The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than prev...The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than previously reported for a recoverable nine-engine liquid-propellant rocket.Based on the Radiative Transfer Equation(RTE),this study employs the discrete transfer method to solve the transient RTE problem using physical properties to describe the problem while avoiding the need to directly solve mathematical equations.The proposed method can effectively determine the radiative heat flux of the flow field and is applicable to problems involving various geometries.Calculations reveal that during the ascent phase of the rocket,the radiative heat flux at the base of the vehicle reaches its maximum in the initial stages of the lift-off,reaching a maximum of~50 kW/m^(2),which is 2.24 times the maximum value during the return phase.During the deceleration stage of re-entry into the atmosphere,the maximum radiative heat flux recorded on the sidewall of the rocket is 29.1 kW/m^(2);the maximum heat flux on the bottom surface is approximately 22.3 kW/m^(2),accounting for 76.6%of that on the rocket's sidewall.This provides a basis for the thermal protection design of the rocket's bottom and walls as well as for the thermal management of cryogenic propellant tanks.Future research will involve ground engine testing and flight experiments to further validate the proposed model.展开更多
In the era of global space industry’s rapid expansion,reusable launch technology has the advantage of cost reduction,but makes launch frequency and flight reliability remain critical.This study proposes that Artifici...In the era of global space industry’s rapid expansion,reusable launch technology has the advantage of cost reduction,but makes launch frequency and flight reliability remain critical.This study proposes that Artificial Intelligence(AI)would be the potential disruptive technology to solve these challenges.AI enables transformative capabilities for launch vehicles which are pointed out in four domains:Agile launch operations enabling automate testing,fault diagnosis,and decision-making for targeting hour-level launch cycles and minute-level fault resolution;high-reliability flight enabling real-time autonomous fault diagnosis,mission replanning,and fault-tolerant control within seconds during anomalies,potentially improving reliability by 1–2 orders of magnitude;rapid maintenance enabling real-time health monitoring and lifespan prediction for swift relaunch decisions;efficient space traffic management enabling predict/resolve orbital conflicts amid growing congestion from satellites and debris.The key challenges for AI applications are analyzed as well,including multi-system coupling,uncertain failure modes and narrow flight corridors,limited sensor data,and massive heterogeneous data processing.Finally,the study also proposes that AI promises substantial efficiency gains in launch vehicle design,manufacturing,and testing through multidisciplinary optimization and reduced reliance on physical testing.展开更多
In recent years, Chinese Long March(LM) launchers have experienced several launch failures, most of which occurred in their propulsion systems, and this paper studies Autonomous Mission Reconstruction(AMRC) technology...In recent years, Chinese Long March(LM) launchers have experienced several launch failures, most of which occurred in their propulsion systems, and this paper studies Autonomous Mission Reconstruction(AMRC) technology to alleviate losses due to these failures. The status of the techniques related to AMRC, including trajectory and mission planning, guidance methods,and fault tolerant technologies, are reviewed, and their features are compared, which reflect the challenges faced by AMRC technology. After a brief introduction about the failure modes of engines that can occur during flight, and the fundamentals of trajectory planning and joint optimization of the target orbit and flight path, an AMRC algorithm is proposed for geostationary transfer orbit launch missions. The algorithm evaluates the residual performance onboard, and plans new objectives and corresponding flight path by iterative guidance mode or segmented state triggered optimization methods in real-time. Three failure scenarios that have occurred during previous LM missions are simulated to check the robustness of the algorithm: imminent explosion risk of the boosters’ engines, thrust drop during the first stage of flight, and being unable to start the engine during the second stage. The payloads would fall from space according to the current design under these conditions, but they were saved with the AMRC algorithm in the simulations, which allowed the rocket to get into the target orbit as intended or the payloads were deployed in other orbits without crashing. Although spaceflight can be very unforgiving, the AMRC algorithm has the potential to avoid the total loss of a launch mission when faced with these kinds of typical failures.展开更多
In this paper,an Uncertainty-based Multi-disciplinary Design Optimization (UMDO)method combining with fuzzy theory and Multi-Discipline Feasible (MDF) method is developed for the conceptual design of a Hybrid Rocket M...In this paper,an Uncertainty-based Multi-disciplinary Design Optimization (UMDO)method combining with fuzzy theory and Multi-Discipline Feasible (MDF) method is developed for the conceptual design of a Hybrid Rocket Motor (HRM) powered Launch Vehicle (LV).In the method proposed,membership functions are used to represent the uncertain factors,the fuzzy statistical experiment is introduced to analyze the propagation of uncertainties,and means,standard deviations and credibility measures are used to delineate uncertain responses.A geometric programming problem is solved to verify the feasibility of the Fuzzy-based Multi-Discipline Feasible(F-MDF) method.A multi-disciplinary analysis of a three-stage HRM powered LV involving the disciplines of propulsion,structure,aerodynamics and trajectory is implemented,and the mathematical models corresponding to the F-MDF method and the MDF method are established.A two-phase optimization method is proposed for multi-disciplinary design optimization of the LV,including the orbital capacity optimization phase based on the Ziolkowski formula,and the scheme trajectory verification phase based on the 3-degree-of-freedom point trajectory simulation.The correlation coefficients and the quadratic Response Surface Method (RSM) based on Latin Hypercube Sampling (LHS) are adopted for sensitive analysis of uncertain factors,and the Multi-Island Genetic Algorithm (MIGA) is adopted as the optimization algorithm.The results show that the F-MDF method is applicable in LV conceptual design,and the design with the F-MDF method is more reliable and robust than that with the MDF method.展开更多
This paper provides the formulation used for studing the cold and hot separating stages of a multistage launch vehicle. Monte Carlo simulation is employed to account for the off nominal design parameters of the bodies...This paper provides the formulation used for studing the cold and hot separating stages of a multistage launch vehicle. Monte Carlo simulation is employed to account for the off nominal design parameters of the bodies undergoing separation to evaluate the risk of failure for the separation event. All disturbances, effect of dynamic unbalance, residual thrust, separation disturbance caused by the separation mechanism and misalignment in cold and hot separation are analyzed to find out nonoccurrence of collision between the separation bodies. The results indicate that the current design satisfies the separation requirements.展开更多
This paper introduces the sea-launch technology of a cryogenic liquid-fueled medium-lift rocket.It first reviews the current state of sea launch technology,and then gives a brief introduction of China’s New Generatio...This paper introduces the sea-launch technology of a cryogenic liquid-fueled medium-lift rocket.It first reviews the current state of sea launch technology,and then gives a brief introduction of China’s New Generation Medium-lift Launch Vehicle(NGMLV).The innovations in the NGMVL,such as responsive test and launch control,a H3 launch model,and unmanned operations,provide convenience for sea launches.Based on these innovations,this paper proposes a sea launch scheme,including the system configuration,test and launch processes,and an improved adaptive design for the rocket.Then,the launch platform is discussed in detail,which integrates the functions of sea transportation,assembly and test,as well as technical and launch areas.The layout and function divisions,fluid filling,gas supply and distribution systems,and lossless storage technology of LH2 are described in order.This breakthrough in sea launch technology will enable China to launch medium and large satellites and constellations‘both on land and sea’,especially into low-inclination Low-Earth Orbits(LEOs),and it allows China to remain competitive in the fast-paced space industry.展开更多
In this paper, the attitude tracking and load relief control problems against wind disturbances and uncertain aerodynamics as well as the engine thrust of launch vehicles are studied.Firstly, a framework of Compensate...In this paper, the attitude tracking and load relief control problems against wind disturbances and uncertain aerodynamics as well as the engine thrust of launch vehicles are studied.Firstly, a framework of Compensated Acceleration Feedback based Active Disturbance Rejection Control(CAF-ADRC) is established to achieve both desired attitude tracking and load relief performances. In particular, the total disturbance that includes the effects caused by both aerocoefficient perturbations and disturbances is estimated by constructing an Extended State Observer(ESO) to achieve attitude tracking. Furthermore, combined with the normal acceleration due to the engine thrust, the accelerometer measurement is also compensated to enhance the load relief effect.Secondly, the quantitative analysis of ESO and the entire closed-loop system are studied. It can be concluded that the desired attitude tracking and load relief performances can be achieved simultaneously under the proposed approach. Besides, tuning laws of the proposed approach are systematically given, which are divided into ESO, Proportional Derivative(PD) and Compensated Acceleration Feedback(CAF) modules. Moreover, the performances under CAF-ADRC approach can be better than those under CAF based PD(CAF-PD) approach by tuning load relief gain.Finally, the approach presented is applied to a typical control problem of launch vehicles with wind disturbances and parameter uncertainties.展开更多
Satellite launch vehicle lies at the cross-road of multiple challenging technologies and its design and optimization present a typical example of multidisciplinary design and optimization（MDO） process.The complexity...Satellite launch vehicle lies at the cross-road of multiple challenging technologies and its design and optimization present a typical example of multidisciplinary design and optimization（MDO） process.The complexity of problem demands highly effi-cient and effective algorithm that can optimize the design.Hyper heuristic approach（HHA） based on meta-heuristics is applied to the optimization of air launched satellite launch vehicle（ASLV）.A non-learning random function（NLRF） is proposed to con-trol low-level meta-heuristics（LLMHs） that increases certainty of global solution,an essential ingredient required in product conceptual design phase of aerospace systems.Comprehensive empirical study is performed to evaluate the performance advan-tages of proposed approach over popular non-gradient based optimization methods.Design of ASLV encompasses aerodynamics,propulsion,structure,stages layout,mass distribution,and trajectory modules connected by multidisciplinary feasible design approach.This approach formulates explicit system-level goals and then forwards the design optimization process entirely over to optimizer.This distinctive approach for launch vehicle system design relieves engineers from tedious,iterative task and en-ables them to improve their component level models.Mass is an impetus on vehicle performance and cost,and so it is considered as the core of vehicle design process.Therefore,gross launch mass is to be minimized in HHA.展开更多
The reusable launch vehicle (RLV) presents a new avenue for reducing cost of space transportation. The landing mechanism, which provides landing support and impact absorption, is a vital component of the RLV at final ...The reusable launch vehicle (RLV) presents a new avenue for reducing cost of space transportation. The landing mechanism, which provides landing support and impact absorption, is a vital component of the RLV at final stage of recovery. This study proposes a novel legged deployable landing mechanism (LDLM) for RLV. The Watt-II six-bar mechanism is adopted to obtain the preferred configuration via the application of the linkage variation approach. To endow the proposed LDLM with advantages of large landing support region, lightweight, and reasonable linkage internal forces, a multi-objective optimization paradigm is developed. Furthermore, the optimal scale parameters for guiding the LDLM prototype design is obtained numerically using the non-dominated sorting genetic algorithm-II (NSGA-II) evolutionary algorithm. A fully-functional scaled RLV prototype is developed by integrating the gravity-governed deploying scheme to facilitate unfolding action to avoid full-range actuation, a dual-backup locking mechanism to enhance reliability of structure stiffening as fully deployed, and a shock absorber (SA) with multistage honeycomb to offer reliable shock absorbing performance. The experimental results demonstrate that the proposed LDLM is capable of providing rapid and smooth deployment (duration less than 1.5 s) with mild posture disturbance to the cabin (yaw and pitch fluctuations less than 6°). In addition, it provides satisfactory impact attenuation (acceleration peak less than 10g (g is the gravitational acceleration)) in the 0.2 m freefall test, which makes the proposed LDLM a potential alternative for developing future RLV archetype.展开更多
A novel adaptive fault-tolerant control scheme in the differential algebraic framework was proposed for attitude control of a heavy lift launch vehicle （HLLV）. By using purely mathematical transformations, the decou...A novel adaptive fault-tolerant control scheme in the differential algebraic framework was proposed for attitude control of a heavy lift launch vehicle （HLLV）. By using purely mathematical transformations, the decoupled input-output representations of HLLV were derived, rendering three decoupled second-order systems, i.e., pitch, yaw and roll channels. Based on a new type of numerical differentiator, a differential algebraic observer （DAO） was proposed for estimating the system states and the generalized disturbances, including various disturbances and additive fault torques. Driven by DAOs, three improved proportional-integral- differential （PID） controllers with disturbance compensation were designed for pitch, yaw and roll control. All signals in the closed-loop system were guaranteed to be ultimately uniformly bounded by utilization of Lyapunov＇s indirect method. The convincing numerical simulations indicate that the proposed control scheme is successful in achieving high performance in the presence of parametric perturbations, external disturbances, noisy corruptions, and actuator faults.展开更多
This paper illustrates the dynamic modeling,experimental validation of Reusable Launch Vehicle under symmetric landing mode.Firstly,a new quasi-3D dynamic landing model of vehicle under 2-2 and 1-2-1 symmetric landing...This paper illustrates the dynamic modeling,experimental validation of Reusable Launch Vehicle under symmetric landing mode.Firstly,a new quasi-3D dynamic landing model of vehicle under 2-2 and 1-2-1 symmetric landing mode is established,which can predict the plane motion of the main body and the spatial motion of landing struts and footpads.The strut force,footpad-ground contact force and the liquid spring damper are also included in the model.Secondly,the landing impact experiments are performed for 2-2 and 1-2-1 symmetric landing mode.The main and auxiliary strut force are obtained,along with the force-stroke diagram of damper.By comparing with experimental data,the accuracy of simulation model is verified.It is found that the simulation model possesses good match with tested responses in damping stroke and main strut force.The simulation and experiment also indicate the same trend in auxiliary strut force and main body acceleration.The main discrepancies attribute to the simplified structural flexibility and nonlinear contact。展开更多
To be close to the practical flight process and increase the precision of optimal trajectory, a six-degree-offreedom（6-DOF） trajectory is optimized for the reusable launch vehicle（RLV） using the Gauss pseudospectr...To be close to the practical flight process and increase the precision of optimal trajectory, a six-degree-offreedom（6-DOF） trajectory is optimized for the reusable launch vehicle（RLV） using the Gauss pseudospectral method（GPM）. Different from the traditional trajectory optimization problem which generally considers the RLV as a point mass, the coupling between translational dynamics and rotational dynamics is taken into account. An optimization problem is formulated to minimize a performance index subject to 6-DOF equations of motion, including translational and rotational dynamics. A two-step optimal strategy is then introduced to reduce the large calculations caused by multiple variables and convergence confinement in 6-DOF trajectory optimization. The simulation results demonstrate that the 6-DOF trajectory optimal strategy for RLV is feasible.展开更多
Reentry attitude control for reusable launch vehicles （RLVs） is challenging due to the characters of fast nonlinear dy- namics and large flight envelop. A hierarchical structured attitude control system for an RLV i...Reentry attitude control for reusable launch vehicles （RLVs） is challenging due to the characters of fast nonlinear dy- namics and large flight envelop. A hierarchical structured attitude control system for an RLV is proposed and an unpowered RLV con- trol model is developed. Then, the hierarchical structured control frame consisting of attitude controller, compound control strategy and control allocation is presented. At the core of the design is a robust adaptive control （RAC） law based on dual loop time-scale separation. A radial basis function neural network （RBFNN） is implemented for compensation of uncertain model dynamics and external disturbances in the inner loop. And then the robust op- timization is applied in the outer loop to guarantee performance robustness. The overall control design frame retains the simplicity in design while simultaneously assuring the adaptive and robust performance. The hierarchical structured robust adaptive con- troller （HSRAC） incorporates flexibility into the design with regard to controller versatility to various reentry mission requirements. Simulation results show that the improved tracking performance is achieved by means of RAC.展开更多
In the process of stage separation of recoverable liquid launch vehicles,because of the large amount of residual fuel in the storage tanks,the influence of liquid sloshing on separation safety must be considered.Consi...In the process of stage separation of recoverable liquid launch vehicles,because of the large amount of residual fuel in the storage tanks,the influence of liquid sloshing on separation safety must be considered.Considering calculation simplicity and operation practicability,the Moving Pulsating Ball Model(MPBM)of large amplitude liquid sloshing is introduced into the calculation of launch vehicle stage separation.Combining the dynamic equation of the model with the energy relationship during"breathing movement",the formula calculating the force of liquid on the rigid body is derived.Compared with the calculations of commercial CFD calculation software,the accuracy of MPBM model is verified.Then,all the external forces and moments are applied to the rigid body of the stages,so that the translational and rotational dynamic equations of the stages are obtained respectively.According to the relative position of the two stages,the geometric shape of the interstage section and the engine of the second stage,the minimum clearance in the separation process can be decided to guarantee that the separation process is safe.展开更多
Dynamic modeling and active control of a strap-on launch vehicle are studied in this paper. In the dynamic modeling, the double-compatible free-interface modal synthesis method is used to establish dynamic model of th...Dynamic modeling and active control of a strap-on launch vehicle are studied in this paper. In the dynamic modeling, the double-compatible free-interface modal synthesis method is used to establish dynamic model of the system, and its model precision is compared with those of finite element method(FEM), fixedinterface modal synthesis method and free-interface modal synthesis method. In the active control, the swing angle of rocket motor is used as design variable, and the control law design based on the model of mass center motion is adopted to validate the system. Simulation results indicate that the double-compatible model synthesis method can properly approximate the FEM which is used as the benchmark solution, and the model precision of the double-compatible modal synthesis method is obviously higher than those of the fixed-interface and freeinterface modal synthesis methods. Based on the control law design, the deflection of mass center of the launch vehicle is very small.展开更多
A liquid launch vehicle is an important carrier in aviation,and its regular operation is essential to maintain space security.In the safety assessment of fluid launch vehicle body structure,it is necessary to ensure t...A liquid launch vehicle is an important carrier in aviation,and its regular operation is essential to maintain space security.In the safety assessment of fluid launch vehicle body structure,it is necessary to ensure that the assessmentmodel can learn self-response rules from various uncertain data and not differently to provide a traceable and interpretable assessment process.Therefore,a belief rule base with interpretability(BRB-i)assessment method of liquid launch vehicle structure safety status combines data and knowledge.Moreover,an innovative whale optimization algorithm with interpretable constraints is proposed.The experiments are carried out based on the liquid launch vehicle safety experiment platform,and the information on the safety status of the liquid launch vehicle is obtained by monitoring the detection indicators under the simulation platform.The MSEs of the proposed model are 3.8000e-03,1.3000e-03,2.1000e-03,and 1.8936e-04 for 25%,45%,65%,and 84%of the training samples,respectively.It can be seen that the proposed model also shows a better ability to handle small sample data.Meanwhile,the belief distribution of the BRB-i model output has a high fitting trend with the belief distribution of the expert knowledge settings,which indicates the interpretability of the BRB-i model.Experimental results show that,compared with other methods,the BRB-i model guarantees the model’s interpretability and the high precision of experimental results.展开更多
An autonomous approach and landing（A＆L） guidance law is presented in this paper for landing an unpowered reusable launch vehicle（RLV） at the designated runway touchdown. Considering the full nonlinear point-mass ...An autonomous approach and landing（A＆L） guidance law is presented in this paper for landing an unpowered reusable launch vehicle（RLV） at the designated runway touchdown. Considering the full nonlinear point-mass dynamics, a guidance scheme is developed in threedimensional space. In order to guarantee a successful A＆L movement, the multiple sliding surfaces guidance（MSSG） technique is applied to derive the closed-loop guidance law, which stems from higher order sliding mode control theory and has advantage in the finite time reaching property.The global stability of the proposed guidance approach is proved by the Lyapunov-based method.The designed guidance law can generate new trajectories on-line without any specific requirement on off-line analysis except for the information on the boundary conditions of the A＆L phase and instantaneous states of the RLV. Therefore, the designed guidance law is flexible enough to target different touchdown points on the runway and is capable of dealing with large initial condition errors resulted from the previous flight phase. Finally, simulation results show the effectiveness of the proposed guidance law in different scenarios.展开更多
The Long March 2 F(LM-2F) launch vehicle, the only launch vehicle designed for manned space flight in China, successfully launched the Tiangong 2 space laboratory and the Shenzhou 11 manned spaceship into orbits in 20...The Long March 2 F(LM-2F) launch vehicle, the only launch vehicle designed for manned space flight in China, successfully launched the Tiangong 2 space laboratory and the Shenzhou 11 manned spaceship into orbits in 2016 respectively. In this study, it introduces the technological improvements for enhancing the reliability of the LM-2F launch vehicle in the aspects of general technology, control system, manufacture and ground support system. The LM-2F launch vehicle will continue to provide more contributions to the Chinese Space Station Project with its high reliability and 100% success rate.展开更多
This paper first introduces the technical requirements for autonomous flight, with a brief review of the International Academy of Astronautics(IAA) study group, "autonomous dynamic trajectory optimization control...This paper first introduces the technical requirements for autonomous flight, with a brief review of the International Academy of Astronautics(IAA) study group, "autonomous dynamic trajectory optimization control of launch vehicle". Two research scenarios, ascent rescue and powered descent, are compared from the viewpoint of optimal control. On this basis, the technologies on the autonomous trajectory planning and control under the thrust-drop failures in the ascending phase, and the autonomous guidance method during the powered landing for the recovery of the rockets are discussed respectively. For the ascending problem, the characteristics of different solutions, including the iterative guidance method(IGM)-based residual carrying capacity evaluation, the state-triggered indices(STI), the joint planning with the payload’s performance, and the multiple graded optimization(MGO), are analyzed for comparison. For the landing problem, the challenges such as the feasible region reduction caused by high thrust weight ratio(HTWR) and the disturbance adaptability brought by the limited feasible region, are studied in detail, as well as the onboard planning demonstration flight in China are introduced. Finally, the foundations supporting the above methods are summarized, which play an important role in promoting the flight autonomy.展开更多
文摘The radiative heat flux of the plume from reusable rockets is a critical parameter during the launch and return processes.This paper proposes a method for calculating radiative heat flux with higher accuracy than previously reported for a recoverable nine-engine liquid-propellant rocket.Based on the Radiative Transfer Equation(RTE),this study employs the discrete transfer method to solve the transient RTE problem using physical properties to describe the problem while avoiding the need to directly solve mathematical equations.The proposed method can effectively determine the radiative heat flux of the flow field and is applicable to problems involving various geometries.Calculations reveal that during the ascent phase of the rocket,the radiative heat flux at the base of the vehicle reaches its maximum in the initial stages of the lift-off,reaching a maximum of~50 kW/m^(2),which is 2.24 times the maximum value during the return phase.During the deceleration stage of re-entry into the atmosphere,the maximum radiative heat flux recorded on the sidewall of the rocket is 29.1 kW/m^(2);the maximum heat flux on the bottom surface is approximately 22.3 kW/m^(2),accounting for 76.6%of that on the rocket's sidewall.This provides a basis for the thermal protection design of the rocket's bottom and walls as well as for the thermal management of cryogenic propellant tanks.Future research will involve ground engine testing and flight experiments to further validate the proposed model.
基金supported by the National Natural Science Foundation of China(Nos.52495000 and 52332012).
文摘In the era of global space industry’s rapid expansion,reusable launch technology has the advantage of cost reduction,but makes launch frequency and flight reliability remain critical.This study proposes that Artificial Intelligence(AI)would be the potential disruptive technology to solve these challenges.AI enables transformative capabilities for launch vehicles which are pointed out in four domains:Agile launch operations enabling automate testing,fault diagnosis,and decision-making for targeting hour-level launch cycles and minute-level fault resolution;high-reliability flight enabling real-time autonomous fault diagnosis,mission replanning,and fault-tolerant control within seconds during anomalies,potentially improving reliability by 1–2 orders of magnitude;rapid maintenance enabling real-time health monitoring and lifespan prediction for swift relaunch decisions;efficient space traffic management enabling predict/resolve orbital conflicts amid growing congestion from satellites and debris.The key challenges for AI applications are analyzed as well,including multi-system coupling,uncertain failure modes and narrow flight corridors,limited sensor data,and massive heterogeneous data processing.Finally,the study also proposes that AI promises substantial efficiency gains in launch vehicle design,manufacturing,and testing through multidisciplinary optimization and reduced reliance on physical testing.
基金co-supported by International Academy of Astronautics (IAA) study group SG 3.32the National Natural Science Foundation of China (No. 61773341)
文摘In recent years, Chinese Long March(LM) launchers have experienced several launch failures, most of which occurred in their propulsion systems, and this paper studies Autonomous Mission Reconstruction(AMRC) technology to alleviate losses due to these failures. The status of the techniques related to AMRC, including trajectory and mission planning, guidance methods,and fault tolerant technologies, are reviewed, and their features are compared, which reflect the challenges faced by AMRC technology. After a brief introduction about the failure modes of engines that can occur during flight, and the fundamentals of trajectory planning and joint optimization of the target orbit and flight path, an AMRC algorithm is proposed for geostationary transfer orbit launch missions. The algorithm evaluates the residual performance onboard, and plans new objectives and corresponding flight path by iterative guidance mode or segmented state triggered optimization methods in real-time. Three failure scenarios that have occurred during previous LM missions are simulated to check the robustness of the algorithm: imminent explosion risk of the boosters’ engines, thrust drop during the first stage of flight, and being unable to start the engine during the second stage. The payloads would fall from space according to the current design under these conditions, but they were saved with the AMRC algorithm in the simulations, which allowed the rocket to get into the target orbit as intended or the payloads were deployed in other orbits without crashing. Although spaceflight can be very unforgiving, the AMRC algorithm has the potential to avoid the total loss of a launch mission when faced with these kinds of typical failures.
基金supported by National Natural Science Foundation of China (No. 51305014)
文摘In this paper,an Uncertainty-based Multi-disciplinary Design Optimization (UMDO)method combining with fuzzy theory and Multi-Discipline Feasible (MDF) method is developed for the conceptual design of a Hybrid Rocket Motor (HRM) powered Launch Vehicle (LV).In the method proposed,membership functions are used to represent the uncertain factors,the fuzzy statistical experiment is introduced to analyze the propagation of uncertainties,and means,standard deviations and credibility measures are used to delineate uncertain responses.A geometric programming problem is solved to verify the feasibility of the Fuzzy-based Multi-Discipline Feasible(F-MDF) method.A multi-disciplinary analysis of a three-stage HRM powered LV involving the disciplines of propulsion,structure,aerodynamics and trajectory is implemented,and the mathematical models corresponding to the F-MDF method and the MDF method are established.A two-phase optimization method is proposed for multi-disciplinary design optimization of the LV,including the orbital capacity optimization phase based on the Ziolkowski formula,and the scheme trajectory verification phase based on the 3-degree-of-freedom point trajectory simulation.The correlation coefficients and the quadratic Response Surface Method (RSM) based on Latin Hypercube Sampling (LHS) are adopted for sensitive analysis of uncertain factors,and the Multi-Island Genetic Algorithm (MIGA) is adopted as the optimization algorithm.The results show that the F-MDF method is applicable in LV conceptual design,and the design with the F-MDF method is more reliable and robust than that with the MDF method.
文摘This paper provides the formulation used for studing the cold and hot separating stages of a multistage launch vehicle. Monte Carlo simulation is employed to account for the off nominal design parameters of the bodies undergoing separation to evaluate the risk of failure for the separation event. All disturbances, effect of dynamic unbalance, residual thrust, separation disturbance caused by the separation mechanism and misalignment in cold and hot separation are analyzed to find out nonoccurrence of collision between the separation bodies. The results indicate that the current design satisfies the separation requirements.
基金supported by the Research on Design Technology of Sea Launch and Recovery Platform(Ship),one High Tech Research Project of MIIT,China。
文摘This paper introduces the sea-launch technology of a cryogenic liquid-fueled medium-lift rocket.It first reviews the current state of sea launch technology,and then gives a brief introduction of China’s New Generation Medium-lift Launch Vehicle(NGMLV).The innovations in the NGMVL,such as responsive test and launch control,a H3 launch model,and unmanned operations,provide convenience for sea launches.Based on these innovations,this paper proposes a sea launch scheme,including the system configuration,test and launch processes,and an improved adaptive design for the rocket.Then,the launch platform is discussed in detail,which integrates the functions of sea transportation,assembly and test,as well as technical and launch areas.The layout and function divisions,fluid filling,gas supply and distribution systems,and lossless storage technology of LH2 are described in order.This breakthrough in sea launch technology will enable China to launch medium and large satellites and constellations‘both on land and sea’,especially into low-inclination Low-Earth Orbits(LEOs),and it allows China to remain competitive in the fast-paced space industry.
基金supported by the National Key R&D Program of China (No. 2022YFA1004703)the National Natural Science Foundation of China (Nos. 62122083 and 62103014)Chinese Academy of Sciences Youth Innovation Promotion Association (No. 2021003)。
文摘In this paper, the attitude tracking and load relief control problems against wind disturbances and uncertain aerodynamics as well as the engine thrust of launch vehicles are studied.Firstly, a framework of Compensated Acceleration Feedback based Active Disturbance Rejection Control(CAF-ADRC) is established to achieve both desired attitude tracking and load relief performances. In particular, the total disturbance that includes the effects caused by both aerocoefficient perturbations and disturbances is estimated by constructing an Extended State Observer(ESO) to achieve attitude tracking. Furthermore, combined with the normal acceleration due to the engine thrust, the accelerometer measurement is also compensated to enhance the load relief effect.Secondly, the quantitative analysis of ESO and the entire closed-loop system are studied. It can be concluded that the desired attitude tracking and load relief performances can be achieved simultaneously under the proposed approach. Besides, tuning laws of the proposed approach are systematically given, which are divided into ESO, Proportional Derivative(PD) and Compensated Acceleration Feedback(CAF) modules. Moreover, the performances under CAF-ADRC approach can be better than those under CAF based PD(CAF-PD) approach by tuning load relief gain.Finally, the approach presented is applied to a typical control problem of launch vehicles with wind disturbances and parameter uncertainties.
基金supported by National Natural Science Foundation of China(61425008,61333004,61273054)Top-Notch Young Talents Program of China,and Aeronautical Foundation of China(2015ZA51013)
文摘Satellite launch vehicle lies at the cross-road of multiple challenging technologies and its design and optimization present a typical example of multidisciplinary design and optimization（MDO） process.The complexity of problem demands highly effi-cient and effective algorithm that can optimize the design.Hyper heuristic approach（HHA） based on meta-heuristics is applied to the optimization of air launched satellite launch vehicle（ASLV）.A non-learning random function（NLRF） is proposed to con-trol low-level meta-heuristics（LLMHs） that increases certainty of global solution,an essential ingredient required in product conceptual design phase of aerospace systems.Comprehensive empirical study is performed to evaluate the performance advan-tages of proposed approach over popular non-gradient based optimization methods.Design of ASLV encompasses aerodynamics,propulsion,structure,stages layout,mass distribution,and trajectory modules connected by multidisciplinary feasible design approach.This approach formulates explicit system-level goals and then forwards the design optimization process entirely over to optimizer.This distinctive approach for launch vehicle system design relieves engineers from tedious,iterative task and en-ables them to improve their component level models.Mass is an impetus on vehicle performance and cost,and so it is considered as the core of vehicle design process.Therefore,gross launch mass is to be minimized in HHA.
文摘The reusable launch vehicle (RLV) presents a new avenue for reducing cost of space transportation. The landing mechanism, which provides landing support and impact absorption, is a vital component of the RLV at final stage of recovery. This study proposes a novel legged deployable landing mechanism (LDLM) for RLV. The Watt-II six-bar mechanism is adopted to obtain the preferred configuration via the application of the linkage variation approach. To endow the proposed LDLM with advantages of large landing support region, lightweight, and reasonable linkage internal forces, a multi-objective optimization paradigm is developed. Furthermore, the optimal scale parameters for guiding the LDLM prototype design is obtained numerically using the non-dominated sorting genetic algorithm-II (NSGA-II) evolutionary algorithm. A fully-functional scaled RLV prototype is developed by integrating the gravity-governed deploying scheme to facilitate unfolding action to avoid full-range actuation, a dual-backup locking mechanism to enhance reliability of structure stiffening as fully deployed, and a shock absorber (SA) with multistage honeycomb to offer reliable shock absorbing performance. The experimental results demonstrate that the proposed LDLM is capable of providing rapid and smooth deployment (duration less than 1.5 s) with mild posture disturbance to the cabin (yaw and pitch fluctuations less than 6°). In addition, it provides satisfactory impact attenuation (acceleration peak less than 10g (g is the gravitational acceleration)) in the 0.2 m freefall test, which makes the proposed LDLM a potential alternative for developing future RLV archetype.
基金Foundation item： Project（2012M521538） supported by China Postdoctoral Science Foundation Project suppolted by Postdoctoral Science Foundation of Central South University
文摘A novel adaptive fault-tolerant control scheme in the differential algebraic framework was proposed for attitude control of a heavy lift launch vehicle （HLLV）. By using purely mathematical transformations, the decoupled input-output representations of HLLV were derived, rendering three decoupled second-order systems, i.e., pitch, yaw and roll channels. Based on a new type of numerical differentiator, a differential algebraic observer （DAO） was proposed for estimating the system states and the generalized disturbances, including various disturbances and additive fault torques. Driven by DAOs, three improved proportional-integral- differential （PID） controllers with disturbance compensation were designed for pitch, yaw and roll control. All signals in the closed-loop system were guaranteed to be ultimately uniformly bounded by utilization of Lyapunov＇s indirect method. The convincing numerical simulations indicate that the proposed control scheme is successful in achieving high performance in the presence of parametric perturbations, external disturbances, noisy corruptions, and actuator faults.
基金co-supported by the National Natural Science Foundation of China(No.52102436)the Fundamental Research Funds for the Central Universities,China(No.30920021109)+3 种基金the Natural Science Foundation of Jiangsu Province,China(No.BK20200496)the China Postdoctoral Science Foundation(No.2020M681615)the Project of Key Laboratory of Impact and Safety Engineering(Ningbo University),Ministry of Education,China(No.CJ202107)the State Key Laboratory of Mechanics and Control of Mechanical Structures(Nanjing University of Aeronautics and Astronautics),China(No.MCMS-E-0221Y01).
文摘This paper illustrates the dynamic modeling,experimental validation of Reusable Launch Vehicle under symmetric landing mode.Firstly,a new quasi-3D dynamic landing model of vehicle under 2-2 and 1-2-1 symmetric landing mode is established,which can predict the plane motion of the main body and the spatial motion of landing struts and footpads.The strut force,footpad-ground contact force and the liquid spring damper are also included in the model.Secondly,the landing impact experiments are performed for 2-2 and 1-2-1 symmetric landing mode.The main and auxiliary strut force are obtained,along with the force-stroke diagram of damper.By comparing with experimental data,the accuracy of simulation model is verified.It is found that the simulation model possesses good match with tested responses in damping stroke and main strut force.The simulation and experiment also indicate the same trend in auxiliary strut force and main body acceleration.The main discrepancies attribute to the simplified structural flexibility and nonlinear contact。
基金supported by the National Basic Research Program of China(973 Program)(2012CB720003)the National Natural Science Foundation of China(10772011)
文摘To be close to the practical flight process and increase the precision of optimal trajectory, a six-degree-offreedom（6-DOF） trajectory is optimized for the reusable launch vehicle（RLV） using the Gauss pseudospectral method（GPM）. Different from the traditional trajectory optimization problem which generally considers the RLV as a point mass, the coupling between translational dynamics and rotational dynamics is taken into account. An optimization problem is formulated to minimize a performance index subject to 6-DOF equations of motion, including translational and rotational dynamics. A two-step optimal strategy is then introduced to reduce the large calculations caused by multiple variables and convergence confinement in 6-DOF trajectory optimization. The simulation results demonstrate that the 6-DOF trajectory optimal strategy for RLV is feasible.
基金supported by the National Natural Science Foundation of China(61174221)
文摘Reentry attitude control for reusable launch vehicles （RLVs） is challenging due to the characters of fast nonlinear dy- namics and large flight envelop. A hierarchical structured attitude control system for an RLV is proposed and an unpowered RLV con- trol model is developed. Then, the hierarchical structured control frame consisting of attitude controller, compound control strategy and control allocation is presented. At the core of the design is a robust adaptive control （RAC） law based on dual loop time-scale separation. A radial basis function neural network （RBFNN） is implemented for compensation of uncertain model dynamics and external disturbances in the inner loop. And then the robust op- timization is applied in the outer loop to guarantee performance robustness. The overall control design frame retains the simplicity in design while simultaneously assuring the adaptive and robust performance. The hierarchical structured robust adaptive con- troller （HSRAC） incorporates flexibility into the design with regard to controller versatility to various reentry mission requirements. Simulation results show that the improved tracking performance is achieved by means of RAC.
基金supported by the National Natural Science Foundation of China(Nos.12132002,12202044)。
文摘In the process of stage separation of recoverable liquid launch vehicles,because of the large amount of residual fuel in the storage tanks,the influence of liquid sloshing on separation safety must be considered.Considering calculation simplicity and operation practicability,the Moving Pulsating Ball Model(MPBM)of large amplitude liquid sloshing is introduced into the calculation of launch vehicle stage separation.Combining the dynamic equation of the model with the energy relationship during"breathing movement",the formula calculating the force of liquid on the rigid body is derived.Compared with the calculations of commercial CFD calculation software,the accuracy of MPBM model is verified.Then,all the external forces and moments are applied to the rigid body of the stages,so that the translational and rotational dynamic equations of the stages are obtained respectively.According to the relative position of the two stages,the geometric shape of the interstage section and the engine of the second stage,the minimum clearance in the separation process can be decided to guarantee that the separation process is safe.
基金the National Natural Science Foundation of China(Nos.11132001,11272202 and 11472171)the Key Scientific Project of Shanghai Municipal Education Commission(No.14ZZ021)the Natural Science Foundation of Shanghai(No.14ZR1421000)
文摘Dynamic modeling and active control of a strap-on launch vehicle are studied in this paper. In the dynamic modeling, the double-compatible free-interface modal synthesis method is used to establish dynamic model of the system, and its model precision is compared with those of finite element method(FEM), fixedinterface modal synthesis method and free-interface modal synthesis method. In the active control, the swing angle of rocket motor is used as design variable, and the control law design based on the model of mass center motion is adopted to validate the system. Simulation results indicate that the double-compatible model synthesis method can properly approximate the FEM which is used as the benchmark solution, and the model precision of the double-compatible modal synthesis method is obviously higher than those of the fixed-interface and freeinterface modal synthesis methods. Based on the control law design, the deflection of mass center of the launch vehicle is very small.
基金This work was supported in part by the Natural Science Foundation of China under Grant 62203461 and Grant 62203365in part by the Postdoctoral Science Foundation of China under Grant No.2020M683736,in part by the Teaching Reform Project of Higher Education in Heilongjiang Province under Grant Nos.SJGY20210456 and SJGY20210457in part by the Natural Science Foundation of Heilongjiang Province of China under Grant No.LH2021F038,and in part by the Graduate Academic Innovation Project of Harbin Normal University under Grant Nos.HSDSSCX2022-17,HSDSSCX2022-18 and HSDSSCX2022-19。
文摘A liquid launch vehicle is an important carrier in aviation,and its regular operation is essential to maintain space security.In the safety assessment of fluid launch vehicle body structure,it is necessary to ensure that the assessmentmodel can learn self-response rules from various uncertain data and not differently to provide a traceable and interpretable assessment process.Therefore,a belief rule base with interpretability(BRB-i)assessment method of liquid launch vehicle structure safety status combines data and knowledge.Moreover,an innovative whale optimization algorithm with interpretable constraints is proposed.The experiments are carried out based on the liquid launch vehicle safety experiment platform,and the information on the safety status of the liquid launch vehicle is obtained by monitoring the detection indicators under the simulation platform.The MSEs of the proposed model are 3.8000e-03,1.3000e-03,2.1000e-03,and 1.8936e-04 for 25%,45%,65%,and 84%of the training samples,respectively.It can be seen that the proposed model also shows a better ability to handle small sample data.Meanwhile,the belief distribution of the BRB-i model output has a high fitting trend with the belief distribution of the expert knowledge settings,which indicates the interpretability of the BRB-i model.Experimental results show that,compared with other methods,the BRB-i model guarantees the model’s interpretability and the high precision of experimental results.
基金co-supported by the National Natural Science Foundation of China (Nos. 51407011, 11372034, 11572035)
文摘An autonomous approach and landing（A＆L） guidance law is presented in this paper for landing an unpowered reusable launch vehicle（RLV） at the designated runway touchdown. Considering the full nonlinear point-mass dynamics, a guidance scheme is developed in threedimensional space. In order to guarantee a successful A＆L movement, the multiple sliding surfaces guidance（MSSG） technique is applied to derive the closed-loop guidance law, which stems from higher order sliding mode control theory and has advantage in the finite time reaching property.The global stability of the proposed guidance approach is proved by the Lyapunov-based method.The designed guidance law can generate new trajectories on-line without any specific requirement on off-line analysis except for the information on the boundary conditions of the A＆L phase and instantaneous states of the RLV. Therefore, the designed guidance law is flexible enough to target different touchdown points on the runway and is capable of dealing with large initial condition errors resulted from the previous flight phase. Finally, simulation results show the effectiveness of the proposed guidance law in different scenarios.
文摘The Long March 2 F(LM-2F) launch vehicle, the only launch vehicle designed for manned space flight in China, successfully launched the Tiangong 2 space laboratory and the Shenzhou 11 manned spaceship into orbits in 2016 respectively. In this study, it introduces the technological improvements for enhancing the reliability of the LM-2F launch vehicle in the aspects of general technology, control system, manufacture and ground support system. The LM-2F launch vehicle will continue to provide more contributions to the Chinese Space Station Project with its high reliability and 100% success rate.
文摘This paper first introduces the technical requirements for autonomous flight, with a brief review of the International Academy of Astronautics(IAA) study group, "autonomous dynamic trajectory optimization control of launch vehicle". Two research scenarios, ascent rescue and powered descent, are compared from the viewpoint of optimal control. On this basis, the technologies on the autonomous trajectory planning and control under the thrust-drop failures in the ascending phase, and the autonomous guidance method during the powered landing for the recovery of the rockets are discussed respectively. For the ascending problem, the characteristics of different solutions, including the iterative guidance method(IGM)-based residual carrying capacity evaluation, the state-triggered indices(STI), the joint planning with the payload’s performance, and the multiple graded optimization(MGO), are analyzed for comparison. For the landing problem, the challenges such as the feasible region reduction caused by high thrust weight ratio(HTWR) and the disturbance adaptability brought by the limited feasible region, are studied in detail, as well as the onboard planning demonstration flight in China are introduced. Finally, the foundations supporting the above methods are summarized, which play an important role in promoting the flight autonomy.
