Convection driven by a spatially non-uniform internal heat source between two horizontal isothermal walls is studied by theoretical analysis and numerical simulation,in order to explore the bounds of the temperature a...Convection driven by a spatially non-uniform internal heat source between two horizontal isothermal walls is studied by theoretical analysis and numerical simulation,in order to explore the bounds of the temperature and the vertical heat flux.Specifically,the rigorous lower bound of the weighted average temperature<QT>is derived analytically,by decomposing the temperature field into a background profile and a fluctuation part.This bound obtained for the first time to consider non-uniform heat sources is found to be compatible with the existing bound obtained in uniform internal heat convection.Of physical importance,an analytical relationship is derived as an inequality connecting<QT>and the average vertical heat flux<wT>,by employing the average heat flux on the bottom wall(qb)as an intermediary variable.It clarifies the intrinsic relation between the lower bound of<QT>and the upper bound of<wT>,namely,these two bounds are essentially equivalent providing an easy way to obtain one from another.Furthermore,the analytical bounds are extensively demonstrated through a comprehensive series of direct numerical simulations.展开更多
This theoretical study investigates the microrotation effects on mixed convection flow induced by a stretching sheet. Casson fluid model along with microrotation is considered to model the governing flow problem. The ...This theoretical study investigates the microrotation effects on mixed convection flow induced by a stretching sheet. Casson fluid model along with microrotation is considered to model the governing flow problem. The system is assumed to undergo internal heating phenomenon. The governing physical problem is transformed into system of nonlinear ordinary differential equations using scaling group of transformations. These equations are solved numerically using Runge Kutta Fehlberg scheme coupled with shooting technique. Influence of sundry parameters for the case of strong and weak concentration of microelements on velocity, temperature, skin friction and local heat flux at the surface are computed and discussed. Lower skin friction and heat flux is observed for the case of weak concentration(n = 0.5)compared to strong concentration of microelements(n = 0.0) near the wall.展开更多
The present work aims to investigate transverse Oldroyd-B nanofluid flow on a stretched panel with consideration of internal heat generation. Buongiorno model is utilized to study influence of thermophoresis and Brown...The present work aims to investigate transverse Oldroyd-B nanofluid flow on a stretched panel with consideration of internal heat generation. Buongiorno model is utilized to study influence of thermophoresis and Brownian motion effects. A numerical procedure known as Keller box algorithm is used to solve the governed physical model.Graphically velocity, temperature and concentration of nanoparticles are expressed. Also, concerned physical measures such as heat and mass transfer are investigated numerically. The simulations performed revealed that fluid parameters play a significant role in heat transfer under Brownian motion and thermophoresis effects. Local heat flux is elevated while local mass flux is suppressed with enhancing Brownian motion parameter. Streamlines pattern exhibits that flow is more inclined in the presence of Deborah number effects. To the best of our knowledge, transverse flow of an Oldroyd-B type fluid which incorporates the thermal relaxation effects has never been reported before in the presence of Brownian motion and internal heating phenomenon. Therefore we intend to discuss these features in detail. The obtained results are a novel contribution, which can be benchmark for further relevant academic research related to polymer industry.展开更多
The aim of this investigation is to analyze the effectiveness of Lorentz force, viscous dissipation and internal heating on the heat and flow characteristics of a non-Newtonian Casson fluid thin film resting on a stre...The aim of this investigation is to analyze the effectiveness of Lorentz force, viscous dissipation and internal heating on the heat and flow characteristics of a non-Newtonian Casson fluid thin film resting on a stretching surface under the influence of a magnetic field. Employing suitable similarity variables and shooting technique and integrating scheme numerical solutions for velocity and temperature are obtained. The results of this analysis are compared with the published work and are found to be in good agreement. The thickness of the thin film is evaluated and is observed that Lorentz force and the non-Newtonian nature of the fluid have a thinning influence on the film. Velocity and temperature distributions in the thin film are discussed for various flow parameters.展开更多
The aim of this paper was to characterize through experiment the moisture and temperature kinetic behavior of Eucalyptus gomphocephala wood samples using microwave heating(MWH)in two scenarios:intermittently and conti...The aim of this paper was to characterize through experiment the moisture and temperature kinetic behavior of Eucalyptus gomphocephala wood samples using microwave heating(MWH)in two scenarios:intermittently and continuously.The mechanical properties and surface appearance of the heated samples were also investigated.Continuous and intermittent microwave drying kinetic experiments were conducted at a frequency of 2.45 GHz using a microwave laboratory oven at 300,500,and 1000 watts.Drying rate curves indicated three distinct phases of MWH.Increasing the microwave power with a shorter drying time led to rapid increases in internal temperature and water evaporation rates of the heated samples.Mechanical results indicated that samples heated under continuous MW(Microwave)power at 300 watts had a modulus of rupture(MOR)and modulus of elasticity(MOE)in three static bending tests higher than 29%and 36%,respectively,than samples heated at 1000 watts.Intermittent microwave heating(IMWH)of samples at 300 and 1000 watts produced the highest MOR and MOE values of 31%and 51%,respectively,unlike those heated under continuous microwave heating(CMWH).External qualitative observation showed that samples heated at high microwave power had severe surface checks.These defects were missing when using IMWH.An analysis of variance(ANOVA)showed that mechanical properties were linked to both microwave power level and the heating scenario,except for MOR in axial compression under CMWH.展开更多
Fins are extensively utilized in heat exchangers and various industrial applications as they are lightweight and can benefit in various systems,including electronic cooling devices and automotive components,owing to t...Fins are extensively utilized in heat exchangers and various industrial applications as they are lightweight and can benefit in various systems,including electronic cooling devices and automotive components,owing to their adaptable design.Furthermore,spine fins are introduced to improve performance in applications such as automotive radiators.They can be shaped in different ways and constructed from a collection of materials.Inspired by this,the present model examines the effects of internal heat generation and radiation-convection on the thermal distribution in a wetted convex-shaped spine fin.Using dimensionless terms,the proposed fin model involving a governing nonlinear ordinary differential equation(ODE)is transformed into a dimensionless form.The study uses the operational matrix with the Charlier polynomial collocation method(OMCCM)to ensure precise and computationally efficient numerical solutions for the dimensionless equation.In order to aid in the analysis of thermal performance,the importance of major parameters on the temperature profile is graphically illustrated.The main outcome of the study reveals that as the radiation-conductive,wet,and convective-conductive parameters increase,the heat transfer rate progressively improves.Conversely,the ambient temperature and internal heat generation parameters show an inverse relationship.展开更多
Boundary layer stagnation point flow of Casson fluid over a Riga plate of variable thickness is investigated in present article. Riga plate is an electromagnetic actuator consists of enduring magnets and gyrated align...Boundary layer stagnation point flow of Casson fluid over a Riga plate of variable thickness is investigated in present article. Riga plate is an electromagnetic actuator consists of enduring magnets and gyrated aligned array of alternating electrodes mounted on a plane surface. Physical problem is modeled and simplified under appropriate transformations. Effects of thermal radiation and viscous dissipation are incorporated. These differential equations are solved by Keller Box Scheme using MATLAB. Comparison is given with shooting techniques along with RangeKutta Fehlberg method of order 5. Graphical and tabulated analysis is drawn. The results reveal that Eckert number,radiation and fluid parameters enhance temperature whereas they contribute in lowering rate of heat transfer. The numerical outcomes of present analysis depicts that Keller Box Method is capable and consistent to solve proposed nonlinear problem with high accuracy.展开更多
[Objectives]To explore the effects of heat clearing and stasis resolving method on prethrombotic state,inflammatory factors and T-lymphocyte subsets in peripheral blood of unexplained recurrent miscarriage(URM)patient...[Objectives]To explore the effects of heat clearing and stasis resolving method on prethrombotic state,inflammatory factors and T-lymphocyte subsets in peripheral blood of unexplained recurrent miscarriage(URM)patients with suppressed internal heat.[Methods]Thirty cases of URM patients with suppressed internal heat and 30 normal women were collected,and characteristics of changes in peripheral serum D-dimer(D-D),fibrin degradation product(FDP),fibrinogen(FIB),IL-6,IL-10 and TNF-α,CD,CD,CD,CD,CDlevels were detected.URM patients were treated with traditional Chinese medicine for clearing heat and resolving blood stasis for 3 menstrual cycles,and the changes of indicators before and after treatment were observed.[Results]Compared with normal women,the peripheral serum levels of D-D,IL-6,TNF-αand CDin URM patients with suppressed internal heat were increased(P<0.05),while the IL-10 lymphocyte level was significantly decreased(P<0.05);compared with that before treatment,the contents of D-D,IL-6,TNF-αand CDdecreased after 3 menstrual cycles(P<0.05),while the contents of IL-10 and CDT lymphocytes increased significantly(P<0.05).[Conclusions]The heat clearing heat and stasis resolving method can effectively improve the prethrombotic state of URM,and the action mechanism may be related to the regulation of immune and peripheral blood inflammatory factors.展开更多
In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the re...In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the reactive section is explored based on a hypothetical ideal reactive distillation system containing an exothermic reaction:A + BC + D.Steady state operation analysis and closed-loop controllability evaluation are carried out by comparing the process designs with and without the consideration of internal heat integration.For superposing reactive section onto stripping section,favorable effect is aroused due to its low sensitivities to the changes in operating condition.For ascending the lower feed stage,somewhat detrimental effect occurs because of the accompanied adverse internal heat integration and strong sensitivity to the changes in operating condition.For descending the upper feed stage,serious detrimental effect happens because of the introduced adverse internal heat integration and strong sensitivity to the changes in operating condition.For redistributing catalyst in the reactive section,fairly small negative influence is aroused by the sensitivity to the changes in operating condition.When reinforcing internal heat integration with a combinatorial use of these three strategies,the decent of the upper feed stage should be avoided in process development.Although the conclusions are derived based on the hypothetical ideal reactive distillation column studied,they are considered to be of general significance to the design and operation of other reactive distillation columns.展开更多
The theoretical and numerical analysis is carried out on the effect of three types of configurations of Rayleigh-Bénard (RB) convection driven by the boundary combinations of Rigid-Rigid (R-R), Rigid-Free (R-F) a...The theoretical and numerical analysis is carried out on the effect of three types of configurations of Rayleigh-Bénard (RB) convection driven by the boundary combinations of Rigid-Rigid (R-R), Rigid-Free (R-F) and Free-Free (F-F). The RB convection models are distinguished by the three different temperature boundary conditions like: 1) RB1: lower and upper at fixed-temperature, 2) RB2: lower and upper with fixed-heat flux, or perfectly insulating and 3) RB3: bottom surface is fixed-temperature and top surface is fixed-heat flux. A Galerkin-type is based on the weighted residual method (WRM) which has been used to obtain the eigenvalue for gravity thermal Rayleigh number. It is noted that the porous medium of Darcy parameter <img alt="" src="Edit_ba52bac5-73fb-46dc-87b2-9ab918cb67c9.bmp" /> and spin diffusion (couple stress) parameter <em>N</em><sub>3</sub> is to hasten coupling parameter <em style="white-space:normal;">N</em><sub style="white-space:normal;">1 </sub>and micropolar heat conduction parameter <em style="white-space:normal;">N</em><sub style="white-space:normal;">5</sub> is to delay the onset of convection. Further, increase in the value of <em style="white-space:normal;">N</em><sub style="white-space:normal;">1</sub>, <em style="white-space:normal;">N</em><sub style="white-space:normal;">5</sub>, <img alt="" src="Edit_2d2de547-a7ed-4351-b3c4-8d1c36d83a20.bmp" /> and as well as decrease in <em style="white-space:normal;">N</em><sub style="white-space:normal;">3</sub> is to diminish the size of convection cells.展开更多
In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the...In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the fin heat dissipating capacity but the internal heat generation decreases the heat enhancement capacity of extended surface.Also,it is established that when the internal heat parameter increases to some certain values,some negative effects are recorded where the fin stores heat rather than dissipating it.This scenario defeats the prime purpose of the cooling fin.Additionally,it is established in the present study that the limiting value of porosity parameter for thermal stability for the passive device increases as internal heat parameter increases.This shows that although the internal heat parameter can help assist higher range and value of thermal stability of the fin,it produces negative effect which greatly defeats the ultimate purpose of the fin.The results in the work will help in fin design for industrial applications where internal heat generation is involved.展开更多
Every year on 22 April, we have celebrated Earth Day and the beautiful planet we call home. Earth Day, established in 1970, has been used to highlight our planet’s environmental challenges and raise awareness of the ...Every year on 22 April, we have celebrated Earth Day and the beautiful planet we call home. Earth Day, established in 1970, has been used to highlight our planet’s environmental challenges and raise awareness of the importance of protecting our world for future generations [1]. To provide the protection of our planet, we should explain Earth’s environmental challenges to the best of our knowledge in frames of contemporary Geophysics. This paper gives a short overview of the developed Hypersphere World-Universe Model (WUM) and pay particular attention to the principal role of Dark Matter (DM) in the Earth’s life. In this manuscript, we discuss different aspects of the Earth: a condition of Young Earth before the Beginning of life on It;Internal Structure;“The 660-km Boundary” that we named Geomagma;Random Variations of Earth’s Rotational Speed on a daily basis;Origin of Moon;Expanding Earth;Internal Heating;Faint Young Sun paradox;Geocorona and Planetary Coronas;High-Energy Atmospheric Physics. WUM proposed principally different ways to solve the problems of Internal Heating, Origin of the Moon, and Faint Young Sun paradox based on DM core of the Earth. The Model revealed the fact that the Sun Activity causes the Geomagma Activity and, as a consequence, Random Variations of Earth’s Rotational Speed by the varying Sun’s magnetic field.展开更多
The selection of working fluid significantly impacts the geothermal ORC’s Efficiency.Using a mixture as a working fluid is a strategy to improve the output of geothermal ORC.In the current study,modelling and thermod...The selection of working fluid significantly impacts the geothermal ORC’s Efficiency.Using a mixture as a working fluid is a strategy to improve the output of geothermal ORC.In the current study,modelling and thermodynamic analysis of ORC,using geothermal as a heat source,is carried out at fixed operating conditions.The model is simulated in the Engineering Equation Solver(EES).An environment-friendly mixture of fluids,i.e.,R245fa/R600a,with a suitable mole fraction,is used as the operating fluid.The mixture provided the most convenient results compared to the pure working fluid under fixed operating conditions.The impact of varying the evaporator pressure on the performance parameters,including energy efficiency,exergy efficiency and net power output is investigated.The system provided the optimal performance once the evaporator pressure reached the maximum value.The efficiencies:Energy and Exergy,and Net Power output of the system are 16.62%,64.08%and 2199 kW for the basic cycle and 20.72%,67.76%and 2326 kW respectively for the regenerative cycle.展开更多
The present article has been fine-tuned with the investigation of mixed convection Darcy-Forchheimer flow of ZnO-SAE50 oil nanolubricant over an inclined rotating disk under the influence of uniform applied magnetic f...The present article has been fine-tuned with the investigation of mixed convection Darcy-Forchheimer flow of ZnO-SAE50 oil nanolubricant over an inclined rotating disk under the influence of uniform applied magnetic field applied to various industries.The current study has been enriched with additional consideration of slip flow,thermal radiation,viscous dissipation,Joulian dissipation and internal heating.In view of augmentation of thermal conductivity of nanolubricant,a new micro-nano-convection model namely Patel model has been invoked.The specialty of this model involves the effects of specific surface area and nano-convection due to Brownian motion of nanoparticles,kinetic theory based micro-convection,liquid layering and particle concentration.Suitably transformed governing equations have been solved numerically by using Runge-Kutta-Fehlberg scheme.An analysis of the present study has shown that applied magnetic field,porosity of the medium,velocity slip and inertia coefficient account for the slowing down of radial as well as tangential flow of ZnO-SAE50 oil nanolubricant,thereby leading to an improvement in velocity and thermal boundary layers.展开更多
In order to improve the efficiency of a geothermal power plant, oil wells in the high water cut stage were used as geothermal wells, thereby improving the recovery ratio and economic benefit. A new function that refle...In order to improve the efficiency of a geothermal power plant, oil wells in the high water cut stage were used as geothermal wells, thereby improving the recovery ratio and economic benefit. A new function that reflects both the technical and economic performances was put forward and used as the objective function. An organic Rankine cycle (ORC) was analyzed through the energetic and exergetic analyses, and the reasons for low efficiency were pinpointed. Results indicate that geothermal water directly transferring heat to the working fluid reduces energy dissipation and increases cycle efficiencies. The net power output with an internal heat exchanger (IHE) is averagely 5.3% higher than that without an IHE. R601a and R601 can be used to replace R123 for geothermal water below 110℃. Moreover, the modified ORC dramatically outperforms the actual one.展开更多
A series of monotonic tensile experiments of thermo-induced shape memory polyurethane （TSMPU） at different loading rates were carried out to investigate the interaction between the internal heat production and the m...A series of monotonic tensile experiments of thermo-induced shape memory polyurethane （TSMPU） at different loading rates were carried out to investigate the interaction between the internal heat production and the mechanical deformation. It is shown that the tem- perature variation on the surfaces of the specimens due to the internal heat production affects the mechanical properties of TSMPU remarkably. Then, based on irreversible thermodynamics, the Helmholtz free energy was decomposed into three parts, i.e., the instantaneous elastic free energy, visco-plastic free energy and heat free energy. The total deformation gradient was decomposed into the mechanical and thermal parts, and the mechanical deformation gradient was further divided into the elastic and visco-plastic components. The Hencky＇s logarithmic strain was used in the current configuration. The heat equilibrium equation of internal heat production and heat exchange was derived in accordance with the first and second thermodynamics laws. The temperature of specimens was contributed by the internal heat production and the ambient temperature simultaneously, and a thermo-mechanically coupled thermo-elasto-visco-plastie model was established. The effect of temperature variation of specimens on the mechanical properties of the material was considered in this work. Finally, the capability of the proposed model was validated by comparing the simulated results with the corresponding experimental data of TSMPU.展开更多
Methylcyclohexane(MCH)serves as an ideal hydrogen carrier in hydrogen storage and transportation process.In the continuous production of hydrogen from MCH dehydrogenation,the rational design of energy-efficient cataly...Methylcyclohexane(MCH)serves as an ideal hydrogen carrier in hydrogen storage and transportation process.In the continuous production of hydrogen from MCH dehydrogenation,the rational design of energy-efficient catalytic way with good performance remains an enormous challenge.Herein,an internal electric heating(IEH)assisted mode was designed and proposed by the directly electrical-driven catalyst using the resistive heating effect.The Pt/Al2O_(3)on Fe foam(Pt/Al2O_(3)/FF)with unique threedimensional network structure was constructed.The catalysts were studied in a comprehensive way including X-ray diffraction(XRD),scanning electron microscopy(SEM)-mapping,in situ extended X-ray absorption fine structure(EXAFS),and in situ COFourier transform infrared(FTIR)measurements.It was found that the hydrogen evolution rate in IEH mode can reach up to above 2060 mmol·gPt^(−1)·min^(−1),which is 2–5 times higher than that of reported Pt based catalysts under similar reaction conditions in conventional heating(CH)mode.In combination with measurements from high-resolution infrared thermometer,the equations of heat transfer rate,and reaction heat analysis results,the Pt/Al2O_(3)/FF not only has high mass and heat transfer ability to promote catalytic performance,but also behaves as the heating component with a low thermal resistance and heat capacity offering a fast temperature response in IEH mode.In addition,the chemical adsorption and activation of MCH molecules can be efficiently facilitated by IEH mode,proved by the operando MCH-FTIR results.Therefore,the as-developed IEH mode can efficiently reduce the heat and mass transfer limitations and prominently boost the dehydrogenation performance,which has a broad application potential in hydrogen storage and other catalytic reaction processes.展开更多
The present paper is concerned with the wave propagation in a micropolar thermoelastic solid with distinct two temperatures under the effect of the magnetic field in the presence of the gravity field and an internal h...The present paper is concerned with the wave propagation in a micropolar thermoelastic solid with distinct two temperatures under the effect of the magnetic field in the presence of the gravity field and an internal heat source.The formulation of the problem is applied in the context of the three-phase-lag model and Green-Naghdi theory without dissipation.The medium is a homogeneous isotropic thermoelastic in the half-space.The exact expressions of the considered variables are obtained by using normal mode analysis.Comparisons are made with the results in the two theories in the absence and presence of the magnetic field as well as the two-temperature parameter.A comparison is also made in the two theories for different values of an internal heat source.展开更多
To improve the coefficient of performance （COP） of CO2 transcritical reverse cycle and determine the most efficient cycle, comparison analysis on （single-and） two-stage CO2 transcritical cycles with internal heat ...To improve the coefficient of performance （COP） of CO2 transcritical reverse cycle and determine the most efficient cycle, comparison analysis on （single-and） two-stage CO2 transcritical cycles with internal heat exchanger （IHX） or expander is presented adopting the principle of thermodynamics. Results indicate that the COP of four cycles,namely single-stage compression with IHX （SI）, single-stage compression with expander （SE）, two-stage compression with IHX （TI） and two-stage compression with expander （TE）, can be ranged as TE>SE>TI>SI. It presents that adopting an expander to recover expansion power is the primary method to improve the COP of CO2 transcritical reverse cycle if the efficiency of the expander is up to a certain value. Under supposed operating condition, where the outlet temperature of gas cooler is 35 ℃ and the evaporating temperature is 5 ℃, the COP of TE cycle is about 4200 higher than that of SI cycle when the expander efficiency is 0.6 and the degree of superheat of IHX is 15 ℃. Therefore TE cycle is the most recommendatory one and it is better to adopt TE in those high-cooling capacity systems because its technology cost will be higher.展开更多
Heat and mass transfer effects in three-dimensional flow of Maxwell fluid over a stretching surface were addressed.Analysis was performed in the presence of internal heat generation/absorption. Concentration and therm...Heat and mass transfer effects in three-dimensional flow of Maxwell fluid over a stretching surface were addressed.Analysis was performed in the presence of internal heat generation/absorption. Concentration and thermal buoyancy effects were accounted. Convective boundary conditions for heat and mass transfer analysis were explored. Series solutions of the resulting problem were developed. Effects of mixed convection, internal heat generation/absorption parameter and Biot numbers on the dimensionless velocity, temperature and concentration distributions were illustrated graphically. Numerical values of local Nusselt and Sherwood numbers were obtained and analyzed for all the physical parameters. It is found that both thermal and concentration boundary layer thicknesses are decreasing functions of stretching ratio. Variations of mixed convection parameter and concentration buoyancy parameter on the velocity profiles and associated boundary layer thicknesses are enhanced. Velocity profiles and temperature increase in the case of internal heat generation while they reduce for heat absorption. Heat transfer Biot number increases the thermal boundary layer thickness and temperature. Also concentration and its associated boundary layer are enhanced with an increase in mass transfer Biot number. The local Nusselt and Sherwood numbers have quite similar behaviors for increasing values of mixed convection parameter, concentration buoyancy parameter and Deborah number.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.92252202,92152301,12293000,12293002,12302320,and 12388101)the Fundamental Research Funds for the Central Universities.
文摘Convection driven by a spatially non-uniform internal heat source between two horizontal isothermal walls is studied by theoretical analysis and numerical simulation,in order to explore the bounds of the temperature and the vertical heat flux.Specifically,the rigorous lower bound of the weighted average temperature<QT>is derived analytically,by decomposing the temperature field into a background profile and a fluctuation part.This bound obtained for the first time to consider non-uniform heat sources is found to be compatible with the existing bound obtained in uniform internal heat convection.Of physical importance,an analytical relationship is derived as an inequality connecting<QT>and the average vertical heat flux<wT>,by employing the average heat flux on the bottom wall(qb)as an intermediary variable.It clarifies the intrinsic relation between the lower bound of<QT>and the upper bound of<wT>,namely,these two bounds are essentially equivalent providing an easy way to obtain one from another.Furthermore,the analytical bounds are extensively demonstrated through a comprehensive series of direct numerical simulations.
文摘This theoretical study investigates the microrotation effects on mixed convection flow induced by a stretching sheet. Casson fluid model along with microrotation is considered to model the governing flow problem. The system is assumed to undergo internal heating phenomenon. The governing physical problem is transformed into system of nonlinear ordinary differential equations using scaling group of transformations. These equations are solved numerically using Runge Kutta Fehlberg scheme coupled with shooting technique. Influence of sundry parameters for the case of strong and weak concentration of microelements on velocity, temperature, skin friction and local heat flux at the surface are computed and discussed. Lower skin friction and heat flux is observed for the case of weak concentration(n = 0.5)compared to strong concentration of microelements(n = 0.0) near the wall.
文摘The present work aims to investigate transverse Oldroyd-B nanofluid flow on a stretched panel with consideration of internal heat generation. Buongiorno model is utilized to study influence of thermophoresis and Brownian motion effects. A numerical procedure known as Keller box algorithm is used to solve the governed physical model.Graphically velocity, temperature and concentration of nanoparticles are expressed. Also, concerned physical measures such as heat and mass transfer are investigated numerically. The simulations performed revealed that fluid parameters play a significant role in heat transfer under Brownian motion and thermophoresis effects. Local heat flux is elevated while local mass flux is suppressed with enhancing Brownian motion parameter. Streamlines pattern exhibits that flow is more inclined in the presence of Deborah number effects. To the best of our knowledge, transverse flow of an Oldroyd-B type fluid which incorporates the thermal relaxation effects has never been reported before in the presence of Brownian motion and internal heating phenomenon. Therefore we intend to discuss these features in detail. The obtained results are a novel contribution, which can be benchmark for further relevant academic research related to polymer industry.
文摘The aim of this investigation is to analyze the effectiveness of Lorentz force, viscous dissipation and internal heating on the heat and flow characteristics of a non-Newtonian Casson fluid thin film resting on a stretching surface under the influence of a magnetic field. Employing suitable similarity variables and shooting technique and integrating scheme numerical solutions for velocity and temperature are obtained. The results of this analysis are compared with the published work and are found to be in good agreement. The thickness of the thin film is evaluated and is observed that Lorentz force and the non-Newtonian nature of the fluid have a thinning influence on the film. Velocity and temperature distributions in the thin film are discussed for various flow parameters.
文摘The aim of this paper was to characterize through experiment the moisture and temperature kinetic behavior of Eucalyptus gomphocephala wood samples using microwave heating(MWH)in two scenarios:intermittently and continuously.The mechanical properties and surface appearance of the heated samples were also investigated.Continuous and intermittent microwave drying kinetic experiments were conducted at a frequency of 2.45 GHz using a microwave laboratory oven at 300,500,and 1000 watts.Drying rate curves indicated three distinct phases of MWH.Increasing the microwave power with a shorter drying time led to rapid increases in internal temperature and water evaporation rates of the heated samples.Mechanical results indicated that samples heated under continuous MW(Microwave)power at 300 watts had a modulus of rupture(MOR)and modulus of elasticity(MOE)in three static bending tests higher than 29%and 36%,respectively,than samples heated at 1000 watts.Intermittent microwave heating(IMWH)of samples at 300 and 1000 watts produced the highest MOR and MOE values of 31%and 51%,respectively,unlike those heated under continuous microwave heating(CMWH).External qualitative observation showed that samples heated at high microwave power had severe surface checks.These defects were missing when using IMWH.An analysis of variance(ANOVA)showed that mechanical properties were linked to both microwave power level and the heating scenario,except for MOR in axial compression under CMWH.
基金the Deanship of Research and Graduate Studies at King Khalid University for funding this work through Large Research Project under grant number RGP2/308/46。
文摘Fins are extensively utilized in heat exchangers and various industrial applications as they are lightweight and can benefit in various systems,including electronic cooling devices and automotive components,owing to their adaptable design.Furthermore,spine fins are introduced to improve performance in applications such as automotive radiators.They can be shaped in different ways and constructed from a collection of materials.Inspired by this,the present model examines the effects of internal heat generation and radiation-convection on the thermal distribution in a wetted convex-shaped spine fin.Using dimensionless terms,the proposed fin model involving a governing nonlinear ordinary differential equation(ODE)is transformed into a dimensionless form.The study uses the operational matrix with the Charlier polynomial collocation method(OMCCM)to ensure precise and computationally efficient numerical solutions for the dimensionless equation.In order to aid in the analysis of thermal performance,the importance of major parameters on the temperature profile is graphically illustrated.The main outcome of the study reveals that as the radiation-conductive,wet,and convective-conductive parameters increase,the heat transfer rate progressively improves.Conversely,the ambient temperature and internal heat generation parameters show an inverse relationship.
文摘Boundary layer stagnation point flow of Casson fluid over a Riga plate of variable thickness is investigated in present article. Riga plate is an electromagnetic actuator consists of enduring magnets and gyrated aligned array of alternating electrodes mounted on a plane surface. Physical problem is modeled and simplified under appropriate transformations. Effects of thermal radiation and viscous dissipation are incorporated. These differential equations are solved by Keller Box Scheme using MATLAB. Comparison is given with shooting techniques along with RangeKutta Fehlberg method of order 5. Graphical and tabulated analysis is drawn. The results reveal that Eckert number,radiation and fluid parameters enhance temperature whereas they contribute in lowering rate of heat transfer. The numerical outcomes of present analysis depicts that Keller Box Method is capable and consistent to solve proposed nonlinear problem with high accuracy.
基金Supported by National Natural Science Foundation of China(81760806)Project of Traditional Chinese Medicine Administration of Gansu Province(GZK-2019-28)Innovation Ability Improvement Project of Higher Education Institutions of Gansu Province(2019B-103)。
文摘[Objectives]To explore the effects of heat clearing and stasis resolving method on prethrombotic state,inflammatory factors and T-lymphocyte subsets in peripheral blood of unexplained recurrent miscarriage(URM)patients with suppressed internal heat.[Methods]Thirty cases of URM patients with suppressed internal heat and 30 normal women were collected,and characteristics of changes in peripheral serum D-dimer(D-D),fibrin degradation product(FDP),fibrinogen(FIB),IL-6,IL-10 and TNF-α,CD,CD,CD,CD,CDlevels were detected.URM patients were treated with traditional Chinese medicine for clearing heat and resolving blood stasis for 3 menstrual cycles,and the changes of indicators before and after treatment were observed.[Results]Compared with normal women,the peripheral serum levels of D-D,IL-6,TNF-αand CDin URM patients with suppressed internal heat were increased(P<0.05),while the IL-10 lymphocyte level was significantly decreased(P<0.05);compared with that before treatment,the contents of D-D,IL-6,TNF-αand CDdecreased after 3 menstrual cycles(P<0.05),while the contents of IL-10 and CDT lymphocytes increased significantly(P<0.05).[Conclusions]The heat clearing heat and stasis resolving method can effectively improve the prethrombotic state of URM,and the action mechanism may be related to the regulation of immune and peripheral blood inflammatory factors.
基金Supported by the National Natural Science Foundation of China(21076015,21376018,21576014)the Fundamental Research Funds for the Central Universities(ZY1503)
文摘In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the reactive section is explored based on a hypothetical ideal reactive distillation system containing an exothermic reaction:A + BC + D.Steady state operation analysis and closed-loop controllability evaluation are carried out by comparing the process designs with and without the consideration of internal heat integration.For superposing reactive section onto stripping section,favorable effect is aroused due to its low sensitivities to the changes in operating condition.For ascending the lower feed stage,somewhat detrimental effect occurs because of the accompanied adverse internal heat integration and strong sensitivity to the changes in operating condition.For descending the upper feed stage,serious detrimental effect happens because of the introduced adverse internal heat integration and strong sensitivity to the changes in operating condition.For redistributing catalyst in the reactive section,fairly small negative influence is aroused by the sensitivity to the changes in operating condition.When reinforcing internal heat integration with a combinatorial use of these three strategies,the decent of the upper feed stage should be avoided in process development.Although the conclusions are derived based on the hypothetical ideal reactive distillation column studied,they are considered to be of general significance to the design and operation of other reactive distillation columns.
文摘The theoretical and numerical analysis is carried out on the effect of three types of configurations of Rayleigh-Bénard (RB) convection driven by the boundary combinations of Rigid-Rigid (R-R), Rigid-Free (R-F) and Free-Free (F-F). The RB convection models are distinguished by the three different temperature boundary conditions like: 1) RB1: lower and upper at fixed-temperature, 2) RB2: lower and upper with fixed-heat flux, or perfectly insulating and 3) RB3: bottom surface is fixed-temperature and top surface is fixed-heat flux. A Galerkin-type is based on the weighted residual method (WRM) which has been used to obtain the eigenvalue for gravity thermal Rayleigh number. It is noted that the porous medium of Darcy parameter <img alt="" src="Edit_ba52bac5-73fb-46dc-87b2-9ab918cb67c9.bmp" /> and spin diffusion (couple stress) parameter <em>N</em><sub>3</sub> is to hasten coupling parameter <em style="white-space:normal;">N</em><sub style="white-space:normal;">1 </sub>and micropolar heat conduction parameter <em style="white-space:normal;">N</em><sub style="white-space:normal;">5</sub> is to delay the onset of convection. Further, increase in the value of <em style="white-space:normal;">N</em><sub style="white-space:normal;">1</sub>, <em style="white-space:normal;">N</em><sub style="white-space:normal;">5</sub>, <img alt="" src="Edit_2d2de547-a7ed-4351-b3c4-8d1c36d83a20.bmp" /> and as well as decrease in <em style="white-space:normal;">N</em><sub style="white-space:normal;">3</sub> is to diminish the size of convection cells.
文摘In this study,the impacts of internal heat generation on heat transfer enhancement of porous fin is theoretical investigated using differential transform method.The parametric studies reveal that porosity enhances the fin heat dissipating capacity but the internal heat generation decreases the heat enhancement capacity of extended surface.Also,it is established that when the internal heat parameter increases to some certain values,some negative effects are recorded where the fin stores heat rather than dissipating it.This scenario defeats the prime purpose of the cooling fin.Additionally,it is established in the present study that the limiting value of porosity parameter for thermal stability for the passive device increases as internal heat parameter increases.This shows that although the internal heat parameter can help assist higher range and value of thermal stability of the fin,it produces negative effect which greatly defeats the ultimate purpose of the fin.The results in the work will help in fin design for industrial applications where internal heat generation is involved.
文摘Every year on 22 April, we have celebrated Earth Day and the beautiful planet we call home. Earth Day, established in 1970, has been used to highlight our planet’s environmental challenges and raise awareness of the importance of protecting our world for future generations [1]. To provide the protection of our planet, we should explain Earth’s environmental challenges to the best of our knowledge in frames of contemporary Geophysics. This paper gives a short overview of the developed Hypersphere World-Universe Model (WUM) and pay particular attention to the principal role of Dark Matter (DM) in the Earth’s life. In this manuscript, we discuss different aspects of the Earth: a condition of Young Earth before the Beginning of life on It;Internal Structure;“The 660-km Boundary” that we named Geomagma;Random Variations of Earth’s Rotational Speed on a daily basis;Origin of Moon;Expanding Earth;Internal Heating;Faint Young Sun paradox;Geocorona and Planetary Coronas;High-Energy Atmospheric Physics. WUM proposed principally different ways to solve the problems of Internal Heating, Origin of the Moon, and Faint Young Sun paradox based on DM core of the Earth. The Model revealed the fact that the Sun Activity causes the Geomagma Activity and, as a consequence, Random Variations of Earth’s Rotational Speed by the varying Sun’s magnetic field.
文摘The selection of working fluid significantly impacts the geothermal ORC’s Efficiency.Using a mixture as a working fluid is a strategy to improve the output of geothermal ORC.In the current study,modelling and thermodynamic analysis of ORC,using geothermal as a heat source,is carried out at fixed operating conditions.The model is simulated in the Engineering Equation Solver(EES).An environment-friendly mixture of fluids,i.e.,R245fa/R600a,with a suitable mole fraction,is used as the operating fluid.The mixture provided the most convenient results compared to the pure working fluid under fixed operating conditions.The impact of varying the evaporator pressure on the performance parameters,including energy efficiency,exergy efficiency and net power output is investigated.The system provided the optimal performance once the evaporator pressure reached the maximum value.The efficiencies:Energy and Exergy,and Net Power output of the system are 16.62%,64.08%and 2199 kW for the basic cycle and 20.72%,67.76%and 2326 kW respectively for the regenerative cycle.
文摘The present article has been fine-tuned with the investigation of mixed convection Darcy-Forchheimer flow of ZnO-SAE50 oil nanolubricant over an inclined rotating disk under the influence of uniform applied magnetic field applied to various industries.The current study has been enriched with additional consideration of slip flow,thermal radiation,viscous dissipation,Joulian dissipation and internal heating.In view of augmentation of thermal conductivity of nanolubricant,a new micro-nano-convection model namely Patel model has been invoked.The specialty of this model involves the effects of specific surface area and nano-convection due to Brownian motion of nanoparticles,kinetic theory based micro-convection,liquid layering and particle concentration.Suitably transformed governing equations have been solved numerically by using Runge-Kutta-Fehlberg scheme.An analysis of the present study has shown that applied magnetic field,porosity of the medium,velocity slip and inertia coefficient account for the slowing down of radial as well as tangential flow of ZnO-SAE50 oil nanolubricant,thereby leading to an improvement in velocity and thermal boundary layers.
基金Project(2012AA052804) supported by the National High Technology Research and Development Program of China
文摘In order to improve the efficiency of a geothermal power plant, oil wells in the high water cut stage were used as geothermal wells, thereby improving the recovery ratio and economic benefit. A new function that reflects both the technical and economic performances was put forward and used as the objective function. An organic Rankine cycle (ORC) was analyzed through the energetic and exergetic analyses, and the reasons for low efficiency were pinpointed. Results indicate that geothermal water directly transferring heat to the working fluid reduces energy dissipation and increases cycle efficiencies. The net power output with an internal heat exchanger (IHE) is averagely 5.3% higher than that without an IHE. R601a and R601 can be used to replace R123 for geothermal water below 110℃. Moreover, the modified ORC dramatically outperforms the actual one.
基金Financial supports by National Natural Science Foundation of China (11572265,11202171)Excellent Youth Found of Sichuan Province (2017JQ0019)+1 种基金Open Project of Traction Power State Key Laboratory(TPL1606)Exploration Project of Traction Power State Key Laboratory (2017TPL_T04)
文摘A series of monotonic tensile experiments of thermo-induced shape memory polyurethane （TSMPU） at different loading rates were carried out to investigate the interaction between the internal heat production and the mechanical deformation. It is shown that the tem- perature variation on the surfaces of the specimens due to the internal heat production affects the mechanical properties of TSMPU remarkably. Then, based on irreversible thermodynamics, the Helmholtz free energy was decomposed into three parts, i.e., the instantaneous elastic free energy, visco-plastic free energy and heat free energy. The total deformation gradient was decomposed into the mechanical and thermal parts, and the mechanical deformation gradient was further divided into the elastic and visco-plastic components. The Hencky＇s logarithmic strain was used in the current configuration. The heat equilibrium equation of internal heat production and heat exchange was derived in accordance with the first and second thermodynamics laws. The temperature of specimens was contributed by the internal heat production and the ambient temperature simultaneously, and a thermo-mechanically coupled thermo-elasto-visco-plastie model was established. The effect of temperature variation of specimens on the mechanical properties of the material was considered in this work. Finally, the capability of the proposed model was validated by comparing the simulated results with the corresponding experimental data of TSMPU.
基金the National Natural Science Foundation of China(Nos.22225807,21961132026,21878331,22021004,and 22109177)the National Key Research and Development Program(Nos.2020YFA0210903 and 2021YFA1501304)+4 种基金the PetroChina research institute of petroleum processing program(Nos.PRIKY21057 and PRIKY 21199)the Fundamental Research Funds for the Central Universities(No.2462020BJRC008)the support of Energy Internet Research Center,China University of Petroleum(Beijing),Haihe Laboratory of Sustainable Chemical Transformations(No.CYZC202105)the Beijing Synchrotron Radiation Facility(BSRF)Shanghai Synchrotron Radiation Facility(SSRF)during the XAFS measurements at the beamline of 1W1B,1W2B,and BL11B.
文摘Methylcyclohexane(MCH)serves as an ideal hydrogen carrier in hydrogen storage and transportation process.In the continuous production of hydrogen from MCH dehydrogenation,the rational design of energy-efficient catalytic way with good performance remains an enormous challenge.Herein,an internal electric heating(IEH)assisted mode was designed and proposed by the directly electrical-driven catalyst using the resistive heating effect.The Pt/Al2O_(3)on Fe foam(Pt/Al2O_(3)/FF)with unique threedimensional network structure was constructed.The catalysts were studied in a comprehensive way including X-ray diffraction(XRD),scanning electron microscopy(SEM)-mapping,in situ extended X-ray absorption fine structure(EXAFS),and in situ COFourier transform infrared(FTIR)measurements.It was found that the hydrogen evolution rate in IEH mode can reach up to above 2060 mmol·gPt^(−1)·min^(−1),which is 2–5 times higher than that of reported Pt based catalysts under similar reaction conditions in conventional heating(CH)mode.In combination with measurements from high-resolution infrared thermometer,the equations of heat transfer rate,and reaction heat analysis results,the Pt/Al2O_(3)/FF not only has high mass and heat transfer ability to promote catalytic performance,but also behaves as the heating component with a low thermal resistance and heat capacity offering a fast temperature response in IEH mode.In addition,the chemical adsorption and activation of MCH molecules can be efficiently facilitated by IEH mode,proved by the operando MCH-FTIR results.Therefore,the as-developed IEH mode can efficiently reduce the heat and mass transfer limitations and prominently boost the dehydrogenation performance,which has a broad application potential in hydrogen storage and other catalytic reaction processes.
文摘The present paper is concerned with the wave propagation in a micropolar thermoelastic solid with distinct two temperatures under the effect of the magnetic field in the presence of the gravity field and an internal heat source.The formulation of the problem is applied in the context of the three-phase-lag model and Green-Naghdi theory without dissipation.The medium is a homogeneous isotropic thermoelastic in the half-space.The exact expressions of the considered variables are obtained by using normal mode analysis.Comparisons are made with the results in the two theories in the absence and presence of the magnetic field as well as the two-temperature parameter.A comparison is also made in the two theories for different values of an internal heat source.
文摘To improve the coefficient of performance （COP） of CO2 transcritical reverse cycle and determine the most efficient cycle, comparison analysis on （single-and） two-stage CO2 transcritical cycles with internal heat exchanger （IHX） or expander is presented adopting the principle of thermodynamics. Results indicate that the COP of four cycles,namely single-stage compression with IHX （SI）, single-stage compression with expander （SE）, two-stage compression with IHX （TI） and two-stage compression with expander （TE）, can be ranged as TE>SE>TI>SI. It presents that adopting an expander to recover expansion power is the primary method to improve the COP of CO2 transcritical reverse cycle if the efficiency of the expander is up to a certain value. Under supposed operating condition, where the outlet temperature of gas cooler is 35 ℃ and the evaporating temperature is 5 ℃, the COP of TE cycle is about 4200 higher than that of SI cycle when the expander efficiency is 0.6 and the degree of superheat of IHX is 15 ℃. Therefore TE cycle is the most recommendatory one and it is better to adopt TE in those high-cooling capacity systems because its technology cost will be higher.
文摘Heat and mass transfer effects in three-dimensional flow of Maxwell fluid over a stretching surface were addressed.Analysis was performed in the presence of internal heat generation/absorption. Concentration and thermal buoyancy effects were accounted. Convective boundary conditions for heat and mass transfer analysis were explored. Series solutions of the resulting problem were developed. Effects of mixed convection, internal heat generation/absorption parameter and Biot numbers on the dimensionless velocity, temperature and concentration distributions were illustrated graphically. Numerical values of local Nusselt and Sherwood numbers were obtained and analyzed for all the physical parameters. It is found that both thermal and concentration boundary layer thicknesses are decreasing functions of stretching ratio. Variations of mixed convection parameter and concentration buoyancy parameter on the velocity profiles and associated boundary layer thicknesses are enhanced. Velocity profiles and temperature increase in the case of internal heat generation while they reduce for heat absorption. Heat transfer Biot number increases the thermal boundary layer thickness and temperature. Also concentration and its associated boundary layer are enhanced with an increase in mass transfer Biot number. The local Nusselt and Sherwood numbers have quite similar behaviors for increasing values of mixed convection parameter, concentration buoyancy parameter and Deborah number.
