The inflection point is an important feature of sigmoidal height-diameter(H-D)models.It is often cited as one of the properties favoring sigmoidal model forms.However,there are very few studies analyzing the inflectio...The inflection point is an important feature of sigmoidal height-diameter(H-D)models.It is often cited as one of the properties favoring sigmoidal model forms.However,there are very few studies analyzing the inflection points of H-D models.The goals of this study were to theoretically and empirically examine the behaviors of inflection points of six common H-D models with a regional dataset.The six models were the Wykoff(WYK),Schumacher(SCH),Curtis(CUR),HossfeldⅣ(HOS),von Bertalanffy-Richards(VBR),and Gompertz(GPZ)models.The models were first fitted in their base forms with tree species as random effects and were then expanded to include functional traits and spatial distribution.The distributions of the estimated inflection points were similar between the two-parameter models WYK,SCH,and CUR,but were different between the threeparameter models HOS,VBR,and GPZ.GPZ produced some of the largest inflection points.HOS and VBR produced concave H-D curves without inflection points for 12.7%and 39.7%of the tree species.Evergreen species or decreasing shade tolerance resulted in larger inflection points.The trends in the estimated inflection points of HOS and VBR were entirely opposite across the landscape.Furthermore,HOS could produce concave H-D curves for portions of the landscape.Based on the studied behaviors,the choice between two-parameter models may not matter.We recommend comparing seve ral three-parameter model forms for consistency in estimated inflection points before deciding on one.Believing sigmoidal models to have inflection points does not necessarily mean that they will produce fitted curves with one.Our study highlights the need to integrate analysis of inflection points into modeling H-D relationships.展开更多
Constraints from P-T pseudosections （MnNCKFMASH system）, foliation intersection/ inflection axes preserved in porphyroblasts （FIAs）, mineral assemblages and textural relationships for rocks containing all three Al...Constraints from P-T pseudosections （MnNCKFMASH system）, foliation intersection/ inflection axes preserved in porphyroblasts （FIAs）, mineral assemblages and textural relationships for rocks containing all three Al2 SiO5 polymorphs indicate a kyanite→ andalusite→ sillimanite sequential formation at different times rather than stable coexistence at the Al2SiO5 triple point. All three Al2SiO5 polymorphs grew in the Chl, Bt, Ms, Grt, St, Pl and Crd bearing Ordovician Clayhole Schist in Balcooma, northeastern Australia separately along a looped P-T-t-D path that swaps from clockwise to anticlockwise in the tectono-metamorphic history of the region. Kyanite grew during crustal thickening in an Early Silurian Orogenic event followed by decompression/heating, andalusite and fibrolitic sillimanite growth during Early Devonian exhumation.展开更多
FIAs have been used extensively for more than a decade to unravel deformation and metamorphic puzzles. Orogenic processes developing early during the history or orogenesis challenge scientists because compositional la...FIAs have been used extensively for more than a decade to unravel deformation and metamorphic puzzles. Orogenic processes developing early during the history or orogenesis challenge scientists because compositional layering in rocks always reactivates where multiple deformations have occurred, leaving little evidence of the history of foliation development preserved in the matrix. The foothills of the Rocky Mountains in Colorado, USA contain a succession of four FIA sets （trends） that would not have been distinguishable if porphyroblasts had not grown during the multiple deformation events that affected these rocks or if they had rotated as these events took place. They reveal that both the partitioning of deformation and the location of isograds changed significantly as the deformation proceeded.展开更多
Weld seam inflection points are inevitable in tele-teaching process on many welding occasions. The inflection points identified accurately is one of the prerequisites of ensuring tele-teaching precision. On the basis ...Weld seam inflection points are inevitable in tele-teaching process on many welding occasions. The inflection points identified accurately is one of the prerequisites of ensuring tele-teaching precision. On the basis of the inflection point characters, the concept of inflection point direction coefficient is proposed, the human-simulation intelligent control model of inflection point is established. The algorithms above, the inflection point identifying of box workpiece can be well performed. The experimental results show that the identifying average error of inflection point can be reduced to less than O. 5 mm by using optimal treatment of robot off-line programming system. The identifying control can automatically identify weld seam inflection points which can meet tele-teaching requirements.展开更多
In this paper, rock mass is regarded as anisotropic clastic units and the partial differential equation of subsidence has been testified. The solution about homogeneous anisotropy has been obtained. The existence of i...In this paper, rock mass is regarded as anisotropic clastic units and the partial differential equation of subsidence has been testified. The solution about homogeneous anisotropy has been obtained. The existence of inflection point offset in subsidence formula has been proved. Lastly, the relevant influence factors about the offset of inflection point have been simply discussed.展开更多
On January 8,Shanghai International Shipping Research Center(SISRC)released China Shipping Prosperity Report for Q4 2024.According to the report,in the fourth quarter of 2024,CSPI was 115.73 points,up 3.49 points quar...On January 8,Shanghai International Shipping Research Center(SISRC)released China Shipping Prosperity Report for Q4 2024.According to the report,in the fourth quarter of 2024,CSPI was 115.73 points,up 3.49 points quarter on quarter,maintaining the relative prosperity range;CSFI was 129.28 points,up 16.12 points QOQ,rising from the relative prosperity range 1o the fairly prosperous range,and all business confidence indexes rose to varying degrees.Overall,the shipping industry heat increased in Q4 2024 QOQ.展开更多
Using vectors between control points(a_i=P_(i+1)-P_i),parameters λ and μ(such that a_(i+1)=λ_(ai+μ_(a_i+2))are used to study the shape classification of planar parametric cubic B-spline curves. The regiosn of λμ...Using vectors between control points(a_i=P_(i+1)-P_i),parameters λ and μ(such that a_(i+1)=λ_(ai+μ_(a_i+2))are used to study the shape classification of planar parametric cubic B-spline curves. The regiosn of λμ space corresponding to different geometric features on the curves are investigated.These results are useful for curve design.展开更多
Shandong Development and Reform Commission recently announced in a documen that based on the enterprise self-inspection and provincial inspection results,it had ordered Shandong Weiqiao Pioneering Group and Xinfa Grou...Shandong Development and Reform Commission recently announced in a documen that based on the enterprise self-inspection and provincial inspection results,it had ordered Shandong Weiqiao Pioneering Group and Xinfa Group to close 3.21 million tons o illegal aluminum production capacity by the end of July.Besides Shandong,other provinces and regions with high aluminum展开更多
A rational parametric planar cubic H spline curve is defined by a set of control vertices in a plane and percentage factors of line segments between every two control vertices. Movement of any control vertex affects ...A rational parametric planar cubic H spline curve is defined by a set of control vertices in a plane and percentage factors of line segments between every two control vertices. Movement of any control vertex affects three curve segments. This paper is the succession and development of reference of Tang Yuehong. We analyze the geometric features like cusps and inflection points in the curve and calculate the cusps and inflection points, then give a necessary and sufficient condition to the inflection points in the curve when it is non degenerative, and finally show that the curves have no cusps in the interval (0,1). In many applications, it is desirable to analyze the parametric curves for undesirable features like cusps and inflection points展开更多
This paper examines the acquisition of subject-verb agreement inflections in the natural speech corpus of two mono-lingual children speaking Yemeni Ibbi Arabic(YIA)between 2 and 3 years old.The two children are Ibrahi...This paper examines the acquisition of subject-verb agreement inflections in the natural speech corpus of two mono-lingual children speaking Yemeni Ibbi Arabic(YIA)between 2 and 3 years old.The two children are Ibrahim and Wala(between the age of 2;1 and 2;10)with Mean Lenghth of Utterance(MLU)range of 2.72 to 3.23 for Ibrahim and 2.9 to 3.27 for Wala.YIA,as a variety of Arabic,has rich and complex morphological system with a fusional type.Verbs are inflected with tense and agreement.Each verbal inflection is marked for person,number,and gender agreement.However,this paper attempts to explore how agreement forms are acquired by YIA-speaking children and examines when YIA children distinguish between first,second,and third person agreement,singular and plural,masculine and feminine agreement forms.The paper argues that agreement inflections(person,number,gender)are available to children early,thereby supporting the Strong Continuity Hypothesis(Lust,1999).Moreover,the results give evidence to Wexler’s Hypothesis(1998),Very Early Knowledge of Inflection(VEKI),which says that children know the grammatical and phonological properties of inflections in a language in the earliest stages when they enter the two-word stage.Similarly,this study tests Hoekstra and Hyams’(1995)Early Morpho-syntactic Convergence(EMC)which proposed that children acquire the specifics of inflections of the target language at an early stage.展开更多
Five lengthy periods involving multiple phases of cordierite and andalusite growth were revealed by detailed studies of foliation inflection/intersection axes （FIA） preserved in porphyroblasts in schists from the Ar...Five lengthy periods involving multiple phases of cordierite and andalusite growth were revealed by detailed studies of foliation inflection/intersection axes （FIA） preserved in porphyroblasts in schists from the Arkansas River region in Colorado, USA. The regionally consistent character of the succession of five different FIA trends enabled the relative timing of each FIA with respect to the next to be determined. The FIA succession from first to last is： FIA 1 trending W-E, FIA 2 trending SSW- NNE, FIA 3 trending NNW-SSE, FIA 4 trending NW-SE and FIA 5 trending SW-NE. For four of the FIA sets, samples were found containing monazite grains preserved as inclusions. These were dated on an electron microprobe. The ages obtained concur exactly with the FIA succession, with FIA 1 at 1506±15 Ma, FIA 2 at 1467±23 Ma, FIA 3 at 1425±18 Ma, FIA 4 not dated and FIA 5 at 1366±20 Ma. These ages are directly reflected in a succession of plutons in the surrounding region dated by other isotopic approaches, suggesting that deformation, metamorphism and pluton emplacement occurred together episodically, but effectively continuously, for some 140 Ma.展开更多
Studying the depth-diameter relationship of impact craters around the Oceanus Procellarum area together with values for simple crater,complex crater and basin confirms two inflections in the depth/diameter （d/D） cur...Studying the depth-diameter relationship of impact craters around the Oceanus Procellarum area together with values for simple crater,complex crater and basin confirms two inflections in the depth/diameter （d/D） curve.We classify impact craters to three types,which are simple crater,complex crater and basin.Using the most ＇pristine＇ or deepest craters in the data,three kinds of depth-diameter relationships are determined：the linear fit for simple crater is d=0.126D＋0.490 2;the best empirical power fit for complex crater is d=0.327 3D0.625 2;the best empirical power fit for basin is d=0.300 4D0.463 3,where d is the depth of the crater and D is the diameter of the crater,both in kilometers.The depth-diameter relationship for basin is characterized by a lower slope than that for complex craters,demonstrating that this morphologic transition corresponds to a further decrease in the depth of an impact structure relative to its diameter with increasing size.These relationships can then be used to estimate the theoretical depth of any impact radius,and therefore can be used to estimate the pristine shape of the crater around the Oceanus Procellarum area.The study of Oceanus Procellarum will help humankind to learn more about the origin and evolution of the moon.展开更多
A succession of 5 FIA trends（foliation intersection or inflection axes in porphyroblasts） preserved in high temperature-low pressure regime PreCambrian rocks in the Texas Creek, Arkansas River region reflected by th...A succession of 5 FIA trends（foliation intersection or inflection axes in porphyroblasts） preserved in high temperature-low pressure regime PreCambrian rocks in the Texas Creek, Arkansas River region reflected by the fold axial plane traces and schistosity data in this region. Similar fold axial plane trace data measured in Palaeozoic rocks in Chester Dome, Vermont, which is high temperature to medium pressure regime, only preserve the effects of the youngest FIAs of the all 5 FIA sets that obtained in this region. The other three FIA sets have no equivalent fold axial planes. This difference from shallow to deeper orogenic regimes reflects decreasing competency at greater pressure with collapse and unfolding of earlier formed folds. The greater overlying load of rocks has tended to flatten all but the very largest early-formed structures, preserving only those folds that were more recently developed.展开更多
Concentrations of Polychlorinated dibenzo-p-dioxins and dibenzofurans（PCDD/Fs） and polychlorinated biphenyls（PCBs） in soil samples from Tibetan Plateau were determined. The average concentration of total 2,3,7,8-P...Concentrations of Polychlorinated dibenzo-p-dioxins and dibenzofurans（PCDD/Fs） and polychlorinated biphenyls（PCBs） in soil samples from Tibetan Plateau were determined. The average concentration of total 2,3,7,8-PCDD/Fs was（2.30 ± 1.02） pg/g, and World Health Organization Toxicity Equivalency（WHO-TEQ） average concentration was（0.013 ± 0.010）pg WHO-TEQ/g. The average concentration of ∑PCBs（7 indicator PCB and 12 dioxin like-PCB congeners） was（16.2 ± 9.25） pg/g, and WHO-TEQ average concentration was 0.043 ±0.049 pg WHO-TEQ/g. Comparing to previous studies in similar environmental conditions,PCDD/Fs and PCBs in this study showed a relatively lower concentration. The altitude dependences of PCDD/Fs and PCBs were also studied. Total organic carbon（TOC） normalized concentrations presented a quadratic relation with the altitudes, and an inflection could be found on the parabola of the total concentrations and some congeners of high concentration.The concentrations decreased with altitudes below about 4500 m above sea level（a.s.l.）, while they increased with altitudes above it. These phenomena indicate that cold condensation of PCDD/Fs and PCBs would happen above 4500 m a.s.l, on the Tibetan Plateau.展开更多
In this paper, the problem of magnetic source shape determination is simplified into iterative inversion after symbol recognition. Based on the theory of differentiating different forms of magnetic sources by integral...In this paper, the problem of magnetic source shape determination is simplified into iterative inversion after symbol recognition. Based on the theory of differentiating different forms of magnetic sources by integral magnetic anomaly curves, a unified expression for calculating magnetic fields of different magnetic sources under undulating terrain conditions is given, and the triangular system plate interpretation method is used to identify the magnetic fields of different magnetic sources. The calculus parameter basis for the classification of unknown magnetic source morphology and the method technology for determining the magnetic source spatial morphology are confirmed. The example shows that the application of the calculus triangulation method to the magnetic source morphological system inversion has a good prospect.展开更多
It is illustrated that there exists an inflection circle on the linkage rigid body by the principle of relative motion. Confirmed methods of the inflection circle, curvature radius and curvature center of the point tr...It is illustrated that there exists an inflection circle on the linkage rigid body by the principle of relative motion. Confirmed methods of the inflection circle, curvature radius and curvature center of the point track on the linkage rigid body are given in the case of the different contact type of move instantaneous center line and static instantaneous center line. The regularity of distribution of curvature radius and curvature center of the point track is researched. The identification methods called determination parameters and auxiliary vertical line of the diameter and direction of the inflection circle in the four bar mechanism are pointed out. A design method of the crane hoisting mechanism is discussed in the end of this paper.展开更多
The Finnish language is a member of the Finno-Ugrian language family, which is a part of the Uralian languages. Finnish is mainly spoken by five million people. Finnish language is a unique language compared to other ...The Finnish language is a member of the Finno-Ugrian language family, which is a part of the Uralian languages. Finnish is mainly spoken by five million people. Finnish language is a unique language compared to other European language. It has fifteen different cases, and the inflections occur to many aspects of Finnish grammar. And the free word order is also one of features of Finnish language. The essay focuses on the characteristics of Finnish language in the perspective of inflections and word order.展开更多
With the realization that rocks with a schistosity parallel to bedding(S0 parallel S1)have undergone lengthy histories of deformation that predate the obvious first deformation(e.g.Bell et al.,2003; Sayab,2006;Yeh,200...With the realization that rocks with a schistosity parallel to bedding(S0 parallel S1)have undergone lengthy histories of deformation that predate the obvious first deformation(e.g.Bell et al.,2003; Sayab,2006;Yeh,2007)came recognition that large scale regional folds can form early during this process and be preserved throughout orogenesis(e.g.,Ham & Bell,2004;Bell & Newman,2006).This history is lost within the matrix because of reactivational shear展开更多
A spectrophotometric technique is developed to simultaneously quantify nitrate and nitrite in plasma treated water.The measurement is based on examining the inflection points(wavelengths)in the derivative absorbance o...A spectrophotometric technique is developed to simultaneously quantify nitrate and nitrite in plasma treated water.The measurement is based on examining the inflection points(wavelengths)in the derivative absorbance of the nitrate or nitrite solution.At the inflection points of the pure nitrate solution,the derivative absorbance is zero and independent of the nitrate’s concentration,and thus the nitrite’s concentration in a mixed nitrate and nitrite solution can be obtained by using the Beer’s law at these points.The nitrate’s concentration can also be achieved from the inflection points of nitrite in the same manner.The relation between the tested substance’s(nitrate or nitrite)concentration and the second-or the third-order absorbances is obtained at these inflection points.Test measurements for mixed aqueous solutions of nitrate and nitrite with or without hydrogen peroxide confirm the reliability of this technique.We applied this technique to quantify the nitrate and nitrite generated in air plasma treated aqueous solutions.The results indicate that both nitrate and nitrite concentrations increase with the plasma treatment time,and the nitrite species is found to be generated prior to the nitrate species in the air plasma treated aqueous solution.Moreover,the production rate of total nitrogen species is independent of the solutions’p H value.These results are relevant to diverse applications of plasma activated solutions in materials processing,biotechnology,medicine and other fields.展开更多
文摘The inflection point is an important feature of sigmoidal height-diameter(H-D)models.It is often cited as one of the properties favoring sigmoidal model forms.However,there are very few studies analyzing the inflection points of H-D models.The goals of this study were to theoretically and empirically examine the behaviors of inflection points of six common H-D models with a regional dataset.The six models were the Wykoff(WYK),Schumacher(SCH),Curtis(CUR),HossfeldⅣ(HOS),von Bertalanffy-Richards(VBR),and Gompertz(GPZ)models.The models were first fitted in their base forms with tree species as random effects and were then expanded to include functional traits and spatial distribution.The distributions of the estimated inflection points were similar between the two-parameter models WYK,SCH,and CUR,but were different between the threeparameter models HOS,VBR,and GPZ.GPZ produced some of the largest inflection points.HOS and VBR produced concave H-D curves without inflection points for 12.7%and 39.7%of the tree species.Evergreen species or decreasing shade tolerance resulted in larger inflection points.The trends in the estimated inflection points of HOS and VBR were entirely opposite across the landscape.Furthermore,HOS could produce concave H-D curves for portions of the landscape.Based on the studied behaviors,the choice between two-parameter models may not matter.We recommend comparing seve ral three-parameter model forms for consistency in estimated inflection points before deciding on one.Believing sigmoidal models to have inflection points does not necessarily mean that they will produce fitted curves with one.Our study highlights the need to integrate analysis of inflection points into modeling H-D relationships.
文摘Constraints from P-T pseudosections （MnNCKFMASH system）, foliation intersection/ inflection axes preserved in porphyroblasts （FIAs）, mineral assemblages and textural relationships for rocks containing all three Al2 SiO5 polymorphs indicate a kyanite→ andalusite→ sillimanite sequential formation at different times rather than stable coexistence at the Al2SiO5 triple point. All three Al2SiO5 polymorphs grew in the Chl, Bt, Ms, Grt, St, Pl and Crd bearing Ordovician Clayhole Schist in Balcooma, northeastern Australia separately along a looped P-T-t-D path that swaps from clockwise to anticlockwise in the tectono-metamorphic history of the region. Kyanite grew during crustal thickening in an Early Silurian Orogenic event followed by decompression/heating, andalusite and fibrolitic sillimanite growth during Early Devonian exhumation.
文摘FIAs have been used extensively for more than a decade to unravel deformation and metamorphic puzzles. Orogenic processes developing early during the history or orogenesis challenge scientists because compositional layering in rocks always reactivates where multiple deformations have occurred, leaving little evidence of the history of foliation development preserved in the matrix. The foothills of the Rocky Mountains in Colorado, USA contain a succession of four FIA sets （trends） that would not have been distinguishable if porphyroblasts had not grown during the multiple deformation events that affected these rocks or if they had rotated as these events took place. They reveal that both the partitioning of deformation and the location of isograds changed significantly as the deformation proceeded.
文摘Weld seam inflection points are inevitable in tele-teaching process on many welding occasions. The inflection points identified accurately is one of the prerequisites of ensuring tele-teaching precision. On the basis of the inflection point characters, the concept of inflection point direction coefficient is proposed, the human-simulation intelligent control model of inflection point is established. The algorithms above, the inflection point identifying of box workpiece can be well performed. The experimental results show that the identifying average error of inflection point can be reduced to less than O. 5 mm by using optimal treatment of robot off-line programming system. The identifying control can automatically identify weld seam inflection points which can meet tele-teaching requirements.
文摘In this paper, rock mass is regarded as anisotropic clastic units and the partial differential equation of subsidence has been testified. The solution about homogeneous anisotropy has been obtained. The existence of inflection point offset in subsidence formula has been proved. Lastly, the relevant influence factors about the offset of inflection point have been simply discussed.
文摘On January 8,Shanghai International Shipping Research Center(SISRC)released China Shipping Prosperity Report for Q4 2024.According to the report,in the fourth quarter of 2024,CSPI was 115.73 points,up 3.49 points quarter on quarter,maintaining the relative prosperity range;CSFI was 129.28 points,up 16.12 points QOQ,rising from the relative prosperity range 1o the fairly prosperous range,and all business confidence indexes rose to varying degrees.Overall,the shipping industry heat increased in Q4 2024 QOQ.
文摘Using vectors between control points(a_i=P_(i+1)-P_i),parameters λ and μ(such that a_(i+1)=λ_(ai+μ_(a_i+2))are used to study the shape classification of planar parametric cubic B-spline curves. The regiosn of λμ space corresponding to different geometric features on the curves are investigated.These results are useful for curve design.
文摘Shandong Development and Reform Commission recently announced in a documen that based on the enterprise self-inspection and provincial inspection results,it had ordered Shandong Weiqiao Pioneering Group and Xinfa Group to close 3.21 million tons o illegal aluminum production capacity by the end of July.Besides Shandong,other provinces and regions with high aluminum
文摘A rational parametric planar cubic H spline curve is defined by a set of control vertices in a plane and percentage factors of line segments between every two control vertices. Movement of any control vertex affects three curve segments. This paper is the succession and development of reference of Tang Yuehong. We analyze the geometric features like cusps and inflection points in the curve and calculate the cusps and inflection points, then give a necessary and sufficient condition to the inflection points in the curve when it is non degenerative, and finally show that the curves have no cusps in the interval (0,1). In many applications, it is desirable to analyze the parametric curves for undesirable features like cusps and inflection points
文摘This paper examines the acquisition of subject-verb agreement inflections in the natural speech corpus of two mono-lingual children speaking Yemeni Ibbi Arabic(YIA)between 2 and 3 years old.The two children are Ibrahim and Wala(between the age of 2;1 and 2;10)with Mean Lenghth of Utterance(MLU)range of 2.72 to 3.23 for Ibrahim and 2.9 to 3.27 for Wala.YIA,as a variety of Arabic,has rich and complex morphological system with a fusional type.Verbs are inflected with tense and agreement.Each verbal inflection is marked for person,number,and gender agreement.However,this paper attempts to explore how agreement forms are acquired by YIA-speaking children and examines when YIA children distinguish between first,second,and third person agreement,singular and plural,masculine and feminine agreement forms.The paper argues that agreement inflections(person,number,gender)are available to children early,thereby supporting the Strong Continuity Hypothesis(Lust,1999).Moreover,the results give evidence to Wexler’s Hypothesis(1998),Very Early Knowledge of Inflection(VEKI),which says that children know the grammatical and phonological properties of inflections in a language in the earliest stages when they enter the two-word stage.Similarly,this study tests Hoekstra and Hyams’(1995)Early Morpho-syntactic Convergence(EMC)which proposed that children acquire the specifics of inflections of the target language at an early stage.
文摘Five lengthy periods involving multiple phases of cordierite and andalusite growth were revealed by detailed studies of foliation inflection/intersection axes （FIA） preserved in porphyroblasts in schists from the Arkansas River region in Colorado, USA. The regionally consistent character of the succession of five different FIA trends enabled the relative timing of each FIA with respect to the next to be determined. The FIA succession from first to last is： FIA 1 trending W-E, FIA 2 trending SSW- NNE, FIA 3 trending NNW-SSE, FIA 4 trending NW-SE and FIA 5 trending SW-NE. For four of the FIA sets, samples were found containing monazite grains preserved as inclusions. These were dated on an electron microprobe. The ages obtained concur exactly with the FIA succession, with FIA 1 at 1506±15 Ma, FIA 2 at 1467±23 Ma, FIA 3 at 1425±18 Ma, FIA 4 not dated and FIA 5 at 1366±20 Ma. These ages are directly reflected in a succession of plutons in the surrounding region dated by other isotopic approaches, suggesting that deformation, metamorphism and pluton emplacement occurred together episodically, but effectively continuously, for some 140 Ma.
基金supported by the 863 Key Project (No. 2004AA735020)the Chang’e Data Special Funding
文摘Studying the depth-diameter relationship of impact craters around the Oceanus Procellarum area together with values for simple crater,complex crater and basin confirms two inflections in the depth/diameter （d/D） curve.We classify impact craters to three types,which are simple crater,complex crater and basin.Using the most ＇pristine＇ or deepest craters in the data,three kinds of depth-diameter relationships are determined：the linear fit for simple crater is d=0.126D＋0.490 2;the best empirical power fit for complex crater is d=0.327 3D0.625 2;the best empirical power fit for basin is d=0.300 4D0.463 3,where d is the depth of the crater and D is the diameter of the crater,both in kilometers.The depth-diameter relationship for basin is characterized by a lower slope than that for complex craters,demonstrating that this morphologic transition corresponds to a further decrease in the depth of an impact structure relative to its diameter with increasing size.These relationships can then be used to estimate the theoretical depth of any impact radius,and therefore can be used to estimate the pristine shape of the crater around the Oceanus Procellarum area.The study of Oceanus Procellarum will help humankind to learn more about the origin and evolution of the moon.
基金supported in part by grants from National Natural Science Foundation of China (41202153)China Council Scholarship (2013693)+1 种基金MLR, China (201211093)Institute of Geology, CAGS (J1101)
文摘A succession of 5 FIA trends（foliation intersection or inflection axes in porphyroblasts） preserved in high temperature-low pressure regime PreCambrian rocks in the Texas Creek, Arkansas River region reflected by the fold axial plane traces and schistosity data in this region. Similar fold axial plane trace data measured in Palaeozoic rocks in Chester Dome, Vermont, which is high temperature to medium pressure regime, only preserve the effects of the youngest FIAs of the all 5 FIA sets that obtained in this region. The other three FIA sets have no equivalent fold axial planes. This difference from shallow to deeper orogenic regimes reflects decreasing competency at greater pressure with collapse and unfolding of earlier formed folds. The greater overlying load of rocks has tended to flatten all but the very largest early-formed structures, preserving only those folds that were more recently developed.
基金supported by the National Basic Research Program (973) of China (No. 2011CB201500)the Environmental Public Welfare Projects (No. 201209019)+1 种基金the National High Technology Research and Development Program (863) of China (No. 2012AA062803)the National Natural Science Foundation of China (No. 21477150, 21321004)
文摘Concentrations of Polychlorinated dibenzo-p-dioxins and dibenzofurans（PCDD/Fs） and polychlorinated biphenyls（PCBs） in soil samples from Tibetan Plateau were determined. The average concentration of total 2,3,7,8-PCDD/Fs was（2.30 ± 1.02） pg/g, and World Health Organization Toxicity Equivalency（WHO-TEQ） average concentration was（0.013 ± 0.010）pg WHO-TEQ/g. The average concentration of ∑PCBs（7 indicator PCB and 12 dioxin like-PCB congeners） was（16.2 ± 9.25） pg/g, and WHO-TEQ average concentration was 0.043 ±0.049 pg WHO-TEQ/g. Comparing to previous studies in similar environmental conditions,PCDD/Fs and PCBs in this study showed a relatively lower concentration. The altitude dependences of PCDD/Fs and PCBs were also studied. Total organic carbon（TOC） normalized concentrations presented a quadratic relation with the altitudes, and an inflection could be found on the parabola of the total concentrations and some congeners of high concentration.The concentrations decreased with altitudes below about 4500 m above sea level（a.s.l.）, while they increased with altitudes above it. These phenomena indicate that cold condensation of PCDD/Fs and PCBs would happen above 4500 m a.s.l, on the Tibetan Plateau.
文摘In this paper, the problem of magnetic source shape determination is simplified into iterative inversion after symbol recognition. Based on the theory of differentiating different forms of magnetic sources by integral magnetic anomaly curves, a unified expression for calculating magnetic fields of different magnetic sources under undulating terrain conditions is given, and the triangular system plate interpretation method is used to identify the magnetic fields of different magnetic sources. The calculus parameter basis for the classification of unknown magnetic source morphology and the method technology for determining the magnetic source spatial morphology are confirmed. The example shows that the application of the calculus triangulation method to the magnetic source morphological system inversion has a good prospect.
文摘It is illustrated that there exists an inflection circle on the linkage rigid body by the principle of relative motion. Confirmed methods of the inflection circle, curvature radius and curvature center of the point track on the linkage rigid body are given in the case of the different contact type of move instantaneous center line and static instantaneous center line. The regularity of distribution of curvature radius and curvature center of the point track is researched. The identification methods called determination parameters and auxiliary vertical line of the diameter and direction of the inflection circle in the four bar mechanism are pointed out. A design method of the crane hoisting mechanism is discussed in the end of this paper.
文摘The Finnish language is a member of the Finno-Ugrian language family, which is a part of the Uralian languages. Finnish is mainly spoken by five million people. Finnish language is a unique language compared to other European language. It has fifteen different cases, and the inflections occur to many aspects of Finnish grammar. And the free word order is also one of features of Finnish language. The essay focuses on the characteristics of Finnish language in the perspective of inflections and word order.
文摘With the realization that rocks with a schistosity parallel to bedding(S0 parallel S1)have undergone lengthy histories of deformation that predate the obvious first deformation(e.g.Bell et al.,2003; Sayab,2006;Yeh,2007)came recognition that large scale regional folds can form early during this process and be preserved throughout orogenesis(e.g.,Ham & Bell,2004;Bell & Newman,2006).This history is lost within the matrix because of reactivational shear
基金National Natural Science Foundation of China(No.52077185)the Basic Research Program of Science and Technology of Shenzhen,China(No.JCYJ20190809162617137)for partial financial support。
文摘A spectrophotometric technique is developed to simultaneously quantify nitrate and nitrite in plasma treated water.The measurement is based on examining the inflection points(wavelengths)in the derivative absorbance of the nitrate or nitrite solution.At the inflection points of the pure nitrate solution,the derivative absorbance is zero and independent of the nitrate’s concentration,and thus the nitrite’s concentration in a mixed nitrate and nitrite solution can be obtained by using the Beer’s law at these points.The nitrate’s concentration can also be achieved from the inflection points of nitrite in the same manner.The relation between the tested substance’s(nitrate or nitrite)concentration and the second-or the third-order absorbances is obtained at these inflection points.Test measurements for mixed aqueous solutions of nitrate and nitrite with or without hydrogen peroxide confirm the reliability of this technique.We applied this technique to quantify the nitrate and nitrite generated in air plasma treated aqueous solutions.The results indicate that both nitrate and nitrite concentrations increase with the plasma treatment time,and the nitrite species is found to be generated prior to the nitrate species in the air plasma treated aqueous solution.Moreover,the production rate of total nitrogen species is independent of the solutions’p H value.These results are relevant to diverse applications of plasma activated solutions in materials processing,biotechnology,medicine and other fields.
