Around half of the men who have sex with men(MSM)have never been tested for human immunodeficiency virus(HIV),even though the health authorities promoted a massive scale-up of HIV testing and counseling in health faci...Around half of the men who have sex with men(MSM)have never been tested for human immunodeficiency virus(HIV),even though the health authorities promoted a massive scale-up of HIV testing and counseling in health facilities[1].HIV self-testing has been recommended by the World Health Organization as a user-friendly,convenient,rapid,and accurate approach to access HIV testing[2].An internet-based provision of self-testing services may be critical to the rollout of HIV self-testing,but more research is needed.展开更多
Objectives:College students face increasing mental health challenges.Although Acceptance and CommitmentTherapy(ACT)is effective,the efficacy of Internet-based ACT(iACT)needs further exploration.Methods:This study exam...Objectives:College students face increasing mental health challenges.Although Acceptance and CommitmentTherapy(ACT)is effective,the efficacy of Internet-based ACT(iACT)needs further exploration.Methods:This study examines the efficacy of iACT on college students’mental health through a randomized controlled trial.We recruited 90 college students(19.16±1.02 years old)and randomly divided them into the iACT group,face-to-face ACT group,and control group.The effects of the interventions were evaluated using the comprehensive assessment of ACT processes(CompACT)and the Depression Anxiety Stress Scales(DASS-21).Results:Two-factor repeated measures ANOVA revealed a significant time main effect of iACT.Face-to-face ACT and iACT effectively improved college students’psychological flexibility[F(2,83)=18.78,p<0.001,η^(2)=0.18]and alleviated their negative emotions[F(2,82)=41.17,p<0.001,η^(2)=0.36].Face-to-face ACT exhibited sustained effects on improving participants’psychological flexibility and alleviating their negative emotions(p<0.001),while iACT showed no sustained effect on improving participants’psychological flexibility(p>0.05).Conclusion:While iACT and face-to-face ACT are effective shortterm interventions,face-to-face ACT demonstrates superior sustainability.Integrating guided sessions into iACT may enhance long-term outcomes.These findings advocate for blended interventions to address college students’mental health needs,particularly in resource-limited settings.展开更多
It is challenging to diagnose isolated hyperbilirubinemia with rare and complex etiologies under the constraints of traditional testing conditions.Herein,we present a rare case of coexisting Gilbert syndrome(GS)and er...It is challenging to diagnose isolated hyperbilirubinemia with rare and complex etiologies under the constraints of traditional testing conditions.Herein,we present a rare case of coexisting Gilbert syndrome(GS)and erythropoietic protoporphyria(EPP),which has not been previously documented.CASE SUMMARY We present a rare case of coexisting GS and EPP in a 23-year-old Chinese male with a long history of jaundice and recently found splenomegaly.Serial nonspecific hemolysis screening tests yielded inconsistent results,and investigations for common hemolytic etiologies were negative.However,Levitt’s carbon monoxide breath test,which measures erythrocyte lifespan(the gold-standard marker of hemolysis),demonstrated significant hemolysis,revealing a markedly shortened erythrocyte lifespan of 11 days(normal average 120 days).Genetic testing subsequently confirmed EPP with a homozygous ferrochelatase gene mutation and GS with a heterozygous uridine diphosphate glucuronosyl trans-ferase 1A1 gene mutation.CONCLUSION The rapid,non-invasive Levitt’s carbon monoxide breath test resolved the diagnostic challenge posed by a rare and complex cause of hyperbilirubinemia.展开更多
Background:The easy accessibility,increasing usage,and low cost of internet make it a desirable way of providing health information and delivering interventions for health consumers.Studies in other countries have ver...Background:The easy accessibility,increasing usage,and low cost of internet make it a desirable way of providing health information and delivering interventions for health consumers.Studies in other countries have verified and confirmed the effectiveness of internet-based interventions among people with mental health problems.Similar programs have yet to commence in China.Purpose:This study investigated the willingness for,and attitude toward internet-based intervention in Chinese mental health service users and explored the feasibility of such an intervention.Methods:A cross-sectional survey utilizing a self-developed questionnaire was administered to 186 mental health service users in Beijing,between April and May 2011.Results:Most participants held a positive attitude toward online information and expressed interest in getting assistance from the internet.Some advice and suggestions were provided such as more ways of getting assistance,setting up more professional websites,increasing interaction,as well as having government funding and guidance.Conclusion:Internet-based programs are feasible and applicable,and worth implementing with Chinese people with mental illness.展开更多
Manufacture is facing more furiously competition in the new century. It tends to be globalized. Rapid response and technology innovation have become the key factor to the success of manufacture enterprise. At present,...Manufacture is facing more furiously competition in the new century. It tends to be globalized. Rapid response and technology innovation have become the key factor to the success of manufacture enterprise. At present, internet-based manufacturing develops rapidly. With the development of engineering material and machining techniques, better cutting properties of metal cutting tools are required. The world is paying more attention to the study of indexable carbide inserts with three-dimensional complex grooves which can affect cutting properties directly and chip-controlling. So the variety and specification of indexable insert develop quickly and the application of insert with three-dimensional complex chip-former becomes wider and wider. Because milling is an interrupted cutting, the process of milling is complicated and the failure of the milling inserts is severe. It is important to choose suitable milling inserts groove for particular machining conditions before actual machining, it will extend tool life and raise productivity. Optimization and choice of inserts with complex groove via internet may serve for manufacture enterprises all over the world. The milling inserts with three-dimensional complex grooves are optimized and chosen via Internet in this paper. The face-milling process is studied, with the mathematics models of cutting force for different shape of cutting edges established, the cutting forces predicted and stress-fields of different insert grooves analyzed by FEM, according to the predictable results and the most suitable insert groove for particular machining conditions are optimized and chosen. The complex groove optimization and choice are based on a client/server model, with the client and server being on different machines across the internet. Communication between the client and server uses the TCP/IP. The result of optimization and choice will be sent to the users via Internet. Manufacturers all over the world can get the desired insert groove without paying for expensive experiments. Thus, the cost and lead time of products are reduced.展开更多
There is a documented and often unmet need for interventions aimed at supporting young people with attention-deficit/hyperactivity disorder (ADHD) and/or autism spectrum disorder (ASD) in their transition between adol...There is a documented and often unmet need for interventions aimed at supporting young people with attention-deficit/hyperactivity disorder (ADHD) and/or autism spectrum disorder (ASD) in their transition between adolescence and adulthood. Difficulties with social interaction, initiation difficulties, and impairments in executive function can complicate visits at a clinic, i.e. traditional treatment, for individuals with neuropsychiatric disorders (NPD). A model for internet-based support and coaching aimed at young people with ASD and/or ADHD was developed and tested at three treatment sites in western Sweden. The implementation was analyzed against an inventory according to which implementations are more likely to be successful if an intervention: 1) has advantages compared to other existing methods, 2) matches the individual and organizational values, norms and work practices of its recipients, 3) is perceived as easy to use, and 4) is adaptable to local conditions and the recipients’ needs. Data were collected through group interviews with professionals involved in the implementation of the intervention. The implementation of the intervention showed promising results on measures such as access, delivery/quality of healthcare services, and equality of distribution of healthcare services. The identified impediments to successful implementation related to a wide range of factors and levels, including the design of the intervention, technical issues, attitudes of staff, organizational culture, and organizational structure at the implementation sites in terms of patient stock, work division, and resource allocation. The results are consistent with previous studies that stress the need for multi-component implementation strategies.展开更多
Based on QoS (quality of service) parameters: time delay, jitter, bandwidth and package loss. As time delay in the Internet is variable, it is hard to compensate it by traditional methods. Event synchronization commun...Based on QoS (quality of service) parameters: time delay, jitter, bandwidth and package loss. As time delay in the Internet is variable, it is hard to compensate it by traditional methods. Event synchronization communication driven method is proposed to overcome the negative effects induced by time delay. This method is a non-time based method and it can get rid of the effects of time in the control loop of telerobotics. Stability, transparency and synchronization can be maintained in it by event-driven method. Multimodal enhanced telerobotics is put forward with its feedback including force, video, audio and temperature etc. The use of multimodal feedback improves the efficiency and safety of the whole system. Synchronization in multimodal feedback is hard to ensure and event-driven method is also good for it. Experiments on an Internet-based shaft-hole assemblage system show good results by using event synchronization communication driven method and UDP protocol.展开更多
Objectives:This study reviewed published randomized controlled trials(RCTs)and evaluated the efficacy of internet-based acceptance and commitment therapy(IACT)on adolescent mental health.Methods:Searches were conducte...Objectives:This study reviewed published randomized controlled trials(RCTs)and evaluated the efficacy of internet-based acceptance and commitment therapy(IACT)on adolescent mental health.Methods:Searches were conducted in PubMed,ProQuest,APA(PsycNET/PsycINFO),and Web of Science from inception to Jan-uary 2022 to identify RCTs evaluating the effects of IACT on adolescents.The included studies were assessed for quality and risk of bias.This study was performed using the standard mean difference and associated 95%confidence interval of effective measures.Review Manager 5.4 software was adopted to calculate the effect size.Results:Compared to adolescents in control groups,those in the IACT groups showed some improvement in the efficacy of depression symptoms(SMD=−0.24,95%CI=[−0.44,−0.05],p=0.01)and had a small but sig-nificant effect on reducing experiential avoidance(SMD=−0.24,95%CI=[−0.46,−0.01],p=0.04).However,the effect size on anxiety did not reach the threshold(SMD=−0.18,95%CI=[−0.27,−0.09],p<0.0001).In addition,there were no significant differences in stress and well-being compared to those of the control group.Compared with universal adolescents,IACT was found to have a more significant therapeutic effect on targeted adolescents.Conclusions:IACT is effective in adolescent mental health interventions,but its clinical reliability and significant efficacy are limited,and more rigorous RCTs are needed in future studies.展开更多
With the development of internet technology, customers play more and more important roles in new product development. The paper defines customer knowledge; then analyses the modes of customer knowledge transferring ba...With the development of internet technology, customers play more and more important roles in new product development. The paper defines customer knowledge; then analyses the modes of customer knowledge transferring based on SECI model and information emission model. Finally customer knowledge transferring mechanism is discussed.展开更多
For many years, computer technology has been used for patient evaluation in psychiatry, although, for the most part, the applications have been in clinical trials or other research projects. Computer-administered eval...For many years, computer technology has been used for patient evaluation in psychiatry, although, for the most part, the applications have been in clinical trials or other research projects. Computer-administered evaluations are thought to be more comprehensive and reliable and less biased than evaluations routinely conducted in clinical practice. Also, the use of continuous monitoring systems, which increasingly entails computer administration, has been related to improved treatment outcome. This report describes the development of a broad spectrum neuropsychiatric symptom questionnaire (NP3) that is freely available over the internet and prints a report as soon as the patient and/or concurrent informants have completed the test. The results of the questionnaire can be saved to a central database in order to generate serial reports.展开更多
Two significant issues in Internet-based networked control systems （ INCSs）, transport performance of different protocols and security breach from Internet side, are investigated. First, for improving the performanc...Two significant issues in Internet-based networked control systems （ INCSs）, transport performance of different protocols and security breach from Internet side, are investigated. First, for improving the performance of data transmission, user datagram protocol （UDP） is adopted as the main stand for controllers and plants using INCSs. Second, a dual-channel secure transmission scheme （DCSTS）based on data transmission characteristics of INCSs is proposed, in which a raw UDP channel and a secure TCP （transmission control protocol） connection making use of SSL/TLS （secure sockets layer/transport layer security） are included. Further, a networked control protocol （NCP） at application layer for supporting DCSTS between the controllers and plants in INCSs is designed, and it also aims at providing a universal communication mechanism for interoperability of devices among the networked control laboratories in Beijing Institute of Technology of China, Central South University of China and Tokyo University of Technology of Japan. By means of a networked single-degree-of-free- dom robot arm, an INCS under the new protocol and security environment is created. Compared with systems such as IPSec or SSL/TLS, which may cause more than 91% network throughput deduction, the new DCSTS protocol may yield results ten times better, being just 5.67%.展开更多
Induction and mentoring programs aim to help new school teachers survive and thrive in their teaching profession.Among each juris-diction of Canada,there are different programs and most of them are characterized by In...Induction and mentoring programs aim to help new school teachers survive and thrive in their teaching profession.Among each juris-diction of Canada,there are different programs and most of them are characterized by Internet-based supports.On the websites of the provincial departments of education or teachers’organizations,well-designed webpages are set for induction programs,special portals are designed for new teachers,and documents relating to early career teaching are provided.Even on some local school districts’websites,induction programs and relevant documents are easily accessed.Based on the above facts,this paper also analyzes the advantages and limitations of those Internet-based approaches in Canadian teacher in-duction activities.展开更多
Spoken language is such an important part in learning English that College English Curriculum Requirement considers promoting the students' spoken language as one of the most important goals in teaching English.Ho...Spoken language is such an important part in learning English that College English Curriculum Requirement considers promoting the students' spoken language as one of the most important goals in teaching English.However,at present,the students' oral expression competence is not so good in colleges.It is urgent to improve the quality of oral English classes and solve mute English of the students in colleges.Internet-based teaching is the new teaching mode adapting to the trend of the times.Internet provides excellent interactive methods for inquiry learning mode and provides the possibility for constructing an open learning environment.展开更多
NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a nec...NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a necessary option for the detection of existing exhaust emission standards. At present, there is limited and scattered information on knowledge and test methods of NOx sensors, the research of NOx sensors has become a challenging research topic at home and abroad. Based on these requirements, the article systematically integrates the knowledge of principle and testing methods. First of all, through introducing functional description of NOx sensors and the basic principle of NOx sensors, the relevant scholars can have an overall understanding of the product and master the operation mode of products. Secondly, the current status of performance test bench and methods of NOx sensors were described, which can contribute to having a clear understanding of the development process. After that, a new structure of NOx sensors test bench was purposed, which contains six major units including standard gas source, gas mixing unit, analyzer measurement unit, sensor measurement unit, data processing and display unit, exhaust gas treatment unit. And the test bench was validated. The experimental results show that the test bench has the advantages of high-repeatability, high reliability and low cost. And it can realize automatic detection of multiple target values, which is worthy further promotion. Thereby, the article can contribute to the development of its technology indirectly.展开更多
The rapid progress in the construction of heavy-haul and high-speed railways has led to a surge in rail defects and unforeseen failures.Addressing this issue necessitates the implementation of more sophisticated rail ...The rapid progress in the construction of heavy-haul and high-speed railways has led to a surge in rail defects and unforeseen failures.Addressing this issue necessitates the implementation of more sophisticated rail inspection methods,specifically involving real-time,precise detection,and assessment of rail defects.Current applications fail to address the evolving requirements,prompting the need for advancements.This paper provides a summary of various types of rail defects and outlines both traditional and innovative non-destructive inspection techniques,examining their fundamental features,benefits,drawbacks,and practical suitability for railway track inspection.It also explores potential enhancements to equipment and software.The comprehensive review draws upon pertinent international research and review papers.Furthermore,the paper introduces a fusion of inspection methods aimed at enhancing the overall reliability of defect detection.展开更多
The purpose of this study is to analyze the application of ultrasonic non-destructive testing technology in bridge engineering.During the research phase,based on literature collection and reading,as well as the analys...The purpose of this study is to analyze the application of ultrasonic non-destructive testing technology in bridge engineering.During the research phase,based on literature collection and reading,as well as the analysis of bridge inspection materials,the principle of ultrasonic non-destructive testing technology and its adaptability to bridge engineering are elaborated.Subsequently,starting from the preparation work before inspection until damage assessment,the entire process of ultrasonic non-destructive testing is studied,and finally,a technical system of ultrasonic non-destructive testing for bridge engineering that runs through the entire process is formed.It is hoped that this article can provide technical reference value for relevant units in China,and promote the high-quality development of China’s bridge engineering from a macro perspective.展开更多
The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analy...The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analysis scheme is proposed in this paper to investigate the soil deformation behavior under the coupling of stress and drying-wetting cycles.A new device is developed based on CT(computerized tomography)workstation to apply certain normal and shear stresses on a soil specimen during drying-wetting cycles.A series of tests are conducted on a type of loess with various coupling of stress paths and drying-wetting cycles.At macroscopic level,stress sensor and laser sensor are used to acquire stress and strain,respectively.The shear and volumetric strain increase during the first few drying-wetting cycles and then become stable.The increase of the shear stress level or confining pressure would cause higher increase rate and the value of shear strain in the process of drying-wetting cycles.At microscopic level,the grayscale value(GSV)of CT scanning image is characterized as the proportion of soil particles to voids.A fabric state parameter is proposed to characterize soil microstructures under the influence of stress and drying-wetting cycle.Test results indicate that the macroand micro-responses show high consistence and relevance.The stress and drying-wetting cycles would both induce collapse of the soil microstructure,which dominants degradation of the soil mechanical properties.The evolution of the macro-mechanical property of soil exhibits a positive linear relationship with the micro-evolution of the fabric state parameter.展开更多
基金supported by the National Science and Technology Major Project Research of the 13th Five-Year[No.2018ZX10101001-001-003]National Natural Science Foundation of China[No.81872674]AIDS Healthcare Foundation(AHF)China program[No.2016-P-001]。
文摘Around half of the men who have sex with men(MSM)have never been tested for human immunodeficiency virus(HIV),even though the health authorities promoted a massive scale-up of HIV testing and counseling in health facilities[1].HIV self-testing has been recommended by the World Health Organization as a user-friendly,convenient,rapid,and accurate approach to access HIV testing[2].An internet-based provision of self-testing services may be critical to the rollout of HIV self-testing,but more research is needed.
基金funded by the Education and Teaching Reform Research Major Project of Anhui Province(2022xqhz023)(2023sx170).
文摘Objectives:College students face increasing mental health challenges.Although Acceptance and CommitmentTherapy(ACT)is effective,the efficacy of Internet-based ACT(iACT)needs further exploration.Methods:This study examines the efficacy of iACT on college students’mental health through a randomized controlled trial.We recruited 90 college students(19.16±1.02 years old)and randomly divided them into the iACT group,face-to-face ACT group,and control group.The effects of the interventions were evaluated using the comprehensive assessment of ACT processes(CompACT)and the Depression Anxiety Stress Scales(DASS-21).Results:Two-factor repeated measures ANOVA revealed a significant time main effect of iACT.Face-to-face ACT and iACT effectively improved college students’psychological flexibility[F(2,83)=18.78,p<0.001,η^(2)=0.18]and alleviated their negative emotions[F(2,82)=41.17,p<0.001,η^(2)=0.36].Face-to-face ACT exhibited sustained effects on improving participants’psychological flexibility and alleviating their negative emotions(p<0.001),while iACT showed no sustained effect on improving participants’psychological flexibility(p>0.05).Conclusion:While iACT and face-to-face ACT are effective shortterm interventions,face-to-face ACT demonstrates superior sustainability.Integrating guided sessions into iACT may enhance long-term outcomes.These findings advocate for blended interventions to address college students’mental health needs,particularly in resource-limited settings.
文摘It is challenging to diagnose isolated hyperbilirubinemia with rare and complex etiologies under the constraints of traditional testing conditions.Herein,we present a rare case of coexisting Gilbert syndrome(GS)and erythropoietic protoporphyria(EPP),which has not been previously documented.CASE SUMMARY We present a rare case of coexisting GS and EPP in a 23-year-old Chinese male with a long history of jaundice and recently found splenomegaly.Serial nonspecific hemolysis screening tests yielded inconsistent results,and investigations for common hemolytic etiologies were negative.However,Levitt’s carbon monoxide breath test,which measures erythrocyte lifespan(the gold-standard marker of hemolysis),demonstrated significant hemolysis,revealing a markedly shortened erythrocyte lifespan of 11 days(normal average 120 days).Genetic testing subsequently confirmed EPP with a homozygous ferrochelatase gene mutation and GS with a heterozygous uridine diphosphate glucuronosyl trans-ferase 1A1 gene mutation.CONCLUSION The rapid,non-invasive Levitt’s carbon monoxide breath test resolved the diagnostic challenge posed by a rare and complex cause of hyperbilirubinemia.
文摘Background:The easy accessibility,increasing usage,and low cost of internet make it a desirable way of providing health information and delivering interventions for health consumers.Studies in other countries have verified and confirmed the effectiveness of internet-based interventions among people with mental health problems.Similar programs have yet to commence in China.Purpose:This study investigated the willingness for,and attitude toward internet-based intervention in Chinese mental health service users and explored the feasibility of such an intervention.Methods:A cross-sectional survey utilizing a self-developed questionnaire was administered to 186 mental health service users in Beijing,between April and May 2011.Results:Most participants held a positive attitude toward online information and expressed interest in getting assistance from the internet.Some advice and suggestions were provided such as more ways of getting assistance,setting up more professional websites,increasing interaction,as well as having government funding and guidance.Conclusion:Internet-based programs are feasible and applicable,and worth implementing with Chinese people with mental illness.
文摘Manufacture is facing more furiously competition in the new century. It tends to be globalized. Rapid response and technology innovation have become the key factor to the success of manufacture enterprise. At present, internet-based manufacturing develops rapidly. With the development of engineering material and machining techniques, better cutting properties of metal cutting tools are required. The world is paying more attention to the study of indexable carbide inserts with three-dimensional complex grooves which can affect cutting properties directly and chip-controlling. So the variety and specification of indexable insert develop quickly and the application of insert with three-dimensional complex chip-former becomes wider and wider. Because milling is an interrupted cutting, the process of milling is complicated and the failure of the milling inserts is severe. It is important to choose suitable milling inserts groove for particular machining conditions before actual machining, it will extend tool life and raise productivity. Optimization and choice of inserts with complex groove via internet may serve for manufacture enterprises all over the world. The milling inserts with three-dimensional complex grooves are optimized and chosen via Internet in this paper. The face-milling process is studied, with the mathematics models of cutting force for different shape of cutting edges established, the cutting forces predicted and stress-fields of different insert grooves analyzed by FEM, according to the predictable results and the most suitable insert groove for particular machining conditions are optimized and chosen. The complex groove optimization and choice are based on a client/server model, with the client and server being on different machines across the internet. Communication between the client and server uses the TCP/IP. The result of optimization and choice will be sent to the users via Internet. Manufacturers all over the world can get the desired insert groove without paying for expensive experiments. Thus, the cost and lead time of products are reduced.
文摘There is a documented and often unmet need for interventions aimed at supporting young people with attention-deficit/hyperactivity disorder (ADHD) and/or autism spectrum disorder (ASD) in their transition between adolescence and adulthood. Difficulties with social interaction, initiation difficulties, and impairments in executive function can complicate visits at a clinic, i.e. traditional treatment, for individuals with neuropsychiatric disorders (NPD). A model for internet-based support and coaching aimed at young people with ASD and/or ADHD was developed and tested at three treatment sites in western Sweden. The implementation was analyzed against an inventory according to which implementations are more likely to be successful if an intervention: 1) has advantages compared to other existing methods, 2) matches the individual and organizational values, norms and work practices of its recipients, 3) is perceived as easy to use, and 4) is adaptable to local conditions and the recipients’ needs. Data were collected through group interviews with professionals involved in the implementation of the intervention. The implementation of the intervention showed promising results on measures such as access, delivery/quality of healthcare services, and equality of distribution of healthcare services. The identified impediments to successful implementation related to a wide range of factors and levels, including the design of the intervention, technical issues, attitudes of staff, organizational culture, and organizational structure at the implementation sites in terms of patient stock, work division, and resource allocation. The results are consistent with previous studies that stress the need for multi-component implementation strategies.
文摘Based on QoS (quality of service) parameters: time delay, jitter, bandwidth and package loss. As time delay in the Internet is variable, it is hard to compensate it by traditional methods. Event synchronization communication driven method is proposed to overcome the negative effects induced by time delay. This method is a non-time based method and it can get rid of the effects of time in the control loop of telerobotics. Stability, transparency and synchronization can be maintained in it by event-driven method. Multimodal enhanced telerobotics is put forward with its feedback including force, video, audio and temperature etc. The use of multimodal feedback improves the efficiency and safety of the whole system. Synchronization in multimodal feedback is hard to ensure and event-driven method is also good for it. Experiments on an Internet-based shaft-hole assemblage system show good results by using event synchronization communication driven method and UDP protocol.
基金the Humanities and Social Sciences Key Research Base Project of Anhui Province(SK2017A0278).
文摘Objectives:This study reviewed published randomized controlled trials(RCTs)and evaluated the efficacy of internet-based acceptance and commitment therapy(IACT)on adolescent mental health.Methods:Searches were conducted in PubMed,ProQuest,APA(PsycNET/PsycINFO),and Web of Science from inception to Jan-uary 2022 to identify RCTs evaluating the effects of IACT on adolescents.The included studies were assessed for quality and risk of bias.This study was performed using the standard mean difference and associated 95%confidence interval of effective measures.Review Manager 5.4 software was adopted to calculate the effect size.Results:Compared to adolescents in control groups,those in the IACT groups showed some improvement in the efficacy of depression symptoms(SMD=−0.24,95%CI=[−0.44,−0.05],p=0.01)and had a small but sig-nificant effect on reducing experiential avoidance(SMD=−0.24,95%CI=[−0.46,−0.01],p=0.04).However,the effect size on anxiety did not reach the threshold(SMD=−0.18,95%CI=[−0.27,−0.09],p<0.0001).In addition,there were no significant differences in stress and well-being compared to those of the control group.Compared with universal adolescents,IACT was found to have a more significant therapeutic effect on targeted adolescents.Conclusions:IACT is effective in adolescent mental health interventions,but its clinical reliability and significant efficacy are limited,and more rigorous RCTs are needed in future studies.
文摘With the development of internet technology, customers play more and more important roles in new product development. The paper defines customer knowledge; then analyses the modes of customer knowledge transferring based on SECI model and information emission model. Finally customer knowledge transferring mechanism is discussed.
文摘For many years, computer technology has been used for patient evaluation in psychiatry, although, for the most part, the applications have been in clinical trials or other research projects. Computer-administered evaluations are thought to be more comprehensive and reliable and less biased than evaluations routinely conducted in clinical practice. Also, the use of continuous monitoring systems, which increasingly entails computer administration, has been related to improved treatment outcome. This report describes the development of a broad spectrum neuropsychiatric symptom questionnaire (NP3) that is freely available over the internet and prints a report as soon as the patient and/or concurrent informants have completed the test. The results of the questionnaire can be saved to a central database in order to generate serial reports.
文摘Two significant issues in Internet-based networked control systems （ INCSs）, transport performance of different protocols and security breach from Internet side, are investigated. First, for improving the performance of data transmission, user datagram protocol （UDP） is adopted as the main stand for controllers and plants using INCSs. Second, a dual-channel secure transmission scheme （DCSTS）based on data transmission characteristics of INCSs is proposed, in which a raw UDP channel and a secure TCP （transmission control protocol） connection making use of SSL/TLS （secure sockets layer/transport layer security） are included. Further, a networked control protocol （NCP） at application layer for supporting DCSTS between the controllers and plants in INCSs is designed, and it also aims at providing a universal communication mechanism for interoperability of devices among the networked control laboratories in Beijing Institute of Technology of China, Central South University of China and Tokyo University of Technology of Japan. By means of a networked single-degree-of-free- dom robot arm, an INCS under the new protocol and security environment is created. Compared with systems such as IPSec or SSL/TLS, which may cause more than 91% network throughput deduction, the new DCSTS protocol may yield results ten times better, being just 5.67%.
基金supported by Humanities and Social Sciences Planning Fund Project,Ministry of Education of the PRC(under Grant No.18YJA880102).
文摘Induction and mentoring programs aim to help new school teachers survive and thrive in their teaching profession.Among each juris-diction of Canada,there are different programs and most of them are characterized by Internet-based supports.On the websites of the provincial departments of education or teachers’organizations,well-designed webpages are set for induction programs,special portals are designed for new teachers,and documents relating to early career teaching are provided.Even on some local school districts’websites,induction programs and relevant documents are easily accessed.Based on the above facts,this paper also analyzes the advantages and limitations of those Internet-based approaches in Canadian teacher in-duction activities.
文摘Spoken language is such an important part in learning English that College English Curriculum Requirement considers promoting the students' spoken language as one of the most important goals in teaching English.However,at present,the students' oral expression competence is not so good in colleges.It is urgent to improve the quality of oral English classes and solve mute English of the students in colleges.Internet-based teaching is the new teaching mode adapting to the trend of the times.Internet provides excellent interactive methods for inquiry learning mode and provides the possibility for constructing an open learning environment.
文摘NOx sensors, as a core component of diesel engine exhaust treatment system, play an important role in exhaust emission control, which can accurately and quickly detect the NOx and O2 concentration. It has become a necessary option for the detection of existing exhaust emission standards. At present, there is limited and scattered information on knowledge and test methods of NOx sensors, the research of NOx sensors has become a challenging research topic at home and abroad. Based on these requirements, the article systematically integrates the knowledge of principle and testing methods. First of all, through introducing functional description of NOx sensors and the basic principle of NOx sensors, the relevant scholars can have an overall understanding of the product and master the operation mode of products. Secondly, the current status of performance test bench and methods of NOx sensors were described, which can contribute to having a clear understanding of the development process. After that, a new structure of NOx sensors test bench was purposed, which contains six major units including standard gas source, gas mixing unit, analyzer measurement unit, sensor measurement unit, data processing and display unit, exhaust gas treatment unit. And the test bench was validated. The experimental results show that the test bench has the advantages of high-repeatability, high reliability and low cost. And it can realize automatic detection of multiple target values, which is worthy further promotion. Thereby, the article can contribute to the development of its technology indirectly.
文摘The rapid progress in the construction of heavy-haul and high-speed railways has led to a surge in rail defects and unforeseen failures.Addressing this issue necessitates the implementation of more sophisticated rail inspection methods,specifically involving real-time,precise detection,and assessment of rail defects.Current applications fail to address the evolving requirements,prompting the need for advancements.This paper provides a summary of various types of rail defects and outlines both traditional and innovative non-destructive inspection techniques,examining their fundamental features,benefits,drawbacks,and practical suitability for railway track inspection.It also explores potential enhancements to equipment and software.The comprehensive review draws upon pertinent international research and review papers.Furthermore,the paper introduces a fusion of inspection methods aimed at enhancing the overall reliability of defect detection.
文摘The purpose of this study is to analyze the application of ultrasonic non-destructive testing technology in bridge engineering.During the research phase,based on literature collection and reading,as well as the analysis of bridge inspection materials,the principle of ultrasonic non-destructive testing technology and its adaptability to bridge engineering are elaborated.Subsequently,starting from the preparation work before inspection until damage assessment,the entire process of ultrasonic non-destructive testing is studied,and finally,a technical system of ultrasonic non-destructive testing for bridge engineering that runs through the entire process is formed.It is hoped that this article can provide technical reference value for relevant units in China,and promote the high-quality development of China’s bridge engineering from a macro perspective.
基金funded by National Key R&D Program of China(Grant No.2023YFC3007001)Beijing Natural Science Foundation(Grant No.8244053)China Postdoctoral Science Foundation(Grant No.2024M754065).
文摘The mechanical behavior of cohesive soil is sensitized to drying-wetting cycles under confinements.However,the hydromechanical coupling effect has not been considered in current constitutive models.A macro-micro analysis scheme is proposed in this paper to investigate the soil deformation behavior under the coupling of stress and drying-wetting cycles.A new device is developed based on CT(computerized tomography)workstation to apply certain normal and shear stresses on a soil specimen during drying-wetting cycles.A series of tests are conducted on a type of loess with various coupling of stress paths and drying-wetting cycles.At macroscopic level,stress sensor and laser sensor are used to acquire stress and strain,respectively.The shear and volumetric strain increase during the first few drying-wetting cycles and then become stable.The increase of the shear stress level or confining pressure would cause higher increase rate and the value of shear strain in the process of drying-wetting cycles.At microscopic level,the grayscale value(GSV)of CT scanning image is characterized as the proportion of soil particles to voids.A fabric state parameter is proposed to characterize soil microstructures under the influence of stress and drying-wetting cycle.Test results indicate that the macroand micro-responses show high consistence and relevance.The stress and drying-wetting cycles would both induce collapse of the soil microstructure,which dominants degradation of the soil mechanical properties.The evolution of the macro-mechanical property of soil exhibits a positive linear relationship with the micro-evolution of the fabric state parameter.
