The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show...The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.展开更多
During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive...During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.展开更多
Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appea...Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appearing within the first few weeks of life[1],and remains a challenge to treat.Here,we report a case of LWNH and review the relevant literature to help clinicians better understand this disease.展开更多
The exact feedback linearization method implies an accurate knowledge of the model and its parameters.This assumption is an inherent limitation of the method,suffering from robustness issues.In general,the model struc...The exact feedback linearization method implies an accurate knowledge of the model and its parameters.This assumption is an inherent limitation of the method,suffering from robustness issues.In general,the model structure is only partially known and its parameters present uncertainties.The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriatelydesigned robust control layer.This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction.We consider the case of full relative degree input-affine nonlinear systems,which are of great practical importance in the literature.The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties.The constructive proofs provide exact representations of the uncertainty models in three considered scenarios:unmatched,fully-matched,and partially-matched uncertainties.The uncertainty model will be a descriptor system,which also represents one of the novelties of the paper.Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alternatives.The end-to-end procedure is emphasized on an illustrative example,in two different hypotheses.展开更多
This paper,the first-part of a two part series of surveys on Incremental Nonlinear Dynamic Inversion(INDI),provides an overview of the evolution and developments in INDI.Written in a tutorial style,it presents differe...This paper,the first-part of a two part series of surveys on Incremental Nonlinear Dynamic Inversion(INDI),provides an overview of the evolution and developments in INDI.Written in a tutorial style,it presents different basic INDI variants and their specifics,such as modelbased INDI,sensor-based INDI,and hybrid INDI.Furthermore,it sets these different approaches in context with each other.Later developments of INDI explicitly consider actuator dynamics.Those concepts are summarized and discussed in detail.Subsequently,studies that relate INDI to other control methods are summarized.Finally,an overview of various applications of INDI is given,covering different types of control loops and various types of vehicles and plants.This paper seeks to set these developments into context with each other.The purpose of this paper is twofold.INDI is already well-known in the domain of flight control but less so in other fields.Therefore,the paper is written in a comprehensive tutorial style to provide easy access to readers unfamiliar with the topic.On the other hand,the paper can serve as a reference for readers familiar with the topic.展开更多
Due to the heterogeneity of rock masses and the variability of in situ stress,the traditional linear inversion method is insufficiently accurate to achieve high accuracy of the in situ stress field.To address this cha...Due to the heterogeneity of rock masses and the variability of in situ stress,the traditional linear inversion method is insufficiently accurate to achieve high accuracy of the in situ stress field.To address this challenge,nonlinear stress boundaries for a numerical model are determined through regression analysis of a series of nonlinear coefficient matrices,which are derived from the bubbling method.Considering the randomness and flexibility of the bubbling method,a parametric study is conducted to determine recommended ranges for these parameters,including the standard deviation(σb)of bubble radii,the non-uniform coefficient matrix number(λ)for nonlinear stress boundaries,and the number(m)and positions of in situ stress measurement points.A model case study provides a reference for the selection of these parameters.Additionally,when the nonlinear in situ stress inversion method is employed,stress distortion inevitably occurs near model boundaries,aligning with the Saint Venant's principle.Two strategies are proposed accordingly:employing a systematic reduction of nonlinear coefficients to achieve high inversion accuracy while minimizing significant stress distortion,and excluding regions with severe stress distortion near the model edges while utilizing the central part of the model for subsequent simulations.These two strategies have been successfully implemented in the nonlinear in situ stress inversion of the Xincheng Gold Mine and have achieved higher inversion accuracy than the linear method.Specifically,the linear and nonlinear inversion methods yield root mean square errors(RMSE)of 4.15 and 3.2,and inversion relative errors(δAve)of 22.08%and 17.55%,respectively.Therefore,the nonlinear inversion method outperforms the traditional multiple linear regression method,even in the presence of a systematic reduction in the nonlinear stress boundaries.展开更多
Incremental Nonlinear Dynamic Inversion(INDI)is a control approach that has gained popularity in flight control over the past decade.Besides the INDI law,several common additional components complement an INDI-based c...Incremental Nonlinear Dynamic Inversion(INDI)is a control approach that has gained popularity in flight control over the past decade.Besides the INDI law,several common additional components complement an INDI-based controller.This paper,the second part of a two-part series of surveys on INDI,aims to summarize the modern trends in INDI and its related components.Besides a comprehensive components specification,it addresses their most common challenges,compares different variants,and discusses proposed advances.Further important aspects of INDI are gain design,stability,and robustness.This paper also provides an overview of research conducted concerning these aspects.This paper is written in a tutorial style to familiarize researchers with the essential specifics and pitfalls of INDI and its components.At the same time,it can also serve as a reference for readers already familiar with INDI.展开更多
Dear Editor,In this letter,several novel controllability results for a class of linear switched and impulsive systems are established.Different from the developed controllability conditions in most existing literature...Dear Editor,In this letter,several novel controllability results for a class of linear switched and impulsive systems are established.Different from the developed controllability conditions in most existing literature,the important role of switched and impulsive time sequence is considered.Applying the relevant geometric theory of matrix,a necessary and sufficient criterion for the controllability is firstly developed to judge when the controllability of such systems is affected by switched and impulsive time sequence.Furthermore,we further obtain a sufficient controllability condition that can be used to verify the controllability of such systems regardless of the switched and impulsive time sequence.Finally,a numerical example is given to verify the obtained theoretical results.展开更多
We have designed,assembled,and tested a 4-MA,60-ns fast linear transformer driver(LTD),which is the first operating generator featuring multiple LTD modules connected in parallel.The LTD-based accelerator comprises si...We have designed,assembled,and tested a 4-MA,60-ns fast linear transformer driver(LTD),which is the first operating generator featuring multiple LTD modules connected in parallel.The LTD-based accelerator comprises six modules in parallel,each of which has ten-stage cavities stacked in series.The six LTD modules are connected to a water tank of diameter 6 m via a 3-m-long impedance-matched deionized waterinsulated coaxial transmission line.In the water tank,the electrical pulses are transmitted down by six horizontal tri-plate transmission lines.A 2.1-m-diameter two-level vacuum insulator stack is utilized to separate the deionized water region from the vacuum region.In the vacuum,the currents are further transported downstream by a two-level magnetically insulated transmission-line and then converged through four post-hole convolutes.Plasma radiation loads or bremsstrahlung electron beam diodes serve as loads that are expected to generate intense soft X rays or warm X rays.The machine is 3.2 m in height and 22 m in outer diameter,including support systems such as a high-voltage charge supply,magnetic core reset system,trigger system,and support platform for inner stalk installation and maintenance.A total of 1440 individual±100-kV multi-gap spark switches and 2880 individual 100-kV capacitors are employed in the accelerator.A total of 12 fiberoptic laser-controlled trigger generators combining photoconductive and traditional gas spark switch technologies are used to realize the synchronous discharge of the more than 1000 gas switches.At an LTD charge voltage of±85 kV,the accelerator stores an initial energy of about 300 kJ and is expected to deliver a current of 3–5 MA into various loads.To date,the LTD facility has shot into a thick-walled aluminum liner load and a reflex triode load.With a thick-walled aluminum liner of inductance 1.81 nH,a current with peak up to 4.1 MA and rise time(10%–90%)of about 60 ns has been achieved.The current transport efficiency from the insulator stack to the liner load approaches 100%during peak times.The LTD accelerator has been used to drive reflex triode loads generating warm X rays with high energy fluence and large radiation area.It has been demonstrated that this LTD is a promising and high-efficiency prime pulsed power source suitable for use in constructing the next generation of large-scale accelerators with currents of tens of megaamperes.展开更多
Dear Editor,This letter studies output consensus problem of heterogeneous linear multiagent systems over directed graphs. A novel adaptive dynamic event-triggered controller is presented based only on the feedback com...Dear Editor,This letter studies output consensus problem of heterogeneous linear multiagent systems over directed graphs. A novel adaptive dynamic event-triggered controller is presented based only on the feedback combination of the agent's own state and neighbors' output,which can achieve exponential output consensus through intermittent communication. The controller is obtained by solving two linear matrix equations, and Zeno behavior is excluded.展开更多
We study the existence and stability of dark-gap solitons in linear lattice and nonlinear lattices.The results indicate that the combination of linear and nonlinear lattices gives dark-gap solitons unique properties.T...We study the existence and stability of dark-gap solitons in linear lattice and nonlinear lattices.The results indicate that the combination of linear and nonlinear lattices gives dark-gap solitons unique properties.The linear lattice can stabilize dark-gap solitons,while the nonlinear lattice reduces the stability of dark-gap solitons.On the basis of numerical analysis,we investigate the effects of lattice depth,chemical potential,nonlinear lattice amplitude,and nonlinear lattice period on the soliton in mixed lattices with the same and different periods.The stability of dark-gap soliton is studied carefully by means of real-time evolution and linear stability analysis.Dark-gap solitons can exist stably in the band gap,but the solitons formed by the mixed lattices are slightly different when the period is the same or different.展开更多
Piecewise linear systems are prevalent in engineering practice,and can be categorized into symmetric and asymmetric piecewise linear systems.Considering that symmetry is a special case of asymmetry,it is essential to ...Piecewise linear systems are prevalent in engineering practice,and can be categorized into symmetric and asymmetric piecewise linear systems.Considering that symmetry is a special case of asymmetry,it is essential to investigate the broader model,namely the asymmetric piecewise linear system.The traditional averaging method is frequently used for studying nonlinear systems,particularly symmetric piecewise linear systems,with the harmonic response of the oscillator serving as a key prerequisite for calculating steady-state solutions.However,asymmetric systems inherently exhibit nonharmonic,asymmetric responses,rendering the traditional averaging method inapplicable.To overcome this limitation,this paper introduces an improved averaging method tailored for an oscillator characterized by asymmetric gaps and springs.Unlike the traditional method,which assumes a purely harmonic response,the improved averaging method redefines the system response as a superposition of a direct current(DC)term and a first harmonic component.Herein,the DC term can be regarded as the offset induced by model asymmetry.Furthermore,the DC term is treated as a slow variable function of time,with its time derivative assumed to be zero when calculating the steady-state solution,akin to the amplitude and phase in the traditional averaging method.Numerical validation demonstrates that the responses computed in both time and frequency domains with the improved averaging method exhibit greater accuracy compared with those derived from the traditional method.Leveraging these improved results,the study also examines the parameter effect,stability,and bifurcation phenomena within the amplitude-frequency responses.展开更多
The arc-linear motor(ALM) is a new type of special motor derived from the linear motor, which has the merits of high torque, compact structure and fast dynamic response. This kind of motor does not need a complex inte...The arc-linear motor(ALM) is a new type of special motor derived from the linear motor, which has the merits of high torque, compact structure and fast dynamic response. This kind of motor does not need a complex intermediate transmission device, it is used in some direct-drive applications for continuous rotation or limited angle motion. However, there is no systematic summary and generalization of the ALMs so far.Therefore, this paper systematically overviews the recent advances in ALMs for direct-drive systems. First, the evolution process and basic structure of the ALM are introduced. And then, various ALMs are reviewed with particular reference to motor topologies, working principle, motor performance,optimization design and control techniques. To heel, a comprehensive comparison of several typical ALMs is carried out. Finally, the application areas, main challenges and development trends of the ALMs are highlighted.展开更多
In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the p...In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the pendulum arms in the upright position and the car to reach the equilibrium position.Grey Wolf Optimization-based Linear Quadratic Regulator(GWO-LQR)and GWO-based Fuzzy LQR(FLQR)control algorithms are used in the control process.To improve the performance of the LQR and FLQR methods,the optimum values of the coefficients corresponding to the foot points of the membership functions are determined by the GWO algorithm.Both a graphic and a numerical analysis of the outcomes are provided.In the comparative analysis,it is observed that the GWO-based FLQR method reduces the settling time by 22.58% and the maximum peak value by 18.2% when evaluated in terms of the angular response of the pendulum arm.Furthermore,this approach outperformed comparable research in the literature with a settling time of 2.4 s.These findings demonstrate that the suggested GWO-based FLQR controlmethod outperforms existing literature in terms of the time required for the pendulum arm to reach equilibrium.展开更多
Natural soil generally exhibits significant transverse isotropy(TI)due to weathering and sedimentation,meaning that horizontal moduli differ from their vertical counterpart.The TI mechanical model is more appropriate ...Natural soil generally exhibits significant transverse isotropy(TI)due to weathering and sedimentation,meaning that horizontal moduli differ from their vertical counterpart.The TI mechanical model is more appropriate for actual situations.Although soil exhibits material nonlinearity under earthquake excitation,existing research on the TI medium is limited to soil linearity and neglects the nonlinear response of TI sites.A 2D equivalent linear model for a layered TI half-space subjected to seismic waves is derived in the transformed wave number domain using the exact dynamic stiffness matrix of the TI medium.This study introduces a method for determining the effective shear strain of TI sites under oblique wave incidence,and further describes a systematic study on the effects of TI parameters and soil nonlinearity on site responses.Numerical results indicate that seismic responses of the TI medium significantly differ from those of isotropic sites and that the responses are highly dependent on TI parameters,particularly in nonlinear cases,while also being sensitive to incident angle and excitation intensity.Moreover,the differences in peak acceleration and waveform for various TI materials may also be amplified due to the strong nonlinearity.The study provides valuable insights for improving the accuracy of seismic response analysis in engineering applications.展开更多
We report a systematic study on the transport properties of(Bi_(0.2)Sb_(0.8))_(2)Te_(3)and(Bi_(0.4)Sb_(0.6))_(2)Te_(3)nanoplates with a thickness of about 6 nm grown by chemical vapor deposition(CVD)on Si/SiO_(2)subst...We report a systematic study on the transport properties of(Bi_(0.2)Sb_(0.8))_(2)Te_(3)and(Bi_(0.4)Sb_(0.6))_(2)Te_(3)nanoplates with a thickness of about 6 nm grown by chemical vapor deposition(CVD)on Si/SiO_(2)substrate.We achieve a significant ambipolar field effect in the two samples with different compositions by applying back-gate voltage,successfully tuning the Fermi level across the Dirac point of surface states.It is found that the Hall resistance exhibits strong non-linear behavior and magnetic field induced sign change of the slope when the Fermi level is near the Dirac point,indicating the coexistence of n-type and p-type carriers.Moreover,this coincides with the striking crossover from weak antilocalization(WAL)to linear magnetoresistance(LMR).These gate and temperature dependent magneto-transport studies provide a deeper insight into the nature of LMR and WAL in topological materials.展开更多
We study the thermodynamic properties of the classical one-dimensional generalized nonlinear Klein-Gordon lattice model(n≥2)by using the cluster variation method with linear response theory.The results of this method...We study the thermodynamic properties of the classical one-dimensional generalized nonlinear Klein-Gordon lattice model(n≥2)by using the cluster variation method with linear response theory.The results of this method are exact in the thermodynamic limit.We present the single-site reduced densityρ^((1))(z),averages such as(z^(2)),<|z^(n)|>,and<(z_(1)-z_(2))^(2)>,the specific heat C_(v),and the static correlation functions.We analyze the scaling behavior of these quantities and obtain the exact scaling powers at the low and high temperatures.Using these results,we gauge the accuracy of the projective truncation approximation for theφ^(4)lattice model.展开更多
Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol ...Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).展开更多
Fong et al.analyzed variable-rate linear network coding for linear broadcast.However,the authors didn't investigate it for the other three types of linear network codes.In this paper,by simple and clear proofs,it ...Fong et al.analyzed variable-rate linear network coding for linear broadcast.However,the authors didn't investigate it for the other three types of linear network codes.In this paper,by simple and clear proofs,it is found that there are similar results for variable-rate linear generic and linear dispersion if the field size is large enough.It means that linear generics and linear dispersions of different dimensions can be implemented on the same network,while each non-source node is required to store only one copy of the local encoding kernel within a session.Moreover,an example is given to show that there isn't a similar result for linear multicast.展开更多
GH4169 joints manufactured by Linear Friction Welding(LFW)are subjected to tensile test and stair-case method to evaluate the High Cycle Fatigue(HCF)performance at 650℃.The yield and ultimate tensile strengths are 58...GH4169 joints manufactured by Linear Friction Welding(LFW)are subjected to tensile test and stair-case method to evaluate the High Cycle Fatigue(HCF)performance at 650℃.The yield and ultimate tensile strengths are 582 MPa and 820 MPa,respectively.The HCF strength of joint reaches 400 MPa,which is slightly lower than that of Base Metal(BM),indicating reliable quality of this type of joint.The microstructure observation results show that all cracks initiate at the inside of specimens and transfer into deeper region with decrease of external stress,and the crack initiation site is related with microhardness of matrix.The Electron Backscattered Diffraction(EBSD)results of the observed regions with different distances to fracture show that plastic deformation plays a key role in HCF,and the Schmid factor of most grains near fracture exceeds 0.4.In addition,the generation of twins plays a vital role in strain concentration release and coordinating plastic deformation among grains.展开更多
基金supported by the National Natural Science Foundation of China(NSFC 52175281,52475315)Youth Innovation Promotion Association of CAS(2021382)。
文摘The growing prevalence of exercise-induced tibial stress fractures demands wearable sensors capable of monitoring dynamic musculoskeletal loads with medical-grade precision.While flexible pressure-sensing insoles show clinical potential,their development has been hindered by the intrinsic trade-off between high sensitivity and full-range linearity(R^(2)>0.99 up to 1 MPa)in conventional designs.Inspired by the tactile sensing mechanism of human skin,where dermal stratification enables wide-range pressure adaptation and ion-channelregulated signaling maintains linear electrical responses,we developed a dual-mechanism flexible iontronic pressure sensor(FIPS).This innovative design synergistically combines two bioinspired components:interdigitated fabric microstructures enabling pressure-proportional contact area expansion(αP1/3)and iontronic film facilitating self-adaptive ion concentration modulation(αP^(2/3)),which together generate a linear capacitance-pressure response(CαP).The FIPS achieves breakthrough performance:242 kPa^(-1)sensitivity with 0.997linearity across 0-1 MPa,yielding a record linear sensing factor(LSF=242,000).The design is validated across various substrates and ionic materials,demonstrating its versatility.Finally,the FIPS-driven design enables a smart insole demonstrating 1.8%error in tibial load assessment during gait analysis,outperforming nonlinear counterparts(6.5%error)in early fracture-risk prediction.The biomimetic design framework establishes a universal approach for developing high-performance linear sensors,establishing generalized principles for medical-grade wearable devices.
基金supported by the National Natural Sci‐ence Foundation of China(Grant No.62306325)。
文摘During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.
文摘Dear Editor,Linear and whorled nevoid hypermelanosis(LWNH)is a rare,sporadic pigmentary disorder characterized by hyperpigmented macules arranged in linear streaks and whorls along Blaschko's lines,typically appearing within the first few weeks of life[1],and remains a challenge to treat.Here,we report a case of LWNH and review the relevant literature to help clinicians better understand this disease.
基金funded by the project new smart and adaptive robotics solutions for personalized minimally invasive surgery in cancer treatment−ATHENA,European Union-NextGenerationEU and Romanian Government,under National Recovery and Resilience Plan for Romania(CF116/15.11.2022)through the Romanian Ministry of Research,Innovation and Digitalization(within Component 9,investment I8)。
文摘The exact feedback linearization method implies an accurate knowledge of the model and its parameters.This assumption is an inherent limitation of the method,suffering from robustness issues.In general,the model structure is only partially known and its parameters present uncertainties.The current paper extends the classical exact feedback linearization to the robust feedback linearization by adding an appropriatelydesigned robust control layer.This is then able to ensure robust stability and robust performance for the given uncertain system in a desired region of attraction.We consider the case of full relative degree input-affine nonlinear systems,which are of great practical importance in the literature.The inner loop contains the feedback linearization input for the nominal system and the resulting residual nonlinearities can always be characterized as inverse additive uncertainties.The constructive proofs provide exact representations of the uncertainty models in three considered scenarios:unmatched,fully-matched,and partially-matched uncertainties.The uncertainty model will be a descriptor system,which also represents one of the novelties of the paper.Our approach leads to a simplified control structure and a less conservative coverage of the uncertainty set compared to current alternatives.The end-to-end procedure is emphasized on an illustrative example,in two different hypotheses.
文摘This paper,the first-part of a two part series of surveys on Incremental Nonlinear Dynamic Inversion(INDI),provides an overview of the evolution and developments in INDI.Written in a tutorial style,it presents different basic INDI variants and their specifics,such as modelbased INDI,sensor-based INDI,and hybrid INDI.Furthermore,it sets these different approaches in context with each other.Later developments of INDI explicitly consider actuator dynamics.Those concepts are summarized and discussed in detail.Subsequently,studies that relate INDI to other control methods are summarized.Finally,an overview of various applications of INDI is given,covering different types of control loops and various types of vehicles and plants.This paper seeks to set these developments into context with each other.The purpose of this paper is twofold.INDI is already well-known in the domain of flight control but less so in other fields.Therefore,the paper is written in a comprehensive tutorial style to provide easy access to readers unfamiliar with the topic.On the other hand,the paper can serve as a reference for readers familiar with the topic.
基金funded by the National Key R&D Program of China(Grant No.2022YFC2903904)the National Natural Science Foundation of China(Grant Nos.51904057 and U1906208).
文摘Due to the heterogeneity of rock masses and the variability of in situ stress,the traditional linear inversion method is insufficiently accurate to achieve high accuracy of the in situ stress field.To address this challenge,nonlinear stress boundaries for a numerical model are determined through regression analysis of a series of nonlinear coefficient matrices,which are derived from the bubbling method.Considering the randomness and flexibility of the bubbling method,a parametric study is conducted to determine recommended ranges for these parameters,including the standard deviation(σb)of bubble radii,the non-uniform coefficient matrix number(λ)for nonlinear stress boundaries,and the number(m)and positions of in situ stress measurement points.A model case study provides a reference for the selection of these parameters.Additionally,when the nonlinear in situ stress inversion method is employed,stress distortion inevitably occurs near model boundaries,aligning with the Saint Venant's principle.Two strategies are proposed accordingly:employing a systematic reduction of nonlinear coefficients to achieve high inversion accuracy while minimizing significant stress distortion,and excluding regions with severe stress distortion near the model edges while utilizing the central part of the model for subsequent simulations.These two strategies have been successfully implemented in the nonlinear in situ stress inversion of the Xincheng Gold Mine and have achieved higher inversion accuracy than the linear method.Specifically,the linear and nonlinear inversion methods yield root mean square errors(RMSE)of 4.15 and 3.2,and inversion relative errors(δAve)of 22.08%and 17.55%,respectively.Therefore,the nonlinear inversion method outperforms the traditional multiple linear regression method,even in the presence of a systematic reduction in the nonlinear stress boundaries.
文摘Incremental Nonlinear Dynamic Inversion(INDI)is a control approach that has gained popularity in flight control over the past decade.Besides the INDI law,several common additional components complement an INDI-based controller.This paper,the second part of a two-part series of surveys on INDI,aims to summarize the modern trends in INDI and its related components.Besides a comprehensive components specification,it addresses their most common challenges,compares different variants,and discusses proposed advances.Further important aspects of INDI are gain design,stability,and robustness.This paper also provides an overview of research conducted concerning these aspects.This paper is written in a tutorial style to familiarize researchers with the essential specifics and pitfalls of INDI and its components.At the same time,it can also serve as a reference for readers already familiar with INDI.
基金supported in part by the National Natural Science Foundation of China(62322311,62303162,62233007,62203157)the Technology Development Program of Henan Province(242102211052).
文摘Dear Editor,In this letter,several novel controllability results for a class of linear switched and impulsive systems are established.Different from the developed controllability conditions in most existing literature,the important role of switched and impulsive time sequence is considered.Applying the relevant geometric theory of matrix,a necessary and sufficient criterion for the controllability is firstly developed to judge when the controllability of such systems is affected by switched and impulsive time sequence.Furthermore,we further obtain a sufficient controllability condition that can be used to verify the controllability of such systems regardless of the switched and impulsive time sequence.Finally,a numerical example is given to verify the obtained theoretical results.
基金supported by the National Natural Science Foundation of China(Grant Nos.12027811 and 51790524).
文摘We have designed,assembled,and tested a 4-MA,60-ns fast linear transformer driver(LTD),which is the first operating generator featuring multiple LTD modules connected in parallel.The LTD-based accelerator comprises six modules in parallel,each of which has ten-stage cavities stacked in series.The six LTD modules are connected to a water tank of diameter 6 m via a 3-m-long impedance-matched deionized waterinsulated coaxial transmission line.In the water tank,the electrical pulses are transmitted down by six horizontal tri-plate transmission lines.A 2.1-m-diameter two-level vacuum insulator stack is utilized to separate the deionized water region from the vacuum region.In the vacuum,the currents are further transported downstream by a two-level magnetically insulated transmission-line and then converged through four post-hole convolutes.Plasma radiation loads or bremsstrahlung electron beam diodes serve as loads that are expected to generate intense soft X rays or warm X rays.The machine is 3.2 m in height and 22 m in outer diameter,including support systems such as a high-voltage charge supply,magnetic core reset system,trigger system,and support platform for inner stalk installation and maintenance.A total of 1440 individual±100-kV multi-gap spark switches and 2880 individual 100-kV capacitors are employed in the accelerator.A total of 12 fiberoptic laser-controlled trigger generators combining photoconductive and traditional gas spark switch technologies are used to realize the synchronous discharge of the more than 1000 gas switches.At an LTD charge voltage of±85 kV,the accelerator stores an initial energy of about 300 kJ and is expected to deliver a current of 3–5 MA into various loads.To date,the LTD facility has shot into a thick-walled aluminum liner load and a reflex triode load.With a thick-walled aluminum liner of inductance 1.81 nH,a current with peak up to 4.1 MA and rise time(10%–90%)of about 60 ns has been achieved.The current transport efficiency from the insulator stack to the liner load approaches 100%during peak times.The LTD accelerator has been used to drive reflex triode loads generating warm X rays with high energy fluence and large radiation area.It has been demonstrated that this LTD is a promising and high-efficiency prime pulsed power source suitable for use in constructing the next generation of large-scale accelerators with currents of tens of megaamperes.
基金supported by the National Science and Technology Innovation 2030-Major Program(2022ZD 0115403)the National Natural Science Foundation of China(61991414)+1 种基金Chongqing Natural Science Foundation(CSTB2023NSCQJQX0018)Beijing Natural Science Foundation(L221005)
文摘Dear Editor,This letter studies output consensus problem of heterogeneous linear multiagent systems over directed graphs. A novel adaptive dynamic event-triggered controller is presented based only on the feedback combination of the agent's own state and neighbors' output,which can achieve exponential output consensus through intermittent communication. The controller is obtained by solving two linear matrix equations, and Zeno behavior is excluded.
基金supported by the Innovation Capability Improvement Project of Hebei Province,China(Grant No.22567605H).
文摘We study the existence and stability of dark-gap solitons in linear lattice and nonlinear lattices.The results indicate that the combination of linear and nonlinear lattices gives dark-gap solitons unique properties.The linear lattice can stabilize dark-gap solitons,while the nonlinear lattice reduces the stability of dark-gap solitons.On the basis of numerical analysis,we investigate the effects of lattice depth,chemical potential,nonlinear lattice amplitude,and nonlinear lattice period on the soliton in mixed lattices with the same and different periods.The stability of dark-gap soliton is studied carefully by means of real-time evolution and linear stability analysis.Dark-gap solitons can exist stably in the band gap,but the solitons formed by the mixed lattices are slightly different when the period is the same or different.
基金Project supported by the National Natural Science Foundation of China(Nos.12272242 and U1934201)。
文摘Piecewise linear systems are prevalent in engineering practice,and can be categorized into symmetric and asymmetric piecewise linear systems.Considering that symmetry is a special case of asymmetry,it is essential to investigate the broader model,namely the asymmetric piecewise linear system.The traditional averaging method is frequently used for studying nonlinear systems,particularly symmetric piecewise linear systems,with the harmonic response of the oscillator serving as a key prerequisite for calculating steady-state solutions.However,asymmetric systems inherently exhibit nonharmonic,asymmetric responses,rendering the traditional averaging method inapplicable.To overcome this limitation,this paper introduces an improved averaging method tailored for an oscillator characterized by asymmetric gaps and springs.Unlike the traditional method,which assumes a purely harmonic response,the improved averaging method redefines the system response as a superposition of a direct current(DC)term and a first harmonic component.Herein,the DC term can be regarded as the offset induced by model asymmetry.Furthermore,the DC term is treated as a slow variable function of time,with its time derivative assumed to be zero when calculating the steady-state solution,akin to the amplitude and phase in the traditional averaging method.Numerical validation demonstrates that the responses computed in both time and frequency domains with the improved averaging method exhibit greater accuracy compared with those derived from the traditional method.Leveraging these improved results,the study also examines the parameter effect,stability,and bifurcation phenomena within the amplitude-frequency responses.
基金supported in part by the National Natural Science Foundation of China under Grants 52307049 and U23A20644in part by the Fundamental Research Funds for the Central Universities under Grant JZ2023HGTB0243+1 种基金in part by the Key Laboratory of Electric Drive and Control of Anhui Province under Grant DQKJ202403in part by the China Postdoctoral Science Foundation under Grant 2024M751073。
文摘The arc-linear motor(ALM) is a new type of special motor derived from the linear motor, which has the merits of high torque, compact structure and fast dynamic response. This kind of motor does not need a complex intermediate transmission device, it is used in some direct-drive applications for continuous rotation or limited angle motion. However, there is no systematic summary and generalization of the ALMs so far.Therefore, this paper systematically overviews the recent advances in ALMs for direct-drive systems. First, the evolution process and basic structure of the ALM are introduced. And then, various ALMs are reviewed with particular reference to motor topologies, working principle, motor performance,optimization design and control techniques. To heel, a comprehensive comparison of several typical ALMs is carried out. Finally, the application areas, main challenges and development trends of the ALMs are highlighted.
文摘In this study,a dynamic model for an inverted pendulum system(IPS)attached to a car is created,and two different control methods are applied to control the system.The designed control algorithms aim to stabilize the pendulum arms in the upright position and the car to reach the equilibrium position.Grey Wolf Optimization-based Linear Quadratic Regulator(GWO-LQR)and GWO-based Fuzzy LQR(FLQR)control algorithms are used in the control process.To improve the performance of the LQR and FLQR methods,the optimum values of the coefficients corresponding to the foot points of the membership functions are determined by the GWO algorithm.Both a graphic and a numerical analysis of the outcomes are provided.In the comparative analysis,it is observed that the GWO-based FLQR method reduces the settling time by 22.58% and the maximum peak value by 18.2% when evaluated in terms of the angular response of the pendulum arm.Furthermore,this approach outperformed comparable research in the literature with a settling time of 2.4 s.These findings demonstrate that the suggested GWO-based FLQR controlmethod outperforms existing literature in terms of the time required for the pendulum arm to reach equilibrium.
基金National Natural Science Foundation of China under Grant No.U2139208。
文摘Natural soil generally exhibits significant transverse isotropy(TI)due to weathering and sedimentation,meaning that horizontal moduli differ from their vertical counterpart.The TI mechanical model is more appropriate for actual situations.Although soil exhibits material nonlinearity under earthquake excitation,existing research on the TI medium is limited to soil linearity and neglects the nonlinear response of TI sites.A 2D equivalent linear model for a layered TI half-space subjected to seismic waves is derived in the transformed wave number domain using the exact dynamic stiffness matrix of the TI medium.This study introduces a method for determining the effective shear strain of TI sites under oblique wave incidence,and further describes a systematic study on the effects of TI parameters and soil nonlinearity on site responses.Numerical results indicate that seismic responses of the TI medium significantly differ from those of isotropic sites and that the responses are highly dependent on TI parameters,particularly in nonlinear cases,while also being sensitive to incident angle and excitation intensity.Moreover,the differences in peak acceleration and waveform for various TI materials may also be amplified due to the strong nonlinearity.The study provides valuable insights for improving the accuracy of seismic response analysis in engineering applications.
基金financially supported by the National Natural Science Foundation of China(Nos.52201233,52371204,and 52031014).
文摘We report a systematic study on the transport properties of(Bi_(0.2)Sb_(0.8))_(2)Te_(3)and(Bi_(0.4)Sb_(0.6))_(2)Te_(3)nanoplates with a thickness of about 6 nm grown by chemical vapor deposition(CVD)on Si/SiO_(2)substrate.We achieve a significant ambipolar field effect in the two samples with different compositions by applying back-gate voltage,successfully tuning the Fermi level across the Dirac point of surface states.It is found that the Hall resistance exhibits strong non-linear behavior and magnetic field induced sign change of the slope when the Fermi level is near the Dirac point,indicating the coexistence of n-type and p-type carriers.Moreover,this coincides with the striking crossover from weak antilocalization(WAL)to linear magnetoresistance(LMR).These gate and temperature dependent magneto-transport studies provide a deeper insight into the nature of LMR and WAL in topological materials.
基金supported by the National Natural Science Foundation of China(Grant No.11974420).
文摘We study the thermodynamic properties of the classical one-dimensional generalized nonlinear Klein-Gordon lattice model(n≥2)by using the cluster variation method with linear response theory.The results of this method are exact in the thermodynamic limit.We present the single-site reduced densityρ^((1))(z),averages such as(z^(2)),<|z^(n)|>,and<(z_(1)-z_(2))^(2)>,the specific heat C_(v),and the static correlation functions.We analyze the scaling behavior of these quantities and obtain the exact scaling powers at the low and high temperatures.Using these results,we gauge the accuracy of the projective truncation approximation for theφ^(4)lattice model.
基金supported by the National Nature Science Foundation of China(U21A20166)the Science and Technology Development Foundation of Jilin Province(20230508095RC)+2 种基金the Major Science and Technology Projects of Jilin Province and Changchun City(20220301033GX)the Development and Reform Commission Foundation of Jilin Province(2023C034-3)the Interdisciplinary Integration and Innovation Project of JLU(JLUXKJC2020202).
文摘Dear Editor,Aiming at the consensus tracking problem of a class of unknown heterogeneous nonlinear multiagent systems(MASs)with input constraints,a novel data-driven iterative learning consensus control(ILCC)protocol based on zeroing neural networks(ZNNs)is proposed.First,a dynamic linearization data model(DLDM)is acquired via dynamic linearization technology(DLT).
基金Sponsored by the National Natural Science Foundation of China and the Research Grants Council of Hong Kong Joint Research Scheme(Grant No.60731160626)the National Natural Science Foundation of China(Grant No.60821001and61003287)+1 种基金the 111 Project(Grant No.B08004)the Fundamental Research Funds for the Central Universities(Grant No.BUPT2009RC0220)
文摘Fong et al.analyzed variable-rate linear network coding for linear broadcast.However,the authors didn't investigate it for the other three types of linear network codes.In this paper,by simple and clear proofs,it is found that there are similar results for variable-rate linear generic and linear dispersion if the field size is large enough.It means that linear generics and linear dispersions of different dimensions can be implemented on the same network,while each non-source node is required to store only one copy of the local encoding kernel within a session.Moreover,an example is given to show that there isn't a similar result for linear multicast.
基金supported by the National Natural Science Foundation of China(Nos.52074228,52305420,and 51875470)the China Postdoctoral Science Foundation(No.2023M742830)。
文摘GH4169 joints manufactured by Linear Friction Welding(LFW)are subjected to tensile test and stair-case method to evaluate the High Cycle Fatigue(HCF)performance at 650℃.The yield and ultimate tensile strengths are 582 MPa and 820 MPa,respectively.The HCF strength of joint reaches 400 MPa,which is slightly lower than that of Base Metal(BM),indicating reliable quality of this type of joint.The microstructure observation results show that all cracks initiate at the inside of specimens and transfer into deeper region with decrease of external stress,and the crack initiation site is related with microhardness of matrix.The Electron Backscattered Diffraction(EBSD)results of the observed regions with different distances to fracture show that plastic deformation plays a key role in HCF,and the Schmid factor of most grains near fracture exceeds 0.4.In addition,the generation of twins plays a vital role in strain concentration release and coordinating plastic deformation among grains.
