This research describes an integrated multi-channel high accuracy current control LED （light emitting diode） driver with low dropout regulator implemented in a 0.35μm TSMC 2P4M CMOS process. With the new trend of b...This research describes an integrated multi-channel high accuracy current control LED （light emitting diode） driver with low dropout regulator implemented in a 0.35μm TSMC 2P4M CMOS process. With the new trend of backlighting applications for mobile electronics and portable devices requiring a smaller size, lower cost, lesser noise and accurate current control LED driver, it came up with the idea of integrating more than one design features within a single chip. The analysis of using a capacitor-less low dropout regulator to power the constant current source has been explored, with the implementation of wide range battery voltage of 3 V to 5 V. Possible load current variations were introduced and verified to output a fixed voltage of 2.8 V. A regulated cascode current mirror structure forms the multi-channel configuration string of LED＇s; the design ensures a current matching of less than 1% error and achieves a high accuracy current control of less than 1% error, regardless of the LED＇s forward voltage variation. Moreover, for high end portable device with multimedia applications, dimming frequency can be set to 10 MHz. In addition, a switching output is a better approach for managing LED＇s contrast and brightness adjustment as well as maximizing power consumption, ensuring longer life for driving string of LEDs.展开更多
A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacito...A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacitor voltage and maintained by a feedback. The circuit has been fabricated in a standard 0.35 μm AMS CMOS process. Measurement results demonstrated a power-conversion efficiency over 90% with a line regulation of 8%/V for input voltage of 3.3 V and current output between 200 mA and 350 mA.展开更多
A high performance white light emitter diode （LED） driver based on boost converter with novel single-wire serial-pulse digital dimming （SWSP） is proposed. The driver uses external serial programmed pulses and inte...A high performance white light emitter diode （LED） driver based on boost converter with novel single-wire serial-pulse digital dimming （SWSP） is proposed. The driver uses external serial programmed pulses and internal clock to simplify brightness control By embedding a 5-bit digital analog converter （DAC） into the driver, wide dimming range is achieved. Moreover, a new dynamic slope compensation circuit is presented and other key circuits of the driver are optimized to get higher efficiency and fast transition response. A practical circuit is implemented with 0.6 um bipolar complementary-metal-oxide-semiconductor double-diffused-metal-oxide-semiconductor （BCD） technology. The simulation results show that the driver can provide both wide output current from 1.3 mA to 42 mA with 32-level digital dimming and higher efficiency up to 83% while it works at 1 MHz switching frequency with the input voltage variation from 2.7 V to 5.5 V.展开更多
A high efficiency, high power factor, and linear constant current LED driver based on adaptive seg- mented linear architecture is presented. When the input voltage varied, the proposed LED driver automatically switche...A high efficiency, high power factor, and linear constant current LED driver based on adaptive seg- mented linear architecture is presented. When the input voltage varied, the proposed LED driver automatically switched over LED strings according to the segmented LED voltage drop, which increased the LED lighting time. The efficiency and power factor are improved, while the system design is simplified by this control scheme. Without the usage of electrolytic capacitor and magnetic components, the proposed driver possesses advantages of smaller size, longer lifetime and lower cost over others. The proposed driver is implemented in 0.8 μm 5 V/40 V HVCMOS process, which occupies an active area of 820× 920μm2. The measured results show that the average value of the internal reference voltage is 500 4- 7 mV, with a standard deviation of only 4.629 mV, thus LED current can be set accurately. Under 220 V root mean square 50 Hz utility voltage and the number ratio of the three LED strings being 47 ： 17 ： 16, the system can realize a high power factor of 0.974 and power conversion efficiency of 93.4%.展开更多
A boost LED driver featuring a high PWM dimming ratio and optimized efficiency is presented. This LED driver, which has a low dropout voltage and is able to drive 3-7 LEDs in series with constant output current and fa...A boost LED driver featuring a high PWM dimming ratio and optimized efficiency is presented. This LED driver, which has a low dropout voltage and is able to drive 3-7 LEDs in series with constant output current and fast PWM dimming, provides an alternative technique for brightness adjustment. A dual-path control scheme with automatic switching and state maintenance is proposed. Meanwhile, a cascode current mirror structure is applied with the output transistor multiplexed as an LED PWM dimming transistor. Implemented in 0.5 #m 25 V BCD process, the measurement results show that a voltage conversion range of 5 V input to 6-24 V output with constant output current is obtained. With automatically switching dual-path control and an optimized current mirror, the response time during PWM dimming is reduced to as low as 240 ns and the efficiency keeps above 89% over a wide PWM dimming ratio @ 250 mA output current.展开更多
A fully integrated LED driver based on a current mode PWM boost DC-DC converter with constant output current is proposed. In order to suppress the inrush of current and the overshoot voltage at the start up state, a s...A fully integrated LED driver based on a current mode PWM boost DC-DC converter with constant output current is proposed. In order to suppress the inrush of current and the overshoot voltage at the start up state, a soft-start circuit is adopted. Additionally, to adjust the LED brightness without color variation over the full dimming range and achieve high efficiency, a PWM dimming circuit is presented. Furthermore, to keep the loop stability of the LED driver, an internal slope compensation network is designed to avoid the sub-harmonic oscillation when the duty cycle exceeds 50%. Finally, a UVLO circuit is adopted to improve the reliability of the LED driver against the input voltage changing. The LED driver has been fabricated with a standard 0.5/xm CMOS process, and only occupies 1.21 × 0.76 mm^2. Experimental results show that the brightness of the LED can be adjusted by an off- chip PWM signal with a wide adjusting range. The inductor current and output current increase smoothly over the whole load range. The chip is in the UVLO condition when the input voltage is below 2.18 V and has achieved about 137 μs typical start-up time.展开更多
A single-stage flyback driving integrated circuit （IC） for light-emitting diodes （LEDs） is proposed. With an average primary-side current estimation and negative feedback networks, the driver operates in the bound...A single-stage flyback driving integrated circuit （IC） for light-emitting diodes （LEDs） is proposed. With an average primary-side current estimation and negative feedback networks, the driver operates in the boundary conduction mode （BCM）, while the output current can be derived and regulated precisely. By means of a simple external resistor divider, a compensation voltage is produced on the ISEN pin during the turn-on period of the primary MOSFET to improve the line regulation performance. On the other hand, since the delay time between the time that the secondary diode current reaches zero and the turn-on time of the MOSFET can be automatically adjusted, the MOSFET can always turn on at the valley voltage even if the inductance of the primary winding varies with the output power, resulting in quasi-resonant switching for different primary inductances. The driving IC is fabricated in a Dongbu HiTek＇s 0.35μm bipolar-CMOS-DMOS process. An 18 W LED driver is finally built and tested. Results show that the driver has an average efficiency larger than 86%, a power factor larger than 0.97, and works under the universal input voltage （85-265 V） with the LED current variation within ±0.5%.展开更多
Several improvements have been made to the conventional segmented linear light-emitting diode （LED） driver topology to enhance the performance and reliability of the system. A compensation technology is proposed to ...Several improvements have been made to the conventional segmented linear light-emitting diode （LED） driver topology to enhance the performance and reliability of the system. A compensation technology is proposed to adaptively adjust the impedance of the sensing circuit to keep the output luminance constant in case of line volt- age variations. Based on the proposed technology, an active over temperature protection technique is presented to constrain the averaged LED current according to the junction temperature to prevent the driving IC from overheating. Otherwise, a pulse width modulation dimming circuitry which is compatible with input logic level ranging from 1.8 to 20 V is proposed. The proposed technologies are implemented in a 1.0μm 5/20/500 V BCD technol- ogy with three high voltage MOSFETs integrated on chip. The experimental results show that within 220± 15% V, 50 Hz AC line-voltage variation, the output luminance is restrained to 4% in total. The output luminance can also be effectively controlled by the PWM dimming circuitry, and a dimming range of 95% is achieved with good linearity.展开更多
A novel integrated circuit for driving LED lighting has been proposed, designed and fabricated. Besides the typical parts of LED driver, an integral part was added at the output terminal of error amplifier in the driv...A novel integrated circuit for driving LED lighting has been proposed, designed and fabricated. Besides the typical parts of LED driver, an integral part was added at the output terminal of error amplifier in the driver. In this way, a novel average current mode can be set up to take the place ordinary peak current control mode. In addition, a BUCK low-level topology was adopted, too. It can be used to drive up to eight 1 W HB LED lights with 350 mA constant current. In this way, the LED driver displays high performance, in which output current with less 1% error and total efficiency as high as 96%. The feasibility of the design has been verified by actual measurement on the fabricated chip.展开更多
文摘This research describes an integrated multi-channel high accuracy current control LED （light emitting diode） driver with low dropout regulator implemented in a 0.35μm TSMC 2P4M CMOS process. With the new trend of backlighting applications for mobile electronics and portable devices requiring a smaller size, lower cost, lesser noise and accurate current control LED driver, it came up with the idea of integrating more than one design features within a single chip. The analysis of using a capacitor-less low dropout regulator to power the constant current source has been explored, with the implementation of wide range battery voltage of 3 V to 5 V. Possible load current variations were introduced and verified to output a fixed voltage of 2.8 V. A regulated cascode current mirror structure forms the multi-channel configuration string of LED＇s; the design ensures a current matching of less than 1% error and achieves a high accuracy current control of less than 1% error, regardless of the LED＇s forward voltage variation. Moreover, for high end portable device with multimedia applications, dimming frequency can be set to 10 MHz. In addition, a switching output is a better approach for managing LED＇s contrast and brightness adjustment as well as maximizing power consumption, ensuring longer life for driving string of LEDs.
文摘A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacitor voltage and maintained by a feedback. The circuit has been fabricated in a standard 0.35 μm AMS CMOS process. Measurement results demonstrated a power-conversion efficiency over 90% with a line regulation of 8%/V for input voltage of 3.3 V and current output between 200 mA and 350 mA.
基金supported by the National Natural Science Foundation of China (60776027).
文摘A high performance white light emitter diode （LED） driver based on boost converter with novel single-wire serial-pulse digital dimming （SWSP） is proposed. The driver uses external serial programmed pulses and internal clock to simplify brightness control By embedding a 5-bit digital analog converter （DAC） into the driver, wide dimming range is achieved. Moreover, a new dynamic slope compensation circuit is presented and other key circuits of the driver are optimized to get higher efficiency and fast transition response. A practical circuit is implemented with 0.6 um bipolar complementary-metal-oxide-semiconductor double-diffused-metal-oxide-semiconductor （BCD） technology. The simulation results show that the driver can provide both wide output current from 1.3 mA to 42 mA with 32-level digital dimming and higher efficiency up to 83% while it works at 1 MHz switching frequency with the input voltage variation from 2.7 V to 5.5 V.
基金supported by the National Natural Science Foundation of China(Nos.61234002,61322405,61306044,61376033)
文摘A high efficiency, high power factor, and linear constant current LED driver based on adaptive seg- mented linear architecture is presented. When the input voltage varied, the proposed LED driver automatically switched over LED strings according to the segmented LED voltage drop, which increased the LED lighting time. The efficiency and power factor are improved, while the system design is simplified by this control scheme. Without the usage of electrolytic capacitor and magnetic components, the proposed driver possesses advantages of smaller size, longer lifetime and lower cost over others. The proposed driver is implemented in 0.8 μm 5 V/40 V HVCMOS process, which occupies an active area of 820× 920μm2. The measured results show that the average value of the internal reference voltage is 500 4- 7 mV, with a standard deviation of only 4.629 mV, thus LED current can be set accurately. Under 220 V root mean square 50 Hz utility voltage and the number ratio of the three LED strings being 47 ： 17 ： 16, the system can realize a high power factor of 0.974 and power conversion efficiency of 93.4%.
基金Project supported by the ADI and ASIC Laboratory,China
文摘A boost LED driver featuring a high PWM dimming ratio and optimized efficiency is presented. This LED driver, which has a low dropout voltage and is able to drive 3-7 LEDs in series with constant output current and fast PWM dimming, provides an alternative technique for brightness adjustment. A dual-path control scheme with automatic switching and state maintenance is proposed. Meanwhile, a cascode current mirror structure is applied with the output transistor multiplexed as an LED PWM dimming transistor. Implemented in 0.5 #m 25 V BCD process, the measurement results show that a voltage conversion range of 5 V input to 6-24 V output with constant output current is obtained. With automatically switching dual-path control and an optimized current mirror, the response time during PWM dimming is reduced to as low as 240 ns and the efficiency keeps above 89% over a wide PWM dimming ratio @ 250 mA output current.
基金Project supported by the National Natural Science Foundation of China(No.41274047)the Natural Science Foundation of Jiangsu Province(No.BK2012639)the Changzhou Science and Technology Support(Industrial)Project(No.CE20120074)
文摘A fully integrated LED driver based on a current mode PWM boost DC-DC converter with constant output current is proposed. In order to suppress the inrush of current and the overshoot voltage at the start up state, a soft-start circuit is adopted. Additionally, to adjust the LED brightness without color variation over the full dimming range and achieve high efficiency, a PWM dimming circuit is presented. Furthermore, to keep the loop stability of the LED driver, an internal slope compensation network is designed to avoid the sub-harmonic oscillation when the duty cycle exceeds 50%. Finally, a UVLO circuit is adopted to improve the reliability of the LED driver against the input voltage changing. The LED driver has been fabricated with a standard 0.5/xm CMOS process, and only occupies 1.21 × 0.76 mm^2. Experimental results show that the brightness of the LED can be adjusted by an off- chip PWM signal with a wide adjusting range. The inductor current and output current increase smoothly over the whole load range. The chip is in the UVLO condition when the input voltage is below 2.18 V and has achieved about 137 μs typical start-up time.
文摘A single-stage flyback driving integrated circuit （IC） for light-emitting diodes （LEDs） is proposed. With an average primary-side current estimation and negative feedback networks, the driver operates in the boundary conduction mode （BCM）, while the output current can be derived and regulated precisely. By means of a simple external resistor divider, a compensation voltage is produced on the ISEN pin during the turn-on period of the primary MOSFET to improve the line regulation performance. On the other hand, since the delay time between the time that the secondary diode current reaches zero and the turn-on time of the MOSFET can be automatically adjusted, the MOSFET can always turn on at the valley voltage even if the inductance of the primary winding varies with the output power, resulting in quasi-resonant switching for different primary inductances. The driving IC is fabricated in a Dongbu HiTek＇s 0.35μm bipolar-CMOS-DMOS process. An 18 W LED driver is finally built and tested. Results show that the driver has an average efficiency larger than 86%, a power factor larger than 0.97, and works under the universal input voltage （85-265 V） with the LED current variation within ±0.5%.
基金Project supported by the National Natural Science Foundation of China(No.61106026)
文摘Several improvements have been made to the conventional segmented linear light-emitting diode （LED） driver topology to enhance the performance and reliability of the system. A compensation technology is proposed to adaptively adjust the impedance of the sensing circuit to keep the output luminance constant in case of line volt- age variations. Based on the proposed technology, an active over temperature protection technique is presented to constrain the averaged LED current according to the junction temperature to prevent the driving IC from overheating. Otherwise, a pulse width modulation dimming circuitry which is compatible with input logic level ranging from 1.8 to 20 V is proposed. The proposed technologies are implemented in a 1.0μm 5/20/500 V BCD technol- ogy with three high voltage MOSFETs integrated on chip. The experimental results show that within 220± 15% V, 50 Hz AC line-voltage variation, the output luminance is restrained to 4% in total. The output luminance can also be effectively controlled by the PWM dimming circuitry, and a dimming range of 95% is achieved with good linearity.
文摘A novel integrated circuit for driving LED lighting has been proposed, designed and fabricated. Besides the typical parts of LED driver, an integral part was added at the output terminal of error amplifier in the driver. In this way, a novel average current mode can be set up to take the place ordinary peak current control mode. In addition, a BUCK low-level topology was adopted, too. It can be used to drive up to eight 1 W HB LED lights with 350 mA constant current. In this way, the LED driver displays high performance, in which output current with less 1% error and total efficiency as high as 96%. The feasibility of the design has been verified by actual measurement on the fabricated chip.
