This paper proposes an equivalent modeling method for photovoltaic(PV)power stations via a particle swarm optimization(PSO)K-means clustering(KMC)algorithm with passive filter parameter clustering to address the compl...This paper proposes an equivalent modeling method for photovoltaic(PV)power stations via a particle swarm optimization(PSO)K-means clustering(KMC)algorithm with passive filter parameter clustering to address the complexities,simulation time cost and convergence problems of detailed PV power station models.First,the amplitude–frequency curves of different filter parameters are analyzed.Based on the results,a grouping parameter set for characterizing the external filter characteristics is established.These parameters are further defined as clustering parameters.A single PV inverter model is then established as a prerequisite foundation.The proposed equivalent method combines the global search capability of PSO with the rapid convergence of KMC,effectively overcoming the tendency of KMC to become trapped in local optima.This approach enhances both clustering accuracy and numerical stability when determining equivalence for PV inverter units.Using the proposed clustering method,both a detailed PV power station model and an equivalent model are developed and compared.Simulation and hardwarein-loop(HIL)results based on the equivalent model verify that the equivalent method accurately represents the dynamic characteristics of PVpower stations and adapts well to different operating conditions.The proposed equivalent modeling method provides an effective analysis tool for future renewable energy integration research.展开更多
Various factors,including weak tie-lines into the electric power system(EPS)networks,can lead to low-frequency oscillations(LFOs),which are considered an instant,non-threatening situation,but slow-acting and poisonous...Various factors,including weak tie-lines into the electric power system(EPS)networks,can lead to low-frequency oscillations(LFOs),which are considered an instant,non-threatening situation,but slow-acting and poisonous.Considering the challenge mentioned,this article proposes a clustering-based machine learning(ML)framework to enhance the stability of EPS networks by suppressing LFOs through real-time tuning of key power system stabilizer(PSS)parameters.To validate the proposed strategy,two distinct EPS networks are selected:the single-machine infinite-bus(SMIB)with a single-stage PSS and the unified power flow controller(UPFC)coordinated SMIB with a double-stage PSS.To generate data under various loading conditions for both networks,an efficient but offline meta-heuristic algorithm,namely the grey wolf optimizer(GWO),is used,with the loading conditions as inputs and the key PSS parameters as outputs.The generated loading conditions are then clustered using the fuzzy k-means(FKM)clustering method.Finally,the group method of data handling(GMDH)and long short-term memory(LSTM)ML models are developed for clustered data to predict PSS key parameters in real time for any loading condition.A few well-known statistical performance indices(SPI)are considered for validation and robustness of the training and testing procedure of the developed FKM-GMDH and FKM-LSTM models based on the prediction of PSS parameters.The performance of the ML models is also evaluated using three stability indices(i.e.,minimum damping ratio,eigenvalues,and time-domain simulations)after optimally tuned PSS with real-time estimated parameters under changing operating conditions.Besides,the outputs of the offline(GWO-based)metaheuristic model,proposed real-time(FKM-GMDH and FKM-LSTM)machine learning models,and previously reported literature models are compared.According to the results,the proposed methodology outperforms the others in enhancing the stability of the selected EPS networks by damping out the observed unwanted LFOs under various loading conditions.展开更多
针对目前城市道路场景中行道树提取方法需要设置的参数较多以及树冠点云相互重叠难以精确分割的问题,文章采用一种行道树提取与单株木分割算法。首先通过布料滤波算法从原始点云中移除地面点,并利用半径滤波滤除离群点,去除地面点和噪...针对目前城市道路场景中行道树提取方法需要设置的参数较多以及树冠点云相互重叠难以精确分割的问题,文章采用一种行道树提取与单株木分割算法。首先通过布料滤波算法从原始点云中移除地面点,并利用半径滤波滤除离群点,去除地面点和噪声点对行道树提取的影响;然后通过增加PointNet++网络的点集抽象模块(set abstraction,SA)提高模型特征提取能力,使模型更适用于行道树点云的提取,并利用改进后的网络从原始点云中提取行道树点云;最后结合密度聚类算法(density-based spatial clustering of applications with noise,DBSCAN)与K-Means算法对相互重叠的行道树点云进行分割,得到单株木信息。为验证该方法的有效性,以北京永昌路道路数据集进行训练测试。结果表明:改进后模型的行道树点云平均提取精度和交并比(intersection over union,IoU)分别提高了9.2%和15.1%,达到了94.5%、0.916;单木分割平均精度达到了91.3%。展开更多
基金supported by the Research Project of China Southern Power Grid(No.056200KK52222031).
文摘This paper proposes an equivalent modeling method for photovoltaic(PV)power stations via a particle swarm optimization(PSO)K-means clustering(KMC)algorithm with passive filter parameter clustering to address the complexities,simulation time cost and convergence problems of detailed PV power station models.First,the amplitude–frequency curves of different filter parameters are analyzed.Based on the results,a grouping parameter set for characterizing the external filter characteristics is established.These parameters are further defined as clustering parameters.A single PV inverter model is then established as a prerequisite foundation.The proposed equivalent method combines the global search capability of PSO with the rapid convergence of KMC,effectively overcoming the tendency of KMC to become trapped in local optima.This approach enhances both clustering accuracy and numerical stability when determining equivalence for PV inverter units.Using the proposed clustering method,both a detailed PV power station model and an equivalent model are developed and compared.Simulation and hardwarein-loop(HIL)results based on the equivalent model verify that the equivalent method accurately represents the dynamic characteristics of PVpower stations and adapts well to different operating conditions.The proposed equivalent modeling method provides an effective analysis tool for future renewable energy integration research.
基金supported by the Deanship of Research at the King Fahd University of Petroleum&Minerals,Dhahran,31261,Saudi Arabia,under Project No.EC241001.
文摘Various factors,including weak tie-lines into the electric power system(EPS)networks,can lead to low-frequency oscillations(LFOs),which are considered an instant,non-threatening situation,but slow-acting and poisonous.Considering the challenge mentioned,this article proposes a clustering-based machine learning(ML)framework to enhance the stability of EPS networks by suppressing LFOs through real-time tuning of key power system stabilizer(PSS)parameters.To validate the proposed strategy,two distinct EPS networks are selected:the single-machine infinite-bus(SMIB)with a single-stage PSS and the unified power flow controller(UPFC)coordinated SMIB with a double-stage PSS.To generate data under various loading conditions for both networks,an efficient but offline meta-heuristic algorithm,namely the grey wolf optimizer(GWO),is used,with the loading conditions as inputs and the key PSS parameters as outputs.The generated loading conditions are then clustered using the fuzzy k-means(FKM)clustering method.Finally,the group method of data handling(GMDH)and long short-term memory(LSTM)ML models are developed for clustered data to predict PSS key parameters in real time for any loading condition.A few well-known statistical performance indices(SPI)are considered for validation and robustness of the training and testing procedure of the developed FKM-GMDH and FKM-LSTM models based on the prediction of PSS parameters.The performance of the ML models is also evaluated using three stability indices(i.e.,minimum damping ratio,eigenvalues,and time-domain simulations)after optimally tuned PSS with real-time estimated parameters under changing operating conditions.Besides,the outputs of the offline(GWO-based)metaheuristic model,proposed real-time(FKM-GMDH and FKM-LSTM)machine learning models,and previously reported literature models are compared.According to the results,the proposed methodology outperforms the others in enhancing the stability of the selected EPS networks by damping out the observed unwanted LFOs under various loading conditions.
文摘针对目前城市道路场景中行道树提取方法需要设置的参数较多以及树冠点云相互重叠难以精确分割的问题,文章采用一种行道树提取与单株木分割算法。首先通过布料滤波算法从原始点云中移除地面点,并利用半径滤波滤除离群点,去除地面点和噪声点对行道树提取的影响;然后通过增加PointNet++网络的点集抽象模块(set abstraction,SA)提高模型特征提取能力,使模型更适用于行道树点云的提取,并利用改进后的网络从原始点云中提取行道树点云;最后结合密度聚类算法(density-based spatial clustering of applications with noise,DBSCAN)与K-Means算法对相互重叠的行道树点云进行分割,得到单株木信息。为验证该方法的有效性,以北京永昌路道路数据集进行训练测试。结果表明:改进后模型的行道树点云平均提取精度和交并比(intersection over union,IoU)分别提高了9.2%和15.1%,达到了94.5%、0.916;单木分割平均精度达到了91.3%。
