The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programmi...The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programming(LGP)has been developed for a full-scale annular ramjet combustor.The LGP is used to generate control laws that include multi-frequency forcing.These laws are then transformed into square waves to actuate the solenoid valve,which modulates the kerosene supply for open-loop control.The results show that the duty cycle has little effect on instability amplitude,whereas an increase in frequency leads to a remarked reduction in combustion amplitude.After five generations evolvements,the pressure amplitude is reduced by 40.6% under the optimal control law generated by LGP.Furthermore,the machine learning process is depicted using a proximity map of control law similarity,with the search pathway visualized by the steepest descent.All individuals go forward to the upper left corner of the map with the evolution process,terminating at the optimal individual of the fifth generation.展开更多
1.Challenges Thermoacoustic instability in combustors arises from the interaction between sound waves and unsteady heat release,commonly found in systems like gas turbines and aeroengines.This instability leads to und...1.Challenges Thermoacoustic instability in combustors arises from the interaction between sound waves and unsteady heat release,commonly found in systems like gas turbines and aeroengines.This instability leads to undesirable consequences such as structural damage and performance deterioration.The challenge lies in predicting and mitigating these instabilities due to the complex interplay of various physical phenomena like acoustic propagation,turbulent flow,and combustion chemistry,which are summarized in detail in Aimee S.Morgans and Dong Yang's published article.展开更多
The spatiotemporal distribution of soot concentration in aero-engine combustor is important for assessing its combustion performance.Here,we report experimental measurements of soot concentration in terms of Soot Volu...The spatiotemporal distribution of soot concentration in aero-engine combustor is important for assessing its combustion performance.Here,we report experimental measurements of soot concentration in terms of Soot Volume Fraction(SVF)and its spatiotemporal distribution in a single-sector dual-swirl aero-engine combustor using Two-Color Laser-Induced Incandescence(2C-LII).It is shown that soot predominantly forms in the symmetrical vortices of the primary combustion zone,exhibiting a V-type distribution with higher concentration in the lower half of the zone than the upper half,with a small amount distributed in the secondary recirculation zone.Soot emissions at the combustor outlet are relatively low under three typical operating conditions by LII experiments,which is aligned with Smoke Number(SN)from gas analysis.The effect of inlet air temperature on SVF distribution and dynamics in the primary combustion zone is studied,which suggests that the SVF level in the primary combustion zone monotonically increases with the temperature.Meanwhile,the SVF distribution becomes more symmetrical as the inlet temperature increases,although the overall SVF level in the lower half of the zone is still higher.We also investigate the influence of the inlet air pressure on the SVF distribution at the combustor outlet.The soot concentration at the combustor outlet increases with inlet pressure,mainly distributed irregularly across both sides and the center.On both sides,the distribution is continuous,while the center exhibits dot-like and linear patterns.Numerical simulations correlated SVF distribution with the flow field in the primary combustion zone,qualitatively explaining the observed SVF distribution behavior.These results under various conditions can provide valuable insights for improving the performance of this specific combustor and designing high-temperature-rise combustors in the future.展开更多
Knowing the optimal operating parameters of Stirling engines is important for efficient combustion through adaptability to changed pressures and oxygen atmospheres. In this study, the optimum operating conditions for ...Knowing the optimal operating parameters of Stirling engines is important for efficient combustion through adaptability to changed pressures and oxygen atmospheres. In this study, the optimum operating conditions for efficient combustion in a singular Stirling engine combustor at different oxygen atmospheres were investigated and determined. Numerical simulations were performed to investigate the effects of ejection ratio and pressure on combustion performance. In an oxygen/carbon dioxide atmosphere, the results show that increasing the ejection ratio substantially alters the flame distribution in the Stirling engine combustor, increasing heat transfer and external combustion efficiency. In contrast, increasing the ejection ratio reduces the average and maximum temperatures of the Stirling engine combustor. Increased pressure affects the flame distribution in the Stirling engine combustor and impedes the flow and convective heat transfer in the combustor, reducing the overall external combustion efficiency at pressures above 6.5 MPa. In an air/carbon dioxide atmosphere, an increased ejection ratio reduces the average and maximum temperatures in the Stirling engine combustor. However, the overall flame distribution does not change substantially. The external combustion efficiency tends to increase and then decrease because of two opposing factors: the increase in the convective heat transfer coefficient and the decrease in the temperature difference. Increasing pressure inhibits forced convection heat transfer in the Stirling engine combustor, reducing external combustion efficiency, which drops from 78% to 65% when pressure increases from 0.2 MPa to 0.5 MPa.展开更多
A numerical and experimental study was conducted to investigate the Laser Ablation(LA)ignition mode in an ethylene-fueled supersonic combustor with a cavity flameholder.Theexperiments were operated under a Mach number...A numerical and experimental study was conducted to investigate the Laser Ablation(LA)ignition mode in an ethylene-fueled supersonic combustor with a cavity flameholder.Theexperiments were operated under a Mach number 2.92 supersonic inflow,with stagnation pressureof 2.4 MPa and stagnation temperature of 1600 K.Reynolds-averaged Navier-Stokes simulationswere conducted to characterize the mixing process and flow field structure.This study identifiedfour distinct LA ignition modes.Under the specified condition,laser ablation in zero and negativedefocusing states manifested two distinct ignition modes termed Laser Ablation Direct Ignition(LADI)mode and Laser Ablation Re-Ignition(LARI)mode,correspondingly.LA ignition in alocal small cavity,created by depressing the flow field regulator,could facilitate the ignition modetransforming from LARI mode to Laser Ablation Transition Ignition(LATI)mode.On the otherhand,the elevation of the flow field regulator effectively inhibited the forward propagation of theinitial flame kernel and reduced the dissipation of LA plasma,further enhancing the LADI mode.Based on these characteristics,the LADI mode was subdivided into strong(LADI-S)and weak(LADI-W)modes.Facilitating the transition of ignition modes through alterations in the local flowfield could contribute to attaining a more effective and stable LA ignition.展开更多
Precise and quantitative measurement of soot particle emission plays an essential role in accurately assessing the combustion performance of aero-engine combustors and infrared signature levels in aircraft exhausts.Am...Precise and quantitative measurement of soot particle emission plays an essential role in accurately assessing the combustion performance of aero-engine combustors and infrared signature levels in aircraft exhausts.Among various intrusive or non-intrusive approaches for soot diagnostics,Laser-Induced Incandescence(LⅡ)technique has been increasingly applied for soot concentration measurement in various combustion environments such as laminar flames and internal combustion engines due to its high spatial resolution and sensitivity.As for LⅡmeasurement in aero-engine combustors,however,it normally suffers from very limited optical accesses and often faces mandatory requirements of oblique imaging from a small backward angle.In this work,we demonstrate a Two-Color(2C)LⅡsystem that simultaneously captures LⅡsignal images at two distinct wavelengths using a Scheimpflug imaging configuration.A projective transformation algorithm and image overlapping procedures were employed to spatially correct the raw Scheimpflug LⅡimages.Performance validation of the developed 2C-Scheimpflug LⅡsystem was first conducted under specified conditions in a laminar C_(2)H_(4)/air McKenna flame.The obtained Soot Volume Fraction(SVF)level and its spatial distribution are in consistent with previous studies under identical flame conditions reported by other research groups.Finally,as a demonstration of engineering benchmark application,we applied the developed 2C-Scheimpflug LⅡsystem to measure SVF distribution in the cross-section plane perpendicular to the direction of flame propagation at the exhaust of a single-sector dual-swirl aero-engine model combustor.Transient soot production events were observed and characteristics of the SVF distribution were investigated.These experimental results suggest the feasibility of the 2C-Scheimpflug LⅡtechnique developed in this work for precise and quantitative measurements of soot concentration in practical environments.展开更多
This paper describes an experimental study investigating the effects of sinusoidal pulsed injection on the combustion mode transition in a dual-mode supersonic combustor.The results are obtained under inflow condition...This paper describes an experimental study investigating the effects of sinusoidal pulsed injection on the combustion mode transition in a dual-mode supersonic combustor.The results are obtained under inflow conditions of 2.9 MPa stagnation pressure,1900 K stagnation temperature,and Mach number of 3.0.It has been observed that,at the same equivalence ratio,the combustion mode and flow field structure undergo irreversible changes from a weak combustion state to a strong combustion state at a specific pulsed jet frequency compared to steady jet.For steady jet,the combustion mode is dual-mode.As the frequency of the unsteady jet changes,the combustion mode also changes:it becomes a transition mode at frequencies of 171 Hz and 260 Hz,and a ramjet mode at 216 Hz.Combustion instability under steady jet manifests as a transition in flame stabilization mode.In contrast,under pulsed jet,combustion instability appears either as a transition in flame stabilization mode or as flame blow-off and flashback.The flow field oscillation frequency in the non-reacting flow is 171 Hz,which may resonate with the 171 Hz pulsed jet frequency,making the combustion oscillations most pronounced at this frequency.When the jet frequency is increased to 216 Hz,the combustion intensity significantly increases,and the combustion mode transfers to the ramjet mode.However,further increasing the frequency to 260 Hz results in a decrease in combustion intensity,returning to the transition mode.The frequency of the flow field oscillations varies with the coupling of the pulsed injection frequency,shock wave,and flame,and if the system reaches an unstable state,that is,pre-combustion shock train moves far upstream of the isolator during the pulsed jet period,strong combustion state can be achieved,and this process is irreversible.展开更多
Quantitative measurement of Soot Volume Fraction (SVF) is an essential prerequisite for controlling soot particle emissions from aero-engine combustors. As an in-situ and non-intrusive optical diagnostic technique, La...Quantitative measurement of Soot Volume Fraction (SVF) is an essential prerequisite for controlling soot particle emissions from aero-engine combustors. As an in-situ and non-intrusive optical diagnostic technique, Laser-Induced Incandescence (LII) has been increasingly applied for soot concentration quantification in various combustion environments such as laminar flame, vehicle exhaust, internal combustion chamber as well as aero-engine combustor. In this work, we experimentally measured the spatial and temporal distribution of SVF using two-color LII technique at the outlet of a single-sector dual-swirl aero-engine model combustor. The effect of inlet pressure and air preheat temperature on the SVF distribution was separately investigated within a pressure range of 241–425 kPa and a temperature range of 292–500 K. The results show that soot production increases with the inlet pressure but generally decreases with the air preheat temperature. Qualitative analysis was provided to explain the above results of parametric studies. The LII experiments were also conducted under 3 designed conditions to evaluate soot emission under practical operations. Particularly, weak soot emission was detected at the outlet under the idle condition. Our experimental results provide a valuable benchmark for evaluating soot emission in the exhaust plume of this aero-engine combustor during practical operations.展开更多
To provide advanced diagnostic techniques for diagnosing the outlet temperature distribution and species concentrations of future advanced combustors,this study focuses on a dual-swirl single-dome rectangular combusto...To provide advanced diagnostic techniques for diagnosing the outlet temperature distribution and species concentrations of future advanced combustors,this study focuses on a dual-swirl single-dome rectangular combustor.Through the integration of multiple diagnostics,simultaneous measurement of outlet temperature distribution and species concentrations was achieved.The study validates the engineering applicability of these simultaneous measurements using tungsten-rhenium(W-Re)thermocouples and Coherent Anti-Stokes Raman Scattering(CARS),CARS and Tunable Diode Laser Absorption Spectroscopy(TDLAS),as well as Gas Analysis(GA)and Mass Spectrometry(MS).The results demonstrate that measurements by thermocouples and CARS exhibit good consistency and repeatability,with a relative deviation of less than 4%,fully meeting the requirements of engineering experiments.The spatial distribution reconstruction results of TDLAS can reflect the temperature distribution characteristics at the combustor outlet.Temperature comparison between TDLAS and CARS at single-point positions shows consistent results,with a relative deviation of less than 11%and 7%under both conditions,respectively.Simultaneous measurements by integrating GA and MS show high engineering applicability for the first time,meeting the requirements for measuring both inorganic species and free radicals at the combustor outlet.Under C_(1)condition,the relative deviations of four key species(Unburned Hydrocarbon(UHC),NO,O_(2),and CO_(2))remain within 2%,while that of NO_(2)is slightly higher at approximately 8%.Under C_(2)condition,the overall deviations increase for most species,with only O_(2)and CO_(2)maintaining relatively low deviations.The primary species of UHCs at the combustor outlet under both conditions are small molecular hydrocarbons(C_(3)-C_(8))and RO_(2)radicals,accounting for over 90%of total UHC.Specifically,RO_(2)species(R is C_(1)-C_(2)alkyl groups)are the predominant species,accounting for 74.3%and 82.1%of total RO_(2)under both conditions,respectively.These integrated diagnostic methods for temperature and species concentrations at the combustor outlet serve as a crucial reference for its engineering applications.展开更多
针对高温升、高热负荷燃烧室火焰筒热防护问题,设计了四种切向发散小孔排布方式以改善火焰筒冷却气流分布均匀性,消除局部热斑。建立了应用切向发散冷却技术的单管燃烧室模型,采用流热耦合的方法,对其流场特性和火焰筒壁温进行了数值模...针对高温升、高热负荷燃烧室火焰筒热防护问题,设计了四种切向发散小孔排布方式以改善火焰筒冷却气流分布均匀性,消除局部热斑。建立了应用切向发散冷却技术的单管燃烧室模型,采用流热耦合的方法,对其流场特性和火焰筒壁温进行了数值模拟研究。结果表明,冷却空气比例为18.8%时,燃烧室温升均达到1200 K,四种孔排布方案总压损失约为4.23%,燃烧效率均为99.4%,出口温度分布系数(Overall Temperature Distribution Factor,OTDF)为0.27左右;燃烧室内流场与温度场呈现的周向不均匀性,不利于火焰筒局部冷却;不同均匀孔排布方式,轴向间距相差不大时,周向间距越小越有利于提高冷却性能;非均匀孔排布方案使综合冷却效率最大提升3%以上,较基准方案最高壁温降低79 K,且壁温梯度不大于44 K/cm,完全满足高温升燃烧室对壁温的要求。展开更多
The characteristics of swirler flow field, including cold flow field and combustion flow field, in gas tur- bine combustor with two-stage swirler are studied by using particle image velocimetry （PIV）. Velocity compo...The characteristics of swirler flow field, including cold flow field and combustion flow field, in gas tur- bine combustor with two-stage swirler are studied by using particle image velocimetry （PIV）. Velocity compo- nents, fluctuation velocity, Reynolds stress and recirculation zone length are obtained, respectively. Influences of geometric parameter of primary hole, arrangement of primary hole, inlet air temperature, first-stage swirler an- gle and fuel/air ratio on flow field are investigated, respectively. The experimental results reveal that the primary recirculation zone lengths of combustion flow field are shorter than those of cold flow field, and the primary reeir- culation zone lengths decrease with the increase of inlet air temperature and fuel/air ratio. The change of the geo- metric parameter of primary hole casts an important influence on the swirler flow field in two-stage swirler com- bustor.展开更多
基金support from the National Natural Science Foundation of China(No.12002372)the Young Elite Scientists Sponsorship Program by China Association for Science and Technology(No.2022QNRC001)the Natural Science Foundation of Hunan Province,China(No.2021JJ40674)。
文摘The operational demands of a wide range significantly exacerbate combustion instability issues within ramjet combustor.To suppress combustion oscillations,an open-loop control system utilizing Linear Genetic Programming(LGP)has been developed for a full-scale annular ramjet combustor.The LGP is used to generate control laws that include multi-frequency forcing.These laws are then transformed into square waves to actuate the solenoid valve,which modulates the kerosene supply for open-loop control.The results show that the duty cycle has little effect on instability amplitude,whereas an increase in frequency leads to a remarked reduction in combustion amplitude.After five generations evolvements,the pressure amplitude is reduced by 40.6% under the optimal control law generated by LGP.Furthermore,the machine learning process is depicted using a proximity map of control law similarity,with the search pathway visualized by the steepest descent.All individuals go forward to the upper left corner of the map with the evolution process,terminating at the optimal individual of the fifth generation.
文摘1.Challenges Thermoacoustic instability in combustors arises from the interaction between sound waves and unsteady heat release,commonly found in systems like gas turbines and aeroengines.This instability leads to undesirable consequences such as structural damage and performance deterioration.The challenge lies in predicting and mitigating these instabilities due to the complex interplay of various physical phenomena like acoustic propagation,turbulent flow,and combustion chemistry,which are summarized in detail in Aimee S.Morgans and Dong Yang's published article.
基金support of the National Science and Technology Major Project of China(No.J2019-V-0005-0096)the National Key Research and Development Program of China(No.2020YFA0405700).
文摘The spatiotemporal distribution of soot concentration in aero-engine combustor is important for assessing its combustion performance.Here,we report experimental measurements of soot concentration in terms of Soot Volume Fraction(SVF)and its spatiotemporal distribution in a single-sector dual-swirl aero-engine combustor using Two-Color Laser-Induced Incandescence(2C-LII).It is shown that soot predominantly forms in the symmetrical vortices of the primary combustion zone,exhibiting a V-type distribution with higher concentration in the lower half of the zone than the upper half,with a small amount distributed in the secondary recirculation zone.Soot emissions at the combustor outlet are relatively low under three typical operating conditions by LII experiments,which is aligned with Smoke Number(SN)from gas analysis.The effect of inlet air temperature on SVF distribution and dynamics in the primary combustion zone is studied,which suggests that the SVF level in the primary combustion zone monotonically increases with the temperature.Meanwhile,the SVF distribution becomes more symmetrical as the inlet temperature increases,although the overall SVF level in the lower half of the zone is still higher.We also investigate the influence of the inlet air pressure on the SVF distribution at the combustor outlet.The soot concentration at the combustor outlet increases with inlet pressure,mainly distributed irregularly across both sides and the center.On both sides,the distribution is continuous,while the center exhibits dot-like and linear patterns.Numerical simulations correlated SVF distribution with the flow field in the primary combustion zone,qualitatively explaining the observed SVF distribution behavior.These results under various conditions can provide valuable insights for improving the performance of this specific combustor and designing high-temperature-rise combustors in the future.
基金Supported by the Shanghai Rising Star Program (Grant No. 21QB1403900)the Shanghai Municipal Commission of Science and Technology (Grant No. 22170712600)。
文摘Knowing the optimal operating parameters of Stirling engines is important for efficient combustion through adaptability to changed pressures and oxygen atmospheres. In this study, the optimum operating conditions for efficient combustion in a singular Stirling engine combustor at different oxygen atmospheres were investigated and determined. Numerical simulations were performed to investigate the effects of ejection ratio and pressure on combustion performance. In an oxygen/carbon dioxide atmosphere, the results show that increasing the ejection ratio substantially alters the flame distribution in the Stirling engine combustor, increasing heat transfer and external combustion efficiency. In contrast, increasing the ejection ratio reduces the average and maximum temperatures of the Stirling engine combustor. Increased pressure affects the flame distribution in the Stirling engine combustor and impedes the flow and convective heat transfer in the combustor, reducing the overall external combustion efficiency at pressures above 6.5 MPa. In an air/carbon dioxide atmosphere, an increased ejection ratio reduces the average and maximum temperatures in the Stirling engine combustor. However, the overall flame distribution does not change substantially. The external combustion efficiency tends to increase and then decrease because of two opposing factors: the increase in the convective heat transfer coefficient and the decrease in the temperature difference. Increasing pressure inhibits forced convection heat transfer in the Stirling engine combustor, reducing external combustion efficiency, which drops from 78% to 65% when pressure increases from 0.2 MPa to 0.5 MPa.
基金supported by the National Natural Science Foundation of China(Nos.12272408 and 11925207)the Natural Science Foundation for Distinguished Young Scholars of Hunan Province,China(No.2024J12057)。
文摘A numerical and experimental study was conducted to investigate the Laser Ablation(LA)ignition mode in an ethylene-fueled supersonic combustor with a cavity flameholder.Theexperiments were operated under a Mach number 2.92 supersonic inflow,with stagnation pressureof 2.4 MPa and stagnation temperature of 1600 K.Reynolds-averaged Navier-Stokes simulationswere conducted to characterize the mixing process and flow field structure.This study identifiedfour distinct LA ignition modes.Under the specified condition,laser ablation in zero and negativedefocusing states manifested two distinct ignition modes termed Laser Ablation Direct Ignition(LADI)mode and Laser Ablation Re-Ignition(LARI)mode,correspondingly.LA ignition in alocal small cavity,created by depressing the flow field regulator,could facilitate the ignition modetransforming from LARI mode to Laser Ablation Transition Ignition(LATI)mode.On the otherhand,the elevation of the flow field regulator effectively inhibited the forward propagation of theinitial flame kernel and reduced the dissipation of LA plasma,further enhancing the LADI mode.Based on these characteristics,the LADI mode was subdivided into strong(LADI-S)and weak(LADI-W)modes.Facilitating the transition of ignition modes through alterations in the local flowfield could contribute to attaining a more effective and stable LA ignition.
基金supported by the Equipment Test and Evaluation Technology Research Project,China(No.2100070017)the Natural Science Foundation of Gansu Province,China(No.24JRRA415)。
文摘Precise and quantitative measurement of soot particle emission plays an essential role in accurately assessing the combustion performance of aero-engine combustors and infrared signature levels in aircraft exhausts.Among various intrusive or non-intrusive approaches for soot diagnostics,Laser-Induced Incandescence(LⅡ)technique has been increasingly applied for soot concentration measurement in various combustion environments such as laminar flames and internal combustion engines due to its high spatial resolution and sensitivity.As for LⅡmeasurement in aero-engine combustors,however,it normally suffers from very limited optical accesses and often faces mandatory requirements of oblique imaging from a small backward angle.In this work,we demonstrate a Two-Color(2C)LⅡsystem that simultaneously captures LⅡsignal images at two distinct wavelengths using a Scheimpflug imaging configuration.A projective transformation algorithm and image overlapping procedures were employed to spatially correct the raw Scheimpflug LⅡimages.Performance validation of the developed 2C-Scheimpflug LⅡsystem was first conducted under specified conditions in a laminar C_(2)H_(4)/air McKenna flame.The obtained Soot Volume Fraction(SVF)level and its spatial distribution are in consistent with previous studies under identical flame conditions reported by other research groups.Finally,as a demonstration of engineering benchmark application,we applied the developed 2C-Scheimpflug LⅡsystem to measure SVF distribution in the cross-section plane perpendicular to the direction of flame propagation at the exhaust of a single-sector dual-swirl aero-engine model combustor.Transient soot production events were observed and characteristics of the SVF distribution were investigated.These experimental results suggest the feasibility of the 2C-Scheimpflug LⅡtechnique developed in this work for precise and quantitative measurements of soot concentration in practical environments.
基金supported by the Program of Key Laboratory of Cross-Domain Flight Interdisciplinary Technology,China(No.2023-ZY0205)。
文摘This paper describes an experimental study investigating the effects of sinusoidal pulsed injection on the combustion mode transition in a dual-mode supersonic combustor.The results are obtained under inflow conditions of 2.9 MPa stagnation pressure,1900 K stagnation temperature,and Mach number of 3.0.It has been observed that,at the same equivalence ratio,the combustion mode and flow field structure undergo irreversible changes from a weak combustion state to a strong combustion state at a specific pulsed jet frequency compared to steady jet.For steady jet,the combustion mode is dual-mode.As the frequency of the unsteady jet changes,the combustion mode also changes:it becomes a transition mode at frequencies of 171 Hz and 260 Hz,and a ramjet mode at 216 Hz.Combustion instability under steady jet manifests as a transition in flame stabilization mode.In contrast,under pulsed jet,combustion instability appears either as a transition in flame stabilization mode or as flame blow-off and flashback.The flow field oscillation frequency in the non-reacting flow is 171 Hz,which may resonate with the 171 Hz pulsed jet frequency,making the combustion oscillations most pronounced at this frequency.When the jet frequency is increased to 216 Hz,the combustion intensity significantly increases,and the combustion mode transfers to the ramjet mode.However,further increasing the frequency to 260 Hz results in a decrease in combustion intensity,returning to the transition mode.The frequency of the flow field oscillations varies with the coupling of the pulsed injection frequency,shock wave,and flame,and if the system reaches an unstable state,that is,pre-combustion shock train moves far upstream of the isolator during the pulsed jet period,strong combustion state can be achieved,and this process is irreversible.
基金supported by the National Key Research and Development Program of China(No.2020YFA0405700).
文摘Quantitative measurement of Soot Volume Fraction (SVF) is an essential prerequisite for controlling soot particle emissions from aero-engine combustors. As an in-situ and non-intrusive optical diagnostic technique, Laser-Induced Incandescence (LII) has been increasingly applied for soot concentration quantification in various combustion environments such as laminar flame, vehicle exhaust, internal combustion chamber as well as aero-engine combustor. In this work, we experimentally measured the spatial and temporal distribution of SVF using two-color LII technique at the outlet of a single-sector dual-swirl aero-engine model combustor. The effect of inlet pressure and air preheat temperature on the SVF distribution was separately investigated within a pressure range of 241–425 kPa and a temperature range of 292–500 K. The results show that soot production increases with the inlet pressure but generally decreases with the air preheat temperature. Qualitative analysis was provided to explain the above results of parametric studies. The LII experiments were also conducted under 3 designed conditions to evaluate soot emission under practical operations. Particularly, weak soot emission was detected at the outlet under the idle condition. Our experimental results provide a valuable benchmark for evaluating soot emission in the exhaust plume of this aero-engine combustor during practical operations.
基金support of the National Major Science and Technology Projects of China(No.J2019-V-0005-0096)the National Key Research and Development Program of China(No.2020YFA0405700).
文摘To provide advanced diagnostic techniques for diagnosing the outlet temperature distribution and species concentrations of future advanced combustors,this study focuses on a dual-swirl single-dome rectangular combustor.Through the integration of multiple diagnostics,simultaneous measurement of outlet temperature distribution and species concentrations was achieved.The study validates the engineering applicability of these simultaneous measurements using tungsten-rhenium(W-Re)thermocouples and Coherent Anti-Stokes Raman Scattering(CARS),CARS and Tunable Diode Laser Absorption Spectroscopy(TDLAS),as well as Gas Analysis(GA)and Mass Spectrometry(MS).The results demonstrate that measurements by thermocouples and CARS exhibit good consistency and repeatability,with a relative deviation of less than 4%,fully meeting the requirements of engineering experiments.The spatial distribution reconstruction results of TDLAS can reflect the temperature distribution characteristics at the combustor outlet.Temperature comparison between TDLAS and CARS at single-point positions shows consistent results,with a relative deviation of less than 11%and 7%under both conditions,respectively.Simultaneous measurements by integrating GA and MS show high engineering applicability for the first time,meeting the requirements for measuring both inorganic species and free radicals at the combustor outlet.Under C_(1)condition,the relative deviations of four key species(Unburned Hydrocarbon(UHC),NO,O_(2),and CO_(2))remain within 2%,while that of NO_(2)is slightly higher at approximately 8%.Under C_(2)condition,the overall deviations increase for most species,with only O_(2)and CO_(2)maintaining relatively low deviations.The primary species of UHCs at the combustor outlet under both conditions are small molecular hydrocarbons(C_(3)-C_(8))and RO_(2)radicals,accounting for over 90%of total UHC.Specifically,RO_(2)species(R is C_(1)-C_(2)alkyl groups)are the predominant species,accounting for 74.3%and 82.1%of total RO_(2)under both conditions,respectively.These integrated diagnostic methods for temperature and species concentrations at the combustor outlet serve as a crucial reference for its engineering applications.
文摘针对高温升、高热负荷燃烧室火焰筒热防护问题,设计了四种切向发散小孔排布方式以改善火焰筒冷却气流分布均匀性,消除局部热斑。建立了应用切向发散冷却技术的单管燃烧室模型,采用流热耦合的方法,对其流场特性和火焰筒壁温进行了数值模拟研究。结果表明,冷却空气比例为18.8%时,燃烧室温升均达到1200 K,四种孔排布方案总压损失约为4.23%,燃烧效率均为99.4%,出口温度分布系数(Overall Temperature Distribution Factor,OTDF)为0.27左右;燃烧室内流场与温度场呈现的周向不均匀性,不利于火焰筒局部冷却;不同均匀孔排布方式,轴向间距相差不大时,周向间距越小越有利于提高冷却性能;非均匀孔排布方案使综合冷却效率最大提升3%以上,较基准方案最高壁温降低79 K,且壁温梯度不大于44 K/cm,完全满足高温升燃烧室对壁温的要求。
基金Supported by the National Natural Science Foundation of China(50906040)the Nanjing University of Aeronautics and Astronautics Research Funding(NZ2012107,NS2010052)~~
文摘The characteristics of swirler flow field, including cold flow field and combustion flow field, in gas tur- bine combustor with two-stage swirler are studied by using particle image velocimetry （PIV）. Velocity compo- nents, fluctuation velocity, Reynolds stress and recirculation zone length are obtained, respectively. Influences of geometric parameter of primary hole, arrangement of primary hole, inlet air temperature, first-stage swirler an- gle and fuel/air ratio on flow field are investigated, respectively. The experimental results reveal that the primary recirculation zone lengths of combustion flow field are shorter than those of cold flow field, and the primary reeir- culation zone lengths decrease with the increase of inlet air temperature and fuel/air ratio. The change of the geo- metric parameter of primary hole casts an important influence on the swirler flow field in two-stage swirler com- bustor.
