Continental intraplate basalts form by partial melting of the mantle,and can provide important constraints on mantle heterogeneity.However,due to the thick overlying continental lithosphere,the origins of the geochemi...Continental intraplate basalts form by partial melting of the mantle,and can provide important constraints on mantle heterogeneity.However,due to the thick overlying continental lithosphere,the origins of the geochemical characteristics of continental intraplate basalts are controversial.In this study,we examined the geochemistry of Cenozoic basalts in southeast China.These basalts which are divided into four volcanic belts exhibit a DMM-EM2 mixing trend and spatial variations in Pb isotopes from inland(i.e.,thick lithosphere)to coastal(i.e.,thin lithosphere)regions.In contrast to the Pb isotopic variations,there are no spatial variations in Sr-Nd-Hf isotopes.Marked correlations between Pb isotopes and major elements(i.e.,Mg O and Si O_(2))suggest the continental lithospheric lid controlled their petrogenesis.Nonetheless,other factors are needed to explain the variations in Ti/Ti^(*)and Hf/Hf^(*)ratios,and Nd-Hf isotopes of the southeast China basalts.The increasing Pb isotope ratios from the inner to coastal regions are associated with decreases in CaO/Al_(2)O_(3) ratios and increases in FC3MS(FeO^(T)/CaO-3×Mg O/Si O_(2);in wt.%)values,indicating contributions from non-peridotite components in the mantle sources.The similarly depleted Nd-Hf isotopic compositions of the basalts from the three inner belts indicate these basalts have a similar origin,whereas the more enriched isotopic features of the basalts from the outer belt suggest their mantle source contains older recycled oceanic crust.Thus,source(i.e.,lithological)heterogeneity also had a significant role in controlling the geochemistry of these basalts.The DMM-EM2 mixing trend defined by the Pb isotopic compositions of continental intraplate basalts from southeast China was generated by variable degrees of melting of heterogeneous mantle that was controlled by the thickness of the continental lithospheric lid(i.e.,the melting pressure).This caused variable extents of melting of enriched components in the mantle sources of the basalts(i.e.,carbonated peridotite vs.pyroxenite).展开更多
The Paleo-Pacific Plate stagnated in the mantle transition zone beneath northeast Asia during the Late Mesozoic,resulting in the eastern Asian big mantle wedge(BMW).However,its formation mechanism remains unclear.Here...The Paleo-Pacific Plate stagnated in the mantle transition zone beneath northeast Asia during the Late Mesozoic,resulting in the eastern Asian big mantle wedge(BMW).However,its formation mechanism remains unclear.Here,we analyzed elemental and isotopic compositions of 126-60 Ma intraplate basaltic rocks to map the mantle flow pattern and investigate the implications for the formation of the BMW.These rocks exhibit eastward an increase in Ba/Nb,Ba/La,^(87)Sr/^(86)Sr,and^(208)Pb/^(204)Pb ratios,while a decrease in Nb/Yb,Zr/Yb,Ta/Yb,and Nb/Nb*ratios,indicating mixing between the fertile mantle and the depleted mantle modified by slab material,implying the occurrence of trench-perpendicular mantle flow.The coeval mantle flow and formation of the BMW,the similar directions of mantle flow and Paleo-Pacific Plate subduction,and migration of basin depocenters indicate trench-perpendicular mantle flow was a key factor in the formation of the BMW.Moreover,these basaltic rocks have elevatedδ^(66)Zn values(0.22‰to 0.52‰),indicating recycled carbonates have been added into their mantle source,which increased the mantle flow velocity.Combined with slab roll-back in the Late Mesozoic,it created the essential conditions for mantle flow to promote the formation of the eastern Asian BMW.展开更多
The Longshan orogenic belt is located in the southwestern margin of Ordos Basin at the junction zone between the Western Qinling and Northern Qilian orogenic belt.Voluminous Early Paleozoic magmatism in this area is o...The Longshan orogenic belt is located in the southwestern margin of Ordos Basin at the junction zone between the Western Qinling and Northern Qilian orogenic belt.Voluminous Early Paleozoic magmatism in this area is of key significance for determining the Early Paleozoic tectonic evolution and deep crust-mantle structure.Previous studies mainly focused on the Paleozoic granites;the coeval mafic rocks in this area are still poorly understood.A set of Late Silurian intraplate tholeiitic basalts has been discovered in Longshan area,providing key evidence for the mantle source and deep geodynamic background in this area.The Late Silurian Angou basalt has similar geochemical features as intraplate tholeiitic basalt,with high Na_(2)O/K_(2)O ratios(5.22-8.25),enriched in large ion lithophile elements and LREE.In combination with their relatively evolved Sr-Nd isotopic composition[^(87)Sr/^(86)Sr(i)=0.7128-0.7140;ε_(Nd)(t)=-5.55 to-3.40],it is suggested that it originated from decompression melting of metasomatized enriched mantle in extensional setting.These results indicate that the mantle source in the junction zone of the West Qinling-North Qilian orogenic belt evolved from depleted to enriched with the continuation of Proto-Tethys subduction from the Cambrian to the Silurian.These results are of great significance to understanding the genesis of contemporaneous granite and the crust-mantle interaction in the junction zone between the Western Qinling and Northern Qilian orogenic belt.展开更多
The Early Paleozoic tectono-thermal event was a significant orogenic activity during the Phanerozoic era,which had a profound impact on the early crust of the South China Block(SCB) and established the foundation for ...The Early Paleozoic tectono-thermal event was a significant orogenic activity during the Phanerozoic era,which had a profound impact on the early crust of the South China Block(SCB) and established the foundation for later tectonic activity.The Wuyi-Yunkai orogenic belt in Southeastern China was extensively exposed to Early Paleozoic magmatism,the genetic mechanism of which remains controversial.To shed light on this issue,detailed petrological,geochemical,and zircon U-Pb-Hf isotopic studies were carried out on two granitoids,namely the Yuntongshan pluton and the Gaoqiao pluton,identified in the central Wuyishan.Zircon U-Pb chronology of the Yuntongshan and Gaoqiao bodies yielded ages of437±4 Ma(MSWD=2.2) and 404±2 Ma(MSWD=12),respectively,indicating that they were emplaced during the Early Silurian and Early Devonian periods.These granitoids are primarily composed of biotite-granite and biotite-monzonitic-granites,with high concentrations of S_(i)O_(2)(73.59-75.91 wt%),K_(2)O+Na_(2)O(8.31-8.73wt%),and low contents of MgO,CaO,Cr,Ni.They are classified as high-K calc-alkaline and weakly metaluminous-strongly peraluminous S-type granites.These granitoids are enriched in light rare earth elements(LREEs) and large ion lithophile elements(LILEs) and depleted in heavy rare earth elements(HREEs) and high field strength elements(HFSEs) with arc affinity.The εHf(t) values of-3.3 to-15.4 with two-stage Hf model ages ranging from 2829 to 1644 Ma,combined with the presence of Neoproterozoic inherited zircons,suggest that the primary magma of these granitoids was derived from the partial melting of Neoproterozoic crust with a Paleoproterozoic crustal model age.These findings,combined with the spatio-temporal distribution of regional magmatism,reveal that the late Early-Paleozoic granitoids formed in the intraplate orogenic background originating from the subduction of the proto-Tethys Ocean and proto-Pacific Ocean around the margin of the east Gondwana supercontinent.展开更多
The detailed description of two granite complexes in the Olkhon subterrane is given.The Early Paleozoic Sharanur complex was formed by granitization of gneisses of the Olkhon series.It includes migmatites,granite-gnei...The detailed description of two granite complexes in the Olkhon subterrane is given.The Early Paleozoic Sharanur complex was formed by granitization of gneisses of the Olkhon series.It includes migmatites,granite-gneisses,granites and pegmatites of normal alkalinity;they belong to the type of syncollisional granites.The Middle Paleozoic Aya granite complex includes mother Aya massif of amazonite-bearing granites and several types of rare-metal pegmatites.They have elevated alkalinity,low of Ba,Sr,and high LILE and HFSE elements contents.The Aya pegmatites lie in northwest cracks of stretching and associated with the rise of the territory under the influence of the North Asian plume.These cracks and pegmatites mark the beginning of a new intraplate geodynamic setting.Two geochemical types are distinguished among the pegmatites of this complex.These are amazonite pegmatites of Li-F type with Ta mineralization and complex type pegmatite with Be-Rb-Nb-Ta and Li-F mineralization(the Ilixin vein).The Tashkiney pegmatite vein is similar to Ilixin,but lies in the gneisses of the Olkhon series.It shows high concentrations of Be,Nb,Ta,as well as W,Sn,but lacks Li and F,due to a greater depth and higher temperature of the melt crystallization of this pegmatite.展开更多
In the Langshan region, northwestern China, marked multi-stage intraplate deformation events have occurred since the Mesozoic, including（1） northeast-striking ductile left-lateral strike slip during the Middle-Late ...In the Langshan region, northwestern China, marked multi-stage intraplate deformation events have occurred since the Mesozoic, including（1） northeast-striking ductile left-lateral strike slip during the Middle-Late Triassic, which is closely related to the collision between the North China and the Yangtze plates;（2） top-to-the-southeast thrust with northwest-southeast trending maximum compression during the Late Jurassic;（3） nearly eastward detachment during the Early Cretaceous;（4） top-to-the-northwest thrust with northwest-southeast trending maximum compression during the Late Cretaceous and Early Cenozoic;（5） northeast-striking brittle left-lateral strike slip with nearly north-south trending maximum compression; and（6） northwest-southeast extension during the Middle-Late Cenozoic. All these deformation events belong to the intraplate deformation across the entire Central Asian region and respond to the tectonic events along the plate boundaries or deep tectonics. The structures developed in early events in the crust were the most important factors controlling the later deformation styles, and few new structures have later developed. Based on previous research and our results, the paleostress inversion in the Langshan region shows that the Mesozoic intraplate deformations in the study region mainly resulted from the tectonic events from the Paleo-Pacific region and have no or a weak relation to the Tethys region. During the Late Jurassic, the maximum compression from the Mongolia-Okhotsk region cannot be excluded. The Langshan region is the bridge between southern Mongolia and the western Ordos tectonic belt and is thus important to understand the nature and relationship between both regions.展开更多
The intraplate uplift of the Qinghai-Tibet Plateau took place on the basis of breakup and assembly of the Precambrian supercontinent, and southward ocean-continent transition of the Proto-, Paleo-, Meso- and Neo-Tethy...The intraplate uplift of the Qinghai-Tibet Plateau took place on the basis of breakup and assembly of the Precambrian supercontinent, and southward ocean-continent transition of the Proto-, Paleo-, Meso- and Neo-Tethys during the Caledonian, Indosinian, Yanshanian and Early Himalayan movements. The intraplate tectonic evolution of the Qinghai-Tibet Plateau underwent the early stage of intraplate orogeny characterized by migrational tectonic uplift, horizontal movement and geological processes during 180-7 Ma, and the late stage of isostatic mountain building characterized by pulsative rapid uplift, vertical movement and geographical processes since 3.6 Ma. The spatial-temporal evolution of the intraplate orogeny within the Qinghai-Tibet Plateau shows a regular transition from the northern part through the central part to the southern part during 180-120 Ma, 65-35 Ma, and 25-7 Ma respectively, with extensive intraplate faulting, folding, block movement, magmatism and metallogenesis. Simultaneous intraplate orogeny and basin formation resulted from crustal rheological stratification and basin-orogen coupling that was induced by lateral viscous flow in the lower crust. This continental dynamic process was controlled by lateral flow of hot and soft materials within the lower crust because of slab dehydration and melted mantle upwelling above the subducted plates during the southward Tethyan ocean-continent transition processes or asthenosphere diapirism. Intraplate orogeny and basin formation were irrelevant to plate collision. The Qinghai-Tibet Plateau as a whole was actually formed by the isostatic mountain building processes since 3.6 Ma that were characterized by crust-scale vertical movement, and integral rapid uplift of the plateau, accompanied by isostatic subsidence of peripheral basins and depressions, and great changes in topography and environment. A series of pulsative mountain building events, associated with gravity equilibrium and isostatic adjustment of crustal materials, at 3.6 Ma, 2.5 Ma, 1.8-1.2 Ma, 0.9-0.8 Ma and 0.15-0.12 Ma led to the formation of a composite orogenic belt by unifying the originally relatively independent Himalayas, Gangdise, Tanghla, Longmenshan, Kunlun, Altyn Tagh, and Qilian mountains, and the formation of the complete Qinghai-Tibet Plateau with a unified mountain root after Miocene uplift of the plateau as a whole.展开更多
Almost all intraplate caprocks experienced strong deformation during the convergence of microplates, and then disintegrated into many secondary geologic units with the special characters, such as irregular boundaries ...Almost all intraplate caprocks experienced strong deformation during the convergence of microplates, and then disintegrated into many secondary geologic units with the special characters, such as irregular boundaries and particular structural assemblages. In order to understand the formation mechanism of these special phenomena, a rheological experiment on the structural scenery of the Tongling area is carried out. The result shows that the primary regular and uniform boundaries of the Tongling area becomes irregular because of the enclosing and confinement of surrounding geological units in the process of 'compression-shearing-rotation-drag'; simultaneously, two specific 'drag depressions' developed at two opposite corners of the block. The former and the later phenomena can be regarded as a typical regional-scale rheological effect and necessary outcome of intraplate deformation respectively.展开更多
Intraplate processes,such as continental surface uplift and intraplate volcanism,are enigmatic and the underlying mechanisms responsible are not fully understood.Central Mongolia is an ideal natural laboratory for stu...Intraplate processes,such as continental surface uplift and intraplate volcanism,are enigmatic and the underlying mechanisms responsible are not fully understood.Central Mongolia is an ideal natural laboratory for studying such processes because of its location in the continental interior far from tectonic plate boundaries.展开更多
In this paper we carried out an investigation about the possible causes for the enhancement of earthquakes in USA the last seven years. Our statistical and physical models indicated that the increased evolution of eve...In this paper we carried out an investigation about the possible causes for the enhancement of earthquakes in USA the last seven years. Our statistical and physical models indicated that the increased evolution of events in the country depends from the human actions. For further analysis we divided the country into three main seismological regions: western, central and, eastern. We roughly classified the areas by their thickness of Earth’s crust in a variation 25-45-25 km. The thickest area is in the mid-continent and most of this region are part of the Great Plains. In our study we are going to investigate the reason for the Mississippi Lime in Oklahoma a very thick area, started an unusual earthquake activity since 2010, most at Oklahoma/Kansas border. In this region also there are many anthropogenic activities concerning with the waste water wells and more than 4000 of them are active in the state. Wastewater disposal wells typically operate for longer duration and inject much more fluid than hydraulic fracturing, making them more likely to induce earthquakes. Enhanced oil recovery injects fluid into rock layers where oil and gas have already been extracted, while wastewater injection often occurs in never-before-touched rocks. Therefore, wastewater injection can raise pressure levels more than enhanced oil recovery, and thus increases the likelihood of induced earthquakes. Most injection wells do not trigger felt earthquakes. A combination of many factors is necessary for injection to induce felt earthquakes. These include the injection rate and total volume injected;the presence of faults or unknown fractures that are large enough to produce felt earthquakes;stresses that are large enough to produce earthquakes;and the presence of pathways for the fluid pressure to travel from the injection point to faults. Finally other causes of human action triggering earthquakes fluid injection, hydraulic fracturing, enhanced oil recovery, mining, nuclear explosions, some of them will be mentioned and investigated in this paper. We also intend to explain why not all the waste wells are triggering earthquakes and how it would be strongly attached to the unevenness of the Earth’s crust.展开更多
In this paper,the data of vertical crustal deformations associated with the Xingtai,Haicheng,Tangshan and Datong strong earthquakes in North China Block have been processed,analyzed and studied.The result shows that t...In this paper,the data of vertical crustal deformations associated with the Xingtai,Haicheng,Tangshan and Datong strong earthquakes in North China Block have been processed,analyzed and studied.The result shows that the seismogenic processes of strong earthquakes are accompanied by an evolution of crustal deformation as follows: ① The area of crustal deformation anomaly should be large in radius and extensive in range. ② There are both the 'field' and 'source' of crustal deformation anomaly,with the 'source' existing inside the'field' but differing from the 'field' distinctly. ③ The evolution process includes a number of steps.Firstly, movements in the 'field region transform from the normal state to an anomalous state to start the formation of field precursors.Secondly,movements in the 'source' region become outstandingly remarkable. Thirdly,anomalies in the 'field' region that surrounds the 'source' become increasingly intense.Fourthly,the 'source' region enters a state of immobilized-movement.Finally,an earthquake occurs. ④ There are usually one or more areas where the anomaly field forms a special pattern,mostly a four-quadrant distribution.The area which is'activated' first but becomes 'immobilized' afterwards often coincides with the source area.⑤ The appearance of an obviously immobilized area inside the obviously activated area is a precursory feature which suggests that an earthquake is impending.⑥ The longer the duration of immobilized-movement,the higher the magnitude of earthquake would be.The above might be the basic mode of vertical crustal deformation during the seismogenic process of strong intraplate earthquakes.展开更多
We used matched filter, spectrum analysis, and continuation methods of potential field for data processing and obtained the geomagnetic field distribution about the continent and continental margin in southeast China....We used matched filter, spectrum analysis, and continuation methods of potential field for data processing and obtained the geomagnetic field distribution about the continent and continental margin in southeast China. On the basis of grid data, inversion was conducted and magnetic field distribution and magnetic structure on bedding of different depths were obtained. The new results show that: 1. The magnetic field characteristics are largely different in horizontal and vertical directions and they can be divided into zones according to the continental blocks of Yangtze, Cathaysia, Kangdian (Sichuan-Yunnan) and Qinling-Dabie. 2. The Tanlu fault extends southward along the Ganjiang fault and the Wuchuan-Sihui fault after it crossed over the Yangtze River and was offset locally in the east-west direction. The Tanlu fault finally slips into the South China Sea at Hainan Island. 3. The boundary between Yangtze and Cathaysia blocks starts from Hangzhou Bay in the east, extends along Jiangshao fault and passes through Nanchang, Changsha, and Guilin, and finally enters the sea at Qinzhou, Guangxi. 4. The distribution of buried structure zone is located at 24.5°-26° N.展开更多
This paper analyzes the multifractal characteristics of spatio-temporal distribution of generalized strain release of earthquakes （GSRE） occurred in the eastern and western Chinese mainland （as an instance of intra...This paper analyzes the multifractal characteristics of spatio-temporal distribution of generalized strain release of earthquakes （GSRE） occurred in the eastern and western Chinese mainland （as an instance of intraplate region）, Taiwan region and New Zealand （as an instance of interplate region）. The results show that the multifractal characteristics of GSRE are closely related to the geodynamic environment. For the temporal distribution of strong events, the clustering feature is more evident in the interplate regions than that in the intraplate regions, while for small and moderate events, this difference is ambiguous. For the spatial distribution of strong earthquakes, the clustering feature is usually clearer in the intraplate regions than that in the interplate regions, while for small and moderate events, the case is just opposite.展开更多
In this contribution,detailed field descriptions together with petrographic and bulk-rock major,trace and rare earth elements(REE)data are used to constrain the origin and geodynamic setting of the mafic magmatic encl...In this contribution,detailed field descriptions together with petrographic and bulk-rock major,trace and rare earth elements(REE)data are used to constrain the origin and geodynamic setting of the mafic magmatic enclaves(MMEs)recently discovered within the Pan-African Ngaoundal pluton,Adamawa area,central Cameroon.The investigated MMEs are dark-colored with chilled margins,and display medium to coarse-grain igneous textures.The mineral assemblage is either dominated by K-feldspar and carbonate(group Ⅰ),or by amphibole and plagioclase(group Ⅱ),though the overall mineral phases made of amphibole,plagioclase,K-feldspar,and biotite are similar to that of their host syenite but in different proportions.The MMEs in Ngaoundal area are foid-gabbro in composition with SiO_(2) contents ranging between 41.52% and 43.74% and are contiguous with their host granitoids of intermediate composition(SiO_(2)=57.52% to 58.98%).The host granitoid rocks are metaluminous,and belong to the shoshonitic series.Petrographic and geochemical data have revealed that the Ngaoundal MMEs derived from rapid cooling of hot injected lithospheric mantle-derived magma within cooler host granitoids magma and were emplaced in the intraplate geodynamic setting.展开更多
The definition of an 'intraplate fixed' frame remains a significant error source for crustal motion studies at a few millimeters per year level. An appropriate implementation of such a frame is very important ...The definition of an 'intraplate fixed' frame remains a significant error source for crustal motion studies at a few millimeters per year level. An appropriate implementation of such a frame is very important to avoid biased velocities and to confirm a valid geophysical interpretation. Here, we establish the newest global plate motion model of ITRF2000VEL and research the definition of an Asian-fixed frame in Asia using the ITRF2000 velocity field. By X2 and F ratio tests, we find a subset site in Asia that satisfies a rigid cap rotation with residual velocities <0. 95 mm/a and provide a stable Asia reference frame (SARF). In this reference frame, we find residual velocities at Asiatic ITRF2000 sites that are consistent with known active tectonic feature. An important result of this study is the identification of internal deformation of the order of 1-2 mm/a in an area usually interpreted as 'stable' Asia. These results should be further checked as newer, denser and more accurate space geodetic data sets with longer observation time span, which become available for Asia.展开更多
Intraplate volcanism was widespread in southeastern Queensland during the mid Cenozoic,leaving a legacy of variably eroded volcanoes and rugged topography known locally as“The Scenic Rim”.These plume-derived volcano...Intraplate volcanism was widespread in southeastern Queensland during the mid Cenozoic,leaving a legacy of variably eroded volcanoes and rugged topography known locally as“The Scenic Rim”.These plume-derived volcanoes provide a detailed record of northward Australian plate velocity,and indicate a major slowdown commencing at 26 Ma and persisting until 23 Ma,correlated with initial collision of the massive Ontong Java plateau with the northern subduction margin of the Australian plate.Despite traversing over 36 km of continental crust,trace element and isotopic signatures indicate little or only minor contamination for most units,with the exception of rhyolites formed during the period of slow plate velocity.Nevertheless,the thick continental crust allowed magmas to stall and fractionate during ascent,often producing highly evolved rocks(e.g.,comendites)containing extreme concentrations of incompatible elements,including>2000 ppm Zr.Meanwhile,isotopic and trace element results from mafic units are consistent with melting and mixing of depleted upper mantle and an EM1-like source.Alkaline mafic eruptions also often contain abundant upper mantle and lower crustal xenoliths,providing excellent samples of these otherwise inaccessible regions.Denudation has produced good exposures of the subsurface magmatic architecture,a variety of landscapes,and diverse wildlife habitats;as a result many of the volcanoes are contained in National Parks,including the World Heritage listed Gondwana Rainforests of Australia.展开更多
Intraplate structural deformation is diagnostic of tectonic stress regime changes linked to plate interactions and can result from superposed tectonic events whose single contributions are hardly distinguishable.In th...Intraplate structural deformation is diagnostic of tectonic stress regime changes linked to plate interactions and can result from superposed tectonic events whose single contributions are hardly distinguishable.In this paper,we present a set of integrated thermochronologic inverse models along a 140 km-long transect across the central Greater Caucasus and the adjacent Adjara-Trialeti fold-and-thrust belt of Georgia,two intraplate orogens produced by structural inversion of parallel continental rift zones located on the Eurasian plate.Our dataset allows to distinguish discrete and superposed deformation episodes and quantify their respective contributions to orogenic exhumation.The integration of(U-Th)/He analysis on apatite and zircon,fission-track analysis on apatite,and peak-temperature determinations(clay mineralogy,organic matter petrography,Raman spectroscopy)shows that structural inversion was punctuated by two incremental steps starting respectively in the latest Cretaceous and the mid-Miocene.Latest Cretaceous partial inversion of the Greater Caucasus is documented here for the first time and placed in a geographically wider context of coeval deformation.The two episodes of intraplate structural inversion,exhumation,and sediment generation are chronologically and physically correlated with docking of(i)the Anatolide-Tauride-Armenian terrane(Late Cretaceous-Paleocene)and(ii)Arabia(Miocene hard collision)against the southern Eurasian plate margin.Intraplate deformation in the Caucasian domain was triggered by far-field propagation of plate-margin collisional stress which focused preferentially along rheologically weak rift zones.展开更多
The roles of subduction of the Pacific plate and the big mantle wedge(BMW) in the evolution of east Asian continental margin have attracted lots of attention in past years. This paper reviews recent progresses regardi...The roles of subduction of the Pacific plate and the big mantle wedge(BMW) in the evolution of east Asian continental margin have attracted lots of attention in past years. This paper reviews recent progresses regarding the composition and chemical heterogeneity of the BMW beneath eastern Asia and geochemistry of Cenozoic basalts in the region, with attempts to put forward a general model accounting for the generation of intraplate magma in a BMW system. Some key points of this review are summarized in the following.(1) Cenozoic basalts from eastern China are interpreted as a mixture of high-Si melts and low-Si melts. Wherever they are from, northeast, north or south China, Cenozoic basalts share a common low-Si basalt endmember, which is characterized by high alkali, Fe_2O_3~T and TiO_2 contents, HIMU-like trace element composition and relatively low ^(206)Pb/^(204)Pb compared to classic HIMU basalts. Their Nd-Hf isotopic compositions resemble that of Pacific Mantle domain and their source is composed of carbonated eclogites and peridotites. The high-Si basalt endmember is characterized by low alkali, Fe_2O_3~T and TiO_2 contents, Indian Mantle-type Pb-Nd-Hf isotopic compositions, and a predominant garnet pyroxenitic source. High-Si basalts show isotopic provinciality, with those from North China and South China displaying EM1-type and EM2-type components, respectively, while basalts from Northeast China containing both EM1-and EM2-type components.(2) The source of Cenozoic basalts from eastern China contains abundant recycled materials, including oceanic crust and lithospheric mantle components as well as carbonate sediments and water. According to their spatial distribution and deep seismic tomography, it is inferred that the recycled components are mostly from stagnant slabs in the mantle transition zone,whereas EM1 and EM2 components are from the shallow mantle.(3) Comparison of solidi of garnet pyroxenite, carbonated eclogite and peridotite with regional geotherm constrains the initial melting depth of high-Si and low-Si basalts at <100 km and^300 km, respectively. It is suggested that the BMW under eastern Asia is vertically heterogeneous, with the upper part containing EM1 and EM2 components and isotopically resembling the Indian mantle domain, whereas the lower part containing components derived from the Pacific mantle domain. Contents of H_2O and CO_2 decrease gradually from bottom to top of the BMW.(4) Melting of the BMW to generate Cenozoic intraplate basalts is triggered by decarbonization and dehydration of the slabs stagnated in the mantle transition zone.展开更多
Transpression occurs in response to oblique convergence across a deformation zone in intraplate regions and plate boundaries.The Korean Peninsula is located at an intraplate region of the eastern Eurasian Plate and ha...Transpression occurs in response to oblique convergence across a deformation zone in intraplate regions and plate boundaries.The Korean Peninsula is located at an intraplate region of the eastern Eurasian Plate and has been deformed under the ENE–WSW maximum horizontal compression since the late Pliocene.In this study,we analyzed short-term instrumental seismic(focal mechanism)and long-term paleoseis-mic(Quaternary fault outcrop)data to decipher the neotectonic crustal deformation pattern in the south-eastern Korean Peninsula.Available(paleo-)seismic data acquired from an NNE–SSW trending deformation zone between the Yangsan and Ulleung fault zones indicate spatial partitioning of crustal deformation by NNW–SSE to NNE–SSW striking reverse faults and NNE–SSW striking strike-slip faults,supporting a strike-slip partitioned transpression model.The instantaneous and finite neotectonic strains,estimated from the focal mechanism and Quaternary outcrop data,respectively,show discrepan-cies in their axes,which can be attributed to the switching between extensional and intermediate axes of finite strain during the accumulation of wrench-dominated transpression.Notably,some major faults,including the Yangsan and Ulsan fault zones,are relatively misoriented to slip under the current stress condition but,paradoxically,have more(paleo-)seismic records indicating their role in accommodating the neotectonic transpressional strain.We propose that fluids,heat flow,and lithospheric structure are potential factors affecting the reactivation of the relatively misoriented major faults.Our findings provide insights into the accommodation pattern of strain associated with the neotectonic crustal extrusion in an intraplate region of the eastern Eurasian Plate in response to the collision of the Indian Plate and the sub-duction of the Pacific/Philippine Sea Plates.展开更多
基金supported by the National Natural Science Foundation of China(No.41906051)the National Key R&D Program of China(No.2018YFE0202402)+1 种基金sponsored by the Fundamental Research Funds for the Central Universities(Tongji University)(No.22120210525)Shanghai Pilot Program for Basic Research。
文摘Continental intraplate basalts form by partial melting of the mantle,and can provide important constraints on mantle heterogeneity.However,due to the thick overlying continental lithosphere,the origins of the geochemical characteristics of continental intraplate basalts are controversial.In this study,we examined the geochemistry of Cenozoic basalts in southeast China.These basalts which are divided into four volcanic belts exhibit a DMM-EM2 mixing trend and spatial variations in Pb isotopes from inland(i.e.,thick lithosphere)to coastal(i.e.,thin lithosphere)regions.In contrast to the Pb isotopic variations,there are no spatial variations in Sr-Nd-Hf isotopes.Marked correlations between Pb isotopes and major elements(i.e.,Mg O and Si O_(2))suggest the continental lithospheric lid controlled their petrogenesis.Nonetheless,other factors are needed to explain the variations in Ti/Ti^(*)and Hf/Hf^(*)ratios,and Nd-Hf isotopes of the southeast China basalts.The increasing Pb isotope ratios from the inner to coastal regions are associated with decreases in CaO/Al_(2)O_(3) ratios and increases in FC3MS(FeO^(T)/CaO-3×Mg O/Si O_(2);in wt.%)values,indicating contributions from non-peridotite components in the mantle sources.The similarly depleted Nd-Hf isotopic compositions of the basalts from the three inner belts indicate these basalts have a similar origin,whereas the more enriched isotopic features of the basalts from the outer belt suggest their mantle source contains older recycled oceanic crust.Thus,source(i.e.,lithological)heterogeneity also had a significant role in controlling the geochemistry of these basalts.The DMM-EM2 mixing trend defined by the Pb isotopic compositions of continental intraplate basalts from southeast China was generated by variable degrees of melting of heterogeneous mantle that was controlled by the thickness of the continental lithospheric lid(i.e.,the melting pressure).This caused variable extents of melting of enriched components in the mantle sources of the basalts(i.e.,carbonated peridotite vs.pyroxenite).
基金financially supported by the National Key R&D Program of China(No.2022YFF0801002)the National Natural Science Foundation of China(No.42372065)the Natural Science Foundation of Jilin Province(No.20220101178JC)。
文摘The Paleo-Pacific Plate stagnated in the mantle transition zone beneath northeast Asia during the Late Mesozoic,resulting in the eastern Asian big mantle wedge(BMW).However,its formation mechanism remains unclear.Here,we analyzed elemental and isotopic compositions of 126-60 Ma intraplate basaltic rocks to map the mantle flow pattern and investigate the implications for the formation of the BMW.These rocks exhibit eastward an increase in Ba/Nb,Ba/La,^(87)Sr/^(86)Sr,and^(208)Pb/^(204)Pb ratios,while a decrease in Nb/Yb,Zr/Yb,Ta/Yb,and Nb/Nb*ratios,indicating mixing between the fertile mantle and the depleted mantle modified by slab material,implying the occurrence of trench-perpendicular mantle flow.The coeval mantle flow and formation of the BMW,the similar directions of mantle flow and Paleo-Pacific Plate subduction,and migration of basin depocenters indicate trench-perpendicular mantle flow was a key factor in the formation of the BMW.Moreover,these basaltic rocks have elevatedδ^(66)Zn values(0.22‰to 0.52‰),indicating recycled carbonates have been added into their mantle source,which increased the mantle flow velocity.Combined with slab roll-back in the Late Mesozoic,it created the essential conditions for mantle flow to promote the formation of the eastern Asian BMW.
基金supported by the National Natural Science Foundation of China(42172010,42372071,41102037)。
文摘The Longshan orogenic belt is located in the southwestern margin of Ordos Basin at the junction zone between the Western Qinling and Northern Qilian orogenic belt.Voluminous Early Paleozoic magmatism in this area is of key significance for determining the Early Paleozoic tectonic evolution and deep crust-mantle structure.Previous studies mainly focused on the Paleozoic granites;the coeval mafic rocks in this area are still poorly understood.A set of Late Silurian intraplate tholeiitic basalts has been discovered in Longshan area,providing key evidence for the mantle source and deep geodynamic background in this area.The Late Silurian Angou basalt has similar geochemical features as intraplate tholeiitic basalt,with high Na_(2)O/K_(2)O ratios(5.22-8.25),enriched in large ion lithophile elements and LREE.In combination with their relatively evolved Sr-Nd isotopic composition[^(87)Sr/^(86)Sr(i)=0.7128-0.7140;ε_(Nd)(t)=-5.55 to-3.40],it is suggested that it originated from decompression melting of metasomatized enriched mantle in extensional setting.These results indicate that the mantle source in the junction zone of the West Qinling-North Qilian orogenic belt evolved from depleted to enriched with the continuation of Proto-Tethys subduction from the Cambrian to the Silurian.These results are of great significance to understanding the genesis of contemporaneous granite and the crust-mantle interaction in the junction zone between the Western Qinling and Northern Qilian orogenic belt.
基金supported by the National Natural Science Foundation of China (No.41702204)the Central Fundamental Research (grant number DZLXJK201504)the Major State Research Development Program of China (grant number 2016YFC0600202)。
文摘The Early Paleozoic tectono-thermal event was a significant orogenic activity during the Phanerozoic era,which had a profound impact on the early crust of the South China Block(SCB) and established the foundation for later tectonic activity.The Wuyi-Yunkai orogenic belt in Southeastern China was extensively exposed to Early Paleozoic magmatism,the genetic mechanism of which remains controversial.To shed light on this issue,detailed petrological,geochemical,and zircon U-Pb-Hf isotopic studies were carried out on two granitoids,namely the Yuntongshan pluton and the Gaoqiao pluton,identified in the central Wuyishan.Zircon U-Pb chronology of the Yuntongshan and Gaoqiao bodies yielded ages of437±4 Ma(MSWD=2.2) and 404±2 Ma(MSWD=12),respectively,indicating that they were emplaced during the Early Silurian and Early Devonian periods.These granitoids are primarily composed of biotite-granite and biotite-monzonitic-granites,with high concentrations of S_(i)O_(2)(73.59-75.91 wt%),K_(2)O+Na_(2)O(8.31-8.73wt%),and low contents of MgO,CaO,Cr,Ni.They are classified as high-K calc-alkaline and weakly metaluminous-strongly peraluminous S-type granites.These granitoids are enriched in light rare earth elements(LREEs) and large ion lithophile elements(LILEs) and depleted in heavy rare earth elements(HREEs) and high field strength elements(HFSEs) with arc affinity.The εHf(t) values of-3.3 to-15.4 with two-stage Hf model ages ranging from 2829 to 1644 Ma,combined with the presence of Neoproterozoic inherited zircons,suggest that the primary magma of these granitoids was derived from the partial melting of Neoproterozoic crust with a Paleoproterozoic crustal model age.These findings,combined with the spatio-temporal distribution of regional magmatism,reveal that the late Early-Paleozoic granitoids formed in the intraplate orogenic background originating from the subduction of the proto-Tethys Ocean and proto-Pacific Ocean around the margin of the east Gondwana supercontinent.
基金The study was conducted within the framework of the state task(topic ID 0350-2019-0007)and supported by grant 20-55-44002-Mong_a of the Russian Foundation for Basic Research.
文摘The detailed description of two granite complexes in the Olkhon subterrane is given.The Early Paleozoic Sharanur complex was formed by granitization of gneisses of the Olkhon series.It includes migmatites,granite-gneisses,granites and pegmatites of normal alkalinity;they belong to the type of syncollisional granites.The Middle Paleozoic Aya granite complex includes mother Aya massif of amazonite-bearing granites and several types of rare-metal pegmatites.They have elevated alkalinity,low of Ba,Sr,and high LILE and HFSE elements contents.The Aya pegmatites lie in northwest cracks of stretching and associated with the rise of the territory under the influence of the North Asian plume.These cracks and pegmatites mark the beginning of a new intraplate geodynamic setting.Two geochemical types are distinguished among the pegmatites of this complex.These are amazonite pegmatites of Li-F type with Ta mineralization and complex type pegmatite with Be-Rb-Nb-Ta and Li-F mineralization(the Ilixin vein).The Tashkiney pegmatite vein is similar to Ilixin,but lies in the gneisses of the Olkhon series.It shows high concentrations of Be,Nb,Ta,as well as W,Sn,but lacks Li and F,due to a greater depth and higher temperature of the melt crystallization of this pegmatite.
基金funded by the National Science Foundation of China (Nos. 41172198, 40702032)China Geological Survey Project (Nos. 12120113096400, 1212011121064)
文摘In the Langshan region, northwestern China, marked multi-stage intraplate deformation events have occurred since the Mesozoic, including（1） northeast-striking ductile left-lateral strike slip during the Middle-Late Triassic, which is closely related to the collision between the North China and the Yangtze plates;（2） top-to-the-southeast thrust with northwest-southeast trending maximum compression during the Late Jurassic;（3） nearly eastward detachment during the Early Cretaceous;（4） top-to-the-northwest thrust with northwest-southeast trending maximum compression during the Late Cretaceous and Early Cenozoic;（5） northeast-striking brittle left-lateral strike slip with nearly north-south trending maximum compression; and（6） northwest-southeast extension during the Middle-Late Cenozoic. All these deformation events belong to the intraplate deformation across the entire Central Asian region and respond to the tectonic events along the plate boundaries or deep tectonics. The structures developed in early events in the crust were the most important factors controlling the later deformation styles, and few new structures have later developed. Based on previous research and our results, the paleostress inversion in the Langshan region shows that the Mesozoic intraplate deformations in the study region mainly resulted from the tectonic events from the Paleo-Pacific region and have no or a weak relation to the Tethys region. During the Late Jurassic, the maximum compression from the Mongolia-Okhotsk region cannot be excluded. The Langshan region is the bridge between southern Mongolia and the western Ordos tectonic belt and is thus important to understand the nature and relationship between both regions.
基金supported by the China National Science Foundation (Grant No: 40572113)China national key basic research program for earlier stage study (Grant No: 2005CCA05600)
文摘The intraplate uplift of the Qinghai-Tibet Plateau took place on the basis of breakup and assembly of the Precambrian supercontinent, and southward ocean-continent transition of the Proto-, Paleo-, Meso- and Neo-Tethys during the Caledonian, Indosinian, Yanshanian and Early Himalayan movements. The intraplate tectonic evolution of the Qinghai-Tibet Plateau underwent the early stage of intraplate orogeny characterized by migrational tectonic uplift, horizontal movement and geological processes during 180-7 Ma, and the late stage of isostatic mountain building characterized by pulsative rapid uplift, vertical movement and geographical processes since 3.6 Ma. The spatial-temporal evolution of the intraplate orogeny within the Qinghai-Tibet Plateau shows a regular transition from the northern part through the central part to the southern part during 180-120 Ma, 65-35 Ma, and 25-7 Ma respectively, with extensive intraplate faulting, folding, block movement, magmatism and metallogenesis. Simultaneous intraplate orogeny and basin formation resulted from crustal rheological stratification and basin-orogen coupling that was induced by lateral viscous flow in the lower crust. This continental dynamic process was controlled by lateral flow of hot and soft materials within the lower crust because of slab dehydration and melted mantle upwelling above the subducted plates during the southward Tethyan ocean-continent transition processes or asthenosphere diapirism. Intraplate orogeny and basin formation were irrelevant to plate collision. The Qinghai-Tibet Plateau as a whole was actually formed by the isostatic mountain building processes since 3.6 Ma that were characterized by crust-scale vertical movement, and integral rapid uplift of the plateau, accompanied by isostatic subsidence of peripheral basins and depressions, and great changes in topography and environment. A series of pulsative mountain building events, associated with gravity equilibrium and isostatic adjustment of crustal materials, at 3.6 Ma, 2.5 Ma, 1.8-1.2 Ma, 0.9-0.8 Ma and 0.15-0.12 Ma led to the formation of a composite orogenic belt by unifying the originally relatively independent Himalayas, Gangdise, Tanghla, Longmenshan, Kunlun, Altyn Tagh, and Qilian mountains, and the formation of the complete Qinghai-Tibet Plateau with a unified mountain root after Miocene uplift of the plateau as a whole.
文摘Almost all intraplate caprocks experienced strong deformation during the convergence of microplates, and then disintegrated into many secondary geologic units with the special characters, such as irregular boundaries and particular structural assemblages. In order to understand the formation mechanism of these special phenomena, a rheological experiment on the structural scenery of the Tongling area is carried out. The result shows that the primary regular and uniform boundaries of the Tongling area becomes irregular because of the enclosing and confinement of surrounding geological units in the process of 'compression-shearing-rotation-drag'; simultaneously, two specific 'drag depressions' developed at two opposite corners of the block. The former and the later phenomena can be regarded as a typical regional-scale rheological effect and necessary outcome of intraplate deformation respectively.
基金part of the research project"Crustmantle interactions beneath the Hangai Mountains in western Mongolia"the financial support of the DFG and the SNF,awarded through the DACH program
文摘Intraplate processes,such as continental surface uplift and intraplate volcanism,are enigmatic and the underlying mechanisms responsible are not fully understood.Central Mongolia is an ideal natural laboratory for studying such processes because of its location in the continental interior far from tectonic plate boundaries.
文摘In this paper we carried out an investigation about the possible causes for the enhancement of earthquakes in USA the last seven years. Our statistical and physical models indicated that the increased evolution of events in the country depends from the human actions. For further analysis we divided the country into three main seismological regions: western, central and, eastern. We roughly classified the areas by their thickness of Earth’s crust in a variation 25-45-25 km. The thickest area is in the mid-continent and most of this region are part of the Great Plains. In our study we are going to investigate the reason for the Mississippi Lime in Oklahoma a very thick area, started an unusual earthquake activity since 2010, most at Oklahoma/Kansas border. In this region also there are many anthropogenic activities concerning with the waste water wells and more than 4000 of them are active in the state. Wastewater disposal wells typically operate for longer duration and inject much more fluid than hydraulic fracturing, making them more likely to induce earthquakes. Enhanced oil recovery injects fluid into rock layers where oil and gas have already been extracted, while wastewater injection often occurs in never-before-touched rocks. Therefore, wastewater injection can raise pressure levels more than enhanced oil recovery, and thus increases the likelihood of induced earthquakes. Most injection wells do not trigger felt earthquakes. A combination of many factors is necessary for injection to induce felt earthquakes. These include the injection rate and total volume injected;the presence of faults or unknown fractures that are large enough to produce felt earthquakes;stresses that are large enough to produce earthquakes;and the presence of pathways for the fluid pressure to travel from the injection point to faults. Finally other causes of human action triggering earthquakes fluid injection, hydraulic fracturing, enhanced oil recovery, mining, nuclear explosions, some of them will be mentioned and investigated in this paper. We also intend to explain why not all the waste wells are triggering earthquakes and how it would be strongly attached to the unevenness of the Earth’s crust.
文摘In this paper,the data of vertical crustal deformations associated with the Xingtai,Haicheng,Tangshan and Datong strong earthquakes in North China Block have been processed,analyzed and studied.The result shows that the seismogenic processes of strong earthquakes are accompanied by an evolution of crustal deformation as follows: ① The area of crustal deformation anomaly should be large in radius and extensive in range. ② There are both the 'field' and 'source' of crustal deformation anomaly,with the 'source' existing inside the'field' but differing from the 'field' distinctly. ③ The evolution process includes a number of steps.Firstly, movements in the 'field region transform from the normal state to an anomalous state to start the formation of field precursors.Secondly,movements in the 'source' region become outstandingly remarkable. Thirdly,anomalies in the 'field' region that surrounds the 'source' become increasingly intense.Fourthly,the 'source' region enters a state of immobilized-movement.Finally,an earthquake occurs. ④ There are usually one or more areas where the anomaly field forms a special pattern,mostly a four-quadrant distribution.The area which is'activated' first but becomes 'immobilized' afterwards often coincides with the source area.⑤ The appearance of an obviously immobilized area inside the obviously activated area is a precursory feature which suggests that an earthquake is impending.⑥ The longer the duration of immobilized-movement,the higher the magnitude of earthquake would be.The above might be the basic mode of vertical crustal deformation during the seismogenic process of strong intraplate earthquakes.
基金jointly supported by China National Natural Science Foundation(Grant No.40074020)by a special fund(Grant No.40242004).
文摘We used matched filter, spectrum analysis, and continuation methods of potential field for data processing and obtained the geomagnetic field distribution about the continent and continental margin in southeast China. On the basis of grid data, inversion was conducted and magnetic field distribution and magnetic structure on bedding of different depths were obtained. The new results show that: 1. The magnetic field characteristics are largely different in horizontal and vertical directions and they can be divided into zones according to the continental blocks of Yangtze, Cathaysia, Kangdian (Sichuan-Yunnan) and Qinling-Dabie. 2. The Tanlu fault extends southward along the Ganjiang fault and the Wuchuan-Sihui fault after it crossed over the Yangtze River and was offset locally in the east-west direction. The Tanlu fault finally slips into the South China Sea at Hainan Island. 3. The boundary between Yangtze and Cathaysia blocks starts from Hangzhou Bay in the east, extends along Jiangshao fault and passes through Nanchang, Changsha, and Guilin, and finally enters the sea at Qinzhou, Guangxi. 4. The distribution of buried structure zone is located at 24.5°-26° N.
基金Natural Science Foundation of Shandong Province (Y2002E01) and Joint Seismological Science Foundation of China (106085).
文摘This paper analyzes the multifractal characteristics of spatio-temporal distribution of generalized strain release of earthquakes （GSRE） occurred in the eastern and western Chinese mainland （as an instance of intraplate region）, Taiwan region and New Zealand （as an instance of interplate region）. The results show that the multifractal characteristics of GSRE are closely related to the geodynamic environment. For the temporal distribution of strong events, the clustering feature is more evident in the interplate regions than that in the intraplate regions, while for small and moderate events, this difference is ambiguous. For the spatial distribution of strong earthquakes, the clustering feature is usually clearer in the intraplate regions than that in the interplate regions, while for small and moderate events, the case is just opposite.
文摘In this contribution,detailed field descriptions together with petrographic and bulk-rock major,trace and rare earth elements(REE)data are used to constrain the origin and geodynamic setting of the mafic magmatic enclaves(MMEs)recently discovered within the Pan-African Ngaoundal pluton,Adamawa area,central Cameroon.The investigated MMEs are dark-colored with chilled margins,and display medium to coarse-grain igneous textures.The mineral assemblage is either dominated by K-feldspar and carbonate(group Ⅰ),or by amphibole and plagioclase(group Ⅱ),though the overall mineral phases made of amphibole,plagioclase,K-feldspar,and biotite are similar to that of their host syenite but in different proportions.The MMEs in Ngaoundal area are foid-gabbro in composition with SiO_(2) contents ranging between 41.52% and 43.74% and are contiguous with their host granitoids of intermediate composition(SiO_(2)=57.52% to 58.98%).The host granitoid rocks are metaluminous,and belong to the shoshonitic series.Petrographic and geochemical data have revealed that the Ngaoundal MMEs derived from rapid cooling of hot injected lithospheric mantle-derived magma within cooler host granitoids magma and were emplaced in the intraplate geodynamic setting.
基金This work is supported by the National Climbing Project of China (No. 970231003), the National Important Basic Research Project (No.G1998040703) the Major Project for Basic Research of the Chinese Academy of Sciences (No. KJ951-1-304) the Scientific
文摘The definition of an 'intraplate fixed' frame remains a significant error source for crustal motion studies at a few millimeters per year level. An appropriate implementation of such a frame is very important to avoid biased velocities and to confirm a valid geophysical interpretation. Here, we establish the newest global plate motion model of ITRF2000VEL and research the definition of an Asian-fixed frame in Asia using the ITRF2000 velocity field. By X2 and F ratio tests, we find a subset site in Asia that satisfies a rigid cap rotation with residual velocities <0. 95 mm/a and provide a stable Asia reference frame (SARF). In this reference frame, we find residual velocities at Asiatic ITRF2000 sites that are consistent with known active tectonic feature. An important result of this study is the identification of internal deformation of the order of 1-2 mm/a in an area usually interpreted as 'stable' Asia. These results should be further checked as newer, denser and more accurate space geodetic data sets with longer observation time span, which become available for Asia.
文摘Intraplate volcanism was widespread in southeastern Queensland during the mid Cenozoic,leaving a legacy of variably eroded volcanoes and rugged topography known locally as“The Scenic Rim”.These plume-derived volcanoes provide a detailed record of northward Australian plate velocity,and indicate a major slowdown commencing at 26 Ma and persisting until 23 Ma,correlated with initial collision of the massive Ontong Java plateau with the northern subduction margin of the Australian plate.Despite traversing over 36 km of continental crust,trace element and isotopic signatures indicate little or only minor contamination for most units,with the exception of rhyolites formed during the period of slow plate velocity.Nevertheless,the thick continental crust allowed magmas to stall and fractionate during ascent,often producing highly evolved rocks(e.g.,comendites)containing extreme concentrations of incompatible elements,including>2000 ppm Zr.Meanwhile,isotopic and trace element results from mafic units are consistent with melting and mixing of depleted upper mantle and an EM1-like source.Alkaline mafic eruptions also often contain abundant upper mantle and lower crustal xenoliths,providing excellent samples of these otherwise inaccessible regions.Denudation has produced good exposures of the subsurface magmatic architecture,a variety of landscapes,and diverse wildlife habitats;as a result many of the volcanoes are contained in National Parks,including the World Heritage listed Gondwana Rainforests of Australia.
文摘Intraplate structural deformation is diagnostic of tectonic stress regime changes linked to plate interactions and can result from superposed tectonic events whose single contributions are hardly distinguishable.In this paper,we present a set of integrated thermochronologic inverse models along a 140 km-long transect across the central Greater Caucasus and the adjacent Adjara-Trialeti fold-and-thrust belt of Georgia,two intraplate orogens produced by structural inversion of parallel continental rift zones located on the Eurasian plate.Our dataset allows to distinguish discrete and superposed deformation episodes and quantify their respective contributions to orogenic exhumation.The integration of(U-Th)/He analysis on apatite and zircon,fission-track analysis on apatite,and peak-temperature determinations(clay mineralogy,organic matter petrography,Raman spectroscopy)shows that structural inversion was punctuated by two incremental steps starting respectively in the latest Cretaceous and the mid-Miocene.Latest Cretaceous partial inversion of the Greater Caucasus is documented here for the first time and placed in a geographically wider context of coeval deformation.The two episodes of intraplate structural inversion,exhumation,and sediment generation are chronologically and physically correlated with docking of(i)the Anatolide-Tauride-Armenian terrane(Late Cretaceous-Paleocene)and(ii)Arabia(Miocene hard collision)against the southern Eurasian plate margin.Intraplate deformation in the Caucasian domain was triggered by far-field propagation of plate-margin collisional stress which focused preferentially along rheologically weak rift zones.
基金supported by the Chinese Academy of Sciences(Grant No.XDB18000000)the National Natural Science Foundation of China(Grant No.41688103)the State Oceanography Bureau(Grant No.GASI-GEOGE-02)
文摘The roles of subduction of the Pacific plate and the big mantle wedge(BMW) in the evolution of east Asian continental margin have attracted lots of attention in past years. This paper reviews recent progresses regarding the composition and chemical heterogeneity of the BMW beneath eastern Asia and geochemistry of Cenozoic basalts in the region, with attempts to put forward a general model accounting for the generation of intraplate magma in a BMW system. Some key points of this review are summarized in the following.(1) Cenozoic basalts from eastern China are interpreted as a mixture of high-Si melts and low-Si melts. Wherever they are from, northeast, north or south China, Cenozoic basalts share a common low-Si basalt endmember, which is characterized by high alkali, Fe_2O_3~T and TiO_2 contents, HIMU-like trace element composition and relatively low ^(206)Pb/^(204)Pb compared to classic HIMU basalts. Their Nd-Hf isotopic compositions resemble that of Pacific Mantle domain and their source is composed of carbonated eclogites and peridotites. The high-Si basalt endmember is characterized by low alkali, Fe_2O_3~T and TiO_2 contents, Indian Mantle-type Pb-Nd-Hf isotopic compositions, and a predominant garnet pyroxenitic source. High-Si basalts show isotopic provinciality, with those from North China and South China displaying EM1-type and EM2-type components, respectively, while basalts from Northeast China containing both EM1-and EM2-type components.(2) The source of Cenozoic basalts from eastern China contains abundant recycled materials, including oceanic crust and lithospheric mantle components as well as carbonate sediments and water. According to their spatial distribution and deep seismic tomography, it is inferred that the recycled components are mostly from stagnant slabs in the mantle transition zone,whereas EM1 and EM2 components are from the shallow mantle.(3) Comparison of solidi of garnet pyroxenite, carbonated eclogite and peridotite with regional geotherm constrains the initial melting depth of high-Si and low-Si basalts at <100 km and^300 km, respectively. It is suggested that the BMW under eastern Asia is vertically heterogeneous, with the upper part containing EM1 and EM2 components and isotopically resembling the Indian mantle domain, whereas the lower part containing components derived from the Pacific mantle domain. Contents of H_2O and CO_2 decrease gradually from bottom to top of the BMW.(4) Melting of the BMW to generate Cenozoic intraplate basalts is triggered by decarbonization and dehydration of the slabs stagnated in the mantle transition zone.
基金This research was supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant(no.20212010200020)the Energy&Mineral Resources Develop-ment Association of Korea(EMRD)grant(Datascience based oil/gas exploration consortium),funded by the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea.
文摘Transpression occurs in response to oblique convergence across a deformation zone in intraplate regions and plate boundaries.The Korean Peninsula is located at an intraplate region of the eastern Eurasian Plate and has been deformed under the ENE–WSW maximum horizontal compression since the late Pliocene.In this study,we analyzed short-term instrumental seismic(focal mechanism)and long-term paleoseis-mic(Quaternary fault outcrop)data to decipher the neotectonic crustal deformation pattern in the south-eastern Korean Peninsula.Available(paleo-)seismic data acquired from an NNE–SSW trending deformation zone between the Yangsan and Ulleung fault zones indicate spatial partitioning of crustal deformation by NNW–SSE to NNE–SSW striking reverse faults and NNE–SSW striking strike-slip faults,supporting a strike-slip partitioned transpression model.The instantaneous and finite neotectonic strains,estimated from the focal mechanism and Quaternary outcrop data,respectively,show discrepan-cies in their axes,which can be attributed to the switching between extensional and intermediate axes of finite strain during the accumulation of wrench-dominated transpression.Notably,some major faults,including the Yangsan and Ulsan fault zones,are relatively misoriented to slip under the current stress condition but,paradoxically,have more(paleo-)seismic records indicating their role in accommodating the neotectonic transpressional strain.We propose that fluids,heat flow,and lithospheric structure are potential factors affecting the reactivation of the relatively misoriented major faults.Our findings provide insights into the accommodation pattern of strain associated with the neotectonic crustal extrusion in an intraplate region of the eastern Eurasian Plate in response to the collision of the Indian Plate and the sub-duction of the Pacific/Philippine Sea Plates.
