Based on previous research results, this paper investigated the influence of fracture morphology on mechanical properties and failure modes of rock mass with two diagonal intersected fractures. This study carried out ...Based on previous research results, this paper investigated the influence of fracture morphology on mechanical properties and failure modes of rock mass with two diagonal intersected fractures. This study carried out a series of triaxial compression tests on rock-like specimens with two crossed fractures under negative temperature, concluded the following conclusions. The strength and failure modes of rock mass are significantly influenced by the dips of two crossed fractures. The strength of rock mass with two frac- tures cannot simply be estimated using the method that was developed for the rock mass with a single fracture. When the intersecting angle is less than 30~, the failure plane initiates at the tip of ＂artificial rup- tures＂ and extends to the upper and lower ends of the specimen. In case of a higher dip and intersecting angle ranging from 30° to 60°, the failure plane propagates along one of these two fractures. The mechan- lca! parameters of rock mass are not only related to the trace length, but also depend on the trace !ength ratio. One could roughly calculate the strength parameters using the approximation proposed in.this paper..For the rock mass with a trace length ratio 〈0.3 （short trace length/long trace length）, the failure mode is dependent on the fracture with a longer trace length. When the trace length becomes significant and the trace length ratio approximates to 1, the failure plane propagates along two fractures, where an X-shaped.failure pattern is presented： For the rock mass with moderate frac!ures and a trace length ratio of approxlmately 1, the failure mode Is.Independent on fractures, which is simllar to .the damage pattern of intact rock. The strength, and elastic .modulus of rock mass decrease with the increase of spacing between fractures, whl!e Polsson＇s ratio is Independent on the spacing. The failure mode can be deter- mined by the area. of triangle created by two fractures. Damage occurs at the smaller triangle area first, and propagates with the two sides of the larger triangle.展开更多
To study the penetration mechanism of cement-based slurry in intersected fractures during grouting and the related pressure distribution,we have used two different variants of cement,namely,basic cement slurry and fas...To study the penetration mechanism of cement-based slurry in intersected fractures during grouting and the related pressure distribution,we have used two different variants of cement,namely,basic cement slurry and fast-setting cement slurry.The influence of a retarder,time-varying viscosity,fracture width and location of injection hole is also considered.A finite element software is used to implement two and three-dimensional numerical models for grouting of intersected fractures in hydrostatic conditions.Results show that there are significant differences in the diffusion morphology and pressure distribution depending on the considered cement slurry.Retarder can effectively slow down the rising rate of injection pressure and extend the diffusion distance of grout.The influence of the branch fracture is more important when basic cement slurry is considered,indicating that the change of grout pressure is correlated with the slurry viscosity.The faster the viscosity increases,the less evident is the effect.展开更多
In order to verify the flow interference at the fracture intersections, a group of hydraulic simulations of crossing flow was carried out. The manifold interference effects at the intersection of fractures on water fl...In order to verify the flow interference at the fracture intersections, a group of hydraulic simulations of crossing flow was carried out. The manifold interference effects at the intersection of fractures on water flow has been confirmed extensively either in the normal or in the oblique intersected tubes as well as in the intersected tubes of either equal or variant diameters. Consequently, suggest that the fissure network can no longer be taken as a set of solitary fractures, but as a set of elementary intersected fractures. The deflection effect at fracture intersections on the water flow should be taken into consideration when is dealt with any theory related to the water migration in fractures.展开更多
Numerous intersected rock fractures constitute the fracture network in enhanced geothermal systems.The complicated convective heat transfer behavior in intersected fractures is critical to the heat recovery in fractur...Numerous intersected rock fractures constitute the fracture network in enhanced geothermal systems.The complicated convective heat transfer behavior in intersected fractures is critical to the heat recovery in fractured geothermal reservoirs.A series of three-dimensional intersected fracture models is constructed to perform the flow-through heat transfer simulations.The geometry effects of dead-end fractures(DEFs)on the heat transfer are evaluated in terms of intersected angles,apertures,lengths,and the connectivity.The results indicate that annular streamlines appear in the rough DEF and cause an ellipse distribution of the cold front.Compared to plate DEFs,the fluid flow in the rough DEF enhances the heat transfer.Both the increment of outlet water temperatureΔToutand the ratio of heat production Qrpresent the largest at the intersected angle of 90°while decline with the decrease of the intersected angle between the main flow fracture(MFF)and the DEFs.The extension of the length of intersected DEFs is beneficial to heat production while enhancing its aperture is not needed.Solely increasing the number of intersected DEFs induces a little increase of heat extraction,and more significant heat production can be obtained through connecting these DEFs with the MFF forming the flow network.展开更多
Laser-directed energy deposition(L-DED)is an advanced additive manufacturing technology primarily adopted in metal three-dimensional printing systems.The L-DED process is characterized by various defects,thus necessit...Laser-directed energy deposition(L-DED)is an advanced additive manufacturing technology primarily adopted in metal three-dimensional printing systems.The L-DED process is characterized by various defects,thus necessitating the extensive use of in-situ monitoring to enable real-time adjustments of process parameters by detecting molten-pool features.To address the challenge of accurately extracting the molten-pool morphology from an undetached spatter,an innovative monitoring method based on the U-Net(U-shaped network)is proposed herein.A lightweight architecture accelerates the processing speed,whereas an enhanced loss function incorporating weight maps augments the segmentation precision.The model performance is evaluated by comparing its segmentation accuracy and processing speed with those of the conventional U-Net,using the mean intersection over union(MIoU)as the segmentation metric.The improved model demonstrates superior segmentation accuracy at the interface between the molten pool and spatter,with a peak MIoU of 0.9798 achieved on the test set.Furthermore,this model processes each image in an extremely short time of 17.9 ms.Using this segmentation algorithm,the error in extracting the molten-pool width from single-track experiments is within 0.1 mm.The proposed method for monitoring the molten-pool morphology is suitable for deployment in online monitoring systems,thus providing a foundation for subsequent process-parameter regulation.展开更多
In this paper, the problem of cubature Kalman fusion filtering(CKFF) is addressed for multi-sensor systems under amplify-and-forward(AaF) relays. For the purpose of facilitating data transmission, AaF relays are utili...In this paper, the problem of cubature Kalman fusion filtering(CKFF) is addressed for multi-sensor systems under amplify-and-forward(AaF) relays. For the purpose of facilitating data transmission, AaF relays are utilized to regulate signal communication between sensors and filters. Here, the randomly varying channel parameters are represented by a set of stochastic variables whose occurring probabilities are permitted to exhibit bounded uncertainty. Employing the spherical-radial cubature principle, a local filter under AaF relays is initially constructed. This construction ensures and minimizes an upper bound of the filtering error covariance by designing an appropriate filter gain. Subsequently, the local filters are fused through the application of the covariance intersection fusion rule. Furthermore, the uniform boundedness of the filtering error covariance's upper bound is investigated through establishing certain sufficient conditions. The effectiveness of the proposed CKFF scheme is ultimately validated via a simulation experiment concentrating on a three-phase induction machine.展开更多
This article explores the intersections of Buddhism,Daoism,and contemporary French literary practice in the study of the everyday(quotidien).Since the 1980s,French literature has increasingly shifted its focus from th...This article explores the intersections of Buddhism,Daoism,and contemporary French literary practice in the study of the everyday(quotidien).Since the 1980s,French literature has increasingly shifted its focus from the exotic to the mundane,engaging with theoretical frameworks developed by scholars such as Henri Lefebvre and Michel de Certeau.Drawing on Buddhist notions of emptiness and dependent arising,as well as Daoist principles of yin-yang interdependence,the article bridges Eastern and Western philosophies to demonstrate the everyday not as a static or trivial backdrop,but as a dynamic and transformative space.It further examines how representations of daily life in the works of Georges Perec and Jacques Roubaud employ the meticulous documentation of mundane details to uncover hidden patterns,rhythms,and structures of human experience.Through literary fieldwork,Perec and Roubaud challenge conventional perceptions of the everyday,unveiling its depth,complexity,and potential for reinvention.展开更多
The cultivated peanut(Arachis hypogaea L.)is a significant edible oilseed crop.Although substantial progress has been made in breeding new peanut varieties through conventional methods,the narrow gene base of the cult...The cultivated peanut(Arachis hypogaea L.)is a significant edible oilseed crop.Although substantial progress has been made in breeding new peanut varieties through conventional methods,the narrow gene base of the cultivated peanut(stemming from six evolutionary bottlenecks)poses growing challenges for developing breakthrough varieties via intraspecific hybridization alone.Consequently,extensive efforts have been directed towards the utilization of incompatible wild Arachis species.In this study,we present the first genetic diversity assessment of 30 progenies derived from intersectional crosses between the high-oleic peanut cultivar Huayu 665 and two wild species,A.paraguariensis and A.appresipilla,alongside 32 cultivated materials and 29 wild accessions,using transposon element markers.The hybrids demonstrated greater genetic diversity than the cultivars,expanding the gene base for peanut breeding.Hybrid progenies with enhanced insect pest resistance and elevated levels of both oleic acid and oil/protein content were tentatively obtained.This work lays the groundwork for the future development of high-yielding,high-quality peanut varieties through the utilization of crop wild relatives.展开更多
Background: Wrist pain is prevalent. Activities such as dexterous sports, prolonged use of personal handheld devices, and extensive desktop keyboard usage are common contributors to wrist pain. Intersection syndrome, ...Background: Wrist pain is prevalent. Activities such as dexterous sports, prolonged use of personal handheld devices, and extensive desktop keyboard usage are common contributors to wrist pain. Intersection syndrome, a form of inflammatory tenosynovitis, occurs at the intersection of the first and second dorsal compartments of the wrist. The first dorsal compartment is comprised of the tendons of abductor pollicis longus and extensor pollicis brevis, while the second dorsal compartment contains the tendons of extensor carpi radialis longus and extensor carpi radialis brevis. Intersection syndrome is diagnosed by pain localized to the dorsoradial forearm, approximately five cm proximal to the wrist joint, which worsens with resisted wrist and thumb extension. To date, the use of hydro dissection with 5% dextrose under ultrasound guidance as a treatment for Intersection syndrome has not been reported. This case report presents the first report on ultrasound-guided hydro dissection as a therapeutic approach for intersection syndrome. Methods: A case report, with informed consent, involving a 32-year-old male athlete. The patient, a hurling player, presented with chronic right wrist pain diagnosed as intersection syndrome. The condition significantly affected his work, sporting activities, and daily living activities. Previous conservative management and physiotherapy had failed to alleviate his symptoms. To confirm the diagnosis, relevant imaging was performed, supplemented by dynamic ultrasound assessment. The procedure was performed aseptically. Continuous ultrasound guidance was employed to ensure accurate needle placement. Once the needle tip position was confirmed, an initial injection of 5 mL of 0.25% chirocaine was administered. 10 mL of 5% dextrose was injected under ultrasound guidance for hydro dissection, with good visualization of the solution’s distribution. Conclusion: Ultrasound-guided hydro dissection has not previously been documented as a treatment option for intersection syndrome. In this case, it proved to be an effective pain-relieving therapy with sustained effect at three-month clinical follow-up. Further studies are required.展开更多
To accurately analyze proppant transport in rough intersecting fractures and elucidate the interaction mechanisms among liquid,particles,and rough walls,this study reconstructed a numerical model of fractures in inhom...To accurately analyze proppant transport in rough intersecting fractures and elucidate the interaction mechanisms among liquid,particles,and rough walls,this study reconstructed a numerical model of fractures in inhomogeneous reservoirs with varying brittleness index(BI).Various auto-correlation Gaussian rough fracture models were created using Matlab to assess roughness through the fractal dimension method.This research innovatively combined Boolean operations to establish three-dimensional rough fracture models,incorporating(Computational Fluid Dynamics)CFD-DEM(Discrete Element Method)with a bidirectional method for cosimulation.The proppant transport in fractures was categorized into three zones based on the difference in the turbulent kinetic energy.Artificially induced fracture roughness increases fluid retention and turbulence,causing plugging effects and limiting proppant flow into branch fractures.Additionally,compared with the superior deposition and significant support effects of the spherical proppant,the low-sphericity proppant traveled farther under fracturing fluid,inducing more pronounced plugging near curved fracture intersections;the variation in fracture intersection angles primarily impacted the wall shear stress within the flow field,indicating smaller angles led to higher shear energy at the intersection.Compared with the intersection angle of 30°,the height and area deposited in the 90 branch fracture increased by 52.25%and 65.33%,respectively:notably,injecting proppant from smaller to larger particles(S:M:L)and a low velocity effectively ensured fracture conductivity near the wellbore at joint roughness coefficient(JRC)≥46 while achieving satis-factory placement in the branch fracture,making it a recommended approach.展开更多
Introduction Gender and sex are related to important quality and safety issues in scientific,health,and clinical research.Sex refers to biological characteristics,while gender encompasses the sociocultural norms,ident...Introduction Gender and sex are related to important quality and safety issues in scientific,health,and clinical research.Sex refers to biological characteristics,while gender encompasses the sociocultural norms,identities,and relationships that shape communities and organizations,as well as influence actions,behaviors,contexts,and knowledge.Both gender and sex intersect with other social categories.In this context,in addition to sex or gender,the intersectionality refers to overlapping or interdependent systems of discrimination by more than one factor,such as age,disability,ethnicity,geographic location,socioeconomic status,and sexuality,among others.展开更多
Most data centers currently tap into existing power grids to draw the immense amount of electricity they need to operate.But many of the data centers that Google(Mountain View,CA,USA)plans to open in the next few year...Most data centers currently tap into existing power grids to draw the immense amount of electricity they need to operate.But many of the data centers that Google(Mountain View,CA,USA)plans to open in the next few years will boast their own power plants,an arrangement known as colocation[1].Under an agreement announced in December 2024,the company will site data centers in industrial parks where its partner Intersect Power of Houston,TX,USA,has installed clean power facilities[1,2].The first of these complexes is scheduled to come online in 2026[1].展开更多
Eco-driving has always been an ongoing topic.In urban driving conditions,traffic regulations,other vehicle behaviors,and special driving scenarios will have a major impact on the energy consumption of autonomous vehic...Eco-driving has always been an ongoing topic.In urban driving conditions,traffic regulations,other vehicle behaviors,and special driving scenarios will have a major impact on the energy consumption of autonomous vehicles.As a representative algorithm of artificial intelligence,reinforcement learning has the ability to perform well under complex tasks.This paper uses deep reinforcement learning algorithms to design the economical driving strategies of autonomous vehicles in three driving scenarios:driving at signalized intersection under free traffic flow,car-following on ramps,and driving at signalized intersection considering queue effects.In the above three driving scenarios,the driving strategy proposed in this paper achieves economical driving performance while satisfying the driving scenario requirements.展开更多
In the next few years traffic will happen most of the time.This was triggered by the growing rate of vehicles against the road capacity which is not balance.All the time the congestion in the city of Semarang has occu...In the next few years traffic will happen most of the time.This was triggered by the growing rate of vehicles against the road capacity which is not balance.All the time the congestion in the city of Semarang has occured at peak hours.Congestion also occured in between Teuku Umar and Setia Budi road Jatingaleh because of a plot intersection(Kesatrian intersection,PLN intersection and Jatingaleh intersection)with the Toll Road.Jatingaleh is located in the southern city of Semarang which is a central meeting point between the upper and lower Semarang where the vehicle flows in through a combination of local current and regional traffic,and the flow of vehicles coming in and out from highway.The main cause of the problems that occurred in the area of Jatingaleh is due to the numbers of vehicles movement that occurs at the intersections.With the above issues,it is necessary to analyse the existing conditions and look into some solutions.Before carrying out an analysis a field surveys at peak hours for example morning(06:00 to 08:00 am)and for the afternoon(04:00 to 06:00 pm)should be conducted,then the number of vehicles is counted manually with“short-breakcounting”according to types of vehicles.From the analysis we found that the degree of saturation(DS)is 1.61 between Teuku Umar and Setia Budi road during the morning peak hours and 1.56 during the afternoon peak hours.This means that the capacity of the existing road is no longer able to accommodate the traffic flow.One of the solutions for the congestion that occurs at the intersection of Jatingaleh is to apply the efficiency of the intersection that is not in a plot with a Fly over,Underpass and the combination of Fly Over-Underpass.Base on the flow reduction calculation with 3 comparative modeling it shows that the Fly Over is the most technically efficient to be applied in this research.展开更多
This psychobiographical study on Bessie Head,a bi-racial writer from the South African apartheid period,explored early experiences that defined her identity,personality development and prominence in post-colonial Afri...This psychobiographical study on Bessie Head,a bi-racial writer from the South African apartheid period,explored early experiences that defined her identity,personality development and prominence in post-colonial African literature.For the case conceptual framing,we integrate Donald W.Winnicott’s object relations theory with intersectional feminism to explore her identity by the complex interactions between her psychological experiences and socio-political contexts.Our mixed-methodological approach that combines du Plessis’(2017)structured framework and Knight’s(2019)Phenomenological-hermeneutic Life-narrative Analysis.The analysis revealed three central findings.First,Bessie’s identity development was shaped by early abandonment and racial liminality,resulting in a fragmented sense of self.Second,her emotional and psychological instability was compounded by intersecting experiences of racism,sexism,and exile.Third,her writing and relationships functioned as coping mechanisms and transitional phenomena,offering potential spaces of psychological resilience.From this psychobiographical study framed on intersectional research,the evidence suggests that marginalized identities and a commitment to social justice are revealed by exploring the relationships between individual psychology and systemic influences.展开更多
Currently,the design of advanced compressor blades has reached the full ThreeDimensional(3D)modeling stage.When analyzing the reasons for the failure of popular corner stall prediction criteria for axial compressors t...Currently,the design of advanced compressor blades has reached the full ThreeDimensional(3D)modeling stage.When analyzing the reasons for the failure of popular corner stall prediction criteria for axial compressors to predict the corner flow state in modern compressor3D blades with end-bend and composite bend-sweep characteristics,it is believed that,in addition to the dihedral angle factor in the corner,the variation of the dihedral angle along the flow path is an important factor that has not been considered to date.In light of this,this study first uses the characteristic effects of the diffuser on the deceleration and pressure increase in airflow to design a series of physical models of varying dihedral angle diffusers that are equivalent to compressors.Based on these models,a quantization parameter is established to characterize the development speed of the intersection of boundary layers at the corner under varying dihedral angle and adverse pressure gradient conditions.After combining this with the effects of secondary flow,a Modified diffusion factor DJ(MDJ)is developed to describe the development of corner flow from the leading edge of the blade to its trailing edge under varying dihedral angle conditions.Finally,based on a compressor cascade database,an improved criterion for predicting corner stall in axial compressors using the MDJ diffusion factor is proposed.The validation results,based on extensive experimental data of compressor blades,reveal that this improved criterion can significantly enhance the accuracy of corner stall predictions in the 3D blades of modern compressors compared to currently used prediction criteria,by taking into account the effects of variations in the dihedral angle.展开更多
The intersection is a widely used traffic line structure from the shallow tunnel to the deep roadway,and determining the subsidence hidden danger area of the roof is the key to its stability control.However,applying t...The intersection is a widely used traffic line structure from the shallow tunnel to the deep roadway,and determining the subsidence hidden danger area of the roof is the key to its stability control.However,applying traditional maximum equivalent span beam(MESB)theory to determine deformation range,peak point,and angle influence poses a challenge.Considering the overall structure of the intersection roof,the maximum equivalent triangular plate(METP)theory is proposed,and its geometric parameter calculation formula and deflection calculation formula are obtained.The application of the two theories in 18 models with different intersection angles,roadway types,and surrounding rock lithology is verified by numerical analysis.The results show that:1)The METP structure of the intersection roof established by the simulation results of each model successfully determined the location of the roof’s high displacement zone;2)The area comparison method of the METP theory can be reasonably explained:①The roof subsidence of the intersection decreases with the increase of the intersection angle;②The roof subsidence at the intersection of different roadway types has a rectangular type>arch type>circular type;③The roof subsidence of the intersection with weak surrounding rock is significantly larger than that of the intersection with hard surrounding rock.According to the application results of the two theories,the four advantages of the METP theory are compared and clarified in the basic assumptions,mechanical models,main viewpoints,and mechanism analysis.The large deformation inducement of the intersection roof is then explored.The J 2 peak area of the roof drives the large deformation of the area,the peak point of which is consistent with the center of gravity position of the METP.Furthermore,the change in the range of this peak is consistent with the change law of the METP’s area.Hence,this theory clarifies the large deformation area of the intersection roof,which provides a clear guiding basis for its initial support design,mid-term monitoring,and late local reinforcement.展开更多
We constructed a new set of diabatic poten-tial energy surfaces(PESs)for the two low-est states involved in Li+Li_(2)reaction by us-ing the fundamental-invariant neural net-work method.The Li_(3)system exhibits a coni...We constructed a new set of diabatic poten-tial energy surfaces(PESs)for the two low-est states involved in Li+Li_(2)reaction by us-ing the fundamental-invariant neural net-work method.The Li_(3)system exhibits a coni-cal intersection(CI)at the geometric D_(3)h symmetries with the energy of the CI point significantly lower than the ground-state en-ab initio ergy of the diatomic molecule.The diabaitc PESs accurately reproduce adiabatic en-ergies,derivative coupling,and energy gradient information,thereby providing a high-fideli-ty description of the CI between the two lowest electronic states.Quantum dynamical calcu-lations have revealed significant non-adiabatic effects in the Li+Li_(2)reaction.展开更多
At a time when humanity grapples with intersecting deficits in peace,development,security and governance,civilizations stand at a crossroads.As traditional Western-led solutions falter,China’s Global Civilization Ini...At a time when humanity grapples with intersecting deficits in peace,development,security and governance,civilizations stand at a crossroads.As traditional Western-led solutions falter,China’s Global Civilization Initiative(GCI)emerges as a transformative framework,translating historical wisdom into actionable strategies.Recent forums like the 11th Nishan Forum on World Civilizations and the Global Civilizations Dialogue Ministerial Meeting underscore growing consensus on core principles:equality,mutual learning,inclusive dialogue,and collaborative response to global challenges.As Chinese President Xi Jinping pointed out in his congratulatory letter to the Global Civilizations Dialogue Ministerial Meeting,“History shows that exchanges and mutual learning among civilizations are essential for civilizations to flourish and for human progress to be made.”展开更多
Light-induced conical intersections(LICIs)present a distinctive mechanism for nonadiabatic coupling,thereby facilitating ultrafast chemical reactions,including the indirect photodissociation of diatomic molecules.In c...Light-induced conical intersections(LICIs)present a distinctive mechanism for nonadiabatic coupling,thereby facilitating ultrafast chemical reactions,including the indirect photodissociation of diatomic molecules.In contrast to static conical intersections,LICIs are dynamically tunable,providing a pathway for precise control of molecular dissociation.In this study,we employ the time-dependent quantum wave packet method to investigate the dissociation dynamics of the OH molecule,focusing on its ground state X^(2)Πand repulsive state 1^(2)Σ~-.By varying laser field parameters(intensity,full width at half maximum(FWHM),and wavelength),we elucidate how nonadiabatic coupling governs selective dissociation channel control.Our findings reveal that the choice of initial vibrational states and the tailoring of laser conditions significantly influence dissociation pathways,providing theoretical insights into manipulating molecular dynamics via LICIs.These results provide a foundation for future experimental studies and the development of advanced molecular control techniques.展开更多
文摘Based on previous research results, this paper investigated the influence of fracture morphology on mechanical properties and failure modes of rock mass with two diagonal intersected fractures. This study carried out a series of triaxial compression tests on rock-like specimens with two crossed fractures under negative temperature, concluded the following conclusions. The strength and failure modes of rock mass are significantly influenced by the dips of two crossed fractures. The strength of rock mass with two frac- tures cannot simply be estimated using the method that was developed for the rock mass with a single fracture. When the intersecting angle is less than 30~, the failure plane initiates at the tip of ＂artificial rup- tures＂ and extends to the upper and lower ends of the specimen. In case of a higher dip and intersecting angle ranging from 30° to 60°, the failure plane propagates along one of these two fractures. The mechan- lca! parameters of rock mass are not only related to the trace length, but also depend on the trace !ength ratio. One could roughly calculate the strength parameters using the approximation proposed in.this paper..For the rock mass with a trace length ratio 〈0.3 （short trace length/long trace length）, the failure mode is dependent on the fracture with a longer trace length. When the trace length becomes significant and the trace length ratio approximates to 1, the failure plane propagates along two fractures, where an X-shaped.failure pattern is presented： For the rock mass with moderate frac!ures and a trace length ratio of approxlmately 1, the failure mode Is.Independent on fractures, which is simllar to .the damage pattern of intact rock. The strength, and elastic .modulus of rock mass decrease with the increase of spacing between fractures, whl!e Polsson＇s ratio is Independent on the spacing. The failure mode can be deter- mined by the area. of triangle created by two fractures. Damage occurs at the smaller triangle area first, and propagates with the two sides of the larger triangle.
基金by the Joint Funds of National Natural Science Foundation of China[Grant No.U1706223]the National Key Research and Development Project(Grant No.2016YFC0801600)+1 种基金the General Program of National Natural Science Foundation[Grant No.51779133]the General Program of Shandong Province Natural Science Foundation[Grant No.ZR2018MEE047].
文摘To study the penetration mechanism of cement-based slurry in intersected fractures during grouting and the related pressure distribution,we have used two different variants of cement,namely,basic cement slurry and fast-setting cement slurry.The influence of a retarder,time-varying viscosity,fracture width and location of injection hole is also considered.A finite element software is used to implement two and three-dimensional numerical models for grouting of intersected fractures in hydrostatic conditions.Results show that there are significant differences in the diffusion morphology and pressure distribution depending on the considered cement slurry.Retarder can effectively slow down the rising rate of injection pressure and extend the diffusion distance of grout.The influence of the branch fracture is more important when basic cement slurry is considered,indicating that the change of grout pressure is correlated with the slurry viscosity.The faster the viscosity increases,the less evident is the effect.
文摘In order to verify the flow interference at the fracture intersections, a group of hydraulic simulations of crossing flow was carried out. The manifold interference effects at the intersection of fractures on water flow has been confirmed extensively either in the normal or in the oblique intersected tubes as well as in the intersected tubes of either equal or variant diameters. Consequently, suggest that the fissure network can no longer be taken as a set of solitary fractures, but as a set of elementary intersected fractures. The deflection effect at fracture intersections on the water flow should be taken into consideration when is dealt with any theory related to the water migration in fractures.
基金financially supported by the National Key R&D Program of China(Grant No.2019YFB1504103)the China Postdoctoral Science Foundation(Grant Nos.2019TQ0174)。
文摘Numerous intersected rock fractures constitute the fracture network in enhanced geothermal systems.The complicated convective heat transfer behavior in intersected fractures is critical to the heat recovery in fractured geothermal reservoirs.A series of three-dimensional intersected fracture models is constructed to perform the flow-through heat transfer simulations.The geometry effects of dead-end fractures(DEFs)on the heat transfer are evaluated in terms of intersected angles,apertures,lengths,and the connectivity.The results indicate that annular streamlines appear in the rough DEF and cause an ellipse distribution of the cold front.Compared to plate DEFs,the fluid flow in the rough DEF enhances the heat transfer.Both the increment of outlet water temperatureΔToutand the ratio of heat production Qrpresent the largest at the intersected angle of 90°while decline with the decrease of the intersected angle between the main flow fracture(MFF)and the DEFs.The extension of the length of intersected DEFs is beneficial to heat production while enhancing its aperture is not needed.Solely increasing the number of intersected DEFs induces a little increase of heat extraction,and more significant heat production can be obtained through connecting these DEFs with the MFF forming the flow network.
基金supported by National Natural Science Foundation of China(Grant Nos.52305440,52204263)Natural Science Foundation of Changsha City(Grant Nos.kq2208272,kq2208274)+1 种基金Tribology Science Fund of the State Key Laboratory of Tribology in Advanced Equipment(Grant SKLTKF22B09)National Key Research and Development Program of China(2022YFB3706902).
文摘Laser-directed energy deposition(L-DED)is an advanced additive manufacturing technology primarily adopted in metal three-dimensional printing systems.The L-DED process is characterized by various defects,thus necessitating the extensive use of in-situ monitoring to enable real-time adjustments of process parameters by detecting molten-pool features.To address the challenge of accurately extracting the molten-pool morphology from an undetached spatter,an innovative monitoring method based on the U-Net(U-shaped network)is proposed herein.A lightweight architecture accelerates the processing speed,whereas an enhanced loss function incorporating weight maps augments the segmentation precision.The model performance is evaluated by comparing its segmentation accuracy and processing speed with those of the conventional U-Net,using the mean intersection over union(MIoU)as the segmentation metric.The improved model demonstrates superior segmentation accuracy at the interface between the molten pool and spatter,with a peak MIoU of 0.9798 achieved on the test set.Furthermore,this model processes each image in an extremely short time of 17.9 ms.Using this segmentation algorithm,the error in extracting the molten-pool width from single-track experiments is within 0.1 mm.The proposed method for monitoring the molten-pool morphology is suitable for deployment in online monitoring systems,thus providing a foundation for subsequent process-parameter regulation.
基金supported in part by the National Natural Science Foundation of China(12171124,61933007)the Natural Science Foundation of Heilongjiang Province of China(ZD2022F003)+2 种基金the National High-End Foreign Experts Recruitment Plan of China(G2023012004L)the Royal Society of UKthe Alexander von Humboldt Foundation of Germany
文摘In this paper, the problem of cubature Kalman fusion filtering(CKFF) is addressed for multi-sensor systems under amplify-and-forward(AaF) relays. For the purpose of facilitating data transmission, AaF relays are utilized to regulate signal communication between sensors and filters. Here, the randomly varying channel parameters are represented by a set of stochastic variables whose occurring probabilities are permitted to exhibit bounded uncertainty. Employing the spherical-radial cubature principle, a local filter under AaF relays is initially constructed. This construction ensures and minimizes an upper bound of the filtering error covariance by designing an appropriate filter gain. Subsequently, the local filters are fused through the application of the covariance intersection fusion rule. Furthermore, the uniform boundedness of the filtering error covariance's upper bound is investigated through establishing certain sufficient conditions. The effectiveness of the proposed CKFF scheme is ultimately validated via a simulation experiment concentrating on a three-phase induction machine.
基金funded by Sichuan International Studies University within the framework of the research project“Oulipian Experimentalism and Spatial Structure in the Travel Narratives of Jacques Roubaud”(sisu202008).
文摘This article explores the intersections of Buddhism,Daoism,and contemporary French literary practice in the study of the everyday(quotidien).Since the 1980s,French literature has increasingly shifted its focus from the exotic to the mundane,engaging with theoretical frameworks developed by scholars such as Henri Lefebvre and Michel de Certeau.Drawing on Buddhist notions of emptiness and dependent arising,as well as Daoist principles of yin-yang interdependence,the article bridges Eastern and Western philosophies to demonstrate the everyday not as a static or trivial backdrop,but as a dynamic and transformative space.It further examines how representations of daily life in the works of Georges Perec and Jacques Roubaud employ the meticulous documentation of mundane details to uncover hidden patterns,rhythms,and structures of human experience.Through literary fieldwork,Perec and Roubaud challenge conventional perceptions of the everyday,unveiling its depth,complexity,and potential for reinvention.
基金supported by Xinjiang Government under“Mining Stress Tolerant Early Maturing Peanut Genetic Resources and Breeding Processing Type Peanut Varieties in Xinjiang”(2022A02008-3)Guangdong Government under“Guangdong Program for Science&Technology Plan”(2020B020219003)+2 种基金Ministry of Agriculture&Rural Affairs,China under“China Agricultural Research System”(CARS-13)Shandong Academy of Agricultural Sciences under“Agricultural Science&Technology Innovation Project”(CXGC2023A06)Shandong Provincial Government under“2024 Shandong Province Major Agricultural Technology Collaborative Promotion Plan”(SDNYXTTG-2024-01).
文摘The cultivated peanut(Arachis hypogaea L.)is a significant edible oilseed crop.Although substantial progress has been made in breeding new peanut varieties through conventional methods,the narrow gene base of the cultivated peanut(stemming from six evolutionary bottlenecks)poses growing challenges for developing breakthrough varieties via intraspecific hybridization alone.Consequently,extensive efforts have been directed towards the utilization of incompatible wild Arachis species.In this study,we present the first genetic diversity assessment of 30 progenies derived from intersectional crosses between the high-oleic peanut cultivar Huayu 665 and two wild species,A.paraguariensis and A.appresipilla,alongside 32 cultivated materials and 29 wild accessions,using transposon element markers.The hybrids demonstrated greater genetic diversity than the cultivars,expanding the gene base for peanut breeding.Hybrid progenies with enhanced insect pest resistance and elevated levels of both oleic acid and oil/protein content were tentatively obtained.This work lays the groundwork for the future development of high-yielding,high-quality peanut varieties through the utilization of crop wild relatives.
文摘Background: Wrist pain is prevalent. Activities such as dexterous sports, prolonged use of personal handheld devices, and extensive desktop keyboard usage are common contributors to wrist pain. Intersection syndrome, a form of inflammatory tenosynovitis, occurs at the intersection of the first and second dorsal compartments of the wrist. The first dorsal compartment is comprised of the tendons of abductor pollicis longus and extensor pollicis brevis, while the second dorsal compartment contains the tendons of extensor carpi radialis longus and extensor carpi radialis brevis. Intersection syndrome is diagnosed by pain localized to the dorsoradial forearm, approximately five cm proximal to the wrist joint, which worsens with resisted wrist and thumb extension. To date, the use of hydro dissection with 5% dextrose under ultrasound guidance as a treatment for Intersection syndrome has not been reported. This case report presents the first report on ultrasound-guided hydro dissection as a therapeutic approach for intersection syndrome. Methods: A case report, with informed consent, involving a 32-year-old male athlete. The patient, a hurling player, presented with chronic right wrist pain diagnosed as intersection syndrome. The condition significantly affected his work, sporting activities, and daily living activities. Previous conservative management and physiotherapy had failed to alleviate his symptoms. To confirm the diagnosis, relevant imaging was performed, supplemented by dynamic ultrasound assessment. The procedure was performed aseptically. Continuous ultrasound guidance was employed to ensure accurate needle placement. Once the needle tip position was confirmed, an initial injection of 5 mL of 0.25% chirocaine was administered. 10 mL of 5% dextrose was injected under ultrasound guidance for hydro dissection, with good visualization of the solution’s distribution. Conclusion: Ultrasound-guided hydro dissection has not previously been documented as a treatment option for intersection syndrome. In this case, it proved to be an effective pain-relieving therapy with sustained effect at three-month clinical follow-up. Further studies are required.
文摘To accurately analyze proppant transport in rough intersecting fractures and elucidate the interaction mechanisms among liquid,particles,and rough walls,this study reconstructed a numerical model of fractures in inhomogeneous reservoirs with varying brittleness index(BI).Various auto-correlation Gaussian rough fracture models were created using Matlab to assess roughness through the fractal dimension method.This research innovatively combined Boolean operations to establish three-dimensional rough fracture models,incorporating(Computational Fluid Dynamics)CFD-DEM(Discrete Element Method)with a bidirectional method for cosimulation.The proppant transport in fractures was categorized into three zones based on the difference in the turbulent kinetic energy.Artificially induced fracture roughness increases fluid retention and turbulence,causing plugging effects and limiting proppant flow into branch fractures.Additionally,compared with the superior deposition and significant support effects of the spherical proppant,the low-sphericity proppant traveled farther under fracturing fluid,inducing more pronounced plugging near curved fracture intersections;the variation in fracture intersection angles primarily impacted the wall shear stress within the flow field,indicating smaller angles led to higher shear energy at the intersection.Compared with the intersection angle of 30°,the height and area deposited in the 90 branch fracture increased by 52.25%and 65.33%,respectively:notably,injecting proppant from smaller to larger particles(S:M:L)and a low velocity effectively ensured fracture conductivity near the wellbore at joint roughness coefficient(JRC)≥46 while achieving satis-factory placement in the branch fracture,making it a recommended approach.
基金funded by the European Union's Horizon 2020 Research and Innovation Programme under grant No.896932(TTV guide TX project)and grant No.824087(EOSC-Life)。
文摘Introduction Gender and sex are related to important quality and safety issues in scientific,health,and clinical research.Sex refers to biological characteristics,while gender encompasses the sociocultural norms,identities,and relationships that shape communities and organizations,as well as influence actions,behaviors,contexts,and knowledge.Both gender and sex intersect with other social categories.In this context,in addition to sex or gender,the intersectionality refers to overlapping or interdependent systems of discrimination by more than one factor,such as age,disability,ethnicity,geographic location,socioeconomic status,and sexuality,among others.
文摘Most data centers currently tap into existing power grids to draw the immense amount of electricity they need to operate.But many of the data centers that Google(Mountain View,CA,USA)plans to open in the next few years will boast their own power plants,an arrangement known as colocation[1].Under an agreement announced in December 2024,the company will site data centers in industrial parks where its partner Intersect Power of Houston,TX,USA,has installed clean power facilities[1,2].The first of these complexes is scheduled to come online in 2026[1].
基金supported in part by the National Natural Science Foundation of China under Grant No.62073152in part by the Jilin Province Science and Technology Development Plan,China under Grant No.20220201034GX.
文摘Eco-driving has always been an ongoing topic.In urban driving conditions,traffic regulations,other vehicle behaviors,and special driving scenarios will have a major impact on the energy consumption of autonomous vehicles.As a representative algorithm of artificial intelligence,reinforcement learning has the ability to perform well under complex tasks.This paper uses deep reinforcement learning algorithms to design the economical driving strategies of autonomous vehicles in three driving scenarios:driving at signalized intersection under free traffic flow,car-following on ramps,and driving at signalized intersection considering queue effects.In the above three driving scenarios,the driving strategy proposed in this paper achieves economical driving performance while satisfying the driving scenario requirements.
文摘In the next few years traffic will happen most of the time.This was triggered by the growing rate of vehicles against the road capacity which is not balance.All the time the congestion in the city of Semarang has occured at peak hours.Congestion also occured in between Teuku Umar and Setia Budi road Jatingaleh because of a plot intersection(Kesatrian intersection,PLN intersection and Jatingaleh intersection)with the Toll Road.Jatingaleh is located in the southern city of Semarang which is a central meeting point between the upper and lower Semarang where the vehicle flows in through a combination of local current and regional traffic,and the flow of vehicles coming in and out from highway.The main cause of the problems that occurred in the area of Jatingaleh is due to the numbers of vehicles movement that occurs at the intersections.With the above issues,it is necessary to analyse the existing conditions and look into some solutions.Before carrying out an analysis a field surveys at peak hours for example morning(06:00 to 08:00 am)and for the afternoon(04:00 to 06:00 pm)should be conducted,then the number of vehicles is counted manually with“short-breakcounting”according to types of vehicles.From the analysis we found that the degree of saturation(DS)is 1.61 between Teuku Umar and Setia Budi road during the morning peak hours and 1.56 during the afternoon peak hours.This means that the capacity of the existing road is no longer able to accommodate the traffic flow.One of the solutions for the congestion that occurs at the intersection of Jatingaleh is to apply the efficiency of the intersection that is not in a plot with a Fly over,Underpass and the combination of Fly Over-Underpass.Base on the flow reduction calculation with 3 comparative modeling it shows that the Fly Over is the most technically efficient to be applied in this research.
文摘This psychobiographical study on Bessie Head,a bi-racial writer from the South African apartheid period,explored early experiences that defined her identity,personality development and prominence in post-colonial African literature.For the case conceptual framing,we integrate Donald W.Winnicott’s object relations theory with intersectional feminism to explore her identity by the complex interactions between her psychological experiences and socio-political contexts.Our mixed-methodological approach that combines du Plessis’(2017)structured framework and Knight’s(2019)Phenomenological-hermeneutic Life-narrative Analysis.The analysis revealed three central findings.First,Bessie’s identity development was shaped by early abandonment and racial liminality,resulting in a fragmented sense of self.Second,her emotional and psychological instability was compounded by intersecting experiences of racism,sexism,and exile.Third,her writing and relationships functioned as coping mechanisms and transitional phenomena,offering potential spaces of psychological resilience.From this psychobiographical study framed on intersectional research,the evidence suggests that marginalized identities and a commitment to social justice are revealed by exploring the relationships between individual psychology and systemic influences.
基金co-supported by the National Natural Science Foundation of China(No.52406041)the China Postdoctoral Science Foundation(No.2025M774200)the National Science and Technology Major Project of China(No.2019-Ⅱ-0003-0023)。
文摘Currently,the design of advanced compressor blades has reached the full ThreeDimensional(3D)modeling stage.When analyzing the reasons for the failure of popular corner stall prediction criteria for axial compressors to predict the corner flow state in modern compressor3D blades with end-bend and composite bend-sweep characteristics,it is believed that,in addition to the dihedral angle factor in the corner,the variation of the dihedral angle along the flow path is an important factor that has not been considered to date.In light of this,this study first uses the characteristic effects of the diffuser on the deceleration and pressure increase in airflow to design a series of physical models of varying dihedral angle diffusers that are equivalent to compressors.Based on these models,a quantization parameter is established to characterize the development speed of the intersection of boundary layers at the corner under varying dihedral angle and adverse pressure gradient conditions.After combining this with the effects of secondary flow,a Modified diffusion factor DJ(MDJ)is developed to describe the development of corner flow from the leading edge of the blade to its trailing edge under varying dihedral angle conditions.Finally,based on a compressor cascade database,an improved criterion for predicting corner stall in axial compressors using the MDJ diffusion factor is proposed.The validation results,based on extensive experimental data of compressor blades,reveal that this improved criterion can significantly enhance the accuracy of corner stall predictions in the 3D blades of modern compressors compared to currently used prediction criteria,by taking into account the effects of variations in the dihedral angle.
基金Project(52204164)supported by the National Natural Science Foundation of ChinaProject(2021QNRC001)supported by the Young Elite Scientists Sponsorship Program by CAST,China。
文摘The intersection is a widely used traffic line structure from the shallow tunnel to the deep roadway,and determining the subsidence hidden danger area of the roof is the key to its stability control.However,applying traditional maximum equivalent span beam(MESB)theory to determine deformation range,peak point,and angle influence poses a challenge.Considering the overall structure of the intersection roof,the maximum equivalent triangular plate(METP)theory is proposed,and its geometric parameter calculation formula and deflection calculation formula are obtained.The application of the two theories in 18 models with different intersection angles,roadway types,and surrounding rock lithology is verified by numerical analysis.The results show that:1)The METP structure of the intersection roof established by the simulation results of each model successfully determined the location of the roof’s high displacement zone;2)The area comparison method of the METP theory can be reasonably explained:①The roof subsidence of the intersection decreases with the increase of the intersection angle;②The roof subsidence at the intersection of different roadway types has a rectangular type>arch type>circular type;③The roof subsidence of the intersection with weak surrounding rock is significantly larger than that of the intersection with hard surrounding rock.According to the application results of the two theories,the four advantages of the METP theory are compared and clarified in the basic assumptions,mechanical models,main viewpoints,and mechanism analysis.The large deformation inducement of the intersection roof is then explored.The J 2 peak area of the roof drives the large deformation of the area,the peak point of which is consistent with the center of gravity position of the METP.Furthermore,the change in the range of this peak is consistent with the change law of the METP’s area.Hence,this theory clarifies the large deformation area of the intersection roof,which provides a clear guiding basis for its initial support design,mid-term monitoring,and late local reinforcement.
基金supported by the National Natural Science Foundation of China(Nos.22103084 and 22233003 to Jiayu Huang,and No.22288201 to Dong H.Zhang)the Innovation Program for Quantum Science and Technology(No.2021ZD0303305)to Dong H.Zhangthe Dalian Innovation Support Program(No.2021RD05)to Dong H.Zhang.
文摘We constructed a new set of diabatic poten-tial energy surfaces(PESs)for the two low-est states involved in Li+Li_(2)reaction by us-ing the fundamental-invariant neural net-work method.The Li_(3)system exhibits a coni-cal intersection(CI)at the geometric D_(3)h symmetries with the energy of the CI point significantly lower than the ground-state en-ab initio ergy of the diatomic molecule.The diabaitc PESs accurately reproduce adiabatic en-ergies,derivative coupling,and energy gradient information,thereby providing a high-fideli-ty description of the CI between the two lowest electronic states.Quantum dynamical calcu-lations have revealed significant non-adiabatic effects in the Li+Li_(2)reaction.
文摘At a time when humanity grapples with intersecting deficits in peace,development,security and governance,civilizations stand at a crossroads.As traditional Western-led solutions falter,China’s Global Civilization Initiative(GCI)emerges as a transformative framework,translating historical wisdom into actionable strategies.Recent forums like the 11th Nishan Forum on World Civilizations and the Global Civilizations Dialogue Ministerial Meeting underscore growing consensus on core principles:equality,mutual learning,inclusive dialogue,and collaborative response to global challenges.As Chinese President Xi Jinping pointed out in his congratulatory letter to the Global Civilizations Dialogue Ministerial Meeting,“History shows that exchanges and mutual learning among civilizations are essential for civilizations to flourish and for human progress to be made.”
基金supported by the National Natural Science Foundation of China(Grant Nos.12134005 and 12334011)the Major Research Plan of the National Natural Science Foundation of China(Grant No.92461301)。
文摘Light-induced conical intersections(LICIs)present a distinctive mechanism for nonadiabatic coupling,thereby facilitating ultrafast chemical reactions,including the indirect photodissociation of diatomic molecules.In contrast to static conical intersections,LICIs are dynamically tunable,providing a pathway for precise control of molecular dissociation.In this study,we employ the time-dependent quantum wave packet method to investigate the dissociation dynamics of the OH molecule,focusing on its ground state X^(2)Πand repulsive state 1^(2)Σ~-.By varying laser field parameters(intensity,full width at half maximum(FWHM),and wavelength),we elucidate how nonadiabatic coupling governs selective dissociation channel control.Our findings reveal that the choice of initial vibrational states and the tailoring of laser conditions significantly influence dissociation pathways,providing theoretical insights into manipulating molecular dynamics via LICIs.These results provide a foundation for future experimental studies and the development of advanced molecular control techniques.
