A design method based on tip to tail streamline tracing and osculating inward cone methods is discussed for designing the integrated Osculating Inward Cone Waverider Inlet（OICWI）. A practical geometrical constrained...A design method based on tip to tail streamline tracing and osculating inward cone methods is discussed for designing the integrated Osculating Inward Cone Waverider Inlet（OICWI）. A practical geometrical constrained experimental model of OICWI is designed based on the validated design method. It has a total contraction ratio of 4.61 and inner contraction ratio is 2.0. Wind-tunnel tests have been conducted for the OICWI model at free stream Mach number（Ma） of 4.0, 3.5 and 3.0 respectively. The experimental results show that the OICWI has high flow capture ratio and compression abilities. It can self-start at Ma= 3.5 and 4.0 and its flow capture ratio is 0.73 at Ma= 4.0, and Angle of Attack（AOA） 0°. The research results show that the OICWI has advantages of inward cone waverider and streamline tracing inlet. Present OICWI is a novel approach for waverider inlet integration studies and it will promote the use of waverider inlet integration configuration in the studies of airbreathing hypersonic vehicles.展开更多
Numerical simulations and experiments showed that bump inlet had a remarkable effect on boundary layer diversion of supersonic flow.However,the design and analysis of bump in hypersonic flow was still few.In this pape...Numerical simulations and experiments showed that bump inlet had a remarkable effect on boundary layer diversion of supersonic flow.However,the design and analysis of bump in hypersonic flow was still few.In this paper,the mechanism of a supersonic bump inlet is introduced to the design of hypersonic forebody.A hypersonic inlet with an integrated bump/forebody is obtained by the Method Of Characteristics(MOC)based on a chin inlet.Numerical simulations show that the modified inlet achieves diversion of low-speed flow.Besides,the integrated bump/-forebody is also beneficial to inlet start.During the starting process,the shape of the separation zone is rebuilt by the modified forebody surface which makes spillage much easier.This new design leads to a reduction of the self-start Mach number by 0.95.展开更多
In this work, a novel airframe/propulsion integration design method of the wing-body configuration for hypersonic cruise aircraft is proposed, where the configuration is integrated with inward-turning inlets. With the...In this work, a novel airframe/propulsion integration design method of the wing-body configuration for hypersonic cruise aircraft is proposed, where the configuration is integrated with inward-turning inlets. With the help of this method, the major design concern of balancing the aerodynamic performance against the requirements for efficient propulsion can be well addressed. A novel geometric parametrically modelling method based on a combination of patched class and shape transition（CST） and COONs surface is proposed to represent the configuration, especially a complex configuration with an irregular inlet lip shape. The modelling method enlarges the design space of components on the premise of guaranteeing the configuration integrity via special constraints imposed on the interface across adjacent surfaces. A basic flow inside a cone shaped by a dual-inflection-point generatrix is optimized to generate the inward-turning inlet with improvements of both compression efficiency and flow uniformity. The performance improvement mechanism of this basic flow is the compression velocity variation induced by the variation of the generatrix slope along the flow path. At the design point, numerical simulation results show that the lift-to-drag ratio of the configuration is as high as 5.2 and the inlet works well with a high level of compression efficiency and flow uniformity. The design result also has a good performance on off-design conditions. The achievement of all the design targets turns out that the integration design method proposed in this paper is efficient and practical.展开更多
Combined with a UAV of the shape like Global Hawk, a new inlet is advanced to obtain high performance in both Radar Cross Section(RCS) and aerodynamic drag. Efforts are made to achieve this goal such as adopting a top...Combined with a UAV of the shape like Global Hawk, a new inlet is advanced to obtain high performance in both Radar Cross Section(RCS) and aerodynamic drag. Efforts are made to achieve this goal such as adopting a top-mounted inlet configuration, utilizing the diverterless technique and putting forward a new shape of entrance. A design method is brought forward and verified by wind tunnel tests. Results indicate: (1) Despite the negative effect of the front fuselage and the absence of the conventional boundary diverter, the performance of the top-mounted diverterless inlet advanced here(Ma:0.50-0.70, α:-4°-6°,σ>0.975) is equivalent to that of conventional S shaped inlet with diverter; (2) The integration of the inlet with the fuselage is realized by the utilization of a special inlet section and the diverterless technique, which disposes the whole inlet in the shield of the head of UAV, improving the drag characteristics and the stealthy performance of the aircraft; (3) The bump which is equal to the local boundary layer thickness in height can divert the boundary layer effectively. As a result, no obvious low total pressure zone is found at the outlet of the inlet; (4) According to the experimental results, negative angle of attack is favorable to the total pressure recovery and positive angle of attack is favorable to the total pressure distortion, while yaw brings bad effects on both; (5) The design of cowl lip is of great importance to the inlet performance at yaw, therefore, further improvement of the inlet performance will rely on the lip shapes of the cowl chosen.展开更多
In the design of a hypersonic inward-turning inlet by applying the traditional basic flowfield, a reflected shock-wave is formed in the isolator due to the continuous reflection of the cowlreflected shock wave in the ...In the design of a hypersonic inward-turning inlet by applying the traditional basic flowfield, a reflected shock-wave is formed in the isolator due to the continuous reflection of the cowlreflected shock wave in the basic flow-field, which interacts with the boundary layer to produce a considerable influence on the performance of the inlet. Here, a basic flow-field design method that can control the velocity direction at the throat section is developed, and numerical simulations are conducted to demonstrate the effectiveness of this method. The method presented in this paper can achieve the absorption of the reflected waves at the shoulder of the basic flow-field by adjusting the variation law of the center radius in the basic flow-field, and a smooth transition between the compression surface and the isolator can also be produced. The Mach number and total pressure recovery coefficient of the inlet designed according to this method are 3.00 and 0.657, respectively, at design point(the incoming flow Mach number Ma1= 6.0). The results show that with this method, the inlet can efficiently weaken both the reflection of the shock wave and the interaction between the boundary layer and the reflected shock waves, which improves the aerodynamic performance of the inlet.展开更多
As one of the core components of turbocharger or micro-turbine, radial turbine has the features of small size and high rotation speed. In order to explore the design method and flow mechanism of the turbine with a vol...As one of the core components of turbocharger or micro-turbine, radial turbine has the features of small size and high rotation speed. In order to explore the design method and flow mechanism of the turbine with a volute, a centimeter-scale radial turbine with a vaneless air-inlet volute was designed and simulated numerically to investigate the characteristics of the coupled flow field. The results show that the wheel efficiency of single passage computation without the volute is 80.1%. After accounting for the factors of the loss caused by the volute and the interaction between each passage, the performance is more accurate according to the whole flow passage computation with the volute. High load region gathers at the mid-span and the efficiency declines to 76.6%. The performance of the volute whose structure angle of the trapezoid section is equal to 70 degree is better. Unlike uniform inlet condition in single passage, more appropriate inlet flow for the impeller is provided by the rectification effect of the volute in full passage calculation. Flow parameters are distributed more evenly along the blade span and are generally consistent between each passage at the outlet of the turbine.展开更多
An inverse method of characteristics was introduced into the design concept of using osculating cones (OC) in the supersonic flow, which can extend the domain of options for generating the aerospace vehicle configura...An inverse method of characteristics was introduced into the design concept of using osculating cones (OC) in the supersonic flow, which can extend the domain of options for generating the aerospace vehicle configurations with supersonic leading edge as well as inlet diffusers. Some more practical waverider shapes with higher volumetric efficiency can be obtained through using the concept of osculating axisymmetric (OA) flows with rotationality in the post shock flow field by inputting curved shocks.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 51376192 and 91216303)
文摘A design method based on tip to tail streamline tracing and osculating inward cone methods is discussed for designing the integrated Osculating Inward Cone Waverider Inlet（OICWI）. A practical geometrical constrained experimental model of OICWI is designed based on the validated design method. It has a total contraction ratio of 4.61 and inner contraction ratio is 2.0. Wind-tunnel tests have been conducted for the OICWI model at free stream Mach number（Ma） of 4.0, 3.5 and 3.0 respectively. The experimental results show that the OICWI has high flow capture ratio and compression abilities. It can self-start at Ma= 3.5 and 4.0 and its flow capture ratio is 0.73 at Ma= 4.0, and Angle of Attack（AOA） 0°. The research results show that the OICWI has advantages of inward cone waverider and streamline tracing inlet. Present OICWI is a novel approach for waverider inlet integration studies and it will promote the use of waverider inlet integration configuration in the studies of airbreathing hypersonic vehicles.
文摘Numerical simulations and experiments showed that bump inlet had a remarkable effect on boundary layer diversion of supersonic flow.However,the design and analysis of bump in hypersonic flow was still few.In this paper,the mechanism of a supersonic bump inlet is introduced to the design of hypersonic forebody.A hypersonic inlet with an integrated bump/forebody is obtained by the Method Of Characteristics(MOC)based on a chin inlet.Numerical simulations show that the modified inlet achieves diversion of low-speed flow.Besides,the integrated bump/-forebody is also beneficial to inlet start.During the starting process,the shape of the separation zone is rebuilt by the modified forebody surface which makes spillage much easier.This new design leads to a reduction of the self-start Mach number by 0.95.
基金supported by the ‘‘111" Project of China (No. B17037)
文摘In this work, a novel airframe/propulsion integration design method of the wing-body configuration for hypersonic cruise aircraft is proposed, where the configuration is integrated with inward-turning inlets. With the help of this method, the major design concern of balancing the aerodynamic performance against the requirements for efficient propulsion can be well addressed. A novel geometric parametrically modelling method based on a combination of patched class and shape transition（CST） and COONs surface is proposed to represent the configuration, especially a complex configuration with an irregular inlet lip shape. The modelling method enlarges the design space of components on the premise of guaranteeing the configuration integrity via special constraints imposed on the interface across adjacent surfaces. A basic flow inside a cone shaped by a dual-inflection-point generatrix is optimized to generate the inward-turning inlet with improvements of both compression efficiency and flow uniformity. The performance improvement mechanism of this basic flow is the compression velocity variation induced by the variation of the generatrix slope along the flow path. At the design point, numerical simulation results show that the lift-to-drag ratio of the configuration is as high as 5.2 and the inlet works well with a high level of compression efficiency and flow uniformity. The design result also has a good performance on off-design conditions. The achievement of all the design targets turns out that the integration design method proposed in this paper is efficient and practical.
文摘Combined with a UAV of the shape like Global Hawk, a new inlet is advanced to obtain high performance in both Radar Cross Section(RCS) and aerodynamic drag. Efforts are made to achieve this goal such as adopting a top-mounted inlet configuration, utilizing the diverterless technique and putting forward a new shape of entrance. A design method is brought forward and verified by wind tunnel tests. Results indicate: (1) Despite the negative effect of the front fuselage and the absence of the conventional boundary diverter, the performance of the top-mounted diverterless inlet advanced here(Ma:0.50-0.70, α:-4°-6°,σ>0.975) is equivalent to that of conventional S shaped inlet with diverter; (2) The integration of the inlet with the fuselage is realized by the utilization of a special inlet section and the diverterless technique, which disposes the whole inlet in the shield of the head of UAV, improving the drag characteristics and the stealthy performance of the aircraft; (3) The bump which is equal to the local boundary layer thickness in height can divert the boundary layer effectively. As a result, no obvious low total pressure zone is found at the outlet of the inlet; (4) According to the experimental results, negative angle of attack is favorable to the total pressure recovery and positive angle of attack is favorable to the total pressure distortion, while yaw brings bad effects on both; (5) The design of cowl lip is of great importance to the inlet performance at yaw, therefore, further improvement of the inlet performance will rely on the lip shapes of the cowl chosen.
基金supported by the National Natural Science Foundation of China (Nos. 11702229, 11602207 and 91641103)
文摘In the design of a hypersonic inward-turning inlet by applying the traditional basic flowfield, a reflected shock-wave is formed in the isolator due to the continuous reflection of the cowlreflected shock wave in the basic flow-field, which interacts with the boundary layer to produce a considerable influence on the performance of the inlet. Here, a basic flow-field design method that can control the velocity direction at the throat section is developed, and numerical simulations are conducted to demonstrate the effectiveness of this method. The method presented in this paper can achieve the absorption of the reflected waves at the shoulder of the basic flow-field by adjusting the variation law of the center radius in the basic flow-field, and a smooth transition between the compression surface and the isolator can also be produced. The Mach number and total pressure recovery coefficient of the inlet designed according to this method are 3.00 and 0.657, respectively, at design point(the incoming flow Mach number Ma1= 6.0). The results show that with this method, the inlet can efficiently weaken both the reflection of the shock wave and the interaction between the boundary layer and the reflected shock waves, which improves the aerodynamic performance of the inlet.
基金Supported by the Innovative Research Groups of the National Natural Science Foundation of China(No.51121004)the National Natural Science Foundation of China(No.50976026)
文摘As one of the core components of turbocharger or micro-turbine, radial turbine has the features of small size and high rotation speed. In order to explore the design method and flow mechanism of the turbine with a volute, a centimeter-scale radial turbine with a vaneless air-inlet volute was designed and simulated numerically to investigate the characteristics of the coupled flow field. The results show that the wheel efficiency of single passage computation without the volute is 80.1%. After accounting for the factors of the loss caused by the volute and the interaction between each passage, the performance is more accurate according to the whole flow passage computation with the volute. High load region gathers at the mid-span and the efficiency declines to 76.6%. The performance of the volute whose structure angle of the trapezoid section is equal to 70 degree is better. Unlike uniform inlet condition in single passage, more appropriate inlet flow for the impeller is provided by the rectification effect of the volute in full passage calculation. Flow parameters are distributed more evenly along the blade span and are generally consistent between each passage at the outlet of the turbine.
文摘An inverse method of characteristics was introduced into the design concept of using osculating cones (OC) in the supersonic flow, which can extend the domain of options for generating the aerospace vehicle configurations with supersonic leading edge as well as inlet diffusers. Some more practical waverider shapes with higher volumetric efficiency can be obtained through using the concept of osculating axisymmetric (OA) flows with rotationality in the post shock flow field by inputting curved shocks.
