The flange butt joints of 1 mm-thick galvanized steel sheets were brazed with CuSi3 as filler metal at different laser heating modes.The microstructures and element distributions of joint interface were investigated b...The flange butt joints of 1 mm-thick galvanized steel sheets were brazed with CuSi3 as filler metal at different laser heating modes.The microstructures and element distributions of joint interface were investigated by SEM and EDS.The results show that there is no obvious interface layer with the circular individual beam heating and lamellar Fe-Si intermetallic compound layer is found with dual-beam laser spot heating.With the irradiation of rectangular laser spot,the joint interface layer is also formed.The layer thickness is larger than that of dual-beam brazing and the layer shape is flat so that intermetallic compounds trend to grow into cellular crystals.Moreover,the interface layer shape also depends on its position in the joint.Under the high heat input,dendritic or granular intermetallic compounds dispersively distribute in brazing seam adjacent to the interface,which is caused by the melting or dissolving of the base metal.According to the results,the brazing quality can be controlled by laser heating mode and processing parameters.展开更多
In recent years, cyber attacks have posed great challenges to the development of cyber-physical systems. It is of great significance to study secure state estimation methods to ensure the safe and stable operation of ...In recent years, cyber attacks have posed great challenges to the development of cyber-physical systems. It is of great significance to study secure state estimation methods to ensure the safe and stable operation of the system. This paper proposes a secure state estimation for multi-input and multi-output continuous-time linear cyber-physical systems with sparse actuator and sensor attacks. First, for sparse sensor attacks, we propose an adaptive switching mechanism to mitigate the impact of sparse sensor attacks by filtering out their attack modes. Second, an unknown input sliding mode observer is designed to not only observe the system states, sensor attack signals, and measurement noise present in the system but also counteract the effects of sparse actuator attacks through an unknown input matrix. Finally, for the design of an unknown input sliding mode state observer, the feasibility of the observing system is demonstrated by means of Lyapunov functions. Additionally, simulation experiments are conducted to show the effectiveness of this method.展开更多
A new multi function voltage-mode universal biquadratic filter using single Voltage Differencing Differential Input Buffered Amplifier (VD-DIBA), two capacitors and one resistor is proposed. The proposed configuration...A new multi function voltage-mode universal biquadratic filter using single Voltage Differencing Differential Input Buffered Amplifier (VD-DIBA), two capacitors and one resistor is proposed. The proposed configuration has four inputs and one output and can realize all the five standard filters from the same circuit configuration. The presented biquad filter offers low active and passive sensitivities. The validity of proposed universal biquadratic filter has been verified by SPICE simulation using 0.35 μm MIETEC technology.展开更多
In modern vehicles, electronic throttle(ET) has been widely utilized to control the airflow into gasoline engine. To solve the control difficulties with an ET, such as strong nonlinearity,unknown model parameters and ...In modern vehicles, electronic throttle(ET) has been widely utilized to control the airflow into gasoline engine. To solve the control difficulties with an ET, such as strong nonlinearity,unknown model parameters and input saturation constraints,an adaptive sliding-mode tracking control strategy for an ET is presented. Compared with the existing control strategies for an ET, input saturation constraints and parameter uncertainties are adequately considered in the proposed control strategy. At first, the nonlinear dynamic model for control of an ET is described. According to the dynamical model, the nonlinear adaptive sliding-mode tracking control method is presented,where parameter adaptive laws and auxiliary design system are employed. Parameter adaptive law is given to estimate the unknown parameter with an ET. An auxiliary system is designed,and its state is utilized in the tracking control method to handle the input saturation. Stability proof and analysis of the adaptive sliding-mode control method is performed by using Lyapunov stability theory. Finally, the reliability and feasibility of the proposed control strategy are evaluated by computer simulation.Simulation research shows that the proposed sliding-mode control strategy can provide good control performance for an ET.展开更多
Asymptotic stability of nonlinear fractional order affine systems with bounded inputs is dealt.The main contribution is to design a new bounded fractional order chattering free sliding mode controller in which the sys...Asymptotic stability of nonlinear fractional order affine systems with bounded inputs is dealt.The main contribution is to design a new bounded fractional order chattering free sliding mode controller in which the system states converge to the sliding surface at a determined finite time.To eliminate the chattering in the sliding mode and make the input controller bounded,hyperbolic tangent is used for designing the proposed fractional order sliding surface.Finally,the stability of the closed loop system using this bounded sliding mode controller is guaranteed by Lyapunov theory.A comparison with the integer order case is then presented and fractional order nonlinear polynomial systems are also studied as the special case.Finally,simulation results are provided to show the effectiveness of the designed controller.展开更多
This paper deals with the design of a novel nonsingular terminal sliding mode controller for finite-time synchro-nization of two different chaotic systems with fully unknown parameters and nonlinear inputs. We propose...This paper deals with the design of a novel nonsingular terminal sliding mode controller for finite-time synchro-nization of two different chaotic systems with fully unknown parameters and nonlinear inputs. We propose a novel nonsingular terminal sliding surface and prove its finite-time convergence to zero. We assume that both the master＇s and the slave＇s system parameters are unknown in advance. Proper adaptation laws are derived to tackle the unknown parameters. An adaptive sliding mode control law is designed to ensure the existence of the sliding mode in finite time. We prove that both reaching and sliding mode phases are stable in finite time. An estimation of convergence time is given. Two illustrative examples show the effectiveness and usefulness of the proposed technique. It is worthwhile noticing that the introduced nonsingular terminal sliding mode can be applied to a wide variety of nonlinear control problems.展开更多
To solve the problem of attitude tracking of a rigid spacecraft with an either known or measurable desired attitude trajectory, three types of time-varying sliding mode controls are introduced under consideration of c...To solve the problem of attitude tracking of a rigid spacecraft with an either known or measurable desired attitude trajectory, three types of time-varying sliding mode controls are introduced under consideration of control input constraints. The sliding surfaces of the three types initially pass arbitrary initial values of the system, and then shift or rotate to reach predetermined ones. This way, the system trajectories are always on the sliding surfaces, and the system work is guaranteed to have robustness against parameter uncertainty and external disturbances all the time. The controller parameters are optimized by means of genetic algorithm to minimize the index consisting of the weighted index of squared error （ISE） of the system and the weighted penalty term of violation of control input constraint. The stability is verified with Lyapunov method. Compared with the conventional sliding mode control, simulation results show the proposed algorithm having better robustness against inertia matrix uncertainty and external disturbance torques.展开更多
This paper presents an optimization method of designing the integral sliding mode （ISM） based composite nonlinear feedback （CNF） controller for a class of low order linear systems with input saturation. The optima...This paper presents an optimization method of designing the integral sliding mode （ISM） based composite nonlinear feedback （CNF） controller for a class of low order linear systems with input saturation. The optimal CNF control is first designed as a nominal control to yield high tracking speed and low overshoot. The selection of all the tuning parameters for the CNF control law is turned into a minimization problem and solved automatically by particle swarm optimization （PSO） algorithm. Subsequently, the discontinuous control law is introduced to reject matched disturbances. Then, the optimal ISM-CNF control law is achieved as the sum of the optimal CNF control law and the discontinuous control law. The effectiveness of the optimal ISM-CNF controller is verified by comparing with a step by step designed one. High tracking performance is achieved by applying the optimal ISM-CNF controller to the tracking control of the micromirror.展开更多
A finite-time controller is designed for a class of nonlinear systems subject to sector nonlinear inputs. A novel and simple approach is suggested based on the finite-time control principle. The designed sliding-mode ...A finite-time controller is designed for a class of nonlinear systems subject to sector nonlinear inputs. A novel and simple approach is suggested based on the finite-time control principle. The designed sliding-mode controller can drive a chaotic system to track a smooth target signal in a finite time. The chaotic Duffing-Holmes oscillator is used for verification and demonstration.展开更多
The mode switching between spatial multiplexing （SM） and space-time block code （STBC） diversity is investigated for the multiple-input multiple-output （MIMO） automatic repeat request （ARQ） system. Five importa...The mode switching between spatial multiplexing （SM） and space-time block code （STBC） diversity is investigated for the multiple-input multiple-output （MIMO） automatic repeat request （ARQ） system. Five important practical factors are considered in the proposed switching scheme： transmit correlation, ARQ technique, packet loss probability （PLP） constraint, discrete rate transmission （DRT） and channel coding. Under the spatially correlated channel, the distributions of the post signal-to-interference-plus- noise ratio （SiNR） for the SM mode and the STBC mode are obtained by using Gamma approximations. Then this paper derives the closed-form expressions of the PLP and the throughput for different modes when the ARQ technique is employed, based on which the mode switching algorithm is proposed to improve the spectral efficency. In the simulation, the correction of the expressions is first verified. Then, the significant gain observed by the proposed algorithm is presented. Since the switching point is the key parameter to implement the mode switching, this paper also shows how the switching point is affected by the practical factors considered.展开更多
In this paper, a voltage oriented control strategy for three-level PWM rectifier based on Sliding Mode Control (SMC) is introduced in order to obtain fast and accurate response of dc-bus voltage. To verify the validit...In this paper, a voltage oriented control strategy for three-level PWM rectifier based on Sliding Mode Control (SMC) is introduced in order to obtain fast and accurate response of dc-bus voltage. To verify the validity of the analysis and the feasibility of the proposed control method a set of simulation tests have been conducted using Matlab/Simulink. The simulation results show that compared to the conventional PI controller, the SMC can reduce drastically the three-level rectifier’s voltage fluctuation and improve the dynamic response of dc-bus significantly.展开更多
We investigate the projective synchronization of different chaotic systems with nonlinearity inputs. Based on the adaptive technique, sliding mode control method and pole assignment technique, a novel adaptive project...We investigate the projective synchronization of different chaotic systems with nonlinearity inputs. Based on the adaptive technique, sliding mode control method and pole assignment technique, a novel adaptive projective synchro- nization scheme is proposed to ensure the drive system and the response system with nonlinearity inputs can be rapidly synchronized up to the given scaling factor.展开更多
In this study an indirect adaptive sliding mode control (SMC) based on a fuzzy logic scheme is proposed to strengthen the tracking control performance of a general class of multi-input multi-output (MIMO) nonlinear un...In this study an indirect adaptive sliding mode control (SMC) based on a fuzzy logic scheme is proposed to strengthen the tracking control performance of a general class of multi-input multi-output (MIMO) nonlinear uncertain systems. Combining reaching law approach and fuzzy universal approximation theorem, the proposed design procedure combines the advantages of fuzzy logic control, adaptive control and sliding mode control. The stability of the control systems is proved in the sense of the Lyapunov second stability theorem. Two simulation studies are presented to demonstrate the effectiveness of our new hybrid control algorithm.展开更多
This paper deals with the problem of delay size stability analysis of single input-delayed linear and nonlinear systems. Conventional reduction, reduction linked by sliding mode, and linear memoryless control approach...This paper deals with the problem of delay size stability analysis of single input-delayed linear and nonlinear systems. Conventional reduction, reduction linked by sliding mode, and linear memoryless control approaches are used for simple input-delayed systems to obtain the stability conditions. Several first order examples are investigated systematically to demonstrate the capabilities and limitations of the advanced stability analysis techniques including Lyapunov-Krasovskii functionals, Newton-Leibniz formula, and a newly addressed Lagrange mean value theorem. Numerical comparative results show the usefulness and effectiveness of the advanced delay size analysis techniques proposed in this paper.展开更多
基金Project(50275036) supported by the National Natural Science Foundation of China
文摘The flange butt joints of 1 mm-thick galvanized steel sheets were brazed with CuSi3 as filler metal at different laser heating modes.The microstructures and element distributions of joint interface were investigated by SEM and EDS.The results show that there is no obvious interface layer with the circular individual beam heating and lamellar Fe-Si intermetallic compound layer is found with dual-beam laser spot heating.With the irradiation of rectangular laser spot,the joint interface layer is also formed.The layer thickness is larger than that of dual-beam brazing and the layer shape is flat so that intermetallic compounds trend to grow into cellular crystals.Moreover,the interface layer shape also depends on its position in the joint.Under the high heat input,dendritic or granular intermetallic compounds dispersively distribute in brazing seam adjacent to the interface,which is caused by the melting or dissolving of the base metal.According to the results,the brazing quality can be controlled by laser heating mode and processing parameters.
基金supported by the National Science Foundation of China(Nos.62271293,61903238)the Natural Science Foundation of Shandong Province,China(No.ZR2021MF035)the Social Science Planning Project of Shandong Province,China(No.22CYYJ13).
文摘In recent years, cyber attacks have posed great challenges to the development of cyber-physical systems. It is of great significance to study secure state estimation methods to ensure the safe and stable operation of the system. This paper proposes a secure state estimation for multi-input and multi-output continuous-time linear cyber-physical systems with sparse actuator and sensor attacks. First, for sparse sensor attacks, we propose an adaptive switching mechanism to mitigate the impact of sparse sensor attacks by filtering out their attack modes. Second, an unknown input sliding mode observer is designed to not only observe the system states, sensor attack signals, and measurement noise present in the system but also counteract the effects of sparse actuator attacks through an unknown input matrix. Finally, for the design of an unknown input sliding mode state observer, the feasibility of the observing system is demonstrated by means of Lyapunov functions. Additionally, simulation experiments are conducted to show the effectiveness of this method.
文摘A new multi function voltage-mode universal biquadratic filter using single Voltage Differencing Differential Input Buffered Amplifier (VD-DIBA), two capacitors and one resistor is proposed. The proposed configuration has four inputs and one output and can realize all the five standard filters from the same circuit configuration. The presented biquad filter offers low active and passive sensitivities. The validity of proposed universal biquadratic filter has been verified by SPICE simulation using 0.35 μm MIETEC technology.
基金partially supported by the National Natural Science Foundation of China(61773189)Natural Science Fundamental of Liaoning Province(20170540443)the Program for Liaoning Innovative Research Team in University(LT2016006)
文摘In modern vehicles, electronic throttle(ET) has been widely utilized to control the airflow into gasoline engine. To solve the control difficulties with an ET, such as strong nonlinearity,unknown model parameters and input saturation constraints,an adaptive sliding-mode tracking control strategy for an ET is presented. Compared with the existing control strategies for an ET, input saturation constraints and parameter uncertainties are adequately considered in the proposed control strategy. At first, the nonlinear dynamic model for control of an ET is described. According to the dynamical model, the nonlinear adaptive sliding-mode tracking control method is presented,where parameter adaptive laws and auxiliary design system are employed. Parameter adaptive law is given to estimate the unknown parameter with an ET. An auxiliary system is designed,and its state is utilized in the tracking control method to handle the input saturation. Stability proof and analysis of the adaptive sliding-mode control method is performed by using Lyapunov stability theory. Finally, the reliability and feasibility of the proposed control strategy are evaluated by computer simulation.Simulation research shows that the proposed sliding-mode control strategy can provide good control performance for an ET.
文摘Asymptotic stability of nonlinear fractional order affine systems with bounded inputs is dealt.The main contribution is to design a new bounded fractional order chattering free sliding mode controller in which the system states converge to the sliding surface at a determined finite time.To eliminate the chattering in the sliding mode and make the input controller bounded,hyperbolic tangent is used for designing the proposed fractional order sliding surface.Finally,the stability of the closed loop system using this bounded sliding mode controller is guaranteed by Lyapunov theory.A comparison with the integer order case is then presented and fractional order nonlinear polynomial systems are also studied as the special case.Finally,simulation results are provided to show the effectiveness of the designed controller.
文摘This paper deals with the design of a novel nonsingular terminal sliding mode controller for finite-time synchro-nization of two different chaotic systems with fully unknown parameters and nonlinear inputs. We propose a novel nonsingular terminal sliding surface and prove its finite-time convergence to zero. We assume that both the master＇s and the slave＇s system parameters are unknown in advance. Proper adaptation laws are derived to tackle the unknown parameters. An adaptive sliding mode control law is designed to ensure the existence of the sliding mode in finite time. We prove that both reaching and sliding mode phases are stable in finite time. An estimation of convergence time is given. Two illustrative examples show the effectiveness and usefulness of the proposed technique. It is worthwhile noticing that the introduced nonsingular terminal sliding mode can be applied to a wide variety of nonlinear control problems.
文摘To solve the problem of attitude tracking of a rigid spacecraft with an either known or measurable desired attitude trajectory, three types of time-varying sliding mode controls are introduced under consideration of control input constraints. The sliding surfaces of the three types initially pass arbitrary initial values of the system, and then shift or rotate to reach predetermined ones. This way, the system trajectories are always on the sliding surfaces, and the system work is guaranteed to have robustness against parameter uncertainty and external disturbances all the time. The controller parameters are optimized by means of genetic algorithm to minimize the index consisting of the weighted index of squared error （ISE） of the system and the weighted penalty term of violation of control input constraint. The stability is verified with Lyapunov method. Compared with the conventional sliding mode control, simulation results show the proposed algorithm having better robustness against inertia matrix uncertainty and external disturbance torques.
基金This work was supported by National Natural Science Foundation of China （No. 61374036） and the Fundamental Research Funds for the Central Universities （No. SCUT 2014ZM0035）.
文摘This paper presents an optimization method of designing the integral sliding mode （ISM） based composite nonlinear feedback （CNF） controller for a class of low order linear systems with input saturation. The optimal CNF control is first designed as a nominal control to yield high tracking speed and low overshoot. The selection of all the tuning parameters for the CNF control law is turned into a minimization problem and solved automatically by particle swarm optimization （PSO） algorithm. Subsequently, the discontinuous control law is introduced to reject matched disturbances. Then, the optimal ISM-CNF control law is achieved as the sum of the optimal CNF control law and the discontinuous control law. The effectiveness of the optimal ISM-CNF controller is verified by comparing with a step by step designed one. High tracking performance is achieved by applying the optimal ISM-CNF controller to the tracking control of the micromirror.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 60374037 and 60574036）, the Specialized Research Fund for the Doctoral Program of Higher Education of China （Grant 20050055013）, and the Program for New Century Excellent Talents of China （NCET）.
文摘A finite-time controller is designed for a class of nonlinear systems subject to sector nonlinear inputs. A novel and simple approach is suggested based on the finite-time control principle. The designed sliding-mode controller can drive a chaotic system to track a smooth target signal in a finite time. The chaotic Duffing-Holmes oscillator is used for verification and demonstration.
基金supported by the Chinese Important National Science and Technology Specific Project(2010ZX03002-003-01)
文摘The mode switching between spatial multiplexing （SM） and space-time block code （STBC） diversity is investigated for the multiple-input multiple-output （MIMO） automatic repeat request （ARQ） system. Five important practical factors are considered in the proposed switching scheme： transmit correlation, ARQ technique, packet loss probability （PLP） constraint, discrete rate transmission （DRT） and channel coding. Under the spatially correlated channel, the distributions of the post signal-to-interference-plus- noise ratio （SiNR） for the SM mode and the STBC mode are obtained by using Gamma approximations. Then this paper derives the closed-form expressions of the PLP and the throughput for different modes when the ARQ technique is employed, based on which the mode switching algorithm is proposed to improve the spectral efficency. In the simulation, the correction of the expressions is first verified. Then, the significant gain observed by the proposed algorithm is presented. Since the switching point is the key parameter to implement the mode switching, this paper also shows how the switching point is affected by the practical factors considered.
文摘In this paper, a voltage oriented control strategy for three-level PWM rectifier based on Sliding Mode Control (SMC) is introduced in order to obtain fast and accurate response of dc-bus voltage. To verify the validity of the analysis and the feasibility of the proposed control method a set of simulation tests have been conducted using Matlab/Simulink. The simulation results show that compared to the conventional PI controller, the SMC can reduce drastically the three-level rectifier’s voltage fluctuation and improve the dynamic response of dc-bus significantly.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60971107 and 60973152)the Natural Science Foundation of Liaoning Province, China (Grant No. 20082165)
文摘We investigate the projective synchronization of different chaotic systems with nonlinearity inputs. Based on the adaptive technique, sliding mode control method and pole assignment technique, a novel adaptive projective synchro- nization scheme is proposed to ensure the drive system and the response system with nonlinearity inputs can be rapidly synchronized up to the given scaling factor.
文摘In this study an indirect adaptive sliding mode control (SMC) based on a fuzzy logic scheme is proposed to strengthen the tracking control performance of a general class of multi-input multi-output (MIMO) nonlinear uncertain systems. Combining reaching law approach and fuzzy universal approximation theorem, the proposed design procedure combines the advantages of fuzzy logic control, adaptive control and sliding mode control. The stability of the control systems is proved in the sense of the Lyapunov second stability theorem. Two simulation studies are presented to demonstrate the effectiveness of our new hybrid control algorithm.
文摘This paper deals with the problem of delay size stability analysis of single input-delayed linear and nonlinear systems. Conventional reduction, reduction linked by sliding mode, and linear memoryless control approaches are used for simple input-delayed systems to obtain the stability conditions. Several first order examples are investigated systematically to demonstrate the capabilities and limitations of the advanced stability analysis techniques including Lyapunov-Krasovskii functionals, Newton-Leibniz formula, and a newly addressed Lagrange mean value theorem. Numerical comparative results show the usefulness and effectiveness of the advanced delay size analysis techniques proposed in this paper.
