To investigate the progressive fracture processes around a tunnel triggered by static stress and dynamic disturbance,experiments and numerical simulations were performed.The results show that the spatial distributions...To investigate the progressive fracture processes around a tunnel triggered by static stress and dynamic disturbance,experiments and numerical simulations were performed.The results show that the spatial distributions of acoustic emission(AE)events become very different as lateral pressure coefficients change.The combined effect of static stress and dynamic disturbance causes the damage around the tunnel,and initial stress conditions control the damage morphology.The blast disturbance cannot fundamentally change the damaged area but will deepen the extent of damage and accelerate the failure speed.The more significant the difference between the vertical and horizontal stresses is,the higher the impact on the tunnel by the dynamic disturbance is.The AE activity recovers to a relatively stable state within a short time after the blast and conforms to power-law characteristics.展开更多
Lateral solid mixing was investigated experimentally in the dense zone of a 900mm×100mm×5.2m rectangular circulating fluidized bed riser.Using heated tracer injection,the lateral solid dispersion was determ...Lateral solid mixing was investigated experimentally in the dense zone of a 900mm×100mm×5.2m rectangular circulating fluidized bed riser.Using heated tracer injection,the lateral solid dispersion was determined by measuring the temperature response at different lateral positions. Furthermore, a one-dimensional dispersion model,which describes the solid mixing in the dense zone,is presented.The experimental results were used to determine the lateral particle dispersion coefficient under various operating conditions. A correlation of dispersion coefficient with bed height, gas velocity,and particle size is also proposed.展开更多
Although the internal stress state of soils can be affected by repetitive loading,there are few studies evaluating the lateral stress(or K_(0))of soils under repetitive loading.This study investigates the changes in K...Although the internal stress state of soils can be affected by repetitive loading,there are few studies evaluating the lateral stress(or K_(0))of soils under repetitive loading.This study investigates the changes in K_(0) and directional shear wave velocity(V_(s))in samples of two granular materials with different particle shapes during repetitive loading.A modified oedometer cell equipped with bender elements and a diaphragm transducer was developed to measure the variations in the lateral stress and the shear wave velocity,under repetitive loading on the loading and unloading paths.The study produced the following results:(1)Repetitive loading on the loading path resulted in an increase in the K_(0) of test samples as a function of cyclic loading number(i),and(2)Repetitive loading on the unloading path resulted in a decrease in K_(0) according to i.The shear wave velocity ratio(i.e.V_(s)(HH)/V_(s)(VH),where the first and second letters in parentheses corresponds to the directions of wave propagation and particle motion,respectively,and V and H corresponds to the vertical and horizontal directions,respectively)according to i supports the experimental observations of this study.However,when the tested material was in lightly over-consolidated state,there was an increase in K_(0) during repetitive loading,indicating that it was the initial K_(0),rather than the loading path,which is responsible for the change in K_(0).The power model can capture the variation in the K_(0) of samples according to i.Notably,the K_(0)=1 line acts as the boundary between the increase and decrease in K_(0) under repetitive loading.展开更多
The safety of the initial support during the construction of inclined shafts in tunnels traversing through high-hydraulic-pressure surrounding rocks is paramount.This study examines a high-hydraulic-pressure inclined ...The safety of the initial support during the construction of inclined shafts in tunnels traversing through high-hydraulic-pressure surrounding rocks is paramount.This study examines a high-hydraulic-pressure inclined shaft of a tunnel in Western Sichuan Province to analyze the damage characteristics of the initial support and propose a radial drainage and decompression treatment method.Field monitoring was conducted to assess the load and deformation of the initial support structure,and on-site investigations identified the distribution of cracked areas.In addition,numerical simulations were performed to evaluate the force and deformation characteristics of the initial support structure,which were then compared with field observations for validation.The variations in the lateral pressure coefficient and water pressure were evaluated.The results revealed that damage was primarily concentrated in the shoulder,spring line,and knee areas,with the bending moment at the knee increasing by up to 66.9%.The application of the radial drainage and decompression treatment method effectively reduced water pressure loads on the initial support.Post-treatment analysis indicated significant reductions in axial force and bending moment,enhancing structural stability.These findings provide valuable insights for improving the safety and durability of initial support systems in inclined shafts of high-hydraulicpressure railroad tunnels.展开更多
During the development blasting of circular tunnels, the detonation of multiple blastholes arranged onconcentric circles induces a complex dynamic response in the surrounding rocks. This process involvesmultiple blast...During the development blasting of circular tunnels, the detonation of multiple blastholes arranged onconcentric circles induces a complex dynamic response in the surrounding rocks. This process involvesmultiple blast loadings, static stress unloadings, and stress redistributions. In this study, the dynamicstresses of the surrounding rocks during development blasting, considering multiple blasting-unloadingstages with exponential paths and triangular paths (linear simplified paths of exponential paths), aresolved based on the dynamic theory and the Fourier transform method. Then, a corresponding discreteelement model is established using particle flow code (PFC). The multiple-stage dynamic stress andfracture distribution under different in situ stress levels and lateral coefficients are investigated. Theoreticalresults indicate that the peak compressive stresses in the surrounding rocks induced by bothtriangular and exponential paths are equal, while the triangular path generates greater additional dynamictensile stresses, particularly in the circumferential direction, compared to the exponential path.Numerical results show that the exponential path causes less dynamic circumferential tensile damageand forms fewer radial fractures than the triangular path in the first few blast stages;conversely, itexacerbates the damage and instability in the final blasting-unloading stage and forms more circumferentialfractures. Furthermore, the in situ stress determines which of the two opposite effects isdominant. Therefore, when using overly simplified triangular paths to evaluate the stability of surroundingrocks, potential overestimation or underestimation caused by different failure mechanismsshould be considered. Specifically, under high horizontal and vertical stresses, the static stress redistributionwith layer-by-layer blasting suppresses dynamic circumferential tensile and radial compressivedamage. The damage evolution of surrounding rocks in multi-stage blasting under different in situstresses is summarized and classified according to the damage mechanism and characteristics, which canguide blasting and support design.展开更多
To minimize negative effects of geostress distribution on mining safety near the fault areas, the UPM40 triaxial geostress testing system was introduced to conduct in-situ geostress measurements at three sites and nin...To minimize negative effects of geostress distribution on mining safety near the fault areas, the UPM40 triaxial geostress testing system was introduced to conduct in-situ geostress measurements at three sites and nine points by the borehole stress-relief method. The results of strain?confining pressure curves show that rock masses at the three measuring sites exhibit comprehensive linear elasticity in spite of various fissures or cracks within rocks. Horizontal and vertical stress components distribute discrepantly near the fault areas, and the maximum lateral pressure coefficient is as high as 6.15. The maximum principle stress ranges from 8.01 to 14.93 MPa, and stress directions are in the range of N78.07°W?N17.55°W. Geostresses near fault areas are dominated by the horizontal tectonic stresses, while the lower values, compared to those under similar geological conditions are due to stress release by the fault. Additionally, the fault and shear stress nearby are partially responsible for asymmetric elongation and southwesterly migration of orebodies.展开更多
In this paper,the densely arrayed bonded particle model is proposed for simulation of granular materials with discrete element method(DEM)considering particle crushing.This model can solve the problem of pore calculat...In this paper,the densely arrayed bonded particle model is proposed for simulation of granular materials with discrete element method(DEM)considering particle crushing.This model can solve the problem of pore calculation after the grains are crushed,and reduce the producing time of specimen.In this work,several one-dimensional compressing simulations are carried out to investigate the effect of particle crushing on mechanical properties of granular materials under a wide range of stress.The results show that the crushing process of granular materials can be divided into four different stages according to er-logσy curves.At the end of the second stage,there exists a yield point,after which the physical and mechanical properties of specimens will change significantly.Under extremely high stress,particle crushing will wipe some initial information of specimens,and specimens with different initial gradings and void ratios present some similar characteristics.Particle crushing has great influence on grading,lateral pressure coefficient and compressibility of granular materials,and introduce extra irreversible volume deformation,which is necessary to be considered in modelling of granular materials in wide stress range.展开更多
Engineering disasters(e.g.rock slabbing and rockburst)of the tunnel groups induced by the transient excavation of an adjacent tunnel threaten the stability of the existing tunnel,especially for those excavated by usin...Engineering disasters(e.g.rock slabbing and rockburst)of the tunnel groups induced by the transient excavation of an adjacent tunnel threaten the stability of the existing tunnel,especially for those excavated by using the drill and blast tunneling(D&B).However,the dynamic response and failure mechanism of surrounding rocks of the existing tunnel caused by adjacent transient excavation are not clear due to the difficulty in conducting field tests and laboratory experiments.Therefore,a novel transient unloading experimental system for deep tunnel excavation was proposed in this study.The real stress path and the unloading rate can be reproduced by using this proposed system.The experiments were conducted for observing the dynamic response of the existing tunnel induced by adjacent transient excavation under different lateral pressure coefficients l(?0.4,0.6,0.8,1,1.2,1.4,1.6,1.8)with a polymethyl methacrylate(PMMA)specimen.The propagation of the impact wave and unloading surface wave was detected through the digital image correlation(DIC)analysis.The reflection of the unloading surface wave on the incident side of the existing tunnel(tunnel-E)was observed and analyzed.Moreover,the dynamic characteristics of the stress redistribution,the particle displacement and vibration velocity of surrounding rocks of tunnel-E were analyzed and summarized.In addition,the Mohr-Coulomb(MeC)failure criterion with tension cut-off was adopted to evaluate the stability of the existing tunnel under adjacent transient excavation.The results indicate that the incident side of the existing tunnel under the dynamic disturbance of transient excavation of an adjacent tunnel was more prone to fail,followed by the shadow side and the top/bottom side.展开更多
The most common apparatus used to investigate the load-deformation parameters of homogeneous fine-grained soils is a Casagrande-type oedometer. A typical Casagrande oedometer cell has an internal diameter of 76 mm and...The most common apparatus used to investigate the load-deformation parameters of homogeneous fine-grained soils is a Casagrande-type oedometer. A typical Casagrande oedometer cell has an internal diameter of 76 mm and a height of 19 mm.However, the dimensions of this kind of apparatus do not meet the requirements of some civil engineering applications like studying load-deformation characteristics of specimens with large-diameter particles such as granular materials or municipal solid waste materials. Therefore, it is decided to design and develop a large-scale oedometer with an internal diameter of 490 mm. The new apparatus provides the possibility to evaluate the load-deformation characteristics of soil specimens with different diameter to height ratios. The designed apparatus is able to measure the coefficient of lateral earth pressure at rest. The details and capabilities of the developed oedometer are provided and discussed. To study the performance and efficiency, a number of consolidation tests were performed on Firoozkoh No. 161 sand using the newly developed large scale oedometer made and also the 50 mm diameter Casagrande oedometer. Benchmark test results show that measured consolidation parameters by large scale oedometer are comparable to values measured by Casagrande type oedometer.展开更多
Aiming at prestressed anchor cable frame in the presence of reinforcement landslide problem, through the selection of test points, the paper study and tested soil pressure, frame internal force and prestress losses un...Aiming at prestressed anchor cable frame in the presence of reinforcement landslide problem, through the selection of test points, the paper study and tested soil pressure, frame internal force and prestress losses under prestressed anchor cable frame beam, reveal the law of internal force distribution, and provides a theory basis for the rational design of prestressed anchor cable in landslide.展开更多
Stroke is one of the most serious diseases that threaten human life and health.It is a major cause of death and disability in the clinic.New strategies for motor rehabilitation after stroke are undergoing exploration....Stroke is one of the most serious diseases that threaten human life and health.It is a major cause of death and disability in the clinic.New strategies for motor rehabilitation after stroke are undergoing exploration.We aimed to develop a novel artificial neural rehabilitation system,which integrates brain--computer interface(BCI)and functional electrical stimulation(FES)technologies,for limb motor function recovery after stroke.We conducted clinical trials(including controlled trials)in 32 patients with chronic stroke.Patients were randomly divided into the BCI-FES group and the neuromuscular electrical stimulation(NMES)group.The changes in outcome measures during intervention were compared between groups,and the trends of ERD values based on EEG were analyzed for BCI-FES group.Results showed that the increase in Fugl Meyer Assessment of the Upper Extremity(FMA-UE)and Kendall Manual Muscle Testing(Kendall MMT)scores of the BCI-FES group was significantly higher than that in the sham group,which indicated the practicality and superiority of the BCI-FES system in clinical practice.The change in the laterality coefficient(LC)values based onμ-ERD(ΔLCm-ERD)had high significant positive correlation with the change in FMA-UE(r=0.6093,P=0.012),which provides theoretical basis for exploring novel objective evaluation methods.展开更多
Understanding the distribution of in-situ stresses is extremely important in a wide range of fields such as oil and gas exploration and development, CO2 sequestration, borehole stability, and stress-related geohazards...Understanding the distribution of in-situ stresses is extremely important in a wide range of fields such as oil and gas exploration and development, CO2 sequestration, borehole stability, and stress-related geohazards assessment. In the present study, the in-situ stress distribution in the Linxing area of eastern Ordos Basin, China, was analyzed based on well tested parameters. The maximum horizontal principal stress （SHmax）, minimum horizontal principal stress （Shmin）, and vertical stress （Sv） were calculated, and they were linearly correlated with burial depth. In general, two types of in-situ stress fields were determined in the Linxing area： （i） the in-situ stress state followed the relation Sv 〉 Snmax 〉 Shmin in shallow layers with burial depths of less than about 940 m, indicating a normal faulting stress regime; （ii） the Snmax magnitude increased conspicuously and was greater than the Sv magnitude in deep layers with depths more than about 940 m, and the in-situ stress state followed the relation Snmax 〉 Sv 〉 Shmin, demonstrating a strike-slip faulting stress regime. The horizontal differential stress （Snmax-Shmtn） increased with burial depth, indicating that wellbore instability may be a potentially significant problem when drilling deep vertical wells. The lateral stress coefficient ranged from 0.73 to 1.08 with an average of 0.93 in the Linxing area. The coalbed methane （CBM） reservoir permeability was also analyzed. No obvious exponential relationship was found between coal permeability and effective in-situ stress magnitude. Coal permeability was relatively high under a larger effective in-situ stress magnitude. Multiple factors, including fracture development, contribute to the variation of CBM reservoir permeability in the Linxing area of eastern Ordos Basin.展开更多
基金Project(2017YFC0602904)supported by the National Key Research and Development Program of ChinaProject(51974059)supported by the National Natural Science Foundation of ChinaProject(N180115010)supported by the Fundamental Research Funds for the Central Universities,China。
文摘To investigate the progressive fracture processes around a tunnel triggered by static stress and dynamic disturbance,experiments and numerical simulations were performed.The results show that the spatial distributions of acoustic emission(AE)events become very different as lateral pressure coefficients change.The combined effect of static stress and dynamic disturbance causes the damage around the tunnel,and initial stress conditions control the damage morphology.The blast disturbance cannot fundamentally change the damaged area but will deepen the extent of damage and accelerate the failure speed.The more significant the difference between the vertical and horizontal stresses is,the higher the impact on the tunnel by the dynamic disturbance is.The AE activity recovers to a relatively stable state within a short time after the blast and conforms to power-law characteristics.
文摘Lateral solid mixing was investigated experimentally in the dense zone of a 900mm×100mm×5.2m rectangular circulating fluidized bed riser.Using heated tracer injection,the lateral solid dispersion was determined by measuring the temperature response at different lateral positions. Furthermore, a one-dimensional dispersion model,which describes the solid mixing in the dense zone,is presented.The experimental results were used to determine the lateral particle dispersion coefficient under various operating conditions. A correlation of dispersion coefficient with bed height, gas velocity,and particle size is also proposed.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(Grant No.RS-2023-00208844).
文摘Although the internal stress state of soils can be affected by repetitive loading,there are few studies evaluating the lateral stress(or K_(0))of soils under repetitive loading.This study investigates the changes in K_(0) and directional shear wave velocity(V_(s))in samples of two granular materials with different particle shapes during repetitive loading.A modified oedometer cell equipped with bender elements and a diaphragm transducer was developed to measure the variations in the lateral stress and the shear wave velocity,under repetitive loading on the loading and unloading paths.The study produced the following results:(1)Repetitive loading on the loading path resulted in an increase in the K_(0) of test samples as a function of cyclic loading number(i),and(2)Repetitive loading on the unloading path resulted in a decrease in K_(0) according to i.The shear wave velocity ratio(i.e.V_(s)(HH)/V_(s)(VH),where the first and second letters in parentheses corresponds to the directions of wave propagation and particle motion,respectively,and V and H corresponds to the vertical and horizontal directions,respectively)according to i supports the experimental observations of this study.However,when the tested material was in lightly over-consolidated state,there was an increase in K_(0) during repetitive loading,indicating that it was the initial K_(0),rather than the loading path,which is responsible for the change in K_(0).The power model can capture the variation in the K_(0) of samples according to i.Notably,the K_(0)=1 line acts as the boundary between the increase and decrease in K_(0) under repetitive loading.
基金supported by the National Natural Science Foundation of China(Grant Nos.42277165,41920104007)the Hubei Natural Science Foundation(Grant No.2023AFD217).
文摘The safety of the initial support during the construction of inclined shafts in tunnels traversing through high-hydraulic-pressure surrounding rocks is paramount.This study examines a high-hydraulic-pressure inclined shaft of a tunnel in Western Sichuan Province to analyze the damage characteristics of the initial support and propose a radial drainage and decompression treatment method.Field monitoring was conducted to assess the load and deformation of the initial support structure,and on-site investigations identified the distribution of cracked areas.In addition,numerical simulations were performed to evaluate the force and deformation characteristics of the initial support structure,which were then compared with field observations for validation.The variations in the lateral pressure coefficient and water pressure were evaluated.The results revealed that damage was primarily concentrated in the shoulder,spring line,and knee areas,with the bending moment at the knee increasing by up to 66.9%.The application of the radial drainage and decompression treatment method effectively reduced water pressure loads on the initial support.Post-treatment analysis indicated significant reductions in axial force and bending moment,enhancing structural stability.These findings provide valuable insights for improving the safety and durability of initial support systems in inclined shafts of high-hydraulicpressure railroad tunnels.
基金supported by the National Natural Science Foundation of China(Grant Nos.51927808 and 41630642)the Postgraduate Innovation Fund Project of Hunan Province(Grant No.CX20200242).
文摘During the development blasting of circular tunnels, the detonation of multiple blastholes arranged onconcentric circles induces a complex dynamic response in the surrounding rocks. This process involvesmultiple blast loadings, static stress unloadings, and stress redistributions. In this study, the dynamicstresses of the surrounding rocks during development blasting, considering multiple blasting-unloadingstages with exponential paths and triangular paths (linear simplified paths of exponential paths), aresolved based on the dynamic theory and the Fourier transform method. Then, a corresponding discreteelement model is established using particle flow code (PFC). The multiple-stage dynamic stress andfracture distribution under different in situ stress levels and lateral coefficients are investigated. Theoreticalresults indicate that the peak compressive stresses in the surrounding rocks induced by bothtriangular and exponential paths are equal, while the triangular path generates greater additional dynamictensile stresses, particularly in the circumferential direction, compared to the exponential path.Numerical results show that the exponential path causes less dynamic circumferential tensile damageand forms fewer radial fractures than the triangular path in the first few blast stages;conversely, itexacerbates the damage and instability in the final blasting-unloading stage and forms more circumferentialfractures. Furthermore, the in situ stress determines which of the two opposite effects isdominant. Therefore, when using overly simplified triangular paths to evaluate the stability of surroundingrocks, potential overestimation or underestimation caused by different failure mechanismsshould be considered. Specifically, under high horizontal and vertical stresses, the static stress redistributionwith layer-by-layer blasting suppresses dynamic circumferential tensile and radial compressivedamage. The damage evolution of surrounding rocks in multi-stage blasting under different in situstresses is summarized and classified according to the damage mechanism and characteristics, which canguide blasting and support design.
基金Projects(50934002,51104011)supported by the National Natural Science Foundation of ChinaProject(2012BAB08B02)supported by the National Key Technologies R&D Program during the 12th Five-year Plan of China
文摘To minimize negative effects of geostress distribution on mining safety near the fault areas, the UPM40 triaxial geostress testing system was introduced to conduct in-situ geostress measurements at three sites and nine points by the borehole stress-relief method. The results of strain?confining pressure curves show that rock masses at the three measuring sites exhibit comprehensive linear elasticity in spite of various fissures or cracks within rocks. Horizontal and vertical stress components distribute discrepantly near the fault areas, and the maximum lateral pressure coefficient is as high as 6.15. The maximum principle stress ranges from 8.01 to 14.93 MPa, and stress directions are in the range of N78.07°W?N17.55°W. Geostresses near fault areas are dominated by the horizontal tectonic stresses, while the lower values, compared to those under similar geological conditions are due to stress release by the fault. Additionally, the fault and shear stress nearby are partially responsible for asymmetric elongation and southwesterly migration of orebodies.
基金The authors wish to thank the National Natural Science Foundation of China(No.11772117)the Fundamental Research Funds for the Central Universities(No.2015B37414)+1 种基金Henan Scientific and Technical Project under Grant(No.192102310480)Key Scientific Research Project of Colleges and Universities in Henan Province(CN)(21B560015)for financial support.
文摘In this paper,the densely arrayed bonded particle model is proposed for simulation of granular materials with discrete element method(DEM)considering particle crushing.This model can solve the problem of pore calculation after the grains are crushed,and reduce the producing time of specimen.In this work,several one-dimensional compressing simulations are carried out to investigate the effect of particle crushing on mechanical properties of granular materials under a wide range of stress.The results show that the crushing process of granular materials can be divided into four different stages according to er-logσy curves.At the end of the second stage,there exists a yield point,after which the physical and mechanical properties of specimens will change significantly.Under extremely high stress,particle crushing will wipe some initial information of specimens,and specimens with different initial gradings and void ratios present some similar characteristics.Particle crushing has great influence on grading,lateral pressure coefficient and compressibility of granular materials,and introduce extra irreversible volume deformation,which is necessary to be considered in modelling of granular materials in wide stress range.
基金supported by the National Natural Science Foundation of China(Grant Nos.42141010,51879184 and 12172253).
文摘Engineering disasters(e.g.rock slabbing and rockburst)of the tunnel groups induced by the transient excavation of an adjacent tunnel threaten the stability of the existing tunnel,especially for those excavated by using the drill and blast tunneling(D&B).However,the dynamic response and failure mechanism of surrounding rocks of the existing tunnel caused by adjacent transient excavation are not clear due to the difficulty in conducting field tests and laboratory experiments.Therefore,a novel transient unloading experimental system for deep tunnel excavation was proposed in this study.The real stress path and the unloading rate can be reproduced by using this proposed system.The experiments were conducted for observing the dynamic response of the existing tunnel induced by adjacent transient excavation under different lateral pressure coefficients l(?0.4,0.6,0.8,1,1.2,1.4,1.6,1.8)with a polymethyl methacrylate(PMMA)specimen.The propagation of the impact wave and unloading surface wave was detected through the digital image correlation(DIC)analysis.The reflection of the unloading surface wave on the incident side of the existing tunnel(tunnel-E)was observed and analyzed.Moreover,the dynamic characteristics of the stress redistribution,the particle displacement and vibration velocity of surrounding rocks of tunnel-E were analyzed and summarized.In addition,the Mohr-Coulomb(MeC)failure criterion with tension cut-off was adopted to evaluate the stability of the existing tunnel under adjacent transient excavation.The results indicate that the incident side of the existing tunnel under the dynamic disturbance of transient excavation of an adjacent tunnel was more prone to fail,followed by the shadow side and the top/bottom side.
基金financial support provided by the Iran University of Science and Technology
文摘The most common apparatus used to investigate the load-deformation parameters of homogeneous fine-grained soils is a Casagrande-type oedometer. A typical Casagrande oedometer cell has an internal diameter of 76 mm and a height of 19 mm.However, the dimensions of this kind of apparatus do not meet the requirements of some civil engineering applications like studying load-deformation characteristics of specimens with large-diameter particles such as granular materials or municipal solid waste materials. Therefore, it is decided to design and develop a large-scale oedometer with an internal diameter of 490 mm. The new apparatus provides the possibility to evaluate the load-deformation characteristics of soil specimens with different diameter to height ratios. The designed apparatus is able to measure the coefficient of lateral earth pressure at rest. The details and capabilities of the developed oedometer are provided and discussed. To study the performance and efficiency, a number of consolidation tests were performed on Firoozkoh No. 161 sand using the newly developed large scale oedometer made and also the 50 mm diameter Casagrande oedometer. Benchmark test results show that measured consolidation parameters by large scale oedometer are comparable to values measured by Casagrande type oedometer.
文摘Aiming at prestressed anchor cable frame in the presence of reinforcement landslide problem, through the selection of test points, the paper study and tested soil pressure, frame internal force and prestress losses under prestressed anchor cable frame beam, reveal the law of internal force distribution, and provides a theory basis for the rational design of prestressed anchor cable in landslide.
基金This work was supported by the National Key Research and Development Program of China(No.2017YFB1300302)National Natural Science Foundation of China(Nos.81630051,91648122,and 81601565)Tianjin Key Technology R&D Program(Nos.17ZXRGGX00020 and 16ZXHLSY00270).
文摘Stroke is one of the most serious diseases that threaten human life and health.It is a major cause of death and disability in the clinic.New strategies for motor rehabilitation after stroke are undergoing exploration.We aimed to develop a novel artificial neural rehabilitation system,which integrates brain--computer interface(BCI)and functional electrical stimulation(FES)technologies,for limb motor function recovery after stroke.We conducted clinical trials(including controlled trials)in 32 patients with chronic stroke.Patients were randomly divided into the BCI-FES group and the neuromuscular electrical stimulation(NMES)group.The changes in outcome measures during intervention were compared between groups,and the trends of ERD values based on EEG were analyzed for BCI-FES group.Results showed that the increase in Fugl Meyer Assessment of the Upper Extremity(FMA-UE)and Kendall Manual Muscle Testing(Kendall MMT)scores of the BCI-FES group was significantly higher than that in the sham group,which indicated the practicality and superiority of the BCI-FES system in clinical practice.The change in the laterality coefficient(LC)values based onμ-ERD(ΔLCm-ERD)had high significant positive correlation with the change in FMA-UE(r=0.6093,P=0.012),which provides theoretical basis for exploring novel objective evaluation methods.
基金We would like to express our gratitude to the reviewers for offering constructive suggestions and comments which improved this manuscript in many aspects. This work was supported by the National Science and Technology Major Project （No. 2016ZX05066）, the National Natural Science Foundation of China （Grant Nos. 41702130, 41672149, and 41672146）, the Fundamental Research Funds for the Central Universities （2015XKZD07）, and Priority Academic Program Development of Jiangsu Higher Education Institutions （PAPD）.
文摘Understanding the distribution of in-situ stresses is extremely important in a wide range of fields such as oil and gas exploration and development, CO2 sequestration, borehole stability, and stress-related geohazards assessment. In the present study, the in-situ stress distribution in the Linxing area of eastern Ordos Basin, China, was analyzed based on well tested parameters. The maximum horizontal principal stress （SHmax）, minimum horizontal principal stress （Shmin）, and vertical stress （Sv） were calculated, and they were linearly correlated with burial depth. In general, two types of in-situ stress fields were determined in the Linxing area： （i） the in-situ stress state followed the relation Sv 〉 Snmax 〉 Shmin in shallow layers with burial depths of less than about 940 m, indicating a normal faulting stress regime; （ii） the Snmax magnitude increased conspicuously and was greater than the Sv magnitude in deep layers with depths more than about 940 m, and the in-situ stress state followed the relation Snmax 〉 Sv 〉 Shmin, demonstrating a strike-slip faulting stress regime. The horizontal differential stress （Snmax-Shmtn） increased with burial depth, indicating that wellbore instability may be a potentially significant problem when drilling deep vertical wells. The lateral stress coefficient ranged from 0.73 to 1.08 with an average of 0.93 in the Linxing area. The coalbed methane （CBM） reservoir permeability was also analyzed. No obvious exponential relationship was found between coal permeability and effective in-situ stress magnitude. Coal permeability was relatively high under a larger effective in-situ stress magnitude. Multiple factors, including fracture development, contribute to the variation of CBM reservoir permeability in the Linxing area of eastern Ordos Basin.
