In practical engineering, finite element（FE） modeling for weld seam is commonly simplified by neglecting its inhomogeneous mechanical properties. This will cause a significant loss in accuracy of FE forming analysis...In practical engineering, finite element（FE） modeling for weld seam is commonly simplified by neglecting its inhomogeneous mechanical properties. This will cause a significant loss in accuracy of FE forming analysis, in particular, for friction stir welded（FSW） blanks due to the large width and good formability of its weld seam. The inhomogeneous mechanical properties across weld seam need to be well characterized for an accurate FE analysis. Based on a similar AA5182 FSW blank, the metallographic observation and micro-Vickers hardness analysis upon the weld cross-section are performed to identify the interfaces of different sub-zones, i.e., heat affected zone（HAZ）, thermal-mechanically affected zone（TMAZ） and weld nugget（WN）. Based on the rule of mixture and hardness distribution, a constitutive model is established for each sub-zone to characterize the inhomogeneous mechanical properties across the weld seam. Uniaxial tensile tests of the AA5182 FSW blank are performed with the aid of digital image correlation（DIC） techniques. Experimental local stress-strain curves are obtained for different weld sub-zones. The experimental results show good agreement with those derived from the constitutive models, which demonstrates the feasibility and accuracy of these models. The proposed research gives an accurate characterization of inhomogeneous mechanical properties across the weld seam produced by FSW, which provides solutions for improving the FE simulation accuracy of FSW sheet forming.展开更多
We construct the fourth-order inhomogeneous generalized HS model and investigate the integrability property of the supersymmetric integrable system. Moreover, in terms of the gauge transformation, we investigate the c...We construct the fourth-order inhomogeneous generalized HS model and investigate the integrability property of the supersymmetric integrable system. Moreover, in terms of the gauge transformation, we investigate the corresponding gauge equivalent counterparts under two constraints, i.e., the super inhomogeneous generalized nonlinear Schr？dinger equation and the fermionic inhomogeneous generalized nonlinear Schr？dinger equation.展开更多
Individualized models of respiratory mechanics help to reduce potential harmful effects of mechanical ventilation by supporting the evaluation of patient-specific lung protective ventilation strategies. Assessing vent...Individualized models of respiratory mechanics help to reduce potential harmful effects of mechanical ventilation by supporting the evaluation of patient-specific lung protective ventilation strategies. Assessing ventilation inhomogeneities might be an important aspect in optimizing ventilator settings. The aim of this studyis to capture and analyze ventilation inhomogeneity by a mathematical model using clinical data. The results show that the lung physiology of mechanically ventilated patients without lung condition can be described by an inhomogeneity model revealing two alveolar compartments with median time constants of 0.4 and 3.9 s. Thus, the IHM in combination with specific ventilation maneuver might be suitable to capture lung physiology for model-based optimization of ventilator settings but requires additional image-based investigations to further support the validity of the model.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51375346)Doctoral Fund of Ministry of Education of China(Grant No.20110072110056)
文摘In practical engineering, finite element（FE） modeling for weld seam is commonly simplified by neglecting its inhomogeneous mechanical properties. This will cause a significant loss in accuracy of FE forming analysis, in particular, for friction stir welded（FSW） blanks due to the large width and good formability of its weld seam. The inhomogeneous mechanical properties across weld seam need to be well characterized for an accurate FE analysis. Based on a similar AA5182 FSW blank, the metallographic observation and micro-Vickers hardness analysis upon the weld cross-section are performed to identify the interfaces of different sub-zones, i.e., heat affected zone（HAZ）, thermal-mechanically affected zone（TMAZ） and weld nugget（WN）. Based on the rule of mixture and hardness distribution, a constitutive model is established for each sub-zone to characterize the inhomogeneous mechanical properties across the weld seam. Uniaxial tensile tests of the AA5182 FSW blank are performed with the aid of digital image correlation（DIC） techniques. Experimental local stress-strain curves are obtained for different weld sub-zones. The experimental results show good agreement with those derived from the constitutive models, which demonstrates the feasibility and accuracy of these models. The proposed research gives an accurate characterization of inhomogeneous mechanical properties across the weld seam produced by FSW, which provides solutions for improving the FE simulation accuracy of FSW sheet forming.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11605096 and 11601247the Science Research Project of Inner Mongolia University of Technology under Grant No ZD201613the Innovation Foundation of Inner Mongolia University for the College Students under Grant No 201711208
文摘We construct the fourth-order inhomogeneous generalized HS model and investigate the integrability property of the supersymmetric integrable system. Moreover, in terms of the gauge transformation, we investigate the corresponding gauge equivalent counterparts under two constraints, i.e., the super inhomogeneous generalized nonlinear Schr？dinger equation and the fermionic inhomogeneous generalized nonlinear Schr？dinger equation.
基金The German Federal Ministry of Education and Research (WiM-Vent, Grants01IB10002D, PulMODS Grant 01DR12095) EU FP7 PIRSES--GA-2012-318943 eTime
文摘Individualized models of respiratory mechanics help to reduce potential harmful effects of mechanical ventilation by supporting the evaluation of patient-specific lung protective ventilation strategies. Assessing ventilation inhomogeneities might be an important aspect in optimizing ventilator settings. The aim of this studyis to capture and analyze ventilation inhomogeneity by a mathematical model using clinical data. The results show that the lung physiology of mechanically ventilated patients without lung condition can be described by an inhomogeneity model revealing two alveolar compartments with median time constants of 0.4 and 3.9 s. Thus, the IHM in combination with specific ventilation maneuver might be suitable to capture lung physiology for model-based optimization of ventilator settings but requires additional image-based investigations to further support the validity of the model.
