The application of the Euclidean division theorem for the positive integers allowed us to establish a set which contains all the prime numbers and this set we called it set of supposedly prime numbers and we noted it ...The application of the Euclidean division theorem for the positive integers allowed us to establish a set which contains all the prime numbers and this set we called it set of supposedly prime numbers and we noted it E<sub>sp</sub>. We subsequently established from the previous set the set of non-prime numbers (the set of numbers belonging to this set and which are not prime) denoted E<sub>np</sub>. We then extracted from the set of supposedly prime numbers the numbers which are not prime and the set of remaining number constitutes the set of prime numbers denoted E<sub>p</sub>. We have deduced from the previous set, the set of prime numbers between two natural numbers. We have explained during our demonstrations the origin of the twin prime numbers and the structure of the chain of prime numbers.展开更多
We report a novel battery-less wireless current sensor node without an analog to digital converter (ADC). If a capacitor is charged using a current transformer (CT) and a rectifying circuit, the charging time depends ...We report a novel battery-less wireless current sensor node without an analog to digital converter (ADC). If a capacitor is charged using a current transformer (CT) and a rectifying circuit, the charging time depends on the current flowing through a power line. In the case that the node transmits data every time when voltage of the capacitor exceeds a threshold voltage, we can indirectly measure the current by measuring the transmission intervals. In this method, the circuit of the node can be simplified and power consumption for the wireless transmission can be decreased because the measured current data does not need to be included in the transmitted packet. However, the measurable range is about single digit because the transmission interval decreases suddenly as the current increases. In this work, we have ex- panded the range using one CT, one wireless transmission module, and two charging circuits that include different load resistors connected in series. The results indicated that the measurable range was from 0.5 A to 50 A.展开更多
Existing researches on no-moving part valves in valve-less piezoelectric pumps mainly concentrate on pipeline valves and chamber bottom valves, which leads to the complex structure and manufacturing process of pump ch...Existing researches on no-moving part valves in valve-less piezoelectric pumps mainly concentrate on pipeline valves and chamber bottom valves, which leads to the complex structure and manufacturing process of pump channel and chamber bottom. Furthermore, position fixed valves with respect to the inlet and outlet also makes the adjustability and controllability of flow rate worse. In order to overcome these shortcomings, this paper puts forward a novel implantable structure of valve-less piezoelectric pump with hemisphere-segments in the pump chamber. Based on the theory of flow around bluff-body, the flow resistance on the spherical and round surface of hemisphere-segment is different when fluid flows through, and the macroscopic flow resistance differences thus formed are also different. A novel valve-less piezoelectric pump with hemisphere-segment bluff-body （HSBB） is presented and designed. HSBB is the no-moving part valve. By the method of volume and momentum comparison, the stress on the bluff-body in the pump chamber is analyzed. The essential reason of unidirectional fluid pumping is expounded, and the flow rate formula is obtained. To verify the theory, a prototype is produced. By using the prototype, experimental research on the relationship between flow rate, pressure difference, voltage, and frequency has been carried out, which proves the correctness of the above theory. This prototype has six hemisphere-segments in the chamber filled with water, and the effective diameter of the piezoelectric bimorph is 30mm. The experiment result shows that the flow rate can reach 0.50 mL/s at the frequency of 6 Hz and the voltage of 110 V. Besides, the pressure difference can reach 26.2 mm H20 at the frequency of 6 Hz and the voltage of 160 V. This research proposes a valve-less piezoelectric pump with hemisphere-segment bluff-body, and its validity and feasibility is verified through theoretical analysis and experiment.展开更多
The certificateless authenticated key agreement protocol proposed by Mandt et al does not haVE the property of key-compromise impersonation （K-CI） resilience. An improved protocol with a simple modification of their...The certificateless authenticated key agreement protocol proposed by Mandt et al does not haVE the property of key-compromise impersonation （K-CI） resilience. An improved protocol with a simple modification of their protocol is proposed in this paper. In particular, our improved protocol is proved to be immune to the K-CI attack and at the same time possess other security properties.展开更多
Compared with the conventional casting process, digital pattern-less casting technology has many advantages such as good machining accuracy, a short processing cycle, and low production cost. It is a new rapid manufac...Compared with the conventional casting process, digital pattern-less casting technology has many advantages such as good machining accuracy, a short processing cycle, and low production cost. It is a new rapid manufacturing technology for castings, integrated with CAD/CAM, casting, CNC machining and many other advanced technologies. With this digital casting technology, no pattern is needed for making molds; it is precise, f lexible, and green. Usually, art castings have complex structures and are made in small batches or even made in a single-piece, especially for large-sized art castings. So it has the shortcomings of high cost, low eff iciency and long time for making a pattern to produce art castings with the conventional casting processes. However, the digital pattern-less casting technology can be applied to fabricate art castings, since it can greatly shorten the manufacturing cycle and lower the production cost, thus having a very good prospect. In this study, based on the digital pattern-less casting technology, a plaque casting with artistic Chinese characters(a Chinese poem) was designed and manufactured, and the production process was demonstrated in detail.展开更多
To perform an accurate fire-and-forget attack of seeker-less missile with the consideration of the localization error, a new cooperative guidance strategy of multi-missiles is proposed in this work. Firstly, an estima...To perform an accurate fire-and-forget attack of seeker-less missile with the consideration of the localization error, a new cooperative guidance strategy of multi-missiles is proposed in this work. Firstly, an estimated position of the seeker-less missile is carefully selected, based on which the slant angle of the line between the estimated and real positions of the seeker-less missile is approximately derived inspired by the localization theory of GPS(Global Position System).Then, respectively based on the guidance law considering the impact angle and time constraints, the consensus theory and the finite-time convergence approach, three cooperative guidance laws employing the previously obtained slant angle are derived for intensive attack to address either a stationary or maneuvering target. Simulation results well demonstrate the effectiveness and advantages of the proposed cooperative guidance strategy.展开更多
AIM To design a miniature magnetically anchored and controlled camera system to reduce the number of trocars which are required for laparoscopy.METHODS The system consists of a miniature magnetically anchored camera w...AIM To design a miniature magnetically anchored and controlled camera system to reduce the number of trocars which are required for laparoscopy.METHODS The system consists of a miniature magnetically anchored camera with a 30° downward angle, an external magnetically anchored unit, and a vision output device. The camera weighs 12 g, measures Φ10.5 mm × 55 mm and has two magnets, a vision model, a light source, and a metal hexagonal nut. To test the prototype, the camera was inserted through a 12-mm conventional trocar in an ex vivo real liver laparoscopic training system. A trocar-less laparoscopic cholecystectomy was performed 6 times using a 12-mm and a 5-mm conventional trocar. In addition, the same procedure was performed in four canine models.RESULTS Both procedures were successfully performed using only two conventional laparoscopic trocars. The cholecystectomy was completed without any major complication in 42 min(38-45 min) in vitro and in 50 min(45-53 min) using an animal model. This camera was anchored and controlled by an external unit magnetically anchored on the abdominal wall. The camera could generate excellent image. with no instrument collisions.CONCLUSION The camera system we designed provides excellent optics and can be easily maneuvered. The number of conventional trocars is reduced without adding technical difficulties.展开更多
The trend toward lead-free or lead-less perovskite solar cells(PSCs) has attracted increasing attention over the past few years because the toxicity of lead(Pb) is one of the substantial restrictions for large-scale a...The trend toward lead-free or lead-less perovskite solar cells(PSCs) has attracted increasing attention over the past few years because the toxicity of lead(Pb) is one of the substantial restrictions for large-scale applications. Researchers have investigated the viability of substituting Pb with other elements(group 14 elements, group 2 elements, transition-metal elements, and group 13 and 15 elements) in the three-dimensional(3 D) perovskites by theoretical calculations and experimental explorations. In this paper, recent research progress in Pb-less and Pb-free PSCs on the perovskite compositions, deposition methods, and device structures are summarized and the main problems that hinder the enhancement of device efficiency and stability are discussed in detail. To date, the fully Sn-based PSCs have shown a power conversion efficiency(PCE) of 8.12% and poor device stability. However, lead-less PSCs have shown higher PCE and a better stability. In addition, the introduction of double-perovskite materials also draws researchers' attention. We believe that the engineering of elemental composition, perovskite deposition methods, and interfacial modification are critical for the future development of Pb-less and Pb-free PSCs.展开更多
The circumferential burden distribution of bell-less top with two parallel hoppers was analyzed to obtain the expressions of burden flux and uneven ratio. The four-batch feeding spirally with two parallel hoppers was ...The circumferential burden distribution of bell-less top with two parallel hoppers was analyzed to obtain the expressions of burden flux and uneven ratio. The four-batch feeding spirally with two parallel hoppers was proposed to realize even burden distribution by uneven flux, ensuring reasonable distribution of BF gas and effective usage of heat energy and chemical energy of gas as well as stable BF production with higher quality and lower consumption.展开更多
Some places in Henan Province are investigated by using sample surveys and interviews. Result shows that land circulation in less developed agricultural area of Henan Province has the characteristics of small scale,si...Some places in Henan Province are investigated by using sample surveys and interviews. Result shows that land circulation in less developed agricultural area of Henan Province has the characteristics of small scale,single form,short period,and circulation land in economic core region. Problems in land circulation are as follows:slow transfer of rural surplus labor force,hard implementation of fundamental land circulation,complicated mentality towards rural land circulation,many misgivings about land circulation,the unformed social service system of land circulation,and imperfect agricultural risk prevention mechanism for circulated land use. Based on the characteristics of land circulation,suggestions for promoting the land circulation of less developed agricultural areas are put forward in order to solve the problems in land circulation and to lay the foundation for effective implementation of land circulation,such as speeding up the development of urbanization,developing the circulation of collective land,effectively implementing the laws and regulations of rural collective land circulation,transferring land according to law,establishing market mechanism of agricultural land circulation,promoting the agricultural industrialization,establishing market mechanism of agricultural land circulation,promoting the agricultural industrialization,energetically readjusting rural industrial structure,and developing economy with local characteristics.展开更多
The slag melting characteristic of slag forming and slag splashing for 300 t BOF less slag process is researched by combining the methods of the slag chemical composition, the melting point determination and the petro...The slag melting characteristic of slag forming and slag splashing for 300 t BOF less slag process is researched by combining the methods of the slag chemical composition, the melting point determination and the petrographic analysis. The results show that the melting point of final slag for less slag smelting is 20 ~C lower than that for conventional smelting. According to results of the petrographic analysis, the C3S （3CaO ~ SiO2） and C2S （2CaO · SiO2） content for less slag smelting are lower than those for conventional smelting, while the RO （FeO, MgO, MnO, etc） phase and C4AF （4CaO · Al2O3· Fe2O3） phase are higher than those for conventional smelting. According to results of the chemical analysis, the （CaO） content and slag basicity for less slag smelting are higher than those for conventional smelting, while （FeO） and （MgO） content in slag for less slag smelting are almost equal to those for conventional smelting. The reason why slag melting point for less slag smelting is lower than that for con- ventional smelting is that the quantity of added fluorite for less slag smelting is more than that for conventional smel- ting. According tO the analysis results the slag melting point is determined by the C3S, C2S, RO phase and C4AF content. According to the results of slag melting characteristic before and after slag splashing for less slag smelting, the present adjusting slag process has little effect. It is important to adjust the composition of BOF final slag. The （FeO） content in slag is to be reduced at the slag splashing and adjusting slag process for less slag smelting.展开更多
Objective： This study investigated the acute and subacute toxicity of whole-plant aqueous extract of Vernonia mespilifolia Less. （AEVM） in rats for evaluating its safety profile. Methods： AEVM for the acute （2000...Objective： This study investigated the acute and subacute toxicity of whole-plant aqueous extract of Vernonia mespilifolia Less. （AEVM） in rats for evaluating its safety profile. Methods： AEVM for the acute （2000 and 5000 mg/kg） and subacute （200, 400 and 600 mg/kg） toxicity studies was administered orally to rats according the guidelines 425 and 407 of Organization for Economic Cooperation and Development, respectively. Food and water intake as well as body and organ weight of animals were recorded. Signs of toxicity were assessed, and hematological, biochemical and histopathological analyses were performed. Results： In the acute toxicity study, a single dose of the aqueous extract at 2000 or 5000 mg/kg caused no mortality in the animals, suggesting that the median lethal dose is greater than 5000 mg/kg. In the subacute toxicity study, administration of the extract for 28 d, at all doses, caused no significant changes in the body weights or organ weights of rats in the treated groups when compared with the control group. In addition, hematological and biochemical parameters also revealed no toxic effects of the extract on rats. Histological sections of the heart, liver and kidney from test animals showed no signs of degen- eration. Conclusion： These results showed that AEVM at dosage levels up to 600 mg/kg is nontoxic and could also offer protection on some body tissues. AEVM could, therefore, be considered safe.展开更多
文摘The application of the Euclidean division theorem for the positive integers allowed us to establish a set which contains all the prime numbers and this set we called it set of supposedly prime numbers and we noted it E<sub>sp</sub>. We subsequently established from the previous set the set of non-prime numbers (the set of numbers belonging to this set and which are not prime) denoted E<sub>np</sub>. We then extracted from the set of supposedly prime numbers the numbers which are not prime and the set of remaining number constitutes the set of prime numbers denoted E<sub>p</sub>. We have deduced from the previous set, the set of prime numbers between two natural numbers. We have explained during our demonstrations the origin of the twin prime numbers and the structure of the chain of prime numbers.
文摘We report a novel battery-less wireless current sensor node without an analog to digital converter (ADC). If a capacitor is charged using a current transformer (CT) and a rectifying circuit, the charging time depends on the current flowing through a power line. In the case that the node transmits data every time when voltage of the capacitor exceeds a threshold voltage, we can indirectly measure the current by measuring the transmission intervals. In this method, the circuit of the node can be simplified and power consumption for the wireless transmission can be decreased because the measured current data does not need to be included in the transmitted packet. However, the measurable range is about single digit because the transmission interval decreases suddenly as the current increases. In this work, we have ex- panded the range using one CT, one wireless transmission module, and two charging circuits that include different load resistors connected in series. The results indicated that the measurable range was from 0.5 A to 50 A.
基金Supported by National Natural Science Foundation of China(Grant No.51375227)Major Research Plan of National Natural Science Foundation of China(Grant No.91223201)Independent Projects Fund of State Key Lab of Mechanics and Control of Mechanical Structures of China(Grant No.0313G01)
文摘Existing researches on no-moving part valves in valve-less piezoelectric pumps mainly concentrate on pipeline valves and chamber bottom valves, which leads to the complex structure and manufacturing process of pump channel and chamber bottom. Furthermore, position fixed valves with respect to the inlet and outlet also makes the adjustability and controllability of flow rate worse. In order to overcome these shortcomings, this paper puts forward a novel implantable structure of valve-less piezoelectric pump with hemisphere-segments in the pump chamber. Based on the theory of flow around bluff-body, the flow resistance on the spherical and round surface of hemisphere-segment is different when fluid flows through, and the macroscopic flow resistance differences thus formed are also different. A novel valve-less piezoelectric pump with hemisphere-segment bluff-body （HSBB） is presented and designed. HSBB is the no-moving part valve. By the method of volume and momentum comparison, the stress on the bluff-body in the pump chamber is analyzed. The essential reason of unidirectional fluid pumping is expounded, and the flow rate formula is obtained. To verify the theory, a prototype is produced. By using the prototype, experimental research on the relationship between flow rate, pressure difference, voltage, and frequency has been carried out, which proves the correctness of the above theory. This prototype has six hemisphere-segments in the chamber filled with water, and the effective diameter of the piezoelectric bimorph is 30mm. The experiment result shows that the flow rate can reach 0.50 mL/s at the frequency of 6 Hz and the voltage of 110 V. Besides, the pressure difference can reach 26.2 mm H20 at the frequency of 6 Hz and the voltage of 160 V. This research proposes a valve-less piezoelectric pump with hemisphere-segment bluff-body, and its validity and feasibility is verified through theoretical analysis and experiment.
基金the National Natural Science Foundation of China (60773086)
文摘The certificateless authenticated key agreement protocol proposed by Mandt et al does not haVE the property of key-compromise impersonation （K-CI） resilience. An improved protocol with a simple modification of their protocol is proposed in this paper. In particular, our improved protocol is proved to be immune to the K-CI attack and at the same time possess other security properties.
基金financially supported by the National Natural Science Foundation of China(No.51105257)
文摘Compared with the conventional casting process, digital pattern-less casting technology has many advantages such as good machining accuracy, a short processing cycle, and low production cost. It is a new rapid manufacturing technology for castings, integrated with CAD/CAM, casting, CNC machining and many other advanced technologies. With this digital casting technology, no pattern is needed for making molds; it is precise, f lexible, and green. Usually, art castings have complex structures and are made in small batches or even made in a single-piece, especially for large-sized art castings. So it has the shortcomings of high cost, low eff iciency and long time for making a pattern to produce art castings with the conventional casting processes. However, the digital pattern-less casting technology can be applied to fabricate art castings, since it can greatly shorten the manufacturing cycle and lower the production cost, thus having a very good prospect. In this study, based on the digital pattern-less casting technology, a plaque casting with artistic Chinese characters(a Chinese poem) was designed and manufactured, and the production process was demonstrated in detail.
基金co-supported by the National Natural Science Foundation of China (No. 11532002)the Hongjian Innovation Foundation of China (No. BQ203-HYJJ-Q2018002)
文摘To perform an accurate fire-and-forget attack of seeker-less missile with the consideration of the localization error, a new cooperative guidance strategy of multi-missiles is proposed in this work. Firstly, an estimated position of the seeker-less missile is carefully selected, based on which the slant angle of the line between the estimated and real positions of the seeker-less missile is approximately derived inspired by the localization theory of GPS(Global Position System).Then, respectively based on the guidance law considering the impact angle and time constraints, the consensus theory and the finite-time convergence approach, three cooperative guidance laws employing the previously obtained slant angle are derived for intensive attack to address either a stationary or maneuvering target. Simulation results well demonstrate the effectiveness and advantages of the proposed cooperative guidance strategy.
基金Supported by National Natural Science Foundation of China(Major Instrumental Program)No.81127005the Science and Technology Innovation Project of Shaanxi Province,China,No.S2016TNGY0119
文摘AIM To design a miniature magnetically anchored and controlled camera system to reduce the number of trocars which are required for laparoscopy.METHODS The system consists of a miniature magnetically anchored camera with a 30° downward angle, an external magnetically anchored unit, and a vision output device. The camera weighs 12 g, measures Φ10.5 mm × 55 mm and has two magnets, a vision model, a light source, and a metal hexagonal nut. To test the prototype, the camera was inserted through a 12-mm conventional trocar in an ex vivo real liver laparoscopic training system. A trocar-less laparoscopic cholecystectomy was performed 6 times using a 12-mm and a 5-mm conventional trocar. In addition, the same procedure was performed in four canine models.RESULTS Both procedures were successfully performed using only two conventional laparoscopic trocars. The cholecystectomy was completed without any major complication in 42 min(38-45 min) in vitro and in 50 min(45-53 min) using an animal model. This camera was anchored and controlled by an external unit magnetically anchored on the abdominal wall. The camera could generate excellent image. with no instrument collisions.CONCLUSION The camera system we designed provides excellent optics and can be easily maneuvered. The number of conventional trocars is reduced without adding technical difficulties.
基金financially supported by the National Natural Science Foundation of China (Nos. 51572020 and 51772023)
文摘The trend toward lead-free or lead-less perovskite solar cells(PSCs) has attracted increasing attention over the past few years because the toxicity of lead(Pb) is one of the substantial restrictions for large-scale applications. Researchers have investigated the viability of substituting Pb with other elements(group 14 elements, group 2 elements, transition-metal elements, and group 13 and 15 elements) in the three-dimensional(3 D) perovskites by theoretical calculations and experimental explorations. In this paper, recent research progress in Pb-less and Pb-free PSCs on the perovskite compositions, deposition methods, and device structures are summarized and the main problems that hinder the enhancement of device efficiency and stability are discussed in detail. To date, the fully Sn-based PSCs have shown a power conversion efficiency(PCE) of 8.12% and poor device stability. However, lead-less PSCs have shown higher PCE and a better stability. In addition, the introduction of double-perovskite materials also draws researchers' attention. We believe that the engineering of elemental composition, perovskite deposition methods, and interfacial modification are critical for the future development of Pb-less and Pb-free PSCs.
文摘The circumferential burden distribution of bell-less top with two parallel hoppers was analyzed to obtain the expressions of burden flux and uneven ratio. The four-batch feeding spirally with two parallel hoppers was proposed to realize even burden distribution by uneven flux, ensuring reasonable distribution of BF gas and effective usage of heat energy and chemical energy of gas as well as stable BF production with higher quality and lower consumption.
基金Supported by the Soft Science Research Program of Hubei Provincial Science & Technology Department (0413020310)
文摘Some places in Henan Province are investigated by using sample surveys and interviews. Result shows that land circulation in less developed agricultural area of Henan Province has the characteristics of small scale,single form,short period,and circulation land in economic core region. Problems in land circulation are as follows:slow transfer of rural surplus labor force,hard implementation of fundamental land circulation,complicated mentality towards rural land circulation,many misgivings about land circulation,the unformed social service system of land circulation,and imperfect agricultural risk prevention mechanism for circulated land use. Based on the characteristics of land circulation,suggestions for promoting the land circulation of less developed agricultural areas are put forward in order to solve the problems in land circulation and to lay the foundation for effective implementation of land circulation,such as speeding up the development of urbanization,developing the circulation of collective land,effectively implementing the laws and regulations of rural collective land circulation,transferring land according to law,establishing market mechanism of agricultural land circulation,promoting the agricultural industrialization,establishing market mechanism of agricultural land circulation,promoting the agricultural industrialization,energetically readjusting rural industrial structure,and developing economy with local characteristics.
基金Item Sponsored by National Science and Technology Support Program for 11th Five-Year Plan of China(2006BAE03A00)
文摘The slag melting characteristic of slag forming and slag splashing for 300 t BOF less slag process is researched by combining the methods of the slag chemical composition, the melting point determination and the petrographic analysis. The results show that the melting point of final slag for less slag smelting is 20 ~C lower than that for conventional smelting. According to results of the petrographic analysis, the C3S （3CaO ~ SiO2） and C2S （2CaO · SiO2） content for less slag smelting are lower than those for conventional smelting, while the RO （FeO, MgO, MnO, etc） phase and C4AF （4CaO · Al2O3· Fe2O3） phase are higher than those for conventional smelting. According to results of the chemical analysis, the （CaO） content and slag basicity for less slag smelting are higher than those for conventional smelting, while （FeO） and （MgO） content in slag for less slag smelting are almost equal to those for conventional smelting. The reason why slag melting point for less slag smelting is lower than that for con- ventional smelting is that the quantity of added fluorite for less slag smelting is more than that for conventional smel- ting. According tO the analysis results the slag melting point is determined by the C3S, C2S, RO phase and C4AF content. According to the results of slag melting characteristic before and after slag splashing for less slag smelting, the present adjusting slag process has little effect. It is important to adjust the composition of BOF final slag. The （FeO） content in slag is to be reduced at the slag splashing and adjusting slag process for less slag smelting.
基金the financial support of Govan Mbeki Research Development Centre, University of Fort Hare, South Africa.Grant number C127
文摘Objective： This study investigated the acute and subacute toxicity of whole-plant aqueous extract of Vernonia mespilifolia Less. （AEVM） in rats for evaluating its safety profile. Methods： AEVM for the acute （2000 and 5000 mg/kg） and subacute （200, 400 and 600 mg/kg） toxicity studies was administered orally to rats according the guidelines 425 and 407 of Organization for Economic Cooperation and Development, respectively. Food and water intake as well as body and organ weight of animals were recorded. Signs of toxicity were assessed, and hematological, biochemical and histopathological analyses were performed. Results： In the acute toxicity study, a single dose of the aqueous extract at 2000 or 5000 mg/kg caused no mortality in the animals, suggesting that the median lethal dose is greater than 5000 mg/kg. In the subacute toxicity study, administration of the extract for 28 d, at all doses, caused no significant changes in the body weights or organ weights of rats in the treated groups when compared with the control group. In addition, hematological and biochemical parameters also revealed no toxic effects of the extract on rats. Histological sections of the heart, liver and kidney from test animals showed no signs of degen- eration. Conclusion： These results showed that AEVM at dosage levels up to 600 mg/kg is nontoxic and could also offer protection on some body tissues. AEVM could, therefore, be considered safe.
