The most critical obstacle for four-wheel independently driven electric vehicles(4WID-EVs)is the driving range.Being the actuators of 4WID-EVs,motors account for its major power consumption.In this sense,by properly d...The most critical obstacle for four-wheel independently driven electric vehicles(4WID-EVs)is the driving range.Being the actuators of 4WID-EVs,motors account for its major power consumption.In this sense,by properly distributing torques to minimize the power consumption,the driving range of 4WID-EV can be effectively improved.This paper proposes a model predictive control(MPC)-based torque distribution scheme,which minimizes the power consumption of 4WID-EVs while guaranteeing its tracking performance of planar motions.By incorporating the motor model considering iron losses,the optimal torque distribution can be achieved without an additional torque controller.Also,for this reason,the proposed control scheme is computationally efficient,since the power consumption term to be optimized,which is expressed as the product of the motor voltages and currents,is much simpler than that derived from the efficiency map.With reasonable simplification and linearization,the MPC problem is converted to a quadratic programming problem,which can be solved efficiently.The simulation results in MATLAB and CarSim co-simulation environments demonstrate that the proposed scheme effectively reduces power consumption with guaranteed tracking performance.展开更多
The effect of ball scribing on iron loss of conventional grain-oriented ( CGO) and high-permeability grain-oriented ( HGO) electrical steel was investigated. In this paper,ball scribing was achieved by self- designed ...The effect of ball scribing on iron loss of conventional grain-oriented ( CGO) and high-permeability grain-oriented ( HGO) electrical steel was investigated. In this paper,ball scribing was achieved by self- designed ball scribing instrument and a computer-controlled system capable of providing high accuracy and automatic measurements was developed for the magnetisation and measurement at high and low flux densities. The results showed that after ball scribing,iron loss of two types of steel ( C711 and H668 ) apparently decreases ( 5. 5% and 8. 2% respectively after 16mm scribing at 1. 2T) ,and at high and low flux densities, CGO and HGO electrical steel performs differently. Through the formation and development of free magnetic poles and secondary magnetic domains due to compressive stress,primary magnetic domain spacing of grain- oriented electrical steel becomes smaller,which reflects as a reduction of iron loss in the macroscopic magnetic properties. Through iron loss formula derivation,the effect of domain refinement on grain-oriented electrical steel was also interpreted.展开更多
In order to better realize the energy recovery and storage of hybrid EVs(HEVs),a switched reluctance starter/generator(SRS/G)with both starting and power generation functions is investigated in this paper.First,the ir...In order to better realize the energy recovery and storage of hybrid EVs(HEVs),a switched reluctance starter/generator(SRS/G)with both starting and power generation functions is investigated in this paper.First,the iron loss of SRS/G is mainly studied to reduce the motor loss and improve the power generation efficiency.Then,the energy storage of hybrid EVs can be effectively improved.Secondly,a magnetic flux density(MFD)waveforms solution method is proposed to solve the difficulty in calculating the iron loss of the SRS/G.Compared with the commonly used finite element method,the proposed solution method has the advantages of simple,fast and small computational amount.Meanwhile,considering the different operating conditions of SRS/G,the iron loss models for both the time-domain and frequency-domain are established.In addition,the calculation formula of the variable coefficient Bertotti three-term loss separation is improved.As the hysteresis loss coefficient,the Steinmetz coefficient and the stray loss coefficient are respectively fitted by the Fourier fitting method.This method is also applied to solve the iron loss of SRS/G.Finally,through an experimental verification,it is indicated that the development of proposed method has high accuracy.展开更多
The common analytical models for the no-load iron loss of permanent magnet(PM)motors usually neglect the iron loss caused by the rotating magnetic field in the tooth tips and the harmonics of the magnetic fields in th...The common analytical models for the no-load iron loss of permanent magnet(PM)motors usually neglect the iron loss caused by the rotating magnetic field in the tooth tips and the harmonics of the magnetic fields in the teeth and yokes.This paper presents an analytical model for no-load iron loss of a fractional-slot surface-mounted permanent magnet motor.According to the existing analytical model of the magnetic field distribution in the slotted air gap,the magnetic flux densities considering the harmonics of the stator tooth and yoke are both derived based on the continuity of magnetic flux.Due to the complexity of the magnetic field in the tooth tip,the tangential flux density of the tooth tip is approximated by an equivalent sine wave and the radial component is regarded to be the same as that of the corresponding tooth.After obtaining the magnetic fields in stator different regions,the analytical iron loss is calculated by using the Bertotti model and the orthogonal decomposition model.A 20-pole/24-slot PM synchronous motor is taken as an example.The maximum error between the analytical model and finite element model(FEM)is 5.46%,which verifies the validity of the proposed method.展开更多
Mass loss and direct reduction characteristics of iron ore-coal composite pellets under different technological parameters were investigated. Meanwhile, changes of iron phase at different temperatures were analyzed by...Mass loss and direct reduction characteristics of iron ore-coal composite pellets under different technological parameters were investigated. Meanwhile, changes of iron phase at different temperatures were analyzed by using X-ray diffraction （XRD）, and characteristics of crushed products were studied by using a scanning electron microscope （SEM）. The results showed that heating rate had little influence on the reduction, but the temperature played an important role in the reduction process. The mass loss rate increased rapidly from 800 to 1 100 ℃. The reduction process can be divided into three steps which correspond to different temperature ranges. Fe2 03 began to transform into Fe304 below 500 ℃, and FeO was reduced into Fe from 900 ℃. At 900 ℃, the reduction product showed a clear porous structure, which promoted the reduction progress. At 1000 ℃, the metallic Fe dominated the sample, and the reduction reached a very high degree.展开更多
This study aims to consolidate the surface of gray cast iron with aluminum deposition by developing a method that combines the preparation and surface treatment in a single operation. The effect of the wall thickness ...This study aims to consolidate the surface of gray cast iron with aluminum deposition by developing a method that combines the preparation and surface treatment in a single operation. The effect of the wall thickness of the castings on the microstructure of the formed layers was studied, and two thicknesses, 8 mm and 25 mm, were studied. The formation of a continuous and homogeneous rich aluminum layer on the surface of the cast iron was observed. The formed layer is composed of two successive zones identified as two proeutectoid phases FeAl+FeAl/FeAl2 and single-phase FeAl, which significantly increases the surface hardness. Furthermore, this change in surface composition makes it possible to reduce the mass of the immersed samples in a 1 M hydrochloric acid solution during different exposure times(1 to 4 days). Consequently, a clear improvement in the corrosion resistance of the treated layers is highlighted.展开更多
Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have th...Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have the benefits of high power density,high efficiency and wide speed range.Which causes the calculation for iron loss and copper loss in whole operating range complex.By analyzing the components and influencing factors of iron loss and copper loss in stator,we have deduced the calculation formula of iron loss and copper loss in whole operating range based on the analytical solution and finite element approach(EFA)solution.According to the calculation solution,taking the influence of operating temperature on the iron loss and copper loss into account,we propose a temperature correction factor and establish the calculation method for the iron loss and copper loss with temperature influences.Finally,by the conductor transposition,we restrain the circulating current under high-frequency operating condition.展开更多
The electromagnetic （EM） wave absorbing property of silicone rubber filled with carbonyl iron particles （CIPs） and multi-walled carbon nanotubes （MWCNTs） was examined. Absorbents including MWCNTs and spherical/ ...The electromagnetic （EM） wave absorbing property of silicone rubber filled with carbonyl iron particles （CIPs） and multi-walled carbon nanotubes （MWCNTs） was examined. Absorbents including MWCNTs and spherical/ flaky CIPs were added to silicone rubber using a two-roll mixer. The complex permittivity and complex permeability were measured over the frequency range of 1-18 GHz. The two EM parameters were verified and the uniform dispersion of MWCNTs and ClPs was confirmed by comparing the measured reflection loss （RL） with the calculated one. As the MWCNT weight percent increased, the RL of the spherical CIPs/silicone rubber composites changed insignificantly. It was attributed to the random distribution of spherical ClPs and less content of MWCNTs. On the contrary, for composites filled with flaky ClPs the absorption bandwidth increased at thickness 0.5 mm （RL value lower than -5 dB in 8-18 GHz） and the absorption ratio increased at lower frequency （minimum -35 dB at 3.5 GHz）. This effect was attributed to the oriented distribution of flaky CIPs caused by interactions between the two absorbents. Therefore, mixing MWCNTs and flaky CIPs could achieve wider-band and higher-absorption ratio absorbing materials.展开更多
AIM: To determine whether patients hospitalized with gastrointestinal(GI) blood loss anemia are being checked and treated for iron deficiency. METHODS: Retrospective chart review was conducted for all patients admitte...AIM: To determine whether patients hospitalized with gastrointestinal(GI) blood loss anemia are being checked and treated for iron deficiency. METHODS: Retrospective chart review was conducted for all patients admitted to a single tertiary care hospital between 11/1/2011 and 1/31/2012 for any type of GI bleeding. The primary endpoint was the percentage of patients who had their iron studies checked during a hospitalization for GI blood loss anemia. Secondary outcomes included percentage of anemic GI bleeders who had adequate documentation of anemia and iron deficiency, and those who were treated for their iron deficiency. Then we tried to identify possible predictors of checking iron studies in an attempt to understand the thought process that physicians go through when managing these patients. Iron deficiency was defined as Iron saturation less than 15% or ferritin level less than 45 μg/L. Anemia was defined as hemoglobin level less than 13 g/dL for males and 12 g/dL for females.RESULTS: Three hundred and seven GI bleeders were hospitalized during the study period, and 282 of those(91.9%) had anemia during their hospital stay. Ninetyfive patients(30.9%) had iron studies performed during hospitalization, and 45 of those(47.4%) were actually found to be iron deficient. Only 29 of those 45 iron deficient patients were discharged home on iron supplements. Of the 282 patients that had anemia during hospitalization, 50(17.7%) had no documentation of the anemia in their hospital chart. Of the 45 patients that had lab proven iron deficiency anemia(IDA), only 22(48.5%) had documentation of IDA in at least one note in their chart. Predictors of checking iron studies in anemic GI bleeders were lower mean corpuscular volume, documentation of anemia, having fecal occult blood testing, not having hematemesis or past history of GI bleeding. There were no significant differences between the teaching and non-teaching services in any patient characteristics or outcomes. CONCLUSION: Iron deficiency is under-diagnosed, under-recognized even when iron studies were checked, and under-treated in hospitalized patients with GI bleeding.展开更多
A series of austenitic cast iron samples with different compositions were cast and a part of nickel in the samples was replaced by manganese for economic reason. Erosion–corrosion tests were conducted under 2wt% sulf...A series of austenitic cast iron samples with different compositions were cast and a part of nickel in the samples was replaced by manganese for economic reason. Erosion–corrosion tests were conducted under 2wt% sulfuric acid and 15wt% quartz sand. The results show that the matrix of cast irons remains austenite after a portion of nickel is replaced with manganese.（Fe,Cr）3C is a common phase in the cast irons, and nickel is the main alloying element in high-nickel cast iron; whereas,（Fe,Mn）3C is observed with the increased manganese content in low-nickel cast iron. Under erosion–corrosion tests, the weight-loss rates of the cast irons increase with increasing time. Wear plays a more important role than corrosion in determining the weight loss. It is indicated that the processes of weight loss for the cast irons with high and low nickel contents are different. The erosion resistance of the cast iron containing 7.29wt% nickel and 6.94wt% manganese is equivalent to that of the cast iron containing 13.29wt% nickel.展开更多
Using auditory electrophysiological,histopathological,enzymehistochemical and scanning electron microscopic techniques,we observed thechanges of function and structure of cochlea in iron-deficient growing rats receiv-...Using auditory electrophysiological,histopathological,enzymehistochemical and scanning electron microscopic techniques,we observed thechanges of function and structure of cochlea in iron-deficient growing rats receiv-ing kanamycin intramuscularly.The results showed that at an equal dose ofkanamycin,hearing loss and hair cell damage were more serious,and incidence ofhearing loss was much higher in iron-deficient rats than in normal rats.Theinhibition of succinate dehydrogenase activity of cochlea induced by interaction ofkanamycin and iron deficiency was more obvious than that by either one of them.Iron deficiency can increase the sensitivity of cochlea to kanamycin.The resultsindicated that iron deficiency may be one of the reasons for high incidence ofototoxic deafness in children,and it should be cautious when using such drugs inchildren with iron-deficient anemia.展开更多
This paper proposes that fortifying honored traditional recipes with natural foods in tandem with preventing food loss and waste adds a new dimension to sustainable food management—nutrient recovery and bioavailabil...This paper proposes that fortifying honored traditional recipes with natural foods in tandem with preventing food loss and waste adds a new dimension to sustainable food management—nutrient recovery and bioavailability—while reducing the global prevalence of anemia and other diet-induced maladies. Using the complementarity of iron and Vitamin C as an example, this paper demonstrates that we can recover bioavailable nutrients to ensure recovery is efficient. The authors show by example that returning food loss and waste into a healthy food environment can meet the daily and monthly needs of iron-deficiency in substantial portions of the populations with significant need and in all countries. Further, maximizing the availability of key nutrients, like iron, will reduce the stress of animal husbandry on the environment, reduce greenhouse gas emissions;and thereby, reduce agriculture impacts to climate change and global warming. Considering the quality, quantity, and convenience of food recovery, from farm—and beyond fork—to gut, is key for global policy development in nutrition public health and actions that are ready to implement today.展开更多
基金supported in part by National Natural Science Foundation of China(NSFC)under Project No.51737010.
文摘The most critical obstacle for four-wheel independently driven electric vehicles(4WID-EVs)is the driving range.Being the actuators of 4WID-EVs,motors account for its major power consumption.In this sense,by properly distributing torques to minimize the power consumption,the driving range of 4WID-EV can be effectively improved.This paper proposes a model predictive control(MPC)-based torque distribution scheme,which minimizes the power consumption of 4WID-EVs while guaranteeing its tracking performance of planar motions.By incorporating the motor model considering iron losses,the optimal torque distribution can be achieved without an additional torque controller.Also,for this reason,the proposed control scheme is computationally efficient,since the power consumption term to be optimized,which is expressed as the product of the motor voltages and currents,is much simpler than that derived from the efficiency map.With reasonable simplification and linearization,the MPC problem is converted to a quadratic programming problem,which can be solved efficiently.The simulation results in MATLAB and CarSim co-simulation environments demonstrate that the proposed scheme effectively reduces power consumption with guaranteed tracking performance.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 51174057 and 51274062)National High Technology Research and Development Program (Grant No. 2012AA03A503)
文摘The effect of ball scribing on iron loss of conventional grain-oriented ( CGO) and high-permeability grain-oriented ( HGO) electrical steel was investigated. In this paper,ball scribing was achieved by self- designed ball scribing instrument and a computer-controlled system capable of providing high accuracy and automatic measurements was developed for the magnetisation and measurement at high and low flux densities. The results showed that after ball scribing,iron loss of two types of steel ( C711 and H668 ) apparently decreases ( 5. 5% and 8. 2% respectively after 16mm scribing at 1. 2T) ,and at high and low flux densities, CGO and HGO electrical steel performs differently. Through the formation and development of free magnetic poles and secondary magnetic domains due to compressive stress,primary magnetic domain spacing of grain- oriented electrical steel becomes smaller,which reflects as a reduction of iron loss in the macroscopic magnetic properties. Through iron loss formula derivation,the effect of domain refinement on grain-oriented electrical steel was also interpreted.
基金supported in part by the Shenzhen Collaborative Innovation Special Plan International Cooperation Research Project(No.GJHZ20220913144400001)the General Research Project of Shenzhen Science and Technology Plan(No.JCYJ20220818100000001).
文摘In order to better realize the energy recovery and storage of hybrid EVs(HEVs),a switched reluctance starter/generator(SRS/G)with both starting and power generation functions is investigated in this paper.First,the iron loss of SRS/G is mainly studied to reduce the motor loss and improve the power generation efficiency.Then,the energy storage of hybrid EVs can be effectively improved.Secondly,a magnetic flux density(MFD)waveforms solution method is proposed to solve the difficulty in calculating the iron loss of the SRS/G.Compared with the commonly used finite element method,the proposed solution method has the advantages of simple,fast and small computational amount.Meanwhile,considering the different operating conditions of SRS/G,the iron loss models for both the time-domain and frequency-domain are established.In addition,the calculation formula of the variable coefficient Bertotti three-term loss separation is improved.As the hysteresis loss coefficient,the Steinmetz coefficient and the stray loss coefficient are respectively fitted by the Fourier fitting method.This method is also applied to solve the iron loss of SRS/G.Finally,through an experimental verification,it is indicated that the development of proposed method has high accuracy.
基金Supported by the Major Science and Technology Project Servo Drive and Motor Test Specification and Standard Research and Test Platform(2012ZX04001051).
文摘The common analytical models for the no-load iron loss of permanent magnet(PM)motors usually neglect the iron loss caused by the rotating magnetic field in the tooth tips and the harmonics of the magnetic fields in the teeth and yokes.This paper presents an analytical model for no-load iron loss of a fractional-slot surface-mounted permanent magnet motor.According to the existing analytical model of the magnetic field distribution in the slotted air gap,the magnetic flux densities considering the harmonics of the stator tooth and yoke are both derived based on the continuity of magnetic flux.Due to the complexity of the magnetic field in the tooth tip,the tangential flux density of the tooth tip is approximated by an equivalent sine wave and the radial component is regarded to be the same as that of the corresponding tooth.After obtaining the magnetic fields in stator different regions,the analytical iron loss is calculated by using the Bertotti model and the orthogonal decomposition model.A 20-pole/24-slot PM synchronous motor is taken as an example.The maximum error between the analytical model and finite element model(FEM)is 5.46%,which verifies the validity of the proposed method.
基金Sponsored by Fundamental Research Funds for the Central Universities of China(FRF-SD-12-007B)National Science and Technology Support Plan in the 12th Five-year of China(2011BAE13B09)
文摘Mass loss and direct reduction characteristics of iron ore-coal composite pellets under different technological parameters were investigated. Meanwhile, changes of iron phase at different temperatures were analyzed by using X-ray diffraction （XRD）, and characteristics of crushed products were studied by using a scanning electron microscope （SEM）. The results showed that heating rate had little influence on the reduction, but the temperature played an important role in the reduction process. The mass loss rate increased rapidly from 800 to 1 100 ℃. The reduction process can be divided into three steps which correspond to different temperature ranges. Fe2 03 began to transform into Fe304 below 500 ℃, and FeO was reduced into Fe from 900 ℃. At 900 ℃, the reduction product showed a clear porous structure, which promoted the reduction progress. At 1000 ℃, the metallic Fe dominated the sample, and the reduction reached a very high degree.
文摘This study aims to consolidate the surface of gray cast iron with aluminum deposition by developing a method that combines the preparation and surface treatment in a single operation. The effect of the wall thickness of the castings on the microstructure of the formed layers was studied, and two thicknesses, 8 mm and 25 mm, were studied. The formation of a continuous and homogeneous rich aluminum layer on the surface of the cast iron was observed. The formed layer is composed of two successive zones identified as two proeutectoid phases FeAl+FeAl/FeAl2 and single-phase FeAl, which significantly increases the surface hardness. Furthermore, this change in surface composition makes it possible to reduce the mass of the immersed samples in a 1 M hydrochloric acid solution during different exposure times(1 to 4 days). Consequently, a clear improvement in the corrosion resistance of the treated layers is highlighted.
基金This work was supported by the National Natural Science Foundation of China(51677144).
文摘Iron loss and copper loss are the significant parts of electrical loss of machines,which are the major parts particularly under high frequency condition.High-speed permanent magnet synchronous machines(HS-PMSM)have the benefits of high power density,high efficiency and wide speed range.Which causes the calculation for iron loss and copper loss in whole operating range complex.By analyzing the components and influencing factors of iron loss and copper loss in stator,we have deduced the calculation formula of iron loss and copper loss in whole operating range based on the analytical solution and finite element approach(EFA)solution.According to the calculation solution,taking the influence of operating temperature on the iron loss and copper loss into account,we propose a temperature correction factor and establish the calculation method for the iron loss and copper loss with temperature influences.Finally,by the conductor transposition,we restrain the circulating current under high-frequency operating condition.
基金supported by the National Natural Science Foundation of China (Grant No. 50805005)the National "863" Project of China (Grant No. 2009AA043804)the Foundation for the Author of National Excellent Doctoral Dissertation of PR China (Grant No. 2007B32)
文摘The electromagnetic （EM） wave absorbing property of silicone rubber filled with carbonyl iron particles （CIPs） and multi-walled carbon nanotubes （MWCNTs） was examined. Absorbents including MWCNTs and spherical/ flaky CIPs were added to silicone rubber using a two-roll mixer. The complex permittivity and complex permeability were measured over the frequency range of 1-18 GHz. The two EM parameters were verified and the uniform dispersion of MWCNTs and ClPs was confirmed by comparing the measured reflection loss （RL） with the calculated one. As the MWCNT weight percent increased, the RL of the spherical CIPs/silicone rubber composites changed insignificantly. It was attributed to the random distribution of spherical ClPs and less content of MWCNTs. On the contrary, for composites filled with flaky ClPs the absorption bandwidth increased at thickness 0.5 mm （RL value lower than -5 dB in 8-18 GHz） and the absorption ratio increased at lower frequency （minimum -35 dB at 3.5 GHz）. This effect was attributed to the oriented distribution of flaky CIPs caused by interactions between the two absorbents. Therefore, mixing MWCNTs and flaky CIPs could achieve wider-band and higher-absorption ratio absorbing materials.
文摘AIM: To determine whether patients hospitalized with gastrointestinal(GI) blood loss anemia are being checked and treated for iron deficiency. METHODS: Retrospective chart review was conducted for all patients admitted to a single tertiary care hospital between 11/1/2011 and 1/31/2012 for any type of GI bleeding. The primary endpoint was the percentage of patients who had their iron studies checked during a hospitalization for GI blood loss anemia. Secondary outcomes included percentage of anemic GI bleeders who had adequate documentation of anemia and iron deficiency, and those who were treated for their iron deficiency. Then we tried to identify possible predictors of checking iron studies in an attempt to understand the thought process that physicians go through when managing these patients. Iron deficiency was defined as Iron saturation less than 15% or ferritin level less than 45 μg/L. Anemia was defined as hemoglobin level less than 13 g/dL for males and 12 g/dL for females.RESULTS: Three hundred and seven GI bleeders were hospitalized during the study period, and 282 of those(91.9%) had anemia during their hospital stay. Ninetyfive patients(30.9%) had iron studies performed during hospitalization, and 45 of those(47.4%) were actually found to be iron deficient. Only 29 of those 45 iron deficient patients were discharged home on iron supplements. Of the 282 patients that had anemia during hospitalization, 50(17.7%) had no documentation of the anemia in their hospital chart. Of the 45 patients that had lab proven iron deficiency anemia(IDA), only 22(48.5%) had documentation of IDA in at least one note in their chart. Predictors of checking iron studies in anemic GI bleeders were lower mean corpuscular volume, documentation of anemia, having fecal occult blood testing, not having hematemesis or past history of GI bleeding. There were no significant differences between the teaching and non-teaching services in any patient characteristics or outcomes. CONCLUSION: Iron deficiency is under-diagnosed, under-recognized even when iron studies were checked, and under-treated in hospitalized patients with GI bleeding.
基金financially supported by the National Nature Science Foundation of China (No. 51101109)
文摘A series of austenitic cast iron samples with different compositions were cast and a part of nickel in the samples was replaced by manganese for economic reason. Erosion–corrosion tests were conducted under 2wt% sulfuric acid and 15wt% quartz sand. The results show that the matrix of cast irons remains austenite after a portion of nickel is replaced with manganese.（Fe,Cr）3C is a common phase in the cast irons, and nickel is the main alloying element in high-nickel cast iron; whereas,（Fe,Mn）3C is observed with the increased manganese content in low-nickel cast iron. Under erosion–corrosion tests, the weight-loss rates of the cast irons increase with increasing time. Wear plays a more important role than corrosion in determining the weight loss. It is indicated that the processes of weight loss for the cast irons with high and low nickel contents are different. The erosion resistance of the cast iron containing 7.29wt% nickel and 6.94wt% manganese is equivalent to that of the cast iron containing 13.29wt% nickel.
文摘Using auditory electrophysiological,histopathological,enzymehistochemical and scanning electron microscopic techniques,we observed thechanges of function and structure of cochlea in iron-deficient growing rats receiv-ing kanamycin intramuscularly.The results showed that at an equal dose ofkanamycin,hearing loss and hair cell damage were more serious,and incidence ofhearing loss was much higher in iron-deficient rats than in normal rats.Theinhibition of succinate dehydrogenase activity of cochlea induced by interaction ofkanamycin and iron deficiency was more obvious than that by either one of them.Iron deficiency can increase the sensitivity of cochlea to kanamycin.The resultsindicated that iron deficiency may be one of the reasons for high incidence ofototoxic deafness in children,and it should be cautious when using such drugs inchildren with iron-deficient anemia.
文摘This paper proposes that fortifying honored traditional recipes with natural foods in tandem with preventing food loss and waste adds a new dimension to sustainable food management—nutrient recovery and bioavailability—while reducing the global prevalence of anemia and other diet-induced maladies. Using the complementarity of iron and Vitamin C as an example, this paper demonstrates that we can recover bioavailable nutrients to ensure recovery is efficient. The authors show by example that returning food loss and waste into a healthy food environment can meet the daily and monthly needs of iron-deficiency in substantial portions of the populations with significant need and in all countries. Further, maximizing the availability of key nutrients, like iron, will reduce the stress of animal husbandry on the environment, reduce greenhouse gas emissions;and thereby, reduce agriculture impacts to climate change and global warming. Considering the quality, quantity, and convenience of food recovery, from farm—and beyond fork—to gut, is key for global policy development in nutrition public health and actions that are ready to implement today.
