We use nuclear magnetic resonance （NMR） and centrifugation to measure the original water saturation and mobile water saturation of cores from the Xujiahe low permeability sandstone gas reservoir, and compare the NMR...We use nuclear magnetic resonance （NMR） and centrifugation to measure the original water saturation and mobile water saturation of cores from the Xujiahe low permeability sandstone gas reservoir, and compare the NMR results with the corresponding field data. It is shown that the NMR water saturation after 300psi centrifugation effectively represents the original water saturation measured by weighing fresh cores. There is a good correlation between mobile water saturation and the water production performance of the corresponding gas wells. The critical mobile water saturation whether reservoir produces water of the Xujiahe low permeability sandstone gas is 6%. The higher the mobile water saturation, the greater the water production rate of gas well. This indicates that well＇s water production performance can be forecasted by mobile water saturation of cores.展开更多
目的 比较可用于卫生技术评估中的生产率损失测量工具,厘清可用于卫生技术评估中的生产率损失测量工具的应用条件,以期为相关研究者在选择生产率损失的测量工具时提供参考。方法 检索PubMed、Web of Science、中国知网、万方、维普等中...目的 比较可用于卫生技术评估中的生产率损失测量工具,厘清可用于卫生技术评估中的生产率损失测量工具的应用条件,以期为相关研究者在选择生产率损失的测量工具时提供参考。方法 检索PubMed、Web of Science、中国知网、万方、维普等中外数据库,检索时间从数据库建库至2021年11月,由2名研究者按照纳入与排除标准独立筛选文献、识别生产率损失测量工具、提取资料。结果 共识别出5种可用于卫生技术评估领域中的生产率损失测量工具,包括工作能力和活动受损量表(work productivity activity and impairment,WPAI)、工作能力局限调查问卷(work limitations questionnaire,WLQ)、健康与工作绩效问卷(Health and Work Performance Questionnaire,HPQ)、损失产能的估值(Valuation of Lost Productivity Questionnaire,VOLP)和医疗技术评估研究院(Institute for Medical Technology Assessment,IMTA)的生产力成本问卷(IMTA Productivity Questionnaire,IPCQ)。其中WPAI和WLQ是测量属性证据最为充足的工具;VOLP是成本涵盖最全的工具;WLQ是数据敏感性最强的工具;IPCQ是货币转化方法最多的工具;WPAI是获取使用最方便的工具。结论 对于卫生技术评估中的生产率损失测量的标准工具尚未存在统一共识,研究者可根据自身研究选取生产率损失测量工具。展开更多
Methodological quality(risk of bias)assessment is an important step before study initiation usage.Therefore,accurately judging study type is the first priority,and the choosing proper tool is also important.In this re...Methodological quality(risk of bias)assessment is an important step before study initiation usage.Therefore,accurately judging study type is the first priority,and the choosing proper tool is also important.In this review,we introduced methodological quality assessment tools for randomized controlled trial(including individual and cluster),animal study,non-randomized interventional studies(including follow-up study,controlled before-and-after study,before-after/pre-post study,uncontrolled longitudinal study,interrupted time series study),cohort study,case-control study,cross-sectional study(including analytical and descriptive),observational case series and case reports,comparative effectiveness research,diagnostic study,health economic evaluation,prediction study(including predictor finding study,prediction model impact study,prognostic prediction model study),qualitative study,outcome measurement instruments(including patient-reported outcome measure development,content validity,structural validity,internal consistency,cross-cultural validity/measurement invariance,reliability,measurement error,criterion validity,hypotheses testing for construct validity,and responsiveness),systematic review and meta-analysis,and clinical practice guideline.The readers of our review can distinguish the types of medical studies and choose appropriate tools.In one word,comprehensively mastering relevant knowledge and implementing more practices are basic requirements for correctly assessing the methodological quality.展开更多
A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrum...A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrument, consists of different types of intelligent virtualinstrument (IVI) through individual components together as building blocks and can be displayeddirectly on the computer screen. This is a new concept of measuring instrument, and also animportant breakthrough after virtual instrument (VI). Virtual control makes instrument resourcesobtain further exploitation. It brings about a fundamental change to the design and manufacturingmode. The instrument therefore, can not only be produced directly inside a PC, but the product isinvolved in the 'green product' system. So far, all the present digital instruments will grow to bereplaced by intelligent control with green characteristics.展开更多
There exists an increasing need for Milli-Arc-Seconds(MAS)accuracy pointing measurement for current and future space systems.To meet the 0.1″space pointing measurement accuracy requirements of spacecraft in future,th...There exists an increasing need for Milli-Arc-Seconds(MAS)accuracy pointing measurement for current and future space systems.To meet the 0.1″space pointing measurement accuracy requirements of spacecraft in future,the influence of spacecraft micro-vibration on a 0.1″Space Pointing Measuring Instrument(SPMI)is studied.A Quasi-Zero Stiffness Device(QZSD)with adaptive adjustment and variable stroke was proposed.Then,a series of micro-vibration experiments of the SPMI were carried out.The influence of the micro-vibration generated by Guidance Navigation Control(GNC)attitude control components under different attitudes on the SPMI was analyzed.Point spread function of image motion in micro-vibration was also derived.Further,the changes of image motion under the micro-vibration environment were evaluated by extracting the gray centroid of the images,and the experiment processes and results are deeply discussed.The results show that the firstorder frequency of the QZSD system is 0.114 Hz,and it is induced by a double pendulum system;the image motion of single flywheel spinning reached 0.015 pixels;whilst the image motion reached 0.03 pixels when three flywheels are combined spinning.These latest findings provide a beneficial theoretical and technical support for the development of spacecraft with 0·1″pointing accuracy.展开更多
An accurate phase shift extraction method for generalized phase-shifting interferometry is suggested. Based on the nearly random phase distribution of the diffraction field of the object, a singular formula is derived...An accurate phase shift extraction method for generalized phase-shifting interferometry is suggested. Based on the nearly random phase distribution of the diffraction field of the object, a singular formula is derived to calculate the unknown phase shift without the requirements of an iteration process or the selection of the correct value from two or more possible phase shift solutions as needed before. This method can be used in the cases of two or more frames with both smooth and diffusing object surfaces. Computer simulations and optical experiments have satisfactorily verified the efficiency and accuracy of this method.展开更多
The castings defects are affected by the melting volume change rate of material.The change rate has an important effect on running safety of the high temperature thermal storage chamber,too.But the characteristics of ...The castings defects are affected by the melting volume change rate of material.The change rate has an important effect on running safety of the high temperature thermal storage chamber,too.But the characteristics of existing measuring installations are complex structure,troublesome operation and low precision.In order to measure the melting volume change rate of material accurately and conveniently,a self-designed measuring instrument,self-heating probe instrument,and measuring method are described.Temperature in heating cavity is controlled by PID temperature controller;melting volume change rateυand molten density are calculated based on the melt volume which is measured by the instrument.Positive and negativeυrepresent expansion and shrinkage of the sample volume after melting,respectively.Taking eutectic LiF+CaF2 for example,its melting volume change rate and melting density at 1123 K are-20.6%and 2651 kg/m–3 measured by this instrument,which is only 0.71%smaller than literature value.Density and melting volume change rate of industry pure aluminum at 973 K and analysis pure NaCl at 1123 K are detected by the instrument too.The measure results are agreed with report values.Measuring error sources are analyzed and several improving measures are proposed.In theory,the measuring errors of the change rate and molten density which are measured by the self-designed instrument is nearly 1/20-1/50 of that measured by the refitted mandril thermal expansion instrument.The self-designed instrument and method have the advantages of simple structure,being easy to operate,extensive applicability for material,relatively high accuracy,and most importantly,temperature and sample vapor pressure have little effect on the measurement accuracy.The presented instrument and method solve the problems of complicated structure and procedures,and large measuring errors for the samples with high vapor pressure by existing installations.展开更多
Development of minimally invasive dry electrodes for recording biopotentials is presented. The detailed fabrication process is outlined. A dry electrode is formed by a number of microneedles. The lengths of the micron...Development of minimally invasive dry electrodes for recording biopotentials is presented. The detailed fabrication process is outlined. A dry electrode is formed by a number of microneedles. The lengths of the microneedles are about 150μm and the diameters are about 50μm. The tips of the microneedles are sharp enough to penetrate into the skin. The silver/silver chloride is grown on microneedle arrays and demonstrates good character. The electrocardiogram shows that the dry electrode is suitable for recording biopotentials.展开更多
A mobile molecular Doppler wind lidar （DWL） based on double-edge technique is presented for wind measurement at altitudes from 10 km to 40 km. A triple Fabry-Perot etalon is employed as a frequency discriminator to ...A mobile molecular Doppler wind lidar （DWL） based on double-edge technique is presented for wind measurement at altitudes from 10 km to 40 km. A triple Fabry-Perot etalon is employed as a frequency discriminator to determine the Doppler shift proportional to the wind velocity. The lidar operates at 355 nm with a 45-cm aperture telescope and a matching azimuth-over-elevation scanner that can provide full hemispherical pointing. In order to guarantee the wind accuracy, different forms of calibration function of detectors in different count rates response range would be especially valuable. The accuracy of wind velocity iteration is improved greatly because of application of the calibration function of linearity at the ultra low light intensity especially at altitudes from 10 km to 40 km. The calibration functions of nonlinearity make the transmission of edge channel 1 and edge channel 2 increase 38.9% and 27.7% at about 1 M count rates, respectively. The dynamic range of wind field measurement may also be extended because of consideration of the response function of detectors in their all possible operating range.展开更多
In order to solve the problem that the vulcanizing agent utilization rate is low and the dilution effect of copper slag is poor,the vortex stirring dilution method was used to improve the conditions of the dilution ki...In order to solve the problem that the vulcanizing agent utilization rate is low and the dilution effect of copper slag is poor,the vortex stirring dilution method was used to improve the conditions of the dilution kinetics and copper recovery.The water model was used to simulate the effect of copper slag dilution.Under the premise of keeping the Reynolds number consistent,silicone oil and glass beads were used instead of copper slag and vulcanizing agent.Based on the relationship between voltage and concentration,the PC6D dual-channel particle concentration measuring instrument was used to study the stirring speed and the insertion depth of the stirring paddle in model experiments,and the suitable conditions were speed 250 rpm and insertion depth 70 mm.The fire dilution of copper slag was done under the conditions.After stirring and sedimentation,the Fe_(3)O_(4) in slag decreased from 22.58% to 4.65%,and the copper content of the slag decreased from 2.94% to 0.34%.The copper recovery was 88.44%.展开更多
The time-dependent quantum wave packet method is used to investigate the dynamics for the Li2 molecule, and the time-resolved photoelectron spectra （TRPES） of the Li2 molecule are calculated. At the short delay time...The time-dependent quantum wave packet method is used to investigate the dynamics for the Li2 molecule, and the time-resolved photoelectron spectra （TRPES） of the Li2 molecule are calculated. At the short delay time, the particular phenomenon of TRPES with four peaks is qualitatively interpreted in a dressed state picture by analyzing wave packet motion on light-induced potential （LIP）. The significant difference in the electronic structure of E1∑g^＋ between the inner and outer turning points has an impact on the TRPES. The control for the first excited state A1∑u^＋ of the initial wave packet is discussed.展开更多
The contribution of higher harmonics to the movement of a micro rectangular cantilever in tapping mode AFM is investigated. The dependence between the phase lag of the higher harmonic components and tip-sample separat...The contribution of higher harmonics to the movement of a micro rectangular cantilever in tapping mode AFM is investigated. The dependence between the phase lag of the higher harmonic components and tip-sample separation are found to be an order of magnitude higher than the base one, reflecting an increasing sensitivity to local variations of surface properties compared to the normal phase signal The strong correlation between the higher harmonic amplitude and average sample deformation implies that the higher harmonic amplitude can be taken to monitor the tapping force or as feedback variable to fulfill a constant repulsive force mode.展开更多
A cw terahertz （THz） transmission imaging system is demonstrated and a high-quality THz image can be obtained using a pyroelectric detector. The factors that affect the imaging quality, such as the THz wavelength, s...A cw terahertz （THz） transmission imaging system is demonstrated and a high-quality THz image can be obtained using a pyroelectric detector. The factors that affect the imaging quality, such as the THz wavelength, spot size on the sample surface, step length of the motor, and frequency of the chopper, are theoretically and experimentally investigated. The experimental results show that the maximum resolution of the THz image can reach 0.4mm with the THz wavelength of 118.8μm, the spot size of 1.8mm and the step length of 0.25mm.展开更多
An adaptive fast multipole higher order boundary element method combining fast multipole （FM） with a higher order boundary element method is studied to solve the power frequency electric field （PFEF） of substation...An adaptive fast multipole higher order boundary element method combining fast multipole （FM） with a higher order boundary element method is studied to solve the power frequency electric field （PFEF） of substations. In this new technique, the iterative equation solver GMRES is used in the FM, where matrix-vector multiplications are calculated using fast multipole expansions. The coefficients in the preconditioner for GMRES are stored and are used repeatedly in the direct evaluations of the near-field contributions. Then a 500kV outdoor substation is modeled and the PFEF of the substation is analyzed by the novel algorithm and other conventional methods. The results show that, in computational cost and the storages capability aspects, the algorithm proposed in this study has obvious advantages. It is suitable for the calculation of the large-scale PFEF in complex substations and the design of electromagnetic compatibility.展开更多
Based on a comprehensive study of various algorithms, the automatic recognition of traditional ocular optical measuring instruments is realized. Taking a universal tools microscope(UTM) lens view image as an example, ...Based on a comprehensive study of various algorithms, the automatic recognition of traditional ocular optical measuring instruments is realized. Taking a universal tools microscope(UTM) lens view image as an example, a 2-layer automatic recognition model for data reading is established after adopting a series of pre-processing algorithms. This model is an optimal combination of the correlation-based template matching method and a concurrent back propagation(BP) neural network. Multiple complementary feature extraction is used in generating the eigenvectors of the concurrent network. In order to improve fault-tolerance capacity, rotation invariant features based on Zernike moments are extracted from digit characters and a 4-dimensional group of the outline features is also obtained. Moreover, the operating time and reading accuracy can be adjusted dy-namically by setting the threshold value. The experimental result indicates that the newly developed algorithm has optimal recognition precision and working speed. The average reading ratio can achieve 97.23%. The recognition method can automatically obtain the results of optical measuring instruments rapidly and stably without modifying their original structure, which meets the application requirements.展开更多
The mutant strains of aspergillus oryzae （HP300a） are screened under 300 MPa for 20min. Compared with the control strains, the screened mutant strains have unique properties such as genetic stability, rapid growth, ...The mutant strains of aspergillus oryzae （HP300a） are screened under 300 MPa for 20min. Compared with the control strains, the screened mutant strains have unique properties such as genetic stability, rapid growth, lots of spores, and high protease activity. Random amplified polymorphic DNA （RAPD） and inter simple sequence repeats （ISSR） are used to analyze the DNA fingerprinting of HP300a and the control strains. There are 67.9% and 51.3% polymorphic bands obtained by these two markers, respectively, indicating significant genetic variations between HP300a and the control strains. In addition, comparison of HP300a arid the control strains, the genetic distances of random sequence and simple sequence repeat of DNA are 0.51 and 0.34, respectively.展开更多
We report the terahertz direct detection characteristics of a spiral antenna coupled NbN superconducting hot- electron bolometer （HEB） at a bath temperature of 4.2K. Thermal conductance determined from resistance tr...We report the terahertz direct detection characteristics of a spiral antenna coupled NbN superconducting hot- electron bolometer （HEB） at a bath temperature of 4.2K. Thermal conductance determined from resistance transition curves with different bias currents is found to be 3 × 10 7 W/K. The device shows a read-out circuit limited noise equivalent power （NEP） of 4.5 × 10-12 W/Hz/2 at 4.2 K with a home-made transimpedance amplifier operating at room temperature.展开更多
A simple and effective way to measure the group velocity ofphotonic crystal waveguides （PCWGs） is developed by using a fiber Mach-Zehnder interferometer. A PCWG with perfect air-bridge structure is fabricated and sl...A simple and effective way to measure the group velocity ofphotonic crystal waveguides （PCWGs） is developed by using a fiber Mach-Zehnder interferometer. A PCWG with perfect air-bridge structure is fabricated and slow light with group velocity slower than c/80 is demonstrated.展开更多
An optical readout uncooled infrared detector, employing a substrate-free focal plane array with pitch size 60μm, is established. The reflector deformation induced by the stress mismatching of the bi-layer structure ...An optical readout uncooled infrared detector, employing a substrate-free focal plane array with pitch size 60μm, is established. The reflector deformation induced by the stress mismatching of the bi-layer structure is discussed and, in turn, a universal solution to determine both the optical readout sensitivity and the optimal filter position is found. By applying this solution, the optical readout sensitivity for the ideal plane reflector could theoretically increase by 80% as compared with the conventional operation, and the sensitivity loss caused by the reflector deformation can also be reduced to a reasonable level.展开更多
A hybrid high-frequency method is proposed to analyze the bistatic electromagnetic scattering of the ship target on a very large two-dimensional randomly rough sea surface. The scattering of the ship-sea model is eva...A hybrid high-frequency method is proposed to analyze the bistatic electromagnetic scattering of the ship target on a very large two-dimensional randomly rough sea surface. The scattering of the ship-sea model is evaluated with the method of equivalent currents （MEC）. The iterative physical optics method （IPO） is utilized to study the electromagnetic coupling effect caused by the hull and rough surface. The shadowing correction based on the Z-Buffer technology is introduced to eliminate the effects of the irrelevant scattering resources. The validity of the hybrid method is confirmed by the SAR simulation results and the scattering property of the ship-sea model is discussed.展开更多
文摘We use nuclear magnetic resonance （NMR） and centrifugation to measure the original water saturation and mobile water saturation of cores from the Xujiahe low permeability sandstone gas reservoir, and compare the NMR results with the corresponding field data. It is shown that the NMR water saturation after 300psi centrifugation effectively represents the original water saturation measured by weighing fresh cores. There is a good correlation between mobile water saturation and the water production performance of the corresponding gas wells. The critical mobile water saturation whether reservoir produces water of the Xujiahe low permeability sandstone gas is 6%. The higher the mobile water saturation, the greater the water production rate of gas well. This indicates that well＇s water production performance can be forecasted by mobile water saturation of cores.
文摘目的 比较可用于卫生技术评估中的生产率损失测量工具,厘清可用于卫生技术评估中的生产率损失测量工具的应用条件,以期为相关研究者在选择生产率损失的测量工具时提供参考。方法 检索PubMed、Web of Science、中国知网、万方、维普等中外数据库,检索时间从数据库建库至2021年11月,由2名研究者按照纳入与排除标准独立筛选文献、识别生产率损失测量工具、提取资料。结果 共识别出5种可用于卫生技术评估领域中的生产率损失测量工具,包括工作能力和活动受损量表(work productivity activity and impairment,WPAI)、工作能力局限调查问卷(work limitations questionnaire,WLQ)、健康与工作绩效问卷(Health and Work Performance Questionnaire,HPQ)、损失产能的估值(Valuation of Lost Productivity Questionnaire,VOLP)和医疗技术评估研究院(Institute for Medical Technology Assessment,IMTA)的生产力成本问卷(IMTA Productivity Questionnaire,IPCQ)。其中WPAI和WLQ是测量属性证据最为充足的工具;VOLP是成本涵盖最全的工具;WLQ是数据敏感性最强的工具;IPCQ是货币转化方法最多的工具;WPAI是获取使用最方便的工具。结论 对于卫生技术评估中的生产率损失测量的标准工具尚未存在统一共识,研究者可根据自身研究选取生产率损失测量工具。
基金supported(in part)by the Entrusted Project of National commission on health and health of China(No.2019099)the National Key Research and Development Plan of China(2016YFC0106300)the Nature Science Foundation of Hubei Province(2019FFB03902)。
文摘Methodological quality(risk of bias)assessment is an important step before study initiation usage.Therefore,accurately judging study type is the first priority,and the choosing proper tool is also important.In this review,we introduced methodological quality assessment tools for randomized controlled trial(including individual and cluster),animal study,non-randomized interventional studies(including follow-up study,controlled before-and-after study,before-after/pre-post study,uncontrolled longitudinal study,interrupted time series study),cohort study,case-control study,cross-sectional study(including analytical and descriptive),observational case series and case reports,comparative effectiveness research,diagnostic study,health economic evaluation,prediction study(including predictor finding study,prediction model impact study,prognostic prediction model study),qualitative study,outcome measurement instruments(including patient-reported outcome measure development,content validity,structural validity,internal consistency,cross-cultural validity/measurement invariance,reliability,measurement error,criterion validity,hypotheses testing for construct validity,and responsiveness),systematic review and meta-analysis,and clinical practice guideline.The readers of our review can distinguish the types of medical studies and choose appropriate tools.In one word,comprehensively mastering relevant knowledge and implementing more practices are basic requirements for correctly assessing the methodological quality.
基金This project is supported by National Natural Science Foundation of China(No.50135050).
文摘A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrument, consists of different types of intelligent virtualinstrument (IVI) through individual components together as building blocks and can be displayeddirectly on the computer screen. This is a new concept of measuring instrument, and also animportant breakthrough after virtual instrument (VI). Virtual control makes instrument resourcesobtain further exploitation. It brings about a fundamental change to the design and manufacturingmode. The instrument therefore, can not only be produced directly inside a PC, but the product isinvolved in the 'green product' system. So far, all the present digital instruments will grow to bereplaced by intelligent control with green characteristics.
基金the support from the National Natural Science Foundation of China(No.51905034,52275083)。
文摘There exists an increasing need for Milli-Arc-Seconds(MAS)accuracy pointing measurement for current and future space systems.To meet the 0.1″space pointing measurement accuracy requirements of spacecraft in future,the influence of spacecraft micro-vibration on a 0.1″Space Pointing Measuring Instrument(SPMI)is studied.A Quasi-Zero Stiffness Device(QZSD)with adaptive adjustment and variable stroke was proposed.Then,a series of micro-vibration experiments of the SPMI were carried out.The influence of the micro-vibration generated by Guidance Navigation Control(GNC)attitude control components under different attitudes on the SPMI was analyzed.Point spread function of image motion in micro-vibration was also derived.Further,the changes of image motion under the micro-vibration environment were evaluated by extracting the gray centroid of the images,and the experiment processes and results are deeply discussed.The results show that the firstorder frequency of the QZSD system is 0.114 Hz,and it is induced by a double pendulum system;the image motion of single flywheel spinning reached 0.015 pixels;whilst the image motion reached 0.03 pixels when three flywheels are combined spinning.These latest findings provide a beneficial theoretical and technical support for the development of spacecraft with 0·1″pointing accuracy.
基金Supported by the National Natural Science Foundation of China under Grant Nos 60977006, 60777008 and 40704021, and the Fund from China University of Petroleum （East China） under Grant No Y081818.
文摘An accurate phase shift extraction method for generalized phase-shifting interferometry is suggested. Based on the nearly random phase distribution of the diffraction field of the object, a singular formula is derived to calculate the unknown phase shift without the requirements of an iteration process or the selection of the correct value from two or more possible phase shift solutions as needed before. This method can be used in the cases of two or more frames with both smooth and diffusing object surfaces. Computer simulations and optical experiments have satisfactorily verified the efficiency and accuracy of this method.
基金supported by Gansu Provincial Critical Patented Projects of China(Grant No.1101ZSB117)Gansu Provincial Science and Technology Pillar Program of China(Grant No.1002ZSB018)
文摘The castings defects are affected by the melting volume change rate of material.The change rate has an important effect on running safety of the high temperature thermal storage chamber,too.But the characteristics of existing measuring installations are complex structure,troublesome operation and low precision.In order to measure the melting volume change rate of material accurately and conveniently,a self-designed measuring instrument,self-heating probe instrument,and measuring method are described.Temperature in heating cavity is controlled by PID temperature controller;melting volume change rateυand molten density are calculated based on the melt volume which is measured by the instrument.Positive and negativeυrepresent expansion and shrinkage of the sample volume after melting,respectively.Taking eutectic LiF+CaF2 for example,its melting volume change rate and melting density at 1123 K are-20.6%and 2651 kg/m–3 measured by this instrument,which is only 0.71%smaller than literature value.Density and melting volume change rate of industry pure aluminum at 973 K and analysis pure NaCl at 1123 K are detected by the instrument too.The measure results are agreed with report values.Measuring error sources are analyzed and several improving measures are proposed.In theory,the measuring errors of the change rate and molten density which are measured by the self-designed instrument is nearly 1/20-1/50 of that measured by the refitted mandril thermal expansion instrument.The self-designed instrument and method have the advantages of simple structure,being easy to operate,extensive applicability for material,relatively high accuracy,and most importantly,temperature and sample vapor pressure have little effect on the measurement accuracy.The presented instrument and method solve the problems of complicated structure and procedures,and large measuring errors for the samples with high vapor pressure by existing installations.
基金Supported by the National Natural Science Foundation of China under Grant Nos 60776024, 60877035 and 90820002, tile National High-Technology Research and Development Program of China under Grant Nos 2007AA03Z427, 2007AA04Z329 and 2007AA04Z254.
文摘Development of minimally invasive dry electrodes for recording biopotentials is presented. The detailed fabrication process is outlined. A dry electrode is formed by a number of microneedles. The lengths of the microneedles are about 150μm and the diameters are about 50μm. The tips of the microneedles are sharp enough to penetrate into the skin. The silver/silver chloride is grown on microneedle arrays and demonstrates good character. The electrocardiogram shows that the dry electrode is suitable for recording biopotentials.
文摘A mobile molecular Doppler wind lidar （DWL） based on double-edge technique is presented for wind measurement at altitudes from 10 km to 40 km. A triple Fabry-Perot etalon is employed as a frequency discriminator to determine the Doppler shift proportional to the wind velocity. The lidar operates at 355 nm with a 45-cm aperture telescope and a matching azimuth-over-elevation scanner that can provide full hemispherical pointing. In order to guarantee the wind accuracy, different forms of calibration function of detectors in different count rates response range would be especially valuable. The accuracy of wind velocity iteration is improved greatly because of application of the calibration function of linearity at the ultra low light intensity especially at altitudes from 10 km to 40 km. The calibration functions of nonlinearity make the transmission of edge channel 1 and edge channel 2 increase 38.9% and 27.7% at about 1 M count rates, respectively. The dynamic range of wind field measurement may also be extended because of consideration of the response function of detectors in their all possible operating range.
基金Funded by the National Natural Science Foundation of China(52004284)the Fundamental Research Funds from the Central University of the Ministry of Education of China(2020QN55)the China Postdoctoral Science Foundation(2019M661979)。
文摘In order to solve the problem that the vulcanizing agent utilization rate is low and the dilution effect of copper slag is poor,the vortex stirring dilution method was used to improve the conditions of the dilution kinetics and copper recovery.The water model was used to simulate the effect of copper slag dilution.Under the premise of keeping the Reynolds number consistent,silicone oil and glass beads were used instead of copper slag and vulcanizing agent.Based on the relationship between voltage and concentration,the PC6D dual-channel particle concentration measuring instrument was used to study the stirring speed and the insertion depth of the stirring paddle in model experiments,and the suitable conditions were speed 250 rpm and insertion depth 70 mm.The fire dilution of copper slag was done under the conditions.After stirring and sedimentation,the Fe_(3)O_(4) in slag decreased from 22.58% to 4.65%,and the copper content of the slag decreased from 2.94% to 0.34%.The copper recovery was 88.44%.
基金Supported by the National Natural Science Foundation of China under Grant Nos 60577050 and 10574039, the Key Project of Science and Technology Research of Education Ministry of China under Grant No 206084, the Innovation Scientists and Technicians Troop Construction Projects of Henan Province under Grant No 084100510011, the Innovation Talents of Institution of Higher Education of Henan Province under Grant No 2006KYCX002.
文摘The time-dependent quantum wave packet method is used to investigate the dynamics for the Li2 molecule, and the time-resolved photoelectron spectra （TRPES） of the Li2 molecule are calculated. At the short delay time, the particular phenomenon of TRPES with four peaks is qualitatively interpreted in a dressed state picture by analyzing wave packet motion on light-induced potential （LIP）. The significant difference in the electronic structure of E1∑g^＋ between the inner and outer turning points has an impact on the TRPES. The control for the first excited state A1∑u^＋ of the initial wave packet is discussed.
文摘The contribution of higher harmonics to the movement of a micro rectangular cantilever in tapping mode AFM is investigated. The dependence between the phase lag of the higher harmonic components and tip-sample separation are found to be an order of magnitude higher than the base one, reflecting an increasing sensitivity to local variations of surface properties compared to the normal phase signal The strong correlation between the higher harmonic amplitude and average sample deformation implies that the higher harmonic amplitude can be taken to monitor the tapping force or as feedback variable to fulfill a constant repulsive force mode.
文摘A cw terahertz （THz） transmission imaging system is demonstrated and a high-quality THz image can be obtained using a pyroelectric detector. The factors that affect the imaging quality, such as the THz wavelength, spot size on the sample surface, step length of the motor, and frequency of the chopper, are theoretically and experimentally investigated. The experimental results show that the maximum resolution of the THz image can reach 0.4mm with the THz wavelength of 118.8μm, the spot size of 1.8mm and the step length of 0.25mm.
基金Supported by the National Natural Science Foundations of China under Grant No 50877082, the National Basic Research Program of China under Grant No 2009CB724506, and the Specialized Research Fund for State Key Laboratory of Power Transmission Equipment ＆ System Security and New Technology under Grant No 2007DA10512708304.
文摘An adaptive fast multipole higher order boundary element method combining fast multipole （FM） with a higher order boundary element method is studied to solve the power frequency electric field （PFEF） of substations. In this new technique, the iterative equation solver GMRES is used in the FM, where matrix-vector multiplications are calculated using fast multipole expansions. The coefficients in the preconditioner for GMRES are stored and are used repeatedly in the direct evaluations of the near-field contributions. Then a 500kV outdoor substation is modeled and the PFEF of the substation is analyzed by the novel algorithm and other conventional methods. The results show that, in computational cost and the storages capability aspects, the algorithm proposed in this study has obvious advantages. It is suitable for the calculation of the large-scale PFEF in complex substations and the design of electromagnetic compatibility.
文摘Based on a comprehensive study of various algorithms, the automatic recognition of traditional ocular optical measuring instruments is realized. Taking a universal tools microscope(UTM) lens view image as an example, a 2-layer automatic recognition model for data reading is established after adopting a series of pre-processing algorithms. This model is an optimal combination of the correlation-based template matching method and a concurrent back propagation(BP) neural network. Multiple complementary feature extraction is used in generating the eigenvectors of the concurrent network. In order to improve fault-tolerance capacity, rotation invariant features based on Zernike moments are extracted from digit characters and a 4-dimensional group of the outline features is also obtained. Moreover, the operating time and reading accuracy can be adjusted dy-namically by setting the threshold value. The experimental result indicates that the newly developed algorithm has optimal recognition precision and working speed. The average reading ratio can achieve 97.23%. The recognition method can automatically obtain the results of optical measuring instruments rapidly and stably without modifying their original structure, which meets the application requirements.
基金Supported by the National Natural Science Foundation of China under Grant Nos 20773043, 21073071 and 10979001, and the National Basic Research Program of China under Grant Nos 2005CB724400 and 2007CB808000.
文摘The mutant strains of aspergillus oryzae （HP300a） are screened under 300 MPa for 20min. Compared with the control strains, the screened mutant strains have unique properties such as genetic stability, rapid growth, lots of spores, and high protease activity. Random amplified polymorphic DNA （RAPD） and inter simple sequence repeats （ISSR） are used to analyze the DNA fingerprinting of HP300a and the control strains. There are 67.9% and 51.3% polymorphic bands obtained by these two markers, respectively, indicating significant genetic variations between HP300a and the control strains. In addition, comparison of HP300a arid the control strains, the genetic distances of random sequence and simple sequence repeat of DNA are 0.51 and 0.34, respectively.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10803021, 10621303, 10933005 and 10778602, the National Basic Research Program of China under Grant No 2010CB327401, and CAS Key Lab for Radio Astronomy.
文摘We report the terahertz direct detection characteristics of a spiral antenna coupled NbN superconducting hot- electron bolometer （HEB） at a bath temperature of 4.2K. Thermal conductance determined from resistance transition curves with different bias currents is found to be 3 × 10 7 W/K. The device shows a read-out circuit limited noise equivalent power （NEP） of 4.5 × 10-12 W/Hz/2 at 4.2 K with a home-made transimpedance amplifier operating at room temperature.
基金Supported by the National Natural Science Foundation of China under Grant No 60537010, and the National Basic Research Program of China under Grant Nos 2007CB307004 and 2006CB302804.
文摘A simple and effective way to measure the group velocity ofphotonic crystal waveguides （PCWGs） is developed by using a fiber Mach-Zehnder interferometer. A PCWG with perfect air-bridge structure is fabricated and slow light with group velocity slower than c/80 is demonstrated.
基金Supported by grants from by the Natural Science Foundation of China under Grant Nos 10732080, 10627201 and 10872191, and the National Basic Research Program of China under Grant No 2006CB300404.
文摘An optical readout uncooled infrared detector, employing a substrate-free focal plane array with pitch size 60μm, is established. The reflector deformation induced by the stress mismatching of the bi-layer structure is discussed and, in turn, a universal solution to determine both the optical readout sensitivity and the optimal filter position is found. By applying this solution, the optical readout sensitivity for the ideal plane reflector could theoretically increase by 80% as compared with the conventional operation, and the sensitivity loss caused by the reflector deformation can also be reduced to a reasonable level.
基金Supported by the National Natural Science Foundation of China under Grant No 60871070, the National Pre-research Foundation and the Foundation of National Electromagnetic Scattering Laboratory.
文摘A hybrid high-frequency method is proposed to analyze the bistatic electromagnetic scattering of the ship target on a very large two-dimensional randomly rough sea surface. The scattering of the ship-sea model is evaluated with the method of equivalent currents （MEC）. The iterative physical optics method （IPO） is utilized to study the electromagnetic coupling effect caused by the hull and rough surface. The shadowing correction based on the Z-Buffer technology is introduced to eliminate the effects of the irrelevant scattering resources. The validity of the hybrid method is confirmed by the SAR simulation results and the scattering property of the ship-sea model is discussed.
