Aiming at overcoming the difficulties in integral forming of thin-walled tubes with complex shapes, a novel forming method by inner and outer pressure through viscous was proposed. In this method, by dividing large de...Aiming at overcoming the difficulties in integral forming of thin-walled tubes with complex shapes, a novel forming method by inner and outer pressure through viscous was proposed. In this method, by dividing large deformation of the part into inner and outer pressure forming deformations, the limit deformation of tube part can be increased by several times. Meanwhile, the principle of viscous inner and outer pressure forming was provided, and key problems during the forming process such as reduction of the wall-thickness and instability wrinkling were analyzed. Thereby, the complex curved surface super-alloy GH3044 thin-walled tube with varying diameter ratio of 1.35（the ratio between the maximum and minimum diameters of the part） can be integrally formed by this method. The experimental surface of the formed part is superior in quality and the wall-thickness distribution is uniform. The results show that the viscous inner and outer pressure forming can provide a new approach for integral forming of thin-walled tubes with complex shapes.展开更多
This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize co...This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize computer program easily. Results can be applied in both autonomous and non-autonomous systems. At last, an example is resolved to verify the method.展开更多
Ore forming process of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan deposits in Langshan Zhaertai Mesoproterozoic SEDEX metallogenic belt is closely related to the syndepositional volcanic activities based ...Ore forming process of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan deposits in Langshan Zhaertai Mesoproterozoic SEDEX metallogenic belt is closely related to the syndepositional volcanic activities based on the following facts: (1) The Sm Nd isochron age of the basic volcanic rocks varies from 1 491 Ma to 1 824 Ma (more than or close to the model age of the lead isotope of all sulfide minerals) in these deposits, with ε (Nd, t ) =(3.48-6.40)±0.80, whose REE composition is enriched in LREE and depleted in HREE, indicating that these volcanic rocks were derived from the mantle or lower crust. (2) The REE composition of some Pb Zn Py ores is also enriched in LREE and depleted in HREE. The chondrite normalized REE patterns are similar to those of the basic volcanic rocks. (3) In the lead isotope composition diagram of Doe and Zartman, most of sphalerite, galena, pyrite, pyrrhotite and chalcopyrite are plotted on both sides of the line for the mantle or between the lines for the mantle and lower crust. (4) Cobalt content of some pyrites is much higher than their nickel content ( w (Co)/ w (Ni)= 11.91- 12.19). (5) Some volcanic blocks and debrises have been picked out from some pyrite and pyrrhotite ores. (6) All Zn Pb Cu Fe sulfide orebodies in these deposits occur in the strata overlying the metamorphic volcanic rocks in the only second ore bearing formation. The Jiashengpan deposit lacks in syndepositional volcanic rocks in the host succession, only Pb and Zn occur without Cu, but the Dongshengmiao, Tanyaokou and Huogeqi deposits with syndepositonal volcanic rocks in the host succession contain Cu, indicating the relatively high ore forming temperatures, besides Pb and Zn. The syndepositional volcanic eruption directly supplied some ore forming metals and resulted in the secular geothermal anomaly favorable for the circulation of the submarine convective hydrothermal system, and in the precipitation of deep mineralizing fluids exhaling into the anoxide basins along the syndepositional fault system in the Langshan Zhaertai rift.展开更多
A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room tempera...A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room temperature,and the principle of the method was provided.Experiments and FE simulations were carried out to analyze the deformation characteristics for the part with larger variable diameter ratio(35%).The results show that visco-elasto-plastic pressure-carrying medium can meet the requirements of the room-temperature deformation condition for nickel based super-alloy sheet.The inner and outer pressure forming with the visco-elasto-plastic pressure-carrying medium can meet the requirements of dimensional accuracy for the thin-walled part with variable diameter sections.The thinning of wall-thickness is less than 4%.This method provides a new approach for near-net shape forming of nickel based super-alloy thin-walled parts with variable diameter sections.展开更多
The cyclic symmetry and local fine-mesh technology were adopted in the establishment of numerical simulation model for inner gear spin-forming. And the processing experiment was proceeded to verify the reliability of ...The cyclic symmetry and local fine-mesh technology were adopted in the establishment of numerical simulation model for inner gear spin-forming. And the processing experiment was proceeded to verify the reliability of the established model. The simulation result indicates that besides radial and axial flows, there also exists rather large tangential flow, which results in an increase of forming force in tangential direction. Furthermore, the un-uniform deformation of metal during spin-forming would cause forming defects, such as underfill in tooth fillet region and indentation on the outside spun part.展开更多
Using a Diamond Anvil Cell combined with micro Raman spectroscopy, the quantitative relations among Raman shifts, pressure and temperature were obtained for the vibration of O-H in H2O-NaCl, C-O in CO3^2-, S-O in SO4^...Using a Diamond Anvil Cell combined with micro Raman spectroscopy, the quantitative relations among Raman shifts, pressure and temperature were obtained for the vibration of O-H in H2O-NaCl, C-O in CO3^2-, S-O in SO4^2- and C-H in n-heptane-cyclohexane. Based on the quantitative relationships obtained, it is possible to determine the inner pressure for single fluid inclusions and to further determine the isochore of the systems. It is not only helpful to obtain the forming temperatures and pressures of the enclosing minerals, but also to be able to provide information concerning the chemical compositions of the fluid inclusions.展开更多
基金Funded by the National Natural Science Foundation of China(No.51205260)
文摘Aiming at overcoming the difficulties in integral forming of thin-walled tubes with complex shapes, a novel forming method by inner and outer pressure through viscous was proposed. In this method, by dividing large deformation of the part into inner and outer pressure forming deformations, the limit deformation of tube part can be increased by several times. Meanwhile, the principle of viscous inner and outer pressure forming was provided, and key problems during the forming process such as reduction of the wall-thickness and instability wrinkling were analyzed. Thereby, the complex curved surface super-alloy GH3044 thin-walled tube with varying diameter ratio of 1.35（the ratio between the maximum and minimum diameters of the part） can be integrally formed by this method. The experimental surface of the formed part is superior in quality and the wall-thickness distribution is uniform. The results show that the viscous inner and outer pressure forming can provide a new approach for integral forming of thin-walled tubes with complex shapes.
文摘This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize computer program easily. Results can be applied in both autonomous and non-autonomous systems. At last, an example is resolved to verify the method.
基金This study is supported by the State"973"High-Tech Project( No. G19990 43 2 15 ) and the Key Project of the Former Ministry o
文摘Ore forming process of the Dongshengmiao, Huogeqi, Tanyaokou and Jiashengpan deposits in Langshan Zhaertai Mesoproterozoic SEDEX metallogenic belt is closely related to the syndepositional volcanic activities based on the following facts: (1) The Sm Nd isochron age of the basic volcanic rocks varies from 1 491 Ma to 1 824 Ma (more than or close to the model age of the lead isotope of all sulfide minerals) in these deposits, with ε (Nd, t ) =(3.48-6.40)±0.80, whose REE composition is enriched in LREE and depleted in HREE, indicating that these volcanic rocks were derived from the mantle or lower crust. (2) The REE composition of some Pb Zn Py ores is also enriched in LREE and depleted in HREE. The chondrite normalized REE patterns are similar to those of the basic volcanic rocks. (3) In the lead isotope composition diagram of Doe and Zartman, most of sphalerite, galena, pyrite, pyrrhotite and chalcopyrite are plotted on both sides of the line for the mantle or between the lines for the mantle and lower crust. (4) Cobalt content of some pyrites is much higher than their nickel content ( w (Co)/ w (Ni)= 11.91- 12.19). (5) Some volcanic blocks and debrises have been picked out from some pyrite and pyrrhotite ores. (6) All Zn Pb Cu Fe sulfide orebodies in these deposits occur in the strata overlying the metamorphic volcanic rocks in the only second ore bearing formation. The Jiashengpan deposit lacks in syndepositional volcanic rocks in the host succession, only Pb and Zn occur without Cu, but the Dongshengmiao, Tanyaokou and Huogeqi deposits with syndepositonal volcanic rocks in the host succession contain Cu, indicating the relatively high ore forming temperatures, besides Pb and Zn. The syndepositional volcanic eruption directly supplied some ore forming metals and resulted in the secular geothermal anomaly favorable for the circulation of the submarine convective hydrothermal system, and in the precipitation of deep mineralizing fluids exhaling into the anoxide basins along the syndepositional fault system in the Langshan Zhaertai rift.
文摘A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room temperature,and the principle of the method was provided.Experiments and FE simulations were carried out to analyze the deformation characteristics for the part with larger variable diameter ratio(35%).The results show that visco-elasto-plastic pressure-carrying medium can meet the requirements of the room-temperature deformation condition for nickel based super-alloy sheet.The inner and outer pressure forming with the visco-elasto-plastic pressure-carrying medium can meet the requirements of dimensional accuracy for the thin-walled part with variable diameter sections.The thinning of wall-thickness is less than 4%.This method provides a new approach for near-net shape forming of nickel based super-alloy thin-walled parts with variable diameter sections.
基金Support by National Natural Science Foundation of China (50475097)Provincial Natural Science Foundation of Guangdong (04105943)Industrial Science and Technology Development Program Foundation of Guangdong (600611901001)
文摘The cyclic symmetry and local fine-mesh technology were adopted in the establishment of numerical simulation model for inner gear spin-forming. And the processing experiment was proceeded to verify the reliability of the established model. The simulation result indicates that besides radial and axial flows, there also exists rather large tangential flow, which results in an increase of forming force in tangential direction. Furthermore, the un-uniform deformation of metal during spin-forming would cause forming defects, such as underfill in tooth fillet region and indentation on the outside spun part.
基金supported by Chinese Natural Science Foundation (No.40873047)
文摘Using a Diamond Anvil Cell combined with micro Raman spectroscopy, the quantitative relations among Raman shifts, pressure and temperature were obtained for the vibration of O-H in H2O-NaCl, C-O in CO3^2-, S-O in SO4^2- and C-H in n-heptane-cyclohexane. Based on the quantitative relationships obtained, it is possible to determine the inner pressure for single fluid inclusions and to further determine the isochore of the systems. It is not only helpful to obtain the forming temperatures and pressures of the enclosing minerals, but also to be able to provide information concerning the chemical compositions of the fluid inclusions.
