A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced...A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced to reduce the chip size and to increase the bandwidth of operation.The procedure to design a MMIC VCO is also described here.The measured oscillating frequency of the MMIC VCO is 36±1.2GHz and the output power is 10±1dBm.The fabricated MMIC chip size is 1.3mm×1.0mm.展开更多
The performance of a microwave monolithic integrated circuit .（MMIC） amplifier with high output power in the Ka-band is presented. Using 75mm 0.25μm GaAs PHEMT technology provided by the Hebei Semiconductor Researc...The performance of a microwave monolithic integrated circuit .（MMIC） amplifier with high output power in the Ka-band is presented. Using 75mm 0.25μm GaAs PHEMT technology provided by the Hebei Semiconductor Research Institute, this three-stage power amplifier, with a chip size of 19.25mm^2 （3.5mm × 5.5mm）, on 100μm GaAs substrate achieves a linear gain of more than 16dB in the 32.5-35.5GHz frequency range,with an average output power at 1dB gain compression of P1dB = 29. 8dBm and a maximum saturated output power of Psat = 31dBm.展开更多
The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity d...The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity distortion and adjacent channel interference (ACI) in Ka-band satellite channel corrupted by additive white Gaussian noise (AWGN) are taken into account. The analytical expressions of the HER of coherent MPSK and MQAM signal are obtained and shown to be in good agreement with the simulation results.展开更多
This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet ...This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet the requirements for cloud remote sensing over the Tibetan Plateau. Specifically, the design of the three operational modes of the radar（i.e., boundary mode M1, cirrus mode M2, and precipitation mode M3） is introduced. Also, a cloud radar data merging algorithm for the three modes is proposed. Using one month＇s continuous measurements during summertime at Naqu on the Tibetan Plateau,we analyzed the consistency between the cloud radar measurements of the three modes. The number of occurrences of radar detections of hydrometeors and the percentage contributions of the different modes＇ data to the merged data were estimated.The performance of the merging algorithm was evaluated. The results indicated that the minimum detectable reflectivity for each mode was consistent with theoretical results. Merged data provided measurements with a minimum reflectivity of -35 dBZ at the height of 5 km, and obtained information above the height of 0.2 km. Measurements of radial velocity by the three operational modes agreed very well, and systematic errors in measurements of reflectivity were less than 2 dB. However,large discrepancies existed in the measurements of the linear depolarization ratio taken from the different operational modes.The percentage of radar detections of hydrometeors in mid- and high-level clouds increased by 60% through application of pulse compression techniques. In conclusion, the merged data are appropriate for cloud and precipitation studies over the Tibetan Plateau.展开更多
Based on cloud-probe data and airborne Ka-band cloud radar data collected in Baoding on 5 August 2018,the microphysical structural characteristics of cumulus(Cu)cloud at the precipitation stage were investigated.The c...Based on cloud-probe data and airborne Ka-band cloud radar data collected in Baoding on 5 August 2018,the microphysical structural characteristics of cumulus(Cu)cloud at the precipitation stage were investigated.The cloud droplets in the Cu cloud were found to be significantly larger than those in stratiform(STF)cloud.In the Cu cloud,most cloud particles were between 7 and 10μm in diameter,while in the STF cloud the majority of cloud particles grew no larger than 2μm.The sensitivity of cloud properties to aerosols varied with height.The cloud droplet effective radius showed a negative relationship with the aerosol number concentration(Na)in the cloud planetary boundary layer(PBL)and upper layer above the PBL.However,the cloud droplet concentration(Nc)varied little with decreased Na in the high liquid water content region above 1500 m.High Na values of between 300 and 1853 cm-3 were found in the PBL,and the maximum Na was sampled near the surface in August in the Hebei region,which was lower than that in autumn and winter.High radar reflectivity corresponded to large FCDP(fast cloud droplet probe)particle concentrations and small aerosol particle concentrations,and vice versa for low radar reflectivity.Strong updrafts in the Cu cloud increased the peak radius and Nc,and broadened cloud droplet spectrum;lower air temperature was favorable for particle condensational growth and produced larger droplets.展开更多
Design of multiple-feed lens antennas requires multivariate and multi-objective optimization processes,which can be accelerated by PSO algorithms.However,the PSO algorithm often fails to achieve optimal results with l...Design of multiple-feed lens antennas requires multivariate and multi-objective optimization processes,which can be accelerated by PSO algorithms.However,the PSO algorithm often fails to achieve optimal results with limited computation resources since spaces of candidate solutions are quite large for lens antenna designs.This paper presents a design paradigm for multiple-feed lens antennas based on a physics-assisted particle swarm optimization(PA-PSO)algorithm,which guides the swarm of particles based on laws of physics.As a proof of concept,a design of compact metalens antenna is proposed,which measures unprecedented performances,such as a field of view at±55°,a 21.7 dBi gain with a flatness within 4 dB,a 3-dB bandwidth>12°,and a compact design with a f-number of 0.2.The proposed PA-PSO algorithm reaches the optimal results 6 times faster than the ordinary PSO algorithm,which endows promising applications in the multivariate and multi-objective optimization processes,including but not limited to metalens antenna designs.展开更多
In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in ...In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.展开更多
Rain attenuation is the major problem for Ka-band satellite communications, and the fading due to rain can be well described by a lognormally distributed, first-order auto regressive model. Forward Error-control Codin...Rain attenuation is the major problem for Ka-band satellite communications, and the fading due to rain can be well described by a lognormally distributed, first-order auto regressive model. Forward Error-control Coding (FEC) techniques can be used to reduce the effect of the rain attenuation, but the use of FEC causes a reduction in the bandwidth efficiency.In order to increase the bandwidth efficiency as well as maintain high link availability, an Adaptive Forward Error-control Coding (AFEC) scheme with rain fading prediction is proposed and analyzed in this paper. The results show that AFEC offers a good trade-off between link availability and bandwidth efficiency.展开更多
This paper proposes a direct injection-locked frequency divider（ILFD） with a wide locking range in the Ka-band. A complementary cross-coupled architecture is used to enhance the overdriving voltage of the switch tra...This paper proposes a direct injection-locked frequency divider（ILFD） with a wide locking range in the Ka-band. A complementary cross-coupled architecture is used to enhance the overdriving voltage of the switch transistor so that the divider locking range is extended efficiently. New insights into the locking range and output power are proposed. A new method to analyze and optimize the injection sensitivity is presented and a layout technique to reduce the parasitics of the cross-coupled transistors is applied to decrease the frequency shift and the locking range degradation. The circuit is designed in a standard 90-nm CMOS process. The total locking range of the ILFD is 43.8% at 34.5 GHz with an incident power of –3.5 dBm. The divider IC consumes 3.6 mW of power at the supply voltage of 1.2 V. The chip area including the pads is 0.50.5 mm2.展开更多
This investigation explores a low-noise amplifier （LNA） with a coplanar waveguide （CPW） structure, in which a two-stage amplifier is associated with a cascade schematic circuit, implemented in 0.15μm GaAs pseudom...This investigation explores a low-noise amplifier （LNA） with a coplanar waveguide （CPW） structure, in which a two-stage amplifier is associated with a cascade schematic circuit, implemented in 0.15μm GaAs pseudomorphic high electron mobility transistor （pHEMT） technology in a Ka-band （26.540.0 GHz） microwave monolithic integrated circuit （MMIC）. The experimental results demonstrate that the proposed LNA has a peak gain of 12.53 dt3 at 30 GHz and a minimum noise figure of 3.3 dB at 29.5 GHz, when biased at a Vds of 2 V and a Vgs of-0.6 V with a drain current of 16 mA in the circuit. The results show that the millimeter-wave LNA with coplanar waveguide structure has a higher gain and wider bandwidth than a conventional circuit. Finally, the overall LNA characterization exhibits high gain and low noise, indicating that the LNA has a compact circuit and favorable RF characteristics. The strong RF character exhibited by the LNA circuit can be used in millimeter-wave circuit applications.展开更多
The importance of high-performance,low-cost and millimeter-wave transmitters for digital communications and radar applications is increasing.The design and performance of a Ka-band balanced in-phase and quadrature-ph...The importance of high-performance,low-cost and millimeter-wave transmitters for digital communications and radar applications is increasing.The design and performance of a Ka-band balanced in-phase and quadrature-phase（I-Q）type vector modulator,using GaAs heterojunction bipolar transistors（HBTs）as switching elements,are presented.The balanced technique is used to remove the parasitics of the HBTs to result in near perfect constellations.Measurements of the monolithic microwave integrated circuit（MMIC）chip with a size of 1.89×2.26 mm^2 demonstrate an amplitude error below 1.5 dB and the phase error within 3°between 26 and 40 GHz except for a singular point at 35.6 GHz.The results show that the technique is suitable for millimeter-wave digital communications.展开更多
A Ka-band GaN amplifier MMIC has been designed in CPW technology,and fabricated with a domestic GaN epitaxial wafer and process.This is,to the best of our knowledge,the first demonstration of domestic Kaband GaN ampli...A Ka-band GaN amplifier MMIC has been designed in CPW technology,and fabricated with a domestic GaN epitaxial wafer and process.This is,to the best of our knowledge,the first demonstration of domestic Kaband GaN amplifier MMICs.The single stage CPW MMIC utilizes an AlGaN/GaN HEMT with a gate-length of 0.25μm and a gate-width of 2×75μm.Under V_（ds）=10 V,continuous-wave operating conditions,the amplifier has a 1.5 GHz operating bandwidth.It exhibits a linear gain of 6.3 dB,a maximum output power of 22 dBm and a peak PAE of 9.5%at 26.5 GHz.The output power density of the AlGaN/GaN HEMT in the MMIC reaches 1 W/mm at Ka-band under the condition of V_（ds）=10 V.展开更多
以风云四号B星数据Ka频段接收系统为研究对象,采用站址分集策略,在北京气象卫星地面站和乌兰察布气象卫星地面站同步接收卫星数据的支持下,选择信道存取数据单元(Channel Access Data Unit,CADU)数据作为两站间数据匹配的处理单元,通过...以风云四号B星数据Ka频段接收系统为研究对象,采用站址分集策略,在北京气象卫星地面站和乌兰察布气象卫星地面站同步接收卫星数据的支持下,选择信道存取数据单元(Channel Access Data Unit,CADU)数据作为两站间数据匹配的处理单元,通过基于数据质量信息的择优技术,实时将多路数据择优合成为一路高质量数据,实现了我国首个基于站址分集接收策略的卫星接收系统。实际验证结果证明,该策略大大降低了雨衰对Ka频段数据接收的负面影响,也为气象卫星事业高质量发展提供了技术支撑。展开更多
文摘A compact Ka-band monolithic microwave integrated circuit(MMIC) voltage controlled oscillator (VCO) with wide tuning range and high output power,which is based on GaAs PHEMT process,is presented.A method is introduced to reduce the chip size and to increase the bandwidth of operation.The procedure to design a MMIC VCO is also described here.The measured oscillating frequency of the MMIC VCO is 36±1.2GHz and the output power is 10±1dBm.The fabricated MMIC chip size is 1.3mm×1.0mm.
文摘The performance of a microwave monolithic integrated circuit .（MMIC） amplifier with high output power in the Ka-band is presented. Using 75mm 0.25μm GaAs PHEMT technology provided by the Hebei Semiconductor Research Institute, this three-stage power amplifier, with a chip size of 19.25mm^2 （3.5mm × 5.5mm）, on 100μm GaAs substrate achieves a linear gain of more than 16dB in the 32.5-35.5GHz frequency range,with an average output power at 1dB gain compression of P1dB = 29. 8dBm and a maximum saturated output power of Psat = 31dBm.
文摘The performance analysis and simulation of spectrally efficient modulation schemes , MPSK and MQAM, for Ka-band fixed satellite communication system are provided. The effects of bandwidth limitation, nonlinearityity distortion and adjacent channel interference (ACI) in Ka-band satellite channel corrupted by additive white Gaussian noise (AWGN) are taken into account. The analytical expressions of the HER of coherent MPSK and MQAM signal are obtained and shown to be in good agreement with the simulation results.
基金funded by the National Sciences Foundation of China(Grant No.91337103)the China Meteorological Administration Special Public Welfare Research Fund(Grant No.GYHY201406001)
文摘This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet the requirements for cloud remote sensing over the Tibetan Plateau. Specifically, the design of the three operational modes of the radar（i.e., boundary mode M1, cirrus mode M2, and precipitation mode M3） is introduced. Also, a cloud radar data merging algorithm for the three modes is proposed. Using one month＇s continuous measurements during summertime at Naqu on the Tibetan Plateau,we analyzed the consistency between the cloud radar measurements of the three modes. The number of occurrences of radar detections of hydrometeors and the percentage contributions of the different modes＇ data to the merged data were estimated.The performance of the merging algorithm was evaluated. The results indicated that the minimum detectable reflectivity for each mode was consistent with theoretical results. Merged data provided measurements with a minimum reflectivity of -35 dBZ at the height of 5 km, and obtained information above the height of 0.2 km. Measurements of radial velocity by the three operational modes agreed very well, and systematic errors in measurements of reflectivity were less than 2 dB. However,large discrepancies existed in the measurements of the linear depolarization ratio taken from the different operational modes.The percentage of radar detections of hydrometeors in mid- and high-level clouds increased by 60% through application of pulse compression techniques. In conclusion, the merged data are appropriate for cloud and precipitation studies over the Tibetan Plateau.
基金funded by the National Key Research and Devel-opment Program of China[grant number 2017YFC1501405]the National Natural Science Foundation of China[grant numbers 41975180,41705119,and 41575131]the National Center of Meteorology,Abu Dhabi,AE(UAE Research Program for Rain Enhancement Science)。
文摘Based on cloud-probe data and airborne Ka-band cloud radar data collected in Baoding on 5 August 2018,the microphysical structural characteristics of cumulus(Cu)cloud at the precipitation stage were investigated.The cloud droplets in the Cu cloud were found to be significantly larger than those in stratiform(STF)cloud.In the Cu cloud,most cloud particles were between 7 and 10μm in diameter,while in the STF cloud the majority of cloud particles grew no larger than 2μm.The sensitivity of cloud properties to aerosols varied with height.The cloud droplet effective radius showed a negative relationship with the aerosol number concentration(Na)in the cloud planetary boundary layer(PBL)and upper layer above the PBL.However,the cloud droplet concentration(Nc)varied little with decreased Na in the high liquid water content region above 1500 m.High Na values of between 300 and 1853 cm-3 were found in the PBL,and the maximum Na was sampled near the surface in August in the Hebei region,which was lower than that in autumn and winter.High radar reflectivity corresponded to large FCDP(fast cloud droplet probe)particle concentrations and small aerosol particle concentrations,and vice versa for low radar reflectivity.Strong updrafts in the Cu cloud increased the peak radius and Nc,and broadened cloud droplet spectrum;lower air temperature was favorable for particle condensational growth and produced larger droplets.
基金supported by the National Natural Science Foundation of China(61975026,62375232,6237523262205246 and 61875030)Creative Research Groups of the National Natural Science Foundation of Sichuan Province(2023NSFSC1973)+1 种基金the Shanghai Pilot Program for Basic Research,the National Key Research and Development Program of China(No.2023YFF0613600)Science and Technology Commission of Shanghai Municipality(No.22ZR1432400).
文摘Design of multiple-feed lens antennas requires multivariate and multi-objective optimization processes,which can be accelerated by PSO algorithms.However,the PSO algorithm often fails to achieve optimal results with limited computation resources since spaces of candidate solutions are quite large for lens antenna designs.This paper presents a design paradigm for multiple-feed lens antennas based on a physics-assisted particle swarm optimization(PA-PSO)algorithm,which guides the swarm of particles based on laws of physics.As a proof of concept,a design of compact metalens antenna is proposed,which measures unprecedented performances,such as a field of view at±55°,a 21.7 dBi gain with a flatness within 4 dB,a 3-dB bandwidth>12°,and a compact design with a f-number of 0.2.The proposed PA-PSO algorithm reaches the optimal results 6 times faster than the ordinary PSO algorithm,which endows promising applications in the multivariate and multi-objective optimization processes,including but not limited to metalens antenna designs.
文摘In this paper,we have proposed a novel structure of Ka-band based phased array antenna with calibration function.In the design of Kaband antenna,the active phased array system is adopted and the antenna would work in the dual polarization separation mode.We have given out the schematic diagram for the proposed Ka-band antenna,where the Kaband antenna is in the form of waveguide slot array antenna,with 96 units in azimuth and 1 unit in distance.Each group of units is driven by a singlechannel Transmitter/Receiver(T/R)component,and the whole array contains 192 T/R components in total.The size of the T/R component is 55mm(length)×50mm(width)×5.8mm(height),3 Sub-micro Sub-Miniature Push-on(SSMP)blind sockets and a 21-core low-frequency socket are designed on the two sides of the T/R component.In order to meet the technical specifications of phased array antenna,the Ka-band transceiver component is designed based on Low Temperatrue Co-fired Ceramic(LTCC)technology to achieve miniaturization and lightweight.In our approach,the feed network includes two parts:transceiver network and calibration network.The transceiver network consists of 241:8 time-delay power dividers,12 two-way power dividers and 2 six-way time-delay power dividers.The power supply required by theKaband antenna unit is provided to each active component by the power module after Ka band wavelet control distribution.Simulation and measurement results are given in the form of standing wave and scanning capability.
文摘Rain attenuation is the major problem for Ka-band satellite communications, and the fading due to rain can be well described by a lognormally distributed, first-order auto regressive model. Forward Error-control Coding (FEC) techniques can be used to reduce the effect of the rain attenuation, but the use of FEC causes a reduction in the bandwidth efficiency.In order to increase the bandwidth efficiency as well as maintain high link availability, an Adaptive Forward Error-control Coding (AFEC) scheme with rain fading prediction is proposed and analyzed in this paper. The results show that AFEC offers a good trade-off between link availability and bandwidth efficiency.
基金Project supported by the National Basic Research Program(No.2010CB327404)the National High Technology Researchand Development Program of China(No.2011AA10305)+1 种基金the International Cooperation Projects in Science and Technology(No.2011DFA11310)the National Natural Science Foundation of China(Nos.60901012,61106024)
文摘This paper proposes a direct injection-locked frequency divider（ILFD） with a wide locking range in the Ka-band. A complementary cross-coupled architecture is used to enhance the overdriving voltage of the switch transistor so that the divider locking range is extended efficiently. New insights into the locking range and output power are proposed. A new method to analyze and optimize the injection sensitivity is presented and a layout technique to reduce the parasitics of the cross-coupled transistors is applied to decrease the frequency shift and the locking range degradation. The circuit is designed in a standard 90-nm CMOS process. The total locking range of the ILFD is 43.8% at 34.5 GHz with an incident power of –3.5 dBm. The divider IC consumes 3.6 mW of power at the supply voltage of 1.2 V. The chip area including the pads is 0.50.5 mm2.
文摘This investigation explores a low-noise amplifier （LNA） with a coplanar waveguide （CPW） structure, in which a two-stage amplifier is associated with a cascade schematic circuit, implemented in 0.15μm GaAs pseudomorphic high electron mobility transistor （pHEMT） technology in a Ka-band （26.540.0 GHz） microwave monolithic integrated circuit （MMIC）. The experimental results demonstrate that the proposed LNA has a peak gain of 12.53 dt3 at 30 GHz and a minimum noise figure of 3.3 dB at 29.5 GHz, when biased at a Vds of 2 V and a Vgs of-0.6 V with a drain current of 16 mA in the circuit. The results show that the millimeter-wave LNA with coplanar waveguide structure has a higher gain and wider bandwidth than a conventional circuit. Finally, the overall LNA characterization exhibits high gain and low noise, indicating that the LNA has a compact circuit and favorable RF characteristics. The strong RF character exhibited by the LNA circuit can be used in millimeter-wave circuit applications.
基金Project supported by the State Key Development Program for Basic Research of China(No2010CB327505)
文摘The importance of high-performance,low-cost and millimeter-wave transmitters for digital communications and radar applications is increasing.The design and performance of a Ka-band balanced in-phase and quadrature-phase（I-Q）type vector modulator,using GaAs heterojunction bipolar transistors（HBTs）as switching elements,are presented.The balanced technique is used to remove the parasitics of the HBTs to result in near perfect constellations.Measurements of the monolithic microwave integrated circuit（MMIC）chip with a size of 1.89×2.26 mm^2 demonstrate an amplitude error below 1.5 dB and the phase error within 3°between 26 and 40 GHz except for a singular point at 35.6 GHz.The results show that the technique is suitable for millimeter-wave digital communications.
基金Project supported by the National Natural Science Foundation of China(No.60890190)
文摘A Ka-band GaN amplifier MMIC has been designed in CPW technology,and fabricated with a domestic GaN epitaxial wafer and process.This is,to the best of our knowledge,the first demonstration of domestic Kaband GaN amplifier MMICs.The single stage CPW MMIC utilizes an AlGaN/GaN HEMT with a gate-length of 0.25μm and a gate-width of 2×75μm.Under V_（ds）=10 V,continuous-wave operating conditions,the amplifier has a 1.5 GHz operating bandwidth.It exhibits a linear gain of 6.3 dB,a maximum output power of 22 dBm and a peak PAE of 9.5%at 26.5 GHz.The output power density of the AlGaN/GaN HEMT in the MMIC reaches 1 W/mm at Ka-band under the condition of V_（ds）=10 V.
文摘以风云四号B星数据Ka频段接收系统为研究对象,采用站址分集策略,在北京气象卫星地面站和乌兰察布气象卫星地面站同步接收卫星数据的支持下,选择信道存取数据单元(Channel Access Data Unit,CADU)数据作为两站间数据匹配的处理单元,通过基于数据质量信息的择优技术,实时将多路数据择优合成为一路高质量数据,实现了我国首个基于站址分集接收策略的卫星接收系统。实际验证结果证明,该策略大大降低了雨衰对Ka频段数据接收的负面影响,也为气象卫星事业高质量发展提供了技术支撑。
