Ink-jetting printing stands out among various conformal additive manufacturing techniques for its multi-material,digital control,and process flexibility.Ink-jetting-based conformal additive manufacturing is renowned f...Ink-jetting printing stands out among various conformal additive manufacturing techniques for its multi-material,digital control,and process flexibility.Ink-jetting-based conformal additive manufacturing is renowned for its adaptability to complex topological surfaces and is emerging as a critical technology for future comprehensive conformal printing systems.This review highlights the distinctiveness of four primary ink-jetting printing techniques in conformal additive manufacturing—piezoelectric jetting,thermal bubble jetting,aerosol jetting,and electrohydrodynamic jetting—and delves into how these attributes endow ink-jetting printing with unique advantages in conformal processes.Furthermore,leveraging these advantages,the review discusses potential applications in conformal electronics,energy devices,biology,and electromagnetics to bolster the ongoing development and application.Considering the current state of this technology,the review identifies critical challenges for future advancements,such as dynamic surface printing,integrated fabrication of multifunctional conformal structures,and the balance between resolution and throughput.This review summarizes the latest research and technological advancements in ink-jetting-based conformal additive manufacturing,aiding in its innovative applications and enhanced manufacturing capabilities in the future.展开更多
Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and posse...Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.展开更多
Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO)...Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.展开更多
Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching...Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching model based on two step learning is established by finding a linear model by learning pure color data first and then a nonlinear modification model by learning mixed color data. Nonlinear multiple regression is used to fit the parameters of the modification model. Nonlinear modification function is discovered by BACON system by learning mixture data. Experiment results indicate that nonlinear color conversion by two step learning can further improve the accuracy when it is used for straightforward conversion from RGB to CMYK. An improved separation model based on GCR concept is proposed to solve the problem of gray balance and it can be used for three to four color conversion as well. The method proposed has better learning ability and faster printing speed than other historical approaches when it is applied to four color ink jet printing.展开更多
In this paper,the effects of four sorts of silica with the particle size range of 4~10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can p...In this paper,the effects of four sorts of silica with the particle size range of 4~10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can provide the coated paper with higher density and contrast,better definition and good printing performance.展开更多
The crystalline fullerene C60 particles were formed and immobilized on poly(dimethylsiloxane) (PDMS) substrates under the various discharge conditions by an ink-jet method, and investigated for the reactive oxygen spe...The crystalline fullerene C60 particles were formed and immobilized on poly(dimethylsiloxane) (PDMS) substrates under the various discharge conditions by an ink-jet method, and investigated for the reactive oxygen species (ROS) generation property under visible light irradiation. The particles were synthesized by discharging a toluene solution dissolved C60 and poly(methyl methacrylate) (PMMA) with the ink-jet spotting system. The ROS generation was evaluated by comparisons of the fluorescence intensities measured for the formed particles under green laser irradiation and in a dark room using fluorescent dyes, 2’,7’-dichlorofluorescein diacetate and dihydroethidium. The results of transmission electron microscope (TEM) observation showed that the formed particles consisted of crystalline C60. The optimal ink-jet discharge conditions for synthesizing the particles to generate more ROS were found. In the case of the optimal conditions, the structure in which the needle-like particles were three-dimensionally formed was confirmed. The surface area of the crystalline C60 particles was calculated using the SEM observation results, and it was suggested that when the needle-like finer particles were three-dimensionally formed under the optimal conditions, increasing the surface area lead to an increase in the ROS generation amount.展开更多
Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing ...Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing advantages of large screen size and low cost. The challenges for realizing AM-QLED display are how to achieve high quality films through ink-jet printing, multi-color patterning, electroluminescence(EL) color purity, and high efficiency. Herein, a 2-inch diagonal full-color AM-QLEDs display with pixel density of 120 pixels per inch(PPI) fabricated by ink-jet printing technique is presented. Driven by a metal oxide TFT(MOTFT) back-panel, the display exhibits a maximum brightness of 400 cd m.2, and a color gamut of 109%(NTSC 1931). The red, green, and blue(RGB) monochrome QLEDs passive matrix panels fabricated by ink-jet printing technique have a current efficiency(CE) of 2.5, 13.9, and 0.30 cd A.1, respectively. To the best of our knowledge, the efficiencies are the highest among passive matrix QLEDs panels made by ink-jet printing technique. The ink-jet printed QDs films show good thickness uniformity due to high viscosity and low volatility of the printable inks, and no cross-contamination between adjacent pixels resulting from the hydrophobic pixel defining layer.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52005059 and 52375306)the Open Foundation of the Key Laboratory of Advanced Marine Materials(Grant No.2024K01)the Graduate Research and Innovation Foundation of Chongqing,China(Grant No.CYB240011)。
文摘Ink-jetting printing stands out among various conformal additive manufacturing techniques for its multi-material,digital control,and process flexibility.Ink-jetting-based conformal additive manufacturing is renowned for its adaptability to complex topological surfaces and is emerging as a critical technology for future comprehensive conformal printing systems.This review highlights the distinctiveness of four primary ink-jetting printing techniques in conformal additive manufacturing—piezoelectric jetting,thermal bubble jetting,aerosol jetting,and electrohydrodynamic jetting—and delves into how these attributes endow ink-jetting printing with unique advantages in conformal processes.Furthermore,leveraging these advantages,the review discusses potential applications in conformal electronics,energy devices,biology,and electromagnetics to bolster the ongoing development and application.Considering the current state of this technology,the review identifies critical challenges for future advancements,such as dynamic surface printing,integrated fabrication of multifunctional conformal structures,and the balance between resolution and throughput.This review summarizes the latest research and technological advancements in ink-jetting-based conformal additive manufacturing,aiding in its innovative applications and enhanced manufacturing capabilities in the future.
文摘Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.
文摘Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.
文摘Through discussing the color matching technology and its application in printing industry the conventional approaches commonly used in color matching, and the difficulties in color matching, a nonlinear color matching model based on two step learning is established by finding a linear model by learning pure color data first and then a nonlinear modification model by learning mixed color data. Nonlinear multiple regression is used to fit the parameters of the modification model. Nonlinear modification function is discovered by BACON system by learning mixture data. Experiment results indicate that nonlinear color conversion by two step learning can further improve the accuracy when it is used for straightforward conversion from RGB to CMYK. An improved separation model based on GCR concept is proposed to solve the problem of gray balance and it can be used for three to four color conversion as well. The method proposed has better learning ability and faster printing speed than other historical approaches when it is applied to four color ink jet printing.
文摘In this paper,the effects of four sorts of silica with the particle size range of 4~10μm on coated paper properties and printing performance were studied.The results showed that the smaller particle size silica can provide the coated paper with higher density and contrast,better definition and good printing performance.
文摘The crystalline fullerene C60 particles were formed and immobilized on poly(dimethylsiloxane) (PDMS) substrates under the various discharge conditions by an ink-jet method, and investigated for the reactive oxygen species (ROS) generation property under visible light irradiation. The particles were synthesized by discharging a toluene solution dissolved C60 and poly(methyl methacrylate) (PMMA) with the ink-jet spotting system. The ROS generation was evaluated by comparisons of the fluorescence intensities measured for the formed particles under green laser irradiation and in a dark room using fluorescent dyes, 2’,7’-dichlorofluorescein diacetate and dihydroethidium. The results of transmission electron microscope (TEM) observation showed that the formed particles consisted of crystalline C60. The optimal ink-jet discharge conditions for synthesizing the particles to generate more ROS were found. In the case of the optimal conditions, the structure in which the needle-like particles were three-dimensionally formed was confirmed. The surface area of the crystalline C60 particles was calculated using the SEM observation results, and it was suggested that when the needle-like finer particles were three-dimensionally formed under the optimal conditions, increasing the surface area lead to an increase in the ROS generation amount.
基金supported by the National Key Basic Research and Development Program of China (2015CB655004)the National Natural Science Foundation of China (U1601651, 51521002, U1301243, 61574061)the Educational Commission of Guangdong Province (2015B090914003, 2014KZDXM012)
文摘Making full-color active matrix display based on quantum dot light emitting diodes(AM-QLEDs) via ink-jet printing is attractive in display industry due to QLEDs' wide color gamut and their potential manufacturing advantages of large screen size and low cost. The challenges for realizing AM-QLED display are how to achieve high quality films through ink-jet printing, multi-color patterning, electroluminescence(EL) color purity, and high efficiency. Herein, a 2-inch diagonal full-color AM-QLEDs display with pixel density of 120 pixels per inch(PPI) fabricated by ink-jet printing technique is presented. Driven by a metal oxide TFT(MOTFT) back-panel, the display exhibits a maximum brightness of 400 cd m.2, and a color gamut of 109%(NTSC 1931). The red, green, and blue(RGB) monochrome QLEDs passive matrix panels fabricated by ink-jet printing technique have a current efficiency(CE) of 2.5, 13.9, and 0.30 cd A.1, respectively. To the best of our knowledge, the efficiencies are the highest among passive matrix QLEDs panels made by ink-jet printing technique. The ink-jet printed QDs films show good thickness uniformity due to high viscosity and low volatility of the printable inks, and no cross-contamination between adjacent pixels resulting from the hydrophobic pixel defining layer.
