Rechargeable zinc-ion batteries have emerged as one of the most promising candidates for large-scale energy storage applications due to their high safety and low cost.However,the use of Zn metal in batteries suffers f...Rechargeable zinc-ion batteries have emerged as one of the most promising candidates for large-scale energy storage applications due to their high safety and low cost.However,the use of Zn metal in batteries suffers from many severe issues,including dendrite growth and parasitic reactions,which often lead to short cycle lives.Herein,we propose the construction of functional organic interfacial layers(OIL)on the Zn metal anodes to address these challenges.Through a well-designed organic-assist pre-construction process,a densely packed artificial layer featuring the immobilized zwitterionic molecular brush can be constructed,which can not only efficiently facilitate the smooth Zn plating and stripping,but also introduce a stable environment for battery reactions.Through density functional theory calculations and experimental characterizations,we verify that the immobilized organic propane sulfonate on Zn anodes can significantly lower the energy barrier and increase the kinetics of Zn^(2+)transport.Thus,the Zn metal anode with the functional OIL can significantly improve the cycle life of the symmetric cell to over 3500 h stable operation.When paired with the H_(2)V_(3)O_(8)cathode,the aqueous Zn-ion full cells can be continuously cycled over 7000 cycles,marking an important milestone for Zn anode development for potential industrial applications.展开更多
Vanadium redox flow batteries(VRFBs)hold significant promise for large-scale energy storage applications.However,the sluggish reaction kinetics on the electrode surface considerably limit their performance.Implementat...Vanadium redox flow batteries(VRFBs)hold significant promise for large-scale energy storage applications.However,the sluggish reaction kinetics on the electrode surface considerably limit their performance.Implementation of efficient surface modification on carbon electrodes through an economically viable production method is crucial for the practical application of VRFBs.Herein,a nano-carbon layer with morphology of fine nanoparticles(<90 nm)and rich oxygen functional groups was constructed on carbon felts by unbalanced magnetron sputtering coupled with thermal treatment.This modified carbon felt served as both anode and cathode in cell,enabling an improved wettability of electrolyte and high reversibility of the active mass,and promoted kinetics of redox reactions.The optimized carbon felt,achieved through one hour of deposition(1C-CF),demonstrated outstanding electrochemical performance in a single cell.The cell exhibited a high energy efficiency of 82.4%at a current density of 100 m A cm^(-2)and maintained 71.8%at a high current density of 250 mA cm^(-2).Furthermore,the energy efficiency remained at 77.2%during long-term cycling(450 cycles)at a current density of 150 mA cm^(-2),indicating good electrode stability.Our results shed light on the surface design of carbon felt electrodes for the broad application interest of VRFB energy storage systems.展开更多
Solid polymer electrolyte(SPE) shows great potential for all-solid-state batteries because of the inherent safety and flexibility;however, the unfavourable Li+deposition and large thickness hamper its development and ...Solid polymer electrolyte(SPE) shows great potential for all-solid-state batteries because of the inherent safety and flexibility;however, the unfavourable Li+deposition and large thickness hamper its development and application. Herein, a laminar MXene functional layer-thin SPE layer-cathode integration(MXene-PEO-LFP) is designed and fabricated. The MXene functional layer formed by stacking rigid MXene nanosheets imparts higher compressive strength relative to PEO electrolyte layer. And the abundant negatively-charged groups on MXene functional layer effectively repel anions and attract cations to adjust the charge distribution behavior at electrolyte–anode interface. Furthermore,the functional layer with rich lithiophilic groups and outstanding electronic conductivity results in low Li nucleation overpotential and nucleation energy barrier. In consequence, the cell assembled with MXene-PEO-LFP, where the PEO electrolyte layer is only 12 μm, much thinner than most solid electrolytes, exhibits uniform, dendrite-free Li+deposition and excellent cycling stability. High capacity(142.8 mAh g-1), stable operation of 140 cycles(capacity decay per cycle, 0.065%), and low polarization potential(0.5 C) are obtained in this Li|MXene-PEO-LFP cell,which is superior to most PEO-based electrolytes under identical condition. This integrated design may provide a strategy for the large-scale application of thin polymer electrolytes in all-solid-state battery.展开更多
In this review, we highlight the recent development of organic π-functional materials as buffer layers in constructing efficient perovskite solar cells（PVSCs）. By following a brief introduction on the PVSC developm...In this review, we highlight the recent development of organic π-functional materials as buffer layers in constructing efficient perovskite solar cells（PVSCs）. By following a brief introduction on the PVSC development, device architecture and material design features, we exemplified the exciting progresses made in field by exploiting organic π-functional materials based hole and electron transport layers（HTLs and ETLs） to enable high-performance PVSCs.展开更多
A class of singularly perturbed semi-linear boundary value problems with discontinuous functions is examined in this article. Using the boundary layer function method, the asymptotic solution of such a problem is give...A class of singularly perturbed semi-linear boundary value problems with discontinuous functions is examined in this article. Using the boundary layer function method, the asymptotic solution of such a problem is given and shown to be uniformly effective. The existence and uniqueness of the solution for the system is also proved. Numerical result is presented as an illustration to the theoretical result.展开更多
Protonic ceramic fuel cells(PCFCs)have been attracting increasing attention because of their advances in high-efficiency power generation in an intermediate-temperature range,as compared to the high-temperature solid ...Protonic ceramic fuel cells(PCFCs)have been attracting increasing attention because of their advances in high-efficiency power generation in an intermediate-temperature range,as compared to the high-temperature solid oxide fuel cells(SOFCs).The greatest difference between PCFCs and SOFCs is the specific requirement of protonic(H+)conductivity at the PCFC cathode,in addition to the electronic(e^(-))and oxide-ion(O^(2-))conductivity.The development of a triple H^(+)/e^(-)/O^(2-)conductor for PCFC cathode is still challenging.Thus,the most-widely used cathode material is based on the mature e^(-)/O^(2-)conductor.However,this leads to insufficient triple phase boundary(TPB),i.e.,reaction area.Herein,an efficient strategy that uses a~100 nm-thick proton conductive functional layer(La_(0.5)Sr_(0.5)CoO_(3-δ),LSC55)in-between the typical La_(0.8)Sr_(0.2)CoO_(3-δ)cathode(a mature e-/O^(2-)conductor,LS C 82)and B aZr_(0.4)Ce_(0.4)Y_(0.1)Yb_(0.)1O_(3-δ)elec trolyte(11 mm in diameter,20μm in thickness)is proposed to significantly enhance the reaction area.Reasonably,the ohmic resistance and polarization resistance are both decreased by 47%and 62%,respectively,compared with that of PCFCs without the functional layer.The power density of the PCFC with such a functional layer can be raised by up to 2.24 times,superior to those described in previous reports.The enhanced PCFC performances are attributed to the well-built TPB and enhanced reaction area via the functional layer engineering strategy.展开更多
The formation of inorganic-organic hybrids(IOH)on the metallic substrates would play a decisive role in improving their structural and functional features.In this work,the growth of organic coating(OC)consisting of co...The formation of inorganic-organic hybrids(IOH)on the metallic substrates would play a decisive role in improving their structural and functional features.In this work,the growth of organic coating(OC)consisting of coumarin-3-carboxylic acid(3-CCA)and albumin(ALB)on the inorganic layer(IC),produced by plasma electrolysis of AZ31 Mg alloy,led to enabling organically synergistic reactions on the porous inorganic surface,forming a flake-like structure sealing the structural defects of IC.Synergistic actions between OC and IC endow the flake-like structures with chemical protection and photocatalytic performance.Upon contact with a corrosive solution,the IOH layer possesses stable morphologies that delay the corrosive degradation of the whole structure.The electrochemical stability of the sample produced by immersion IC in the organic solution for 10 h(IOH2 sample)was superior to the other samples as it had the lowest corrosion current density(1.69×10^(−10)A·cm^(−2))and the highest top layer resistance(1.2×10^(7)Ω·cm^(2)).Moreover,the IOH layer can photodegrade the organic pollutants in model wastewater,where the highest photocatalytic efficiency of 99.47%was found in the IOH2 sample.Furthermore,computational calculations were performed to assess the relative activity of different parts of the ALB and 3-CCA structures,which provide helpful information into the formation mechanism of the IOH materials.展开更多
We propose a simple one-dimensional grating coupling system that can excite multiple surface plasmon resonances for refractive index(RI)sensing with self-reference characteristics in the near-infrared band.Using theor...We propose a simple one-dimensional grating coupling system that can excite multiple surface plasmon resonances for refractive index(RI)sensing with self-reference characteristics in the near-infrared band.Using theoretical analysis and the finite-difference time-domain method,the plasmonic mechanism of the structure is discussed in detail.The results show that the excited resonances are independent of each other and have different fields of action.The mode involving extensive interaction with the analyte environment achieves a high sensitivity of 1236 nm/RIU,and the figure of merit(FOM)can reach 145 RIU-1.Importantly,the mode that is insensitive to the analyte environment exhibits good self-reference characteristics.Moreover,we discuss the case of exchanging the substrate material with the analyte environment.Promising simulation results show that this RI sensor can be widely deployed in unstable and complicated environments.展开更多
The paper addresses a contact problem of the theory of elasticity,i.e.,the penetration of a circular indenter with a flat base into a soft functionally graded elastic layer.The elastic properties of a functionally gra...The paper addresses a contact problem of the theory of elasticity,i.e.,the penetration of a circular indenter with a flat base into a soft functionally graded elastic layer.The elastic properties of a functionally graded layer arbitrarily vary with depth,and the foundation is assumed to be elastic,yet much harder than a layer.Approximated analytical solution is constructed,and it is shown that the solutions are asymptotically exact both for large and small values of characteristic dimensionless geometrical parameter of the problem.Numerical examples are analyzed for the cases of monotonic and nonmonotonic variations of elastic properties.Numerical results for the case of homogeneous layer are compared with the results for nondeformable foundation.展开更多
Recently, pH-sensitive hydrogels have been utilized in the diverse applications including sensors, switches, and actuators. In order to have continuous stress and deformation ?elds, a new semi-analytical approach is d...Recently, pH-sensitive hydrogels have been utilized in the diverse applications including sensors, switches, and actuators. In order to have continuous stress and deformation ?elds, a new semi-analytical approach is developed to predict the swelling induced?nite bending for a functionally graded(FG) layer composed of a pH-sensitive hydrogel,in which the cross-link density is continuously distributed along the thickness direction under the plane strain condition. Without considering the intermediary virtual reference,the initial state is mapped into the deformed con?guration in a circular shape by utilizing a total deformation gradient tensor stemming from the inhomogeneous swelling of an FG layer in response to the variation of the pH value of the solvent. To enlighten the capability of the presented analytical method, the ?nite element method(FEM) is used to verify the accuracy of the analytical results in some case studies. The perfect agreement con-?rms the accuracy of the presented method. Due to the applicability of FG pH-sensitive hydrogels, some design factors such as the semi-angle, the bending curvature, the aspect ratio, and the distributions of deformation and stress ?elds are studied. Furthermore, the tangential free-stress axes are illustrated in deformed con?guration.展开更多
1 Introduction Magnesium salts are very important by-product of salt lake industry in West China.Nearly 200 million cubic meters of waste brine are released to the environment
This paper explores the adaptive iterative learning control method in the control of fractional order systems for the first time. An adaptive iterative learning control(AILC) scheme is presented for a class of commens...This paper explores the adaptive iterative learning control method in the control of fractional order systems for the first time. An adaptive iterative learning control(AILC) scheme is presented for a class of commensurate high-order uncertain nonlinear fractional order systems in the presence of disturbance.To facilitate the controller design, a sliding mode surface of tracking errors is designed by using sufficient conditions of linear fractional order systems. To relax the assumption of the identical initial condition in iterative learning control(ILC), a new boundary layer function is proposed by employing MittagLeffler function. The uncertainty in the system is compensated for by utilizing radial basis function neural network. Fractional order differential type updating laws and difference type learning law are designed to estimate unknown constant parameters and time-varying parameter, respectively. The hyperbolic tangent function and a convergent series sequence are used to design robust control term for neural network approximation error and bounded disturbance, simultaneously guaranteeing the learning convergence along iteration. The system output is proved to converge to a small neighborhood of the desired trajectory by constructing Lyapnov-like composite energy function(CEF)containing new integral type Lyapunov function, while keeping all the closed-loop signals bounded. Finally, a simulation example is presented to verify the effectiveness of the proposed approach.展开更多
AIM：To evaluate the structural injure patterns in peripapillary retinal fiber layer （pRNFL）, retinal ganglion cell layer （RGCL） and their correlations to visual function in various mitochondrial optic neuropathi...AIM：To evaluate the structural injure patterns in peripapillary retinal fiber layer （pRNFL）, retinal ganglion cell layer （RGCL） and their correlations to visual function in various mitochondrial optic neuropathies （MON） to offer help to their differential diagnosis.METHODS：Totally 32 MON patients （60 eyes） were recruited within 6mo after clinical onsets, including 20 Leber hereditary optic neuropathy （LHON） patients （37eyes）, 12 ethambutol-induced optic neuropathy （EON）patients （23 eyes）, and 41 age-gender matched healthy controls （HC, 82 eyes）. All subjects had pRNFL and RGCL examinations with optic coherence tomography （OCT） and visual function tests.RESULTS：In the early stages of MON, the temporal pRNFL thickness decreased （66.09±22.57μm）, but increased in other quadrants, compared to HC （76.95±14.81μm）. The other quadrants remaining stable for LHON and EON patients besides the second hour sector of pRNFL thickness reduced and the temporal pRNFL decreased （56.78±15.87μm） for EON. Total macular thickness in MON reduced remarkably（279.25±18.90μm; P=0.015）, which mainly occurring in the inner circle （3 mm diameter of circle） and the nasal temporal sectors in the outer circle （5.5 mm diameter of circle）, in contrast to those in HC. RGCL thickness reduced in each sector of the macula （61.90±8.73μm; P≤0.001）. It strongly showed the correlationship of best corrected visual acuity （R=0.50, P=0.0003） and visual field injury （R=0.54,P=0.0002） in MON patients.CONCLUSION：OCT is a potential tool for detecting structural alterations in the optic nerves of various MON. Different types of MON may have different damage patterns.展开更多
ZnTi-layered double hydroxides（LDHs） with varying Zn/Ti ratio have been synthesized by coprecipitation of zinc and titanium salts from homogeneous solution.The obtained ZnTi-LDHs possess high crystallinity and hiera...ZnTi-layered double hydroxides（LDHs） with varying Zn/Ti ratio have been synthesized by coprecipitation of zinc and titanium salts from homogeneous solution.The obtained ZnTi-LDHs possess high crystallinity and hierarchical structure with improved UV-absorbance property.The UV-vis spectra show that the UV absorbing properties of ZnTi-LDHs is stronger and broader than both MgAl-LDH and ZnAl-LDH due to the existence of Ti.Moreover,the UV absorption property increased with the content of Ti,which can be ascribed to the decrease in the band gap energy,as clearly confirmed by density functional theory calculations.When irradiated by UV rays,the property of the samples with generated free radicals（OH^·and O2^·） was evaluated by means of electron spin resonance（EPR）.ZnTi-LDHs generated a relatively lower active radicals in contrast with TiO2 and ZnO,which implied an increased safety used as sunscreens.Therefore,this work provides a detailed understanding of UV shielding properties of ZnTiLDHs which was unrevealed previously,and demonstrates the expansive application prospects of ZnTiLDHs in the field of sunscreens.展开更多
Aqueous Zn metal batteries have become competitive electrochemical energy storage systems owing to their material abundance,low cost,high capacity,and nontoxicity.Nevertheless,the notorious Zn dendrites and poor anode...Aqueous Zn metal batteries have become competitive electrochemical energy storage systems owing to their material abundance,low cost,high capacity,and nontoxicity.Nevertheless,the notorious Zn dendrites and poor anode reversibility caused by the insulating by-products and“dead Zn”are still formidable challenges for their practical application.Herein,an SnS-based layer coated on the Zn anode is reported to tackle these problems.The semiconducting SnS with a higher work function can drive the electrons from the Zn anode,which constructs a polarized interface between the SnS layer and Zn.The semiconducting importance of the coating layer is verified through theoretical simulations,which can migrate the polarization layer from the electrode surface to a wellprotected spot beneath the coating layer.This polarization interface is effective in homogenizing the Zn^(2+)flux and repelling the anions from electrochemical corrosion.Compared with the bare Zn,the SnS-coated Zn anode exhibits a notable 14.7-fold enhancement in plating/stripping lifetime(over 3000 h),high reversibility(with CE of 99.74%),and superior stability in full cells when paired with vanadium-and manganese-based cathodes.展开更多
In this paper, a kind of singularly perturbed first-order differential equations with integral boundary condition are considered. With the method of boundary layer function and the Banach fixed-point theorem, the unif...In this paper, a kind of singularly perturbed first-order differential equations with integral boundary condition are considered. With the method of boundary layer function and the Banach fixed-point theorem, the uniformly valid asymptotic solution of the original problem is obtained.展开更多
We propose a simple one-dimensional grating coupling system that can excite multiple surface plasmon resonances for refractive index(RI)sensing with self-reference characteristics in the near-infrared band.Using theor...We propose a simple one-dimensional grating coupling system that can excite multiple surface plasmon resonances for refractive index(RI)sensing with self-reference characteristics in the near-infrared band.Using theoretical analysis and the finite-difference time-domain method,the plasmonic mechanism of the structure is discussed in detail.The results show that the excited resonances are independent of each other and have different fields of action.The mode involving extensive interaction with the analyte environment achieves a high sensitivity of 1236 nm/RIU,and the figure of merit(FOM)can reach 145 RIU-1.Importantly,the mode that is insensitive to the analyte environment exhibits good self-reference characteristics.Moreover,we discuss the case of exchanging the substrate material with the analyte environment.Promising simulation results show that this RI sensor can be widely deployed in unstable and complicated environments.展开更多
Motivated by the autopilot of an unmanned aerial vehicle（UAV） with a wide flight envelope span experiencing large parametric variations in the presence of uncertainties, a fuzzy adaptive tracking controller（FATC） ...Motivated by the autopilot of an unmanned aerial vehicle（UAV） with a wide flight envelope span experiencing large parametric variations in the presence of uncertainties, a fuzzy adaptive tracking controller（FATC） is proposed. The controller consists of a fuzzy baseline controller and an adaptive increment, and the main highlight is that the fuzzy baseline controller and adaptation laws are both based on the fuzzy multiple Lyapunov function approach, which helps to reduce the conservatism for the large envelope and guarantees satisfactory tracking performances with strong robustness simultaneously within the whole envelope. The constraint condition of the fuzzy baseline controller is provided in the form of linear matrix inequality（LMI）, and it specifies the satisfactory tracking performances in the absence of uncertainties. The adaptive increment ensures the uniformly ultimately bounded（UUB） predication errors to recover satisfactory responses in the presence of uncertainties. Simulation results show that the proposed controller helps to achieve high-accuracy tracking of airspeed and altitude desirable commands with strong robustness to uncertainties throughout the entire flight envelope.展开更多
In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs ...In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs and AFM roughness profiles of treated samples and the contrast groups were obtained.Besides,XPS survey spectrums and high resolution spectrums were also investigated.The adhesion test revealed that ion bombardment could improve the adhesion to the polyurethane coating substrate.A better etching result of oxygen ions versus nitrogen predicts a higher bonding strength of zirconium coating on polyurethane and,indeed,the highest bonding strengths are for oxygen ion bombardment upto 13.3 MPa.As demonstrated in X-ray photoelectron spectroscopy,the oxygen ion also helps to introduce more active groups,and,therefore,it achieves a high value of adhesion strength.展开更多
A cylindrical system of vector functions, the stiffness matrix method and the corresponding recursive algorithm are proposed to investigate the static response of transversely isotropic,layered magneto-electro-elastic...A cylindrical system of vector functions, the stiffness matrix method and the corresponding recursive algorithm are proposed to investigate the static response of transversely isotropic,layered magneto-electro-elastic（MEE） structures over a homogeneous half-space substrate subjected to circular surface loading. In terms of the system of vector functions, we expand the extended displacements and stresses, and deduce two sets of ordinary differential equations, which are related to the expansion coeficients. The solution to one of the two sets of these ordinary differential equations can be evaluated by using the stiffness matrix method and the corresponding recursive algorithm. These expansion coeficients are then integrated by adaptive Gaussian quadrature to obtain the displacements and stresses in the physical domain. Two types of surface loads, mechanical pressure and electric loading,are considered in the numerical examples. The calculated results show that the proposed technique is stable and effective in analyzing the layered half-space MEE structures under surface loading.展开更多
基金supported by the Australian Research Council (FT180100705, DP230101579, DE240100868)CSIRO “International Hydrogen Research Collaboration ProgramRESEARCH FELLOWSHIPS”+2 种基金the National Natural Science Foundation of China (22209103)support from the “Joint International Laboratory on Environmental and Energy Frontier Materials”the “Innovation Research Team of High-Level Local Universities in Shanghai”
文摘Rechargeable zinc-ion batteries have emerged as one of the most promising candidates for large-scale energy storage applications due to their high safety and low cost.However,the use of Zn metal in batteries suffers from many severe issues,including dendrite growth and parasitic reactions,which often lead to short cycle lives.Herein,we propose the construction of functional organic interfacial layers(OIL)on the Zn metal anodes to address these challenges.Through a well-designed organic-assist pre-construction process,a densely packed artificial layer featuring the immobilized zwitterionic molecular brush can be constructed,which can not only efficiently facilitate the smooth Zn plating and stripping,but also introduce a stable environment for battery reactions.Through density functional theory calculations and experimental characterizations,we verify that the immobilized organic propane sulfonate on Zn anodes can significantly lower the energy barrier and increase the kinetics of Zn^(2+)transport.Thus,the Zn metal anode with the functional OIL can significantly improve the cycle life of the symmetric cell to over 3500 h stable operation.When paired with the H_(2)V_(3)O_(8)cathode,the aqueous Zn-ion full cells can be continuously cycled over 7000 cycles,marking an important milestone for Zn anode development for potential industrial applications.
基金supported by National Natural Science Foundation of China(U21B2057)。
文摘Vanadium redox flow batteries(VRFBs)hold significant promise for large-scale energy storage applications.However,the sluggish reaction kinetics on the electrode surface considerably limit their performance.Implementation of efficient surface modification on carbon electrodes through an economically viable production method is crucial for the practical application of VRFBs.Herein,a nano-carbon layer with morphology of fine nanoparticles(<90 nm)and rich oxygen functional groups was constructed on carbon felts by unbalanced magnetron sputtering coupled with thermal treatment.This modified carbon felt served as both anode and cathode in cell,enabling an improved wettability of electrolyte and high reversibility of the active mass,and promoted kinetics of redox reactions.The optimized carbon felt,achieved through one hour of deposition(1C-CF),demonstrated outstanding electrochemical performance in a single cell.The cell exhibited a high energy efficiency of 82.4%at a current density of 100 m A cm^(-2)and maintained 71.8%at a high current density of 250 mA cm^(-2).Furthermore,the energy efficiency remained at 77.2%during long-term cycling(450 cycles)at a current density of 150 mA cm^(-2),indicating good electrode stability.Our results shed light on the surface design of carbon felt electrodes for the broad application interest of VRFB energy storage systems.
基金This work is supported by National Natural Science Founda-tion of China(U2004199)National Key Research and Devel-opment Program of China(2018YFD0200606)+1 种基金China Postdoctoral Science Foundation(2021T140615),Natural Sci-enceFoundationofHenanProvince(212300410285)Young Talent Support Project of Henan Province(2021HYTP028).
文摘Solid polymer electrolyte(SPE) shows great potential for all-solid-state batteries because of the inherent safety and flexibility;however, the unfavourable Li+deposition and large thickness hamper its development and application. Herein, a laminar MXene functional layer-thin SPE layer-cathode integration(MXene-PEO-LFP) is designed and fabricated. The MXene functional layer formed by stacking rigid MXene nanosheets imparts higher compressive strength relative to PEO electrolyte layer. And the abundant negatively-charged groups on MXene functional layer effectively repel anions and attract cations to adjust the charge distribution behavior at electrolyte–anode interface. Furthermore,the functional layer with rich lithiophilic groups and outstanding electronic conductivity results in low Li nucleation overpotential and nucleation energy barrier. In consequence, the cell assembled with MXene-PEO-LFP, where the PEO electrolyte layer is only 12 μm, much thinner than most solid electrolytes, exhibits uniform, dendrite-free Li+deposition and excellent cycling stability. High capacity(142.8 mAh g-1), stable operation of 140 cycles(capacity decay per cycle, 0.065%), and low polarization potential(0.5 C) are obtained in this Li|MXene-PEO-LFP cell,which is superior to most PEO-based electrolytes under identical condition. This integrated design may provide a strategy for the large-scale application of thin polymer electrolytes in all-solid-state battery.
基金financial support from the 973 program(No.2014CB643503)the National Natural Science Foundation of China(No.21474088)+2 种基金financial support from NSFC(No.21674093)the National 1000 Young Talents Program hosted by China100 Talents Program by Zhejiang University
文摘In this review, we highlight the recent development of organic π-functional materials as buffer layers in constructing efficient perovskite solar cells（PVSCs）. By following a brief introduction on the PVSC development, device architecture and material design features, we exemplified the exciting progresses made in field by exploiting organic π-functional materials based hole and electron transport layers（HTLs and ETLs） to enable high-performance PVSCs.
基金Supported by National Natural Science Foundation of China(11071075, 11171113)National Natural Science Foundation of China-subsidized by CAS Knowledge Innovation Project (30921064,90820307)+1 种基金Shang Natural Science Foundation(10ZR1409200)Division of Computational Science,E-institute of Shanghai Jiaotong University(E03004)
文摘A class of singularly perturbed semi-linear boundary value problems with discontinuous functions is examined in this article. Using the boundary layer function method, the asymptotic solution of such a problem is given and shown to be uniformly effective. The existence and uniqueness of the solution for the system is also proved. Numerical result is presented as an illustration to the theoretical result.
基金financially supported by China Post-doctoral Science Foundation(No.2022M710856)Guangzhou Postdoctoral Research Project(No.62104380)+2 种基金the Outstanding Youth Project of Natural Science Foundation of Guangdong Province(No.2022B1515020020)the Funding by Science and Technology Projects in Guangzhou(Nos.202206050003 and 202201010603)Guangdong Engineering Technology Research Center for Hydrogen Energy and Fuel Cells。
文摘Protonic ceramic fuel cells(PCFCs)have been attracting increasing attention because of their advances in high-efficiency power generation in an intermediate-temperature range,as compared to the high-temperature solid oxide fuel cells(SOFCs).The greatest difference between PCFCs and SOFCs is the specific requirement of protonic(H+)conductivity at the PCFC cathode,in addition to the electronic(e^(-))and oxide-ion(O^(2-))conductivity.The development of a triple H^(+)/e^(-)/O^(2-)conductor for PCFC cathode is still challenging.Thus,the most-widely used cathode material is based on the mature e^(-)/O^(2-)conductor.However,this leads to insufficient triple phase boundary(TPB),i.e.,reaction area.Herein,an efficient strategy that uses a~100 nm-thick proton conductive functional layer(La_(0.5)Sr_(0.5)CoO_(3-δ),LSC55)in-between the typical La_(0.8)Sr_(0.2)CoO_(3-δ)cathode(a mature e-/O^(2-)conductor,LS C 82)and B aZr_(0.4)Ce_(0.4)Y_(0.1)Yb_(0.)1O_(3-δ)elec trolyte(11 mm in diameter,20μm in thickness)is proposed to significantly enhance the reaction area.Reasonably,the ohmic resistance and polarization resistance are both decreased by 47%and 62%,respectively,compared with that of PCFCs without the functional layer.The power density of the PCFC with such a functional layer can be raised by up to 2.24 times,superior to those described in previous reports.The enhanced PCFC performances are attributed to the well-built TPB and enhanced reaction area via the functional layer engineering strategy.
基金supported by the National Research Foundation of Korea(NRF)funded by the Korean Government(MSIT)(No.2022R1A2C1006743).
文摘The formation of inorganic-organic hybrids(IOH)on the metallic substrates would play a decisive role in improving their structural and functional features.In this work,the growth of organic coating(OC)consisting of coumarin-3-carboxylic acid(3-CCA)and albumin(ALB)on the inorganic layer(IC),produced by plasma electrolysis of AZ31 Mg alloy,led to enabling organically synergistic reactions on the porous inorganic surface,forming a flake-like structure sealing the structural defects of IC.Synergistic actions between OC and IC endow the flake-like structures with chemical protection and photocatalytic performance.Upon contact with a corrosive solution,the IOH layer possesses stable morphologies that delay the corrosive degradation of the whole structure.The electrochemical stability of the sample produced by immersion IC in the organic solution for 10 h(IOH2 sample)was superior to the other samples as it had the lowest corrosion current density(1.69×10^(−10)A·cm^(−2))and the highest top layer resistance(1.2×10^(7)Ω·cm^(2)).Moreover,the IOH layer can photodegrade the organic pollutants in model wastewater,where the highest photocatalytic efficiency of 99.47%was found in the IOH2 sample.Furthermore,computational calculations were performed to assess the relative activity of different parts of the ALB and 3-CCA structures,which provide helpful information into the formation mechanism of the IOH materials.
基金the National Natural Science Foundation of China(Grant No.61865008).
文摘We propose a simple one-dimensional grating coupling system that can excite multiple surface plasmon resonances for refractive index(RI)sensing with self-reference characteristics in the near-infrared band.Using theoretical analysis and the finite-difference time-domain method,the plasmonic mechanism of the structure is discussed in detail.The results show that the excited resonances are independent of each other and have different fields of action.The mode involving extensive interaction with the analyte environment achieves a high sensitivity of 1236 nm/RIU,and the figure of merit(FOM)can reach 145 RIU-1.Importantly,the mode that is insensitive to the analyte environment exhibits good self-reference characteristics.Moreover,we discuss the case of exchanging the substrate material with the analyte environment.Promising simulation results show that this RI sensor can be widely deployed in unstable and complicated environments.
基金supports of the Ministry of Education and Science of Russia (11.519.11.3028,14.B37.21.1131,14.B7.21.1632)Russian Foundation of Basic Research (11-08-91168-GFEN a)
文摘The paper addresses a contact problem of the theory of elasticity,i.e.,the penetration of a circular indenter with a flat base into a soft functionally graded elastic layer.The elastic properties of a functionally graded layer arbitrarily vary with depth,and the foundation is assumed to be elastic,yet much harder than a layer.Approximated analytical solution is constructed,and it is shown that the solutions are asymptotically exact both for large and small values of characteristic dimensionless geometrical parameter of the problem.Numerical examples are analyzed for the cases of monotonic and nonmonotonic variations of elastic properties.Numerical results for the case of homogeneous layer are compared with the results for nondeformable foundation.
文摘Recently, pH-sensitive hydrogels have been utilized in the diverse applications including sensors, switches, and actuators. In order to have continuous stress and deformation ?elds, a new semi-analytical approach is developed to predict the swelling induced?nite bending for a functionally graded(FG) layer composed of a pH-sensitive hydrogel,in which the cross-link density is continuously distributed along the thickness direction under the plane strain condition. Without considering the intermediary virtual reference,the initial state is mapped into the deformed con?guration in a circular shape by utilizing a total deformation gradient tensor stemming from the inhomogeneous swelling of an FG layer in response to the variation of the pH value of the solvent. To enlighten the capability of the presented analytical method, the ?nite element method(FEM) is used to verify the accuracy of the analytical results in some case studies. The perfect agreement con-?rms the accuracy of the presented method. Due to the applicability of FG pH-sensitive hydrogels, some design factors such as the semi-angle, the bending curvature, the aspect ratio, and the distributions of deformation and stress ?elds are studied. Furthermore, the tangential free-stress axes are illustrated in deformed con?guration.
基金supported by the National Natural Science Foundationthe National Key Technologies R&D Program (2011BAE28B01)the 863 Program (2013AA032501)
文摘1 Introduction Magnesium salts are very important by-product of salt lake industry in West China.Nearly 200 million cubic meters of waste brine are released to the environment
基金supported by the National Natural Science Foundation of China(60674090)Shandong Natural Science Foundation(ZR2017QF016)
文摘This paper explores the adaptive iterative learning control method in the control of fractional order systems for the first time. An adaptive iterative learning control(AILC) scheme is presented for a class of commensurate high-order uncertain nonlinear fractional order systems in the presence of disturbance.To facilitate the controller design, a sliding mode surface of tracking errors is designed by using sufficient conditions of linear fractional order systems. To relax the assumption of the identical initial condition in iterative learning control(ILC), a new boundary layer function is proposed by employing MittagLeffler function. The uncertainty in the system is compensated for by utilizing radial basis function neural network. Fractional order differential type updating laws and difference type learning law are designed to estimate unknown constant parameters and time-varying parameter, respectively. The hyperbolic tangent function and a convergent series sequence are used to design robust control term for neural network approximation error and bounded disturbance, simultaneously guaranteeing the learning convergence along iteration. The system output is proved to converge to a small neighborhood of the desired trajectory by constructing Lyapnov-like composite energy function(CEF)containing new integral type Lyapunov function, while keeping all the closed-loop signals bounded. Finally, a simulation example is presented to verify the effectiveness of the proposed approach.
基金Supported by the National High Technology Research and Development Program of China(863 Program,No.2015AA020511)
文摘AIM：To evaluate the structural injure patterns in peripapillary retinal fiber layer （pRNFL）, retinal ganglion cell layer （RGCL） and their correlations to visual function in various mitochondrial optic neuropathies （MON） to offer help to their differential diagnosis.METHODS：Totally 32 MON patients （60 eyes） were recruited within 6mo after clinical onsets, including 20 Leber hereditary optic neuropathy （LHON） patients （37eyes）, 12 ethambutol-induced optic neuropathy （EON）patients （23 eyes）, and 41 age-gender matched healthy controls （HC, 82 eyes）. All subjects had pRNFL and RGCL examinations with optic coherence tomography （OCT） and visual function tests.RESULTS：In the early stages of MON, the temporal pRNFL thickness decreased （66.09±22.57μm）, but increased in other quadrants, compared to HC （76.95±14.81μm）. The other quadrants remaining stable for LHON and EON patients besides the second hour sector of pRNFL thickness reduced and the temporal pRNFL decreased （56.78±15.87μm） for EON. Total macular thickness in MON reduced remarkably（279.25±18.90μm; P=0.015）, which mainly occurring in the inner circle （3 mm diameter of circle） and the nasal temporal sectors in the outer circle （5.5 mm diameter of circle）, in contrast to those in HC. RGCL thickness reduced in each sector of the macula （61.90±8.73μm; P≤0.001）. It strongly showed the correlationship of best corrected visual acuity （R=0.50, P=0.0003） and visual field injury （R=0.54,P=0.0002） in MON patients.CONCLUSION：OCT is a potential tool for detecting structural alterations in the optic nerves of various MON. Different types of MON may have different damage patterns.
基金supported by the National Natural Science Foundation of China (No. 21301012)the Development of High-Caliber Talents Project of Beijing Municipal Institutions (No. CIT & TCD 201504009)+1 种基金China Cosmetic Collaborative Innovation Center, BTBUthe Open Research Fund Program of Beijing Key Lab of Plant Resource Research and Development, BTBU
文摘ZnTi-layered double hydroxides（LDHs） with varying Zn/Ti ratio have been synthesized by coprecipitation of zinc and titanium salts from homogeneous solution.The obtained ZnTi-LDHs possess high crystallinity and hierarchical structure with improved UV-absorbance property.The UV-vis spectra show that the UV absorbing properties of ZnTi-LDHs is stronger and broader than both MgAl-LDH and ZnAl-LDH due to the existence of Ti.Moreover,the UV absorption property increased with the content of Ti,which can be ascribed to the decrease in the band gap energy,as clearly confirmed by density functional theory calculations.When irradiated by UV rays,the property of the samples with generated free radicals（OH^·and O2^·） was evaluated by means of electron spin resonance（EPR）.ZnTi-LDHs generated a relatively lower active radicals in contrast with TiO2 and ZnO,which implied an increased safety used as sunscreens.Therefore,this work provides a detailed understanding of UV shielding properties of ZnTiLDHs which was unrevealed previously,and demonstrates the expansive application prospects of ZnTiLDHs in the field of sunscreens.
基金support from the National Natural Science Foundation of China(No.51874362,52002270)the China Postdoctoral Science Foundation(No.2020M670661).
文摘Aqueous Zn metal batteries have become competitive electrochemical energy storage systems owing to their material abundance,low cost,high capacity,and nontoxicity.Nevertheless,the notorious Zn dendrites and poor anode reversibility caused by the insulating by-products and“dead Zn”are still formidable challenges for their practical application.Herein,an SnS-based layer coated on the Zn anode is reported to tackle these problems.The semiconducting SnS with a higher work function can drive the electrons from the Zn anode,which constructs a polarized interface between the SnS layer and Zn.The semiconducting importance of the coating layer is verified through theoretical simulations,which can migrate the polarization layer from the electrode surface to a wellprotected spot beneath the coating layer.This polarization interface is effective in homogenizing the Zn^(2+)flux and repelling the anions from electrochemical corrosion.Compared with the bare Zn,the SnS-coated Zn anode exhibits a notable 14.7-fold enhancement in plating/stripping lifetime(over 3000 h),high reversibility(with CE of 99.74%),and superior stability in full cells when paired with vanadium-and manganese-based cathodes.
基金supported by the National Natural Science Foundation of China (Grant No.10701023)and the E-Institutes of Shanghai Municipal Education Commission (Grant No.E03004)
文摘In this paper, a kind of singularly perturbed first-order differential equations with integral boundary condition are considered. With the method of boundary layer function and the Banach fixed-point theorem, the uniformly valid asymptotic solution of the original problem is obtained.
基金the National Natural Science Foundation of China(Grant No.61865008).
文摘We propose a simple one-dimensional grating coupling system that can excite multiple surface plasmon resonances for refractive index(RI)sensing with self-reference characteristics in the near-infrared band.Using theoretical analysis and the finite-difference time-domain method,the plasmonic mechanism of the structure is discussed in detail.The results show that the excited resonances are independent of each other and have different fields of action.The mode involving extensive interaction with the analyte environment achieves a high sensitivity of 1236 nm/RIU,and the figure of merit(FOM)can reach 145 RIU-1.Importantly,the mode that is insensitive to the analyte environment exhibits good self-reference characteristics.Moreover,we discuss the case of exchanging the substrate material with the analyte environment.Promising simulation results show that this RI sensor can be widely deployed in unstable and complicated environments.
文摘Motivated by the autopilot of an unmanned aerial vehicle（UAV） with a wide flight envelope span experiencing large parametric variations in the presence of uncertainties, a fuzzy adaptive tracking controller（FATC） is proposed. The controller consists of a fuzzy baseline controller and an adaptive increment, and the main highlight is that the fuzzy baseline controller and adaptation laws are both based on the fuzzy multiple Lyapunov function approach, which helps to reduce the conservatism for the large envelope and guarantees satisfactory tracking performances with strong robustness simultaneously within the whole envelope. The constraint condition of the fuzzy baseline controller is provided in the form of linear matrix inequality（LMI）, and it specifies the satisfactory tracking performances in the absence of uncertainties. The adaptive increment ensures the uniformly ultimately bounded（UUB） predication errors to recover satisfactory responses in the presence of uncertainties. Simulation results show that the proposed controller helps to achieve high-accuracy tracking of airspeed and altitude desirable commands with strong robustness to uncertainties throughout the entire flight envelope.
文摘In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs and AFM roughness profiles of treated samples and the contrast groups were obtained.Besides,XPS survey spectrums and high resolution spectrums were also investigated.The adhesion test revealed that ion bombardment could improve the adhesion to the polyurethane coating substrate.A better etching result of oxygen ions versus nitrogen predicts a higher bonding strength of zirconium coating on polyurethane and,indeed,the highest bonding strengths are for oxygen ion bombardment upto 13.3 MPa.As demonstrated in X-ray photoelectron spectroscopy,the oxygen ion also helps to introduce more active groups,and,therefore,it achieves a high value of adhesion strength.
基金supported by National Natural Science Foundation of China (Nos. U1333201, 11502123 and 11262012 )
文摘A cylindrical system of vector functions, the stiffness matrix method and the corresponding recursive algorithm are proposed to investigate the static response of transversely isotropic,layered magneto-electro-elastic（MEE） structures over a homogeneous half-space substrate subjected to circular surface loading. In terms of the system of vector functions, we expand the extended displacements and stresses, and deduce two sets of ordinary differential equations, which are related to the expansion coeficients. The solution to one of the two sets of these ordinary differential equations can be evaluated by using the stiffness matrix method and the corresponding recursive algorithm. These expansion coeficients are then integrated by adaptive Gaussian quadrature to obtain the displacements and stresses in the physical domain. Two types of surface loads, mechanical pressure and electric loading,are considered in the numerical examples. The calculated results show that the proposed technique is stable and effective in analyzing the layered half-space MEE structures under surface loading.
