A series of related electrophysiology phenomena can be caused by the occurrence of interpolated ventricular premature contraction.In our recent three-dimensional Lorenz R-R scatter plot research,we found that atrioven...A series of related electrophysiology phenomena can be caused by the occurrence of interpolated ventricular premature contraction.In our recent three-dimensional Lorenz R-R scatter plot research,we found that atrioventricular node double path caused by interpolated ventricular premature contraction imprints a specifi c pattern on three-dimensional Lorenz plots generated from 24-hour Holter recordings.We found two independent subclusters separated from the interpolated premature beat precluster,the interpolated premature beat cluster,and the interpolated premature beat postcluster,respectively.Combined with use of the trajectory tracking function and the leap phenomenon,our results reveal the presence of the atrioventricular node double conduction path.展开更多
Stabilization of a plant with variable operating conditions was considered. The plant is assumed to lie in a set of interpolated models composed of all interpolations generated between certain sets of proper stable co...Stabilization of a plant with variable operating conditions was considered. The plant is assumed to lie in a set of interpolated models composed of all interpolations generated between certain sets of proper stable coprime factorizations of transfer functions of two representative models that are defined at two representative operating points. An interpolated controller that is linear interpolation of coprime factorizations of two stabilizing controllers for the two representative models is designed to stabilize this set of interpolated models. Design of such an interpolated controller was converted to a feasibility problem constrained by several LMIs and a BMI, and a two step iteration algorithm was employed to solve it.展开更多
In array signal processing, 2-D spatial-spectrum estimation is required to determine DOA of multiple signals. The circular array of sensors is found to possess several nice properties for DOA estimation of wide-band s...In array signal processing, 2-D spatial-spectrum estimation is required to determine DOA of multiple signals. The circular array of sensors is found to possess several nice properties for DOA estimation of wide-band sources. C. U. Padmini, et al.(1994) had suggested that the frequency-direction ambiguity in azimuth estimation of wide-baud signals received by a uniform linear array (ULA) can be avoided by using a circular array, even without the use of any delay elements. In 2-D spatial-spectrum estimation for wide-band signals, the authors find that it is impossible to avoid the ambiguity in source frequency-elevation angle pairs using a circular array. In this paper, interpolated circular arrays are used to perform 2-D spatial-spectrum estimation for wide-band sources. In the estimation, a large aperture circular array (Υ】λmin/2) is found to possess superior resolution capability and robustness.展开更多
In this paper, the principle of construction of a fractal surface is introduced, interpolation functions for a fractal interpolated surface are discussed, the theorem of the uniqueness of an iterated function system o...In this paper, the principle of construction of a fractal surface is introduced, interpolation functions for a fractal interpolated surface are discussed, the theorem of the uniqueness of an iterated function system of fractal interpolated surface is proved, the theorem of fractal dimension of fractal interpolated surface is derived, and the case that practical data are used to interpolate fractal surface is studied.展开更多
In this paper, the stabilization of a linear SISO plant with variable operating condition is considered. The plant is described by a linear interpolation of proper stable co-prime factorizations of the transfer functi...In this paper, the stabilization of a linear SISO plant with variable operating condition is considered. The plant is described by a linear interpolation of proper stable co-prime factorizations of the transfer functions at two representative operating points. An interpolation of the stabilizing controllers for the representative models is designed to stabilize the plant, and the necessary and sufficient condition for the plant to be stabilized by the proposed controller is presented using the Nevanlinna-Pick interpolation theory. It is shown that the class of stabilization plants via the proposed controller in the paper is larger than that by the controller in reference. An example is also given to illustrate this fact.展开更多
An approach of distane map based imageenhancement (DMIE) is proposed. It is applied toconventional interpolations to get sharp images. Edgedetection is performed after images are interpolatedby linear interpolations. ...An approach of distane map based imageenhancement (DMIE) is proposed. It is applied toconventional interpolations to get sharp images. Edgedetection is performed after images are interpolatedby linear interpolations. To meet the two conditionsset for DMIE, i. e., no abrupt changes and no over-boosting, different boosting rate should be used inadjusting pixel intensities. When the boosting rate isdetermined by using the distance from enhancedpixels to nearest edges, edge-oriented imageenhancement is obtained. By using Erosion technique,the range for pixel intensity adiustment is set.Over-enhancement is avoided by limiting the pixel iutensities in enhancement within the range. A unifled linear-time algoritiml for disance transform is adopted to deal with the calculation of Euelidean distance of the images.Its computation complexity is 0(N).After the preparation,i.e.,distance transforming and erosion,the images get more and more sharpened while no over.boosting.Occurs by repeating the enhancement procedure ,The simplicity of the enhancement operation makes DMIE suitable for enhancement rate adjusting展开更多
In this paper we define the tensor products of spaces of exponential type vectors of closed unbounded operators in Banach spaces. Using the real method of interpolation （K-functional） we prove the interpolation theo...In this paper we define the tensor products of spaces of exponential type vectors of closed unbounded operators in Banach spaces. Using the real method of interpolation （K-functional） we prove the interpolation theorems that permit to characterize of tensor products of spaces of exponential type vectors, We show an application of abstract results to the theory of regular elliptic operators on bounded domains. For such operators the exponential type vectors are root vectors. Thus we describe the tensor products of root vectors of regular elliptic operators on bounded domains.展开更多
With the continuous progress of communication technology,traditional encryption algorithms cannot meet the demands of modern wireless communication security.Secure communication based on physical layer encryption emer...With the continuous progress of communication technology,traditional encryption algorithms cannot meet the demands of modern wireless communication security.Secure communication based on physical layer encryption emerges as a solution.To meet the low Key Disagreement Rate(KDR)and high Key Generation Rate(KGR)requirements for physical layer key generation,this paper proposes two quantization algorithms,Improve-CQG and Interpolate-CQG,based on the Channel Quantization with Guard band(CQG)algorithm.The former divides the characteristic quantization into two phases:threshold filtering and guard band quantization,while the latter adds a step after these two phases:interpolation quantization.Compared to the CQG algorithm,the Improve-CQG algorithm enhances the granularity of filtered quantization values.The core concept of the Interpolate-CQG algorithm is to utilize threshold filtering and the rounded-off quantization values from the guard band quantization phase.The symbol information corresponding to these index values is replaced by a new interpolated symbol and inserted into the key by the agreed quantized coordinates.Simulation proves that the Interpolate-CQG is an effective quantization algorithm for the key generation with lower KDR and higher KGR than the Improve-CQA and Improve-CQG.展开更多
In recent years,with increasing amounts of renewable energy sources connecting to power grids,sub-/super-synchronous oscillations(SSOs)occurred more frequently.Due to the time-variant nature of SsO magnitudes and freq...In recent years,with increasing amounts of renewable energy sources connecting to power grids,sub-/super-synchronous oscillations(SSOs)occurred more frequently.Due to the time-variant nature of SsO magnitudes and frequencies,as well as the mutual interferences among SsO modes with close frequencies,the accurate parameter estimation of SsO has become a particularly challenging topic.To solve this issue,this paper proposes an improved spectrum analysis method by improving the window function and a spectrum correction method to achieve higher precision.First,by aiming at the sidelobe characteristics of the window function as evaluation criteria,a combined cosine function is optimized using a genetic algorithm(GA).Furthermore,the obtained window function is self-convolved to extend its excellent characteristics,which have better performance in reducing mutual interference from other SSO modes.Subsequently,a new form of interpolated all-phase fast Fourier transform(IpApFFT)using the optimized window function is proposed to estimate the parameters of SsO.This method allows for phase-unbiased estimation while maintaining algorithmic simplicity and expedience.The performance of the pro-posed method is demonstrated under various conditions,com-pared with other estimation methods.Simulation results validate the effectiveness and superiority of the proposed method.展开更多
We develop the interpolated finite element method to solve second-order hy-perbolic equations. The standard linear finite element solution is used to generate a newsolution by quadratic interpolation over adjacent ele...We develop the interpolated finite element method to solve second-order hy-perbolic equations. The standard linear finite element solution is used to generate a newsolution by quadratic interpolation over adjacent elements. We prove that this interpo-lated finite element solution has superconvergence. This method can easily be applied togenerating more accurate gradient either locally or globally, depending on the applications.This method is also completely vectorizable and parallelizable to take the advantages ofmodern computer structures. Several numerical examples are presented to confirm ourtheoretical analysis.展开更多
Fiber-reinforced composites are an ideal material for the lightweight design of aerospace structures. Especially in recent years, with the rapid development of composite additive manufacturing technology, the design o...Fiber-reinforced composites are an ideal material for the lightweight design of aerospace structures. Especially in recent years, with the rapid development of composite additive manufacturing technology, the design optimization of variable stiffness of fiber-reinforced composite laminates has attracted widespread attention from scholars and industry. In these aerospace composite structures, numerous cutout panels and shells serve as access points for maintaining electrical, fuel, and hydraulic systems. The traditional fiber-reinforced composite laminate subtractive drilling manufacturing inevitably faces the problems of interlayer delamination, fiber fracture, and burr of the laminate. Continuous fiber additive manufacturing technology offers the potential for integrated design optimization and manufacturing with high structural performance. Considering the integration of design and manufacturability in continuous fiber additive manufacturing, the paper proposes linear and nonlinear filtering strategies based on the Normal Distribution Fiber Optimization (NDFO) material interpolation scheme to overcome the challenge of discrete fiber optimization results, which are difficult to apply directly to continuous fiber additive manufacturing. With minimizing structural compliance as the objective function, the proposed approach provides a strategy to achieve continuity of discrete fiber paths in the variable stiffness design optimization of composite laminates with regular and irregular holes. In the variable stiffness design optimization model, the number of candidate fiber laying angles in the NDFO material interpolation scheme is considered as design variable. The sensitivity information of structural compliance with respect to the number of candidate fiber laying angles is obtained using the analytical sensitivity analysis method. Based on the proposed variable stiffness design optimization method for complex perforated composite laminates, the numerical examples consider the variable stiffness design optimization of typical non-perforated and perforated composite laminates with circular, square, and irregular holes, and systematically discuss the number of candidate discrete fiber laying angles, discrete fiber continuous filtering strategies, and filter radius on structural compliance, continuity, and manufacturability. The optimized discrete fiber angles of variable stiffness laminates are converted into continuous fiber laying paths using a streamlined process for continuous fiber additive manufacturing. Meanwhile, the optimized non-perforated and perforated MBB beams after discrete fiber continuous treatment, are manufactured using continuous fiber co-extrusion additive manufacturing technology to verify the effectiveness of the variable stiffness fiber optimization framework proposed in this paper.展开更多
In recent years,gait-based emotion recognition has been widely applied in the field of computer vision.However,existing gait emotion recognition methods typically rely on complete human skeleton data,and their accurac...In recent years,gait-based emotion recognition has been widely applied in the field of computer vision.However,existing gait emotion recognition methods typically rely on complete human skeleton data,and their accuracy significantly declines when the data is occluded.To enhance the accuracy of gait emotion recognition under occlusion,this paper proposes a Multi-scale Suppression Graph ConvolutionalNetwork(MS-GCN).TheMS-GCN consists of three main components:Joint Interpolation Module(JI Moudle),Multi-scale Temporal Convolution Network(MS-TCN),and Suppression Graph Convolutional Network(SGCN).The JI Module completes the spatially occluded skeletal joints using the(K-Nearest Neighbors)KNN interpolation method.The MS-TCN employs convolutional kernels of various sizes to comprehensively capture the emotional information embedded in the gait,compensating for the temporal occlusion of gait information.The SGCN extracts more non-prominent human gait features by suppressing the extraction of key body part features,thereby reducing the negative impact of occlusion on emotion recognition results.The proposed method is evaluated on two comprehensive datasets:Emotion-Gait,containing 4227 real gaits from sources like BML,ICT-Pollick,and ELMD,and 1000 synthetic gaits generated using STEP-Gen technology,and ELMB,consisting of 3924 gaits,with 1835 labeled with emotions such as“Happy,”“Sad,”“Angry,”and“Neutral.”On the standard datasets Emotion-Gait and ELMB,the proposed method achieved accuracies of 0.900 and 0.896,respectively,attaining performance comparable to other state-ofthe-artmethods.Furthermore,on occlusion datasets,the proposedmethod significantly mitigates the performance degradation caused by occlusion compared to other methods,the accuracy is significantly higher than that of other methods.展开更多
Given the swift proliferation of structural health monitoring(SHM)technology within tunnel engineering,there is a demand on proficiently and precisely imputing the missing monitoring data to uphold the precision of di...Given the swift proliferation of structural health monitoring(SHM)technology within tunnel engineering,there is a demand on proficiently and precisely imputing the missing monitoring data to uphold the precision of disaster prediction.In contrast to other SHM datasets,the monitoring data specific to tunnel engineering exhibits pronounced spatiotemporal correlations.Nevertheless,most methodologies fail to adequately combine these types of correlations.Hence,the objective of this study is to develop spatiotemporal recurrent neural network(ST-RNN)model,which exploits spatiotemporal information to effectively impute missing data within tunnel monitoring systems.ST-RNN consists of two moduli:a temporal module employing recurrent neural network(RNN)to capture temporal dependencies,and a spatial module employing multilayer perceptron(MLP)to capture spatial correlations.To confirm the efficacy of the model,several commonly utilized methods are chosen as baselines for conducting comparative analyses.Furthermore,parametric validity experiments are conducted to illustrate the efficacy of the parameter selection process.The experimentation is conducted using original raw datasets wherein various degrees of continuous missing data are deliberately introduced.The experimental findings indicate that the ST-RNN model,incorporating both spatiotemporal modules,exhibits superior interpolation performance compared to other baseline methods across varying degrees of missing data.This affirms the reliability of the proposed model.展开更多
This work’s aim is to participate in local materials (raw or fiber improved), which can be used in sustainable and accessible buildings to every Senegalese. To do this, studied materials are respectively collected fr...This work’s aim is to participate in local materials (raw or fiber improved), which can be used in sustainable and accessible buildings to every Senegalese. To do this, studied materials are respectively collected from a laterite clay pit in Ndouloumadjie Dembe (Matam, Northern Senegal) and another from a termite mound in Tattaguine (Fatick, Central Senegal). These samples are first subjected to Geotechnical identification tests. Mud bricks are then made with raw or sifted millet involucre improved to 1%, 2%, and 3% at 5 mm sieve samples. These briquettes are subjected to compression tests and thermal evaluations. Lagrange and Newton methods of numeric modelling are used to test the whole mixture points between 1% and 3% millet involucre for a better correlation between mechanical and thermal parameters. The results show that in Matam, as well as in Tattaguine, these muds, raw or improved, are of good thermomechanical quality when they are used in bricks making. And the thermomechanical coupling quality reaches a maximum situated at 2.125% for Ndouloumadjie and 2.05% for Tattaguine. These briquettes’ building quality depends on the mud content used in iron, aluminum, silica and clay. Thus, same natural materials can be used in the establishment of habitats according to their geotechnical, chemical, mechanical and thermal characteristics.展开更多
Indian Railways have been the largest people moving transport infrastructure in India.Over the years the systems and trains have been upgraded resulting in both better passenger amenities and reduction in travel time....Indian Railways have been the largest people moving transport infrastructure in India.Over the years the systems and trains have been upgraded resulting in both better passenger amenities and reduction in travel time.The newest addition is the Vande Bharat Express,a semi-high-speed train that was introduced in India in 2019.The train currently runs between 10 routes and has brought significant changes to India’s railway network.This article explores the introduction of Vande Bharat Express trains in India and its effects on the country’s interstation time-space shrinkage using cartographic techniques.The cartographic techniques like stepwise multidimensional scaling and interpolation using the distance cartogram plugin in QGIS are mainly used for generating the time-space maps for various speeds.The limitations of these techniques and the methods to overcome those limitations are also explored in this article.展开更多
With the rapid expansion of multimedia data,protecting digital information has become increasingly critical.Reversible data hiding offers an effective solution by allowing sensitive information to be embedded in multi...With the rapid expansion of multimedia data,protecting digital information has become increasingly critical.Reversible data hiding offers an effective solution by allowing sensitive information to be embedded in multimedia files while enabling full recovery of the original data after extraction.Audio,as a vital medium in communication,entertainment,and information sharing,demands the same level of security as images.However,embedding data in encrypted audio poses unique challenges due to the trade-offs between security,data integrity,and embedding capacity.This paper presents a novel interpolation-based reversible data hiding algorithm for encrypted audio that achieves scalable embedding capacity.By increasing sample density through interpolation,embedding opportunities are significantly enhanced while maintaining encryption throughout the process.The method further integrates multiple most significant bit(multi-MSB)prediction and Huffman coding to optimize compression and embedding efficiency.Experimental results on standard audio datasets demonstrate the proposed algorithm’s ability to embed up to 12.47 bits per sample with over 9.26 bits per sample available for pure embedding capacity,while preserving full reversibility.These results confirm the method’s suitability for secure applications that demand high embedding capacity and perfect reconstruction of original audio.This work advances reversible data hiding in encrypted audio by offering a secure,efficient,and fully reversible data hiding framework.展开更多
Purpose–This research aims to monitor seismic intensity along railway lines,study methods for calculating the extent of earthquake impact on railways and address practical challenges in estimating intensity distribut...Purpose–This research aims to monitor seismic intensity along railway lines,study methods for calculating the extent of earthquake impact on railways and address practical challenges in estimating intensity distribution along railway routes,thereby achieving graded post-earthquake response measures.Design/methodology/approach–The seismic intensity monitoring system for railways adopts a two-level architecture,namely the seismic intensity monitoring equipment and the seismic intensity rapid reporting information center processing platform.The platform obtains measured instrumental intensity through the seismic intensity monitoring equipment deployed along railways and combines it with the National Seismic Network Earthquake Catalog to generate real-time railway seismic intensity distribution maps using the Kriging interpolation algorithm.A calculation method for railway seismic impact intervals is designed to calculate the mileage intervals where the intensity area corresponding to each contour line in the seismic intensity distribution map intersects with the railway line.Findings–The system was deployed for practical earthquake monitoring demonstration applications on the Nanjiang Railway Line in Xinjiang.During the operational period,the seismic intensity monitoring equipment calculated and uploaded instrumental intensity values to the seismic intensity rapid reporting information center processing platform a total of nine times.Among these,earthquakes triggering the Kriging interpolation algorithm occurred twice.The system operated stably throughout the application period and successfully visualized relevant seismic impact data,such as earthquake intensity distribution maps and affected railway mileage sections.These results validate the system’s practicality and effectiveness.Originality/value–The seismic intensity monitoring for the railway system designed in this study can integrate the measured instrumental intensity data along railways and the earthquake catalog of the National Seismic Network.It uses the Kriging interpolation method to calculate the intensity distribution and determine the seismic impact scope,thereby addressing the issue that the seismic intensity distribution calculated by traditional attenuation formulas deviates from reality.The system can provide clear graded interval recommendations for post-earthquake disposal,effectively improve the efficiency of post-earthquake recovery and inspection and offer a decision-making basis for restoring railway operations quickly.展开更多
Gear flank modification is essential to reduce the noise generated in the gear meshing process,improve the gear transmission performance,and reduce the meshing impact.Aiming at the problem of solving the additional mo...Gear flank modification is essential to reduce the noise generated in the gear meshing process,improve the gear transmission performance,and reduce the meshing impact.Aiming at the problem of solving the additional motions of each axis in the higher-order topology modification technique and how to accurately add the different movements expressed in the form of higher-order polynomials to the corresponding motion axes of the machine tool,a flexible higher-order gear topology modification technique based on an electronic gearbox is proposed.Firstly,a two-parameter topology gear surface equation and a grinding model of wheel grinding gears are established,and the axial feed and tangential feed are expressed in a fifth-order polynomial formula.Secondly,the polynomial coefficients are solved according to the characteristics of the point contact when grinding gears.Finally,an improved electronic gearbox model is constructed by combining the polynomial interpolation function to achieve gear topology modification.The validity and feasibility of the modification method based on the electronic gearbox are verified by experimental examples,which is of great significance for the machining of modification gears based on the continuous generative grinding method of the worm grinding wheel.展开更多
Data hiding methods involve embedding secret messages into cover objects to enable covert communication in a way that is difficult to detect.In data hiding methods based on image interpolation,the image size is reduce...Data hiding methods involve embedding secret messages into cover objects to enable covert communication in a way that is difficult to detect.In data hiding methods based on image interpolation,the image size is reduced and then enlarged through interpolation,followed by the embedding of secret data into the newly generated pixels.A general improving approach for embedding secret messages is proposed.The approach may be regarded a general model for enhancing the data embedding capacity of various existing image interpolation-based data hiding methods.This enhancement is achieved by expanding the range of pixel values available for embedding secret messages,removing the limitations of many existing methods,where the range is restricted to powers of two to facilitate the direct embedding of bit-based messages.This improvement is accomplished through the application of multiple-based number conversion to the secret message data.The method converts the message bits into a multiple-based number and uses an algorithm to embed each digit of this number into an individual pixel,thereby enhancing the message embedding efficiency,as proved by a theorem derived in this study.The proposed improvement method has been tested through experiments on three well-known image interpolation-based data hiding methods.The results show that the proposed method can enhance the three data embedding rates by approximately 14%,13%,and 10%,respectively,create stego-images with good quality,and resist RS steganalysis attacks.These experimental results indicate that the use of the multiple-based number conversion technique to improve the three interpolation-based methods for embedding secret messages increases the number of message bits embedded in the images.For many image interpolation-based data hiding methods,which use power-of-two pixel-value ranges for message embedding,other than the three tested ones,the proposed improvement method is also expected to be effective for enhancing their data embedding capabilities.展开更多
With the rapid development of the nuclear power industry on a global scale,the discharge of radioactive e uents from nuclear power plants and their impact on the environment have become important issues in radioactive...With the rapid development of the nuclear power industry on a global scale,the discharge of radioactive e uents from nuclear power plants and their impact on the environment have become important issues in radioactive waste management,radiation protection,and environmental impact assessments.-detection of nuclides requires tedious processes,such as waiting for the radioactive balance of the sample and pretreatment separation,and there is an urgent need for a method specifically designed for mixing rapid energy spectrum measurement method for nuclide samples.The analysis of hybrid-energy spectrum is proposed in this study as a new algorithm,which takes advantage of the spectral analysis of-logarithmic energy spectrum and fitting ability of Fourier series.The logarithmic energy spectrum is obtained by logarithmic conversion of the hybrid linear energy spectrum.The Fourier fitting interpolation method is used to fit the logarithmic energy spectrum numerically.Next,the interpolation points for the‘e ective high-energy window’and‘e ective low-energy window’corresponding to the highest E_(m)nuclide in the hybrid logarithmic fitted energy spectrum are set,and spline interpolation is performed three times to obtain the logarithmic fitted energy spectrum of the highest E_(m)nuclide.Finally,the logarithmic fitted spectrum of the highest E_(m)nuclide is subtracted from the hybrid logarithmic fitted spectrum to obtain a logarithmic fitted spectrum comprised of the remaining lower E_(m)nuclides.The aforementioned process is iterated in a loop to resolve the logarithmic spectra of each nuclide in the original hybrid logarithmic spectra.Then,the radioactivity of E_(m)nuclides to be measured is calculated.In the experimental tests,^(14)C,^(90)Sr,and ^(90)Y spectra,which are obtained using the Fourier fitting interpolation method are compared with the original simulated ^(14)C,^(90)Sr,and ^(90)Y spectra of GEANT4.The measured liquid scintillator data of ^(90)Sr∕^(90)Y sample source and simulated data from GEANT4 are then analyzed.Analysis of the experimental results indicates that the Fourier fitting interpolation method accurately solves ^(14)C,^(90)Sr,and ^(90)Y energy spectra,which is in good agreement with the original GEANT4 simulation.The error in ^(90)Y activity,calculated using the actual detection e ciency,is less than 10%and less than 5%when using the simulated full-spectrum detection e ciency,satisfying the experimental expectations.展开更多
文摘A series of related electrophysiology phenomena can be caused by the occurrence of interpolated ventricular premature contraction.In our recent three-dimensional Lorenz R-R scatter plot research,we found that atrioventricular node double path caused by interpolated ventricular premature contraction imprints a specifi c pattern on three-dimensional Lorenz plots generated from 24-hour Holter recordings.We found two independent subclusters separated from the interpolated premature beat precluster,the interpolated premature beat cluster,and the interpolated premature beat postcluster,respectively.Combined with use of the trajectory tracking function and the leap phenomenon,our results reveal the presence of the atrioventricular node double conduction path.
文摘Stabilization of a plant with variable operating conditions was considered. The plant is assumed to lie in a set of interpolated models composed of all interpolations generated between certain sets of proper stable coprime factorizations of transfer functions of two representative models that are defined at two representative operating points. An interpolated controller that is linear interpolation of coprime factorizations of two stabilizing controllers for the two representative models is designed to stabilize this set of interpolated models. Design of such an interpolated controller was converted to a feasibility problem constrained by several LMIs and a BMI, and a two step iteration algorithm was employed to solve it.
文摘In array signal processing, 2-D spatial-spectrum estimation is required to determine DOA of multiple signals. The circular array of sensors is found to possess several nice properties for DOA estimation of wide-band sources. C. U. Padmini, et al.(1994) had suggested that the frequency-direction ambiguity in azimuth estimation of wide-baud signals received by a uniform linear array (ULA) can be avoided by using a circular array, even without the use of any delay elements. In 2-D spatial-spectrum estimation for wide-band signals, the authors find that it is impossible to avoid the ambiguity in source frequency-elevation angle pairs using a circular array. In this paper, interpolated circular arrays are used to perform 2-D spatial-spectrum estimation for wide-band sources. In the estimation, a large aperture circular array (Υ】λmin/2) is found to possess superior resolution capability and robustness.
文摘In this paper, the principle of construction of a fractal surface is introduced, interpolation functions for a fractal interpolated surface are discussed, the theorem of the uniqueness of an iterated function system of fractal interpolated surface is proved, the theorem of fractal dimension of fractal interpolated surface is derived, and the case that practical data are used to interpolate fractal surface is studied.
文摘In this paper, the stabilization of a linear SISO plant with variable operating condition is considered. The plant is described by a linear interpolation of proper stable co-prime factorizations of the transfer functions at two representative operating points. An interpolation of the stabilizing controllers for the representative models is designed to stabilize the plant, and the necessary and sufficient condition for the plant to be stabilized by the proposed controller is presented using the Nevanlinna-Pick interpolation theory. It is shown that the class of stabilization plants via the proposed controller in the paper is larger than that by the controller in reference. An example is also given to illustrate this fact.
文摘An approach of distane map based imageenhancement (DMIE) is proposed. It is applied toconventional interpolations to get sharp images. Edgedetection is performed after images are interpolatedby linear interpolations. To meet the two conditionsset for DMIE, i. e., no abrupt changes and no over-boosting, different boosting rate should be used inadjusting pixel intensities. When the boosting rate isdetermined by using the distance from enhancedpixels to nearest edges, edge-oriented imageenhancement is obtained. By using Erosion technique,the range for pixel intensity adiustment is set.Over-enhancement is avoided by limiting the pixel iutensities in enhancement within the range. A unifled linear-time algoritiml for disance transform is adopted to deal with the calculation of Euelidean distance of the images.Its computation complexity is 0(N).After the preparation,i.e.,distance transforming and erosion,the images get more and more sharpened while no over.boosting.Occurs by repeating the enhancement procedure ,The simplicity of the enhancement operation makes DMIE suitable for enhancement rate adjusting
文摘In this paper we define the tensor products of spaces of exponential type vectors of closed unbounded operators in Banach spaces. Using the real method of interpolation （K-functional） we prove the interpolation theorems that permit to characterize of tensor products of spaces of exponential type vectors, We show an application of abstract results to the theory of regular elliptic operators on bounded domains. For such operators the exponential type vectors are root vectors. Thus we describe the tensor products of root vectors of regular elliptic operators on bounded domains.
基金supported by the National Key Research and Development Program of China(No.2017YFE0135700)the High Level Talent Support Project of Hebei Province(No.A20190301).
文摘With the continuous progress of communication technology,traditional encryption algorithms cannot meet the demands of modern wireless communication security.Secure communication based on physical layer encryption emerges as a solution.To meet the low Key Disagreement Rate(KDR)and high Key Generation Rate(KGR)requirements for physical layer key generation,this paper proposes two quantization algorithms,Improve-CQG and Interpolate-CQG,based on the Channel Quantization with Guard band(CQG)algorithm.The former divides the characteristic quantization into two phases:threshold filtering and guard band quantization,while the latter adds a step after these two phases:interpolation quantization.Compared to the CQG algorithm,the Improve-CQG algorithm enhances the granularity of filtered quantization values.The core concept of the Interpolate-CQG algorithm is to utilize threshold filtering and the rounded-off quantization values from the guard band quantization phase.The symbol information corresponding to these index values is replaced by a new interpolated symbol and inserted into the key by the agreed quantized coordinates.Simulation proves that the Interpolate-CQG is an effective quantization algorithm for the key generation with lower KDR and higher KGR than the Improve-CQA and Improve-CQG.
基金supported in part by Science and Technology Project of State Grid Corporation of China(No.5108-202299269A-1-0-ZB).
文摘In recent years,with increasing amounts of renewable energy sources connecting to power grids,sub-/super-synchronous oscillations(SSOs)occurred more frequently.Due to the time-variant nature of SsO magnitudes and frequencies,as well as the mutual interferences among SsO modes with close frequencies,the accurate parameter estimation of SsO has become a particularly challenging topic.To solve this issue,this paper proposes an improved spectrum analysis method by improving the window function and a spectrum correction method to achieve higher precision.First,by aiming at the sidelobe characteristics of the window function as evaluation criteria,a combined cosine function is optimized using a genetic algorithm(GA).Furthermore,the obtained window function is self-convolved to extend its excellent characteristics,which have better performance in reducing mutual interference from other SSO modes.Subsequently,a new form of interpolated all-phase fast Fourier transform(IpApFFT)using the optimized window function is proposed to estimate the parameters of SsO.This method allows for phase-unbiased estimation while maintaining algorithmic simplicity and expedience.The performance of the pro-posed method is demonstrated under various conditions,com-pared with other estimation methods.Simulation results validate the effectiveness and superiority of the proposed method.
基金This research is supported in part by NSF Grant No.DMS-8922865,and by Funding from the Institute of Scientific Computations at the University of Wyoming through NSF Grant.
文摘We develop the interpolated finite element method to solve second-order hy-perbolic equations. The standard linear finite element solution is used to generate a newsolution by quadratic interpolation over adjacent elements. We prove that this interpo-lated finite element solution has superconvergence. This method can easily be applied togenerating more accurate gradient either locally or globally, depending on the applications.This method is also completely vectorizable and parallelizable to take the advantages ofmodern computer structures. Several numerical examples are presented to confirm ourtheoretical analysis.
基金supports for this research were provided by the National Natural Science Foundation of China(No.12272301,12002278,U1906233)the Guangdong Basic and Applied Basic Research Foundation,China(Nos.2023A1515011970,2024A1515010256)+1 种基金the Dalian City Supports Innovation and Entrepreneurship Projects for High-Level Talents,China(2021RD16)the Key R&D Project of CSCEC,China(No.CSCEC-2020-Z-4).
文摘Fiber-reinforced composites are an ideal material for the lightweight design of aerospace structures. Especially in recent years, with the rapid development of composite additive manufacturing technology, the design optimization of variable stiffness of fiber-reinforced composite laminates has attracted widespread attention from scholars and industry. In these aerospace composite structures, numerous cutout panels and shells serve as access points for maintaining electrical, fuel, and hydraulic systems. The traditional fiber-reinforced composite laminate subtractive drilling manufacturing inevitably faces the problems of interlayer delamination, fiber fracture, and burr of the laminate. Continuous fiber additive manufacturing technology offers the potential for integrated design optimization and manufacturing with high structural performance. Considering the integration of design and manufacturability in continuous fiber additive manufacturing, the paper proposes linear and nonlinear filtering strategies based on the Normal Distribution Fiber Optimization (NDFO) material interpolation scheme to overcome the challenge of discrete fiber optimization results, which are difficult to apply directly to continuous fiber additive manufacturing. With minimizing structural compliance as the objective function, the proposed approach provides a strategy to achieve continuity of discrete fiber paths in the variable stiffness design optimization of composite laminates with regular and irregular holes. In the variable stiffness design optimization model, the number of candidate fiber laying angles in the NDFO material interpolation scheme is considered as design variable. The sensitivity information of structural compliance with respect to the number of candidate fiber laying angles is obtained using the analytical sensitivity analysis method. Based on the proposed variable stiffness design optimization method for complex perforated composite laminates, the numerical examples consider the variable stiffness design optimization of typical non-perforated and perforated composite laminates with circular, square, and irregular holes, and systematically discuss the number of candidate discrete fiber laying angles, discrete fiber continuous filtering strategies, and filter radius on structural compliance, continuity, and manufacturability. The optimized discrete fiber angles of variable stiffness laminates are converted into continuous fiber laying paths using a streamlined process for continuous fiber additive manufacturing. Meanwhile, the optimized non-perforated and perforated MBB beams after discrete fiber continuous treatment, are manufactured using continuous fiber co-extrusion additive manufacturing technology to verify the effectiveness of the variable stiffness fiber optimization framework proposed in this paper.
基金supported by the National Natural Science Foundation of China(62272049,62236006,62172045)the Key Projects of Beijing Union University(ZKZD202301).
文摘In recent years,gait-based emotion recognition has been widely applied in the field of computer vision.However,existing gait emotion recognition methods typically rely on complete human skeleton data,and their accuracy significantly declines when the data is occluded.To enhance the accuracy of gait emotion recognition under occlusion,this paper proposes a Multi-scale Suppression Graph ConvolutionalNetwork(MS-GCN).TheMS-GCN consists of three main components:Joint Interpolation Module(JI Moudle),Multi-scale Temporal Convolution Network(MS-TCN),and Suppression Graph Convolutional Network(SGCN).The JI Module completes the spatially occluded skeletal joints using the(K-Nearest Neighbors)KNN interpolation method.The MS-TCN employs convolutional kernels of various sizes to comprehensively capture the emotional information embedded in the gait,compensating for the temporal occlusion of gait information.The SGCN extracts more non-prominent human gait features by suppressing the extraction of key body part features,thereby reducing the negative impact of occlusion on emotion recognition results.The proposed method is evaluated on two comprehensive datasets:Emotion-Gait,containing 4227 real gaits from sources like BML,ICT-Pollick,and ELMD,and 1000 synthetic gaits generated using STEP-Gen technology,and ELMB,consisting of 3924 gaits,with 1835 labeled with emotions such as“Happy,”“Sad,”“Angry,”and“Neutral.”On the standard datasets Emotion-Gait and ELMB,the proposed method achieved accuracies of 0.900 and 0.896,respectively,attaining performance comparable to other state-ofthe-artmethods.Furthermore,on occlusion datasets,the proposedmethod significantly mitigates the performance degradation caused by occlusion compared to other methods,the accuracy is significantly higher than that of other methods.
基金supported by the National Natural Science Foundation of China(Grant Nos.51991395 and 42293355)geological survey project of China Geological Survey:Support for Geo-hazard monitoring,early warning and prevention(Grant No.DD20230085).
文摘Given the swift proliferation of structural health monitoring(SHM)technology within tunnel engineering,there is a demand on proficiently and precisely imputing the missing monitoring data to uphold the precision of disaster prediction.In contrast to other SHM datasets,the monitoring data specific to tunnel engineering exhibits pronounced spatiotemporal correlations.Nevertheless,most methodologies fail to adequately combine these types of correlations.Hence,the objective of this study is to develop spatiotemporal recurrent neural network(ST-RNN)model,which exploits spatiotemporal information to effectively impute missing data within tunnel monitoring systems.ST-RNN consists of two moduli:a temporal module employing recurrent neural network(RNN)to capture temporal dependencies,and a spatial module employing multilayer perceptron(MLP)to capture spatial correlations.To confirm the efficacy of the model,several commonly utilized methods are chosen as baselines for conducting comparative analyses.Furthermore,parametric validity experiments are conducted to illustrate the efficacy of the parameter selection process.The experimentation is conducted using original raw datasets wherein various degrees of continuous missing data are deliberately introduced.The experimental findings indicate that the ST-RNN model,incorporating both spatiotemporal modules,exhibits superior interpolation performance compared to other baseline methods across varying degrees of missing data.This affirms the reliability of the proposed model.
文摘This work’s aim is to participate in local materials (raw or fiber improved), which can be used in sustainable and accessible buildings to every Senegalese. To do this, studied materials are respectively collected from a laterite clay pit in Ndouloumadjie Dembe (Matam, Northern Senegal) and another from a termite mound in Tattaguine (Fatick, Central Senegal). These samples are first subjected to Geotechnical identification tests. Mud bricks are then made with raw or sifted millet involucre improved to 1%, 2%, and 3% at 5 mm sieve samples. These briquettes are subjected to compression tests and thermal evaluations. Lagrange and Newton methods of numeric modelling are used to test the whole mixture points between 1% and 3% millet involucre for a better correlation between mechanical and thermal parameters. The results show that in Matam, as well as in Tattaguine, these muds, raw or improved, are of good thermomechanical quality when they are used in bricks making. And the thermomechanical coupling quality reaches a maximum situated at 2.125% for Ndouloumadjie and 2.05% for Tattaguine. These briquettes’ building quality depends on the mud content used in iron, aluminum, silica and clay. Thus, same natural materials can be used in the establishment of habitats according to their geotechnical, chemical, mechanical and thermal characteristics.
文摘Indian Railways have been the largest people moving transport infrastructure in India.Over the years the systems and trains have been upgraded resulting in both better passenger amenities and reduction in travel time.The newest addition is the Vande Bharat Express,a semi-high-speed train that was introduced in India in 2019.The train currently runs between 10 routes and has brought significant changes to India’s railway network.This article explores the introduction of Vande Bharat Express trains in India and its effects on the country’s interstation time-space shrinkage using cartographic techniques.The cartographic techniques like stepwise multidimensional scaling and interpolation using the distance cartogram plugin in QGIS are mainly used for generating the time-space maps for various speeds.The limitations of these techniques and the methods to overcome those limitations are also explored in this article.
基金funded by theNational Science and Technology Council of Taiwan under the grant number NSTC 113-2221-E-035-058.
文摘With the rapid expansion of multimedia data,protecting digital information has become increasingly critical.Reversible data hiding offers an effective solution by allowing sensitive information to be embedded in multimedia files while enabling full recovery of the original data after extraction.Audio,as a vital medium in communication,entertainment,and information sharing,demands the same level of security as images.However,embedding data in encrypted audio poses unique challenges due to the trade-offs between security,data integrity,and embedding capacity.This paper presents a novel interpolation-based reversible data hiding algorithm for encrypted audio that achieves scalable embedding capacity.By increasing sample density through interpolation,embedding opportunities are significantly enhanced while maintaining encryption throughout the process.The method further integrates multiple most significant bit(multi-MSB)prediction and Huffman coding to optimize compression and embedding efficiency.Experimental results on standard audio datasets demonstrate the proposed algorithm’s ability to embed up to 12.47 bits per sample with over 9.26 bits per sample available for pure embedding capacity,while preserving full reversibility.These results confirm the method’s suitability for secure applications that demand high embedding capacity and perfect reconstruction of original audio.This work advances reversible data hiding in encrypted audio by offering a secure,efficient,and fully reversible data hiding framework.
基金funded by the Research and Development Fund Project of China Academy of Railway Science Group Co.,Ltd.,(No:2023YJ259)the Science and Technology Research and Development Program Project of China State Railway Group Co.,Ltd.(No:J2024G008).
文摘Purpose–This research aims to monitor seismic intensity along railway lines,study methods for calculating the extent of earthquake impact on railways and address practical challenges in estimating intensity distribution along railway routes,thereby achieving graded post-earthquake response measures.Design/methodology/approach–The seismic intensity monitoring system for railways adopts a two-level architecture,namely the seismic intensity monitoring equipment and the seismic intensity rapid reporting information center processing platform.The platform obtains measured instrumental intensity through the seismic intensity monitoring equipment deployed along railways and combines it with the National Seismic Network Earthquake Catalog to generate real-time railway seismic intensity distribution maps using the Kriging interpolation algorithm.A calculation method for railway seismic impact intervals is designed to calculate the mileage intervals where the intensity area corresponding to each contour line in the seismic intensity distribution map intersects with the railway line.Findings–The system was deployed for practical earthquake monitoring demonstration applications on the Nanjiang Railway Line in Xinjiang.During the operational period,the seismic intensity monitoring equipment calculated and uploaded instrumental intensity values to the seismic intensity rapid reporting information center processing platform a total of nine times.Among these,earthquakes triggering the Kriging interpolation algorithm occurred twice.The system operated stably throughout the application period and successfully visualized relevant seismic impact data,such as earthquake intensity distribution maps and affected railway mileage sections.These results validate the system’s practicality and effectiveness.Originality/value–The seismic intensity monitoring for the railway system designed in this study can integrate the measured instrumental intensity data along railways and the earthquake catalog of the National Seismic Network.It uses the Kriging interpolation method to calculate the intensity distribution and determine the seismic impact scope,thereby addressing the issue that the seismic intensity distribution calculated by traditional attenuation formulas deviates from reality.The system can provide clear graded interval recommendations for post-earthquake disposal,effectively improve the efficiency of post-earthquake recovery and inspection and offer a decision-making basis for restoring railway operations quickly.
基金Projects(52275483,52075142,U22B2084)supported by the National Natural Science Foundation of ChinaProject(JZ2023HGPA0292)supported by the Fundamental Research Funds for the Central Universities of China。
文摘Gear flank modification is essential to reduce the noise generated in the gear meshing process,improve the gear transmission performance,and reduce the meshing impact.Aiming at the problem of solving the additional motions of each axis in the higher-order topology modification technique and how to accurately add the different movements expressed in the form of higher-order polynomials to the corresponding motion axes of the machine tool,a flexible higher-order gear topology modification technique based on an electronic gearbox is proposed.Firstly,a two-parameter topology gear surface equation and a grinding model of wheel grinding gears are established,and the axial feed and tangential feed are expressed in a fifth-order polynomial formula.Secondly,the polynomial coefficients are solved according to the characteristics of the point contact when grinding gears.Finally,an improved electronic gearbox model is constructed by combining the polynomial interpolation function to achieve gear topology modification.The validity and feasibility of the modification method based on the electronic gearbox are verified by experimental examples,which is of great significance for the machining of modification gears based on the continuous generative grinding method of the worm grinding wheel.
文摘Data hiding methods involve embedding secret messages into cover objects to enable covert communication in a way that is difficult to detect.In data hiding methods based on image interpolation,the image size is reduced and then enlarged through interpolation,followed by the embedding of secret data into the newly generated pixels.A general improving approach for embedding secret messages is proposed.The approach may be regarded a general model for enhancing the data embedding capacity of various existing image interpolation-based data hiding methods.This enhancement is achieved by expanding the range of pixel values available for embedding secret messages,removing the limitations of many existing methods,where the range is restricted to powers of two to facilitate the direct embedding of bit-based messages.This improvement is accomplished through the application of multiple-based number conversion to the secret message data.The method converts the message bits into a multiple-based number and uses an algorithm to embed each digit of this number into an individual pixel,thereby enhancing the message embedding efficiency,as proved by a theorem derived in this study.The proposed improvement method has been tested through experiments on three well-known image interpolation-based data hiding methods.The results show that the proposed method can enhance the three data embedding rates by approximately 14%,13%,and 10%,respectively,create stego-images with good quality,and resist RS steganalysis attacks.These experimental results indicate that the use of the multiple-based number conversion technique to improve the three interpolation-based methods for embedding secret messages increases the number of message bits embedded in the images.For many image interpolation-based data hiding methods,which use power-of-two pixel-value ranges for message embedding,other than the three tested ones,the proposed improvement method is also expected to be effective for enhancing their data embedding capabilities.
基金supported by the National Natural Science Foundation of China(No.12005026)。
文摘With the rapid development of the nuclear power industry on a global scale,the discharge of radioactive e uents from nuclear power plants and their impact on the environment have become important issues in radioactive waste management,radiation protection,and environmental impact assessments.-detection of nuclides requires tedious processes,such as waiting for the radioactive balance of the sample and pretreatment separation,and there is an urgent need for a method specifically designed for mixing rapid energy spectrum measurement method for nuclide samples.The analysis of hybrid-energy spectrum is proposed in this study as a new algorithm,which takes advantage of the spectral analysis of-logarithmic energy spectrum and fitting ability of Fourier series.The logarithmic energy spectrum is obtained by logarithmic conversion of the hybrid linear energy spectrum.The Fourier fitting interpolation method is used to fit the logarithmic energy spectrum numerically.Next,the interpolation points for the‘e ective high-energy window’and‘e ective low-energy window’corresponding to the highest E_(m)nuclide in the hybrid logarithmic fitted energy spectrum are set,and spline interpolation is performed three times to obtain the logarithmic fitted energy spectrum of the highest E_(m)nuclide.Finally,the logarithmic fitted spectrum of the highest E_(m)nuclide is subtracted from the hybrid logarithmic fitted spectrum to obtain a logarithmic fitted spectrum comprised of the remaining lower E_(m)nuclides.The aforementioned process is iterated in a loop to resolve the logarithmic spectra of each nuclide in the original hybrid logarithmic spectra.Then,the radioactivity of E_(m)nuclides to be measured is calculated.In the experimental tests,^(14)C,^(90)Sr,and ^(90)Y spectra,which are obtained using the Fourier fitting interpolation method are compared with the original simulated ^(14)C,^(90)Sr,and ^(90)Y spectra of GEANT4.The measured liquid scintillator data of ^(90)Sr∕^(90)Y sample source and simulated data from GEANT4 are then analyzed.Analysis of the experimental results indicates that the Fourier fitting interpolation method accurately solves ^(14)C,^(90)Sr,and ^(90)Y energy spectra,which is in good agreement with the original GEANT4 simulation.The error in ^(90)Y activity,calculated using the actual detection e ciency,is less than 10%and less than 5%when using the simulated full-spectrum detection e ciency,satisfying the experimental expectations.
