The circumferentially averaged equation of the inlet flow radial equilibrium in axial compressor was deduced. It indicates that the blade inlet radial pressure gradient is closely related to the radial component of th...The circumferentially averaged equation of the inlet flow radial equilibrium in axial compressor was deduced. It indicates that the blade inlet radial pressure gradient is closely related to the radial component of the circumferential fluctuation（CF） source item. Several simplified cascades with/without aerodynamic loading were numerically studied to investigate the effects of blade bowing on the inlet flow radial equilibrium. A data reduction program was conducted to obtain the CF source from three-dimensional（3D） simulation results. Flow parameters at the passage inlet were focused on and each term in the radial equilibrium equation was discussed quantitatively. Results indicate that the inviscid blade force is the inducement of the inlet CF due to geometrical asymmetry. Blade bowing induces variation of the inlet CF, thus changes the radial pressure gradient and leads to flow migration before leading edge（LE） in the cascades. Positive bowing drives the inlet flow to migrate from end walls to mid-span and negative bowing turns it to the reverse direction to build a new equilibrium. In addition, comparative studies indicate that the inlet Mach number and blade loading can efficiently impact the effectiveness of blade bowing on radial equilibrium in compressor design.展开更多
In this paper, an experimental study is conducted on cascade boundary layer under different inlet conditions. New method is used to measure the total pressure in blade surface boundary layer directly using total press...In this paper, an experimental study is conducted on cascade boundary layer under different inlet conditions. New method is used to measure the total pressure in blade surface boundary layer directly using total pressure probe. Total pressure in both suction and pressure surfaces are acquired at different inlet conditions by changing incidence angle and inlet Mach number. In addition, a series of parameters related to boundary layer characteristics are calculated. The objective of the experiment is to investigate the influence of inlet flow conditions on them. The results indicate that influence of incidence angle is significant when other conditions are the same. Displacement thickness, momentum thickness as well as other parameters display some disciplines for variation. In contrast, inlet Mach number has only a small influence in that boundary layer becomes a litter thinner with increasing Mach number. Comparisons of experimental results with theoretical expectations demonstrate that the method in this experiment is effective and reliable.展开更多
A hybrid CFD/characteristic method(CCM) was proposed for fast design and evaluation of hypersonic inlet flow with nose bluntness, which targets the combined advantages of CFD and method of characteristics. Both the ac...A hybrid CFD/characteristic method(CCM) was proposed for fast design and evaluation of hypersonic inlet flow with nose bluntness, which targets the combined advantages of CFD and method of characteristics. Both the accuracy and efficiency of the developed CCM were verified reliably, and it was well demonstrated for the external surfaces design of a hypersonic forebody/inlet with nose bluntness. With the help of CCM method, effects of nose bluntness on forebody shock shapes and the flowfield qualities which dominate inlet performance were examined and analyzed on the two-dimensional and axisymmetric configurations. The results showed that blunt effects of a wedge forebody are more substantial than that of related cone cases. For a conical forebody with a properly blunted nose, a recovery of the shock front back to that of corresponding sharp nose is exhibited, accompanied with a gradually fading out of entropy layer effects. Consequently a simplification is thought to be reasonable for an axisymmetric inlet with a proper compression angle, and a blunt nose of limited radius can be idealized as a sharp nose, as the spillage and flow variations at the entrance are negligible, even though the nose scale increases to 10% cowl lip radius. Whereas for two-dimensional inlets, the blunt effects are substantial since not only the inlet capturing/starting capabilities, but also the flow uniformities are obviously degraded.展开更多
A methodology has been developed to generate a non-uniform/distoited inlet flow field to test a gas turbine engine in ground test facilities.The distorted flow field is generated by positioning radial and circumferent...A methodology has been developed to generate a non-uniform/distoited inlet flow field to test a gas turbine engine in ground test facilities.The distorted flow field is generated by positioning radial and circumferential strips of varying widths upstream of the Aerodynamic Interface Plane.The interacting wakes from these strips are used to generate a given target flow field.The approximate superposition of these wakes is investigated and used to construct the strip arrangement which is subsequently validated by computing the flow field by solving the Navier-Stokes equations.The strip geometry designed using the present methodology is able to produce the target Mach number distribution with a root-mean-square error of 5.06%.展开更多
A numerical method based on the doublet distribution for calculating the effects of inlet flow on hydrodynamic characteristics of a hydrofoil-strut-pod configuration under the linearized free water surface condition i...A numerical method based on the doublet distribution for calculating the effects of inlet flow on hydrodynamic characteristics of a hydrofoil-strut-pod configuration under the linearized free water surface condition is presented in this paper. Inlet flow condition is represented by a control section 5, in the inlet tube on which the axial velocity is u-niform and determined by a given flowrate. The numerical results for some typical cases are compared with corresponding experimental data. It is found that good agreement between computational and experimental results can be achieved. This numerical method may be applied to the prediction of foilborne performance characteristics of a waterjet propelled hydrofoil craft and to optimization of integrated hydrofoil waterjet propulsion sys-展开更多
In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pr...In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribution measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators （VGs） is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate： （1） Compared with the baseline serpentine design without flow control, the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion （-↑△σ0） decreases from 11.7% to 2.3% by using the VGs. （2） With the descent of the free stream Mach number the total pressure loss decreases. However, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. （3） When Mao = 0.6-0.8, a = -4°-8° and β = 0°-6°, the total pressure recovery varies between 0.936 and 0. 961, the circular total pressure distortion coefficient varies between 1.4 % and 5.4 % and the synthesis distortion coefficient has a ranges from 3.8 % to 7.0 %. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.展开更多
Inlet recirculation is proved as an effective way for centrifugal compressor surge margin extension,and is successively used in some engineering applications.Unfortunately its working mechanism is still not being well...Inlet recirculation is proved as an effective way for centrifugal compressor surge margin extension,and is successively used in some engineering applications.Unfortunately its working mechanism is still not being well understood,which leads to redesigning of inlet recirculation mostly by experience.Also,most study about inlet recirculation is steady to date.It is necessary to study surge margin extension mechanism about inlet recirculation.To expose the mechanism in detail,steady and unsteady numerical simulations were performed on a centrifugal compressor with and without inlet recirculation.The results showed that,with inlet recirculation,the inlet axial velocity is augmented,relative Mach number around blade tip leading edge area is significantly reduced and so is the flow angle.As the flow angle decreased,the incidence angle reduced which greatly improves the flow field inside the impeller.Moreover,inlet recirculation changes the blade loading around blade tip and restrains the flow separation on the blade suction side at the leading edge area.The unsteady results of static pressure around blade surface,entropy at inlet crossflow section and vorticity distributions at near tip span surface indicated that,at near stall condition,strong fluctuation exists in the vicinity of tip area due to the interaction between tip leakage flow and core flow.By inlet recirculation these strong flow fluctuations are eliminated so the flow stability is greatly enhanced.All these improvements mentioned above are the reason for inlet recirculation delays compressor stall.This research reveals the surge margin extension reason of inlet recirculation from an unsteady flow viewpoint and provides important reference for inlet recirculation structure design.展开更多
Experimental investigations are conducted on an axisymmetric hypersonic inlet to evaluate the effects of trips on oscillatory flows. The model exit is throttled with a fixed block to generate oscillatory flows at a fr...Experimental investigations are conducted on an axisymmetric hypersonic inlet to evaluate the effects of trips on oscillatory flows. The model exit is throttled with a fixed block to generate oscillatory flows at a freestream Mach number of 6 in a conventional wind tunnel and a shock tunnel. Schlieren imaging and pressure measurements are adopted to record unsteady flow features.Results indicate that trips with a 1 mm thickness prominently suppress external separations, shorten oscillatory cycles, and modify pressure magnitudes. Trips can reduce the upstream movement ranges of separated shocks from nose regions to locations axially 142 mm downstream. The oscillatory cycles are shortened from 3.75 ms to 3.25 ms and from 4 ms to 3.13 ms in two facilities.Tripped cases generally exhibit higher pressure magnitudes than those of untripped cases, of which the increment is up to 21 times the freestream static pressure for the farthest downstream transducer in the shock tunnel. The effects of trips are related to the streamwise vortexes in wake flows, in which interactions between external separations modify the separated flow patterns and enhance the sustainment of the forebody boundary layers to backpressure. Flow processes causing increments of oscillatory frequencies and pressure magnitudes are analyzed, while the flow mechanisms dominating the processes still need to be clarified in the future.展开更多
In the process of performance prediction of waterjet system,the flow loss of inlet duct is usually reckoned by the rule of thumb. But its value is often overestimated to some extent,resulting in error of prediction ac...In the process of performance prediction of waterjet system,the flow loss of inlet duct is usually reckoned by the rule of thumb. But its value is often overestimated to some extent,resulting in error of prediction accuracy. This paper introduces a new method to determine the flow loss by means of computational fluid dynamic (CFD). Firstly,the fluid field around waterjet system is simulated by solving the Reynolds Averaged Navier-Stokes (RANS) equations using commercial CFD code Fluent. Then an additional User-Defined Scalar (UDS) equation is embedded into Fluent to get the virtual dividing surface between the internal flow ingested into the inlet duct and the external flow beneath the hull,which is named as streamtube. By virtual of the streamtube the flow loss can be calculated according to the difference of total pressure between the duct outlet and the capture area ahead of the intake. The results from CFD calculation show that the flow loss coeflcient of a typical flush-type inlet duct is varying from 0.05 to 0.12 at different operation conditions,being obviously less than the value of 0.2-0.3 from empirical rules. With the results of this paper the prediction accuracy on propulsive performance of the waterjet system can be improved further.展开更多
Estuarine processes in the arctic lagoons are among the least studied but important subjects, especially considering the rapid warming of arctic water which may change the length of ice-free period in the summer. In t...Estuarine processes in the arctic lagoons are among the least studied but important subjects, especially considering the rapid warming of arctic water which may change the length of ice-free period in the summer. In this paper, wind-driven exchange flows in the micro-tidal Elson Lagoon of northern Alaska with multiple inlets of contrasting widths and depths are studied with in situ observations, statistical analysis, numerical experiments, a regression model on the basis of dynamics, and remote sensing data. Water velocity profiles were obtained from a bottom deployed acoustic Doppler current profiler(ADCP) in the northwestern Eluitkak Pass connecting the Beaufort Sea to the Elson Lagoon during a 4.9 day ice-free period in the summer of 2013. The subtidal flow is found correlated with wind(R^2 value ～96%). Frequently occurring east, northeast and north winds from the arctic atmospheric high-and low-pressure systems push water from the Beaufort Sea into the lagoon through the wide inlets on the eastern side of the lagoon, resulting in an outward flow against the wind at the narrow northwestern inlet. The counter-wind flow is a result of an uneven wind forcing acting through the asymmetric inlets and depth,an effect of "torque" or vorticity. Under northwest wind, the exchange flow at the northwestern inlet reverses its direction, with inward flows through the upwind northwestern inlet and outward flows through the downwind eastern inlets. A regression model is established based on the momentum equations and Taylor series expansions. The model is used to predict flows in July and August of 2015 and July of 2017, supported by available Landsat satellite images. About 73%–80% of the time the flows at Eluitkak Pass are out of Elson Lagoon for the summer of 2015 and 2017. Numerical experiments are conducted to corroborate the findings and illustrate the effects under various wind conditions. A quasi-steady state balance between wind force and surface pressure gradient is confirmed.展开更多
As one of the core components of turbocharger or micro-turbine, radial turbine has the features of small size and high rotation speed. In order to explore the design method and flow mechanism of the turbine with a vol...As one of the core components of turbocharger or micro-turbine, radial turbine has the features of small size and high rotation speed. In order to explore the design method and flow mechanism of the turbine with a volute, a centimeter-scale radial turbine with a vaneless air-inlet volute was designed and simulated numerically to investigate the characteristics of the coupled flow field. The results show that the wheel efficiency of single passage computation without the volute is 80.1%. After accounting for the factors of the loss caused by the volute and the interaction between each passage, the performance is more accurate according to the whole flow passage computation with the volute. High load region gathers at the mid-span and the efficiency declines to 76.6%. The performance of the volute whose structure angle of the trapezoid section is equal to 70 degree is better. Unlike uniform inlet condition in single passage, more appropriate inlet flow for the impeller is provided by the rectification effect of the volute in full passage calculation. Flow parameters are distributed more evenly along the blade span and are generally consistent between each passage at the outlet of the turbine.展开更多
On the base of an assumed steady inlet circumferential total pressure distortion, three-dimensional time-dependent numerical simulations are conducted on an axial flow subsonic compressor rotor. The performances and f...On the base of an assumed steady inlet circumferential total pressure distortion, three-dimensional time-dependent numerical simulations are conducted on an axial flow subsonic compressor rotor. The performances and flow fields of a compressor rotor, either casing treated or untreated, are investigated in detail either with or without inlet pressure distortion. Results show that the circumferential groove casing treatment can expand the operating range of the compressor rotor either with or without inlet pressure distortion at the expense of a drop in peak isentropic efficiency. The casing treatment is capable of weakening or even removing the tip leakage vortex effectively either with or without inlet distortion. In clean inlet circumstances, the enhancement and forward movement of tip leakage vortex cause the untreated compressor rotor to stall. By contrast, with circumferential groove casing, the serious flow separation on the suction surface leads to aerodynamic stalling eventually. In the presence of inlet pressure distortion, the blade loading changes from passage to passage as the distorted inflow sector is traversed. Similar to the clean inlet circumstances, with a smooth wall casing, the enhancement and forward movement of tip leakage vortex are still the main factors which lead to the compressor rotor stalling eventually. When the rotor works trader near stall conditions, the blockage resulting from the tip leakage vortex in all the passages is very serious. Especially in several passages, flow-spillage is observed. Compared to the clean inlet circumstances, circumferential groove casing treatment can also eliminate the low energy zone in the outer end wall region effectively.展开更多
The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dim...The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dimensional （3D） turbulence flow in conduits is an important method to study the hydraulic performance and conduct an optimum hydraulic design for the conduits. With the analyses of the flow patterns in the inlet and outlet conduits, the boundary conditions of the numerical simulation for them can be determined. The main obtained conclusions are as follows： （i） Under normal operation conditions, there is essentially no pre-swirl flow at the impeller chamber inlet of an axial-flow pump system, based on which the boundary condition at the inlet conduit may be defined. （ii） The circulation at the guide vane outlet of an axial-flow pump system has a great effect on the hydraulic performance of the outlet conduit, and there is optimum circulation for the performance. Therefore, it is strongly suggested to design the guide vane according to the optimum circulation. （iii） The residual circulation at the guide vane outlet needs to be considered for the inlet boundary condition of the outlet conduit, and the value of the circulation may be measured in a specially designed test model.展开更多
Elbow-inlet passage is widely used in large drainage pumping stations.Flow uniformity at the exit section directly determines its hydraulic performance.Flow uniformity must be optimized to improve the operational effi...Elbow-inlet passage is widely used in large drainage pumping stations.Flow uniformity at the exit section directly determines its hydraulic performance.Flow uniformity must be optimized to improve the operational efficiency of the large axial-flow pumping station.Modeling and numerical simulation methods were used to investigate the elbow-inlet passage,and the accuracy of the calculation results was verified.The key geometric parameters affecting the uniformity of the flow were optimized by the orthogonal experiment design.The optimal schemes were obtained and compared with the original scheme.The results show that flow uniformity V u after optimization is 95.41%,which is increased by 1.04%.The pumping station efficiency is increased by 1.89%,thereby confirming the applicability and accuracy of the proposed scheme,especially for the optimization of flow uniformity of the exit section of the elbow-inlet passage.展开更多
The laminar analytic solutions of velocities and pressure in the central zone of the inlet region of pipe flow are given under the condition of uniform inflow, based on the Navier-Stokes equations of incompressible vi...The laminar analytic solutions of velocities and pressure in the central zone of the inlet region of pipe flow are given under the condition of uniform inflow, based on the Navier-Stokes equations of incompressible viscous flow.展开更多
Microjets are used to control the internal flow to improve the performance of an ultra-compact serpentine inlet. A highly offset serpentine inlet with length-to-diameter ratio of 2.5 is designed and static tests are c...Microjets are used to control the internal flow to improve the performance of an ultra-compact serpentine inlet. A highly offset serpentine inlet with length-to-diameter ratio of 2.5 is designed and static tests are conducted to analyze the internal flow characteristics in terms of pressure recovery, distortion and flow separation. Flow separation is encountered in the second S-turn, and two strong counter-rotating vortices are formed at the aerodynamic interthce plane （AIP） face which occupy a quarter of the outlet area and result in severe pressure loss and distortion. A flow control model employing a row of microjets in the second turn is designed based on the internal flow characteristics and simplified CFD simulations. Flow control tests are conducted to verify the control effectiveness and understand the characteristics as a function of inlet throat Mach number, injection mass flow ratio, jet Mach number and momentum coefficient. At all test Mach numbers, microjet flow control （MFC） effectively improves the recovery and reduces the distortion intensity. Between inlet throat Mach number 0.2 and 0.5, the strong flow separation in the second S-turn is suppressed at an optimum jet flow ratio of less than 0.65%, resulting in a maximum improvement of 4% for pressure recovery coefficient and a maximum decrease of 75% for circumferential distortion intensity at cruise. However, in order to suppress the flow separation, the injection rate should retain in an effective range. When the injection rate is higher than this range, the flow is degraded and the distortion contour is changed from 90° circumferential distortion pattern to 180° circumferential distortion pattern. Detailed data analysis shows that this optimum flow ratio depends on inlet throat Mach number and the monlcntunl coefficient affects the control effectiveness in a dual stepping manner.展开更多
The structural and aerodynamic performance of the air inlet volute has an important influence on the performance of the gas turbine. On one hand, it requires the airflow flowing through inlet volute as even as possibl...The structural and aerodynamic performance of the air inlet volute has an important influence on the performance of the gas turbine. On one hand, it requires the airflow flowing through inlet volute as even as possible, in order to reduce the pressure loss, to avoid a decrease in the effective output power and an increase of the fuel consumption rate of the internal combustion engine which indicate the inefficiency of the entire power unit;On the other hand, it requires the size of the inlet volute to be as small as possible in order to save mounting space and production costs. The thesis builds the structure model and develops flow fields numerical simulation of several different sizes of the inlet volutes. Further, the unreasonable aerodynamic structure is improved according to the flow field characteristics and thereby, a better aerodynamic performance of the inlet volute is obtained.展开更多
By means of the analysis of the internal flow within inlet passage of large pumping sta-tion, an analysis of 3-D direct boundary element for the flow has been presented on the potentialflow assumption, and a calculati...By means of the analysis of the internal flow within inlet passage of large pumping sta-tion, an analysis of 3-D direct boundary element for the flow has been presented on the potentialflow assumption, and a calculation and an experimental proof for the inlet passage of 30 angle-type axial pumping station have been made. Based on the analysis of the calculations and theexperiments, the calculation method is feasible and believable.展开更多
The impulse and self starting characteristics of a mixed-compression hypersonic inlet designed at Mach number of 6.5 are studied by applying the unsteady computational fluid dynamics （CFD） method. The full Navier–S...The impulse and self starting characteristics of a mixed-compression hypersonic inlet designed at Mach number of 6.5 are studied by applying the unsteady computational fluid dynamics （CFD） method. The full Navier–Stokes equations are solved with the assumption of viscous perfect gas model, and the shear-stress transport （SST） k–x two-equation Reynolds averaged Navier– Stokes （RANS） model is used for turbulence modeling. Results indicate that during impulse starting, the flow field is divided into three zones with different aerodynamic parameters by primary shock and upstream-facing shock. The separation bubble on the shoulder of ramp undergoes a generating, growing, swallowing and disappearing process in sequence. But a separation bubble at the entrance of inlet exists until the freestream velocity is accelerated to the starting Mach number during self starting. The mass flux distribution of flow field is non-uniform because of the interaction between shock and boundary layer, so that the mass flow rate at throat is unsteady during impulse starting. The duration of impulse starting process increases almost linearly with the decrease of freestream Mach number but rises abruptly when the freestream Mach number approaches the starting Mach number. The accelerating performance of booster almost has no influence on the self starting ability of hypersonic inlet.展开更多
基金supported by the National Natural Science Foundation of China (Nos.51236001,51006005)the National Basic Research Program of China (No. 2012CB720201)Beijing Natural Science Foundation (No. 3151002)
文摘The circumferentially averaged equation of the inlet flow radial equilibrium in axial compressor was deduced. It indicates that the blade inlet radial pressure gradient is closely related to the radial component of the circumferential fluctuation（CF） source item. Several simplified cascades with/without aerodynamic loading were numerically studied to investigate the effects of blade bowing on the inlet flow radial equilibrium. A data reduction program was conducted to obtain the CF source from three-dimensional（3D） simulation results. Flow parameters at the passage inlet were focused on and each term in the radial equilibrium equation was discussed quantitatively. Results indicate that the inviscid blade force is the inducement of the inlet CF due to geometrical asymmetry. Blade bowing induces variation of the inlet CF, thus changes the radial pressure gradient and leads to flow migration before leading edge（LE） in the cascades. Positive bowing drives the inlet flow to migrate from end walls to mid-span and negative bowing turns it to the reverse direction to build a new equilibrium. In addition, comparative studies indicate that the inlet Mach number and blade loading can efficiently impact the effectiveness of blade bowing on radial equilibrium in compressor design.
文摘In this paper, an experimental study is conducted on cascade boundary layer under different inlet conditions. New method is used to measure the total pressure in blade surface boundary layer directly using total pressure probe. Total pressure in both suction and pressure surfaces are acquired at different inlet conditions by changing incidence angle and inlet Mach number. In addition, a series of parameters related to boundary layer characteristics are calculated. The objective of the experiment is to investigate the influence of inlet flow conditions on them. The results indicate that influence of incidence angle is significant when other conditions are the same. Displacement thickness, momentum thickness as well as other parameters display some disciplines for variation. In contrast, inlet Mach number has only a small influence in that boundary layer becomes a litter thinner with increasing Mach number. Comparisons of experimental results with theoretical expectations demonstrate that the method in this experiment is effective and reliable.
基金supported by the National Natural Science Foundation of China(Grant Nos.11132010 and 11402263)
文摘A hybrid CFD/characteristic method(CCM) was proposed for fast design and evaluation of hypersonic inlet flow with nose bluntness, which targets the combined advantages of CFD and method of characteristics. Both the accuracy and efficiency of the developed CCM were verified reliably, and it was well demonstrated for the external surfaces design of a hypersonic forebody/inlet with nose bluntness. With the help of CCM method, effects of nose bluntness on forebody shock shapes and the flowfield qualities which dominate inlet performance were examined and analyzed on the two-dimensional and axisymmetric configurations. The results showed that blunt effects of a wedge forebody are more substantial than that of related cone cases. For a conical forebody with a properly blunted nose, a recovery of the shock front back to that of corresponding sharp nose is exhibited, accompanied with a gradually fading out of entropy layer effects. Consequently a simplification is thought to be reasonable for an axisymmetric inlet with a proper compression angle, and a blunt nose of limited radius can be idealized as a sharp nose, as the spillage and flow variations at the entrance are negligible, even though the nose scale increases to 10% cowl lip radius. Whereas for two-dimensional inlets, the blunt effects are substantial since not only the inlet capturing/starting capabilities, but also the flow uniformities are obviously degraded.
文摘A methodology has been developed to generate a non-uniform/distoited inlet flow field to test a gas turbine engine in ground test facilities.The distorted flow field is generated by positioning radial and circumferential strips of varying widths upstream of the Aerodynamic Interface Plane.The interacting wakes from these strips are used to generate a given target flow field.The approximate superposition of these wakes is investigated and used to construct the strip arrangement which is subsequently validated by computing the flow field by solving the Navier-Stokes equations.The strip geometry designed using the present methodology is able to produce the target Mach number distribution with a root-mean-square error of 5.06%.
文摘A numerical method based on the doublet distribution for calculating the effects of inlet flow on hydrodynamic characteristics of a hydrofoil-strut-pod configuration under the linearized free water surface condition is presented in this paper. Inlet flow condition is represented by a control section 5, in the inlet tube on which the axial velocity is u-niform and determined by a given flowrate. The numerical results for some typical cases are compared with corresponding experimental data. It is found that good agreement between computational and experimental results can be achieved. This numerical method may be applied to the prediction of foilborne performance characteristics of a waterjet propelled hydrofoil craft and to optimization of integrated hydrofoil waterjet propulsion sys-
文摘In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribution measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators （VGs） is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate： （1） Compared with the baseline serpentine design without flow control, the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion （-↑△σ0） decreases from 11.7% to 2.3% by using the VGs. （2） With the descent of the free stream Mach number the total pressure loss decreases. However, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. （3） When Mao = 0.6-0.8, a = -4°-8° and β = 0°-6°, the total pressure recovery varies between 0.936 and 0. 961, the circular total pressure distortion coefficient varies between 1.4 % and 5.4 % and the synthesis distortion coefficient has a ranges from 3.8 % to 7.0 %. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.
文摘Inlet recirculation is proved as an effective way for centrifugal compressor surge margin extension,and is successively used in some engineering applications.Unfortunately its working mechanism is still not being well understood,which leads to redesigning of inlet recirculation mostly by experience.Also,most study about inlet recirculation is steady to date.It is necessary to study surge margin extension mechanism about inlet recirculation.To expose the mechanism in detail,steady and unsteady numerical simulations were performed on a centrifugal compressor with and without inlet recirculation.The results showed that,with inlet recirculation,the inlet axial velocity is augmented,relative Mach number around blade tip leading edge area is significantly reduced and so is the flow angle.As the flow angle decreased,the incidence angle reduced which greatly improves the flow field inside the impeller.Moreover,inlet recirculation changes the blade loading around blade tip and restrains the flow separation on the blade suction side at the leading edge area.The unsteady results of static pressure around blade surface,entropy at inlet crossflow section and vorticity distributions at near tip span surface indicated that,at near stall condition,strong fluctuation exists in the vicinity of tip area due to the interaction between tip leakage flow and core flow.By inlet recirculation these strong flow fluctuations are eliminated so the flow stability is greatly enhanced.All these improvements mentioned above are the reason for inlet recirculation delays compressor stall.This research reveals the surge margin extension reason of inlet recirculation from an unsteady flow viewpoint and provides important reference for inlet recirculation structure design.
基金co-supported by the China Postdoctoral Science Foundation (No. 2017M612059)the Fundamental Research Funds for the Central Universities of China (JZ2015HGBZ0471)the National Natural Science Foundation of China (Nos. 11402263 and 11132010)
文摘Experimental investigations are conducted on an axisymmetric hypersonic inlet to evaluate the effects of trips on oscillatory flows. The model exit is throttled with a fixed block to generate oscillatory flows at a freestream Mach number of 6 in a conventional wind tunnel and a shock tunnel. Schlieren imaging and pressure measurements are adopted to record unsteady flow features.Results indicate that trips with a 1 mm thickness prominently suppress external separations, shorten oscillatory cycles, and modify pressure magnitudes. Trips can reduce the upstream movement ranges of separated shocks from nose regions to locations axially 142 mm downstream. The oscillatory cycles are shortened from 3.75 ms to 3.25 ms and from 4 ms to 3.13 ms in two facilities.Tripped cases generally exhibit higher pressure magnitudes than those of untripped cases, of which the increment is up to 21 times the freestream static pressure for the farthest downstream transducer in the shock tunnel. The effects of trips are related to the streamwise vortexes in wake flows, in which interactions between external separations modify the separated flow patterns and enhance the sustainment of the forebody boundary layers to backpressure. Flow processes causing increments of oscillatory frequencies and pressure magnitudes are analyzed, while the flow mechanisms dominating the processes still need to be clarified in the future.
文摘In the process of performance prediction of waterjet system,the flow loss of inlet duct is usually reckoned by the rule of thumb. But its value is often overestimated to some extent,resulting in error of prediction accuracy. This paper introduces a new method to determine the flow loss by means of computational fluid dynamic (CFD). Firstly,the fluid field around waterjet system is simulated by solving the Reynolds Averaged Navier-Stokes (RANS) equations using commercial CFD code Fluent. Then an additional User-Defined Scalar (UDS) equation is embedded into Fluent to get the virtual dividing surface between the internal flow ingested into the inlet duct and the external flow beneath the hull,which is named as streamtube. By virtual of the streamtube the flow loss can be calculated according to the difference of total pressure between the duct outlet and the capture area ahead of the intake. The results from CFD calculation show that the flow loss coeflcient of a typical flush-type inlet duct is varying from 0.05 to 0.12 at different operation conditions,being obviously less than the value of 0.2-0.3 from empirical rules. With the results of this paper the prediction accuracy on propulsive performance of the waterjet system can be improved further.
基金The National Key R&D Project of China under contract No.2017YFC1404201the USA North Pacific Research Board Project under contract No.1229the USA Bureau of Ocean Energy Management Awards under contract Nos M12PG00024(ACES)and M12PG00018(Arctic EIS)
文摘Estuarine processes in the arctic lagoons are among the least studied but important subjects, especially considering the rapid warming of arctic water which may change the length of ice-free period in the summer. In this paper, wind-driven exchange flows in the micro-tidal Elson Lagoon of northern Alaska with multiple inlets of contrasting widths and depths are studied with in situ observations, statistical analysis, numerical experiments, a regression model on the basis of dynamics, and remote sensing data. Water velocity profiles were obtained from a bottom deployed acoustic Doppler current profiler(ADCP) in the northwestern Eluitkak Pass connecting the Beaufort Sea to the Elson Lagoon during a 4.9 day ice-free period in the summer of 2013. The subtidal flow is found correlated with wind(R^2 value ～96%). Frequently occurring east, northeast and north winds from the arctic atmospheric high-and low-pressure systems push water from the Beaufort Sea into the lagoon through the wide inlets on the eastern side of the lagoon, resulting in an outward flow against the wind at the narrow northwestern inlet. The counter-wind flow is a result of an uneven wind forcing acting through the asymmetric inlets and depth,an effect of "torque" or vorticity. Under northwest wind, the exchange flow at the northwestern inlet reverses its direction, with inward flows through the upwind northwestern inlet and outward flows through the downwind eastern inlets. A regression model is established based on the momentum equations and Taylor series expansions. The model is used to predict flows in July and August of 2015 and July of 2017, supported by available Landsat satellite images. About 73%–80% of the time the flows at Eluitkak Pass are out of Elson Lagoon for the summer of 2015 and 2017. Numerical experiments are conducted to corroborate the findings and illustrate the effects under various wind conditions. A quasi-steady state balance between wind force and surface pressure gradient is confirmed.
基金Supported by the Innovative Research Groups of the National Natural Science Foundation of China(No.51121004)the National Natural Science Foundation of China(No.50976026)
文摘As one of the core components of turbocharger or micro-turbine, radial turbine has the features of small size and high rotation speed. In order to explore the design method and flow mechanism of the turbine with a volute, a centimeter-scale radial turbine with a vaneless air-inlet volute was designed and simulated numerically to investigate the characteristics of the coupled flow field. The results show that the wheel efficiency of single passage computation without the volute is 80.1%. After accounting for the factors of the loss caused by the volute and the interaction between each passage, the performance is more accurate according to the whole flow passage computation with the volute. High load region gathers at the mid-span and the efficiency declines to 76.6%. The performance of the volute whose structure angle of the trapezoid section is equal to 70 degree is better. Unlike uniform inlet condition in single passage, more appropriate inlet flow for the impeller is provided by the rectification effect of the volute in full passage calculation. Flow parameters are distributed more evenly along the blade span and are generally consistent between each passage at the outlet of the turbine.
基金National Natural Science Foundation of China (10377013)
文摘On the base of an assumed steady inlet circumferential total pressure distortion, three-dimensional time-dependent numerical simulations are conducted on an axial flow subsonic compressor rotor. The performances and flow fields of a compressor rotor, either casing treated or untreated, are investigated in detail either with or without inlet pressure distortion. Results show that the circumferential groove casing treatment can expand the operating range of the compressor rotor either with or without inlet pressure distortion at the expense of a drop in peak isentropic efficiency. The casing treatment is capable of weakening or even removing the tip leakage vortex effectively either with or without inlet distortion. In clean inlet circumstances, the enhancement and forward movement of tip leakage vortex cause the untreated compressor rotor to stall. By contrast, with circumferential groove casing, the serious flow separation on the suction surface leads to aerodynamic stalling eventually. In the presence of inlet pressure distortion, the blade loading changes from passage to passage as the distorted inflow sector is traversed. Similar to the clean inlet circumstances, with a smooth wall casing, the enhancement and forward movement of tip leakage vortex are still the main factors which lead to the compressor rotor stalling eventually. When the rotor works trader near stall conditions, the blockage resulting from the tip leakage vortex in all the passages is very serious. Especially in several passages, flow-spillage is observed. Compared to the clean inlet circumstances, circumferential groove casing treatment can also eliminate the low energy zone in the outer end wall region effectively.
基金Project supported by the Natural Science Foundation of Jiangsu Higher Education Institutions ofChina(No.12KJD570001)
文摘The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dimensional （3D） turbulence flow in conduits is an important method to study the hydraulic performance and conduct an optimum hydraulic design for the conduits. With the analyses of the flow patterns in the inlet and outlet conduits, the boundary conditions of the numerical simulation for them can be determined. The main obtained conclusions are as follows： （i） Under normal operation conditions, there is essentially no pre-swirl flow at the impeller chamber inlet of an axial-flow pump system, based on which the boundary condition at the inlet conduit may be defined. （ii） The circulation at the guide vane outlet of an axial-flow pump system has a great effect on the hydraulic performance of the outlet conduit, and there is optimum circulation for the performance. Therefore, it is strongly suggested to design the guide vane according to the optimum circulation. （iii） The residual circulation at the guide vane outlet needs to be considered for the inlet boundary condition of the outlet conduit, and the value of the circulation may be measured in a specially designed test model.
基金Natural Science Foundation of China(51806053)Anhui Provincial Key Research and Development Program(1804a09020012,1804a09020007)
文摘Elbow-inlet passage is widely used in large drainage pumping stations.Flow uniformity at the exit section directly determines its hydraulic performance.Flow uniformity must be optimized to improve the operational efficiency of the large axial-flow pumping station.Modeling and numerical simulation methods were used to investigate the elbow-inlet passage,and the accuracy of the calculation results was verified.The key geometric parameters affecting the uniformity of the flow were optimized by the orthogonal experiment design.The optimal schemes were obtained and compared with the original scheme.The results show that flow uniformity V u after optimization is 95.41%,which is increased by 1.04%.The pumping station efficiency is increased by 1.89%,thereby confirming the applicability and accuracy of the proposed scheme,especially for the optimization of flow uniformity of the exit section of the elbow-inlet passage.
文摘The laminar analytic solutions of velocities and pressure in the central zone of the inlet region of pipe flow are given under the condition of uniform inflow, based on the Navier-Stokes equations of incompressible viscous flow.
基金co-supported by the Postdoctoral Foundation of China (Nos. 2013M542525, 2014T71019)
文摘Microjets are used to control the internal flow to improve the performance of an ultra-compact serpentine inlet. A highly offset serpentine inlet with length-to-diameter ratio of 2.5 is designed and static tests are conducted to analyze the internal flow characteristics in terms of pressure recovery, distortion and flow separation. Flow separation is encountered in the second S-turn, and two strong counter-rotating vortices are formed at the aerodynamic interthce plane （AIP） face which occupy a quarter of the outlet area and result in severe pressure loss and distortion. A flow control model employing a row of microjets in the second turn is designed based on the internal flow characteristics and simplified CFD simulations. Flow control tests are conducted to verify the control effectiveness and understand the characteristics as a function of inlet throat Mach number, injection mass flow ratio, jet Mach number and momentum coefficient. At all test Mach numbers, microjet flow control （MFC） effectively improves the recovery and reduces the distortion intensity. Between inlet throat Mach number 0.2 and 0.5, the strong flow separation in the second S-turn is suppressed at an optimum jet flow ratio of less than 0.65%, resulting in a maximum improvement of 4% for pressure recovery coefficient and a maximum decrease of 75% for circumferential distortion intensity at cruise. However, in order to suppress the flow separation, the injection rate should retain in an effective range. When the injection rate is higher than this range, the flow is degraded and the distortion contour is changed from 90° circumferential distortion pattern to 180° circumferential distortion pattern. Detailed data analysis shows that this optimum flow ratio depends on inlet throat Mach number and the monlcntunl coefficient affects the control effectiveness in a dual stepping manner.
文摘The structural and aerodynamic performance of the air inlet volute has an important influence on the performance of the gas turbine. On one hand, it requires the airflow flowing through inlet volute as even as possible, in order to reduce the pressure loss, to avoid a decrease in the effective output power and an increase of the fuel consumption rate of the internal combustion engine which indicate the inefficiency of the entire power unit;On the other hand, it requires the size of the inlet volute to be as small as possible in order to save mounting space and production costs. The thesis builds the structure model and develops flow fields numerical simulation of several different sizes of the inlet volutes. Further, the unreasonable aerodynamic structure is improved according to the flow field characteristics and thereby, a better aerodynamic performance of the inlet volute is obtained.
文摘By means of the analysis of the internal flow within inlet passage of large pumping sta-tion, an analysis of 3-D direct boundary element for the flow has been presented on the potentialflow assumption, and a calculation and an experimental proof for the inlet passage of 30 angle-type axial pumping station have been made. Based on the analysis of the calculations and theexperiments, the calculation method is feasible and believable.
文摘The impulse and self starting characteristics of a mixed-compression hypersonic inlet designed at Mach number of 6.5 are studied by applying the unsteady computational fluid dynamics （CFD） method. The full Navier–Stokes equations are solved with the assumption of viscous perfect gas model, and the shear-stress transport （SST） k–x two-equation Reynolds averaged Navier– Stokes （RANS） model is used for turbulence modeling. Results indicate that during impulse starting, the flow field is divided into three zones with different aerodynamic parameters by primary shock and upstream-facing shock. The separation bubble on the shoulder of ramp undergoes a generating, growing, swallowing and disappearing process in sequence. But a separation bubble at the entrance of inlet exists until the freestream velocity is accelerated to the starting Mach number during self starting. The mass flux distribution of flow field is non-uniform because of the interaction between shock and boundary layer, so that the mass flow rate at throat is unsteady during impulse starting. The duration of impulse starting process increases almost linearly with the decrease of freestream Mach number but rises abruptly when the freestream Mach number approaches the starting Mach number. The accelerating performance of booster almost has no influence on the self starting ability of hypersonic inlet.
