Sodium layered oxides stand out as one of the most promising cathodes for sodium-ion batteries due to their high energy density,elemental abundance,and scalability.However,their practical applications are restricted b...Sodium layered oxides stand out as one of the most promising cathodes for sodium-ion batteries due to their high energy density,elemental abundance,and scalability.However,their practical applications are restricted by interplanar gliding,cation migration,and the formation of intragranular microcracks,which collectively lead to rapid structural degradation and capacity loss.Herein,we rationally design an ultrastable O3-type Na_(0.94)Ca_(0.03)Ni_(1/3)Fe_(1/3)Mn_(1/3)O_(2) cathode,in which Ca^(2+)cations act as pillars within the NaO_(2)slabs,suppressing the irreversible phase transitions and Na/TM cation migration commonly observed in layered oxides.Multiscale in situ and ex situ techniques,combined with post-mortem analysis,reveal that the Ca-pillared pinning effect not only effectively suppresses the interplanar gliding and stress accumulation within the crystal phase but also restrains Na/TM cation migration and surface reconstruction in near-surface regions.Benefiting from the combined effects of structural stabilization,the Ca-pillared cathode exhibits a superior cycling stability,retaining 81.6%of its capacity after 1000 cycles at 2 C within the voltage range of 2.0-4.0 V,along with significantly enhanced wide-temperature(from-40 to 80℃)performance.This work highlights another critical role of Ca pillars in suppressing cation migration and surface structural degradation beyond preventing adverse interplanar gliding,offering valuable insights for designing long-life and wide-temperature layered oxide cathodes.展开更多
The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of thes...The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of these materials is impeded by two main factors:the MnO_(6) structure distortion induced by the Jahn-Teller(J-T)effect of Mn^(3+),and the unfavorable phase transitions that occur during the insertion and extraction of Na^(+).Here,we present a strategy to improve structural stability by incorporating cost-effective,robust Al-O bonds.This approach induces localized adjustments in the electronic structu re and a pinning effect,which limits the deformation of the transition metal(TM)layers,strengthens the electrostatic bonding within the TM layers,and expands the Na layer spacing.Consequently,the Na_(0.67)Fe_(0.4)Mn_(0.54)Al_(0.06)O_(2) cathode demonstrates a capacity of 168.8 mAh g^(-1) at 0.1 C,maintaining89.2%of its original capacity after 200 cycles at 1 C.Through in situ electrochemical impedance spectroscopy(EIS)with dynamic resistance transformation(DRT)analysis,ex situ X-ray absorption spectroscopy(XAS),and in situ X-ray diffraction(XRD),the study demonstrates a reduction in the J-T effect,enhanced kinetic performance,and the inhibition of detrimental phase transitions.This study offers new avenues to the development and design of future low-cost Fe/Mn-based cathodes.展开更多
Sodium-ion batteries(SIBs)have attracted significant attention in large-scale energy storage system because of their abundant sodium resource and cost-effectiveness.Layered oxide materials are particularly promising a...Sodium-ion batteries(SIBs)have attracted significant attention in large-scale energy storage system because of their abundant sodium resource and cost-effectiveness.Layered oxide materials are particularly promising as SIBs cathodes due to their high theoretical capacities and facile synthesis.However,their practical applications are hindered by the limitations in energy density and cycling stability.The comprehensive understanding of failure mechanisms within bulk structure and at the cathode/electrolyte interface of cathodes is still lacking.In this review,the issues related to bulk phase degradation and surface degradation,such as irreversible phase transitions,cation migration,transition metal dissolution,air/moisture instability,intergranular cracking,interfacial reactions,and reactive oxygen loss,are discussed.The latest advances and strategies to improve the stability of layered oxide cathodes and full cells are provided,as well as our perspectives on the future development of SIBs.展开更多
Mn-based layered oxides(KMO)have emerged as one of the promising low-cost cathodes for potassiumion batteries(PIBs).However,due to the multiple-phase transitions and the distortion in the MnO6structure induced by the ...Mn-based layered oxides(KMO)have emerged as one of the promising low-cost cathodes for potassiumion batteries(PIBs).However,due to the multiple-phase transitions and the distortion in the MnO6structure induced by the Jahn-Teller(JT)effect associated with Mn-ion,the cathode exhibits poor structural stability.Herein,we propose a strategy to enhance structural stability by introducing robust metal-oxygen(M-O)bonds,which can realize the pinning effect to constrain the distortion in the transition metal(TM)layer.Concurrently,all the elements employed have exceptionally high crustal abundance.As a proof of concept,the designed K_(0.5)Mn_(0.9)Mg_(0.025)Ti_(0.025)Al_(0.05)O_(2)cathode exhibited a discharge capacity of approximately 100 mA h g^(-1)at 20 mA g^(-1)with 79%capacity retention over 50 cycles,and 73%capacity retention over 200 cycles at 200 mA g^(-1),showcased much better battery performance than the designed cathode with less robust M-O bonds.The properties of the formed M-O bonds were investigated using theoretical calculations.The enhanced dynamics,mitigated JT effect,and improved structural stability were elucidated through the in-situ X-ray diffractometer(XRD),in-situ electrochemical impedance spectroscopy(EIS)(and distribution of relaxation times(DRT)method),and ex-situ X-ray absorption fine structure(XAFS)tests.This study holds substantial reference value for the future design of costeffective Mn-based layered cathodes for PIBs.展开更多
P2-type layered oxide Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)(NM)is a promising cathode material for sodium-ion batteries(SIBs).However,the severe irreversible phase transition,sluggish Na+diffusion kinetics,and interfacial sid...P2-type layered oxide Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)(NM)is a promising cathode material for sodium-ion batteries(SIBs).However,the severe irreversible phase transition,sluggish Na+diffusion kinetics,and interfacial side reactions at high-voltage result in grievous capacity degradation and inferior electrochemical performance.Herein,a dual-function strategy of entropy tuning and artificial cathode electrolyte interface(CEI)layer construction is reported to generate a novel P2-type medium-entropy Na_(0.75)Li_(0.1)Mg_(0.05)Ni_(0.18)Mn_(0.66)Ta_(0.01)O_(2)with NaTaO_(3)surface modification(LMNMT)to address the aforementioned issues.In situ X-ray diffraction reveals that LMNMT exhibits a near zero-strain phase transition with a volume change of only 1.4%,which is significantly lower than that of NM(20.9%),indicating that entropy tuning effectively suppresses irreversible phase transitions and enhances ion diffusion.Kinetic analysis and post-cycling interfacial characterization further confirm that the artificial CEI layer promotes the formation of a stable,thin NaF-rich CEI and reduces interfacial side reactions,thereby further enhancing ion transport kinetics and surface/interface stability.Consequently,the LMNMT electrode exhibits outstanding rate capability(46 mA h g^(−1)at 20 C)and cycling stability(89.5%capacity retention after 200 cycles at 2 C)within the voltage range of 2–4.35 V.The LMNMT also exhibits superior all-climate performance and air stability.This study provides a novel path for the design of high-voltage cathode materials for SIBs.展开更多
Ni-rich layered oxide cathode materials such as LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NCM811)face poor interfacial stability and serious side reactions with sulfide solid-state electrolytes.This problem is thought to be exa...Ni-rich layered oxide cathode materials such as LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NCM811)face poor interfacial stability and serious side reactions with sulfide solid-state electrolytes.This problem is thought to be exacerbated by the gradually accumulated basicity of the surface with the Ni content increasing.Herein,the acidic Li_(3)PO_(4)coating layer on NCM811 particles is introduced by ball-milling approach to neutralize the basicity and aggrandize the interfacial stability.The tailored surface structure and components of NCM811 not only suppress the direct contact of cathode particles with sulfide solid-state electrolyte,but also facilitate electrochemical dynamics by driving the Li+migration across the interface and promoting the electron exchange.Thus,cells with Li_(3)PO_(4)coating layer yield 101.3 mAh g^(-1)specific capacity at 2.0 C and highly reversed discharging capacity after suffering from harsh work conditions.Additionally,the stable coating layer broadens the electrochemical windows of cells,delivering long cycle stability(>100 cycles 0.5 C).This contribution highlights the importance of basicity regulation of Ni-rich layered oxide cathode and offers a low-cost and effective approach to design the interfacial structures for the development of all solid-state batteries.展开更多
O3-type layered oxide cathodes for sodium-ion batteries are promising owing to high theoretical capacity and broad temperature adaptability,yet hindered by structural degradation and sluggish Na^(+)diffusion kinetics....O3-type layered oxide cathodes for sodium-ion batteries are promising owing to high theoretical capacity and broad temperature adaptability,yet hindered by structural degradation and sluggish Na^(+)diffusion kinetics.Herein,we present a sodium-deficient high-entropy layered oxide cathode(Na_(0.85)Ni_(0.3)Mn_(0.3)Fe_(0.1)Co_(0.15)Ti_(0.1)Cu_(0.05)B_(0.02)O_(2),denoted as Na0.85-HEO),combining sodium content optimization and high-entropy composition design.Incorporating six transition metals and light element boron creates a unique high-entropy configuration,effectively mitigating local lattice distortion and internal strain through chemical disorder effects,thereby enabling highly reversible phase transitions(O3-P3-O3)and smaller volume change(0.6A^(3))during the initial cycle.The sodium-deficient high-entropy design effectively increases the sodium interlayer spacing to 0.322 nm,facilitating the Na^(+)diffusion kinetics.Moreover,this high-entropy strategy enables the cathode to have a completely solid solution charge curve and significantly reduces the proportion of(O_(2))^(n-),thereby suppressing gas release during the cycling process.The resultant cathode demonstrates exceptional cyclability(80% capacity retention after 400 cycles at 100 mA g^(-1)in a full cell),and remarkable low-temperature performance(108.6 mAh g^(-1)at -40℃).This work guides the design of high-entropy electrode materials with tailored ionic transport channels for extreme-temperature energy storage applications.展开更多
In the realm of sodium-ion batteries(SIBs),Mn-based layered oxide cathodes have garnered considerable attention owing to their anionic redox reactions(ARRs).Compared to other types of popular sodium-ion cathodes,Mn-ba...In the realm of sodium-ion batteries(SIBs),Mn-based layered oxide cathodes have garnered considerable attention owing to their anionic redox reactions(ARRs).Compared to other types of popular sodium-ion cathodes,Mn-based layered oxide cathodes with ARRs exhibit outstanding specific capacity and energy density,making them promising for SIB applications.However,these cathodes still face some scientific challenges that need to be addressed.This review systematically summarizes the composition,structure,oxygen-redox mechanism,and performance of various types of Mn-based cathodes with ARRs,as well as the main scientific challenges they face,including sluggish ion diffusion,cationic migration,O_(2) release,and element dissolution.Currently,to resolve these challenges,efforts mainly focus on six aspects:synthesis methods,structural design,doped modification,electrolyte design,and surface engineering.Finally,this review provides new insights for future direction,encompassing both fundamental research,such as novel cathode types,interface optimization,and interdisciplinary research,and considerations from an industrialization perspective,including scalability,stability,and safety.展开更多
Na-ion O3-type layered oxides are prospective cathodes for Na-ion batteries due to high energy density and low-cost.Nevertheless,such cathodes usually suffer from phase transitions,sluggish kinetics and air instabilit...Na-ion O3-type layered oxides are prospective cathodes for Na-ion batteries due to high energy density and low-cost.Nevertheless,such cathodes usually suffer from phase transitions,sluggish kinetics and air instability,making it difficult to achieve high performance solid-state sodium-ion batteries.Herein,the high-entropy design and Li doping strategy alleviate lattice stress and enhance ionic conductivity,achieving high-rate performance,air stability and electrochemically thermal stability for Na_(0.95)Li_(0.06)Ni_(0.25)Cu_(0.05)Fe_(0.15)Mn_(0.49)O_(2).This cathode delivers a high reversible capacity(141 mAh g^(−1)at 0.2C),excellent rate capability(111 mAh g^(−1)at 8C,85 mAh g^(−1)even at 20C),and long-term stability(over 85%capacity retention after 1000 cycles),which is attributed to a rapid and reversible O3–P3 phase transition in regions of low voltage and suppresses phase transition.Moreover,the compound remains unchanged over seven days and keeps thermal stability until 279℃.Remarkably,the polymer solid-state sodium battery assembled by this cathode provides a capacity of 92 mAh g^(−1)at 5C and keeps retention of 96%after 400 cycles.This strategy inspires more rational designs and could be applied to a series of O3 cathodes to improve the performance of solid-state Na-ion batteries.展开更多
In advantages of their high capacity and high operating voltage,the nickel(Ni)-rich layered transition metal oxide cathode materials(LiNi_(x)Co_(y)Mn_(z)O_(2)(NCMxyz,x+y+z=1,x≥0.5)and LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2...In advantages of their high capacity and high operating voltage,the nickel(Ni)-rich layered transition metal oxide cathode materials(LiNi_(x)Co_(y)Mn_(z)O_(2)(NCMxyz,x+y+z=1,x≥0.5)and LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)(NCA))have been arousing great interests to improve the energy density of LIBs.However,these Nirich cathodes always suffer from rapid capacity degradation induced by unstable cathode-electrolyte interphase(CEI)layer and destruction of bulk crystal structure.Therefore,varied electrode/electrolyte interface engineering strategies(such as electrolyte formulation,material coating or doping)have been developed for Ni-rich cathodes protection.Among them,developing electrolyte functional additives has been proven to be a simple,effective,and economic method to improve the cycling stability of Nirich cathodes.This is achieved by removing unfavorable species(such as HF,H_(2)O)or constructing a stable and protective CEI layer against unfavorable reactive species(such as HF,H_(2)O).Herein,this review mainly introduces the varied classes of electrolyte functional additives and their working mechanism for interfacial engineering of Ni-rich cathodes.Especially,key favorable species for stabilizing CEI layer are summarized.More importantly,we put forward perspectives for screening and customizing ideal functional additives for high performance Ni-rich cathodes based LIBs.展开更多
The interfacial instability between Ni-rich layered oxide cathodes and sulfide electrolytes is a serious problem,leading to poor electrochemical properties of all-solid-state lithium batteries(ASSLB).The chemical/elec...The interfacial instability between Ni-rich layered oxide cathodes and sulfide electrolytes is a serious problem,leading to poor electrochemical properties of all-solid-state lithium batteries(ASSLB).The chemical/electrochemical side reactions are considered to be the origin of the interfacial deterioration.However,the influence of chemical and electrochemical side reactions on the interfacial deterioration is rarely studied specifically.In this work,the deterioration mechanism of the interface between LiNi0.85-xCo0.15AlxO2 and Li10GeP2S12 is investigated in detail by combining in/ex-situ Raman spectra and Electrochemical Impedance Spectroscopy(EIS).It can be determined that chemical side reaction between LiNi0.8Co0.15Al0.05O2 and Li10GeP2S12 will occur immediately once contacted,and the interfacial deterioration becomes more serious after charge-discharge process under the dual effects of chemical and electrochemical side reactions.Moreover,our research reveals that the interfacial stability and the cycle performance of ASSLB can be greatly enhanced by increasing Al-substitution for Ni in LiNi0.85-xCo0.15AlxO2.In particular,the capacity retention of LiNi0.6Co0.15Al0.25O2 cathode after 200 cycles can reach 81.9%,much higher than that of LiNi0.8Co0.15Al0.05O2 cathode(12.5%@200 cycles).This work gives an insight to study the interfacial issues between Ni-rich layered oxide cathode and sulfide electrolyte for ASSLBs.展开更多
Due to a high energy density,layered transition-metal oxides have gained much attention as the promising sodium-ion batteries cathodes.However,they readily suffer from multiple phase transitions during the Na extracti...Due to a high energy density,layered transition-metal oxides have gained much attention as the promising sodium-ion batteries cathodes.However,they readily suffer from multiple phase transitions during the Na extraction process,resulting in large lattice strains which are the origin of cycledstructure degradations.Here,we demonstrate that the Na-storage lattice strains of layered oxides can be reduced by pushing charge transfer on anions(O^(2-)).Specifically,the designed O3-type Ru-based model compound,which shows an increased charge transfer on anions,displays retarded O3-P3-O1 multiple phase transitions and obviously reduced lattice strains upon cycling as directly revealed by a combination of ex situ X-ray absorption spectroscopy,in situ X-ray diffraction and geometric phase analysis.Meanwhile,the stable Na-storage lattice structure leads to a superior cycling stability with an excellent capacity retention of 84%and ultralow voltage decay of 0.2 mV/cycle after 300 cycles.More broadly,our work highlights an intrinsically structure-regulation strategy to enable a stable cycling structure of layered oxides meanwhile increasing the materials’redox activity and Nadiffusion kinetics.展开更多
Li and Mn rich(LMR)layered oxides,written as xLi_(2) MnO_(3)·(1-x)LiMO_(2)(M=Mn,Ni,Co,Fe,etc.),have been widely reported in recent years due to their high capacity and high energy density.The stable structure and...Li and Mn rich(LMR)layered oxides,written as xLi_(2) MnO_(3)·(1-x)LiMO_(2)(M=Mn,Ni,Co,Fe,etc.),have been widely reported in recent years due to their high capacity and high energy density.The stable structure and superior performance of LMR oxides make them one of the most promising candidates for the next-generation cathode materials.However,the commercialization of these materials is hindered by several drawbacks,such as low initial Coulombic efficiency,the degradation of voltage and capacity during cycling,and poor rate performance.This review summarizes research progress in solving these concerns of LMR cathodes over the past decade by following three classes of strategies:morphology design,bulk design,and surface modification.We elaborate on the processing procedures,electrochemical performance,mechanisms,and limitations of each approach,and finally put forward the concerns left and the possible solutions for the commercialization of LMR cathodes.展开更多
Oxygen redox is considered a new paradigm for increasing the practical capacity and energy density of the layered oxide cathodes for Na-ion batteries. However, severe local structural changes and phase transitions dur...Oxygen redox is considered a new paradigm for increasing the practical capacity and energy density of the layered oxide cathodes for Na-ion batteries. However, severe local structural changes and phase transitions during anionic redox reactions lead to poor electrochemical performance with sluggish kinetics.Here, we propose a synergy of Li-Cu cations in harnessing the full potential of oxygen redox, through Li displacement and suppressed phase transition in P3-type layered oxide cathode. P3-type Na_(0.7)[Li_(0.1)Cu_(0.2)Mn_(0.7)]O_(2) cathode delivers a large specific capacity of ~212 mA h g^(-1)at 15 mA g^(-1). The discharge capacity is maintained up to ~90% of the initial capacity after 100 cycles, with stable occurrence of the oxygen redox in the high-voltage region. Through advanced experimental analyses and first-principles calculations, it is confirmed that a stepwise redox reaction based on Cu and O ions occurs for the charge-compensation mechanism upon charging. Based on a concrete understanding of the reaction mechanism, the Li displacement by the synergy of Li-Cu cations plays a crucial role in suppressing the structural change of the P3-type layered material under the oxygen redox reaction, and it is expected to be an effective strategy for stabilizing the oxygen redox in the layered oxides of Na-ion batteries.展开更多
Understanding the structural origin of the competition between oxygen 2p and transition-metal 3d orbitals in oxygen-redox(OR)layered oxides is eminently desirable for exploring reversible and high-energy-density Li/Na...Understanding the structural origin of the competition between oxygen 2p and transition-metal 3d orbitals in oxygen-redox(OR)layered oxides is eminently desirable for exploring reversible and high-energy-density Li/Na-ion cathodes.Here,we reveal the correlation between cationic ordering transition and OR degradation in ribbon-ordered P3-Na_(0.6)Li_(0.2)Mn_(0.8)O_(2) via in situ structural analysis.Comparing two different voltage windows,the OR capacity can be improved approximately twofold when suppressing the in-plane cationic ordering transition.We find that the intralayer cationic migration is promoted by electrochemical reduction from Mn^(4+)to Jahn–Teller Mn^(3+)and the concomitant NaO_(6) stacking transformation from triangular prisms to octahedra,resulting in the loss of ribbon ordering and electrochemical decay.First-principles calculations reveal that Mn^(4+)/Mn^(3+)charge ordering and alignment of the degenerate eg orbital induce lattice-level collective Jahn–Teller distortion,which favors intralayer Mn-ion migration and thereby accelerates OR degradation.These findings unravel the relationship between in-plane cationic ordering and OR reversibility and highlight the importance of superstructure protection for the rational design of reversible OR-active layered oxide cathodes.展开更多
High-capacity O3-type layered NiFeMn-based oxides are promising cathodes for sodium-ion batteries,though their practical deployment is constrained by the inherent limitations of Fe redox chemistry.Traditional designs ...High-capacity O3-type layered NiFeMn-based oxides are promising cathodes for sodium-ion batteries,though their practical deployment is constrained by the inherent limitations of Fe redox chemistry.Traditional designs generally enforcing stoichiometric symmetry(Ni=Mn)yield low Fe redox activity.Herein,we propose a valence engineering strategy that breaks conventional Ni/Mn stoichiometry to reconfigure Fe's local chemical environment and unlock unprecedented redox depth.Density functional theory(DFT)calculations reveal that the designed NaNi_(0.35)Fe_(0.225)Mn_(0.425)O_(2)cathode exhibits a reduced Bader charge on Fe(1.598 vs.1.638 in NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2))and elevated Fe 3d orbital energy,signifying enhanced Fe redox activity.This configuration enables an exceptional Fe^(2.60+)/Fe^(3.88+)redox(1.28 e~-per Fe),delivering a reversible capacity of184.3 mAh g^(-1)within 2-4.2 V at 0.2 C,markedly exceeding the benchmark NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2)(161.3 mAh g^(-1))with low reaction depth of Fe^(3.01+)/Fe^(3.61+).The intensified cationic redox reaction enables an ultrahigh energy density of 596 Whkg-1.The NaNi_(0.35)Fe_(0.225)Mn_(0.425)O_(2)cathode demonstrates robust performance over a broad temperature range from-15℃to 60℃.In situ and ex situ characterizations unveil a reversible O3■P3■OP2 phase transition with minimal volume change(1.88%)that circumvents detrimental deleterious O'3 intermediates and intragranular cracking.This work establishes valence engineering as a paradigm to consolidate cationic redox reaction in high-energy layered sodium oxide cathodes.展开更多
Lithium-rich layered oxide cathodes have an advantage of high energy density.However,continuous capacity fading and voltage hysteresis have largely restricted their practical application.In this work,we investigated i...Lithium-rich layered oxide cathodes have an advantage of high energy density.However,continuous capacity fading and voltage hysteresis have largely restricted their practical application.In this work,we investigated in depth the voltage-fading mechanism of Li-rich materials by in situ Raman spectroscopy,X-ray absorption near edge structure(XANES)spectroscopy,andhigh-resolution transmission electron microscopy(HRTEM).展开更多
Lithium-ion batteries(LIBs)drive the energy transition towards decarbonization by being widely deployed in almost every aspect of our daily life,ranging from portable electronics to e-vehicles and grid storage.In a ty...Lithium-ion batteries(LIBs)drive the energy transition towards decarbonization by being widely deployed in almost every aspect of our daily life,ranging from portable electronics to e-vehicles and grid storage.In a typical LIB,Li-ions shuttle between the cathode and anode upon charging/discharging to store and release energy on demand with high round-trip efficiency.展开更多
Sodium-ion batteries(SIBs)have garnered significant attentions for grid-scale energy storage due to the low cost and abundant sodium resources.Among the various cathode materials,sodium layered transition metal oxides...Sodium-ion batteries(SIBs)have garnered significant attentions for grid-scale energy storage due to the low cost and abundant sodium resources.Among the various cathode materials,sodium layered transition metal oxides(Na_(x)TMO_(2))are considered highly promising for practical applications of SIBs relying on their high theoretical capacities and facile syntheses.However,the poor air stability,sluggish interfacial kinetics,and detrimental phase transitions of Na_(x)TMO_(2) commonly result in unsatisfactory cycling stability as well as inferior rate capability.In this review,recent achievements and progress in interfacial regulations aimed at improving the air stability and electrochemical performances of Na_(x)TMO_(2),such as organic/inorganic coating,interfacial-coating-doping,and heterogeneous phase designing are summarized.Such approaches can not only enable the in-situ conversion of residual alkali and/or enhance the interfacial stability,but also improve the electrochemical reaction kinetics and mitigate phase evolutions.The structural stability enhancement mechanisms of Na_(x)TMO_(2) layered oxides resulted from surface reconstructions are profoundly discussed and the influences on their electrochemical properties are concluded in this work.Finally,we outlook the novel interfacial modification strategies like of layered-tunnel heterostructure building and organicinorganic co-coating.The state-of-the-art characterization techniques and artificial intelligence are also elaborated to develop high-performance Na_(x)TMO_(2) cathodes in the future.We believe that the insights presented in this review can serve as meaningful guidance for the interfacial modulations of Na_(x)TMO_(2) cathodes.展开更多
O3-type layered oxides are among the most promising cathode candidates for sodium-ion batteries,yet their practical use is constrained by irreversible oxygen redox at high voltages,parasitic side reactions,and pronoun...O3-type layered oxides are among the most promising cathode candidates for sodium-ion batteries,yet their practical use is constrained by irreversible oxygen redox at high voltages,parasitic side reactions,and pronounced moisture sensitivity.Here,we propose a one-step H_(3)BO_(3) treatment that introduces an in-situ boride complex,enabling near-surface B doping and the formation of a conformal sodium borate interphase.The dual modification operates synergistically:B incorporation reinforces the layered framework and suppresses oxygen redox above 4.0 V,while the sodium borate layer,endowed with high Na+conductivity,functions as a robust interfacial barrier.These effects collectively suppress transition-metal dissolution,mitigate electrolyte decomposition,and promote rapid Na+transport.Benefiting from this design,the optimized cathode delivers 160.5 mAh g^(−1) at 0.1C and retains 85.3%capacity after 200 cycles at 1C.Moreover,the sodium borate coating effectively blocks H^(+)/H_(2)O ingress,conferring exceptional air stability.After 150 cycles,3-days-aged pristine cathode retains 4.7% of the fresh capacity,whereas optimized cathode maintains nearly pristine cycling stability.Even after seven days of exposure,only trace Na_(2)CO_(3) impurities are detected.This work establishes in situ boride complexes as a viable strategy to achieve electrochemically robust and moisture-tolerant sodium-ion cathodes for grid-scale energy storage.展开更多
基金supported by the National Key R&D Program of China(2023YFB2406000)the National Natural Science Foundation of China(22479057,52172201,51732005)。
文摘Sodium layered oxides stand out as one of the most promising cathodes for sodium-ion batteries due to their high energy density,elemental abundance,and scalability.However,their practical applications are restricted by interplanar gliding,cation migration,and the formation of intragranular microcracks,which collectively lead to rapid structural degradation and capacity loss.Herein,we rationally design an ultrastable O3-type Na_(0.94)Ca_(0.03)Ni_(1/3)Fe_(1/3)Mn_(1/3)O_(2) cathode,in which Ca^(2+)cations act as pillars within the NaO_(2)slabs,suppressing the irreversible phase transitions and Na/TM cation migration commonly observed in layered oxides.Multiscale in situ and ex situ techniques,combined with post-mortem analysis,reveal that the Ca-pillared pinning effect not only effectively suppresses the interplanar gliding and stress accumulation within the crystal phase but also restrains Na/TM cation migration and surface reconstruction in near-surface regions.Benefiting from the combined effects of structural stabilization,the Ca-pillared cathode exhibits a superior cycling stability,retaining 81.6%of its capacity after 1000 cycles at 2 C within the voltage range of 2.0-4.0 V,along with significantly enhanced wide-temperature(from-40 to 80℃)performance.This work highlights another critical role of Ca pillars in suppressing cation migration and surface structural degradation beyond preventing adverse interplanar gliding,offering valuable insights for designing long-life and wide-temperature layered oxide cathodes.
基金financially supported by the National Natural Science Foundation of China(52274295)the Natural Science Foundation of Hebei Province(E2025501032,E2025501028)+3 种基金the Fundamental Research Funds for the Central Universities(N2523045,N2423051,N2423005,N2423019)the Science and Technology Project of Hebei Education Department(QN2024238)the Central Guided Local Science and Technology Development Fund Project of Hebei Province(254Z1102G)the Basic Research Program Project of Shijiazhuang City for Universities Stationed in Hebei Province(241790937A)。
文摘The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of these materials is impeded by two main factors:the MnO_(6) structure distortion induced by the Jahn-Teller(J-T)effect of Mn^(3+),and the unfavorable phase transitions that occur during the insertion and extraction of Na^(+).Here,we present a strategy to improve structural stability by incorporating cost-effective,robust Al-O bonds.This approach induces localized adjustments in the electronic structu re and a pinning effect,which limits the deformation of the transition metal(TM)layers,strengthens the electrostatic bonding within the TM layers,and expands the Na layer spacing.Consequently,the Na_(0.67)Fe_(0.4)Mn_(0.54)Al_(0.06)O_(2) cathode demonstrates a capacity of 168.8 mAh g^(-1) at 0.1 C,maintaining89.2%of its original capacity after 200 cycles at 1 C.Through in situ electrochemical impedance spectroscopy(EIS)with dynamic resistance transformation(DRT)analysis,ex situ X-ray absorption spectroscopy(XAS),and in situ X-ray diffraction(XRD),the study demonstrates a reduction in the J-T effect,enhanced kinetic performance,and the inhibition of detrimental phase transitions.This study offers new avenues to the development and design of future low-cost Fe/Mn-based cathodes.
基金supported by the National Natural Science Foundation of China(Grant No.W2412060,22325902 and 52171215)the State Key Laboratory of Clean Energy Utilization(Open Fund Project No.ZJUCEU2023002)。
文摘Sodium-ion batteries(SIBs)have attracted significant attention in large-scale energy storage system because of their abundant sodium resource and cost-effectiveness.Layered oxide materials are particularly promising as SIBs cathodes due to their high theoretical capacities and facile synthesis.However,their practical applications are hindered by the limitations in energy density and cycling stability.The comprehensive understanding of failure mechanisms within bulk structure and at the cathode/electrolyte interface of cathodes is still lacking.In this review,the issues related to bulk phase degradation and surface degradation,such as irreversible phase transitions,cation migration,transition metal dissolution,air/moisture instability,intergranular cracking,interfacial reactions,and reactive oxygen loss,are discussed.The latest advances and strategies to improve the stability of layered oxide cathodes and full cells are provided,as well as our perspectives on the future development of SIBs.
基金financially supported by the National Natural Science Foundation of China(NSFC)(52274295)the Natural Science Foundation of Hebei Province(E2021501029)+3 种基金the Fundamental Research Funds for the Central Universities(N2423051,N2423053,N2302016,N2423019,N2323013,N2423005)the Science and Technology Project of Hebei Education Department(QN2024238)the Basic Research Program Project of Shijiazhuang City for Universities Stationed in Hebei Province(241790937A)the Science and Technology Project of Qinhuangdao City in 2023.
文摘Mn-based layered oxides(KMO)have emerged as one of the promising low-cost cathodes for potassiumion batteries(PIBs).However,due to the multiple-phase transitions and the distortion in the MnO6structure induced by the Jahn-Teller(JT)effect associated with Mn-ion,the cathode exhibits poor structural stability.Herein,we propose a strategy to enhance structural stability by introducing robust metal-oxygen(M-O)bonds,which can realize the pinning effect to constrain the distortion in the transition metal(TM)layer.Concurrently,all the elements employed have exceptionally high crustal abundance.As a proof of concept,the designed K_(0.5)Mn_(0.9)Mg_(0.025)Ti_(0.025)Al_(0.05)O_(2)cathode exhibited a discharge capacity of approximately 100 mA h g^(-1)at 20 mA g^(-1)with 79%capacity retention over 50 cycles,and 73%capacity retention over 200 cycles at 200 mA g^(-1),showcased much better battery performance than the designed cathode with less robust M-O bonds.The properties of the formed M-O bonds were investigated using theoretical calculations.The enhanced dynamics,mitigated JT effect,and improved structural stability were elucidated through the in-situ X-ray diffractometer(XRD),in-situ electrochemical impedance spectroscopy(EIS)(and distribution of relaxation times(DRT)method),and ex-situ X-ray absorption fine structure(XAFS)tests.This study holds substantial reference value for the future design of costeffective Mn-based layered cathodes for PIBs.
基金supported by the National Natural Science Foundation of China(52272295,52071137,51977071,51802040,and 21802020)the Science and Technology Innovation Program of Hunan Province(2021RC3066 and 2021RC3067)+2 种基金the Natural Science Foundation of Hunan Province(2020JJ3004 and 2020JJ4192)Graduate Research Innovation Project of Hunan Province(CX20240456 and CX20240405)N.Zhang and X.Xie also acknowledge the financial support of the Fundamental Research Funds for the Central。
文摘P2-type layered oxide Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)(NM)is a promising cathode material for sodium-ion batteries(SIBs).However,the severe irreversible phase transition,sluggish Na+diffusion kinetics,and interfacial side reactions at high-voltage result in grievous capacity degradation and inferior electrochemical performance.Herein,a dual-function strategy of entropy tuning and artificial cathode electrolyte interface(CEI)layer construction is reported to generate a novel P2-type medium-entropy Na_(0.75)Li_(0.1)Mg_(0.05)Ni_(0.18)Mn_(0.66)Ta_(0.01)O_(2)with NaTaO_(3)surface modification(LMNMT)to address the aforementioned issues.In situ X-ray diffraction reveals that LMNMT exhibits a near zero-strain phase transition with a volume change of only 1.4%,which is significantly lower than that of NM(20.9%),indicating that entropy tuning effectively suppresses irreversible phase transitions and enhances ion diffusion.Kinetic analysis and post-cycling interfacial characterization further confirm that the artificial CEI layer promotes the formation of a stable,thin NaF-rich CEI and reduces interfacial side reactions,thereby further enhancing ion transport kinetics and surface/interface stability.Consequently,the LMNMT electrode exhibits outstanding rate capability(46 mA h g^(−1)at 20 C)and cycling stability(89.5%capacity retention after 200 cycles at 2 C)within the voltage range of 2–4.35 V.The LMNMT also exhibits superior all-climate performance and air stability.This study provides a novel path for the design of high-voltage cathode materials for SIBs.
基金supported by the National Natural Science Foundation of China(22379121)the Shenzhen Foundation Research Fund(JCYJ20210324104412034)+1 种基金the Fundamental Research Funds for the Central Universities(G2024KY05103)the“Scientists+Engineers”Team in Qinchuangyuan of Shaanxi Province(2024QCY-KXJ-023)。
文摘Ni-rich layered oxide cathode materials such as LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NCM811)face poor interfacial stability and serious side reactions with sulfide solid-state electrolytes.This problem is thought to be exacerbated by the gradually accumulated basicity of the surface with the Ni content increasing.Herein,the acidic Li_(3)PO_(4)coating layer on NCM811 particles is introduced by ball-milling approach to neutralize the basicity and aggrandize the interfacial stability.The tailored surface structure and components of NCM811 not only suppress the direct contact of cathode particles with sulfide solid-state electrolyte,but also facilitate electrochemical dynamics by driving the Li+migration across the interface and promoting the electron exchange.Thus,cells with Li_(3)PO_(4)coating layer yield 101.3 mAh g^(-1)specific capacity at 2.0 C and highly reversed discharging capacity after suffering from harsh work conditions.Additionally,the stable coating layer broadens the electrochemical windows of cells,delivering long cycle stability(>100 cycles 0.5 C).This contribution highlights the importance of basicity regulation of Ni-rich layered oxide cathode and offers a low-cost and effective approach to design the interfacial structures for the development of all solid-state batteries.
基金financially supported by the National Natural Science Foundation of China(No.52071073,52177208,and 52171202)the Hebei Province“333 talent project”(No.C20221012)+2 种基金the Science and Technology Project of Hebei Education Department(BJK2023005)the Fundamental Research Funds for the Central Universities(2024GFZD002)the Natural Science Foundation of Hebei Province(E2024501015)。
文摘O3-type layered oxide cathodes for sodium-ion batteries are promising owing to high theoretical capacity and broad temperature adaptability,yet hindered by structural degradation and sluggish Na^(+)diffusion kinetics.Herein,we present a sodium-deficient high-entropy layered oxide cathode(Na_(0.85)Ni_(0.3)Mn_(0.3)Fe_(0.1)Co_(0.15)Ti_(0.1)Cu_(0.05)B_(0.02)O_(2),denoted as Na0.85-HEO),combining sodium content optimization and high-entropy composition design.Incorporating six transition metals and light element boron creates a unique high-entropy configuration,effectively mitigating local lattice distortion and internal strain through chemical disorder effects,thereby enabling highly reversible phase transitions(O3-P3-O3)and smaller volume change(0.6A^(3))during the initial cycle.The sodium-deficient high-entropy design effectively increases the sodium interlayer spacing to 0.322 nm,facilitating the Na^(+)diffusion kinetics.Moreover,this high-entropy strategy enables the cathode to have a completely solid solution charge curve and significantly reduces the proportion of(O_(2))^(n-),thereby suppressing gas release during the cycling process.The resultant cathode demonstrates exceptional cyclability(80% capacity retention after 400 cycles at 100 mA g^(-1)in a full cell),and remarkable low-temperature performance(108.6 mAh g^(-1)at -40℃).This work guides the design of high-entropy electrode materials with tailored ionic transport channels for extreme-temperature energy storage applications.
基金National Key Research and Development Program of China,Grant/Award Number:2022YFB2502000National Natural Science Foundation of China,Grant/Award Number:52207244。
文摘In the realm of sodium-ion batteries(SIBs),Mn-based layered oxide cathodes have garnered considerable attention owing to their anionic redox reactions(ARRs).Compared to other types of popular sodium-ion cathodes,Mn-based layered oxide cathodes with ARRs exhibit outstanding specific capacity and energy density,making them promising for SIB applications.However,these cathodes still face some scientific challenges that need to be addressed.This review systematically summarizes the composition,structure,oxygen-redox mechanism,and performance of various types of Mn-based cathodes with ARRs,as well as the main scientific challenges they face,including sluggish ion diffusion,cationic migration,O_(2) release,and element dissolution.Currently,to resolve these challenges,efforts mainly focus on six aspects:synthesis methods,structural design,doped modification,electrolyte design,and surface engineering.Finally,this review provides new insights for future direction,encompassing both fundamental research,such as novel cathode types,interface optimization,and interdisciplinary research,and considerations from an industrialization perspective,including scalability,stability,and safety.
基金National Natural Science Foundation of China(52202327)Science and Technology Commission of Shanghai Municipality(22ZR1471300)+2 种基金National Science Foundation of China(Grant 51972326)Youth Innovation Promotion Association CAS,Foundation Strengthening ProjectProgram of Shanghai Academic Research Leader(Grant 22XD1424300).
文摘Na-ion O3-type layered oxides are prospective cathodes for Na-ion batteries due to high energy density and low-cost.Nevertheless,such cathodes usually suffer from phase transitions,sluggish kinetics and air instability,making it difficult to achieve high performance solid-state sodium-ion batteries.Herein,the high-entropy design and Li doping strategy alleviate lattice stress and enhance ionic conductivity,achieving high-rate performance,air stability and electrochemically thermal stability for Na_(0.95)Li_(0.06)Ni_(0.25)Cu_(0.05)Fe_(0.15)Mn_(0.49)O_(2).This cathode delivers a high reversible capacity(141 mAh g^(−1)at 0.2C),excellent rate capability(111 mAh g^(−1)at 8C,85 mAh g^(−1)even at 20C),and long-term stability(over 85%capacity retention after 1000 cycles),which is attributed to a rapid and reversible O3–P3 phase transition in regions of low voltage and suppresses phase transition.Moreover,the compound remains unchanged over seven days and keeps thermal stability until 279℃.Remarkably,the polymer solid-state sodium battery assembled by this cathode provides a capacity of 92 mAh g^(−1)at 5C and keeps retention of 96%after 400 cycles.This strategy inspires more rational designs and could be applied to a series of O3 cathodes to improve the performance of solid-state Na-ion batteries.
基金supported by the National Key R&D Program of China(Grant No.2017YFE0127600)the National Natural Science Foundation of China(Grant No.U1706229、21901248)+2 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDA22010600)the National Natural Science Foundation for Distinguished Young Scholars of China(No.51625204)the Taishan Scholars of Shandong Province(ts201511063)。
文摘In advantages of their high capacity and high operating voltage,the nickel(Ni)-rich layered transition metal oxide cathode materials(LiNi_(x)Co_(y)Mn_(z)O_(2)(NCMxyz,x+y+z=1,x≥0.5)and LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)(NCA))have been arousing great interests to improve the energy density of LIBs.However,these Nirich cathodes always suffer from rapid capacity degradation induced by unstable cathode-electrolyte interphase(CEI)layer and destruction of bulk crystal structure.Therefore,varied electrode/electrolyte interface engineering strategies(such as electrolyte formulation,material coating or doping)have been developed for Ni-rich cathodes protection.Among them,developing electrolyte functional additives has been proven to be a simple,effective,and economic method to improve the cycling stability of Nirich cathodes.This is achieved by removing unfavorable species(such as HF,H_(2)O)or constructing a stable and protective CEI layer against unfavorable reactive species(such as HF,H_(2)O).Herein,this review mainly introduces the varied classes of electrolyte functional additives and their working mechanism for interfacial engineering of Ni-rich cathodes.Especially,key favorable species for stabilizing CEI layer are summarized.More importantly,we put forward perspectives for screening and customizing ideal functional additives for high performance Ni-rich cathodes based LIBs.
基金financially supported partly by the National Key Research and Development Program of China(2018YFE0111600)Tianjin Sci.&Tech.Program(17YFZCGX00560,18ZXJMTG00040,19JCZDJC31800)。
文摘The interfacial instability between Ni-rich layered oxide cathodes and sulfide electrolytes is a serious problem,leading to poor electrochemical properties of all-solid-state lithium batteries(ASSLB).The chemical/electrochemical side reactions are considered to be the origin of the interfacial deterioration.However,the influence of chemical and electrochemical side reactions on the interfacial deterioration is rarely studied specifically.In this work,the deterioration mechanism of the interface between LiNi0.85-xCo0.15AlxO2 and Li10GeP2S12 is investigated in detail by combining in/ex-situ Raman spectra and Electrochemical Impedance Spectroscopy(EIS).It can be determined that chemical side reaction between LiNi0.8Co0.15Al0.05O2 and Li10GeP2S12 will occur immediately once contacted,and the interfacial deterioration becomes more serious after charge-discharge process under the dual effects of chemical and electrochemical side reactions.Moreover,our research reveals that the interfacial stability and the cycle performance of ASSLB can be greatly enhanced by increasing Al-substitution for Ni in LiNi0.85-xCo0.15AlxO2.In particular,the capacity retention of LiNi0.6Co0.15Al0.25O2 cathode after 200 cycles can reach 81.9%,much higher than that of LiNi0.8Co0.15Al0.05O2 cathode(12.5%@200 cycles).This work gives an insight to study the interfacial issues between Ni-rich layered oxide cathode and sulfide electrolyte for ASSLBs.
基金supported by the National Natural Science Foundation of China(Grant No.12105197 and 52088101)Guangdong Basic and Applied Basic Research Foundation(Grant No.2022A1515010319)+1 种基金the open research fund of Songshan Lake Materials Laboratory(No.2022SLABFK04)Large Scientific Facility Open Subject of Songshan Lake,Dongguan,Guangdong
文摘Due to a high energy density,layered transition-metal oxides have gained much attention as the promising sodium-ion batteries cathodes.However,they readily suffer from multiple phase transitions during the Na extraction process,resulting in large lattice strains which are the origin of cycledstructure degradations.Here,we demonstrate that the Na-storage lattice strains of layered oxides can be reduced by pushing charge transfer on anions(O^(2-)).Specifically,the designed O3-type Ru-based model compound,which shows an increased charge transfer on anions,displays retarded O3-P3-O1 multiple phase transitions and obviously reduced lattice strains upon cycling as directly revealed by a combination of ex situ X-ray absorption spectroscopy,in situ X-ray diffraction and geometric phase analysis.Meanwhile,the stable Na-storage lattice structure leads to a superior cycling stability with an excellent capacity retention of 84%and ultralow voltage decay of 0.2 mV/cycle after 300 cycles.More broadly,our work highlights an intrinsically structure-regulation strategy to enable a stable cycling structure of layered oxides meanwhile increasing the materials’redox activity and Nadiffusion kinetics.
基金financially supported by the National Key R&D Program of China(2016YFB0700600)the Soft Science Research Project of Guangdong Province(No.2017B030301013)the Shenzhen Science and Technology Research Grant(ZDSYS201707281026184)。
文摘Li and Mn rich(LMR)layered oxides,written as xLi_(2) MnO_(3)·(1-x)LiMO_(2)(M=Mn,Ni,Co,Fe,etc.),have been widely reported in recent years due to their high capacity and high energy density.The stable structure and superior performance of LMR oxides make them one of the most promising candidates for the next-generation cathode materials.However,the commercialization of these materials is hindered by several drawbacks,such as low initial Coulombic efficiency,the degradation of voltage and capacity during cycling,and poor rate performance.This review summarizes research progress in solving these concerns of LMR cathodes over the past decade by following three classes of strategies:morphology design,bulk design,and surface modification.We elaborate on the processing procedures,electrochemical performance,mechanisms,and limitations of each approach,and finally put forward the concerns left and the possible solutions for the commercialization of LMR cathodes.
基金supported by the National Research Foundation of Korea grant funded by the Korea government (NRF2021R1A2C1014280)the Fundamental Research Program of the Korea Institute of Material Science (PNK9370)。
文摘Oxygen redox is considered a new paradigm for increasing the practical capacity and energy density of the layered oxide cathodes for Na-ion batteries. However, severe local structural changes and phase transitions during anionic redox reactions lead to poor electrochemical performance with sluggish kinetics.Here, we propose a synergy of Li-Cu cations in harnessing the full potential of oxygen redox, through Li displacement and suppressed phase transition in P3-type layered oxide cathode. P3-type Na_(0.7)[Li_(0.1)Cu_(0.2)Mn_(0.7)]O_(2) cathode delivers a large specific capacity of ~212 mA h g^(-1)at 15 mA g^(-1). The discharge capacity is maintained up to ~90% of the initial capacity after 100 cycles, with stable occurrence of the oxygen redox in the high-voltage region. Through advanced experimental analyses and first-principles calculations, it is confirmed that a stepwise redox reaction based on Cu and O ions occurs for the charge-compensation mechanism upon charging. Based on a concrete understanding of the reaction mechanism, the Li displacement by the synergy of Li-Cu cations plays a crucial role in suppressing the structural change of the P3-type layered material under the oxygen redox reaction, and it is expected to be an effective strategy for stabilizing the oxygen redox in the layered oxides of Na-ion batteries.
基金funding supports from the National Key R&D Program of China(Grant Nos.2022YFB2404400 and 2019YFA0308500)Beijing Natural Science Foundation(Z190010)National Natural Science Foundation of China(Grant Nos.51991344,52025025,52072400,and 52002394)。
文摘Understanding the structural origin of the competition between oxygen 2p and transition-metal 3d orbitals in oxygen-redox(OR)layered oxides is eminently desirable for exploring reversible and high-energy-density Li/Na-ion cathodes.Here,we reveal the correlation between cationic ordering transition and OR degradation in ribbon-ordered P3-Na_(0.6)Li_(0.2)Mn_(0.8)O_(2) via in situ structural analysis.Comparing two different voltage windows,the OR capacity can be improved approximately twofold when suppressing the in-plane cationic ordering transition.We find that the intralayer cationic migration is promoted by electrochemical reduction from Mn^(4+)to Jahn–Teller Mn^(3+)and the concomitant NaO_(6) stacking transformation from triangular prisms to octahedra,resulting in the loss of ribbon ordering and electrochemical decay.First-principles calculations reveal that Mn^(4+)/Mn^(3+)charge ordering and alignment of the degenerate eg orbital induce lattice-level collective Jahn–Teller distortion,which favors intralayer Mn-ion migration and thereby accelerates OR degradation.These findings unravel the relationship between in-plane cationic ordering and OR reversibility and highlight the importance of superstructure protection for the rational design of reversible OR-active layered oxide cathodes.
基金supported by the National Natural Science Foundation of China(Grant Nos.52202282,52402054,22471283,and 52202327)Natural Science Foundation of Tianjin City(Grant Nos.22JCYBJC00040,24JCQNJC00970)。
文摘High-capacity O3-type layered NiFeMn-based oxides are promising cathodes for sodium-ion batteries,though their practical deployment is constrained by the inherent limitations of Fe redox chemistry.Traditional designs generally enforcing stoichiometric symmetry(Ni=Mn)yield low Fe redox activity.Herein,we propose a valence engineering strategy that breaks conventional Ni/Mn stoichiometry to reconfigure Fe's local chemical environment and unlock unprecedented redox depth.Density functional theory(DFT)calculations reveal that the designed NaNi_(0.35)Fe_(0.225)Mn_(0.425)O_(2)cathode exhibits a reduced Bader charge on Fe(1.598 vs.1.638 in NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2))and elevated Fe 3d orbital energy,signifying enhanced Fe redox activity.This configuration enables an exceptional Fe^(2.60+)/Fe^(3.88+)redox(1.28 e~-per Fe),delivering a reversible capacity of184.3 mAh g^(-1)within 2-4.2 V at 0.2 C,markedly exceeding the benchmark NaNi_(1/3)Fe_(1/3)Mn_(1/3)O_(2)(161.3 mAh g^(-1))with low reaction depth of Fe^(3.01+)/Fe^(3.61+).The intensified cationic redox reaction enables an ultrahigh energy density of 596 Whkg-1.The NaNi_(0.35)Fe_(0.225)Mn_(0.425)O_(2)cathode demonstrates robust performance over a broad temperature range from-15℃to 60℃.In situ and ex situ characterizations unveil a reversible O3■P3■OP2 phase transition with minimal volume change(1.88%)that circumvents detrimental deleterious O'3 intermediates and intragranular cracking.This work establishes valence engineering as a paradigm to consolidate cationic redox reaction in high-energy layered sodium oxide cathodes.
基金financially supported by the Basic Research Project of the Science and Technology Innovation Commission of Shenzhen(no.JCYJ20170412153139454)the National Natural Science Foundation of China(no.21875097)+1 种基金Natural Science Foundation of Guangdong Province(no.2018A030313725 and 2018B030322001)the Professorial and Doctoral Scientific Research Foundation of Huizhou University(no.2020JB025).
文摘Lithium-rich layered oxide cathodes have an advantage of high energy density.However,continuous capacity fading and voltage hysteresis have largely restricted their practical application.In this work,we investigated in depth the voltage-fading mechanism of Li-rich materials by in situ Raman spectroscopy,X-ray absorption near edge structure(XANES)spectroscopy,andhigh-resolution transmission electron microscopy(HRTEM).
基金financially supported by the National Key R&D Program of China(No.2023YFB3809503)the National Natural Science Foundation of China(Grant Nos.92472105,52002350,52471243)+1 种基金the Local Science and Technology Development Fund Projects Guided by the Central Government(2023ZY0022)partly funded by the German Research Foundation(DFG)under Project ID 390874152(POLiS Cluster of Excellence).
文摘Lithium-ion batteries(LIBs)drive the energy transition towards decarbonization by being widely deployed in almost every aspect of our daily life,ranging from portable electronics to e-vehicles and grid storage.In a typical LIB,Li-ions shuttle between the cathode and anode upon charging/discharging to store and release energy on demand with high round-trip efficiency.
基金supported by the National Natural Science Foundation of China(52402301,52472240,52202284)the Natural Science Foundation of Zhejiang Province(LQ23E020002)the Wenzhou Key Scientific and Technological Innovation Research Project(ZG2023053)。
文摘Sodium-ion batteries(SIBs)have garnered significant attentions for grid-scale energy storage due to the low cost and abundant sodium resources.Among the various cathode materials,sodium layered transition metal oxides(Na_(x)TMO_(2))are considered highly promising for practical applications of SIBs relying on their high theoretical capacities and facile syntheses.However,the poor air stability,sluggish interfacial kinetics,and detrimental phase transitions of Na_(x)TMO_(2) commonly result in unsatisfactory cycling stability as well as inferior rate capability.In this review,recent achievements and progress in interfacial regulations aimed at improving the air stability and electrochemical performances of Na_(x)TMO_(2),such as organic/inorganic coating,interfacial-coating-doping,and heterogeneous phase designing are summarized.Such approaches can not only enable the in-situ conversion of residual alkali and/or enhance the interfacial stability,but also improve the electrochemical reaction kinetics and mitigate phase evolutions.The structural stability enhancement mechanisms of Na_(x)TMO_(2) layered oxides resulted from surface reconstructions are profoundly discussed and the influences on their electrochemical properties are concluded in this work.Finally,we outlook the novel interfacial modification strategies like of layered-tunnel heterostructure building and organicinorganic co-coating.The state-of-the-art characterization techniques and artificial intelligence are also elaborated to develop high-performance Na_(x)TMO_(2) cathodes in the future.We believe that the insights presented in this review can serve as meaningful guidance for the interfacial modulations of Na_(x)TMO_(2) cathodes.
基金supported by Science and Technology Major Project of Guangxi(grant Number 1114022-15).
文摘O3-type layered oxides are among the most promising cathode candidates for sodium-ion batteries,yet their practical use is constrained by irreversible oxygen redox at high voltages,parasitic side reactions,and pronounced moisture sensitivity.Here,we propose a one-step H_(3)BO_(3) treatment that introduces an in-situ boride complex,enabling near-surface B doping and the formation of a conformal sodium borate interphase.The dual modification operates synergistically:B incorporation reinforces the layered framework and suppresses oxygen redox above 4.0 V,while the sodium borate layer,endowed with high Na+conductivity,functions as a robust interfacial barrier.These effects collectively suppress transition-metal dissolution,mitigate electrolyte decomposition,and promote rapid Na+transport.Benefiting from this design,the optimized cathode delivers 160.5 mAh g^(−1) at 0.1C and retains 85.3%capacity after 200 cycles at 1C.Moreover,the sodium borate coating effectively blocks H^(+)/H_(2)O ingress,conferring exceptional air stability.After 150 cycles,3-days-aged pristine cathode retains 4.7% of the fresh capacity,whereas optimized cathode maintains nearly pristine cycling stability.Even after seven days of exposure,only trace Na_(2)CO_(3) impurities are detected.This work establishes in situ boride complexes as a viable strategy to achieve electrochemically robust and moisture-tolerant sodium-ion cathodes for grid-scale energy storage.
