The complex vibration directly affects the dynamic safety of drill string in ultra-deep wells and extra-deep wells.It is important to understand the dynamic characteristics of drill string to ensure the safety of dril...The complex vibration directly affects the dynamic safety of drill string in ultra-deep wells and extra-deep wells.It is important to understand the dynamic characteristics of drill string to ensure the safety of drill string.Due to the super slenderness ratio of drill string,strong nonlinearity implied in dynamic analysis and the complex load environment,dynamic simulation of drill string faces great challenges.At present,many simulation methods have been developed to analyze drill string dynamics,and node iteration method is one of them.The node iteration method has a unique advantage in dealing with the contact characteristics between drill string and borehole wall,but its drawback is that the calculation consumes a considerable amount of time.This paper presents a dynamic simulation method of drilling string in extra-deep well based on successive over-relaxation node iterative method(SOR node iteration method).Through theoretical analysis and numerical examples,the correctness and validity of this method were verified,and the dynamics characteristics of drill string in extra-deep wells were calculated and analyzed.The results demonstrate that,in contrast to the conventional node iteration method,the SOR node iteration method can increase the computational efficiency by 48.2%while achieving comparable results.And the whirl trajectory of the extra-deep well drill string is extremely complicated,the maximum rotational speed downhole is approximately twice the rotational speed on the ground.The dynamic torque increases rapidly at the position of the bottom stabilizer,and the lateral vibration in the middle and lower parts of drill string is relatively intense.展开更多
Kellogg gave a version of the Peaceman-Radford method. In this paper, we introduce a SSOR iteration method which uses Kellogg’s method. The new algorithm has some advantages over the traditional SSOR algorithm. A Cyc...Kellogg gave a version of the Peaceman-Radford method. In this paper, we introduce a SSOR iteration method which uses Kellogg’s method. The new algorithm has some advantages over the traditional SSOR algorithm. A Cyclic Reduction algorithm is introduced via a decoupling in Kellogg’s method.展开更多
For a specific combustion problem involving calculations of several species at the equilibrium state, it is simpler to write a general computer program and calculate the combustion concentration. Original work describ...For a specific combustion problem involving calculations of several species at the equilibrium state, it is simpler to write a general computer program and calculate the combustion concentration. Original work describes, an adaptation of Newton-Raphson method was used for solving the highly nonlinear system of equations describing the formation of equilibrium products in reacting of fuel-additive-air mixtures. This study also shows what possible of the results. In this paper, to be present the efficient numerical algorithms for. solving the combustion problem, to be used nonlinear equations based on the iteration method and high order of the Taylor series. The modified Adomian decomposition method was applied to construct the numerical algorithms. Some numerical illustrations are given to show the efficiency of algorithms. Comparisons of results by the new Matlab routines and previous routines, the result data indicate that the new Matlab routines are reliable, typical deviations from previous results are less than 0.05%.展开更多
One of the advantages of the variational iteration method is the free choice of initial guess. In this paper we use the basic idea of the Jacobian-function method to construct a generalized trial function with some un...One of the advantages of the variational iteration method is the free choice of initial guess. In this paper we use the basic idea of the Jacobian-function method to construct a generalized trial function with some unknown parameters. The Jaulent-Miodek equations are used to illustrate effectiveness and convenience of this method, some new explicit exact travelling wave solutions have been obtained, which include bell-type soliton solution, kink-type soliton solutions, solitary wave solutions, and doubly periodic wave solutions.展开更多
For over half a century,numerical integration methods based on finite difference,such as the Runge-Kutta method and the Euler method,have been popular and widely used for solving orbit dynamic problems.In general,a sm...For over half a century,numerical integration methods based on finite difference,such as the Runge-Kutta method and the Euler method,have been popular and widely used for solving orbit dynamic problems.In general,a small integration step size is always required to suppress the increase of the accumulated computation error,which leads to a relatively slow computation speed.Recently,a collocation iteration method,approximating the solutions of orbit dynamic problems iteratively,has been developed.This method achieves high computation accuracy with extremely large step size.Although efficient,the collocation iteration method suffers from two limitations:(A)the computational error limit of the approximate solution is not clear;(B)extensive trials and errors are always required in tuning parameters.To overcome these problems,the influence mechanism of how the dynamic problems and parameters affect the error limit of the collocation iteration method is explored.On this basis,a parameter adjustment method known as the“polishing method”is proposed to improve the computation speed.The method proposed is demonstrated in three typical orbit dynamic problems in aerospace engineering:a low Earth orbit propagation problem,a Molniya orbit propagation problem,and a geostationary orbit propagation problem.Numerical simulations show that the proposed polishing method is faster and more accurate than the finite-difference-based method and the most advanced collocation iteration method.展开更多
The dynamic differential equation of a multibody System can be presented inthe form of Aq= B. Calculating the inverse of matrix A is a simple way to solve this kindof differential equatbo. Matrix A will be in the ill ...The dynamic differential equation of a multibody System can be presented inthe form of Aq= B. Calculating the inverse of matrix A is a simple way to solve this kindof differential equatbo. Matrix A will be in the ill condition if the system is configured asa main they with small mass appendages. A hierarchical iteration method is given in thispaper to avoid the problem of the inverse of an ill condition matrix calculatbo. It is pont-ed out that the stability of the system input and output is the suffcient condition of itera-tion convergence. The method omits a series formula expanding step. It is also useful toreduce the immuence of the stiff problem. The calculation progress i8 modular and structural.展开更多
The non-relativistic radial Schr¨odinger equation is analytically solved using asymptotic iteration method within the framework of a general interaction potential whose special cases are the Cornell and Cornell p...The non-relativistic radial Schr¨odinger equation is analytically solved using asymptotic iteration method within the framework of a general interaction potential whose special cases are the Cornell and Cornell plus harmonic potentials. The energy eigenvalues expression is derived in three dimensional space, which is further used to calculate the mass spectra of ˉcc,ˉbb,ˉbc, cˉs, bˉs and b ˉq mesons. The obtained results of this work are in good agreement with experimental and other relativistic results and also improved in comparison with other non-relativistic recent studies.展开更多
A new algorithm called homotopy iteration method based on the homotopy function is studied and improved. By the improved homotopy iteration method, Polynomial systems with high Order and deficient can be solved fast a...A new algorithm called homotopy iteration method based on the homotopy function is studied and improved. By the improved homotopy iteration method, Polynomial systems with high Order and deficient can be solved fast and efficiently comparing to the original homotopy iteration method. Numerical examples for the ninepoint path synthesis of four-bar linkages show the advantages and efficiency of the improved homotopy iteration method.展开更多
In this paper we develop two multilevel iteration methods for solving linear systems resulting from the Galerkin method and Tikhonov regularization for linear ill-posed problems. The two algorithms and their convergen...In this paper we develop two multilevel iteration methods for solving linear systems resulting from the Galerkin method and Tikhonov regularization for linear ill-posed problems. The two algorithms and their convergence analyses are presented in an abstract framework.展开更多
The relativistic Duffin-Kemmer-Petiau equation in the presence of Hulthen potential in （1 ＋2） dimensions for spin-one particles is studied. Hence, the asymptotic iteration method is used for obtaining energy eigenv...The relativistic Duffin-Kemmer-Petiau equation in the presence of Hulthen potential in （1 ＋2） dimensions for spin-one particles is studied. Hence, the asymptotic iteration method is used for obtaining energy eigenvalues and eigenfunctions.展开更多
The Time Fractional Burger equation was solved in this study using the Mabel software and the Variational Iteration approach. where a number of instances of the Time Fractional Burger Equation were handled using this ...The Time Fractional Burger equation was solved in this study using the Mabel software and the Variational Iteration approach. where a number of instances of the Time Fractional Burger Equation were handled using this technique. Tables and images were used to present the collected numerical results. The difference between the exact and numerical solutions demonstrates the effectiveness of the Mabel program’s solution, as well as the accuracy and closeness of the results this method produced. It also demonstrates the Mabel program’s ability to quickly and effectively produce the numerical solution.展开更多
Using the asymptotic iteration method, we obtain the S-wave solution for a short-range three-parameter central potential with 1/r singularity and with a non-orbital barrier. To the best of our knowledge, this is the f...Using the asymptotic iteration method, we obtain the S-wave solution for a short-range three-parameter central potential with 1/r singularity and with a non-orbital barrier. To the best of our knowledge, this is the first attempt at calculating the energy spectrum for this potential, which was introduced by H. Bahlouli and A. D. Alhaidari and for which they obtained the “potential parameter spectrum”. Our results are also independently verified using a direct method of diagonalizing the Hamiltonian matrix in the J-matrix basis.展开更多
The influence of oil film inertia on piston skirt lubrication in a high speedengine is investigated by an iteration method that alternately solves the Navier-Stocks equationsand the Reynolds equa-tion by finite elemen...The influence of oil film inertia on piston skirt lubrication in a high speedengine is investigated by an iteration method that alternately solves the Navier-Stocks equationsand the Reynolds equa-tion by finite element method and difference method. The Reynolds lubricationequation including oil film inertia is developed, in which the inertia coefficient is introduced toinvestigate the effect of oil film inertia. The iteration procedure and finite formulation ofsolving the new Reynolds lubrication equation are given to analyze the effect of oil film on pistonskirt in this kind of engine. The calculation results show that the oil film inertia has someeffects on the friction force, pressure force and load capacity of oil film and its effect isobvious for the last. The Reynolds lubrication equation proposed can be also used to analyze thelubrication performance of the piston skirt in low or medium speed engine and some other lubricationproblems generally excluding oil film inertia with the inertia coefficient being set at zero.展开更多
The asymptotic iteration method （AIM） is used to obtain the quasi-exact solutions of the Schr6dinger equation with a deformed well potential. For arbitrary potential parameters, a numerical aspect of AIM is also app...The asymptotic iteration method （AIM） is used to obtain the quasi-exact solutions of the Schr6dinger equation with a deformed well potential. For arbitrary potential parameters, a numerical aspect of AIM is also applied to obtain highly accurate energy eigenvalues. Additionally, the perturbation expansion, based on the AIM approach, is utilized to obtain simple analytic expressions for the energy eigenvalues.展开更多
This paper applies the variational iteration method to obtain approximate analytic solutions of compressible Euler equations in gas dynamics. This method is based on the use of Lagrange multiplier for identification o...This paper applies the variational iteration method to obtain approximate analytic solutions of compressible Euler equations in gas dynamics. This method is based on the use of Lagrange multiplier for identification of optimal values of parameters in a functional. Using this method, a rapid convergent sequence is produced which converges to the exact solutions of the problem. Numerical results and comparison with other two numerical solutions verify that this method is very convenient and efficient.展开更多
The variational iteration method is successfully extended to the case of solving fractional differential equations, and the Lagrange multiplier of the method is identified in a more accurate way. Some diffusion models...The variational iteration method is successfully extended to the case of solving fractional differential equations, and the Lagrange multiplier of the method is identified in a more accurate way. Some diffusion models with fractional derivatives are investigated analytically, and the results show the efficiency of the new Lagrange multiplier for fractional differential equations of arbitrary order.展开更多
Air exploratory discussion of an ancient Chinese algorithm, the Ying Buzu Shu, in about 2nd century BC, known as the rule of double false position in the West is given. In addition to pointing out that the rule of dou...Air exploratory discussion of an ancient Chinese algorithm, the Ying Buzu Shu, in about 2nd century BC, known as the rule of double false position in the West is given. In addition to pointing out that the rule of double false position is actually a translation version of the ancient Chinese algorithm, a comparison with well-known Newton iteration method is also made. If derivative is introduced, the ancient Chinese algorithm reduces to the Newton method. A modification of the ancient Chinese algorithm is also proposed, and some of applications to nonlinear oscillators are illustrated.展开更多
This paper studies a delayed air-sea coupled oscillator describing the physical mechanism of El Nino Southern Oscillation. The approximate expansions of the delayed differential equation＇s solution are obtained succe...This paper studies a delayed air-sea coupled oscillator describing the physical mechanism of El Nino Southern Oscillation. The approximate expansions of the delayed differential equation＇s solution are obtained successfully by the modified variational iteration method. The numerical results illustrate the effectiveness and correctness of the method by comparing with the exact solution of the reduced model.展开更多
The bound-state solution of the position dependent mass Klein-Gordon equation including inversely linear potential is obtained within the framework of the asymptotic iteration method. The relation between the scalar a...The bound-state solution of the position dependent mass Klein-Gordon equation including inversely linear potential is obtained within the framework of the asymptotic iteration method. The relation between the scalar and vector potentials is considered to S（x） = V（x）（β - 1）. In particular, it is shown that the corresponding method exactly reproduces the spectrum of linearly inversely potentials with spatially dependent mass.展开更多
The purpose is to accurately predict the performance of foil bearing and achieve accurate results in the design of foil bearing structure.A new type of foil bearing with surface microstructure is used as experimental ...The purpose is to accurately predict the performance of foil bearing and achieve accurate results in the design of foil bearing structure.A new type of foil bearing with surface microstructure is used as experimental material.First,the lubrication mechanism of elastic foil gas bearing is analyzed.Then,the numerical solution process of the static bearing capacity and friction torque is analyzed,including the discretization of the governing equation of rarefied gas pressure based on the non-dimensional modified Reynolds equation and the over relaxation iteration method,the grid planning within the calculation range,the static solution of boundary parameters and static solution of the numerical process.Finally,the solution program is analyzed.The experimental data in National Aeronautics and Space Administration(NASA)public literature are compared with the simulation results of this exploration,so as to judge the accuracy of the calculation process.The results show that under the same static load,the difference between the minimum film thickness calculated and the test results is not obvious;when the rotor speed of the bearing is 60000 r/min,the influence of the boundary slip effect increases with the increase of the micro groove depth on the flat foil surface;when the eccentricity or the micro groove depth of the bearing increases,the bearing capacity will be strengthened.When the eccentricity is 6µm and 14µm,the viscous friction torque of the new foil bearing increases significantly with the increase of the depth of the foil micro groove,but when the eccentricity is 22µm,the viscous friction torque does not change with the change of the depth of the foil micro groove.It shows that the bearing capacity and performance of foil bearing are improved.展开更多
基金supported by the National Natural Science Foundation of China(52174003,52374008).
文摘The complex vibration directly affects the dynamic safety of drill string in ultra-deep wells and extra-deep wells.It is important to understand the dynamic characteristics of drill string to ensure the safety of drill string.Due to the super slenderness ratio of drill string,strong nonlinearity implied in dynamic analysis and the complex load environment,dynamic simulation of drill string faces great challenges.At present,many simulation methods have been developed to analyze drill string dynamics,and node iteration method is one of them.The node iteration method has a unique advantage in dealing with the contact characteristics between drill string and borehole wall,but its drawback is that the calculation consumes a considerable amount of time.This paper presents a dynamic simulation method of drilling string in extra-deep well based on successive over-relaxation node iterative method(SOR node iteration method).Through theoretical analysis and numerical examples,the correctness and validity of this method were verified,and the dynamics characteristics of drill string in extra-deep wells were calculated and analyzed.The results demonstrate that,in contrast to the conventional node iteration method,the SOR node iteration method can increase the computational efficiency by 48.2%while achieving comparable results.And the whirl trajectory of the extra-deep well drill string is extremely complicated,the maximum rotational speed downhole is approximately twice the rotational speed on the ground.The dynamic torque increases rapidly at the position of the bottom stabilizer,and the lateral vibration in the middle and lower parts of drill string is relatively intense.
文摘Kellogg gave a version of the Peaceman-Radford method. In this paper, we introduce a SSOR iteration method which uses Kellogg’s method. The new algorithm has some advantages over the traditional SSOR algorithm. A Cyclic Reduction algorithm is introduced via a decoupling in Kellogg’s method.
文摘For a specific combustion problem involving calculations of several species at the equilibrium state, it is simpler to write a general computer program and calculate the combustion concentration. Original work describes, an adaptation of Newton-Raphson method was used for solving the highly nonlinear system of equations describing the formation of equilibrium products in reacting of fuel-additive-air mixtures. This study also shows what possible of the results. In this paper, to be present the efficient numerical algorithms for. solving the combustion problem, to be used nonlinear equations based on the iteration method and high order of the Taylor series. The modified Adomian decomposition method was applied to construct the numerical algorithms. Some numerical illustrations are given to show the efficiency of algorithms. Comparisons of results by the new Matlab routines and previous routines, the result data indicate that the new Matlab routines are reliable, typical deviations from previous results are less than 0.05%.
基金National Natural Science Foundation of China under Grant No.10172056
文摘One of the advantages of the variational iteration method is the free choice of initial guess. In this paper we use the basic idea of the Jacobian-function method to construct a generalized trial function with some unknown parameters. The Jaulent-Miodek equations are used to illustrate effectiveness and convenience of this method, some new explicit exact travelling wave solutions have been obtained, which include bell-type soliton solution, kink-type soliton solutions, solitary wave solutions, and doubly periodic wave solutions.
基金This study was co-supported by the National Key Research and Development Program of China(No.2021YFA0717100)the National Natural Science Foundation of China(Nos.12072270,U2013206).
文摘For over half a century,numerical integration methods based on finite difference,such as the Runge-Kutta method and the Euler method,have been popular and widely used for solving orbit dynamic problems.In general,a small integration step size is always required to suppress the increase of the accumulated computation error,which leads to a relatively slow computation speed.Recently,a collocation iteration method,approximating the solutions of orbit dynamic problems iteratively,has been developed.This method achieves high computation accuracy with extremely large step size.Although efficient,the collocation iteration method suffers from two limitations:(A)the computational error limit of the approximate solution is not clear;(B)extensive trials and errors are always required in tuning parameters.To overcome these problems,the influence mechanism of how the dynamic problems and parameters affect the error limit of the collocation iteration method is explored.On this basis,a parameter adjustment method known as the“polishing method”is proposed to improve the computation speed.The method proposed is demonstrated in three typical orbit dynamic problems in aerospace engineering:a low Earth orbit propagation problem,a Molniya orbit propagation problem,and a geostationary orbit propagation problem.Numerical simulations show that the proposed polishing method is faster and more accurate than the finite-difference-based method and the most advanced collocation iteration method.
文摘The dynamic differential equation of a multibody System can be presented inthe form of Aq= B. Calculating the inverse of matrix A is a simple way to solve this kindof differential equatbo. Matrix A will be in the ill condition if the system is configured asa main they with small mass appendages. A hierarchical iteration method is given in thispaper to avoid the problem of the inverse of an ill condition matrix calculatbo. It is pont-ed out that the stability of the system input and output is the suffcient condition of itera-tion convergence. The method omits a series formula expanding step. It is also useful toreduce the immuence of the stiff problem. The calculation progress i8 modular and structural.
基金financial support through the UGC-BSR fellowship
文摘The non-relativistic radial Schr¨odinger equation is analytically solved using asymptotic iteration method within the framework of a general interaction potential whose special cases are the Cornell and Cornell plus harmonic potentials. The energy eigenvalues expression is derived in three dimensional space, which is further used to calculate the mass spectra of ˉcc,ˉbb,ˉbc, cˉs, bˉs and b ˉq mesons. The obtained results of this work are in good agreement with experimental and other relativistic results and also improved in comparison with other non-relativistic recent studies.
文摘A new algorithm called homotopy iteration method based on the homotopy function is studied and improved. By the improved homotopy iteration method, Polynomial systems with high Order and deficient can be solved fast and efficiently comparing to the original homotopy iteration method. Numerical examples for the ninepoint path synthesis of four-bar linkages show the advantages and efficiency of the improved homotopy iteration method.
基金The NSF(0611005)of Jiangxi Province and the SF(2007293)of Jiangxi Provincial Education Department.
文摘In this paper we develop two multilevel iteration methods for solving linear systems resulting from the Galerkin method and Tikhonov regularization for linear ill-posed problems. The two algorithms and their convergence analyses are presented in an abstract framework.
文摘The relativistic Duffin-Kemmer-Petiau equation in the presence of Hulthen potential in （1 ＋2） dimensions for spin-one particles is studied. Hence, the asymptotic iteration method is used for obtaining energy eigenvalues and eigenfunctions.
文摘The Time Fractional Burger equation was solved in this study using the Mabel software and the Variational Iteration approach. where a number of instances of the Time Fractional Burger Equation were handled using this technique. Tables and images were used to present the collected numerical results. The difference between the exact and numerical solutions demonstrates the effectiveness of the Mabel program’s solution, as well as the accuracy and closeness of the results this method produced. It also demonstrates the Mabel program’s ability to quickly and effectively produce the numerical solution.
文摘Using the asymptotic iteration method, we obtain the S-wave solution for a short-range three-parameter central potential with 1/r singularity and with a non-orbital barrier. To the best of our knowledge, this is the first attempt at calculating the energy spectrum for this potential, which was introduced by H. Bahlouli and A. D. Alhaidari and for which they obtained the “potential parameter spectrum”. Our results are also independently verified using a direct method of diagonalizing the Hamiltonian matrix in the J-matrix basis.
文摘The influence of oil film inertia on piston skirt lubrication in a high speedengine is investigated by an iteration method that alternately solves the Navier-Stocks equationsand the Reynolds equa-tion by finite element method and difference method. The Reynolds lubricationequation including oil film inertia is developed, in which the inertia coefficient is introduced toinvestigate the effect of oil film inertia. The iteration procedure and finite formulation ofsolving the new Reynolds lubrication equation are given to analyze the effect of oil film on pistonskirt in this kind of engine. The calculation results show that the oil film inertia has someeffects on the friction force, pressure force and load capacity of oil film and its effect isobvious for the last. The Reynolds lubrication equation proposed can be also used to analyze thelubrication performance of the piston skirt in low or medium speed engine and some other lubricationproblems generally excluding oil film inertia with the inertia coefficient being set at zero.
文摘The asymptotic iteration method （AIM） is used to obtain the quasi-exact solutions of the Schr6dinger equation with a deformed well potential. For arbitrary potential parameters, a numerical aspect of AIM is also applied to obtain highly accurate energy eigenvalues. Additionally, the perturbation expansion, based on the AIM approach, is utilized to obtain simple analytic expressions for the energy eigenvalues.
基金supported by the National Natural Science Foundation of China (Grant Nos. 10771019 and 10826107)
文摘This paper applies the variational iteration method to obtain approximate analytic solutions of compressible Euler equations in gas dynamics. This method is based on the use of Lagrange multiplier for identification of optimal values of parameters in a functional. Using this method, a rapid convergent sequence is produced which converges to the exact solutions of the problem. Numerical results and comparison with other two numerical solutions verify that this method is very convenient and efficient.
基金Project supported by the Key Program of the National Natural Science Foundation of China （Grant No. 51134018）.
文摘The variational iteration method is successfully extended to the case of solving fractional differential equations, and the Lagrange multiplier of the method is identified in a more accurate way. Some diffusion models with fractional derivatives are investigated analytically, and the results show the efficiency of the new Lagrange multiplier for fractional differential equations of arbitrary order.
文摘Air exploratory discussion of an ancient Chinese algorithm, the Ying Buzu Shu, in about 2nd century BC, known as the rule of double false position in the West is given. In addition to pointing out that the rule of double false position is actually a translation version of the ancient Chinese algorithm, a comparison with well-known Newton iteration method is also made. If derivative is introduced, the ancient Chinese algorithm reduces to the Newton method. A modification of the ancient Chinese algorithm is also proposed, and some of applications to nonlinear oscillators are illustrated.
基金supported by the National Natural Science Foundation of China (Grant Nos.41105063 and 61070041)
文摘This paper studies a delayed air-sea coupled oscillator describing the physical mechanism of El Nino Southern Oscillation. The approximate expansions of the delayed differential equation＇s solution are obtained successfully by the modified variational iteration method. The numerical results illustrate the effectiveness and correctness of the method by comparing with the exact solution of the reduced model.
基金supported by the Research Fund of Gaziantep University and the Scientific and Technological Research Council of Turkey (TUBITAK).
文摘The bound-state solution of the position dependent mass Klein-Gordon equation including inversely linear potential is obtained within the framework of the asymptotic iteration method. The relation between the scalar and vector potentials is considered to S（x） = V（x）（β - 1）. In particular, it is shown that the corresponding method exactly reproduces the spectrum of linearly inversely potentials with spatially dependent mass.
文摘The purpose is to accurately predict the performance of foil bearing and achieve accurate results in the design of foil bearing structure.A new type of foil bearing with surface microstructure is used as experimental material.First,the lubrication mechanism of elastic foil gas bearing is analyzed.Then,the numerical solution process of the static bearing capacity and friction torque is analyzed,including the discretization of the governing equation of rarefied gas pressure based on the non-dimensional modified Reynolds equation and the over relaxation iteration method,the grid planning within the calculation range,the static solution of boundary parameters and static solution of the numerical process.Finally,the solution program is analyzed.The experimental data in National Aeronautics and Space Administration(NASA)public literature are compared with the simulation results of this exploration,so as to judge the accuracy of the calculation process.The results show that under the same static load,the difference between the minimum film thickness calculated and the test results is not obvious;when the rotor speed of the bearing is 60000 r/min,the influence of the boundary slip effect increases with the increase of the micro groove depth on the flat foil surface;when the eccentricity or the micro groove depth of the bearing increases,the bearing capacity will be strengthened.When the eccentricity is 6µm and 14µm,the viscous friction torque of the new foil bearing increases significantly with the increase of the depth of the foil micro groove,but when the eccentricity is 22µm,the viscous friction torque does not change with the change of the depth of the foil micro groove.It shows that the bearing capacity and performance of foil bearing are improved.
