Legendre polynomial method is well-known in modeling acoustic wave characteristics.This method uses for the mechanical displacements a single polynomial expansion over the entire sandwich layers.This results in a limi...Legendre polynomial method is well-known in modeling acoustic wave characteristics.This method uses for the mechanical displacements a single polynomial expansion over the entire sandwich layers.This results in a limitation in the accuracy of the field profile restitution.Thus,it can deal with the guided waves in layered sandwich only when the material properties of adjacent layers do not change significantly.Despite the great efforts regarding this issue in the literature,there remain open questions.One of them is:“what is the exact threshold of contrasting material properties of adjacent layers for which this polynomial method cannot correctly restitute the roots of guided waves?”We investigated this numerical issue using the calculated guided phase velocities in 0°/φ/0°-carbon fibre reinforced plastics(CFRP)sandwich plates with gradually increasing angleφ.Then,we approached this numerical problem by varying the middle layer thickness h90°for the 0°/90°/0°-CFRP sandwich structure,and we proposed an exact thickness threshold of the middle layer for the Legendre polynomial method limitations.We showed that the polynomial method fails to calculate the quasi-symmetric Lamb mode in 0°/φ/0°-CFRP whenφ>25°.Moreover,we introduced a new Lamb mode so-called minimum-group-velocity that has never been addressed in literature.展开更多
Using the technique of integration within an ordered product of operators and the intermediate coordinatemomentum representation in quantum optics, as well as the excited squeezed state we derive a new form of Legendr...Using the technique of integration within an ordered product of operators and the intermediate coordinatemomentum representation in quantum optics, as well as the excited squeezed state we derive a new form of Legendre polynomials.展开更多
Abstract A few important integrals involving the product of two universal associated Legendre polynomials Pl＇m＇, （x）,Pk＇n＇（x）and x2a（1-x2）-p-1,xb（1± x）-p-1and xc（1-x2）-p-1（1 ± x）axe evaluated...Abstract A few important integrals involving the product of two universal associated Legendre polynomials Pl＇m＇, （x）,Pk＇n＇（x）and x2a（1-x2）-p-1,xb（1± x）-p-1and xc（1-x2）-p-1（1 ± x）axe evaluated using the operator form of Taylor＇s theorem and an integral over a single universal associated Legendre polynomial. These integrals are more general since the quantum numbers are unequal, i.e.l＇ ≠ k＇ and m＇≠ n＇ .Their selection rules are a/so given. We also verify the correctness of those integral formulas numerically.展开更多
In this manuscript,an algorithm for the computation of numerical solutions to some variable order fractional differential equations(FDEs)subject to the boundary and initial conditions is developed.We use shifted Legen...In this manuscript,an algorithm for the computation of numerical solutions to some variable order fractional differential equations(FDEs)subject to the boundary and initial conditions is developed.We use shifted Legendre polynomials for the required numerical algorithm to develop some operational matrices.Further,operational matrices are constructed using variable order differentiation and integration.We are finding the operationalmatrices of variable order differentiation and integration by omitting the discretization of data.With the help of aforesaid matrices,considered FDEs are converted to algebraic equations of Sylvester type.Finally,the algebraic equations we get are solved with the help of mathematical software like Matlab or Mathematica to compute numerical solutions.Some examples are given to check the proposed method’s accuracy and graphical representations.Exact and numerical solutions are also compared in the paper for some examples.The efficiency of the method can be enhanced further by increasing the scale level.展开更多
We consider the problem of estimating the derivative of a function f from its noisy version fδby using the derivatives of the partial sums of Fourier-Legendre series of f. Instead of the observation Lspace, we perfor...We consider the problem of estimating the derivative of a function f from its noisy version fδby using the derivatives of the partial sums of Fourier-Legendre series of f. Instead of the observation Lspace, we perform the reconstruction of the derivative in a weighted Lspace. This takes full advantage of the properties of Legendre polynomials and results in a slight improvement on the convergence order. Finally, we provide several numerical examples to demonstrate the efficiency of the proposed method.展开更多
For every astronomical instrument, the operating conditions are undoubtedly different from those defined in a setup experiment. Besides environmental conditions, the drives, the electronic cabinets containing heaters ...For every astronomical instrument, the operating conditions are undoubtedly different from those defined in a setup experiment. Besides environmental conditions, the drives, the electronic cabinets containing heaters and fans introduce disturbances that must be taken into account already in the preliminary design phase. Such disturbances can be identified as being mostly of two types: heat sources/sinks or cooling systems responsible for heat transfer via conduction, radiation, free and forced convection on one side and random and periodic vibrations on the other. For this reason, a key role already from the very beginning of the design process is played by integrated model merging the outcomes based on a Finite Element Model from thermo-structural and modal analysis into the optical model to estimate the aberrations. The current paper presents the status of such model, capable of analyzing the deformed surfaces deriving from both thermo-structural and vibrational analyses and measuring their effect in terms of optical aberrations by fitting them by Zernike and Legendre polynomial fitting respectively for circular and rectangular apertures. The independent contribution of each aberration is satisfied by the orthogonality of the polynomials and mesh uniformity.展开更多
In machines learning problems, Support Vector Machine is a method of classification. For non-linearly separable data, kernel functions are a basic ingredient in the SVM technic. In this paper, we briefly recall some u...In machines learning problems, Support Vector Machine is a method of classification. For non-linearly separable data, kernel functions are a basic ingredient in the SVM technic. In this paper, we briefly recall some useful results on decomposition of RKHS. Based on orthogonal polynomial theory and Mercer theorem, we construct the high power Legendre polynomial kernel on the cube [-1,1]<sup>d</sup>. Following presentation of the theoretical background of SVM, we evaluate the performance of this kernel on some illustrative examples in comparison with Rbf, linear and polynomial kernels.展开更多
In this study, a new controller for chaos synchronization is proposed. It consists of a state feedback controller and a robust control term using Legendre polynomials to compensate for uncertainties. The truncation er...In this study, a new controller for chaos synchronization is proposed. It consists of a state feedback controller and a robust control term using Legendre polynomials to compensate for uncertainties. The truncation error is also considered. Due to the orthogonal functions theorem, Legendre polynomials can approximate nonlinear functions with arbitrarily small approximation errors. As a result, they can replace fuzzy systems and neural networks to estimate and compensate for uncertainties in control systems. Legendre polynomials have fewer tuning parameters than fuzzy systems and neural networks. Thus, their tuning process is simpler. Similar to the parameters of fuzzy systems, Legendre coefficients are estimated online using the adaptation rule obtained from the stability analysis. It is assumed that the master and slave systems are the Lorenz and Chen chaotic systems, respectively. In secure communication systems, observer-based synchronization is required since only one state variable of the master system is sent through the channel. The use of observer-based synchronization to obtain other state variables is discussed. Simulation results reveal the effectiveness of the proposed approach. A comparison with a fuzzy sliding mode controller shows that the proposed controller provides a superior transient response. The problem of secure communications is explained and the controller performance in secure communications is examined.展开更多
We investigate the use of an approximation method for obtaining near-optimal solutions to a kind of nonlinear continuous-time(CT) system. The approach derived from the Galerkin approximation is used to solve the gener...We investigate the use of an approximation method for obtaining near-optimal solutions to a kind of nonlinear continuous-time(CT) system. The approach derived from the Galerkin approximation is used to solve the generalized Hamilton-Jacobi-Bellman(GHJB) equations. The Galerkin approximation with Legendre polynomials(GALP) for GHJB equations has not been applied to nonlinear CT systems. The proposed GALP method solves the GHJB equations in CT systems on some well-defined region of attraction. The integrals that need to be computed are much fewer due to the orthogonal properties of Legendre polynomials, which is a significant advantage of this approach. The stabilization and convergence properties with regard to the iterative variable have been proved.Numerical examples show that the update control laws converge to the optimal control for nonlinear CT systems.展开更多
Some extremal properties of the integral of Legendre polynomials are given, which are of independent interest. Meanwhile they show that a conjecture of P. Erdos[1] is plausible and maybe provides some means to prove t...Some extremal properties of the integral of Legendre polynomials are given, which are of independent interest. Meanwhile they show that a conjecture of P. Erdos[1] is plausible and maybe provides some means to prove this conjecture.展开更多
We introduce a novel coarse ridge orientation smoothing algorithm based on orthogonal polynomials, which can be used to estimate the orientation field (OF) for fingerprint areas of no ridge information. This method do...We introduce a novel coarse ridge orientation smoothing algorithm based on orthogonal polynomials, which can be used to estimate the orientation field (OF) for fingerprint areas of no ridge information. This method does not need any base information of singular points (SPs). The algorithm uses a consecutive application of filtering-and model-based orientation smoothing methods. A Gaussian filter has been employed for the former. The latter conditionally employs one of the orthogonal polynomials such as Legendre and Chebyshev type I or II, based on the results obtained at the filtering-based stage. To evaluate our proposed method, a variety of exclusive fingerprint classification and minutiae-based matching experiments have been conducted on the fingerprint images of FVC2000 DB2, FVC2004 DB3 and DB4 databases. Results showed that our proposed method has achieved higher SP detection, classification, and verification performance as compared to competing methods.展开更多
Part variation characterization is essential to analyze the variation propagation in flexible assemblies. Aiming at two governing types of surface variation,warping and waviness,a comprehensive approach of geometric c...Part variation characterization is essential to analyze the variation propagation in flexible assemblies. Aiming at two governing types of surface variation,warping and waviness,a comprehensive approach of geometric covariance modeling based on hybrid polynomial approximation and spectrum analysis is proposed,which can formulate the level and the correlation of surface variations accurately. Firstly,the form error data of compliant part is acquired by CMM. Thereafter,a Fourier-Legendre polynomial decomposition is conducted and the error data are approximated by a Legendre polynomial series. The weighting coefficient of each component is decided by least square method for extracting the warping from the surface variation. Consequently,a geometrical covariance expression for warping deformation is established. Secondly,a Fourier-sinusoidal decomposition is utilized to approximate the waviness from the residual error data. The spectrum is analyzed is to identify the frequency and the amplitude of error data. Thus,a geometrical covariance expression for the waviness is deduced. Thirdly,a comprehensive geometric covariance model for surface variation is developed by the combination the Legendre polynomials with the sinusoidal polynomials. Finally,a group of L-shape sheet metals is measured along a specific contour,and the covariance of the profile errors is modeled by the proposed method. Thereafter,the result is compared with the covariance from two other methods and the real data. The result shows that the proposed covariance model can match the real surface error effectively and represents a tighter approximation error compared with the referred methods.展开更多
This paper proposes a new set of 3D rotation scaling and translation invariants of 3D radially shifted Legendre moments. We aim to develop two kinds of transformed shifted Legendre moments： a 3D substituted radial sh...This paper proposes a new set of 3D rotation scaling and translation invariants of 3D radially shifted Legendre moments. We aim to develop two kinds of transformed shifted Legendre moments： a 3D substituted radial shifted Legendre moments （3DSRSLMs） and a 3D weighted radial one （3DWRSLMs）. Both are centered on two types of polynomials. In the first case, a new 3D ra- dial complex moment is proposed. In the second case, new 3D substituted/weighted radial shifted Legendremoments （3DSRSLMs/3DWRSLMs） are introduced using a spherical representation of volumetric image. 3D invariants as derived from the sug- gested 3D radial shifted Legendre moments will appear in the third case. To confirm the proposed approach, we have resolved three is- sues. To confirm the proposed approach, we have resolved three issues： rotation, scaling and translation invariants. The result of experi- ments shows that the 3DSRSLMs and 3DWRSLMs have done better than the 3D radial complex moments with and without noise. Sim- ultaneously, the reconstruction converges rapidly to the original image using 3D radial 3DSRSLMs and 3DWRSLMs, and the test of 3D images are clearly recognized from a set of images that are available in Princeton shape benchmark （PSB） database for 3D image.展开更多
A class of second-order differential equations commonly arising in physics applications are considered,and their explicit hypergeometric solutions are provided. Further, the relationship with the Generalized and Unive...A class of second-order differential equations commonly arising in physics applications are considered,and their explicit hypergeometric solutions are provided. Further, the relationship with the Generalized and Universal Associated Legendre Equations are examined and established. The hypergeometric solutions, presented in this work,will promote future investigations of their mathematical properties and applications to problems in theoretical physics.展开更多
A spectral method based on the Legendre polynomials for solving Helmholz equations was proposed. With an explicit formula for the Legendre polynomials in terms of arbitrary order of their derivatives, the successive i...A spectral method based on the Legendre polynomials for solving Helmholz equations was proposed. With an explicit formula for the Legendre polynomials in terms of arbitrary order of their derivatives, the successive integration of the Legendre polynomials was represented by the Legendre polynomials. Then the method was formulized for secondorder differential equations in one dimension and two dimensions. Numerical results indicate that the suggested method is significantly accurate and in satisfactory agreement with the exact solution.展开更多
Starting from general Jacobi polynomials we derive for the Ul-traspherical polynomials as their special case a set of related polynomials which can be extended to an orthogonal set of functions with interesting proper...Starting from general Jacobi polynomials we derive for the Ul-traspherical polynomials as their special case a set of related polynomials which can be extended to an orthogonal set of functions with interesting properties. It leads to an alternative definition of the Ultraspherical polynomials by a fixed integral operator in application to powers of the variable u in an analogous way as it is possible for Hermite polynomials. From this follows a generating function which is apparently known only for the Legendre and Chebyshev polynomials as their special case. Furthermore, we show that the Ultraspherical polynomials form a realization of the SU(1,1) Lie algebra with lowering and raising operators which we explicitly determine. By reordering of multiplication and differentiation operators we derive new operator identities for the whole set of Jacobi polynomials which may be applied to arbitrary functions and provide then function identities. In this way we derive a new “convolution identity” for Jacobi polynomials and compare it with a known convolution identity of different structure for Gegenbauer polynomials. In short form we establish the connection of Jacobi polynomials and their related orthonormalized functions to the eigensolution of the Schrödinger equation to Pöschl-Teller potentials.展开更多
In expansions of arbitrary functions in Bessel functions or Spherical Bessel functions, a dual partner set of polynomials play a role. For the Bessel functions, these are the Chebyshev polynomials of first kind and fo...In expansions of arbitrary functions in Bessel functions or Spherical Bessel functions, a dual partner set of polynomials play a role. For the Bessel functions, these are the Chebyshev polynomials of first kind and for the Spherical Bessel functions the Legendre polynomials. These two sets of functions appear in many formulas of the expansion and in the completeness and (bi)-orthogonality relations. The analogy to expansions of functions in Taylor series and in moment series and to expansions in Hermite functions is elaborated. Besides other special expansion, we find the expansion of Bessel functions in Spherical Bessel functions and their inversion and of Chebyshev polynomials of first kind in Legendre polynomials and their inversion. For the operators which generate the Spherical Bessel functions from a basic Spherical Bessel function, the normally ordered (or disentangled) form is found.展开更多
The numerical approach for finding the solution of fractional order systems of boundary value problems (BPVs) is derived in this paper. The implementation of the weighted residuals such as Galerkin, Least Square, and ...The numerical approach for finding the solution of fractional order systems of boundary value problems (BPVs) is derived in this paper. The implementation of the weighted residuals such as Galerkin, Least Square, and Collocation methods are included for solving fractional order differential equations, which is broadened to acquire the approximate solutions of fractional order systems with differentiable polynomials, namely Legendre polynomials, as basis functions. The algorithm of the residual formulations of matrix form can be coded efficiently. The interpretation of Caputo fractional derivatives is employed here. We have demonstrated these methods numerically through a few examples of linear and nonlinear BVPs. The results in absolute errors show that the present method efficiently finds the numerical solutions of fractional order systems of differential equations.展开更多
Inspired by the recently proposed Legendre orthogonal polynomial representation for imaginary-time Green s functions G（τ）,we develop an alternate and superior representation for G（τ） and implement it in the hybr...Inspired by the recently proposed Legendre orthogonal polynomial representation for imaginary-time Green s functions G（τ）,we develop an alternate and superior representation for G（τ） and implement it in the hybridization expansion continuous-time quantum Monte Carlo impurity solver.This representation is based on the kernel polynomial method,which introduces some integral kernel functions to filter the numerical fluctuations caused by the explicit truncations of polynomial expansion series and can improve the computational precision significantly.As an illustration of the new representation,we re-examine the imaginary-time Green＇s functions of the single-band Hubbard model in the framework of dynamical mean-field theory.The calculated results suggest that with carefully chosen integral kernel functions,whether the system is metallic or insulating,the Gibbs oscillations found in the previous Legendre orthogonal polynomial representation have been vastly suppressed and remarkable corrections to the measured Green＇s functions have been obtained.展开更多
The selection of the truncation level （TL） and the control of boundary effect （BE） are critical in regional geomagnetic field models that are based on data fitting. We combine Taylor and Legendre polynomials to mo...The selection of the truncation level （TL） and the control of boundary effect （BE） are critical in regional geomagnetic field models that are based on data fitting. We combine Taylor and Legendre polynomials to model geomagnetic data over China's Mainland for years 1960, 1970, 1990, and 2000. To tackle the TL and BE problems, we first determine the range of TL by calculating the root-mean-square error （RMSE） of the models. Next, we determine the optimum TL using the Akaike information criterion （AIC） and the normalized root- mean-square error （NRMSE）. We use the regional anomaly addition （RAA） and the uniform addition （UA） method to add supplementary point outside the national boundary, and find that the intensities of extreme points gradually decrease and stabilize. The UA method better controls BEs over China, whereas the RAA method does a better job at smaller scales. In summary, we rely on a three-step method to determine the optimum TL and propose criteria to determine the optimum number of supplementary points.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.12102131).
文摘Legendre polynomial method is well-known in modeling acoustic wave characteristics.This method uses for the mechanical displacements a single polynomial expansion over the entire sandwich layers.This results in a limitation in the accuracy of the field profile restitution.Thus,it can deal with the guided waves in layered sandwich only when the material properties of adjacent layers do not change significantly.Despite the great efforts regarding this issue in the literature,there remain open questions.One of them is:“what is the exact threshold of contrasting material properties of adjacent layers for which this polynomial method cannot correctly restitute the roots of guided waves?”We investigated this numerical issue using the calculated guided phase velocities in 0°/φ/0°-carbon fibre reinforced plastics(CFRP)sandwich plates with gradually increasing angleφ.Then,we approached this numerical problem by varying the middle layer thickness h90°for the 0°/90°/0°-CFRP sandwich structure,and we proposed an exact thickness threshold of the middle layer for the Legendre polynomial method limitations.We showed that the polynomial method fails to calculate the quasi-symmetric Lamb mode in 0°/φ/0°-CFRP whenφ>25°.Moreover,we introduced a new Lamb mode so-called minimum-group-velocity that has never been addressed in literature.
文摘Using the technique of integration within an ordered product of operators and the intermediate coordinatemomentum representation in quantum optics, as well as the excited squeezed state we derive a new form of Legendre polynomials.
文摘Abstract A few important integrals involving the product of two universal associated Legendre polynomials Pl＇m＇, （x）,Pk＇n＇（x）and x2a（1-x2）-p-1,xb（1± x）-p-1and xc（1-x2）-p-1（1 ± x）axe evaluated using the operator form of Taylor＇s theorem and an integral over a single universal associated Legendre polynomial. These integrals are more general since the quantum numbers are unequal, i.e.l＇ ≠ k＇ and m＇≠ n＇ .Their selection rules are a/so given. We also verify the correctness of those integral formulas numerically.
基金Supporting Project No.(PNURSP2022R 14),Princess Nourah bint A bdurahman University,Riyadh,Saudi Arabia.
文摘In this manuscript,an algorithm for the computation of numerical solutions to some variable order fractional differential equations(FDEs)subject to the boundary and initial conditions is developed.We use shifted Legendre polynomials for the required numerical algorithm to develop some operational matrices.Further,operational matrices are constructed using variable order differentiation and integration.We are finding the operationalmatrices of variable order differentiation and integration by omitting the discretization of data.With the help of aforesaid matrices,considered FDEs are converted to algebraic equations of Sylvester type.Finally,the algebraic equations we get are solved with the help of mathematical software like Matlab or Mathematica to compute numerical solutions.Some examples are given to check the proposed method’s accuracy and graphical representations.Exact and numerical solutions are also compared in the paper for some examples.The efficiency of the method can be enhanced further by increasing the scale level.
基金Supported by the National Nature Science Foundation of China(Grant Nos.1130105211301045+4 种基金114010771127106011290143)the Fundamental Research Funds for the Central Universities(Grant No.DUT15RC(3)058)the Fundamental Research of Civil Aircraft(Grant No.MJ-F-2012-04)
文摘We consider the problem of estimating the derivative of a function f from its noisy version fδby using the derivatives of the partial sums of Fourier-Legendre series of f. Instead of the observation Lspace, we perform the reconstruction of the derivative in a weighted Lspace. This takes full advantage of the properties of Legendre polynomials and results in a slight improvement on the convergence order. Finally, we provide several numerical examples to demonstrate the efficiency of the proposed method.
文摘For every astronomical instrument, the operating conditions are undoubtedly different from those defined in a setup experiment. Besides environmental conditions, the drives, the electronic cabinets containing heaters and fans introduce disturbances that must be taken into account already in the preliminary design phase. Such disturbances can be identified as being mostly of two types: heat sources/sinks or cooling systems responsible for heat transfer via conduction, radiation, free and forced convection on one side and random and periodic vibrations on the other. For this reason, a key role already from the very beginning of the design process is played by integrated model merging the outcomes based on a Finite Element Model from thermo-structural and modal analysis into the optical model to estimate the aberrations. The current paper presents the status of such model, capable of analyzing the deformed surfaces deriving from both thermo-structural and vibrational analyses and measuring their effect in terms of optical aberrations by fitting them by Zernike and Legendre polynomial fitting respectively for circular and rectangular apertures. The independent contribution of each aberration is satisfied by the orthogonality of the polynomials and mesh uniformity.
文摘In machines learning problems, Support Vector Machine is a method of classification. For non-linearly separable data, kernel functions are a basic ingredient in the SVM technic. In this paper, we briefly recall some useful results on decomposition of RKHS. Based on orthogonal polynomial theory and Mercer theorem, we construct the high power Legendre polynomial kernel on the cube [-1,1]<sup>d</sup>. Following presentation of the theoretical background of SVM, we evaluate the performance of this kernel on some illustrative examples in comparison with Rbf, linear and polynomial kernels.
文摘In this study, a new controller for chaos synchronization is proposed. It consists of a state feedback controller and a robust control term using Legendre polynomials to compensate for uncertainties. The truncation error is also considered. Due to the orthogonal functions theorem, Legendre polynomials can approximate nonlinear functions with arbitrarily small approximation errors. As a result, they can replace fuzzy systems and neural networks to estimate and compensate for uncertainties in control systems. Legendre polynomials have fewer tuning parameters than fuzzy systems and neural networks. Thus, their tuning process is simpler. Similar to the parameters of fuzzy systems, Legendre coefficients are estimated online using the adaptation rule obtained from the stability analysis. It is assumed that the master and slave systems are the Lorenz and Chen chaotic systems, respectively. In secure communication systems, observer-based synchronization is required since only one state variable of the master system is sent through the channel. The use of observer-based synchronization to obtain other state variables is discussed. Simulation results reveal the effectiveness of the proposed approach. A comparison with a fuzzy sliding mode controller shows that the proposed controller provides a superior transient response. The problem of secure communications is explained and the controller performance in secure communications is examined.
基金supported by the China Postdoctoral Science Foundation(No.2013M531842)the Natural Science Foundation of Guangdong Province,China(No.2015A030313497)the Science and Technology Program of Guangzhou,China(No.2014KP000039)
文摘We investigate the use of an approximation method for obtaining near-optimal solutions to a kind of nonlinear continuous-time(CT) system. The approach derived from the Galerkin approximation is used to solve the generalized Hamilton-Jacobi-Bellman(GHJB) equations. The Galerkin approximation with Legendre polynomials(GALP) for GHJB equations has not been applied to nonlinear CT systems. The proposed GALP method solves the GHJB equations in CT systems on some well-defined region of attraction. The integrals that need to be computed are much fewer due to the orthogonal properties of Legendre polynomials, which is a significant advantage of this approach. The stabilization and convergence properties with regard to the iterative variable have been proved.Numerical examples show that the update control laws converge to the optimal control for nonlinear CT systems.
基金the National Natural Science Foundation of China (No.19671082).
文摘Some extremal properties of the integral of Legendre polynomials are given, which are of independent interest. Meanwhile they show that a conjecture of P. Erdos[1] is plausible and maybe provides some means to prove this conjecture.
文摘We introduce a novel coarse ridge orientation smoothing algorithm based on orthogonal polynomials, which can be used to estimate the orientation field (OF) for fingerprint areas of no ridge information. This method does not need any base information of singular points (SPs). The algorithm uses a consecutive application of filtering-and model-based orientation smoothing methods. A Gaussian filter has been employed for the former. The latter conditionally employs one of the orthogonal polynomials such as Legendre and Chebyshev type I or II, based on the results obtained at the filtering-based stage. To evaluate our proposed method, a variety of exclusive fingerprint classification and minutiae-based matching experiments have been conducted on the fingerprint images of FVC2000 DB2, FVC2004 DB3 and DB4 databases. Results showed that our proposed method has achieved higher SP detection, classification, and verification performance as compared to competing methods.
基金Supported by the National Natural Science Foundation of China(50905084,51275236)the Aeronautical Science Foundation of China(2010ZE52054)
文摘Part variation characterization is essential to analyze the variation propagation in flexible assemblies. Aiming at two governing types of surface variation,warping and waviness,a comprehensive approach of geometric covariance modeling based on hybrid polynomial approximation and spectrum analysis is proposed,which can formulate the level and the correlation of surface variations accurately. Firstly,the form error data of compliant part is acquired by CMM. Thereafter,a Fourier-Legendre polynomial decomposition is conducted and the error data are approximated by a Legendre polynomial series. The weighting coefficient of each component is decided by least square method for extracting the warping from the surface variation. Consequently,a geometrical covariance expression for warping deformation is established. Secondly,a Fourier-sinusoidal decomposition is utilized to approximate the waviness from the residual error data. The spectrum is analyzed is to identify the frequency and the amplitude of error data. Thus,a geometrical covariance expression for the waviness is deduced. Thirdly,a comprehensive geometric covariance model for surface variation is developed by the combination the Legendre polynomials with the sinusoidal polynomials. Finally,a group of L-shape sheet metals is measured along a specific contour,and the covariance of the profile errors is modeled by the proposed method. Thereafter,the result is compared with the covariance from two other methods and the real data. The result shows that the proposed covariance model can match the real surface error effectively and represents a tighter approximation error compared with the referred methods.
文摘This paper proposes a new set of 3D rotation scaling and translation invariants of 3D radially shifted Legendre moments. We aim to develop two kinds of transformed shifted Legendre moments： a 3D substituted radial shifted Legendre moments （3DSRSLMs） and a 3D weighted radial one （3DWRSLMs）. Both are centered on two types of polynomials. In the first case, a new 3D ra- dial complex moment is proposed. In the second case, new 3D substituted/weighted radial shifted Legendremoments （3DSRSLMs/3DWRSLMs） are introduced using a spherical representation of volumetric image. 3D invariants as derived from the sug- gested 3D radial shifted Legendre moments will appear in the third case. To confirm the proposed approach, we have resolved three is- sues. To confirm the proposed approach, we have resolved three issues： rotation, scaling and translation invariants. The result of experi- ments shows that the 3DSRSLMs and 3DWRSLMs have done better than the 3D radial complex moments with and without noise. Sim- ultaneously, the reconstruction converges rapidly to the original image using 3D radial 3DSRSLMs and 3DWRSLMs, and the test of 3D images are clearly recognized from a set of images that are available in Princeton shape benchmark （PSB） database for 3D image.
基金Supported of Natural Sciences and Engineering Research Council of Canada under Grant No.GP249507
文摘A class of second-order differential equations commonly arising in physics applications are considered,and their explicit hypergeometric solutions are provided. Further, the relationship with the Generalized and Universal Associated Legendre Equations are examined and established. The hypergeometric solutions, presented in this work,will promote future investigations of their mathematical properties and applications to problems in theoretical physics.
基金Project supported by the National Natural Science Foundation of China （Grant No.10471472）
文摘A spectral method based on the Legendre polynomials for solving Helmholz equations was proposed. With an explicit formula for the Legendre polynomials in terms of arbitrary order of their derivatives, the successive integration of the Legendre polynomials was represented by the Legendre polynomials. Then the method was formulized for secondorder differential equations in one dimension and two dimensions. Numerical results indicate that the suggested method is significantly accurate and in satisfactory agreement with the exact solution.
文摘Starting from general Jacobi polynomials we derive for the Ul-traspherical polynomials as their special case a set of related polynomials which can be extended to an orthogonal set of functions with interesting properties. It leads to an alternative definition of the Ultraspherical polynomials by a fixed integral operator in application to powers of the variable u in an analogous way as it is possible for Hermite polynomials. From this follows a generating function which is apparently known only for the Legendre and Chebyshev polynomials as their special case. Furthermore, we show that the Ultraspherical polynomials form a realization of the SU(1,1) Lie algebra with lowering and raising operators which we explicitly determine. By reordering of multiplication and differentiation operators we derive new operator identities for the whole set of Jacobi polynomials which may be applied to arbitrary functions and provide then function identities. In this way we derive a new “convolution identity” for Jacobi polynomials and compare it with a known convolution identity of different structure for Gegenbauer polynomials. In short form we establish the connection of Jacobi polynomials and their related orthonormalized functions to the eigensolution of the Schrödinger equation to Pöschl-Teller potentials.
文摘In expansions of arbitrary functions in Bessel functions or Spherical Bessel functions, a dual partner set of polynomials play a role. For the Bessel functions, these are the Chebyshev polynomials of first kind and for the Spherical Bessel functions the Legendre polynomials. These two sets of functions appear in many formulas of the expansion and in the completeness and (bi)-orthogonality relations. The analogy to expansions of functions in Taylor series and in moment series and to expansions in Hermite functions is elaborated. Besides other special expansion, we find the expansion of Bessel functions in Spherical Bessel functions and their inversion and of Chebyshev polynomials of first kind in Legendre polynomials and their inversion. For the operators which generate the Spherical Bessel functions from a basic Spherical Bessel function, the normally ordered (or disentangled) form is found.
文摘The numerical approach for finding the solution of fractional order systems of boundary value problems (BPVs) is derived in this paper. The implementation of the weighted residuals such as Galerkin, Least Square, and Collocation methods are included for solving fractional order differential equations, which is broadened to acquire the approximate solutions of fractional order systems with differentiable polynomials, namely Legendre polynomials, as basis functions. The algorithm of the residual formulations of matrix form can be coded efficiently. The interpretation of Caputo fractional derivatives is employed here. We have demonstrated these methods numerically through a few examples of linear and nonlinear BVPs. The results in absolute errors show that the present method efficiently finds the numerical solutions of fractional order systems of differential equations.
基金Project supported by the National Natural Science Foundation of China(Grant No.11504340)
文摘Inspired by the recently proposed Legendre orthogonal polynomial representation for imaginary-time Green s functions G（τ）,we develop an alternate and superior representation for G（τ） and implement it in the hybridization expansion continuous-time quantum Monte Carlo impurity solver.This representation is based on the kernel polynomial method,which introduces some integral kernel functions to filter the numerical fluctuations caused by the explicit truncations of polynomial expansion series and can improve the computational precision significantly.As an illustration of the new representation,we re-examine the imaginary-time Green＇s functions of the single-band Hubbard model in the framework of dynamical mean-field theory.The calculated results suggest that with carefully chosen integral kernel functions,whether the system is metallic or insulating,the Gibbs oscillations found in the previous Legendre orthogonal polynomial representation have been vastly suppressed and remarkable corrections to the measured Green＇s functions have been obtained.
基金supported by the National Natural Science Foundation of China(Grant Nos.41404053 and 41174165)Special Project for Meteo-Scientific Research in the Public Interest(Grant No.GYHY201306073)Natural Science Foundation of Higher Education Institutions of Jiangsu Province,China(Grant No.14KJB170012)
文摘The selection of the truncation level （TL） and the control of boundary effect （BE） are critical in regional geomagnetic field models that are based on data fitting. We combine Taylor and Legendre polynomials to model geomagnetic data over China's Mainland for years 1960, 1970, 1990, and 2000. To tackle the TL and BE problems, we first determine the range of TL by calculating the root-mean-square error （RMSE） of the models. Next, we determine the optimum TL using the Akaike information criterion （AIC） and the normalized root- mean-square error （NRMSE）. We use the regional anomaly addition （RAA） and the uniform addition （UA） method to add supplementary point outside the national boundary, and find that the intensities of extreme points gradually decrease and stabilize. The UA method better controls BEs over China, whereas the RAA method does a better job at smaller scales. In summary, we rely on a three-step method to determine the optimum TL and propose criteria to determine the optimum number of supplementary points.
