The highly-dispersed iron element decorated Ni foam was prepared by simple immersion in a ferric nitrate solution at room temperature without using acid etching, and characterized by X-ray powder diffraction(XRD), sca...The highly-dispersed iron element decorated Ni foam was prepared by simple immersion in a ferric nitrate solution at room temperature without using acid etching, and characterized by X-ray powder diffraction(XRD), scanning electron microscopy(SEM), EDAX spectrum(EDAX mapping) and Raman spectroscopy. The EDAX spectrum illustrated that iron element was highly-dispersed over the entire surface of nickel foam, and the Raman spectroscopy revealed that both Ni-O and Fe-O bonds were formed on the surface of the as-prepared electrode. Moreover, the iron element decorated Ni foam electrode can be used as non-enzymatic glucose sensor and it exhibits not only an ultra-wide linear concentration range of 1-18 mmol/L with an outstanding sensitivity of 1.0388 m A·mmol/(L·cm2), but also an excellent ability of stability and selectivity. Therefore, this work presents a simple yet effective approach to successfully modify Ni foam as non-enzymatic glucose sensor.展开更多
The effects of alloying elements on the as-cast microstructures and mechanical properties of heavy section ductile cast iron were investigated to develop press die material having high strength and high ductility. Mea...The effects of alloying elements on the as-cast microstructures and mechanical properties of heavy section ductile cast iron were investigated to develop press die material having high strength and high ductility. Measurements of ultimate tensile strength, 0.2% proof strength, elongation and unnotched Charpy impact energy are presented as a function of alloy amounts within 0.25 to 0.75 wt pct range. Hardness is measured on the broken tensile specimens. The small additions of Mo, Cu, Ni and Cr changed the as-cast mechanical properties owing to the different as-cast matrix microstructures. The ferrite matrix of Mo and Ni alloyed cast iron exhibits low strength and hardness as well as high elongation and impact energy. The increase in Mo and Ni contents developed some fractions of pearlite structures near the austenite eutectic cell boundaries, which caused the elongation and impact energy to drop in a small range. Adding Cu and Cr elements rapidly changed the ferrite matrix into pearlite matrix, so strength and hardness were significantly increased. As more Mo and Cr were added, the size and fraction of primary carbides in the eutectic cell boundaries increased through the segregation of these elements into the intercellular boundaries.展开更多
Austempered ductile iron(ADI) parts have a unique combination of high strength and toughness with excellent design flexibility and low cost. These excellent properties are directly related to its microstructure called...Austempered ductile iron(ADI) parts have a unique combination of high strength and toughness with excellent design flexibility and low cost. These excellent properties are directly related to its microstructure called "ausferrite" that is the result of austempering heat treatment applied to ductile irons. Alloying elements increase ADI austemperability and change speeds of austempering reactions. Thus, they can affect ADI resultant microstructure and mechanical properties. In this paper, the effects of alloying elements on ADI mechanical properties, microstructural changes, two-stage austempering reactions, processing windows, austemperability, and other aspects are reviewed.展开更多
Iron mineralizations in the study area are found in amphibolites in the localities of Buyukoren,Uzunkuyu-Atkayasi,and Karabacak and they display a predominantly banded texture.Their paragenesis is dominated by magneti...Iron mineralizations in the study area are found in amphibolites in the localities of Buyukoren,Uzunkuyu-Atkayasi,and Karabacak and they display a predominantly banded texture.Their paragenesis is dominated by magnetite and hematite.In this study,iron mineralizations in Sarikaya were examined in terms of rare earth element(REE) contents and attempts were made to determine some physicochemical conditions that had an impact upon their formation.For this purpose,42 ore samples and 17 enriched magnetite samples...展开更多
An apparatus of zone melting unidirectional solidification with a steep temperature gradient and an impact fatigue tester were used.The effect of RE elements on the morphology of carbides and the impact fatigue proper...An apparatus of zone melting unidirectional solidification with a steep temperature gradient and an impact fatigue tester were used.The effect of RE elements on the morphology of carbides and the impact fatigue properties of the low Cr white cast iron were investigated.Experimental results showed that the modi- fying effect of RE elements was remarkable on the M3C carbides.With the addition of RE elements in the low Cr iron,a lot of plate-like carbides were transformed into lath-like and rod-like ones.The higher the content of RE elements was,the more was the fraction of the lath-like and rod-like carbides.In the low Cr white cast iron,the RE modifying agent can efficiently increase the impact fatigue resistance and decrease the crack growth rate and delay the time of incipient cracking.With the increase of the content of RE elements in the low Cr cast iron,the impact fatigue resistance increased greatly and the crack growth rate decreased rap- idly.展开更多
The effect of trace elements with zero self-interaction coefficient on crystallization temperature of iron carbon alloys was studied and the mathematic equation was developed based on thermodynamics in the present res...The effect of trace elements with zero self-interaction coefficient on crystallization temperature of iron carbon alloys was studied and the mathematic equation was developed based on thermodynamics in the present researeh. With the equation developed in this paper, the effects of nitrogen on crystallization temperature of Fe-3.45C-2.15Si0. 16Mn and Fe-3.45C-2. 15Si-0. 80Mn alloys were discussed.展开更多
The hexanucleotide repeat mutation in the intron-1 of the chromosome 9 open reading frame (C9orf72) is a frequent cause of amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD). Altered RNA folding pla...The hexanucleotide repeat mutation in the intron-1 of the chromosome 9 open reading frame (C9orf72) is a frequent cause of amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD). Altered RNA folding plays a role in ALS pathogenesis in two ways: non-ATG translation of the repeat can lead to aggregates of the known C9orf72 specific dipeptide polymer, whereas the repeat also can form neurotoxic RNA inclusions that dose-responsively kill motor neurons. We report the presence of a homology in the 5’untranslated region (UTR) of the messenger RNA encoding C9orf72 with the iron responsive elements (IRE) that control expression of iron-associated transcripts and predict that this RNA structure may iron-dependently regulate C9orf72 translation. We previously report altered serum ferritin levels track with severity of ALS in patients. Here, we conduct bioinformatics analyses to determine the secondary structure of the 5’UTR in C9orf72 mRNA and find it aligned with IREs in the human mitochondrial cis-aconitase and L and H-ferritin transcripts. Comparison of the role of RNA repeats in Friedriech’s ataxia and fragile X mental retardation suggests the utility of RNA based therapies for treatment of ALS. Antisense oligonucleotides (ASO) have been reported to therapeutically target these GGGGCC repeats. At the same time, because the function of C9orf72 is unknown, knockdown strategies carry some risk of inducing or compounding haploinsufficiency. We propose, for consideration, an approach that may enhance its therapeutic dynamic range by increasing the 5’UTR driven translation of C9orf72 protein to compensate for any potential ALS-specific or ASO-induced haploinsufficieny.展开更多
Coupled with a petrographical study, I carried out an ion probe study of rare earth element microdistributions in mineral phases of silicate inclusions from the Colomera ⅡE iron meteorite. Most mineral grains have ho...Coupled with a petrographical study, I carried out an ion probe study of rare earth element microdistributions in mineral phases of silicate inclusions from the Colomera ⅡE iron meteorite. Most mineral grains have homogeneous REEs, but show considerable inter-grain variations by a factor of 2 to 100. The whole rock REE abundances for Colomera, estimated by combining REE data with modal abundances, are relatively LREE-enriched with REEs of -10'CI, which suggest that Colomera silicates were highly differentiated and might represent a low degree partial melt (-10%) of a chondritic source. REE geochemistry of Colomera silicate inclusions points to an origin that involves differentiation, dynamic mixing, remelting, reduction, recrystallization, and subsequent rapid cooling near the surface of a planetary body.展开更多
Taking double-die ironing for example, the plastic deformation behavior of theworkpiece in multidie ironing process is analysed by the rigid-plastic finite element method(RPFEM).Considering the strain hardening of the...Taking double-die ironing for example, the plastic deformation behavior of theworkpiece in multidie ironing process is analysed by the rigid-plastic finite element method(RPFEM).Considering the strain hardening of the material, the distrbutions of the effective strainrate and hydrostatic stress are obtained. Calculated results and the effect of die argles on thedeformation and ironing force are discussed. The companrson of calculated results with thcoe of ex-poriment shows a good agreement.展开更多
AIM:To study the role of hepcidin in hereditary hyperferritinemia cataract syndrome(HHCS). METHODS:Six patients from two families with HHCS, confirmed by genetic analysis showing A to G mutation at position+40 in the ...AIM:To study the role of hepcidin in hereditary hyperferritinemia cataract syndrome(HHCS). METHODS:Six patients from two families with HHCS, confirmed by genetic analysis showing A to G mutation at position+40 in the L-ferritin gene,were recruited to undergo serum hepcidin and prohepcidin measurements using radioimmunoassay and enzyme linked immunoassay,respectively,and measurements were compared with levels in serum from 25 healthy volunteers(14 females),mean age 36±11.9 years.RESULTS:The serum hepcidin and prohepcidin levels in patients with HHCS were 19.1±18.6 and 187± 120.9 ng/mL,respectively.Serum ferritin was 1716.3± 376μg/L.Liver biopsy in one patient did not show any evidence of iron overload.Serum hepcidin and prohepcidin values in healthy controls(HCs)were 15.30±15.71 and 236.88±83.68 ng/mL,respectively,while serum ferritin was 110±128.08μg/L.There was no statistical difference in serum hepcidin level between the two cohorts(19.1±18.6 ng/mL vs 15.30±15.71 ng/mL,P= 0.612)using two-tailed t-test. CONCLUSION:Serum hepcidin levels in HHCS patients is similar to that in HCs.Our study suggests that circulating ferritin is not a factor influencing hepcidin synthesis and does not have a role in the iron-sensing mechanism in hepatocytes.展开更多
Concentrations of Cr, Co, Ni, Cu, Ga, Ge, As, Sb, W, Re, Ir, Pt and Au of two ungrouped iron meteorites, Grove Mountains （GRV） 98003 from Antarctica and Ujimqin, were measured using instrumental neutron activation a...Concentrations of Cr, Co, Ni, Cu, Ga, Ge, As, Sb, W, Re, Ir, Pt and Au of two ungrouped iron meteorites, Grove Mountains （GRV） 98003 from Antarctica and Ujimqin, were measured using instrumental neutron activation analysis. According to the bulk chemistry, GRV 98003 is classified as a member of ⅠAB group, and Ujimqin as a unique one of ⅠAB iron meteorite complex. The elemental abundance pattern and correlation between elements （e. g. Ni-Au, Co-Au, As-Au, W- Au, Cu-Au, Sb-Au） of GRV 98003 are similar with those of NAW 468 （ⅠAB）, but significantly depleted in refractory siderophile elements （ Re, It） and moderate volatile elements （Ca, Ge） relative to the latter. In addition, we reclassify Nantan （ⅢCD） as a member of ⅠAB main group （MG） and Yongning （ⅠA） as a unique iron meteorite related with IAB iron meteorite complex.展开更多
The pure iron was melted and deoxidized by metallic Al and rare earth elements La, Ce and Y respectively at 1600℃ in a vertical resistance furnace. The morphology, chemical composition and size distribution of the in...The pure iron was melted and deoxidized by metallic Al and rare earth elements La, Ce and Y respectively at 1600℃ in a vertical resistance furnace. The morphology, chemical composition and size distribution of the inclusions in deoxidized liquid iron have been investigated by using of SEM and image-analysis techniques. The investigated results show that the deoxidation products in molten iron are complex inclusions of rare earth oxide or A12O3 combined with FeO finely distributed. The proper holding time and rapid cooling rate can make inclusions finer. La, Y and Al are more effective than Ce for obtaining finely distributed inclusions.展开更多
Glutamic acid and gamma-aminobutyric acid （GABA） influence iron content in the substantia nigra and globus pallidus, although the mechanisms of action remain unclear. The present study measured iron content and chan...Glutamic acid and gamma-aminobutyric acid （GABA） influence iron content in the substantia nigra and globus pallidus, although the mechanisms of action remain unclear. The present study measured iron content and changes in divalent metal transporter 1 （DMT1） and hephaestin expression in the substantia nigra and caudate putamen, and explored the effects of GABA and glutamic acid on iron metabolism. Results demonstrated that iron content and DMT1 non iron response element [DMT1 （-IRE）] expression were significantly greater but hephaestin expression was significantly lower in the caudate putamen of the monosodium glutamate group compared with the control group. No significant difference in iron content was detected between the GABA and control groups. DMT1 （-IRE） expression was significantly reduced, but hephaestin expressiori was significantly increased in the GABA group compared with the control group. In addition, there was no significant difference in tyrosine hydroxylase expression between monosodium glutamate and GABA groups and the control group. These results suggested that glutamate affected iron metabolism in the caudate putamen by increasing DMTI（-IRE） and decreasing hephaestin expression. In addition, GABA decreased DMT1 （-IRE） expression in the caudate putamen.展开更多
Solid wastes generated by the metallurgical industry contribute significantly towards the enhancement of environmental pollution. The handling, utilization, and safe disposal of these solid wastes are major concerns f...Solid wastes generated by the metallurgical industry contribute significantly towards the enhancement of environmental pollution. The handling, utilization, and safe disposal of these solid wastes are major concerns for the world. Dolochar is such a solid waste generated by the sponge iron industry. Investigations were carried out on the physical, mineralogical, and chemical characteristics for the efficient utilization of dolochar. The detailed studies on physico-chemical properties and petrography were carded out by optical microscopy, X-ray diffraction （XRD）, and scanning electron microscopy （SEM）. Characterization studies revealed that the dolochar consists of quartz （free as well as locked）, free lime, Fe particles, and Ca or Mg and/or Ca＋Mg＋Fe oxide phases. The washability data of-300 ~m dolochar samples indicated that clean coal with 41wt% ash at 18% yield can be produced from dolochar with 78wt% ash. The studies further suggested that the liberation of the dolochar is hard to achieve for clear separation. The dolochar is observed to have high ash fusion temperature and the un- burned carbon can be best utilized for power generation.展开更多
Four types of apatite have been identified in the Ningwu region. The first type of apatite is widely distributed in the middle dark colored zones （i.e. iron ores） of individual deposits. The assemblage includes magn...Four types of apatite have been identified in the Ningwu region. The first type of apatite is widely distributed in the middle dark colored zones （i.e. iron ores） of individual deposits. The assemblage includes magnetite, apatite and actinolite （or diopside）. The second type occurs within magnetite-apatite veins in the iron ores. The third type is seen in magnetite-apatite veins and （or） nodules in host rocks （i.e. gabbro-diorite porphyry or gabbro-diorite or pyroxene diorite）.The fourth type occurs within apatite-pyrite-quartz veins f＇dfing fractures in the Xiangshan Group. Rare earth elements （REE） geochemistry of apatite of the four occurrences in porphyry iron deposits is presented. The REE distribution patterns of apatite are generally similar to those of apatites in the Kiruna-type iron ores, nelsonites. They are enriched in fight REE, with pronounced negative Eu anomalies. The similarity of REE distribution patterns in apatites from various deposits in different locations in the world indicates a common process of formation for various ore types, e.g. immiscibility. Early magmatic apatites contain 3031.48-12080 ×10^-6 REE. Later hydrothermal apatite contains 1958 ×10^-6 REE, indicating that the later hydrothermal ore-forming solution contains lower REE. Although gabbro-diorite porphyry and apatite show similar REE patterns, gabbro-diorite porphyries have no europium anomalies or feeble positive or feeble negative europium anomalies, caused both by reduction environment of mantle source region and by fractionation and crystallization （immiscibility） under a high oxygen fugacity condition. Negative Eu anomalies of apatites were formed possibly due to acquisition of Eu^2＋ by earlier diopsite during ore magma cooling. The apatites in the Aoshan and Taishan iron deposits yield a narrow variation range of ^87Sr/^86Sr values from 0.7071 to 0.7073, similar to those of the volcanic and subvolcaulc rocks, indicating that apatites were formed by liquid immiscibility and differentiation of intermediate and basic magmas.展开更多
An incremental updated Lagrangian elasto-plastic finite element method(FEM) was employed to analyze the hole-flanging with the ironing of circulate plates using a pre-determined smaller hole at the center of the two-p...An incremental updated Lagrangian elasto-plastic finite element method(FEM) was employed to analyze the hole-flanging with the ironing of circulate plates using a pre-determined smaller hole at the center of the two-ply sheet metals. An extended rmin technique was employed such that each incremental step size can be determined not only by the yielding of an element Gaussian point, but also by the change under the boundary conditions of penetration, separation, and the alternation of the sliding-sticking state of friction along the tool-sheet interface. Two-ply sheet metals are generally composed of metals that have different mechanical properties. Thus, the forming process of these materials is complicated. A number of experiments and simulations were performed using a conical punch with a cone angle of 45°. The experimental results were compared with FEM-simulated results. It is found that using the elasto-plastic FEM can effectively predict the generation process of the deformed shape until unloading. The calculated sheet geometries and the relationship between punch load and punch travel are in good agreement with the experimental data.展开更多
The distribution behavior of residual elements copper and tin between FeO rich slag and iron solution was investigated under the condition of an induction furnace. The results indicate that a part of copper and tin is...The distribution behavior of residual elements copper and tin between FeO rich slag and iron solution was investigated under the condition of an induction furnace. The results indicate that a part of copper and tin is incidently oxidized when oxygen is blasted into bath to react with iron element. The distribution ratio of copper and tin between slag and metal is about 0.1. Phenomena of Cu and Sn elements segregation and accumulation in slag were observed by means of EPMA analysis. The distribution ratio of copper and tin between slag and metal may descend with increasing of CaO content in slag.展开更多
The graphite phase has been extracted from the nodular cast iron to measure the concentration of trace element in it. The impurity phase was removed from the extracted matter by dissolving it with HCl and HCl+H<sub...The graphite phase has been extracted from the nodular cast iron to measure the concentration of trace element in it. The impurity phase was removed from the extracted matter by dissolving it with HCl and HCl+H<sub>2</sub>O<sub>2</sub> to get the pure graphite phase. PIXE measurements were performed with thick targets of the pure graphite phase. Differences in the trace element concentrations between the graphite phase and the matrix have been observed. The effect of Ti and As in graphite phase on the nodularization rate and the mechanical properties have been studied.展开更多
The effect of F,K,and Na on the solid phase reaction of the Baiyunebo iron ore was investigated by differential thermal analysis （DTA） and X-ray diffraction（XRD）.It has been identified that alkaline elements K and...The effect of F,K,and Na on the solid phase reaction of the Baiyunebo iron ore was investigated by differential thermal analysis （DTA） and X-ray diffraction（XRD）.It has been identified that alkaline elements K and Na in the Baiyunebo ore instigate the formation of low melting point compounds Na2SiO3 and Na2O·Fe2O3 and the generation of molten state in the solid phase sintering.Element F in the Baiyunebo ore facilitates the formation of cuspidine compound 3CaO·2SiO2·CaF2 in the solid phase reaction.The cuspidine compound is kept in solid as one of the final products through the entire sintering process due to its high melting point.In the sintering process,CaF2and SiO2 react with CaO first and form 3CaO·2SiO2·CaF2 and 3CaO·2SiO2,so the formation of ferrites,Na2O·Fe2O3,and 2CaO·Fe2O3 is inhibited.展开更多
This work was carried out with the aim of using alloying and ageing processes to develop new alloys from grey cast iron that will have optimum properties suitable for the manufacturing of machine cutting tools. Four d...This work was carried out with the aim of using alloying and ageing processes to develop new alloys from grey cast iron that will have optimum properties suitable for the manufacturing of machine cutting tools. Four different alloys of grey cast iron with alloying composition of Fe-3% Al-2.5% Cr-2% Mo;Fe-3% Al-2% Cr-2% Mo;Fe-3% Al-2.5% Cr-1.5% Mo and Fe-3% Al-1.5% Cr-2% Mo were produced. The chemical analysis of both as-received base metal and produced alloys was determined using Spetro-CJRO Arc-Spectrometer. The microstructural properties and mechanical properties (hardness, impact toughness and ultimate tensile strength) of the produced alloys were determined for both as-cast samples and aged samples. The results showed that the addition of these alloying elements slightly decreased carbon, silicon and phosphorus content and thereby changed the hypereutectic cast iron to hypoeutectic by reducing the carbon equivalent. Also the morphology of graphite flake was changed as a result of the formation of nitrides and carbides of different phases. The results of the mechanical properties showed that the maximum hardness values obtained for each of the four alloys produced and aged at 300?C are 71.5 HRc, 69 HRc, 66.5 HRc and 65.4 HRc respectively. The maximum values for impact toughness obtained for each of the same produced alloys are 66 J, 63.6 J, 62 J and 60.3 J respectively. Also the maximum ultimate tensile strength values obtained for each of the alloys are 1380 N·mm-2, 1311 N·mm-2, 1260 N·mm-2 and 1190 N·mm-2. Comparing the properties obtained from the produced alloys with those of the commercial cutting tools, it was found that cutting tools manufactured from these produced alloys can compete favourably with cast cobalt tool, high speed steel (HSS) and tool steel.展开更多
基金Project(2019zzts684)supported by the Fundamental Research Funds for the Central Universities,China。
文摘The highly-dispersed iron element decorated Ni foam was prepared by simple immersion in a ferric nitrate solution at room temperature without using acid etching, and characterized by X-ray powder diffraction(XRD), scanning electron microscopy(SEM), EDAX spectrum(EDAX mapping) and Raman spectroscopy. The EDAX spectrum illustrated that iron element was highly-dispersed over the entire surface of nickel foam, and the Raman spectroscopy revealed that both Ni-O and Fe-O bonds were formed on the surface of the as-prepared electrode. Moreover, the iron element decorated Ni foam electrode can be used as non-enzymatic glucose sensor and it exhibits not only an ultra-wide linear concentration range of 1-18 mmol/L with an outstanding sensitivity of 1.0388 m A·mmol/(L·cm2), but also an excellent ability of stability and selectivity. Therefore, this work presents a simple yet effective approach to successfully modify Ni foam as non-enzymatic glucose sensor.
文摘The effects of alloying elements on the as-cast microstructures and mechanical properties of heavy section ductile cast iron were investigated to develop press die material having high strength and high ductility. Measurements of ultimate tensile strength, 0.2% proof strength, elongation and unnotched Charpy impact energy are presented as a function of alloy amounts within 0.25 to 0.75 wt pct range. Hardness is measured on the broken tensile specimens. The small additions of Mo, Cu, Ni and Cr changed the as-cast mechanical properties owing to the different as-cast matrix microstructures. The ferrite matrix of Mo and Ni alloyed cast iron exhibits low strength and hardness as well as high elongation and impact energy. The increase in Mo and Ni contents developed some fractions of pearlite structures near the austenite eutectic cell boundaries, which caused the elongation and impact energy to drop in a small range. Adding Cu and Cr elements rapidly changed the ferrite matrix into pearlite matrix, so strength and hardness were significantly increased. As more Mo and Cr were added, the size and fraction of primary carbides in the eutectic cell boundaries increased through the segregation of these elements into the intercellular boundaries.
文摘Austempered ductile iron(ADI) parts have a unique combination of high strength and toughness with excellent design flexibility and low cost. These excellent properties are directly related to its microstructure called "ausferrite" that is the result of austempering heat treatment applied to ductile irons. Alloying elements increase ADI austemperability and change speeds of austempering reactions. Thus, they can affect ADI resultant microstructure and mechanical properties. In this paper, the effects of alloying elements on ADI mechanical properties, microstructural changes, two-stage austempering reactions, processing windows, austemperability, and other aspects are reviewed.
基金supported by Erciyes University,Directorate of Research Fund (FUBAP-FBT-04-36)
文摘Iron mineralizations in the study area are found in amphibolites in the localities of Buyukoren,Uzunkuyu-Atkayasi,and Karabacak and they display a predominantly banded texture.Their paragenesis is dominated by magnetite and hematite.In this study,iron mineralizations in Sarikaya were examined in terms of rare earth element(REE) contents and attempts were made to determine some physicochemical conditions that had an impact upon their formation.For this purpose,42 ore samples and 17 enriched magnetite samples...
文摘An apparatus of zone melting unidirectional solidification with a steep temperature gradient and an impact fatigue tester were used.The effect of RE elements on the morphology of carbides and the impact fatigue properties of the low Cr white cast iron were investigated.Experimental results showed that the modi- fying effect of RE elements was remarkable on the M3C carbides.With the addition of RE elements in the low Cr iron,a lot of plate-like carbides were transformed into lath-like and rod-like ones.The higher the content of RE elements was,the more was the fraction of the lath-like and rod-like carbides.In the low Cr white cast iron,the RE modifying agent can efficiently increase the impact fatigue resistance and decrease the crack growth rate and delay the time of incipient cracking.With the increase of the content of RE elements in the low Cr cast iron,the impact fatigue resistance increased greatly and the crack growth rate decreased rap- idly.
文摘The effect of trace elements with zero self-interaction coefficient on crystallization temperature of iron carbon alloys was studied and the mathematic equation was developed based on thermodynamics in the present researeh. With the equation developed in this paper, the effects of nitrogen on crystallization temperature of Fe-3.45C-2.15Si0. 16Mn and Fe-3.45C-2. 15Si-0. 80Mn alloys were discussed.
文摘The hexanucleotide repeat mutation in the intron-1 of the chromosome 9 open reading frame (C9orf72) is a frequent cause of amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD). Altered RNA folding plays a role in ALS pathogenesis in two ways: non-ATG translation of the repeat can lead to aggregates of the known C9orf72 specific dipeptide polymer, whereas the repeat also can form neurotoxic RNA inclusions that dose-responsively kill motor neurons. We report the presence of a homology in the 5’untranslated region (UTR) of the messenger RNA encoding C9orf72 with the iron responsive elements (IRE) that control expression of iron-associated transcripts and predict that this RNA structure may iron-dependently regulate C9orf72 translation. We previously report altered serum ferritin levels track with severity of ALS in patients. Here, we conduct bioinformatics analyses to determine the secondary structure of the 5’UTR in C9orf72 mRNA and find it aligned with IREs in the human mitochondrial cis-aconitase and L and H-ferritin transcripts. Comparison of the role of RNA repeats in Friedriech’s ataxia and fragile X mental retardation suggests the utility of RNA based therapies for treatment of ALS. Antisense oligonucleotides (ASO) have been reported to therapeutically target these GGGGCC repeats. At the same time, because the function of C9orf72 is unknown, knockdown strategies carry some risk of inducing or compounding haploinsufficiency. We propose, for consideration, an approach that may enhance its therapeutic dynamic range by increasing the 5’UTR driven translation of C9orf72 protein to compensate for any potential ALS-specific or ASO-induced haploinsufficieny.
基金This work was partly supported by National Natural Science Foundation of China(Grant No.40325009)by“One-hundred Talent Program”of the Chinese Academy of Sciences.
文摘Coupled with a petrographical study, I carried out an ion probe study of rare earth element microdistributions in mineral phases of silicate inclusions from the Colomera ⅡE iron meteorite. Most mineral grains have homogeneous REEs, but show considerable inter-grain variations by a factor of 2 to 100. The whole rock REE abundances for Colomera, estimated by combining REE data with modal abundances, are relatively LREE-enriched with REEs of -10'CI, which suggest that Colomera silicates were highly differentiated and might represent a low degree partial melt (-10%) of a chondritic source. REE geochemistry of Colomera silicate inclusions points to an origin that involves differentiation, dynamic mixing, remelting, reduction, recrystallization, and subsequent rapid cooling near the surface of a planetary body.
文摘Taking double-die ironing for example, the plastic deformation behavior of theworkpiece in multidie ironing process is analysed by the rigid-plastic finite element method(RPFEM).Considering the strain hardening of the material, the distrbutions of the effective strainrate and hydrostatic stress are obtained. Calculated results and the effect of die argles on thedeformation and ironing force are discussed. The companrson of calculated results with thcoe of ex-poriment shows a good agreement.
基金Supported by Research and Development Department,Ealing Hospital NHS Trust,Uxbridge Road,Southall,London,UB13HW,United Kingdom
文摘AIM:To study the role of hepcidin in hereditary hyperferritinemia cataract syndrome(HHCS). METHODS:Six patients from two families with HHCS, confirmed by genetic analysis showing A to G mutation at position+40 in the L-ferritin gene,were recruited to undergo serum hepcidin and prohepcidin measurements using radioimmunoassay and enzyme linked immunoassay,respectively,and measurements were compared with levels in serum from 25 healthy volunteers(14 females),mean age 36±11.9 years.RESULTS:The serum hepcidin and prohepcidin levels in patients with HHCS were 19.1±18.6 and 187± 120.9 ng/mL,respectively.Serum ferritin was 1716.3± 376μg/L.Liver biopsy in one patient did not show any evidence of iron overload.Serum hepcidin and prohepcidin values in healthy controls(HCs)were 15.30±15.71 and 236.88±83.68 ng/mL,respectively,while serum ferritin was 110±128.08μg/L.There was no statistical difference in serum hepcidin level between the two cohorts(19.1±18.6 ng/mL vs 15.30±15.71 ng/mL,P= 0.612)using two-tailed t-test. CONCLUSION:Serum hepcidin levels in HHCS patients is similar to that in HCs.Our study suggests that circulating ferritin is not a factor influencing hepcidin synthesis and does not have a role in the iron-sensing mechanism in hepatocytes.
基金supposed by the National Natural Science Foundation of China(Grant No.40232026).
文摘Concentrations of Cr, Co, Ni, Cu, Ga, Ge, As, Sb, W, Re, Ir, Pt and Au of two ungrouped iron meteorites, Grove Mountains （GRV） 98003 from Antarctica and Ujimqin, were measured using instrumental neutron activation analysis. According to the bulk chemistry, GRV 98003 is classified as a member of ⅠAB group, and Ujimqin as a unique one of ⅠAB iron meteorite complex. The elemental abundance pattern and correlation between elements （e. g. Ni-Au, Co-Au, As-Au, W- Au, Cu-Au, Sb-Au） of GRV 98003 are similar with those of NAW 468 （ⅠAB）, but significantly depleted in refractory siderophile elements （ Re, It） and moderate volatile elements （Ca, Ge） relative to the latter. In addition, we reclassify Nantan （ⅢCD） as a member of ⅠAB main group （MG） and Yongning （ⅠA） as a unique iron meteorite related with IAB iron meteorite complex.
文摘The pure iron was melted and deoxidized by metallic Al and rare earth elements La, Ce and Y respectively at 1600℃ in a vertical resistance furnace. The morphology, chemical composition and size distribution of the inclusions in deoxidized liquid iron have been investigated by using of SEM and image-analysis techniques. The investigated results show that the deoxidation products in molten iron are complex inclusions of rare earth oxide or A12O3 combined with FeO finely distributed. The proper holding time and rapid cooling rate can make inclusions finer. La, Y and Al are more effective than Ce for obtaining finely distributed inclusions.
基金the National Natural Science Foundation of China, No. 30570957the Natural Science Foundation of Hebei Province, No. C2006000152, C2007000251
文摘Glutamic acid and gamma-aminobutyric acid （GABA） influence iron content in the substantia nigra and globus pallidus, although the mechanisms of action remain unclear. The present study measured iron content and changes in divalent metal transporter 1 （DMT1） and hephaestin expression in the substantia nigra and caudate putamen, and explored the effects of GABA and glutamic acid on iron metabolism. Results demonstrated that iron content and DMT1 non iron response element [DMT1 （-IRE）] expression were significantly greater but hephaestin expression was significantly lower in the caudate putamen of the monosodium glutamate group compared with the control group. No significant difference in iron content was detected between the GABA and control groups. DMT1 （-IRE） expression was significantly reduced, but hephaestin expressiori was significantly increased in the GABA group compared with the control group. In addition, there was no significant difference in tyrosine hydroxylase expression between monosodium glutamate and GABA groups and the control group. These results suggested that glutamate affected iron metabolism in the caudate putamen by increasing DMTI（-IRE） and decreasing hephaestin expression. In addition, GABA decreased DMT1 （-IRE） expression in the caudate putamen.
基金the Odisha State Pollution Control Board,Bhubaneswar,India
文摘Solid wastes generated by the metallurgical industry contribute significantly towards the enhancement of environmental pollution. The handling, utilization, and safe disposal of these solid wastes are major concerns for the world. Dolochar is such a solid waste generated by the sponge iron industry. Investigations were carried out on the physical, mineralogical, and chemical characteristics for the efficient utilization of dolochar. The detailed studies on physico-chemical properties and petrography were carded out by optical microscopy, X-ray diffraction （XRD）, and scanning electron microscopy （SEM）. Characterization studies revealed that the dolochar consists of quartz （free as well as locked）, free lime, Fe particles, and Ca or Mg and/or Ca＋Mg＋Fe oxide phases. The washability data of-300 ~m dolochar samples indicated that clean coal with 41wt% ash at 18% yield can be produced from dolochar with 78wt% ash. The studies further suggested that the liberation of the dolochar is hard to achieve for clear separation. The dolochar is observed to have high ash fusion temperature and the un- burned carbon can be best utilized for power generation.
基金This paper is financially aided by the National Natural Science Foundation of China （Grant No. 40472055）.
文摘Four types of apatite have been identified in the Ningwu region. The first type of apatite is widely distributed in the middle dark colored zones （i.e. iron ores） of individual deposits. The assemblage includes magnetite, apatite and actinolite （or diopside）. The second type occurs within magnetite-apatite veins in the iron ores. The third type is seen in magnetite-apatite veins and （or） nodules in host rocks （i.e. gabbro-diorite porphyry or gabbro-diorite or pyroxene diorite）.The fourth type occurs within apatite-pyrite-quartz veins f＇dfing fractures in the Xiangshan Group. Rare earth elements （REE） geochemistry of apatite of the four occurrences in porphyry iron deposits is presented. The REE distribution patterns of apatite are generally similar to those of apatites in the Kiruna-type iron ores, nelsonites. They are enriched in fight REE, with pronounced negative Eu anomalies. The similarity of REE distribution patterns in apatites from various deposits in different locations in the world indicates a common process of formation for various ore types, e.g. immiscibility. Early magmatic apatites contain 3031.48-12080 ×10^-6 REE. Later hydrothermal apatite contains 1958 ×10^-6 REE, indicating that the later hydrothermal ore-forming solution contains lower REE. Although gabbro-diorite porphyry and apatite show similar REE patterns, gabbro-diorite porphyries have no europium anomalies or feeble positive or feeble negative europium anomalies, caused both by reduction environment of mantle source region and by fractionation and crystallization （immiscibility） under a high oxygen fugacity condition. Negative Eu anomalies of apatites were formed possibly due to acquisition of Eu^2＋ by earlier diopsite during ore magma cooling. The apatites in the Aoshan and Taishan iron deposits yield a narrow variation range of ^87Sr/^86Sr values from 0.7071 to 0.7073, similar to those of the volcanic and subvolcaulc rocks, indicating that apatites were formed by liquid immiscibility and differentiation of intermediate and basic magmas.
文摘An incremental updated Lagrangian elasto-plastic finite element method(FEM) was employed to analyze the hole-flanging with the ironing of circulate plates using a pre-determined smaller hole at the center of the two-ply sheet metals. An extended rmin technique was employed such that each incremental step size can be determined not only by the yielding of an element Gaussian point, but also by the change under the boundary conditions of penetration, separation, and the alternation of the sliding-sticking state of friction along the tool-sheet interface. Two-ply sheet metals are generally composed of metals that have different mechanical properties. Thus, the forming process of these materials is complicated. A number of experiments and simulations were performed using a conical punch with a cone angle of 45°. The experimental results were compared with FEM-simulated results. It is found that using the elasto-plastic FEM can effectively predict the generation process of the deformed shape until unloading. The calculated sheet geometries and the relationship between punch load and punch travel are in good agreement with the experimental data.
文摘The distribution behavior of residual elements copper and tin between FeO rich slag and iron solution was investigated under the condition of an induction furnace. The results indicate that a part of copper and tin is incidently oxidized when oxygen is blasted into bath to react with iron element. The distribution ratio of copper and tin between slag and metal is about 0.1. Phenomena of Cu and Sn elements segregation and accumulation in slag were observed by means of EPMA analysis. The distribution ratio of copper and tin between slag and metal may descend with increasing of CaO content in slag.
文摘The graphite phase has been extracted from the nodular cast iron to measure the concentration of trace element in it. The impurity phase was removed from the extracted matter by dissolving it with HCl and HCl+H<sub>2</sub>O<sub>2</sub> to get the pure graphite phase. PIXE measurements were performed with thick targets of the pure graphite phase. Differences in the trace element concentrations between the graphite phase and the matrix have been observed. The effect of Ti and As in graphite phase on the nodularization rate and the mechanical properties have been studied.
基金supported by the National Natural Science Foundation of China(No.50664006)
文摘The effect of F,K,and Na on the solid phase reaction of the Baiyunebo iron ore was investigated by differential thermal analysis （DTA） and X-ray diffraction（XRD）.It has been identified that alkaline elements K and Na in the Baiyunebo ore instigate the formation of low melting point compounds Na2SiO3 and Na2O·Fe2O3 and the generation of molten state in the solid phase sintering.Element F in the Baiyunebo ore facilitates the formation of cuspidine compound 3CaO·2SiO2·CaF2 in the solid phase reaction.The cuspidine compound is kept in solid as one of the final products through the entire sintering process due to its high melting point.In the sintering process,CaF2and SiO2 react with CaO first and form 3CaO·2SiO2·CaF2 and 3CaO·2SiO2,so the formation of ferrites,Na2O·Fe2O3,and 2CaO·Fe2O3 is inhibited.
文摘This work was carried out with the aim of using alloying and ageing processes to develop new alloys from grey cast iron that will have optimum properties suitable for the manufacturing of machine cutting tools. Four different alloys of grey cast iron with alloying composition of Fe-3% Al-2.5% Cr-2% Mo;Fe-3% Al-2% Cr-2% Mo;Fe-3% Al-2.5% Cr-1.5% Mo and Fe-3% Al-1.5% Cr-2% Mo were produced. The chemical analysis of both as-received base metal and produced alloys was determined using Spetro-CJRO Arc-Spectrometer. The microstructural properties and mechanical properties (hardness, impact toughness and ultimate tensile strength) of the produced alloys were determined for both as-cast samples and aged samples. The results showed that the addition of these alloying elements slightly decreased carbon, silicon and phosphorus content and thereby changed the hypereutectic cast iron to hypoeutectic by reducing the carbon equivalent. Also the morphology of graphite flake was changed as a result of the formation of nitrides and carbides of different phases. The results of the mechanical properties showed that the maximum hardness values obtained for each of the four alloys produced and aged at 300?C are 71.5 HRc, 69 HRc, 66.5 HRc and 65.4 HRc respectively. The maximum values for impact toughness obtained for each of the same produced alloys are 66 J, 63.6 J, 62 J and 60.3 J respectively. Also the maximum ultimate tensile strength values obtained for each of the alloys are 1380 N·mm-2, 1311 N·mm-2, 1260 N·mm-2 and 1190 N·mm-2. Comparing the properties obtained from the produced alloys with those of the commercial cutting tools, it was found that cutting tools manufactured from these produced alloys can compete favourably with cast cobalt tool, high speed steel (HSS) and tool steel.
