Flexible electronics face critical challenges in achieving monolithic three-dimensional(3D)integration,including material compatibility,structural stability,and scalable fabrication methods.Inspired by the tactile sen...Flexible electronics face critical challenges in achieving monolithic three-dimensional(3D)integration,including material compatibility,structural stability,and scalable fabrication methods.Inspired by the tactile sensing mechanism of the human skin,we have developed a flexible monolithic 3D-integrated tactile sensing system based on a holey MXene paste,where each vertical one-body unit simultaneously functions as a microsupercapacitor and pressure sensor.The in-plane mesopores of MXene significantly improve ion accessibility,mitigate the self-stacking of nanosheets,and allow the holey MXene to multifunctionally act as a sensing material,an active electrode,and a conductive interconnect,thus drastically reducing the interface mismatch and enhancing the mechanical robustness.Furthermore,we fabricate a large-scale device using a blade-coating and stamping method,which demonstrates excellent mechanical flexibility,low-power consumption,rapid response,and stable long-term operation.As a proof-of-concept application,we integrate our sensing array into a smart access control system,leveraging deep learning to accurately identify users based on their unique pressing behaviors.This study provides a promising approach for designing highly integrated,intelligent,and flexible electronic systems for advanced human-computer interactions and personalized electronics.展开更多
Three-dimensional(3D)graphene monoliths are a new carbon material,that has tremendous potential in the fields of energy conversion and storage.They can solve the limitations of two-dimensional(2D)graphene sheets,inclu...Three-dimensional(3D)graphene monoliths are a new carbon material,that has tremendous potential in the fields of energy conversion and storage.They can solve the limitations of two-dimensional(2D)graphene sheets,including interlayer restacking,high contact resistance,and insufficient pore accessibility.By constructing interconnected porous networks,3D graphenes not only retain the intrinsic advantages of 2D graphene sheets,such as high specific surface area,excellent electrical and thermal conductivities,good mechanical properties,and outstanding chemical stability,but also enable efficient mass transport of external fluid species.We summarize the fabrication methods for 3D graphenes,with a particular focus on their applications in energy-related systems.Techniques including chemical reduction assembly,chemical vapor deposition,3D printing,chemical blowing,and zinc-tiered pyrolysis have been developed to change their pore structure and elemental composition,and ways in which they can be integrated with functional components.In terms of energy conversion and storage,they have found broad use in buffering mechanical impacts,suppressing noise,photothermal conversion,electromagnetic shielding and absorption.They have also been used in electrochemical energy systems such as supercapacitors,secondary batteries,and electrocatalysis.By reviewing recent progress in structural design and new applications,we also discuss the problems these materials face,including scalable fabrication and precise pore structure control,and possible new applications.展开更多
The authors regret that due to negligence,the picture was misplaced in the original manuscript,resulting in Fig.6d being incorrectly included.The correct version of Fig.6d is provided below for reference.This error do...The authors regret that due to negligence,the picture was misplaced in the original manuscript,resulting in Fig.6d being incorrectly included.The correct version of Fig.6d is provided below for reference.This error does not affect the conclusions of the study,and we apologize for any confusion it may have caused.展开更多
Wearable fiber-shaped integrated energy conversion and storage devices have attracted increasing attention,but it remains a big challenge to achieve a common fiber electrode for both energy conversion and storage with...Wearable fiber-shaped integrated energy conversion and storage devices have attracted increasing attention,but it remains a big challenge to achieve a common fiber electrode for both energy conversion and storage with high performance.Here,we grow aligned carbon nanotubes(CNTs)array on continuous graphene(G)tube,and their seamlessly connected structure provides the obtained G/CNTs composite fiber with a unique self-supported hollow structure.Taking advantage of the hollow structure,other active materials(e.g.,polyaniline,PANI)could be easily functionalized on both inner and outer surfaces of the tube,and the obtained G/CNTs/PANI composite hollow fibers achieve a high mass loading(90%)of PANI.The G/CNTs/PANI composite hollow fibers can not only be used for high-performance fiber-shaped supercapacitor with large specific capacitance of 472 mF cm^-2,but also can replace platinum wire to build fiber-shaped dye-sensitized solar cell(DSSC)with a high power conversion efficiency of 4.20%.As desired,the integrated device of DSSC and supercapacitor with the G/CNTs/PANI composite hollow fiber used as the common electrode exhibits a total power conversion and storage efficiency as high as 2.1%.Furthermore,the self-supported G/CNTs hollow fiber could be further functionalized with other active materials for building other flexible and wearable electronics.展开更多
This study examines the “V + Dào” construction as a state change event through the lens of the Event Integration Hypothesis. It focuses on how these constructions represent state changes, exploring distinctions...This study examines the “V + Dào” construction as a state change event through the lens of the Event Integration Hypothesis. It focuses on how these constructions represent state changes, exploring distinctions between “change” and “stasis”. Using a corpus-based approach, the analysis covers the semantic and syntactic features of “V + Dào” constructions and their event integration patterns. The findings highlight the distribution of agency, animacy, and support relations in state change events, emphasizing the complex interaction of internal and external event integrations and their correlation with the conceptual primitives of change and transition. This study offers insights into the lexicalization and grammaticalization processes of the “V + Dào” construction, and potentially the broader verb-complement constructions in Mandarin.展开更多
With the aid of the properties of the hypersingular kernels, a geometric conversion approach was presented in this paper. The conversion leads to a general approach for the accurate and reliable numerical evaluation o...With the aid of the properties of the hypersingular kernels, a geometric conversion approach was presented in this paper. The conversion leads to a general approach for the accurate and reliable numerical evaluation of the hypersingular surface boundary integrals encountered in a variety of applications with boundary element method. Based on the conversion, the hypersingularity in the boundary integrals could be lowered by one order, resulting in the simplification of the computer code. Moreover, an integral transformation was introduced to damp out the nearly singular behavior of the kernels by the distance function defined in the local polar coordinate system for the nearly hypersingular case. The approach is simple to use, which can be inserted readily to computer code, thus getting rid of the dull routine deduction of formulae before the numerical implementations, as the expressions of these kernels are in general complicated. The numerical examples were given in three dimensional elasticity, verifying the effectiveness of the proposed approach, which makes it possible to observe numerically the behavior of the boundary integral values with hypersingular kernels across the boundary.展开更多
Works on exploring an environmentally clean method for producing an Mg,Al-hydrotalcite(Mg6Al2(OH) 16CO3·4H2O) layer and/or calcium carbonate(CaCO3) layer on Mg alloy in a carbonic acid solution system(aqueous HCO...Works on exploring an environmentally clean method for producing an Mg,Al-hydrotalcite(Mg6Al2(OH) 16CO3·4H2O) layer and/or calcium carbonate(CaCO3) layer on Mg alloy in a carbonic acid solution system(aqueous HCO3-/CO3 2-or Ca 2+ /HCO3-) at 50℃ were reviewed.Conversion treatment for the Mg,Al-hydrotalcite conversion coating was as follows.Mg alloy was treated first in acidic HCO3-/CO3 2-aqueous for precursor layer formation on Mg alloy surface and then in alkaline HCO3-/CO3 2-aqueous to form a crystallized Mg,Al-hydrotalcite coating.Duration of an Mg,Al-hydrotalcite coating on Mg alloy surface was reduced from 12 h to 4 h by the conversion treatment.On the other hand,for reducing the formation time of CaCO3 coating on Mg alloy,the aqueous Ca 2+ /HCO3-with a saturated Ca 2+ content was employed for developing a CaCO3 coating on Mg alloy.A dense CaCO3 coating could yield on Mg alloy surface in 2 h.Corrosion rate(corrosion current density,Jcorr) of the Mg,Al-hydrotalcite-coated sample and CaCO3-coated AZ91D sample was 7-10μA/cm 2,roughly two orders less than the Jcorr of the as-diecast sample(about 200μA/cm 2) . No corrosion spot on the Mg,Al-hydrotalcite-coated sample and CaCO3-coated sample was observed after 72 h and 192 h salt spray test,respectively.展开更多
Objective:Glioblastoma(GBM)is the most prevalent and aggressive adult primary cancer in the central nervous system.Therapeutic approaches for GBM treatment are under intense investigation,including the use of emerging...Objective:Glioblastoma(GBM)is the most prevalent and aggressive adult primary cancer in the central nervous system.Therapeutic approaches for GBM treatment are under intense investigation,including the use of emerging immunotherapies.Here,we propose an alternative approach to treat GBM through reprogramming proliferative GBM cells into non-proliferative neurons.Methods:Retroviruses were used to target highly proliferative human GBM cells through overexpression of neural transcription factors.Immunostaining,electrophysiological recording,and bulk RNA-seq were performed to investigate the mechanisms underlying the neuronal conversion of human GBM cells.An in vivo intracranial xenograft mouse model was used to examine the neuronal conversion of human GBM cells.Results:We report efficient neuronal conversion from human GBM cells by overexpressing single neural transcription factor Neurogenic differentiation 1(Neuro D1),Neurogenin-2(Neurog2),or Achaete-scute homolog 1(Ascl1).Subtype characterization showed that the majority of Neurog2-and Neuro D1-converted neurons were glutamatergic,while Ascl1 favored GABAergic neuron generation.The GBM cell-converted neurons not only showed pan-neuronal markers but also exhibited neuron-specific electrophysiological activities.Transcriptome analyses revealed that neuronal genes were activated in glioma cells after overexpression of neural transcription factors,and different signaling pathways were activated by different neural transcription factors.Importantly,the neuronal conversion of GBM cells was accompanied by significant inhibition of GBM cell proliferation in both in vitro and in vivo models.Conclusions:These results suggest that GBM cells can be reprogrammed into different subtypes of neurons,leading to a potential alternative approach to treat brain tumors using in vivo cell conversion technology.展开更多
The idea of Ku-band transceiver frequency conversion module design based on 3D micropackaging technology is proposed. By using the double frequency conversion technology,the dual transceiver circuit from Ku-band to L-...The idea of Ku-band transceiver frequency conversion module design based on 3D micropackaging technology is proposed. By using the double frequency conversion technology,the dual transceiver circuit from Ku-band to L-band is realized by combining with the local oscillator and the power control circuit to complete functions such as amplification, filtering and gain. In order to achieve the performance optimization and a high level of integration of the Ku-band monolithic microwave integrated circuits(MMIC) operating chip, the 3 D vertical interconnection micro-assembly technology is used. By stacking solder balls on the printed circuit board(PCB), the technology decreases the volume of the original transceiver to a miniaturized module. The module has a good electromagnetic compatibility through special structure designs. This module has the characteristics of miniaturization, low power consumption and high density, which is suitable for popularization in practical application.展开更多
The construction of S‐scheme heterojunction photocatalysts has been regarded as an effective avenue to facilitate the conversion of solar energy to fuel.However,there are still considerable challenges with regard to ...The construction of S‐scheme heterojunction photocatalysts has been regarded as an effective avenue to facilitate the conversion of solar energy to fuel.However,there are still considerable challenges with regard to efficient charge transfer,the abundance of catalytic sites,and extended light absorption.Herein,an S‐scheme heterojunction of 2D/2D zinc porphyrin‐based metal‐organic frameworks/BiVO_(4)nanosheets(Zn‐MOF/BVON)was fabricated for efficient photocatalytic CO_(2)conversion.The optimal one shows a 22‐fold photoactivity enhancement when compared to the previously reported BiVO4 nanoflake(ca.15 nm),and even exhibits~2‐time improvement than the traditional g‐C3N4/BiVO4 heterojunction.The excellent photoactivities are ascribed to the strengthened S‐scheme charge transfer and separation,promoted CO_(2)activation by the well‐dispersed metal nodes Zn_(2)(COO)_(4)in the Zn‐MOF,and extended visible light response range based on the results of the electrochemical reduction,electron paramagnetic resonance,and in‐situ diffuse reflectance infrared Fourier transform spectroscopy.The dimension‐matched Zn‐MOF/BVON S‐scheme heterojunction endowed with highly efficient charge separation and abundant catalytic active sites contributed to the superior CO2 conversion.This study offers a facile strategy for constructing S‐scheme heterojunctions involving porphyrin‐based MOFs for solar fuel production.展开更多
The time-interleaved analog-to-digital conversion(TIADC)technique is an effective method for increasing the sampling rate in a waveform digitization system.In this study,a 20-Gsps TIADC system was designed.A wide-band...The time-interleaved analog-to-digital conversion(TIADC)technique is an effective method for increasing the sampling rate in a waveform digitization system.In this study,a 20-Gsps TIADC system was designed.A wide-bandwidth performance was achieved by optimizing the analog circuits,and a sufficient effective number of bits(ENOB)performance guaranteed using the perfect reconstruction algorithm for mismatch error correction.The proposed system was verified by tests,and the results indicated that a-3 dB bandwidth of 6 GHz and the ENOB performance of 8.7 bits at 1 GHz and 7.6 bits at6 GHz were successfully achieved.展开更多
A new method creating depth information for 2D/3D conversion was proposed. The distance between objects is determined by the distances between objects and light source position which is estimated by the analysis of th...A new method creating depth information for 2D/3D conversion was proposed. The distance between objects is determined by the distances between objects and light source position which is estimated by the analysis of the image. The estimated lighting value is used to normalize the image. A threshold value is determined by some weighted operation between the original image and the normalized image. By applying the threshold value to the original image, background area is removed. Depth information of interested area is calculated from the lighting changes. The final 3D images converted with the proposed method are used to verify its effectiveness.展开更多
Nonlayered two-dimensional(2D)materials have attracted increasing attention,due to novel physical properties,unique surface structure,and high compatibility with microfabrication technique.However,owing to the inheren...Nonlayered two-dimensional(2D)materials have attracted increasing attention,due to novel physical properties,unique surface structure,and high compatibility with microfabrication technique.However,owing to the inherent strong covalent bonds,the direct synthesis of 2D planar structure from nonlayered materials,especially for the realization of large-size ultrathin 2D nonlayered materials,is still a huge challenge.Here,a general atomic substitution conversion strategy is proposed to synthesize large-size,ultrathin nonlayered 2D materials.Taking nonlayered CdS as a typical example,large-size ultrathin nonlayered CdS single-crystalline flakes are successfully achieved via a facile low-temperature chemical sulfurization method,where pre-grown layered CdI2 flakes are employed as the precursor via a simple hot plate assisted vertical vapor deposition method.The size and thickness of CdS flakes can be controlled by the CdI2 precursor.The growth mechanism is ascribed to the chemical substitution reaction from I to S atoms between CdI2 and CdS,which has been evidenced by experiments and theoretical calculations.The atomic substitution conversion strategy demonstrates that the existing 2D layered materials can serve as the precursor for difficult-to-synthesize nonlayered 2D materials,providing a bridge between layered and nonlayered materials,meanwhile realizing the fabrication of large-size ultrathin nonlayered 2D materials.展开更多
The 3D clearance of a high-speed train(HST) is critical to ensure the safety of railway transportation. Many studies have been conducted on the inspection of the clearance profile in railway operation based on the vis...The 3D clearance of a high-speed train(HST) is critical to ensure the safety of railway transportation. Many studies have been conducted on the inspection of the clearance profile in railway operation based on the vision system, but few researchers have focused on the computation of the 3D clearance in the design phase of an HST. This paper summarizes the virtual 3D clearance computation of an HST based on model integration and the convex hull method. First, both the aerodynamic and kinetic analysis models of the HST are constructed. The two models are then integrated according to the corresponding relationship map, and an array of transformation matrixes of the HST is created to drive the designed model simulating the physical railway motion. Furthermore, the convex hull method is adopted to compute the 3D envelope of the moving train. Finally, the Hausdorff metric is involved in the measurement of the minimum clearance model and the 3D envelope model. In addition, the color map of the Hausdorff distance is established to verify that the designed shape of the HST meets the national standards. This paper provides an effective method to accurately calculate the 3D clearance for the shape design of an HST, which greatly reduces the development cost by minimizing the physical prototype that must be built.展开更多
2D-to-3D video conversion is a feasible way to generate 3D programs for the current 3DTV industry. However, for large-scale 3D video production, current systems are no longer adequate in terms of the time and labor re...2D-to-3D video conversion is a feasible way to generate 3D programs for the current 3DTV industry. However, for large-scale 3D video production, current systems are no longer adequate in terms of the time and labor required for conversion. In this paper, we introduce a distributed 2D-to-3D video conversion system that includes a 2D-to-3D video conversion module, architecture of the parallel computation on the cloud, and 3D video coding in the system. The system enables cooperation among multiple users in the simultaneous completion of their conversion tasks so that the conversion efficiency is greatly promoted. In the experiments, we evaluate the system based on criteria related to both time consumption and video coding performance.展开更多
Optical polarizers,which allow the transmission of specific polarization states,are essential components in modern optical systems.Here,we experimentally demonstrate integrated photonic polarizers incorporating reduce...Optical polarizers,which allow the transmission of specific polarization states,are essential components in modern optical systems.Here,we experimentally demonstrate integrated photonic polarizers incorporating reduced graphene oxide(rGO)films.2D graphene oxide(GO)films are integrated onto silicon waveguides and microring resonators(MRRs)with precise control over their thicknesses and sizes,followed by GO reduction via two different methods including uniform thermal reduction and localized photothermal reduction.We measure devices with various lengths,thicknesses,and reduction degrees of GO films.The results show that the devices with rGO exhibit better performance than those with GO,achieving a polarization-dependent loss of~47 dB and a polarization extinction ratio of~16 dB for the hybrid waveguides and MRRs with rGO,respectively.By fitting the experimental results with theory,it is found that rGO exhibits more significant anisotropy in loss,with an anisotropy ratio over 4 times that of GO.In addition,rGO shows higher thermal stability and greater robustness to photothermal reduction than GO.These results highlight the strong potential of rGO films for implementing high-performance polarization selective devices in integrated photonic platforms.展开更多
Sustainable and renewable natural resources as biomass that contains carbon and hydrogen elements can be a potential raw materials for energy conversion. In Indonesia, they comprise variable-sized wood from forests （...Sustainable and renewable natural resources as biomass that contains carbon and hydrogen elements can be a potential raw materials for energy conversion. In Indonesia, they comprise variable-sized wood from forests （i.e. natural forests, plantations and community forests that commonly produce small-diameter logs used as firewood by local people）, woody residues from logging and wood industries, oil-palm shell waste from crude palm oil factories, coconut shell wastes from coconut plantations, traditional markets as well as skimmed coconut oil and straws from rice cultivation. Four kinds of energy-conversion technologies have been empirically tested in Indonesia. First, gasification of rubber wood from unproductive rubber trees to generate heat energy for the drying of fermented chocolate seeds. Secondly, energy conversion from organic vegetable waste by implementing thermophylic fermentation methods that produce biogas as a fuel and for generating electricity and also concurrently generate organic by-products called hygen compost. Thirdly, gasification of charcoal and wood sawdust for electricity generation. Finally, environment-friendly energy conversion by carbonizing small-diameter logs, sawdust, wood slabs and coconut shells into charcoal. This yielded charcoal integrated with wood vinegar production through condensation of smoke/vapors emitted during carbonization, thereby mitigating the impact of air pollution. Among the four experimental technologies that of integrated charcoal and wood vinegar production had been spectacularly developed and favored by rural communities. This technology brought added value to the process and product due to the wood vinegar, useful as bio-pesticide, plant-growth hormone and organic fertilizer. Such integrated and environment-friendly production, therefore, should be sustained, because Indonesia occupies a significant and worldwide position as charcoal-producing and marketing country. The technology of integrated wood vinegar-charcoal production hence deserves its dissemination throughout Indonesia, particularly to the charcoal industry that still produces charcoal without condensing the generated vapor/smoke, hence polluting the air.展开更多
The relentless down-scaling of electronics grands the modern integrated circuits(ICs)with the high speed,low power dissipation and low cost,fulfilling diverse demands of modern life.Whereas,with the semiconductor indu...The relentless down-scaling of electronics grands the modern integrated circuits(ICs)with the high speed,low power dissipation and low cost,fulfilling diverse demands of modern life.Whereas,with the semiconductor industry entering into sub-10 nm technology nodes,degrading device performance and increasing power consumption give rise to insurmountable roadblocks confronted by modern ICs that need to be conquered to sustain the Moore law's life.Bulk semiconductors like prevalent Si are plagued by seriously degraded carrier mobility as thickness thinning down to sub-5 nm,which is imperative to maintain sufficient gate electrostatic controllability to combat the increasingly degraded short channel effects.Nowadays,the emergence of two-dimensional(2D)materials opens up new gateway to eschew the hurdles laid in front of the scaling trend of modern IC,mainly ascribed to their ultimately atomic thickness,capability to maintain carrier mobility with thickness thinning down,dangling-bonds free surface,wide bandgaps tunability and feasibility to constitute diverse heterostructures.Blossoming breakthroughs in discrete electronic device,such as contact engineering,dielectric integration and vigorous channel-length scaling,or large circuits arrays,as boosted yields,improved variations and full-functioned processor fabrication,based on 2D materials have been achieved nowadays,facilitating 2D materials to step under the spotlight of IC industry to be treated as the most potential future successor or complementary counterpart of incumbent Si to further sustain the down-scaling of modern IC.展开更多
This study investigates the low-velocity impact and post-impact flexural properties of 3D integrated woven spacer composites,focusing on their orthotropic behavior when tested along two principal directions,i.e.,warp(...This study investigates the low-velocity impact and post-impact flexural properties of 3D integrated woven spacer composites,focusing on their orthotropic behavior when tested along two principal directions,i.e.,warp(X-type)and weft(Y-type)directions.The same composite material was tested in these orientations to evaluate the differences in impact resistance and residual bending strength.Specimens were fabricated via vacuum-assisted molding and tested at 2,3,5,and 7 J impact energies using an Instron Ceast 9350 drop-weight impact testing machine,in accordance with ASTM D7136.Post-impact flexural tests were performed using a four-point bending method in accordance with ASTM D7264.The absorbed energy increased from 1.97 to 6.98 J,and the panel damage area ranged from 121 to 361 mm^(2) as impact energy roses.Specimens tested in the weft direction(Y-type)showed greater residual strength(up to 15.83 N)and displacement(up to 0.538 mm)than those tested in the warp direction(X-type).Ultrasonic C-scan imaging revealed localized matrix cracking and fiber failure damage patterns.Results emphasize the directional differences in impact resistance and residual bending properties,highlighting the importance of material orientation in structural applications.This study provides a foundation for utilizing 3D woven spacer composites in lightweight,damage-tolerant structural components.展开更多
The torsional low strain integrity test(TLSIT),known for its advantages such as a smaller detection blind zone,improved identification of shallowly buried defects,stable phase velocity for signal interpretation,and be...The torsional low strain integrity test(TLSIT),known for its advantages such as a smaller detection blind zone,improved identification of shallowly buried defects,stable phase velocity for signal interpretation,and better adaptability for existing pile testing.However,it lacks a comprehensive understanding of the authentic three-dimensional(3D)strain wave propagation mechanism,particularly wave reflection and transmission at defects.To address this gap,a novel 3D theoretical framework is introduced in this context to model the authentic 3D wave propagation during the TLSIT.The proposed approach is validated by comparing its results with those obtained from 3D finite element method(FEM)simulations and simplified 1D(one-dimensional)and 3D analytical solutions.Additionally,a parametric study is conducted to enhance insights into the formation mechanism of high-frequency interference observed during the TLSIT.Finally,a defect identification study is performed to provide guidance for interpreting the wave spectrum in terms of defect characteristics.展开更多
基金supported by the National Natural Science Foundation of China(52272177,12204010)the Foundation for the Introduction of High-Level Talents of Anhui University(S020118002/097)+1 种基金the University Synergy Innovation Program of Anhui Province(GXXT-2023-066)the Scientific Research Project of Anhui Provincial Higher Education Institution(2023AH040008)。
文摘Flexible electronics face critical challenges in achieving monolithic three-dimensional(3D)integration,including material compatibility,structural stability,and scalable fabrication methods.Inspired by the tactile sensing mechanism of the human skin,we have developed a flexible monolithic 3D-integrated tactile sensing system based on a holey MXene paste,where each vertical one-body unit simultaneously functions as a microsupercapacitor and pressure sensor.The in-plane mesopores of MXene significantly improve ion accessibility,mitigate the self-stacking of nanosheets,and allow the holey MXene to multifunctionally act as a sensing material,an active electrode,and a conductive interconnect,thus drastically reducing the interface mismatch and enhancing the mechanical robustness.Furthermore,we fabricate a large-scale device using a blade-coating and stamping method,which demonstrates excellent mechanical flexibility,low-power consumption,rapid response,and stable long-term operation.As a proof-of-concept application,we integrate our sensing array into a smart access control system,leveraging deep learning to accurately identify users based on their unique pressing behaviors.This study provides a promising approach for designing highly integrated,intelligent,and flexible electronic systems for advanced human-computer interactions and personalized electronics.
基金supported by National Natural Science Foundation of China(52272039,U23B2075,51972168)Key Research and Development Program in Jiangsu Province(BE2023085)Natural Science Foundation of Jiangsu Province of China(BK20231406)。
文摘Three-dimensional(3D)graphene monoliths are a new carbon material,that has tremendous potential in the fields of energy conversion and storage.They can solve the limitations of two-dimensional(2D)graphene sheets,including interlayer restacking,high contact resistance,and insufficient pore accessibility.By constructing interconnected porous networks,3D graphenes not only retain the intrinsic advantages of 2D graphene sheets,such as high specific surface area,excellent electrical and thermal conductivities,good mechanical properties,and outstanding chemical stability,but also enable efficient mass transport of external fluid species.We summarize the fabrication methods for 3D graphenes,with a particular focus on their applications in energy-related systems.Techniques including chemical reduction assembly,chemical vapor deposition,3D printing,chemical blowing,and zinc-tiered pyrolysis have been developed to change their pore structure and elemental composition,and ways in which they can be integrated with functional components.In terms of energy conversion and storage,they have found broad use in buffering mechanical impacts,suppressing noise,photothermal conversion,electromagnetic shielding and absorption.They have also been used in electrochemical energy systems such as supercapacitors,secondary batteries,and electrocatalysis.By reviewing recent progress in structural design and new applications,we also discuss the problems these materials face,including scalable fabrication and precise pore structure control,and possible new applications.
文摘The authors regret that due to negligence,the picture was misplaced in the original manuscript,resulting in Fig.6d being incorrectly included.The correct version of Fig.6d is provided below for reference.This error does not affect the conclusions of the study,and we apologize for any confusion it may have caused.
基金the National Natural Science Foundation of China(Nos.21774094,51702237,and 51973159)Science and Technology Commission of Shanghai Municipality(14DZ2261100)+1 种基金Shanghai Rising–Star Program(17QA1404300)the Youth Talent Support Program at Shanghai,the Fundamental Research Funds for the Central Universities(Tongji University).
文摘Wearable fiber-shaped integrated energy conversion and storage devices have attracted increasing attention,but it remains a big challenge to achieve a common fiber electrode for both energy conversion and storage with high performance.Here,we grow aligned carbon nanotubes(CNTs)array on continuous graphene(G)tube,and their seamlessly connected structure provides the obtained G/CNTs composite fiber with a unique self-supported hollow structure.Taking advantage of the hollow structure,other active materials(e.g.,polyaniline,PANI)could be easily functionalized on both inner and outer surfaces of the tube,and the obtained G/CNTs/PANI composite hollow fibers achieve a high mass loading(90%)of PANI.The G/CNTs/PANI composite hollow fibers can not only be used for high-performance fiber-shaped supercapacitor with large specific capacitance of 472 mF cm^-2,but also can replace platinum wire to build fiber-shaped dye-sensitized solar cell(DSSC)with a high power conversion efficiency of 4.20%.As desired,the integrated device of DSSC and supercapacitor with the G/CNTs/PANI composite hollow fiber used as the common electrode exhibits a total power conversion and storage efficiency as high as 2.1%.Furthermore,the self-supported G/CNTs hollow fiber could be further functionalized with other active materials for building other flexible and wearable electronics.
文摘This study examines the “V + Dào” construction as a state change event through the lens of the Event Integration Hypothesis. It focuses on how these constructions represent state changes, exploring distinctions between “change” and “stasis”. Using a corpus-based approach, the analysis covers the semantic and syntactic features of “V + Dào” constructions and their event integration patterns. The findings highlight the distribution of agency, animacy, and support relations in state change events, emphasizing the complex interaction of internal and external event integrations and their correlation with the conceptual primitives of change and transition. This study offers insights into the lexicalization and grammaticalization processes of the “V + Dào” construction, and potentially the broader verb-complement constructions in Mandarin.
文摘With the aid of the properties of the hypersingular kernels, a geometric conversion approach was presented in this paper. The conversion leads to a general approach for the accurate and reliable numerical evaluation of the hypersingular surface boundary integrals encountered in a variety of applications with boundary element method. Based on the conversion, the hypersingularity in the boundary integrals could be lowered by one order, resulting in the simplification of the computer code. Moreover, an integral transformation was introduced to damp out the nearly singular behavior of the kernels by the distance function defined in the local polar coordinate system for the nearly hypersingular case. The approach is simple to use, which can be inserted readily to computer code, thus getting rid of the dull routine deduction of formulae before the numerical implementations, as the expressions of these kernels are in general complicated. The numerical examples were given in three dimensional elasticity, verifying the effectiveness of the proposed approach, which makes it possible to observe numerically the behavior of the boundary integral values with hypersingular kernels across the boundary.
基金Project supported by the Ministry of Education Under the ATU Plan
文摘Works on exploring an environmentally clean method for producing an Mg,Al-hydrotalcite(Mg6Al2(OH) 16CO3·4H2O) layer and/or calcium carbonate(CaCO3) layer on Mg alloy in a carbonic acid solution system(aqueous HCO3-/CO3 2-or Ca 2+ /HCO3-) at 50℃ were reviewed.Conversion treatment for the Mg,Al-hydrotalcite conversion coating was as follows.Mg alloy was treated first in acidic HCO3-/CO3 2-aqueous for precursor layer formation on Mg alloy surface and then in alkaline HCO3-/CO3 2-aqueous to form a crystallized Mg,Al-hydrotalcite coating.Duration of an Mg,Al-hydrotalcite coating on Mg alloy surface was reduced from 12 h to 4 h by the conversion treatment.On the other hand,for reducing the formation time of CaCO3 coating on Mg alloy,the aqueous Ca 2+ /HCO3-with a saturated Ca 2+ content was employed for developing a CaCO3 coating on Mg alloy.A dense CaCO3 coating could yield on Mg alloy surface in 2 h.Corrosion rate(corrosion current density,Jcorr) of the Mg,Al-hydrotalcite-coated sample and CaCO3-coated AZ91D sample was 7-10μA/cm 2,roughly two orders less than the Jcorr of the as-diecast sample(about 200μA/cm 2) . No corrosion spot on the Mg,Al-hydrotalcite-coated sample and CaCO3-coated sample was observed after 72 h and 192 h salt spray test,respectively.
基金supported by the Charles H.“Skip”Smith Endowment Fund and the Verne M.Willaman Endowment Fund from the Pennsylvania State University to G.C。
文摘Objective:Glioblastoma(GBM)is the most prevalent and aggressive adult primary cancer in the central nervous system.Therapeutic approaches for GBM treatment are under intense investigation,including the use of emerging immunotherapies.Here,we propose an alternative approach to treat GBM through reprogramming proliferative GBM cells into non-proliferative neurons.Methods:Retroviruses were used to target highly proliferative human GBM cells through overexpression of neural transcription factors.Immunostaining,electrophysiological recording,and bulk RNA-seq were performed to investigate the mechanisms underlying the neuronal conversion of human GBM cells.An in vivo intracranial xenograft mouse model was used to examine the neuronal conversion of human GBM cells.Results:We report efficient neuronal conversion from human GBM cells by overexpressing single neural transcription factor Neurogenic differentiation 1(Neuro D1),Neurogenin-2(Neurog2),or Achaete-scute homolog 1(Ascl1).Subtype characterization showed that the majority of Neurog2-and Neuro D1-converted neurons were glutamatergic,while Ascl1 favored GABAergic neuron generation.The GBM cell-converted neurons not only showed pan-neuronal markers but also exhibited neuron-specific electrophysiological activities.Transcriptome analyses revealed that neuronal genes were activated in glioma cells after overexpression of neural transcription factors,and different signaling pathways were activated by different neural transcription factors.Importantly,the neuronal conversion of GBM cells was accompanied by significant inhibition of GBM cell proliferation in both in vitro and in vivo models.Conclusions:These results suggest that GBM cells can be reprogrammed into different subtypes of neurons,leading to a potential alternative approach to treat brain tumors using in vivo cell conversion technology.
文摘The idea of Ku-band transceiver frequency conversion module design based on 3D micropackaging technology is proposed. By using the double frequency conversion technology,the dual transceiver circuit from Ku-band to L-band is realized by combining with the local oscillator and the power control circuit to complete functions such as amplification, filtering and gain. In order to achieve the performance optimization and a high level of integration of the Ku-band monolithic microwave integrated circuits(MMIC) operating chip, the 3 D vertical interconnection micro-assembly technology is used. By stacking solder balls on the printed circuit board(PCB), the technology decreases the volume of the original transceiver to a miniaturized module. The module has a good electromagnetic compatibility through special structure designs. This module has the characteristics of miniaturization, low power consumption and high density, which is suitable for popularization in practical application.
文摘The construction of S‐scheme heterojunction photocatalysts has been regarded as an effective avenue to facilitate the conversion of solar energy to fuel.However,there are still considerable challenges with regard to efficient charge transfer,the abundance of catalytic sites,and extended light absorption.Herein,an S‐scheme heterojunction of 2D/2D zinc porphyrin‐based metal‐organic frameworks/BiVO_(4)nanosheets(Zn‐MOF/BVON)was fabricated for efficient photocatalytic CO_(2)conversion.The optimal one shows a 22‐fold photoactivity enhancement when compared to the previously reported BiVO4 nanoflake(ca.15 nm),and even exhibits~2‐time improvement than the traditional g‐C3N4/BiVO4 heterojunction.The excellent photoactivities are ascribed to the strengthened S‐scheme charge transfer and separation,promoted CO_(2)activation by the well‐dispersed metal nodes Zn_(2)(COO)_(4)in the Zn‐MOF,and extended visible light response range based on the results of the electrochemical reduction,electron paramagnetic resonance,and in‐situ diffuse reflectance infrared Fourier transform spectroscopy.The dimension‐matched Zn‐MOF/BVON S‐scheme heterojunction endowed with highly efficient charge separation and abundant catalytic active sites contributed to the superior CO2 conversion.This study offers a facile strategy for constructing S‐scheme heterojunctions involving porphyrin‐based MOFs for solar fuel production.
基金supported in part by the National Natural Science Foundation of China(No.11675173)the Youth Innovation Promotion Association CASthe CAS Center for Excellence in Particle Physics(CCEPP)。
文摘The time-interleaved analog-to-digital conversion(TIADC)technique is an effective method for increasing the sampling rate in a waveform digitization system.In this study,a 20-Gsps TIADC system was designed.A wide-bandwidth performance was achieved by optimizing the analog circuits,and a sufficient effective number of bits(ENOB)performance guaranteed using the perfect reconstruction algorithm for mismatch error correction.The proposed system was verified by tests,and the results indicated that a-3 dB bandwidth of 6 GHz and the ENOB performance of 8.7 bits at 1 GHz and 7.6 bits at6 GHz were successfully achieved.
文摘A new method creating depth information for 2D/3D conversion was proposed. The distance between objects is determined by the distances between objects and light source position which is estimated by the analysis of the image. The estimated lighting value is used to normalize the image. A threshold value is determined by some weighted operation between the original image and the normalized image. By applying the threshold value to the original image, background area is removed. Depth information of interested area is calculated from the lighting changes. The final 3D images converted with the proposed method are used to verify its effectiveness.
基金This work was supported by National Natural Science Foundation of China(21825103,11774044,52072059)the Hubei Provincial Natural Science Foundation of China(2019CFA002)+1 种基金the Fundamental Research Funds for the Central Universities(2019kfyXMBZ018 and 2020kfyXJJS050)We also thank the technical support from Analytical and Testing Center in Huazhong University of Science and Technology.
文摘Nonlayered two-dimensional(2D)materials have attracted increasing attention,due to novel physical properties,unique surface structure,and high compatibility with microfabrication technique.However,owing to the inherent strong covalent bonds,the direct synthesis of 2D planar structure from nonlayered materials,especially for the realization of large-size ultrathin 2D nonlayered materials,is still a huge challenge.Here,a general atomic substitution conversion strategy is proposed to synthesize large-size,ultrathin nonlayered 2D materials.Taking nonlayered CdS as a typical example,large-size ultrathin nonlayered CdS single-crystalline flakes are successfully achieved via a facile low-temperature chemical sulfurization method,where pre-grown layered CdI2 flakes are employed as the precursor via a simple hot plate assisted vertical vapor deposition method.The size and thickness of CdS flakes can be controlled by the CdI2 precursor.The growth mechanism is ascribed to the chemical substitution reaction from I to S atoms between CdI2 and CdS,which has been evidenced by experiments and theoretical calculations.The atomic substitution conversion strategy demonstrates that the existing 2D layered materials can serve as the precursor for difficult-to-synthesize nonlayered 2D materials,providing a bridge between layered and nonlayered materials,meanwhile realizing the fabrication of large-size ultrathin nonlayered 2D materials.
基金Projects(51605495,51575541)supported by the National Natural Science Foundation of ChinaProject(2015JJ2168)supported by the Natural Science Foundation of Hunan Province of China
文摘The 3D clearance of a high-speed train(HST) is critical to ensure the safety of railway transportation. Many studies have been conducted on the inspection of the clearance profile in railway operation based on the vision system, but few researchers have focused on the computation of the 3D clearance in the design phase of an HST. This paper summarizes the virtual 3D clearance computation of an HST based on model integration and the convex hull method. First, both the aerodynamic and kinetic analysis models of the HST are constructed. The two models are then integrated according to the corresponding relationship map, and an array of transformation matrixes of the HST is created to drive the designed model simulating the physical railway motion. Furthermore, the convex hull method is adopted to compute the 3D envelope of the moving train. Finally, the Hausdorff metric is involved in the measurement of the minimum clearance model and the 3D envelope model. In addition, the color map of the Hausdorff distance is established to verify that the designed shape of the HST meets the national standards. This paper provides an effective method to accurately calculate the 3D clearance for the shape design of an HST, which greatly reduces the development cost by minimizing the physical prototype that must be built.
基金supported by the National Key Basic Research Program of China (973 Program) under Grant No. 2009CB320904the National Natural Science Foundation of China under Grants No. 61121002, No. 61231010, 91120004the Key Projects in the National Science and Technology Pillar Program under Grant No. 2011BAH08B03
文摘2D-to-3D video conversion is a feasible way to generate 3D programs for the current 3DTV industry. However, for large-scale 3D video production, current systems are no longer adequate in terms of the time and labor required for conversion. In this paper, we introduce a distributed 2D-to-3D video conversion system that includes a 2D-to-3D video conversion module, architecture of the parallel computation on the cloud, and 3D video coding in the system. The system enables cooperation among multiple users in the simultaneous completion of their conversion tasks so that the conversion efficiency is greatly promoted. In the experiments, we evaluate the system based on criteria related to both time consumption and video coding performance.
基金supported by the Australian Research Council Centre of Excellence Project in Optical Microcombs for Breakthrough Science(No.CE230100006)the Australian Research Council Discovery Projects Programs(Nos.P190103186 and FT210100806)+4 种基金Linkage Program(Nos.LP210200345 and LP210100467)the Swinburne ECR-SUPRA program,the Industrial Transformation Training Centres scheme(No.IC180100005)the National Natural Science Foundation of China(No.12404375)the Beijing Natural Science Foundation(No.Z180007)the Innovation Program for Quantum Science and Technology(No.2021ZD0300703).
文摘Optical polarizers,which allow the transmission of specific polarization states,are essential components in modern optical systems.Here,we experimentally demonstrate integrated photonic polarizers incorporating reduced graphene oxide(rGO)films.2D graphene oxide(GO)films are integrated onto silicon waveguides and microring resonators(MRRs)with precise control over their thicknesses and sizes,followed by GO reduction via two different methods including uniform thermal reduction and localized photothermal reduction.We measure devices with various lengths,thicknesses,and reduction degrees of GO films.The results show that the devices with rGO exhibit better performance than those with GO,achieving a polarization-dependent loss of~47 dB and a polarization extinction ratio of~16 dB for the hybrid waveguides and MRRs with rGO,respectively.By fitting the experimental results with theory,it is found that rGO exhibits more significant anisotropy in loss,with an anisotropy ratio over 4 times that of GO.In addition,rGO shows higher thermal stability and greater robustness to photothermal reduction than GO.These results highlight the strong potential of rGO films for implementing high-performance polarization selective devices in integrated photonic platforms.
文摘Sustainable and renewable natural resources as biomass that contains carbon and hydrogen elements can be a potential raw materials for energy conversion. In Indonesia, they comprise variable-sized wood from forests （i.e. natural forests, plantations and community forests that commonly produce small-diameter logs used as firewood by local people）, woody residues from logging and wood industries, oil-palm shell waste from crude palm oil factories, coconut shell wastes from coconut plantations, traditional markets as well as skimmed coconut oil and straws from rice cultivation. Four kinds of energy-conversion technologies have been empirically tested in Indonesia. First, gasification of rubber wood from unproductive rubber trees to generate heat energy for the drying of fermented chocolate seeds. Secondly, energy conversion from organic vegetable waste by implementing thermophylic fermentation methods that produce biogas as a fuel and for generating electricity and also concurrently generate organic by-products called hygen compost. Thirdly, gasification of charcoal and wood sawdust for electricity generation. Finally, environment-friendly energy conversion by carbonizing small-diameter logs, sawdust, wood slabs and coconut shells into charcoal. This yielded charcoal integrated with wood vinegar production through condensation of smoke/vapors emitted during carbonization, thereby mitigating the impact of air pollution. Among the four experimental technologies that of integrated charcoal and wood vinegar production had been spectacularly developed and favored by rural communities. This technology brought added value to the process and product due to the wood vinegar, useful as bio-pesticide, plant-growth hormone and organic fertilizer. Such integrated and environment-friendly production, therefore, should be sustained, because Indonesia occupies a significant and worldwide position as charcoal-producing and marketing country. The technology of integrated wood vinegar-charcoal production hence deserves its dissemination throughout Indonesia, particularly to the charcoal industry that still produces charcoal without condensing the generated vapor/smoke, hence polluting the air.
基金supported by start-up capital of Ningbo Eastern Institute of technology。
文摘The relentless down-scaling of electronics grands the modern integrated circuits(ICs)with the high speed,low power dissipation and low cost,fulfilling diverse demands of modern life.Whereas,with the semiconductor industry entering into sub-10 nm technology nodes,degrading device performance and increasing power consumption give rise to insurmountable roadblocks confronted by modern ICs that need to be conquered to sustain the Moore law's life.Bulk semiconductors like prevalent Si are plagued by seriously degraded carrier mobility as thickness thinning down to sub-5 nm,which is imperative to maintain sufficient gate electrostatic controllability to combat the increasingly degraded short channel effects.Nowadays,the emergence of two-dimensional(2D)materials opens up new gateway to eschew the hurdles laid in front of the scaling trend of modern IC,mainly ascribed to their ultimately atomic thickness,capability to maintain carrier mobility with thickness thinning down,dangling-bonds free surface,wide bandgaps tunability and feasibility to constitute diverse heterostructures.Blossoming breakthroughs in discrete electronic device,such as contact engineering,dielectric integration and vigorous channel-length scaling,or large circuits arrays,as boosted yields,improved variations and full-functioned processor fabrication,based on 2D materials have been achieved nowadays,facilitating 2D materials to step under the spotlight of IC industry to be treated as the most potential future successor or complementary counterpart of incumbent Si to further sustain the down-scaling of modern IC.
基金funded by Open Foundation of the State Key Laboratory of Advanced Inorganic Fibers and Composites(Grant No.KF2024SYS02)the Jiangsu Province Special Fund for Carbon Peaking and Carbon Neutrality Technology Innovation(Grant No.BE2022008)the Prioritized Academic Program Development for Higher Education Institutions in Jiangsu.
文摘This study investigates the low-velocity impact and post-impact flexural properties of 3D integrated woven spacer composites,focusing on their orthotropic behavior when tested along two principal directions,i.e.,warp(X-type)and weft(Y-type)directions.The same composite material was tested in these orientations to evaluate the differences in impact resistance and residual bending strength.Specimens were fabricated via vacuum-assisted molding and tested at 2,3,5,and 7 J impact energies using an Instron Ceast 9350 drop-weight impact testing machine,in accordance with ASTM D7136.Post-impact flexural tests were performed using a four-point bending method in accordance with ASTM D7264.The absorbed energy increased from 1.97 to 6.98 J,and the panel damage area ranged from 121 to 361 mm^(2) as impact energy roses.Specimens tested in the weft direction(Y-type)showed greater residual strength(up to 15.83 N)and displacement(up to 0.538 mm)than those tested in the warp direction(X-type).Ultrasonic C-scan imaging revealed localized matrix cracking and fiber failure damage patterns.Results emphasize the directional differences in impact resistance and residual bending properties,highlighting the importance of material orientation in structural applications.This study provides a foundation for utilizing 3D woven spacer composites in lightweight,damage-tolerant structural components.
基金supported by the National Natural Science Foundation of China(Grant Nos.52408407 and 52478373)the‘CUG Scholar’Scientific Research Funds at China University of Geosciences(Grant No.2023082).
文摘The torsional low strain integrity test(TLSIT),known for its advantages such as a smaller detection blind zone,improved identification of shallowly buried defects,stable phase velocity for signal interpretation,and better adaptability for existing pile testing.However,it lacks a comprehensive understanding of the authentic three-dimensional(3D)strain wave propagation mechanism,particularly wave reflection and transmission at defects.To address this gap,a novel 3D theoretical framework is introduced in this context to model the authentic 3D wave propagation during the TLSIT.The proposed approach is validated by comparing its results with those obtained from 3D finite element method(FEM)simulations and simplified 1D(one-dimensional)and 3D analytical solutions.Additionally,a parametric study is conducted to enhance insights into the formation mechanism of high-frequency interference observed during the TLSIT.Finally,a defect identification study is performed to provide guidance for interpreting the wave spectrum in terms of defect characteristics.
