欧洲空间局的ENVISAT ASAR level 2算法是从合成孔径雷达(SAR)单视复图像反演涌浪方向谱的算法。该算法假设双峰海浪谱的SAR图像交叉谱是涌浪的图像交叉谱和风浪的图像交叉谱之和。实际上双峰海浪谱的SAR图像交叉谱中还有一个混合项,正...欧洲空间局的ENVISAT ASAR level 2算法是从合成孔径雷达(SAR)单视复图像反演涌浪方向谱的算法。该算法假设双峰海浪谱的SAR图像交叉谱是涌浪的图像交叉谱和风浪的图像交叉谱之和。实际上双峰海浪谱的SAR图像交叉谱中还有一个混合项,正是该混合项导致ENVI-SAT ASAR level 2算法有固有误差。利用遥感仿真的方法分析了不同海况条件下该算法的这一固有误差,结果表明,只有在有效波高较小、或风浪的成分较少、或双峰海浪的传播方向较靠近SAR距离向、或波长较长时固有误差才较小,ENVISAT ASAR level 2算法对海浪谱的反演才较为适用。展开更多
Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility （ABSL-2）, c...Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility （ABSL-2）, commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented.展开更多
Many new steel plate processing facilities have been built in the past 10 years around the world with many more being planned for the future.This is especially true in developing countries such as China,India and Braz...Many new steel plate processing facilities have been built in the past 10 years around the world with many more being planned for the future.This is especially true in developing countries such as China,India and Brazil.Many of these facilities are plate mills with either one or two stands or a Steckel mill,typically only one stand designed for the production of structural plate steels.Unfortunately,there is a lack of understanding with both the mill builders of the world and the mill owners on the importance of properly matching up the available slab supply (either new as part of a new plate/Steckel mill complex or part of an already existing) with the desired end plate product mix.Many mill builders and owners around the world believe that you can take any slab of any dimension and make any plate dimension you want.While this is basically true with today’s Level 2 automation systems,it does not always result in optimum metallurgy/mechanical properties or productivity.This less than optimum condition results in mechanical property failures,shape issues,productivity losses and in general a less than desirable costly processing operation.It is important to the overall optimization of a steel processing facility that the proper slab dimensions be used to produce the proper final plate dimensions along with achieving the required mechanical properties.The critical nature of this selection will be dependent on the final plate thickness and overall mechanical property requirements.Proper mechanical property,shape and overall microstructure are heavily dependent on the ability to properly work the entire cross section of the slab through the rolling process.Many mechanical property,shape and microstructural issues are a result of improper working of the entire cross section during rolling.The ability for a given mill to properly work the entire cross section is dependent on proper slab selection (total reduction ratio) and a proper rolling schedule either generated manually by the operator or by the mills Level 2 automation system.The proper working and more importantly the true metallurgy of the slab being rolled does not occur until any dimensional rolling passes have been completed.In fact,dimensional rolling passes may create a negative situation that will have to be overcome in the remainder of the rolling schedule.This paper will discuss the importance of proper slab selection for a given plate dimension and final product.Examples and guidelines will be given related to proper slab selection for final plate dimensions and mechanical property requirements.展开更多
Research on level 2 control system of 100 tons LF furnace was carried out.According to the principle of energy conservation and principle of mass conservation,the LF temperature prediction model and the composition pr...Research on level 2 control system of 100 tons LF furnace was carried out.According to the principle of energy conservation and principle of mass conservation,the LF temperature prediction model and the composition prediction model were established.At the same time,the set value calculated by heating model and addition model could be sent to PLC.The results show that the technical indexes of LF furnace level 2 control system reach the demand and the system realizes automatic control.展开更多
目的:分析格列吡嗪与二甲双胍联用治疗新发初诊2型糖尿病患者的应用价值。方法:研究对象选取2024年4月至2025年4月在本院收治的102例初诊2型糖尿病患者,以信封法随机分为联合组和二甲双胍组,两组均51例,二甲双胍组予以二甲双胍治疗,联...目的:分析格列吡嗪与二甲双胍联用治疗新发初诊2型糖尿病患者的应用价值。方法:研究对象选取2024年4月至2025年4月在本院收治的102例初诊2型糖尿病患者,以信封法随机分为联合组和二甲双胍组,两组均51例,二甲双胍组予以二甲双胍治疗,联合组予以格列吡嗪联合二甲双胍治疗,两组患者均干预3 m。比较两组血糖水平、空腹C肽、餐后2 h C肽、胰岛β细胞功能指数(Homeostasis model assessment-β,HOMA-β)、胰岛抵抗指数(Homeostasis model assessment-IR,HOMA-IR),统计不良反应。结果:治疗后,联合组在降低糖化血红蛋白、空腹血糖、餐后2 h血糖方面均优于二甲双胍组(P<0.05),两组空腹及餐后2 h C肽均较治疗前有显著升高(P<0.05),且联合组空腹及餐后2 h C肽均高于二甲双胍组(P<0.05),联合组HOMA-β高于二甲双胍组(P<0.05),HOMA-IR低于二甲双胍组(P<0.05),两组不良反应比较无明显差异(P>0.05)。结论:格列吡嗪与二甲双胍联合治疗新发2型糖尿病具有协同降糖效果,能有效改善胰岛β细胞功能,安全性良好。展开更多
The Level-2 probabilistic safety assessment(PSA) of pressurized water reactors studies the possibility of creep rupture for major reactor coolant system components during the course of high pressure severe accident se...The Level-2 probabilistic safety assessment(PSA) of pressurized water reactors studies the possibility of creep rupture for major reactor coolant system components during the course of high pressure severe accident sequences. The present paper covers this technical issue and tries to quantify its associated phenomenological uncertainties for the development of Level-2 PSA. A framework is proposed for the formal quantification of uncertainties in the Level-2 PSA model of a PWR type nuclear power plant using an integrated deterministic and PSA approach. This is demonstrated for estimation of creep rupture failure probability in station blackout severe accident of a 2-loop PWR, which is the representative case for high pressure sequences. MELCOR 1.8.6 code is employed here as the deterministic tool for the assessment of physical phenomena in the course of accident. In addition, a MATLAB code is developed for quantification of the probabilistic part by treating the uncertainties through separation of aleatory and epistemic sources of uncertainty.The probability for steam generator tube creep rupture is estimated at 0.17.展开更多
This study was conducted to investigate the combined effects of elevated CO2 levels and cadmium (Cd) on the root morphological traits and Cd accumulation in Lolium multiflorum Lam.and Lolium perenne L.exposed to two C...This study was conducted to investigate the combined effects of elevated CO2 levels and cadmium (Cd) on the root morphological traits and Cd accumulation in Lolium multiflorum Lam.and Lolium perenne L.exposed to two CO2 levels (360 and 1000 μl/L) and three Cd levels (0,4,and 16 mg/L) under hydroponic conditions.The results show that elevated levels of CO2 increased shoot biomass more,compared to root biomass,but decreased Cd concentrations in all plant tissues.Cd exposure caused toxicity to both Lolium species,as shown by the restrictions of the root morphological parameters including root length,surface area,volume,and tip numbers.These parameters were significantly higher under elevated levels of CO2 than under ambient CO2,especially for the number of fine roots.The increases in magnitudes of those parameters triggered by elevated levels of CO2 under Cd stress were more than those under non-Cd stress,suggesting an ameliorated Cd stress under elevated levels of CO2.The total Cd uptake per pot,calculated on the basis of biomass,was significantly greater under elevated levels of CO2 than under ambient CO2.Ameliorated Cd toxicity,decreased Cd concentration,and altered root morphological traits in both Lolium species under elevated levels of CO2 may have implications in food safety and phytoremediation.展开更多
To establish the parsimonious model for blood glucose monitoring in patients with type 2 diabetes receiving oral hypoglycemic agent treatment. One hundred and fifty-nine adult Chinese type 2 diabetes patients were ran...To establish the parsimonious model for blood glucose monitoring in patients with type 2 diabetes receiving oral hypoglycemic agent treatment. One hundred and fifty-nine adult Chinese type 2 diabetes patients were randomized to receive rapid-acting or sustained-release gliclazide therapy for 12 weeks.展开更多
BACKGROUND MMP-2 also known as gelatinase A and MMP-7(matrilysin)are members of the zinc-dependent family of MMPs(Matrix metalloproteinase).MMP-2 and MMP-7 are remodeling enzymes that digest extracellular matrix;MMP-2...BACKGROUND MMP-2 also known as gelatinase A and MMP-7(matrilysin)are members of the zinc-dependent family of MMPs(Matrix metalloproteinase).MMP-2 and MMP-7 are remodeling enzymes that digest extracellular matrix;MMP-2 is extensively expressed during development and is upregulated at sites of tissue damage,inflammation,and in stromal cells of metastatic tumors.MMP-7 is expressed in the epithelial cells and in a variety of cancers including colon tumors.Plasma MMP-2 and MMP-7 levels were assessed before and after minimally invasive colorectal resection for cancer pathology.AIM To determine plasma MMP-2 and MMP-7 levels before and after minimally invasive colorectal resection for cancer pathology.METHODS Patients enrolled in a plasma bank for whom plasma was available were eligible.Plasma obtained from preoperative(Preop)and postoperative blood samples was used.Only colorectal cancer(CRC)patients who underwent elective minimally invasive cancer resection with preop,post-operative day(POD)1,3 and at least 1 late postop sample(POD 7-34)were included.Late samples were bundled into 7 d blocks(POD 7-13,14-20,etc.)and treated as single time points.Plasma MMP-2 and MMP-7 levels were determined via enzyme-linked immunosorbent assay in duplicate.RESULTS Total 88 minimally invasive CRC resection CRC patients were studied(right colectomy,37%;sigmoid,24%;and LAR/AR 18%).Cancer stages were:1,31%;2,30%;3,34%;and 4,5%.Mean Preop MMP-2 plasma level(ng/mL)was 179.3±40.9(n=88).Elevated mean levels were noted on POD1(214.3±51.2,n=87,P<0.001),POD3(258.0±63.9,n=80,P<0.001),POD7-13(229.9±62.3,n=65,P<0.001),POD 14-20(234.9±47.5,n=25,P<0.001),POD 21-27(237.0±63.5,n=17,P<0.001,)and POD 28-34(255.4±59.7,n=15,P<0.001).Mean Preop MMP-7 level was 3.9±1.9(n=88).No significant differences were noted on POD 1 or 3,however,significantly elevated levels were noted on POD 7-13(5.7±2.5,n=65,P<0.001),POD 14-20(5.9±2.5,n=25,P<0.001),POD 21-27(6.1±3.6,n=17,P=0.002)and on POD 28-34(6.8±3.3,n=15 P<0.001,)vs preop levels.CONCLUSION MMP-2 levels are elevated for 5 wk and MMP-7 levels elevated for weeks 2-6.The etiology of these changes in unclear,trauma and wound healing likely play a role.These changes may promote residual tumor growth and metastasis.展开更多
文摘欧洲空间局的ENVISAT ASAR level 2算法是从合成孔径雷达(SAR)单视复图像反演涌浪方向谱的算法。该算法假设双峰海浪谱的SAR图像交叉谱是涌浪的图像交叉谱和风浪的图像交叉谱之和。实际上双峰海浪谱的SAR图像交叉谱中还有一个混合项,正是该混合项导致ENVI-SAT ASAR level 2算法有固有误差。利用遥感仿真的方法分析了不同海况条件下该算法的这一固有误差,结果表明,只有在有效波高较小、或风浪的成分较少、或双峰海浪的传播方向较靠近SAR距离向、或波长较长时固有误差才较小,ENVISAT ASAR level 2算法对海浪谱的反演才较为适用。
基金supported by the National Science and Technology Major Projects of Infectious Disease(2012ZX10004-404)
文摘Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility （ABSL-2）, commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented.
文摘Many new steel plate processing facilities have been built in the past 10 years around the world with many more being planned for the future.This is especially true in developing countries such as China,India and Brazil.Many of these facilities are plate mills with either one or two stands or a Steckel mill,typically only one stand designed for the production of structural plate steels.Unfortunately,there is a lack of understanding with both the mill builders of the world and the mill owners on the importance of properly matching up the available slab supply (either new as part of a new plate/Steckel mill complex or part of an already existing) with the desired end plate product mix.Many mill builders and owners around the world believe that you can take any slab of any dimension and make any plate dimension you want.While this is basically true with today’s Level 2 automation systems,it does not always result in optimum metallurgy/mechanical properties or productivity.This less than optimum condition results in mechanical property failures,shape issues,productivity losses and in general a less than desirable costly processing operation.It is important to the overall optimization of a steel processing facility that the proper slab dimensions be used to produce the proper final plate dimensions along with achieving the required mechanical properties.The critical nature of this selection will be dependent on the final plate thickness and overall mechanical property requirements.Proper mechanical property,shape and overall microstructure are heavily dependent on the ability to properly work the entire cross section of the slab through the rolling process.Many mechanical property,shape and microstructural issues are a result of improper working of the entire cross section during rolling.The ability for a given mill to properly work the entire cross section is dependent on proper slab selection (total reduction ratio) and a proper rolling schedule either generated manually by the operator or by the mills Level 2 automation system.The proper working and more importantly the true metallurgy of the slab being rolled does not occur until any dimensional rolling passes have been completed.In fact,dimensional rolling passes may create a negative situation that will have to be overcome in the remainder of the rolling schedule.This paper will discuss the importance of proper slab selection for a given plate dimension and final product.Examples and guidelines will be given related to proper slab selection for final plate dimensions and mechanical property requirements.
文摘Research on level 2 control system of 100 tons LF furnace was carried out.According to the principle of energy conservation and principle of mass conservation,the LF temperature prediction model and the composition prediction model were established.At the same time,the set value calculated by heating model and addition model could be sent to PLC.The results show that the technical indexes of LF furnace level 2 control system reach the demand and the system realizes automatic control.
文摘目的:分析格列吡嗪与二甲双胍联用治疗新发初诊2型糖尿病患者的应用价值。方法:研究对象选取2024年4月至2025年4月在本院收治的102例初诊2型糖尿病患者,以信封法随机分为联合组和二甲双胍组,两组均51例,二甲双胍组予以二甲双胍治疗,联合组予以格列吡嗪联合二甲双胍治疗,两组患者均干预3 m。比较两组血糖水平、空腹C肽、餐后2 h C肽、胰岛β细胞功能指数(Homeostasis model assessment-β,HOMA-β)、胰岛抵抗指数(Homeostasis model assessment-IR,HOMA-IR),统计不良反应。结果:治疗后,联合组在降低糖化血红蛋白、空腹血糖、餐后2 h血糖方面均优于二甲双胍组(P<0.05),两组空腹及餐后2 h C肽均较治疗前有显著升高(P<0.05),且联合组空腹及餐后2 h C肽均高于二甲双胍组(P<0.05),联合组HOMA-β高于二甲双胍组(P<0.05),HOMA-IR低于二甲双胍组(P<0.05),两组不良反应比较无明显差异(P>0.05)。结论:格列吡嗪与二甲双胍联合治疗新发2型糖尿病具有协同降糖效果,能有效改善胰岛β细胞功能,安全性良好。
文摘The Level-2 probabilistic safety assessment(PSA) of pressurized water reactors studies the possibility of creep rupture for major reactor coolant system components during the course of high pressure severe accident sequences. The present paper covers this technical issue and tries to quantify its associated phenomenological uncertainties for the development of Level-2 PSA. A framework is proposed for the formal quantification of uncertainties in the Level-2 PSA model of a PWR type nuclear power plant using an integrated deterministic and PSA approach. This is demonstrated for estimation of creep rupture failure probability in station blackout severe accident of a 2-loop PWR, which is the representative case for high pressure sequences. MELCOR 1.8.6 code is employed here as the deterministic tool for the assessment of physical phenomena in the course of accident. In addition, a MATLAB code is developed for quantification of the probabilistic part by treating the uncertainties through separation of aleatory and epistemic sources of uncertainty.The probability for steam generator tube creep rupture is estimated at 0.17.
基金Project supported by the Central Public Research Institute Basic Fund for Research and Development (2008-jxh-1),Agro-environmental Protection Institute,Ministry of Agriculture,China
文摘This study was conducted to investigate the combined effects of elevated CO2 levels and cadmium (Cd) on the root morphological traits and Cd accumulation in Lolium multiflorum Lam.and Lolium perenne L.exposed to two CO2 levels (360 and 1000 μl/L) and three Cd levels (0,4,and 16 mg/L) under hydroponic conditions.The results show that elevated levels of CO2 increased shoot biomass more,compared to root biomass,but decreased Cd concentrations in all plant tissues.Cd exposure caused toxicity to both Lolium species,as shown by the restrictions of the root morphological parameters including root length,surface area,volume,and tip numbers.These parameters were significantly higher under elevated levels of CO2 than under ambient CO2,especially for the number of fine roots.The increases in magnitudes of those parameters triggered by elevated levels of CO2 under Cd stress were more than those under non-Cd stress,suggesting an ameliorated Cd stress under elevated levels of CO2.The total Cd uptake per pot,calculated on the basis of biomass,was significantly greater under elevated levels of CO2 than under ambient CO2.Ameliorated Cd toxicity,decreased Cd concentration,and altered root morphological traits in both Lolium species under elevated levels of CO2 may have implications in food safety and phytoremediation.
文摘To establish the parsimonious model for blood glucose monitoring in patients with type 2 diabetes receiving oral hypoglycemic agent treatment. One hundred and fifty-nine adult Chinese type 2 diabetes patients were randomized to receive rapid-acting or sustained-release gliclazide therapy for 12 weeks.
文摘BACKGROUND MMP-2 also known as gelatinase A and MMP-7(matrilysin)are members of the zinc-dependent family of MMPs(Matrix metalloproteinase).MMP-2 and MMP-7 are remodeling enzymes that digest extracellular matrix;MMP-2 is extensively expressed during development and is upregulated at sites of tissue damage,inflammation,and in stromal cells of metastatic tumors.MMP-7 is expressed in the epithelial cells and in a variety of cancers including colon tumors.Plasma MMP-2 and MMP-7 levels were assessed before and after minimally invasive colorectal resection for cancer pathology.AIM To determine plasma MMP-2 and MMP-7 levels before and after minimally invasive colorectal resection for cancer pathology.METHODS Patients enrolled in a plasma bank for whom plasma was available were eligible.Plasma obtained from preoperative(Preop)and postoperative blood samples was used.Only colorectal cancer(CRC)patients who underwent elective minimally invasive cancer resection with preop,post-operative day(POD)1,3 and at least 1 late postop sample(POD 7-34)were included.Late samples were bundled into 7 d blocks(POD 7-13,14-20,etc.)and treated as single time points.Plasma MMP-2 and MMP-7 levels were determined via enzyme-linked immunosorbent assay in duplicate.RESULTS Total 88 minimally invasive CRC resection CRC patients were studied(right colectomy,37%;sigmoid,24%;and LAR/AR 18%).Cancer stages were:1,31%;2,30%;3,34%;and 4,5%.Mean Preop MMP-2 plasma level(ng/mL)was 179.3±40.9(n=88).Elevated mean levels were noted on POD1(214.3±51.2,n=87,P<0.001),POD3(258.0±63.9,n=80,P<0.001),POD7-13(229.9±62.3,n=65,P<0.001),POD 14-20(234.9±47.5,n=25,P<0.001),POD 21-27(237.0±63.5,n=17,P<0.001,)and POD 28-34(255.4±59.7,n=15,P<0.001).Mean Preop MMP-7 level was 3.9±1.9(n=88).No significant differences were noted on POD 1 or 3,however,significantly elevated levels were noted on POD 7-13(5.7±2.5,n=65,P<0.001),POD 14-20(5.9±2.5,n=25,P<0.001),POD 21-27(6.1±3.6,n=17,P=0.002)and on POD 28-34(6.8±3.3,n=15 P<0.001,)vs preop levels.CONCLUSION MMP-2 levels are elevated for 5 wk and MMP-7 levels elevated for weeks 2-6.The etiology of these changes in unclear,trauma and wound healing likely play a role.These changes may promote residual tumor growth and metastasis.
