In this manuscript,Eshelby tensor is employed to assess the strain concentration that arises in the matrix phase at the interface,offering precise values and locations of maximum strain under specific loading conditio...In this manuscript,Eshelby tensor is employed to assess the strain concentration that arises in the matrix phase at the interface,offering precise values and locations of maximum strain under specific loading conditions for both spherical and cylindrical inclusions.When compared to numerical simulation results,the analytical predictions grounded in the Eshelby tensor exhibit satisfactory accuracy.Then an analytical calculation method based on Eshelby tensor for the elastic strain influence functions of reduced-order homogenization(ROH)method is developed and adopted on particle-reinforced and fibrous composites,presenting its feasibility and advantage on off-line stage calculation of ROH method.The error analyses between analytical and numerical results are conducted.The numerical results also exhibit the necessity of finer interface partitioning to obtain the response on micro-scale with higher resolution.展开更多
As a non-contact ultra-precision machining method,abrasive water jet polishing(AWJP)has signi-ficant application in optical elements processing due to its stable tool influence function(TIF),no subsurface damage and s...As a non-contact ultra-precision machining method,abrasive water jet polishing(AWJP)has signi-ficant application in optical elements processing due to its stable tool influence function(TIF),no subsurface damage and strong adaptability to workpiece shapes.In this study,the effects of jet pressure,nozzle diameter and impinging angle on the distribution of pressure,velocity and wall shear stress in the polishing flow field were systematically analyzed by computational fluid dynamics(CFD)simulation.Based on the Box-Behnken experimental design,a response surface regression model was constructed to investigate the influence mech-anism of process parameters on material removal rate(MRR)and surface roughness(Ra)of fused silica.And experimental results showed that increasing jet pressure and nozzle diameter significantly improved MRR,consistent with shear stress distribution revealed by CFD simulations.However,increasing jet pressure and impinging angle caused higher Ra values,which was unfavorable for surface quality improvement.Genetic algorithm(GA)was used for multi-objective optimization to establish Pareto solutions,achieving concurrent optimization of polishing efficiency and surface quality.A parameter combination of 2 MPa jet pressure,0.3 mm nozzle diameter,and 30°impinging angle achieved MRR of 169.05μm^(3)/s and Ra of 0.50 nm.Exper-imental verification showed prediction errors of 4.4%(MRR)and 3.8%(Ra),confirming the model’s reliabil-ity.This parameter optimization system provides theoretical basis and technical support for ultra-precision polishing of complex curved optical components.展开更多
Prediction of surface subsidence caused by longwall mining operation in inclined coal seams is often very challenging. The existing empirical prediction methods are inflexible for varying geological and mining conditi...Prediction of surface subsidence caused by longwall mining operation in inclined coal seams is often very challenging. The existing empirical prediction methods are inflexible for varying geological and mining conditions. An improved influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, the original Knothe function has been transformed to produce a continuous and asymmetrical subsidence influence function. The empirical equations for final subsidence parameters derived from col- lected longwall subsidence data have been incorporated into the mathematical models to improve the prediction accuracy. A number of demonstration cases for longwall mining operations in coal seams with varying inclination angles, depths and panel widths have been used to verify the applicability of the new subsidence prediction model.展开更多
The distribution of the final surface subsidence basin induced by longwall operations in inclined coal seam could be significantly different from that in flat coal seam and demands special prediction methods. Though m...The distribution of the final surface subsidence basin induced by longwall operations in inclined coal seam could be significantly different from that in flat coal seam and demands special prediction methods. Though many empirical prediction methods have been developed, these methods are inflexible for varying geological and mining conditions. An influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, significant modifications have been made to the original Knothe function to produce an asymmetrical influence function. The empirical equations for final subsidence parameters derived from US subsidence data and Chinese empirical values have been incorpo- rated into the mathematical models to improve the prediction accuracy. A corresponding computer program is developed. A number of subsidence cases for longwall mining operations in coal seams with varying inclination angles have been used to demonstrate the applicability of the developed subsidence prediction model.展开更多
In this paper,the Kalman filter(KF)and the unbiased finite impulse response(UFIR)filter are fused in the discrete-time state-space to improve robustness against uncertainties.To avoid the problem where fusion filters ...In this paper,the Kalman filter(KF)and the unbiased finite impulse response(UFIR)filter are fused in the discrete-time state-space to improve robustness against uncertainties.To avoid the problem where fusion filters may give up some advantages of UFIR filters by fusing based on noise statistics,we attempt to find a way to fuse without using noise statistics.The fusion filtering algorithm is derived using the influence function that provides a quantified measure for disturbances on the resulting filtering outputs and is termed as an influence finite impulse response(IFIR)filter.The main advantage of the proposed method is that the noise statistics of process noise and measurement noise are no longer required in the fusion process,showing that a critical feature of the UFIR filter is inherited.One numerical example and a practice-oriented case are given to illustrate the effectiveness of the proposed method.It is shown that the IFIR filter has adaptive performance and can automatically switch from the Kalman estimate to the UFIR estimates according to operating conditions.Moreover,the proposed method can reduce the effects of optimal horizon length on the UFIR estimate and can give the state estimates of best accuracy among all the compared methods.展开更多
The error of gaugemeter equation decreases the gap setting precision.The precision of gaugemeter equation is strongly influenced by plate width,work roll radius,backup roll radius,work roll crown,backup roll crown and...The error of gaugemeter equation decreases the gap setting precision.The precision of gaugemeter equation is strongly influenced by plate width,work roll radius,backup roll radius,work roll crown,backup roll crown and rolling force.And these influences are hard to measure.All these factors are converted to roll deflection deformation and roll flattening deformation for calculation.In order to calculate the deformation,the theory of influence function method was adopted.By using simulation program,the influence of these factors on deformation was obtained.Then a simple model can be built.With this model,it is convenient to analyze the influence of different factors on gaugemeter equation.展开更多
The necessity for understanding normal human cognitive processes and behavior, and themechanisrns which result in dysfunction in these processes are dependant on utilization of a suitable animal model. In order to dev...The necessity for understanding normal human cognitive processes and behavior, and themechanisrns which result in dysfunction in these processes are dependant on utilization of a suitable animal model. In order to develop pharmaceutical agents to alleviate mental disturbances and enable the individual to cope within the norms of society, it is incumbent upon investigators to choose a species in which pharmacokinetic principles are established and resemble those of hurnans. The choice of rats in cognition research studies has specific advantages in that these anirnals possess similar pharrnacodynamic parameters to hurnans. Further advantages include availability, low cost, ease of breeding, maintenance and an extensive literature database which enable comparisons to present findings. However, there are substantial differences in the perforrnance of various rat strains in tasks of learning, memory, attention, and responses to stress or drugs. In addition to rat strain, quantity of thed also exerts profound consequences on animal behavior. The aim of this review is to demonstrate that there are differences in the central nervous systern responsivencess of rat strains to chemicals and these could be related to factors such as source of supplier, type and quantity of feed, or season of the year. It is also evident that the genotype differs amongst strains and this may be responsible for the observed differences in CNS sensitivity to chemicals. Strain differences must be identified and taken into consideration in interpretation of assessrnent of neurobehavioural functions. It is also incumbent upon the investigators to utilize healthy (diet-controlled) animal models.展开更多
A conservative transport operator in space (v//,r) and moment equations are used to describe the combined effects of a stochastic magnetic field and a radial ambipolar electric field on the electrons. The transport o...A conservative transport operator in space (v//,r) and moment equations are used to describe the combined effects of a stochastic magnetic field and a radial ambipolar electric field on the electrons. The transport operator is coupled with Fokker-planck and Ohmic heating terms to compute the electron distribution function. A physical picture exhibits the possible importance of the turbulent magnetic field on the suprathermal electrons, which may be concerned with plasma confinement.展开更多
Objective To investigate hidden blood loss after various types of intertrochanteric fractures and to determine whether oral iron supplementations is benefical for the postoperative functional recovery in elderly patie...Objective To investigate hidden blood loss after various types of intertrochanteric fractures and to determine whether oral iron supplementations is benefical for the postoperative functional recovery in elderly patients.Methods From展开更多
We study the dynamics of a quantum dissipative system. Besides its linear coupling with a harmonic bath modelling the dissipation, we suppose that it is coupled with an oscillator with an interaction of the form s 2 x...We study the dynamics of a quantum dissipative system. Besides its linear coupling with a harmonic bath modelling the dissipation, we suppose that it is coupled with an oscillator with an interaction of the form s 2 x 2 . In our study, we integrate over the bath and the oscillator, extract the corresponding influence functionals and then solve the system’s sign problem. We apply the theory to the case of a double well and study the time evolution of the expectation value of the position.展开更多
The strip flatness and crown control model is the foundation of automatic strip shape control. Considering the metal transverse flows and the inter stand second deformation, the trip flatness and crown control model h...The strip flatness and crown control model is the foundation of automatic strip shape control. Considering the metal transverse flows and the inter stand second deformation, the trip flatness and crown control model has been developed, which can be applied to CVC mills and PC mills as well as normal four-high mills. The strip flatness and crown control model has high precision, and has been successfully applied to the automatic strip shape control system reconstruction of Tangshan Ganglu 1 250 mm hot strip plant.展开更多
In flatness measuring system, the flatness measuring signal can be affected by the deflection of flatness measuring roll. The stress on flatness measuring roll was analyzed and a deflection model for the flatness meas...In flatness measuring system, the flatness measuring signal can be affected by the deflection of flatness measuring roll. The stress on flatness measuring roll was analyzed and a deflection model for the flatness measuring roll was obtained by using the influence function method. The model was developed on the basis of the deformation of flatness measuring roll in roiling process and compensation curve was obtained. The results indicated that the set curve of flatness is in good agreement with the online measured curve of flatness, and good strip flatness can be obtained.展开更多
The calculation error of the gauge-meter model will affect the gap setting precision and the self-learn precision of rolling force. The precision of the gauge-meter model is strongly influenced by plate width, working...The calculation error of the gauge-meter model will affect the gap setting precision and the self-learn precision of rolling force. The precision of the gauge-meter model is strongly influenced by plate width, working roll radius, backup roll radius, working roll crown, backup roll crown, and rolling force. The influence rules are hard to get by measuring. Taking a conventional 4-h plate mill as the research subject, these influences were transferred into the calculation of roll deflection and flattening deformation. To calculate these deformations, the theory of the influence function method was adopted. By modifying the traditional gauge-meter model, a novel model of the effect of roll elastic deformation on the gap setting was built by data fitting. By this model, it was convenient to analyze the variation caused by the rolling condition. Combining the elastic deformation model of rolls with the kiss-rolls method, a gauge-meter model was put forward for plate thickness prediction. The prediction precision of thickness was greatly improved by the new gauge- meter model.展开更多
Coal and ore underground mining generates subsidence and deformation of the land surface. Those defor- mations may cause damage to buildings and infrastructures. The environmental impact of subsidence will not be acce...Coal and ore underground mining generates subsidence and deformation of the land surface. Those defor- mations may cause damage to buildings and infrastructures. The environmental impact of subsidence will not be accepted in the future by the society in many countries. Especially acceptance of the ground deformations decreases every year there, where the mining regions are densely urbanized, the The only solution is to limit the subsidence or its impact on the infrastructure. The first is not rentable for the mining industry, the second depends on the precise subsidence prediction and good preventing management involved in the mining areas. The precision of the subsidence prediction depends strictly on the mathematical model of the deformation phenomenon and on the uncertainty of the input data. The subsidence prediction in the geological conditions of the raw materials used to be made on the basis of numerical modeling or the stochastic models. A modified solution of the stochastic model by Knothe will be presented in the paper. The author focuses on the precise description of the deposit shape and on the time dependent displacements of the rock mass. A two parameters＇ time function has been introduced in the algorithm.展开更多
Optical membrane mirrors are promising key components for future space telescopes. Due to their ultra-thin and high flexible properties, the surfaces of these membrane mirrors are susceptible to temperature variations...Optical membrane mirrors are promising key components for future space telescopes. Due to their ultra-thin and high flexible properties, the surfaces of these membrane mirrors are susceptible to temperature variations. Therefore adaptive shape control of the mirror is essential to maintain the surface precision and to ensure its working performance. However, researches on modeling and control of membrane mirrors under thermal loads are sparse in open literatures. A 0.2 m diameter scale model of a polyimide membrane mirror is developed in this study. Three Polyvinylidene fluoride(PVDF) patches are laminated on the non-reflective side of the membrane mirror to serve as in-plane actuators. A new mathematical model of the piezoelectric actuated membrane mirror in multiple fields,(i.e., thermal,mechanical, and electrical field) is established, with which dynamic and static behaviors of the mirror can be analyzed.A closed-loop membrane mirror shape control system is set up and a surface shape control method based on an influence function matrix of the mirror is then investigated. Several experiments including surface displacement tracking and thermal deformation alleviation are performed. The deviations range from 15 μm to 20 μm are eliminated within 0.1 s and the residual deformation is controlled to micron level, which demonstrates the effectiveness of the proposed membrane shape control strategy and shows a satisfactory real-time performance. The proposed research provides a technological support and instruction for shape control of optical membrane mirrors.展开更多
This paper presents a formulation for solving three-dimensional moving punch problem. It proves that Galin's theorem holds for the punch. As an example, the study offers some results (including numerical data) of ...This paper presents a formulation for solving three-dimensional moving punch problem. It proves that Galin's theorem holds for the punch. As an example, the study offers some results (including numerical data) of dynamic displacement over an ellipse contact region.展开更多
The method to predict roll deformation precisely and efficiently is vital for the strip shape control of a six-high rolling mill. Traditional calculation methods of roll deformation, such as the finite element method ...The method to predict roll deformation precisely and efficiently is vital for the strip shape control of a six-high rolling mill. Traditional calculation methods of roll deformation, such as the finite element method and the influence function method, have been widely used due to their accuracies. However, the required calculation time is too long to be applied to the realtime control. Therefore, a rapid calculation method for predicting roll deformation of a six-high rolling mill was proposed, which employed the finite difference method to calculate the roll deflection and used a polynomial to describe the nonlinear relationship between roll flattening and roll contact pressure. Furthermore, a new correction strategy was proposed in the iteration, where the roll center flattening and the roll flattening deviation were put forward and corrected simultaneously in the iteration process according to the static equilibrium of roll. Finally, by the comparison with traditional methods, the proposed method was proved to be more efficient and it was suitable for the online calculation of the strip shape control.展开更多
A line contact model of elastic coated solids is presented based on the influence coefficients(ICs) of surface displacement and stresses of coating-substrate system and the traditional contact model. The ICs of displa...A line contact model of elastic coated solids is presented based on the influence coefficients(ICs) of surface displacement and stresses of coating-substrate system and the traditional contact model. The ICs of displacement and stresses are obtained from their corresponding frequency response functions(FRF) by using a conversion method based on fast Fourier transformation(FFT). The contact pressure and the stress field in the subsurface are obtained by employing conjugate gradient method(CGM) and discrete convolution fast Fourier transformation(DC-FFT). Comparison of the contact pressure and subsurface stresses obtained by the numerical method with the exact analytical solutions for Hertz contact is conducted, and the results show that the numerical solution has a very high accuracy and verify the validity of the contact model. The effect of the stiffness and thickness of coatings is further numerically studied. The result shows that the effects on contact pressure and contact width are opposite for hard and soft coatings and are intensified with the increase of coating thickness; the locations of crack initiation and propagation are different for soft and hard coatings; the risk of cracks and delaminations of coatings can be brought down by improving the lubrication condition or optimizing the non-dimensional parameter h/bh. This research offers a tool to numerically analyze the problem of elastic coated solids in line contact and make the blindness and randomness of trial-type coating design less.展开更多
Accurate expression for photoabsorption (photoionization) cross sections of high density system proposed recently is used to study the photoionization of solid gold. The results show that the present theoretical photo...Accurate expression for photoabsorption (photoionization) cross sections of high density system proposed recently is used to study the photoionization of solid gold. The results show that the present theoretical photoianization cross sections have good agreement both in structure and in magnitude with the experimental results of gold crystal. The studies also indicate that both the real part epsilon' and the imaginary part epsilon' of the complex dielectric constant epsilon and the dielectric influence function of a nonideal system have rich structures in low energy side with a range about 50 eV, and suggest that the influence of particle interactions of surrounding particles with the photoionized particle on the photoionization cross sections can be easily investigated using the dielectric influence function. The electron overlap effects are suggested to be implemented in the future studies to improve the accuracy of theoretical photoionization cross sections of a solid system.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.11988102 and 12172009)the National Key Research and Development Program of China(Grant No.2020YFA0710500)。
文摘In this manuscript,Eshelby tensor is employed to assess the strain concentration that arises in the matrix phase at the interface,offering precise values and locations of maximum strain under specific loading conditions for both spherical and cylindrical inclusions.When compared to numerical simulation results,the analytical predictions grounded in the Eshelby tensor exhibit satisfactory accuracy.Then an analytical calculation method based on Eshelby tensor for the elastic strain influence functions of reduced-order homogenization(ROH)method is developed and adopted on particle-reinforced and fibrous composites,presenting its feasibility and advantage on off-line stage calculation of ROH method.The error analyses between analytical and numerical results are conducted.The numerical results also exhibit the necessity of finer interface partitioning to obtain the response on micro-scale with higher resolution.
文摘As a non-contact ultra-precision machining method,abrasive water jet polishing(AWJP)has signi-ficant application in optical elements processing due to its stable tool influence function(TIF),no subsurface damage and strong adaptability to workpiece shapes.In this study,the effects of jet pressure,nozzle diameter and impinging angle on the distribution of pressure,velocity and wall shear stress in the polishing flow field were systematically analyzed by computational fluid dynamics(CFD)simulation.Based on the Box-Behnken experimental design,a response surface regression model was constructed to investigate the influence mech-anism of process parameters on material removal rate(MRR)and surface roughness(Ra)of fused silica.And experimental results showed that increasing jet pressure and nozzle diameter significantly improved MRR,consistent with shear stress distribution revealed by CFD simulations.However,increasing jet pressure and impinging angle caused higher Ra values,which was unfavorable for surface quality improvement.Genetic algorithm(GA)was used for multi-objective optimization to establish Pareto solutions,achieving concurrent optimization of polishing efficiency and surface quality.A parameter combination of 2 MPa jet pressure,0.3 mm nozzle diameter,and 30°impinging angle achieved MRR of 169.05μm^(3)/s and Ra of 0.50 nm.Exper-imental verification showed prediction errors of 4.4%(MRR)and 3.8%(Ra),confirming the model’s reliabil-ity.This parameter optimization system provides theoretical basis and technical support for ultra-precision polishing of complex curved optical components.
文摘Prediction of surface subsidence caused by longwall mining operation in inclined coal seams is often very challenging. The existing empirical prediction methods are inflexible for varying geological and mining conditions. An improved influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, the original Knothe function has been transformed to produce a continuous and asymmetrical subsidence influence function. The empirical equations for final subsidence parameters derived from col- lected longwall subsidence data have been incorporated into the mathematical models to improve the prediction accuracy. A number of demonstration cases for longwall mining operations in coal seams with varying inclination angles, depths and panel widths have been used to verify the applicability of the new subsidence prediction model.
文摘The distribution of the final surface subsidence basin induced by longwall operations in inclined coal seam could be significantly different from that in flat coal seam and demands special prediction methods. Though many empirical prediction methods have been developed, these methods are inflexible for varying geological and mining conditions. An influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, significant modifications have been made to the original Knothe function to produce an asymmetrical influence function. The empirical equations for final subsidence parameters derived from US subsidence data and Chinese empirical values have been incorpo- rated into the mathematical models to improve the prediction accuracy. A corresponding computer program is developed. A number of subsidence cases for longwall mining operations in coal seams with varying inclination angles have been used to demonstrate the applicability of the developed subsidence prediction model.
基金supported in part by the National Natural Science Foundation of China(61973136,61991402,61833007)the Natural Science Foundation of Jiangsu Province(BK20211528)。
文摘In this paper,the Kalman filter(KF)and the unbiased finite impulse response(UFIR)filter are fused in the discrete-time state-space to improve robustness against uncertainties.To avoid the problem where fusion filters may give up some advantages of UFIR filters by fusing based on noise statistics,we attempt to find a way to fuse without using noise statistics.The fusion filtering algorithm is derived using the influence function that provides a quantified measure for disturbances on the resulting filtering outputs and is termed as an influence finite impulse response(IFIR)filter.The main advantage of the proposed method is that the noise statistics of process noise and measurement noise are no longer required in the fusion process,showing that a critical feature of the UFIR filter is inherited.One numerical example and a practice-oriented case are given to illustrate the effectiveness of the proposed method.It is shown that the IFIR filter has adaptive performance and can automatically switch from the Kalman estimate to the UFIR estimates according to operating conditions.Moreover,the proposed method can reduce the effects of optimal horizon length on the UFIR estimate and can give the state estimates of best accuracy among all the compared methods.
基金Sponsored by National Natural Science Foundation of China(50104004)
文摘The error of gaugemeter equation decreases the gap setting precision.The precision of gaugemeter equation is strongly influenced by plate width,work roll radius,backup roll radius,work roll crown,backup roll crown and rolling force.And these influences are hard to measure.All these factors are converted to roll deflection deformation and roll flattening deformation for calculation.In order to calculate the deformation,the theory of influence function method was adopted.By using simulation program,the influence of these factors on deformation was obtained.Then a simple model can be built.With this model,it is convenient to analyze the influence of different factors on gaugemeter equation.
文摘The necessity for understanding normal human cognitive processes and behavior, and themechanisrns which result in dysfunction in these processes are dependant on utilization of a suitable animal model. In order to develop pharmaceutical agents to alleviate mental disturbances and enable the individual to cope within the norms of society, it is incumbent upon investigators to choose a species in which pharmacokinetic principles are established and resemble those of hurnans. The choice of rats in cognition research studies has specific advantages in that these anirnals possess similar pharrnacodynamic parameters to hurnans. Further advantages include availability, low cost, ease of breeding, maintenance and an extensive literature database which enable comparisons to present findings. However, there are substantial differences in the perforrnance of various rat strains in tasks of learning, memory, attention, and responses to stress or drugs. In addition to rat strain, quantity of thed also exerts profound consequences on animal behavior. The aim of this review is to demonstrate that there are differences in the central nervous systern responsivencess of rat strains to chemicals and these could be related to factors such as source of supplier, type and quantity of feed, or season of the year. It is also evident that the genotype differs amongst strains and this may be responsible for the observed differences in CNS sensitivity to chemicals. Strain differences must be identified and taken into consideration in interpretation of assessrnent of neurobehavioural functions. It is also incumbent upon the investigators to utilize healthy (diet-controlled) animal models.
文摘A conservative transport operator in space (v//,r) and moment equations are used to describe the combined effects of a stochastic magnetic field and a radial ambipolar electric field on the electrons. The transport operator is coupled with Fokker-planck and Ohmic heating terms to compute the electron distribution function. A physical picture exhibits the possible importance of the turbulent magnetic field on the suprathermal electrons, which may be concerned with plasma confinement.
文摘Objective To investigate hidden blood loss after various types of intertrochanteric fractures and to determine whether oral iron supplementations is benefical for the postoperative functional recovery in elderly patients.Methods From
文摘We study the dynamics of a quantum dissipative system. Besides its linear coupling with a harmonic bath modelling the dissipation, we suppose that it is coupled with an oscillator with an interaction of the form s 2 x 2 . In our study, we integrate over the bath and the oscillator, extract the corresponding influence functionals and then solve the system’s sign problem. We apply the theory to the case of a double well and study the time evolution of the expectation value of the position.
基金Item Sponsored by National Natural Science Foundation of China (50534020)
文摘The strip flatness and crown control model is the foundation of automatic strip shape control. Considering the metal transverse flows and the inter stand second deformation, the trip flatness and crown control model has been developed, which can be applied to CVC mills and PC mills as well as normal four-high mills. The strip flatness and crown control model has high precision, and has been successfully applied to the automatic strip shape control system reconstruction of Tangshan Ganglu 1 250 mm hot strip plant.
基金Item Sponsored by National Natural Science Foundation of China(50534020)
文摘In flatness measuring system, the flatness measuring signal can be affected by the deflection of flatness measuring roll. The stress on flatness measuring roll was analyzed and a deflection model for the flatness measuring roll was obtained by using the influence function method. The model was developed on the basis of the deformation of flatness measuring roll in roiling process and compensation curve was obtained. The results indicated that the set curve of flatness is in good agreement with the online measured curve of flatness, and good strip flatness can be obtained.
文摘The calculation error of the gauge-meter model will affect the gap setting precision and the self-learn precision of rolling force. The precision of the gauge-meter model is strongly influenced by plate width, working roll radius, backup roll radius, working roll crown, backup roll crown, and rolling force. The influence rules are hard to get by measuring. Taking a conventional 4-h plate mill as the research subject, these influences were transferred into the calculation of roll deflection and flattening deformation. To calculate these deformations, the theory of the influence function method was adopted. By modifying the traditional gauge-meter model, a novel model of the effect of roll elastic deformation on the gap setting was built by data fitting. By this model, it was convenient to analyze the variation caused by the rolling condition. Combining the elastic deformation model of rolls with the kiss-rolls method, a gauge-meter model was put forward for plate thickness prediction. The prediction precision of thickness was greatly improved by the new gauge- meter model.
文摘Coal and ore underground mining generates subsidence and deformation of the land surface. Those defor- mations may cause damage to buildings and infrastructures. The environmental impact of subsidence will not be accepted in the future by the society in many countries. Especially acceptance of the ground deformations decreases every year there, where the mining regions are densely urbanized, the The only solution is to limit the subsidence or its impact on the infrastructure. The first is not rentable for the mining industry, the second depends on the precise subsidence prediction and good preventing management involved in the mining areas. The precision of the subsidence prediction depends strictly on the mathematical model of the deformation phenomenon and on the uncertainty of the input data. The subsidence prediction in the geological conditions of the raw materials used to be made on the basis of numerical modeling or the stochastic models. A modified solution of the stochastic model by Knothe will be presented in the paper. The author focuses on the precise description of the deposit shape and on the time dependent displacements of the rock mass. A two parameters＇ time function has been introduced in the algorithm.
基金supported by the National Natural Science Foundation of China(Grant No.51175103)Self-Planned Task of State Key Laboratory of Robotics and System(HIT)(Grant No.SKLRS201301B)
文摘Optical membrane mirrors are promising key components for future space telescopes. Due to their ultra-thin and high flexible properties, the surfaces of these membrane mirrors are susceptible to temperature variations. Therefore adaptive shape control of the mirror is essential to maintain the surface precision and to ensure its working performance. However, researches on modeling and control of membrane mirrors under thermal loads are sparse in open literatures. A 0.2 m diameter scale model of a polyimide membrane mirror is developed in this study. Three Polyvinylidene fluoride(PVDF) patches are laminated on the non-reflective side of the membrane mirror to serve as in-plane actuators. A new mathematical model of the piezoelectric actuated membrane mirror in multiple fields,(i.e., thermal,mechanical, and electrical field) is established, with which dynamic and static behaviors of the mirror can be analyzed.A closed-loop membrane mirror shape control system is set up and a surface shape control method based on an influence function matrix of the mirror is then investigated. Several experiments including surface displacement tracking and thermal deformation alleviation are performed. The deviations range from 15 μm to 20 μm are eliminated within 0.1 s and the residual deformation is controlled to micron level, which demonstrates the effectiveness of the proposed membrane shape control strategy and shows a satisfactory real-time performance. The proposed research provides a technological support and instruction for shape control of optical membrane mirrors.
文摘This paper presents a formulation for solving three-dimensional moving punch problem. It proves that Galin's theorem holds for the punch. As an example, the study offers some results (including numerical data) of dynamic displacement over an ellipse contact region.
基金This work was financially supported by the National Natural Science Foundation of China （51674028）, and Fundamental Research Funds for the Central Universities （FRF-IC- 16-001）.
文摘The method to predict roll deformation precisely and efficiently is vital for the strip shape control of a six-high rolling mill. Traditional calculation methods of roll deformation, such as the finite element method and the influence function method, have been widely used due to their accuracies. However, the required calculation time is too long to be applied to the realtime control. Therefore, a rapid calculation method for predicting roll deformation of a six-high rolling mill was proposed, which employed the finite difference method to calculate the roll deflection and used a polynomial to describe the nonlinear relationship between roll flattening and roll contact pressure. Furthermore, a new correction strategy was proposed in the iteration, where the roll center flattening and the roll flattening deviation were put forward and corrected simultaneously in the iteration process according to the static equilibrium of roll. Finally, by the comparison with traditional methods, the proposed method was proved to be more efficient and it was suitable for the online calculation of the strip shape control.
基金Project(2013CB632305)supported by the National Basic Research Program of ChinaProject(51375108)supported by the National Natural Science Foundation of China
文摘A line contact model of elastic coated solids is presented based on the influence coefficients(ICs) of surface displacement and stresses of coating-substrate system and the traditional contact model. The ICs of displacement and stresses are obtained from their corresponding frequency response functions(FRF) by using a conversion method based on fast Fourier transformation(FFT). The contact pressure and the stress field in the subsurface are obtained by employing conjugate gradient method(CGM) and discrete convolution fast Fourier transformation(DC-FFT). Comparison of the contact pressure and subsurface stresses obtained by the numerical method with the exact analytical solutions for Hertz contact is conducted, and the results show that the numerical solution has a very high accuracy and verify the validity of the contact model. The effect of the stiffness and thickness of coatings is further numerically studied. The result shows that the effects on contact pressure and contact width are opposite for hard and soft coatings and are intensified with the increase of coating thickness; the locations of crack initiation and propagation are different for soft and hard coatings; the risk of cracks and delaminations of coatings can be brought down by improving the lubrication condition or optimizing the non-dimensional parameter h/bh. This research offers a tool to numerically analyze the problem of elastic coated solids in line contact and make the blindness and randomness of trial-type coating design less.
文摘Accurate expression for photoabsorption (photoionization) cross sections of high density system proposed recently is used to study the photoionization of solid gold. The results show that the present theoretical photoianization cross sections have good agreement both in structure and in magnitude with the experimental results of gold crystal. The studies also indicate that both the real part epsilon' and the imaginary part epsilon' of the complex dielectric constant epsilon and the dielectric influence function of a nonideal system have rich structures in low energy side with a range about 50 eV, and suggest that the influence of particle interactions of surrounding particles with the photoionized particle on the photoionization cross sections can be easily investigated using the dielectric influence function. The electron overlap effects are suggested to be implemented in the future studies to improve the accuracy of theoretical photoionization cross sections of a solid system.
