[Objective] The research aimed to carry out numerical simulation on impact of land-surface process in a Meiyu front rainstorm.[Method] Based on the meso-scale atmospheric non-hydrostatic model GRAPES-Meso which couple...[Objective] The research aimed to carry out numerical simulation on impact of land-surface process in a Meiyu front rainstorm.[Method] Based on the meso-scale atmospheric non-hydrostatic model GRAPES-Meso which coupled with NOAH land-surface module,a Meiyu front rainstorm in Jianghuai basin during 6-8 July,2005 was simulated.Via sensitivity tests with and without land-surface process,the impact of land-surface process on Meiyu front rainstorm was studied.[Result] GRAPES-Meso which coupled with NOAH land-surface process could simulate daily variation characteristics of Meiyu front precipitation and atmospheric low-level southwest jet.The land-surface process could improve the simulations of precipitation initiation,intensity and distribution.The improvement of precipitation initiation simulation was especially obvious,which solved spin-up problem of model to some extent.When the land-atmosphere interaction wasn’t considered,the precipitation initiation of model was very slow.The intensity evolution of simulated precipitation was different from actual situation.Moreover,it couldn’t simulate daily variation characteristics of precipitation and southwest jet.[Conclusion] The land-surface process had important impact on Meiyu process in Jianghuai basin.展开更多
The Tibetan Plateau(TP) has powerful dynamics and thermal effects, which makes the interaction between its land and atmosphere significantly affect climate and environment in the regional or global area. By retrospect...The Tibetan Plateau(TP) has powerful dynamics and thermal effects, which makes the interaction between its land and atmosphere significantly affect climate and environment in the regional or global area. By retrospecting the latest research progress in the simulation of land-surface processes(LSPs) over the past 20 years, this study discusses both the simulation ability of land-surface models(LSMs) and the modification of parameterization schemes from two perspectives, the models' applicability and improved parameterization schemes. Our review suggests that different LSMs can well capture the spatiotemporal variations of the physical quantities of LSPs; but none of them can be fully applied to the plateau, meaning that all need to be revised according to the characteristics specific to the TP. Avoiding the unstable iterative computation and determining the freeze-thaw critical temperature according to the thermodynamic equilibrium equation, the unreasonable freeze-thaw parameterization scheme can be improved. Due to the complex underlying surface of the TP, no parameterization scheme of roughness length can well simulate the various characteristics of the turbulent flux over the TP at different temporal scales. The uniform soil thermodynamic and hydraulic parameterization scheme is unreasonable when it is applied to the plateau, as a result of the strong soil heterogeneity. There is little research on the snow-cover process so far,and the improved scheme has no advantage over the original one due to the lack of some related physical processes. The constant interaction among subprocesses of LSPs makes the improvement of a multiparameterization scheme yield better simulation results. According to the review of existing research, adding high-quality observation stations, developing a parameterization scheme suitable for the special LSPs of the TP, and adjusting the model structures can be helpful to the simulation of LSPs on the TP.展开更多
Based on the existing land-surface schemes and models,an improved Land-surface Process Model(LPM-ZD)has been developed.It has the following major characteristics:(1)The combination of physical equations and empirical ...Based on the existing land-surface schemes and models,an improved Land-surface Process Model(LPM-ZD)has been developed.It has the following major characteristics:(1)The combination of physical equations and empirical analytical formulae are used to construct the governing equations of soil temperature and moisture.Higher resolution of model level and physical equations are adopted for the upper soil layers,and for the lower soil layers,lower resolution of model level is adopted and empirical analytical formulae are used.(2)In land surface hydrological process,the sub-grid distribution of rainfall and its effects are taken into account. (3)A simple snow cover submodel has been used,which includes effects of snow cover on soil thermodynamics and hydrology,as well as albedo. By use of this model and three groups of point observation data,a series of“off-line”tests have been carried out.The simulation results indicate that land-surface process model has good performance and can well simulate diurnal and seasonal variation of land surface processes for many kinds of land surface covers(forest,grass,crops and desert)in different climate zone.The results simulated by the model are consistent with the observations.Later,by use of one group of observation data and the model,a series of sensitivity experiments have been done.It is shown that the model is much sensitive to some parameters,such as initial soil moisture,vegetation physical parameters as well as the proportion of the grid covered with rain.Therefore it is much important for land-surface process model to define these parameters as accurately as possible.展开更多
The survey for the HEIFE(Atmosphere-Land Surface Processes Experiment at Heihe River Basin,Western China)is given in the paper.The following basic subjects for land-surface process- es in arid areas are studied:(1)the...The survey for the HEIFE(Atmosphere-Land Surface Processes Experiment at Heihe River Basin,Western China)is given in the paper.The following basic subjects for land-surface process- es in arid areas are studied:(1)the general characteristics of the energy budget on ground surface in arid areas;(2)the parameterization of the land surface processes;(3)the interaction between oasis and its desert circumstances,a special phenomenon in arid areas.The analysis shows that the sensible heat flux in the surface energy budget is in the majority,and the latent heat flux may be neglected.The influence of atmospheric stratification stability on the turbulent transfer of energy and substance must be considered in parameterization of land surface processes in arid areas.The “cold island effect”phenomenon in oasis and the“humidity inversion”phenomenon in desert near oasis are the result of the interaction between them.The results would improve the understanding of land surface processes in arid areas.展开更多
The Land-surface Process Model(LPM-ZD)has been successfully coupled with the regional climate model RegCM2 of NCAR.Then thus-obtained coupled model(CRegCM)has been applied to simulate the climate characteristics of he...The Land-surface Process Model(LPM-ZD)has been successfully coupled with the regional climate model RegCM2 of NCAR.Then thus-obtained coupled model(CRegCM)has been applied to simulate the climate characteristics of heavy rain in middle and East China for three months from May to July 1991.and compared with model output of NCAR-RegCM2 using BATS as land- surface process scheme,abbreviated as NRegCM.The results show that CRegCM has good ability and performance.CRegCM successfully simulates the extreme precipitation event and the simulations of CRegCM for surface temperature and some physical variables related to land surface process are more reasonable than those of NRegCM.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurode...The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.展开更多
The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer r...The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.展开更多
To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt b...To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Based on observational data of arid,semi-arid and semi-humid areas in Northwest China,the characteristics of surface-wa ter heat transfer and land-surface parameters were compared and analyzed.The results show that th...Based on observational data of arid,semi-arid and semi-humid areas in Northwest China,the characteristics of surface-wa ter heat transfer and land-surface parameters were compared and analyzed.The results show that the annual mean net radi ation was largest in the semi-humid area,followed by the semi-arid area,and then the arid area:77.72 W/m^2,67.73 W/m^2,and 55.47 W/m^2,respectively.The annual mean sensible heat flux was largest in the arid area,followed by the semi-arid and semi-humid areas,while latent heat flux showed the reverse.The annual mean sensible heat flux in arid,semi-arid,and semi-humid areas was 85.7 W/m^2,37.59 W/m^2,and 27.55 W/m^2,respectively.The annual mean latent heat flux was 0 W/m^2,26.08 W/m^2,and 51.19 W/m2,respectively.The annual mean soil-heat flux at the 5-cm soil layer in arid,semi-arid,and semi-humid areas was 1.00 W/m^2,0.82 W/m^2,and 1.25 W/m^2,respectively.The annual mean surface albedo was larg est in the arid area,followed by the semi-humid area;and the smallest was in the semi-arid area:0.24,0.21,and 0.18,re spectively.The annual mean Bowen ratio in the semi-arid area was about 2.06,and that in semi-humid area was about 0.03.The annual mean soil thermal conductivity in the arid,semi-arid,and semi-humid areas was 0.26 W/(m k),1.15 W/(m k),and 1.20 W/(m k),respectively.展开更多
In order to compare the sensitivity of short-range ensemble forecasts to different land-surface parameters in the South China region,three perturbation experiments related to the land surface model(LSM),initial soil m...In order to compare the sensitivity of short-range ensemble forecasts to different land-surface parameters in the South China region,three perturbation experiments related to the land surface model(LSM),initial soil moisture(ISM),and land–atmosphere coupling coefficient(LCC)were designed,and another control experiment driven by the Global Ensemble Forecast System(GEFS)was also performed.All ensemble members were initiated at 0000 UTC each day,and integrated for 24 h for a total of 40 days from the period 1 April to 10 May 2019 based on the Weather Research and Forecasting model.The results showed that the perturbation experiment of the LSM(LSMPE)had the largest ensemble spread,as well as the lowest ensemble-mean root-mean-square error among the three sets of land-surface perturbed experiments,which indicated that it could represent more uncertainty and less error.The ensemble spread of the perturbation experiment of the ISM(ISMPE)was generally less than that of LSMPE but greater than that of LCCPE(the perturbation experiment of the LCC).In particular,although the perturbation of the LCC could not produce greater spread,it had an effective influence on the intensity of precipitation.However,the ensemble spread of all the land-surface perturbed experiments was smaller than that of GEFSPE(the control experiment).Therefore,in future,land-surface perturbations and atmospheric perturbations should be combined in the design of ensemble forecasting systems to make the model represent more uncertainties.展开更多
Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a w...Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a wide range of factors, spanning from genetic to environmental factors, and even includes the gut microbiome(GM)(Mayer et al., 2022). All these processes coincide at some point in the inflammatory process, oxidative stress, and apoptosis, at different degrees in various organs and systems that constitute a living organism(Mayer et al., 2022;AguilarHernández et al., 2023).展开更多
Arctic nighttime land-surface temperatures derived by the Moderate Resolution Imaging Spectroradiometer (MODIS) sensors onboard the NASA Terra and Aqua satellites are investigated. We use the local equator crossing ti...Arctic nighttime land-surface temperatures derived by the Moderate Resolution Imaging Spectroradiometer (MODIS) sensors onboard the NASA Terra and Aqua satellites are investigated. We use the local equator crossing times of 22:30 and 01:30, respectively, in the analysis of changes, trends and variations on the Arctic region and within 120° sectors. We show increases in the number of days above 0°C and significant increase trends over their decadal periods of March 2000 through 2010 (MODIS Terra) and July 2002 through 2012 (MODIS Aqua). The MODIS Aqua nighttime Arctic land-surface temperature change, +0.2°C ± 0.2°C with P-value of 0.01 indicates a reduction relative to the MODIS Terra nighttime Arctic land-surface temperature change, +1.8°C ± 0.3°C with P-value of 0.01. This reduction is a decadal non-stationary component of the Arctic land-surface temperature changes. The reduction is greatest, -1.3°C ± 0.2°C with P-value of 0.01 in the Eastern Russia— Western North American sector of the Arctic during the July 2002 through 2012.展开更多
Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley a...Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.展开更多
Across the Arctic changes in active layer, melting of glaciers and ground ice, thawing of permafrost and sequestration changes of carbon storage are driven in part by variations of land surface heat absorption, conduc...Across the Arctic changes in active layer, melting of glaciers and ground ice, thawing of permafrost and sequestration changes of carbon storage are driven in part by variations of land surface heat absorption, conduction and re-radiation relative to solar irradiance. We investigate Arctic land-surface temperature changes and regional variations derived by the MODIS sensors on NASA Aqua and Terra from March 2000 through July 2012. Over this decadal period we detect increase in the number of days with daytime land-surface temperature above 0℃. There are indications of increasing trends of land-surface temperature change. Regional variations of the changes in land-surface temperature likely arise due to surface material types and topography relative to the daytime variation of solar irradiance.展开更多
The diurnal variation of surface temperature is a fundamental parameter as it is a driver of physical processes of atmosphere-land and -ocean energy and mass cycles playing a key role in meteorology and climatology. O...The diurnal variation of surface temperature is a fundamental parameter as it is a driver of physical processes of atmosphere-land and -ocean energy and mass cycles playing a key role in meteorology and climatology. Our investigation focus is on the diurnal variation of land-surface temperature derived by the Moderate Resolution Imaging Spectroradiometer (MODIS) deployed on the NASA Terra and Aqua satellites. We key our investigation on the ascending and descending mode equator crossing times for daytime and nighttime land-surface temperature variations from March 2000 through 2010 (MODIS-Terra) and July 2002 through 2012 (MODIS-Aqua) and assess the diurnal land-surface temperature range changes at those sampling times. Our investigation shows non-stationary changes in the trends of land-surface temperature diurnal range. We identify changes in the diurnal range trends linked to increase of daytime and nighttime land-surface temperatures from March 2000 through 2010 and decrease in daytime and nighttime land-surface temperatures from July 2002 through 2012. The most recent decrease in daytime and nighttime land-surface temperatures and diurnal range will affect Arctic and other associated energy and mass cycles.展开更多
Photovoltaic (PV) modules, as essential components of solar power generation systems, significantly influence unitpower generation costs.The service life of these modules directly affects these costs. Over time, the p...Photovoltaic (PV) modules, as essential components of solar power generation systems, significantly influence unitpower generation costs.The service life of these modules directly affects these costs. Over time, the performanceof PV modules gradually declines due to internal degradation and external environmental factors.This cumulativedegradation impacts the overall reliability of photovoltaic power generation. This study addresses the complexdegradation process of PV modules by developing a two-stage Wiener process model. This approach accountsfor the distinct phases of degradation resulting from module aging and environmental influences. A powerdegradation model based on the two-stage Wiener process is constructed to describe individual differences inmodule degradation processes. To estimate the model parameters, a combination of the Expectation-Maximization(EM) algorithm and the Bayesian method is employed. Furthermore, the Schwarz Information Criterion (SIC) isutilized to identify critical change points in PV module degradation trajectories. To validate the universality andeffectiveness of the proposed method, a comparative analysis is conducted against other established life predictiontechniques for PV modules.展开更多
Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network act...Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.展开更多
Fenton and Fenton-like processes,which could produce highly reactive species to degrade organic contaminants,have been widely used in the field of wastewater treatment.Therein,the chemistry of Fenton process including...Fenton and Fenton-like processes,which could produce highly reactive species to degrade organic contaminants,have been widely used in the field of wastewater treatment.Therein,the chemistry of Fenton process including the nature of active oxidants,the complicated reactions involved,and the behind reason for its strongly pH-dependent performance,is the basis for the application of Fenton and Fenton-like processes in wastewater treatment.Nevertheless,the conflicting views still exist about the mechanism of the Fenton process.For instance,reaching a unanimous consensus on the nature of active oxidants(hydroxyl radical or tetravalent iron)in this process remains challenging.This review comprehensively examined the mechanism of the Fenton process including the debate on the nature of active oxidants,reactions involved in the Fenton process,and the behind reason for the pH-dependent degradation of contaminants in the Fenton process.Then,we summarized several strategies that promote the Fe(Ⅱ)/Fe(Ⅲ)cycle,reduce the competitive consumption of active oxidants by side reactions,and replace the Fenton reagent,thus improving the performance of the Fenton process.Furthermore,advances for the future were proposed including the demand for the high-accuracy identification of active oxidants and taking advantages of the characteristic of target contaminants during the degradation of contaminants by the Fenton process.展开更多
基金Supported by National Natural Science Fund Item,China (41005002,40875029)
文摘[Objective] The research aimed to carry out numerical simulation on impact of land-surface process in a Meiyu front rainstorm.[Method] Based on the meso-scale atmospheric non-hydrostatic model GRAPES-Meso which coupled with NOAH land-surface module,a Meiyu front rainstorm in Jianghuai basin during 6-8 July,2005 was simulated.Via sensitivity tests with and without land-surface process,the impact of land-surface process on Meiyu front rainstorm was studied.[Result] GRAPES-Meso which coupled with NOAH land-surface process could simulate daily variation characteristics of Meiyu front precipitation and atmospheric low-level southwest jet.The land-surface process could improve the simulations of precipitation initiation,intensity and distribution.The improvement of precipitation initiation simulation was especially obvious,which solved spin-up problem of model to some extent.When the land-atmosphere interaction wasn’t considered,the precipitation initiation of model was very slow.The intensity evolution of simulated precipitation was different from actual situation.Moreover,it couldn’t simulate daily variation characteristics of precipitation and southwest jet.[Conclusion] The land-surface process had important impact on Meiyu process in Jianghuai basin.
基金funded by the National Natural Science Foundation of China (41571066, 41601077, and 41771068)the Strategic Priority Research Pro gram of the Chinese Academy of Sciences (CAS) (XDA20100102, XDA19070204)+2 种基金the CAS "Light of West China" Programthe Youth Innovation Promo tion Association CAS (2018460)the Program of China Scholarship Council (201804910129)
文摘The Tibetan Plateau(TP) has powerful dynamics and thermal effects, which makes the interaction between its land and atmosphere significantly affect climate and environment in the regional or global area. By retrospecting the latest research progress in the simulation of land-surface processes(LSPs) over the past 20 years, this study discusses both the simulation ability of land-surface models(LSMs) and the modification of parameterization schemes from two perspectives, the models' applicability and improved parameterization schemes. Our review suggests that different LSMs can well capture the spatiotemporal variations of the physical quantities of LSPs; but none of them can be fully applied to the plateau, meaning that all need to be revised according to the characteristics specific to the TP. Avoiding the unstable iterative computation and determining the freeze-thaw critical temperature according to the thermodynamic equilibrium equation, the unreasonable freeze-thaw parameterization scheme can be improved. Due to the complex underlying surface of the TP, no parameterization scheme of roughness length can well simulate the various characteristics of the turbulent flux over the TP at different temporal scales. The uniform soil thermodynamic and hydraulic parameterization scheme is unreasonable when it is applied to the plateau, as a result of the strong soil heterogeneity. There is little research on the snow-cover process so far,and the improved scheme has no advantage over the original one due to the lack of some related physical processes. The constant interaction among subprocesses of LSPs makes the improvement of a multiparameterization scheme yield better simulation results. According to the review of existing research, adding high-quality observation stations, developing a parameterization scheme suitable for the special LSPs of the TP, and adjusting the model structures can be helpful to the simulation of LSPs on the TP.
文摘Based on the existing land-surface schemes and models,an improved Land-surface Process Model(LPM-ZD)has been developed.It has the following major characteristics:(1)The combination of physical equations and empirical analytical formulae are used to construct the governing equations of soil temperature and moisture.Higher resolution of model level and physical equations are adopted for the upper soil layers,and for the lower soil layers,lower resolution of model level is adopted and empirical analytical formulae are used.(2)In land surface hydrological process,the sub-grid distribution of rainfall and its effects are taken into account. (3)A simple snow cover submodel has been used,which includes effects of snow cover on soil thermodynamics and hydrology,as well as albedo. By use of this model and three groups of point observation data,a series of“off-line”tests have been carried out.The simulation results indicate that land-surface process model has good performance and can well simulate diurnal and seasonal variation of land surface processes for many kinds of land surface covers(forest,grass,crops and desert)in different climate zone.The results simulated by the model are consistent with the observations.Later,by use of one group of observation data and the model,a series of sensitivity experiments have been done.It is shown that the model is much sensitive to some parameters,such as initial soil moisture,vegetation physical parameters as well as the proportion of the grid covered with rain.Therefore it is much important for land-surface process model to define these parameters as accurately as possible.
基金This study is supported by the National Natural Science Foundation of China.
文摘The survey for the HEIFE(Atmosphere-Land Surface Processes Experiment at Heihe River Basin,Western China)is given in the paper.The following basic subjects for land-surface process- es in arid areas are studied:(1)the general characteristics of the energy budget on ground surface in arid areas;(2)the parameterization of the land surface processes;(3)the interaction between oasis and its desert circumstances,a special phenomenon in arid areas.The analysis shows that the sensible heat flux in the surface energy budget is in the majority,and the latent heat flux may be neglected.The influence of atmospheric stratification stability on the turbulent transfer of energy and substance must be considered in parameterization of land surface processes in arid areas.The “cold island effect”phenomenon in oasis and the“humidity inversion”phenomenon in desert near oasis are the result of the interaction between them.The results would improve the understanding of land surface processes in arid areas.
基金This work is supported by the National Key Research Project 96-908-02-04.
文摘The Land-surface Process Model(LPM-ZD)has been successfully coupled with the regional climate model RegCM2 of NCAR.Then thus-obtained coupled model(CRegCM)has been applied to simulate the climate characteristics of heavy rain in middle and East China for three months from May to July 1991.and compared with model output of NCAR-RegCM2 using BATS as land- surface process scheme,abbreviated as NRegCM.The results show that CRegCM has good ability and performance.CRegCM successfully simulates the extreme precipitation event and the simulations of CRegCM for surface temperature and some physical variables related to land surface process are more reasonable than those of NRegCM.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.
基金supported by the National Natural Science Foundation of China(Grant No.42130312)。
文摘The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.
基金Funded by the National Natural Science Foundation of China(No.52278446)。
文摘To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
文摘Based on observational data of arid,semi-arid and semi-humid areas in Northwest China,the characteristics of surface-wa ter heat transfer and land-surface parameters were compared and analyzed.The results show that the annual mean net radi ation was largest in the semi-humid area,followed by the semi-arid area,and then the arid area:77.72 W/m^2,67.73 W/m^2,and 55.47 W/m^2,respectively.The annual mean sensible heat flux was largest in the arid area,followed by the semi-arid and semi-humid areas,while latent heat flux showed the reverse.The annual mean sensible heat flux in arid,semi-arid,and semi-humid areas was 85.7 W/m^2,37.59 W/m^2,and 27.55 W/m^2,respectively.The annual mean latent heat flux was 0 W/m^2,26.08 W/m^2,and 51.19 W/m2,respectively.The annual mean soil-heat flux at the 5-cm soil layer in arid,semi-arid,and semi-humid areas was 1.00 W/m^2,0.82 W/m^2,and 1.25 W/m^2,respectively.The annual mean surface albedo was larg est in the arid area,followed by the semi-humid area;and the smallest was in the semi-arid area:0.24,0.21,and 0.18,re spectively.The annual mean Bowen ratio in the semi-arid area was about 2.06,and that in semi-humid area was about 0.03.The annual mean soil thermal conductivity in the arid,semi-arid,and semi-humid areas was 0.26 W/(m k),1.15 W/(m k),and 1.20 W/(m k),respectively.
基金This work was supported by the National Key R&D Program on the Monitoring,Early Warning and Prevention of Major Natural Disasters[grant number 2017YFC1502103]the Key Special Project for the Introducing Talents Team of the Southern Marine Science and Engineering Guangdong Laboratory(Guangzhou)[grant number GML2019ZD0601]the National Natural Science Foundation of China[grant numbers 41875136,41305099,and 41801019].
文摘In order to compare the sensitivity of short-range ensemble forecasts to different land-surface parameters in the South China region,three perturbation experiments related to the land surface model(LSM),initial soil moisture(ISM),and land–atmosphere coupling coefficient(LCC)were designed,and another control experiment driven by the Global Ensemble Forecast System(GEFS)was also performed.All ensemble members were initiated at 0000 UTC each day,and integrated for 24 h for a total of 40 days from the period 1 April to 10 May 2019 based on the Weather Research and Forecasting model.The results showed that the perturbation experiment of the LSM(LSMPE)had the largest ensemble spread,as well as the lowest ensemble-mean root-mean-square error among the three sets of land-surface perturbed experiments,which indicated that it could represent more uncertainty and less error.The ensemble spread of the perturbation experiment of the ISM(ISMPE)was generally less than that of LSMPE but greater than that of LCCPE(the perturbation experiment of the LCC).In particular,although the perturbation of the LCC could not produce greater spread,it had an effective influence on the intensity of precipitation.However,the ensemble spread of all the land-surface perturbed experiments was smaller than that of GEFSPE(the control experiment).Therefore,in future,land-surface perturbations and atmospheric perturbations should be combined in the design of ensemble forecasting systems to make the model represent more uncertainties.
基金funded by CONAHCYT grant(252808)to GFCONAHCYT’s“Estancias Posdoctorales por México”program(662350)to HTB。
文摘Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a wide range of factors, spanning from genetic to environmental factors, and even includes the gut microbiome(GM)(Mayer et al., 2022). All these processes coincide at some point in the inflammatory process, oxidative stress, and apoptosis, at different degrees in various organs and systems that constitute a living organism(Mayer et al., 2022;AguilarHernández et al., 2023).
文摘Arctic nighttime land-surface temperatures derived by the Moderate Resolution Imaging Spectroradiometer (MODIS) sensors onboard the NASA Terra and Aqua satellites are investigated. We use the local equator crossing times of 22:30 and 01:30, respectively, in the analysis of changes, trends and variations on the Arctic region and within 120° sectors. We show increases in the number of days above 0°C and significant increase trends over their decadal periods of March 2000 through 2010 (MODIS Terra) and July 2002 through 2012 (MODIS Aqua). The MODIS Aqua nighttime Arctic land-surface temperature change, +0.2°C ± 0.2°C with P-value of 0.01 indicates a reduction relative to the MODIS Terra nighttime Arctic land-surface temperature change, +1.8°C ± 0.3°C with P-value of 0.01. This reduction is a decadal non-stationary component of the Arctic land-surface temperature changes. The reduction is greatest, -1.3°C ± 0.2°C with P-value of 0.01 in the Eastern Russia— Western North American sector of the Arctic during the July 2002 through 2012.
基金supported by the General Program of the National Natural Science Foundation of China(No.52274326)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202109)the Seventh Batch of Ten Thousand Talents Plan of China(No.ZX20220553).
文摘Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.
文摘Across the Arctic changes in active layer, melting of glaciers and ground ice, thawing of permafrost and sequestration changes of carbon storage are driven in part by variations of land surface heat absorption, conduction and re-radiation relative to solar irradiance. We investigate Arctic land-surface temperature changes and regional variations derived by the MODIS sensors on NASA Aqua and Terra from March 2000 through July 2012. Over this decadal period we detect increase in the number of days with daytime land-surface temperature above 0℃. There are indications of increasing trends of land-surface temperature change. Regional variations of the changes in land-surface temperature likely arise due to surface material types and topography relative to the daytime variation of solar irradiance.
文摘The diurnal variation of surface temperature is a fundamental parameter as it is a driver of physical processes of atmosphere-land and -ocean energy and mass cycles playing a key role in meteorology and climatology. Our investigation focus is on the diurnal variation of land-surface temperature derived by the Moderate Resolution Imaging Spectroradiometer (MODIS) deployed on the NASA Terra and Aqua satellites. We key our investigation on the ascending and descending mode equator crossing times for daytime and nighttime land-surface temperature variations from March 2000 through 2010 (MODIS-Terra) and July 2002 through 2012 (MODIS-Aqua) and assess the diurnal land-surface temperature range changes at those sampling times. Our investigation shows non-stationary changes in the trends of land-surface temperature diurnal range. We identify changes in the diurnal range trends linked to increase of daytime and nighttime land-surface temperatures from March 2000 through 2010 and decrease in daytime and nighttime land-surface temperatures from July 2002 through 2012. The most recent decrease in daytime and nighttime land-surface temperatures and diurnal range will affect Arctic and other associated energy and mass cycles.
基金supported by the National Natural Science Foundation of China(51767017)the Basic Research Innovation Group Project of Gansu Province(18JR3RA133)the Industrial Support and Guidance Project of Universities in Gansu Province(2022CYZC-22).
文摘Photovoltaic (PV) modules, as essential components of solar power generation systems, significantly influence unitpower generation costs.The service life of these modules directly affects these costs. Over time, the performanceof PV modules gradually declines due to internal degradation and external environmental factors.This cumulativedegradation impacts the overall reliability of photovoltaic power generation. This study addresses the complexdegradation process of PV modules by developing a two-stage Wiener process model. This approach accountsfor the distinct phases of degradation resulting from module aging and environmental influences. A powerdegradation model based on the two-stage Wiener process is constructed to describe individual differences inmodule degradation processes. To estimate the model parameters, a combination of the Expectation-Maximization(EM) algorithm and the Bayesian method is employed. Furthermore, the Schwarz Information Criterion (SIC) isutilized to identify critical change points in PV module degradation trajectories. To validate the universality andeffectiveness of the proposed method, a comparative analysis is conducted against other established life predictiontechniques for PV modules.
基金Technology Development Program of Jilin Province(YDZJ202201ZYTS640)the National Key Research and Development Program of China(2022YFB4200400)funded by MOST+4 种基金the National Natural Science Foundation of China(52172048 and 52103221)Shandong Provincial Natural Science Foundation(ZR2021QB024 and ZR2021ZD06)Guangdong Basic and Applied Basic Research Foundation(2023A1515012323,2023A1515010943,and 2024A1515010023)the Qingdao New Energy Shandong Laboratory open Project(QNESL OP 202309)the Fundamental Research Funds of Shandong University.
文摘Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.
基金supported by the National Natural Science Foundation of China(Nos.22206050 and 52270047).
文摘Fenton and Fenton-like processes,which could produce highly reactive species to degrade organic contaminants,have been widely used in the field of wastewater treatment.Therein,the chemistry of Fenton process including the nature of active oxidants,the complicated reactions involved,and the behind reason for its strongly pH-dependent performance,is the basis for the application of Fenton and Fenton-like processes in wastewater treatment.Nevertheless,the conflicting views still exist about the mechanism of the Fenton process.For instance,reaching a unanimous consensus on the nature of active oxidants(hydroxyl radical or tetravalent iron)in this process remains challenging.This review comprehensively examined the mechanism of the Fenton process including the debate on the nature of active oxidants,reactions involved in the Fenton process,and the behind reason for the pH-dependent degradation of contaminants in the Fenton process.Then,we summarized several strategies that promote the Fe(Ⅱ)/Fe(Ⅲ)cycle,reduce the competitive consumption of active oxidants by side reactions,and replace the Fenton reagent,thus improving the performance of the Fenton process.Furthermore,advances for the future were proposed including the demand for the high-accuracy identification of active oxidants and taking advantages of the characteristic of target contaminants during the degradation of contaminants by the Fenton process.
