Herein,a reusable and portable surface-enhanced Raman spectroscopy(SERS)sandpaper was successfully synthesized for the sensitive detection of S-fenvalerate in foods.Commercial sandpapers were decorated with Ag@SiO2@Au...Herein,a reusable and portable surface-enhanced Raman spectroscopy(SERS)sandpaper was successfully synthesized for the sensitive detection of S-fenvalerate in foods.Commercial sandpapers were decorated with Ag@SiO2@Au nanoarrays via a liquid-liquid interface self-assembly method.The capacity of sandpaper to float directly on the cyclohexane-water interface allows nanoarrays to be formed directly on it,thereby minimizing stacking issues typically associated with nanoarray assemblies and significantly enhancing the sensitivity of S-fenvalerate detection.Moreover,the SERS sandpaper was reusable and portable due to its strong adhesion of the nanoarrays.Under optimized testing conditions,the developed SERS sandpaper method was capable of detecting S-fenvalerate,demonstrating a strong linear response within a concentration range of 10^(–7)–10^(3)μmol/L,with a limit of detection of 1.92×10^(−8)μmol/L.The analysis of spiked food samples containing S-fenvalerate using the developed SERS sandpaper afforded excellent recoveries(92.2%−109.7%).Additionally,the SERS sandpaper was successfully applied to quantify S-fenvalerate in real food samples,with results consistent with analyses conducted using gas chromatography.展开更多
This paper presents the extension of the global description approach of a discontinuous function, which is proposed in the previous paper, to a spectral domain decomposition method. This multi-domain spectral immersed...This paper presents the extension of the global description approach of a discontinuous function, which is proposed in the previous paper, to a spectral domain decomposition method. This multi-domain spectral immersed interlace method（IIM） divides the whole computation domain into the smooth and discontinuous parts. Fewer points on the smooth domains are used via taking advantage of the high accuracy property of the spectral method, but more points on the discontinuous domains are employed to enhance the resolution of the calculation. Two that the domain decomposition technique can placed around the discontinuity. The present reached, in spite of the enlarged computational discontinuous problems are tested to verify the present method. The results show reduce the error of the spectral IIM, especially when more collocation points are method is t：avorable for the reason that the same level of the accuracy can be domain.展开更多
Geo-interfaces refer to the contact surfaces between multiple media within geological strata,as well as the transition zones that regulate the migration of three-phase matter,changes in physical states,and the deforma...Geo-interfaces refer to the contact surfaces between multiple media within geological strata,as well as the transition zones that regulate the migration of three-phase matter,changes in physical states,and the deformation and stability of rock and soil masses.Owing to the combined effects of natural factors and human activities,geo-interfaces play crucial roles in the emergence,propagation,and triggering of geological disasters.Over the past three decades,the material point method(MPM)has emerged as a preferred approach for addressing large deformation problems and simulating soil-water-structure interactions,making it an ideal tool for analyzing geo-interface behaviors.In this review,we offer a systematic summary of the basic concepts,classifications,and main characteristics of the geo-interface,and provide a comprehensive overview of recent advances and developments in simulating geo-interface using the MPM.We further present a brief description of various MPMs for modeling different types of geo-interfaces in geotechnical engineering applications and highlight the existing limitations and future research directions.This study aims to facilitate innovative applications of the MPM in modeling complex geo-interface problems,providing a reference for geotechnical practitioners and researchers.展开更多
The diffuse-interface immersed boundary method(IBM)possesses excellent capabilities for simulating flows around complex geometries and moving boundaries.In this method,the flow field is solved on a fixed Cartesian mes...The diffuse-interface immersed boundary method(IBM)possesses excellent capabilities for simulating flows around complex geometries and moving boundaries.In this method,the flow field is solved on a fixed Cartesian mesh,while the solid boundary is discretized into a series of Lagrangian points immersed in the flow field.The boundary condition is implemented by introducing a force term into the momentum equation,and the interaction between the immersed boundary and the fluid domain is achieved via an interpolation process.Over the past decades,the diffuse-interface IBM has gained popularity and spawned many variants,effectively handling a wide range of flow problems from isothermal to thermal flows,from laminar to turbulent flows,and from complex geometries to fluidstructure interaction scenarios.This paper first outlines the basic principles of the diffuse-interface IBM,then highlights recent advancements achieved by the authors’research group,and finally shows the method’s excellent numerical performance and wide applicability through several case studies involving complex moving boundary problems.展开更多
A new simple fictitious domain method, the algebraic immersed interface and boundary (AIIB) method, is presented for elliptic equations with immersed interface conditions. This method allows jump conditions on immerse...A new simple fictitious domain method, the algebraic immersed interface and boundary (AIIB) method, is presented for elliptic equations with immersed interface conditions. This method allows jump conditions on immersed interfaces to be discretized with a good accuracy on a compact stencil. Auxiliary unknowns are created at existing grid locations to increase the degrees of freedom of the initial problem. These auxiliary unknowns allow imposing various constraints to the system on interfaces of complex shapes. For instance, the method is able to deal with immersed interfaces for elliptic equations with jump conditions on the solution or discontinuous coefficients with a second order of spatial accuracy. As the AIIB method acts on an algebraic level and only changes the problem matrix, no particular attention to the initial discretization is required. The method can be easily implemented in any structured grid code and can deal with immersed boundary problems too. Several validation problems are presented to demonstrate the interest and accuracy of the method.展开更多
Depression is increasingly prevalent among adolescents and can profoundly impact their lives.However,the early detection of depression is often hindered by the timeconsuming diagnostic process and the absence of objec...Depression is increasingly prevalent among adolescents and can profoundly impact their lives.However,the early detection of depression is often hindered by the timeconsuming diagnostic process and the absence of objective biomarkers.In this study,we propose a novel approach for depression detection based on an affective brain-computer interface(aBCI)and the resting-state electroencephalogram(EEG).By fusing EEG features associated with both emotional and resting states,our method captures comprehensive depression-related information.The final depression detection model,derived through decision fusion with multiple independent models,further enhances detection efficacy.Our experiments involved 40 adolescents with depression and 40 matched controls.The proposed model achieved an accuracy of 86.54%on cross-validation and 88.20%on the independent test set,demonstrating the efficiency of multi-modal fusion.In addition,further analysis revealed distinct brain activity patterns between the two groups across different modalities.These findings hold promise for new directions in depression detection and intervention.展开更多
The functions,applications,developments and current application mode of IDS3.x system are generally introduced in this paper.Then the development mode of spacecraft based on IDS3.x system is described.The existing pro...The functions,applications,developments and current application mode of IDS3.x system are generally introduced in this paper.Then the development mode of spacecraft based on IDS3.x system is described.The existing problems especially the information redundancy of mechanical interface and their effects are pointed out.A new solution is proposed by developing 3D-IDS system.The central functions of 3D-IDS system are shown in this study.A new application mode of 3D-IDS system is explored and described by showing how to fill in,countersign and apply with 3D-IDS file.The 2D drawing and sketch are removed from 3D-IDS system to avoid information redundancy of mechanical interface.The consistency between 3D model and the parameters of IDS file can be guaranteed by the interface tool.The efficiency of filling in,countersigning and applying,has been improved significantly,which greatly promotes the coordination and total efficiency of spacecraft system design departments and unit design departments.展开更多
A differential geometrical method is for the first time used to calculate the effective moduli of a two-phase elastic composite materials with imperfect interface which the inclusions are assumed to be ellipsoidal of ...A differential geometrical method is for the first time used to calculate the effective moduli of a two-phase elastic composite materials with imperfect interface which the inclusions are assumed to be ellipsoidal of revolutions. All of the interface integral items participating in forming the potential and complementary energy functionals of the composite materials are expressed in terms of intrinsic quantities of the ellipsoidal of revolutions. Based on this, the upper and the lower bound for the effective elastic moduli of the composite materials with inclusions described above have been derived. Under three limiting conditions of sphere, disk and needle shaped inclusions, the results of this paper will return to the bounds obtained by Hashin([6]) (1992).展开更多
In this paper,a class of new immersed interface finite element methods (IIFEM) is developed to solve elasticity interface problems with homogeneous and non-homogeneous jump conditions in two dimensions.Simple non-body...In this paper,a class of new immersed interface finite element methods (IIFEM) is developed to solve elasticity interface problems with homogeneous and non-homogeneous jump conditions in two dimensions.Simple non-body-fitted meshes are used.For homogeneous jump conditions,both non-conforming and conforming basis functions are constructed in such a way that they satisfy the natural jump conditions. For non-homogeneous jump conditions,a pair of functions that satisfy the same non-homogeneous jump conditions are constructed using a level-set representation of the interface.With such a pair of functions,the discontinuities across the interface in the solution and flux are removed;and an equivalent elasticity interface problem with homogeneous jump conditions is formulated.Numerical examples are presented to demonstrate that such methods have second order convergence.展开更多
A simple,efficient and accurate high resolution method to tracking moving-interfaces-the characteristic integral-averaging finite volume method on unstructured meshes is proposed. And some numerical tests and evaluati...A simple,efficient and accurate high resolution method to tracking moving-interfaces-the characteristic integral-averaging finite volume method on unstructured meshes is proposed. And some numerical tests and evaluation of six main efficient methods for interface reconstruction are made. Through strict numerical simulation,their characters,advantages and shortcomings are compared,analyzed and commended in particular.展开更多
An efficient high-order immersed interface method （IIM） is proposed to solve two-dimensional （2D） heat problems with fixed interfaces on Cartesian grids, which has the fourth-order accuracy in the maximum norm in ...An efficient high-order immersed interface method （IIM） is proposed to solve two-dimensional （2D） heat problems with fixed interfaces on Cartesian grids, which has the fourth-order accuracy in the maximum norm in both time and space directions. The space variable is discretized by a high-order compact （HOC） difference scheme with correction terms added at the irregular points. The time derivative is integrated by a Crank-Nicolson and alternative direction implicit （ADI） scheme. In this case, the time accuracy is just second-order. The Richardson extrapolation method is used to improve the time accuracy to fourth-order. The numerical results confirm the convergence order and the efficiency of the method.展开更多
The growth interfaces of CdMnTe（CMT） crystals grown by traveling heater method（THM） were studied. Two types of polycrystalline CMT feed ingots synthesized in a traditional rocking furnace and vertical Bridgman（VB...The growth interfaces of CdMnTe（CMT） crystals grown by traveling heater method（THM） were studied. Two types of polycrystalline CMT feed ingots synthesized in a traditional rocking furnace and vertical Bridgman（VB） furnace were adopted in THM growth, and the effects of the polycrystalline feed on the growth interface were revealed. The morphology of the growth interface of CMT crystal（CMT2） grown from the feed by vertical Bridgman was smoother with lower curvature compared with that of CMT crystal（CMT1） from the feed by rocking furnace. The radial Mn composition and Te inclusion distribution of the CMT wafers were analyzed and correlated to the growth interface. The Mn segregation along the radial direction and Te inclusion density of CMT2 were lower than those of CMT1. The VB method synthesized polycrystalline feed could improve the growth interface morphology, which is beneficial for decreasing the Te inclusions and Mn segregation in CMT wafers.展开更多
It is important to quantify the effect of the root diameter, the embedment length of the root and load speed on the soil-root interface mechanical properties for studying the root anchorage. The soilroot interface mec...It is important to quantify the effect of the root diameter, the embedment length of the root and load speed on the soil-root interface mechanical properties for studying the root anchorage. The soilroot interface mechanical properties can be obtained through the pullout force and root slippage curve(F-S curve). About 120 Pinus tabulaeformis single roots whose diameters ranged from 1 mm to 10 mm divided into 6 groups based on different root embedment length(50 mm, 100 mm and 150 mm) and different load velocity(10 mm·min^(-1), 50 mm·min^(-1), 100 mm·min^(-1) and 300 mm·min^(-1)) were investigated using the pullout method. This study aims to explore the mechanical properties of the soil-root interface in the real conditions using the pullout test method. The results showed two kinds of pullout test failure modes during the experimental process: breakage failure and pullout failure. The results showed that the roots were easier to be broken when the root diameter was smaller or the loading speed was larger. The relationship between the maximum anchorage force and root diameter was linear and the linearly dependent coefficient(R^2) was larger than 0.85. The anchorage force increased with the root embedment length. An increase of 10%^(-1)5% for the maximumanchorage force was found when load speed increased from 10 to 300 mm.min^(-1). The mean peak slippage of the root was from 13.81 to 35.79 mm when the load velocity varied from 10 to 300 mm.min^(-1). The study will be helpful for the design of slopes reinforced by vegetation and in predicting risk of uprooting of trees, and will have practical benefits for understanding the mechanism of landslide.展开更多
Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the meta...Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.展开更多
In this paper, we consider the mixed Navier-Stokes/Darcy model with BeaversJoseph interface conditions. Based on two-grid discretizations, a local and parallel finite element algorithm for this mixed model is proposed...In this paper, we consider the mixed Navier-Stokes/Darcy model with BeaversJoseph interface conditions. Based on two-grid discretizations, a local and parallel finite element algorithm for this mixed model is proposed and analyzed. Optimal errors are obtained and numerical experiments are presented to show the efficiency and effectiveness of the local and parallel finite element algorithm.展开更多
This paper studies the interface curing stresses between polymethyl methacrylate(PMMA)and composite by means of digital speckle correlation method(DSCM).A new method by combining DSCM with the marker points is develop...This paper studies the interface curing stresses between polymethyl methacrylate(PMMA)and composite by means of digital speckle correlation method(DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.展开更多
The lowest order Pl-nonconforming triangular finite element method （FEM） for elliptic and parabolic interface problems is investigated. Under some reasonable regularity assumptions on the exact solutions, the optima...The lowest order Pl-nonconforming triangular finite element method （FEM） for elliptic and parabolic interface problems is investigated. Under some reasonable regularity assumptions on the exact solutions, the optimal order error estimates are obtained in the broken energy norm. Finally, some numerical results are provided to verify the theoretical analysis.展开更多
The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting p...The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting process with vanadium slag.In this work,CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples were prepared and roasted for different time periods to illustrate and compare the diffusion reaction mechanisms.Then,the changes in the diffusion product and diffusion coefficient were investigated and calculated based on scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analysis.Results show that with the extension of the roasting time,the diffusion reaction gradually proceeds among the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples.The regional boundaries of calcium and vanadium are easily identifiable for the CaO–V_(2)O_(5) diffusion couple.Meanwhile,for the MnO_(2)–V_(2)O_(5) diffusion couple,MnO_(2) gradually decomposes to form Mn_(2)O_(3),and vanadium diffuses into the interior of Mn_(2)O_(3).Only a part of vanadium combines with manganese to form the diffusion production layer.CaV_(2)O_(6) and MnV_(2)O_(6) are the interfacial reaction products of the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples,respectively,whose thicknesses are 39.85 and 32.13μm when roasted for 16 h.After 16 h,both diffusion couples reach the reaction equilibrium due to the limitation of diffusion.The diffusion coefficient of the CaO–V_(2)O_(5) diffusion couple is higher than that of the MnO_(2)–V_(2)O_(5) diffusion couple for the same roasting time,and the diffusion reaction between vanadium and calcium is easier than that between vanadium and manganese.展开更多
The embedded boundary method for solving elliptic and parabolic problems in geometrically complex domains using Cartesian meshes by Johansen and Colella （1998, J. Comput. Phys. 147, 60） has been extended for ellipti...The embedded boundary method for solving elliptic and parabolic problems in geometrically complex domains using Cartesian meshes by Johansen and Colella （1998, J. Comput. Phys. 147, 60） has been extended for elliptic and parabolic problems with interior boundaries or interfaces of discontinuities of material properties or solutions. Second order accuracy is achieved in space and time for both stationary and moving interface problems. The method is conservative for elliptic and parabolic problems with fixed interfaces. Based on this method, a front tracking algorithm for the Stefan problem has been developed. The accuracy of the method is measured through comparison with exact solution to a two-dimensional Stefan problem. The algorithm has been used for the study of melting and solidification problems.展开更多
The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacen...The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.展开更多
基金financially supported by the Key R&D Program of Shandong Province,China(2023CXGC010712).
文摘Herein,a reusable and portable surface-enhanced Raman spectroscopy(SERS)sandpaper was successfully synthesized for the sensitive detection of S-fenvalerate in foods.Commercial sandpapers were decorated with Ag@SiO2@Au nanoarrays via a liquid-liquid interface self-assembly method.The capacity of sandpaper to float directly on the cyclohexane-water interface allows nanoarrays to be formed directly on it,thereby minimizing stacking issues typically associated with nanoarray assemblies and significantly enhancing the sensitivity of S-fenvalerate detection.Moreover,the SERS sandpaper was reusable and portable due to its strong adhesion of the nanoarrays.Under optimized testing conditions,the developed SERS sandpaper method was capable of detecting S-fenvalerate,demonstrating a strong linear response within a concentration range of 10^(–7)–10^(3)μmol/L,with a limit of detection of 1.92×10^(−8)μmol/L.The analysis of spiked food samples containing S-fenvalerate using the developed SERS sandpaper afforded excellent recoveries(92.2%−109.7%).Additionally,the SERS sandpaper was successfully applied to quantify S-fenvalerate in real food samples,with results consistent with analyses conducted using gas chromatography.
基金National Natural Science Foundation of China(51076006)
文摘This paper presents the extension of the global description approach of a discontinuous function, which is proposed in the previous paper, to a spectral domain decomposition method. This multi-domain spectral immersed interlace method（IIM） divides the whole computation domain into the smooth and discontinuous parts. Fewer points on the smooth domains are used via taking advantage of the high accuracy property of the spectral method, but more points on the discontinuous domains are employed to enhance the resolution of the calculation. Two that the domain decomposition technique can placed around the discontinuity. The present reached, in spite of the enlarged computational discontinuous problems are tested to verify the present method. The results show reduce the error of the spectral IIM, especially when more collocation points are method is t：avorable for the reason that the same level of the accuracy can be domain.
基金supported by the National Science Fund for Distinguished Young Scholars of China(Grant No.42225702)the National Natural Science Foundation of China(Grant Nos.42461160266 and 52379106).
文摘Geo-interfaces refer to the contact surfaces between multiple media within geological strata,as well as the transition zones that regulate the migration of three-phase matter,changes in physical states,and the deformation and stability of rock and soil masses.Owing to the combined effects of natural factors and human activities,geo-interfaces play crucial roles in the emergence,propagation,and triggering of geological disasters.Over the past three decades,the material point method(MPM)has emerged as a preferred approach for addressing large deformation problems and simulating soil-water-structure interactions,making it an ideal tool for analyzing geo-interface behaviors.In this review,we offer a systematic summary of the basic concepts,classifications,and main characteristics of the geo-interface,and provide a comprehensive overview of recent advances and developments in simulating geo-interface using the MPM.We further present a brief description of various MPMs for modeling different types of geo-interfaces in geotechnical engineering applications and highlight the existing limitations and future research directions.This study aims to facilitate innovative applications of the MPM in modeling complex geo-interface problems,providing a reference for geotechnical practitioners and researchers.
基金partially supported by the National Natural Science Foundation of China(Nos.92271103,12202191)。
文摘The diffuse-interface immersed boundary method(IBM)possesses excellent capabilities for simulating flows around complex geometries and moving boundaries.In this method,the flow field is solved on a fixed Cartesian mesh,while the solid boundary is discretized into a series of Lagrangian points immersed in the flow field.The boundary condition is implemented by introducing a force term into the momentum equation,and the interaction between the immersed boundary and the fluid domain is achieved via an interpolation process.Over the past decades,the diffuse-interface IBM has gained popularity and spawned many variants,effectively handling a wide range of flow problems from isothermal to thermal flows,from laminar to turbulent flows,and from complex geometries to fluidstructure interaction scenarios.This paper first outlines the basic principles of the diffuse-interface IBM,then highlights recent advancements achieved by the authors’research group,and finally shows the method’s excellent numerical performance and wide applicability through several case studies involving complex moving boundary problems.
文摘A new simple fictitious domain method, the algebraic immersed interface and boundary (AIIB) method, is presented for elliptic equations with immersed interface conditions. This method allows jump conditions on immersed interfaces to be discretized with a good accuracy on a compact stencil. Auxiliary unknowns are created at existing grid locations to increase the degrees of freedom of the initial problem. These auxiliary unknowns allow imposing various constraints to the system on interfaces of complex shapes. For instance, the method is able to deal with immersed interfaces for elliptic equations with jump conditions on the solution or discontinuous coefficients with a second order of spatial accuracy. As the AIIB method acts on an algebraic level and only changes the problem matrix, no particular attention to the initial discretization is required. The method can be easily implemented in any structured grid code and can deal with immersed boundary problems too. Several validation problems are presented to demonstrate the interest and accuracy of the method.
基金supported by the STI 2030 Major Projects(2022ZD0211700)the Key R&D Program of Guangdong Province,China(2018B030339001)+2 种基金the Key Realm R&D Program of Guangzhou,China(202007030007)the National Natural Science Foundation of China(82371538)The authors gratefully acknowledge the approval granted by the Ethics Committee of the Affiliated Brain Hospital of Guangzhou Medical University for this study involving human participants,with the approval ID(2021)No.071.
文摘Depression is increasingly prevalent among adolescents and can profoundly impact their lives.However,the early detection of depression is often hindered by the timeconsuming diagnostic process and the absence of objective biomarkers.In this study,we propose a novel approach for depression detection based on an affective brain-computer interface(aBCI)and the resting-state electroencephalogram(EEG).By fusing EEG features associated with both emotional and resting states,our method captures comprehensive depression-related information.The final depression detection model,derived through decision fusion with multiple independent models,further enhances detection efficacy.Our experiments involved 40 adolescents with depression and 40 matched controls.The proposed model achieved an accuracy of 86.54%on cross-validation and 88.20%on the independent test set,demonstrating the efficiency of multi-modal fusion.In addition,further analysis revealed distinct brain activity patterns between the two groups across different modalities.These findings hold promise for new directions in depression detection and intervention.
文摘The functions,applications,developments and current application mode of IDS3.x system are generally introduced in this paper.Then the development mode of spacecraft based on IDS3.x system is described.The existing problems especially the information redundancy of mechanical interface and their effects are pointed out.A new solution is proposed by developing 3D-IDS system.The central functions of 3D-IDS system are shown in this study.A new application mode of 3D-IDS system is explored and described by showing how to fill in,countersign and apply with 3D-IDS file.The 2D drawing and sketch are removed from 3D-IDS system to avoid information redundancy of mechanical interface.The consistency between 3D model and the parameters of IDS file can be guaranteed by the interface tool.The efficiency of filling in,countersigning and applying,has been improved significantly,which greatly promotes the coordination and total efficiency of spacecraft system design departments and unit design departments.
文摘A differential geometrical method is for the first time used to calculate the effective moduli of a two-phase elastic composite materials with imperfect interface which the inclusions are assumed to be ellipsoidal of revolutions. All of the interface integral items participating in forming the potential and complementary energy functionals of the composite materials are expressed in terms of intrinsic quantities of the ellipsoidal of revolutions. Based on this, the upper and the lower bound for the effective elastic moduli of the composite materials with inclusions described above have been derived. Under three limiting conditions of sphere, disk and needle shaped inclusions, the results of this paper will return to the bounds obtained by Hashin([6]) (1992).
基金supported by the US ARO grants 49308-MA and 56349-MAthe US AFSOR grant FA9550-06-1-024+1 种基金he US NSF grant DMS-0911434the State Key Laboratory of Scientific and Engineering Computing of Chinese Academy of Sciences during a visit by Z.Li between July-August,2008.
文摘In this paper,a class of new immersed interface finite element methods (IIFEM) is developed to solve elasticity interface problems with homogeneous and non-homogeneous jump conditions in two dimensions.Simple non-body-fitted meshes are used.For homogeneous jump conditions,both non-conforming and conforming basis functions are constructed in such a way that they satisfy the natural jump conditions. For non-homogeneous jump conditions,a pair of functions that satisfy the same non-homogeneous jump conditions are constructed using a level-set representation of the interface.With such a pair of functions,the discontinuities across the interface in the solution and flux are removed;and an equivalent elasticity interface problem with homogeneous jump conditions is formulated.Numerical examples are presented to demonstrate that such methods have second order convergence.
文摘A simple,efficient and accurate high resolution method to tracking moving-interfaces-the characteristic integral-averaging finite volume method on unstructured meshes is proposed. And some numerical tests and evaluation of six main efficient methods for interface reconstruction are made. Through strict numerical simulation,their characters,advantages and shortcomings are compared,analyzed and commended in particular.
基金supported by the National Natural Science Foundation of China(No.51174236)the National Basic Research Program of China(973 Program)(No.2011CB606306)the Opening Project of State Key Laboratory of Porous Metal Materials(No.PMM-SKL-4-2012)
文摘An efficient high-order immersed interface method （IIM） is proposed to solve two-dimensional （2D） heat problems with fixed interfaces on Cartesian grids, which has the fourth-order accuracy in the maximum norm in both time and space directions. The space variable is discretized by a high-order compact （HOC） difference scheme with correction terms added at the irregular points. The time derivative is integrated by a Crank-Nicolson and alternative direction implicit （ADI） scheme. In this case, the time accuracy is just second-order. The Richardson extrapolation method is used to improve the time accuracy to fourth-order. The numerical results confirm the convergence order and the efficiency of the method.
基金Projects(11375112,51472155,11275122)supported by the National Natural Science Foundation of China
文摘The growth interfaces of CdMnTe（CMT） crystals grown by traveling heater method（THM） were studied. Two types of polycrystalline CMT feed ingots synthesized in a traditional rocking furnace and vertical Bridgman（VB） furnace were adopted in THM growth, and the effects of the polycrystalline feed on the growth interface were revealed. The morphology of the growth interface of CMT crystal（CMT2） grown from the feed by vertical Bridgman was smoother with lower curvature compared with that of CMT crystal（CMT1） from the feed by rocking furnace. The radial Mn composition and Te inclusion distribution of the CMT wafers were analyzed and correlated to the growth interface. The Mn segregation along the radial direction and Te inclusion density of CMT2 were lower than those of CMT1. The VB method synthesized polycrystalline feed could improve the growth interface morphology, which is beneficial for decreasing the Te inclusions and Mn segregation in CMT wafers.
基金supported by the Fundamental Research Funds for the Central Universities(No.YX2010-20)the Open Projects Foundation of Key Laboratory of Soil and Water Conservation & Desertification Combat (Beijing ForestryUniversity), Ministry of Education of P.R. China (No.201002) the National Natural Science Foundation of China (No. 31570708, No.30901162)
文摘It is important to quantify the effect of the root diameter, the embedment length of the root and load speed on the soil-root interface mechanical properties for studying the root anchorage. The soilroot interface mechanical properties can be obtained through the pullout force and root slippage curve(F-S curve). About 120 Pinus tabulaeformis single roots whose diameters ranged from 1 mm to 10 mm divided into 6 groups based on different root embedment length(50 mm, 100 mm and 150 mm) and different load velocity(10 mm·min^(-1), 50 mm·min^(-1), 100 mm·min^(-1) and 300 mm·min^(-1)) were investigated using the pullout method. This study aims to explore the mechanical properties of the soil-root interface in the real conditions using the pullout test method. The results showed two kinds of pullout test failure modes during the experimental process: breakage failure and pullout failure. The results showed that the roots were easier to be broken when the root diameter was smaller or the loading speed was larger. The relationship between the maximum anchorage force and root diameter was linear and the linearly dependent coefficient(R^2) was larger than 0.85. The anchorage force increased with the root embedment length. An increase of 10%^(-1)5% for the maximumanchorage force was found when load speed increased from 10 to 300 mm.min^(-1). The mean peak slippage of the root was from 13.81 to 35.79 mm when the load velocity varied from 10 to 300 mm.min^(-1). The study will be helpful for the design of slopes reinforced by vegetation and in predicting risk of uprooting of trees, and will have practical benefits for understanding the mechanism of landslide.
基金supported jointly by the National Basic Research Program of China("973"Program)(No2014CB046200)the National Science Foundation of Jiangsu Province(No.BK2014059)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe National Natural Science Foundation of China(No.11172135)
文摘Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.
文摘In this paper, we consider the mixed Navier-Stokes/Darcy model with BeaversJoseph interface conditions. Based on two-grid discretizations, a local and parallel finite element algorithm for this mixed model is proposed and analyzed. Optimal errors are obtained and numerical experiments are presented to show the efficiency and effectiveness of the local and parallel finite element algorithm.
基金supported by the National Basic Research Program (973 Program) of China (2011CB606105)
文摘This paper studies the interface curing stresses between polymethyl methacrylate(PMMA)and composite by means of digital speckle correlation method(DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.
基金Project supported by the National Natural Science Foundation of China(No.11271340)
文摘The lowest order Pl-nonconforming triangular finite element method （FEM） for elliptic and parabolic interface problems is investigated. Under some reasonable regularity assumptions on the exact solutions, the optimal order error estimates are obtained in the broken energy norm. Finally, some numerical results are provided to verify the theoretical analysis.
基金supported by the National Natural Science Foundation of China(Nos.52174277 and 51874077)the Fundamental Funds for the Central Universities,China(No.N2225032)+1 种基金the China Postdoctoral Science Foundation(No.2022M720683)the Postdoctoral Fund of Northeastern University,China。
文摘The formation mechanism of calcium vanadate and manganese vanadate and the difference between calcium and manganese in the reaction with vanadium are basic issues in the calcification roasting and manganese roasting process with vanadium slag.In this work,CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples were prepared and roasted for different time periods to illustrate and compare the diffusion reaction mechanisms.Then,the changes in the diffusion product and diffusion coefficient were investigated and calculated based on scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analysis.Results show that with the extension of the roasting time,the diffusion reaction gradually proceeds among the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples.The regional boundaries of calcium and vanadium are easily identifiable for the CaO–V_(2)O_(5) diffusion couple.Meanwhile,for the MnO_(2)–V_(2)O_(5) diffusion couple,MnO_(2) gradually decomposes to form Mn_(2)O_(3),and vanadium diffuses into the interior of Mn_(2)O_(3).Only a part of vanadium combines with manganese to form the diffusion production layer.CaV_(2)O_(6) and MnV_(2)O_(6) are the interfacial reaction products of the CaO–V_(2)O_(5) and MnO_(2)–V_(2)O_(5) diffusion couples,respectively,whose thicknesses are 39.85 and 32.13μm when roasted for 16 h.After 16 h,both diffusion couples reach the reaction equilibrium due to the limitation of diffusion.The diffusion coefficient of the CaO–V_(2)O_(5) diffusion couple is higher than that of the MnO_(2)–V_(2)O_(5) diffusion couple for the same roasting time,and the diffusion reaction between vanadium and calcium is easier than that between vanadium and manganese.
基金supported by the U.S.Department of Energy under Contract No.DE-AC02-98CH10886 and by the State of New York
文摘The embedded boundary method for solving elliptic and parabolic problems in geometrically complex domains using Cartesian meshes by Johansen and Colella （1998, J. Comput. Phys. 147, 60） has been extended for elliptic and parabolic problems with interior boundaries or interfaces of discontinuities of material properties or solutions. Second order accuracy is achieved in space and time for both stationary and moving interface problems. The method is conservative for elliptic and parabolic problems with fixed interfaces. Based on this method, a front tracking algorithm for the Stefan problem has been developed. The accuracy of the method is measured through comparison with exact solution to a two-dimensional Stefan problem. The algorithm has been used for the study of melting and solidification problems.
基金supported by the National Science Foundation of China(No.20775060 and No.20875077)the National Science Foundation of Gansu(No.0701RJZA109 and No.0803RJZA105)and the Key Laboratory of Polymer Materials of Gansu Province
文摘The effect of an adsorbed anionic surfactant sodium dodecyl benzene sulfonate （SDBS） on electron transfer （ET） reaction between ferricyanide aqueous solution and decamethylferrocene （DMFc） located on the adjacent organic phase was investigated for the first time by thin layer method. The adsorption of SDBS at the interface resulted in a decay in the cathodic plateau current of bimolecular reaction with increasing concentrations of SDBS in aqueous phase. However, the rate constant of electron transfer （ket） increased monotonically as the SDBS concentrations increased from 0 to 200 p, moFL. The experimental results showed that SDBS formed patches on the interface and influenced the structure of electrical double layer. 2009 Xiao Quan Lu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.
