SS content significantly influenced the CaCO_(3)content and crystallinity of the mineralization products.Post-mineralization curing,the percentage of pores larger than 50 nm significantly decreased,the proportion of harmless pores smaller than 20 nm increased,and pore structure improved.This study also found that using CO_(2)mineralization curing SS-FA-Portland cement solid waste concrete can significantly reduce the negative impact on the environment.
文摘With the increasingly serious environmental problems,the use of sustainable materials is particularly important.This study focuses on the greenhouse gas emissions and economic costs of wood over its life cycle as a sustainable resource.We use a systematic life cycle assessment(LCA)approach to assess the entire process from raw material collection,processing,use to disposal.The study found that using wood can significantly reduce greenhouse gas emissions compared to traditional building materials such as steel and concrete.In addition,although the initial procurement costs of wood may be higher,its maintenance costs are lower in the long run,making the life cycle costs generally more economical.The results of this study highlight the environmental and economic advantages of wood in the selection of sustainable building materials,and provide a scientific basis for promoting the use of wood.
基金supported by the National Key R&D Program of China(No.2020YFC1909005).
文摘The NdFeB scrap,as a representative solid waste of rare earths,possesses significant recyclable value.This study focused on NdFeB waste and investigated the environmental impacts of pyro-and hydro-metallurgical process(PH-M process)and its improved version,the pyro-and hydro-metallurgical improvement process(PH-Mi process).The results demonstrate that,although the PH-Mi process consumes higher amounts of energy,electricity,and chemicals compared to the PH-M process,it is more environmentally friendly and economically efficient(i.e.,net profit increased by 34.12%).To quantify and compare the environmental performance of the two scenarios,life cycle assessment methodology was applied.It is concluded that the PH-Mi process is superior to the PH-M process for eutrophication potential(EP)and the total environmental impacts.In comparison with PH-Mi process,PH-M process exhibits a certain advantage in terms of carbon footprint due to increased consumption of electricity and chemicals after the technological upgrade.
基金The authors would like to acknowledge CAPES (Higher Education Personnel Improvement Coordination) for the financial support given to this research.
文摘The purpose of this paper is to identify the processes with the highest contribution to potential environmental impacts in the life cycle of the masonry of concrete blocks by evaluating their main emissions contributing to impact categories and identifying hotspots for environmental improvements.The research is based on the Life Cycle Assessment(LCA)study of non-load-bearing masonry of concrete blocks performed by the authors.The processes those have demonstrated higher contribution to environmental impacts were identified in the Life Cycle Impact Assessment(LCIA)phase and a detailed analysis was carried out on the main substances derived from these processes.The highest potential impacts in the life cycle of the concrete blocks masonry can be attributed mainly to emissions coming from the production of Portland cement,which explains the peak of impact potential on the blocks production stage,but also the significant impact potential in the use of the blocks for masonry construction,due to the use of cement mortar.The results of this LCA study are part of a major research on the comparative analysis of different typologies of non-load-bearing external walls,which aims to contribute to the creation of a life cycle database of major building systems,to be used by the environmental certification systems of buildings.
基金The contract No.PRJ-395/DPKS/2022 or 2383/PKS/ITS/2022 on 14 November 2022.
文摘The total replacement of old fossil fuels poses obstacles,making the production of efficient biogasoline vital.Despite its potential as an environmentally friendly fossil fuel substitute,the life cycle assessment(LCA)of palm oil-derived biogasoline remains underexplored.This study investigated the production of biogasoline fromcrude palm oil(CPO)based biorefinery using catalytic cracking over mesoporousγ-Al_(2)O_(3) catalyst and LCA analysis.High selectivity of converting CPO into biogasoline was achieved by optimizing catalytic cracking parameters,including catalyst dose,temperature,and contact time.γ-Al_(2)O_(3) and CPO were characterized by several methods to study the physical and chemical properties.The physical properties of biogasoline,such as density,calorific value,viscosity,and flash point,were investigated.An overall yield of 60.11%was achieved after catalytic cracking produced several C5-C11 short-chain hydrocarbons.Additionally,this research proposes innovative emission reduction strategies,including waste-to-biogasoline conversion and the use of biodegradable feedstocks that enhance the sustainability of biogasoline production.LCA ofγ-Al_(2)O_(3)’s energy and environmental implications reveals minor effects on global warming(0.0068%)and freshwater ecotoxicity(0.187%).LCAs show a 0.085%impact in the energy sector.This focus on both ecological impacts and practical mitigation strategies deepens the understanding of biogasoline production.
基金funded by State Key Laboratory of Intelligent Construction and Healthy Operation andMaintenance ofDeepUnderground Engineering,grant number SDGZ2524Shandong Province Science and Technology Smes Ability Improvement Project,grant number 2025TSGCCZZB0258Major Innovation Project of Qilu University of Technology(Shandong Academy of Sciences),grant number 2025ZDZX03.
文摘Membrane gas absorption and solar-assisted absorbent regeneration offer a sustainable approach to reduce the energy penalty of post-combustion CO_(2) capture.This study introduces a novel system integrating solar thermal energy with membrane gas absorption to capture CO_(2) from a 580 MWe pulverized coal power plant.The environmental impacts across six scenarios at varying solar fractions are evaluated via life cycle assessment.Results show a 7.61%–13.04%reduction in global warming potential compared to a steam-driven CO_(2) capture system.Electricity and steam consumption dominate the operational phase,contributing 15%–64%and 18%–61%to environmental impacts in non-TES scenarios,respectively.While TES reduces most impacts,it increases stratospheric ozone depletion and marine eutrophication due to nitrate-based phase change materials and monoethanolamine.Higher solar fractions lower impacts in non-TES scenarios but elevate specific impacts in TES scenarios,highlighting trade-offs for sustainable CO_(2) capture deployment.
文摘Packaging materials are indispensable in modern industries but also significantly contribute to environmental degradation,resource consumption,and waste generation.This systematic review critically assesses the integration of artificial intelligence(AI),life cycle sustainability assessment(LCSA)following ISO 14040 standards,and circularity mapping to overcome sustainability barriers in packaging.The study identifies environmental,economic,and social hotspots across the life cycle stages of packaging materials by examining real-worldcase studies such as Coca-Cola’s adoption of recycled PET bottles andUnilever’s commitment to 100% recyclable plastic.AI technologies highlight transformative tools for optimising resource allocation,enhancing waste management,and supporting predictive maintenance in packaging systems.To maximise their impact,circular economy(CE)strategies,including material substitution,reusable packaging,and recycling,are discussed with AI-driven approaches.Policy frameworks like mandatory life cycle reporting and AI-focused capacity-building initiatives drive systemic change.The packaging industry achieves significant sustainability improvements by combining LCSA,CE principles,and AI while fostering economic benefits and social equity.This paper provides a comprehensive foundation for future research and practical applications to transform the packaging sector into a more sustainable and circular system.This review is the first to integrate LCSA,circular economy mapping,and AI applications in sustainable packaging.It highlights practical strategies and identifies research gaps to guide academia,industry,and policymakers toward scalable and intelligent sustainability solutions.Moreover,the review bridges methodological rigour with practical implementation by aligning digital intelligence with material sustainability frameworks,thus forming a multidisciplinary blueprint for a circular future in packaging.
基金support in the literature analysis.This study has been carried out in the framework of the project funded by EU entitled“Bioremediation of contaminated sediments in coastal areas of exindustrial sites-LIFE SEDREMED”(No.LIFE20 ENV/IT/000572).
文摘This study compares the environmental sustainability of five alternatives for the remediation of marine sediments of one of the most polluted coastal sites in Europe(Bagnoli-Coroglio bay,Mediterranean Sea),using the Life Cycle Assessment(LCA)methodology.The treatments are either in-situ or exsitu,the latter requiring an initial dredging to transport the contaminated sediments to the management site.More in detail,four ex-situ remediation technologies based on landfilling,bioremediation,electrokinetic technique and soil washing were identified.These technologies are compared to an in-situ strategy currently under validation for enhancing bioremediation of the polluted sediments of the Bagnoli-Coroglio site.Our results indicate that the disposal in landfilling site is the worst option in most categories(e.g.,650 kg CO_(2) eq./t of treated sediment,considering the nearest landfilling site),followed by the bioremediation,mainly due to the high energy demand.Electrokinetic remediation,soil washing,and innovative in-situ technology represent the most sustainable options.In particular,the new in-situ technology appears to be the least impacting in all categories(e.g.,54 kg CO_(2) eq./t of treated sediment),although it is expected to require longer treatment time(estimated up to 12 months based on its potential efficiency).It can reduce the impact on climate change more than 12 times compared to the disposal and 7 times compared to bioremediation in addition to the possibility to avoid/reduce the dredging operations and the consequent dispersion of pollutants.The results open relevant perspectives towards more eco-sustainable and costly effective actions for the reclamation of contaminated marine sediments.
文摘Improved life assessment techniques will enable engineering components to be replaced before failure, thereby reducing the risk of industrial accidents as well as minimizing financial loss due to unscheduled outages. For components operating at high temperatures, temperature measurement is very important. In many situations, the environmental conditions are too hostile for conventional techniques to be used. Researchers over the world have been looking for new techniques for temperature measurement and one such device, called Feroplug, has been developed previously by the and coworkers. The Feroplug has been patented in USA, UK and Europe by the British Technology Group. The underlying principle of the Feroplug is based on the transformation of ferrite in some specially designed duplex stainless steels. This paper describes a new invention called Sigmaplug which is a new development of the Feroplug but using an entirely different physical principle. It was discovered that the sigma phase in Fe
文摘Statistical manipulation of material data was conducted for probabilistic life assessment or risk-based design and maintenance for high temperature components of power plants. To obtain the statistical distribution of material properties, dominant parameters affecting material properties are introduced into normalization of statistical variables. Those parameters are hardness, chemical composition, characteristic micro structural features and so on. Creep and fatigue properties are expressed by normalized parameters and the unified statistical distributions are obtained. These probability distribution functions show good coincidence statistically with the field database of steam turbine components. It was concluded that the unified statistical baseline approach is useful for the risk management of components in power plants.
基金supported by the National Natural Science Foundation of China(Grant No.51675181)grateful for the Innovation Program of Shanghai Municipal Education Commission,China(Grant No.2019-01-07-00-02-E00068)。
文摘The creep life of an aeroengine recuperator is investigated in terms of continuum damage mechanics by using finite element simulations.The effects of the manifold wall thickness and creep properties of brazing filler metal on the operating life of the recuperator are analyzed.Results show that the crack initiates from the brazing filler metal located on the outer surface of the manifold with the wall thickness of 2 mm and propagates throughout the whole region of the brazing filler metal when the creep time reaches 34900 h.The creep life of the recuperator meets the requirement of 40000 h continuous operation when the wall thickness increases to 3.5 mm,but its total weight increases by 15%.Decreasing the minimum creep strain rate with the enhancement of the creep strength of the brazing filler metal presents an obvious effect on the creep life of the recuperator.At the same stress level,the creep rupture time of the recuperator is enhanced by 13 times if the mismatch between the minimum creep rate of the filler and base metal is reduced by 20%.
基金Supported by the Specialized Research Fund for the Doctoral Program of Higher Education (No 20090002110046)
文摘High-performing wearability and corrosion resistance are required for an exposed aluminum alloy bridge deck,but existing experimental research remains limited.In this paper,feasible test methods are proposed based on an experimental study on the wearability and corrosion resistance of the aluminum alloy bridge deck of the Bengbu Bridge in Tianjin,China.The line friction test of standard specimens was adopted,and the aluminum alloy bridge deck＇s wearability was calculated.The electrochemical test was conducted to measure the corrosion rate and morphology characteristics of specimens that were corroded in various solutions that simulated the atmospheric environment.The test results show that the wearability and corrosion resistance of the aluminum alloy bridge deck are sufficient and met the project＇s requirements.The test methods proposed have practical significance for future engineering research,and the test results are useful for other engineering applications of aluminum alloys.
基金Projects(71633006,71403298) supported by the National Natural Science Foundation of ChinaProjects(14YJCZH045,15YJCZH019) supported by the Ministry of Education of Humanities and Social Science,China
文摘Assessing and accounting for material consumption and environmental impact are necessary to measure environmental externalities of the aluminum industry and to construct an ecological civilization.In this research,life cycle assessment(LCA)theory was used to assess the environmental impact of primary aluminum based on the lime soda Bayer process and different power generation modes,and the sources and distributions of the four selected impact categories were analyzed.The results show that,(1)Negative environmental impact of aluminum industry generally occurs from alumina extraction,carbon anode fabrication and electrolysis,particularly electrolysis and alumina extraction.Primary energy demand(PED),water use(WU),global warming potential(GWP)and freshwater eutrophication potential(FEP)are main environmental impact categories.(2)The environmental load with thermal power is higher than that with hydropower,e.g.,for the former,the greenhouse gas emission coefficient of 21800 kg CO2 eq/t(Al)will be generated,while for the latter,4910 kg CO2 eq/t(Al)will be generated.(3)Both power mode methods reflect the energy structure,whereas direct emissions reflect the technical level,indicating the potential for large energy savings and emission reductions,and some policies,related to clean power,energy efficiency and technological progress,should be made for emission reduction.
基金Project(07dz12028) supported by the Science Program of Science and Technology Commission of Shanghai Municipality,China
文摘In 2008,around 596 000 t of aluminum dross was generated from secondary aluminum industry in China;however,it was not sufficiently recycled yet.Approximately 95% of the Al dross was land filled without innocent treatment.The purpose of this work is to investigate Al dross recycling by environmentally efficient and friendly methods.Two methods of Al dross recycling which could utilize Al dross efficiently were presented.High-quality aluminum-silicon alloys and brown fused alumina(BFA) were produced successfully by recycling Al dross.Then,life cycle assessment(LCA) was performed to evaluate environmental impact of two methods of Al dross recycling process.The results show that the two methods are reasonable and the average recovery rate of Al dross is up to 98%.As the LCA results indicate,they have some advantages such as less natural resource consumption and pollutant emissions,which efficiently relieves the burden on the environment in electrolytic aluminum and secondary aluminum industry.
基金Item Sponsored by Environmental Protection Public Welfare Scientific Research Project of China(200809025)National Basic Research Program of China(2005CB724206)
文摘The internal recycling process of BOF slag which is one of the huge solid wastes from iron and steel indus try was emphasized. Based on the four scenarios of different internal recycling strategies for BOF slag, life cycle assessment （LCA） as a valuable tool for industrial solid waste management was applied to analyze the contribution to reducing environmental impacts and resources burdens for each scenario. The global warming potential （GWP） re- sults of the four scenarios show that the scenario which performs best in carbon reduction cuts off 14.2G of GWP impacts of the worst scenario. The results of this study show that the optimized internal recycling process of BOF slag can improve the environmental performance of crude steel. It is important to assess and choose an appropriate strategy to recycle BOF slag from LCA perspective to reduce the environmental impacts and resource burdens as much as possible.
基金Supported by Doctoral Foundation of Henan Polytechnic University(Grant No.B2012-101)Opening Project of Key Laboratory of Precision Manufacturing Technology and Engineering of Henan Polytechnic University,China(Grant No.PMTE201318A)Henan Provincial Science and Technology Research Projects of Education Department of China(Grant No.14B460033)
文摘Pneumatic actuators and electric actuators have almost been applied to all manufacturing industries. The two kinds of actuators can replace each other in most fields, such as the point to point transmission occasion and some rotating occasions. However, there are very few research results about the advantages and disadvantages of two kinds of actuators under the same working conditions so far. In this paper, a novel comprehensive assessment method, named as overall life cycle comprehensive assessment （OLCCA）, is proposed for comparison and assessment of pneumatic and electric actuators. OLCCA contains mechanical properties evaluation （MPE）, life cycle cost analysis based on users （LCCABOU） and life cycle environmental impact analysis （LCEIA） algorithm in order to solve three difficult problems： mechanical properties assessment, cost analysis and environmental impact assessment about actuators. The mechanical properties evaluation of actuators is a multi-objective optimization problem. The fuzzy data quantification and information entropy methods are combined to establish MPE algorithm of actuators. Two kinds of pneumatic actuators and electric actuators with similar bearing capacity and similar work stroke were taken for example to verify the correctness of MPE algorithm. The case study of MPE algorithm for actuators verified its correctness. LCCABOU for actuators is also set up. Considering cost complex structure of pneumatic actuators, public device cost even method （PDCEM） is firstly presented to solve cost division of public devices such as compressors, aftercooler, receivers, etc. LCCABOU method is also effective and verified by the three groups of pneumatic actuators and electric actuators. Finally, LCEIA model of actuators is established for the environmental impact assessment of actuators. LCEIA data collection method and model establishment procedure for actuators are also put forward. With Simapro 7, LCEIA comparison results of six actuators can be obtained： Fossil fuels are the major environmental factor of pneumatic and electric actuators; Environmental impact of electric actuator is large than one of pneumatic actuator under the similar mechanical properties and working conditions of pneumatic and electric actuators. The results are correct and correspond with the actual mechanical properties of actuators. This paper proposes a comprehensive evaluation method of the actuators, which can solve the critical problem that similar electromechanical products are very difficult to be compared with each other from the angle of performance, cost and environment impact.
基金the National Key R&D Program of China(Nos.2018YFC1903304,2019YFC1907405)National Natural Science Foundation of China(No.51904354).
文摘Lift cycle assessment(LCA)methodology was applied to evaluating and comparing two waste acid disposal processes in zinc smelting.The results indicate that environmental impacts of gas−liquid vulcanization technologies are human toxicity,abiotic depletion potential,and global warming risk,which are mainly caused in neutralizing−evaporating−crystallization unit and electrodialysis unit.As for traditional lime neutralization method,vulcanization unit is the main factor.In this regard,the total environmental impact of traditional lime neutralization method is much higher than that of gas−liquid vulcanization technologies.Furthermore,the sensitive analysis shows that electricity and sodium sulfide(60%)are sensitive factors in two waste acid disposal technologies.In addition,the total cost of disposing a functional unit waste acid in traditional lime neutralization process is nearly 27 times that of the gas−liquid vulcanization waste acid disposal technologies.
