On the surfaces of celestial bodies with no or thin atmospheres,such as the Moon and Mars,the solar wind irradiation process leads to the formation of hydrogen and helium enriched regions in the extraterrestrial soil ...On the surfaces of celestial bodies with no or thin atmospheres,such as the Moon and Mars,the solar wind irradiation process leads to the formation of hydrogen and helium enriched regions in the extraterrestrial soil particles.However,soil particles on the Earth with the similar composition lack such structures and properties.This discrepancy raises a key question whether there is a direct relationship between solar wind irradiation and the alterations in the structure and chemical performance of extraterrestrial materials.To address this question,this work investigates the effects of proton irradiation,simulating solar wind radiation,on the structure and photothermal catalytic properties of the classic catalyst In_(2)O_(3).It reveals that proton irradiation induces structural features in In_(2)O_(3) analogous to those characteristics of solar wind weathering observed in extraterrestrial materials.Furthermore,after proton beam irradiation with an energy of 30 keV and a dose of 3×10^(17) protons·cm^(-2),the methanol production yield of the In_(2)O_(3) catalyst increased to 2.6 times of its preirradiation level,and the methanol selectivity improved to 2.1 times of the original value.This work provides both theoretical and experimental support for the development of high-efficiency,radiation-resistant photothermal catalysts.展开更多
The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)...The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2).展开更多
Negative permittivity has been widely studied in various metamaterials and percolating composites, of which the anomalous dielectric behavior was attributed to critical structural properties of building blocks.Herein,...Negative permittivity has been widely studied in various metamaterials and percolating composites, of which the anomalous dielectric behavior was attributed to critical structural properties of building blocks.Herein, mono-phase ceramics of indium tin oxides(ITO) were sintered for epsilon-negative materials in MHz-k Hz frequency regions. Electrical conductivity and complex permittivity were analyzed with DrudeLorentz oscillator model. Carriers’ characters were measured based on Hall effect and the magnitude and frequency dispersion of negative permittivity were mainly determined by carrier concentration.Temperature-dependent dielectric properties further proved the epsilon-negative behaviors were closely associated with free carriers’ collective responses. It’s found that negative permittivity of ITO ceramics was mainly caused by plasma oscillations of free carriers, while the dielectric loss was mainly attributed to conduction loss. Negative permittivity realized here was related to materials intrinsic nature and this work preliminarily determined the mechanism of negative permittivity in doped ceramics from the perspective of carriers.展开更多
Geometric, electronic and vibrational properties of the most stable and energetically favourable configurations of indium oxide clusters InmOn （1 ≤m, n ≤ 4） are investigated using density functional theory. The lo...Geometric, electronic and vibrational properties of the most stable and energetically favourable configurations of indium oxide clusters InmOn （1 ≤m, n ≤ 4） are investigated using density functional theory. The lowest energy geometries prefer the planar arrangement of the constituent atoms with a trend to maximize the number of ionic In-O bonds. Due to the charge transfer from In to O atoms, the electrostatic repulsion occurs between the atoms with the same kind of charge. The minimization of electrostatic repulsion and the maximization of In O bond number compete between each other and determine the location of the isometric total energy. The most stable linear In-O-In-O structure of In2O2 cluster is attributed to the reduced electrostatic repulsive energy at the expense of In-O bond number, while the lowest energy rhombus-like structure of In2O3 cluster reflects the maximized number of In O bonds. Furthermore, the vibrational frequencies of the lowest energy clusters are calculated and compared with the available experimental results. The energy gap and the charge density distribution for clusters with varying oxygen/indium ratio are also discussed.展开更多
Silver catalyst has been extensively investigated for photocatalytic and electrochemical CO_(2)reduction.However,its high activity for selective hydrogenation of CO_(2)to methanol has not been confirmed.Here,the feasi...Silver catalyst has been extensively investigated for photocatalytic and electrochemical CO_(2)reduction.However,its high activity for selective hydrogenation of CO_(2)to methanol has not been confirmed.Here,the feasibility of the indium oxide supported silver catalyst was investigated for CO_(2)hydrogenation to methanol by the density functional theoretical(DFT)study and then by the experimental investigation.The DFT study shows there exists an intense Ag-In_(2)O_(3)interaction,which causes silver to be positively charged.The positively charged Ag species changes the electronic structure of the metal,facilitates the formation of the Ag-In_(2)O_(3)interfacial site for activation and dissociation of carbon dioxide.The promoted CO_(2)dissociation leads to the enhanced methanol synthesis via the CO hydrogenation route as CO_(2)^(*)→CO^(*)→HCO^(*)→H_(2)CO^(*)→H_(3)CO^(*)→H_(3)COH^(*).The Ag/In_(2)O_(3)catalyst was then prepared using the deposition-precipitation method.The experimental study confirms the theoretical prediction.The methanol selectivity of CO_(2)hydrogenation on Ag/In_(2)O_(3)reaches 100.0%at reaction temperature of 200℃.It remains more than 70.0%between 200 and 275℃.At 300℃and 5 MPa,the methanol selectivity still keeps 58.2%with a CO_(2)conversion of 13.6%and a space-time yield(STY)of methanol of 0.453 g_(methanol)g_(cat)^(-1)h^(-1),which is the highest methanol STY ever reported for silver catalyst.The catalyst characterization confirms the intense Ag-In_(2)O_(3)interaction as well,which causes high Ag dispersion,increases and stabilizes the oxygen vacancies and creates the active Ag-In_(2)O_(3)interfacial site for the enhanced CO_(2)hydrogenation to methanol.展开更多
Infrared-transparent conductors have attracted considerable attention due to their potential applications in electromagnetic shielding,infrared sensors,and photovoltaic devices.However,most known materials face the cr...Infrared-transparent conductors have attracted considerable attention due to their potential applications in electromagnetic shielding,infrared sensors,and photovoltaic devices.However,most known materials face the critical challenge of balancing high infrared transmittance with high electrical conductivity across the broad infrared spectral band(2.5-25μm).While ultra-thin indium tin oxide(ITO)films have been demonstrated to exhibit superior infrared transmittance,their inherent low electrical conductivity necessitates additional enhancement strategies.This study systematically investigates the effects of oxygen vacancy concentration regulation and ultra-thin copper capping layer integration on the infrared optoelectronic properties of 20 nm-thick ITO films.A fundamental trade-off is revealed in ITO films that increased oxygen vacancy content enhances the electrical conductivity while compromising the infrared transmittance.Meanwhile,following the introduction of a Cu capping layer,the Cu/ITO system exhibits opposing dependencies of infrared transmittance and electrical conductivity on the capping layer thickness,with an optimum thickness of~3 nm.Finally,by constructing a Cu(3 nm)/ITO(20 nm)heterostructure with varying oxygen vacancy content,we demonstrate the combined effect of the ultra-thin Cu capping layer and moderate oxygen vacancy content on optimizing the carrier transport network.This configuration simultaneously minimizes surface/interfacial reflection and absorption losses,achieving high infrared transmittance(0.861)and a low sheet resistance of 400 W/sq.Our findings highlight the critical role of the combined effect of metal/oxide heterostructure design and defect engineering in optimizing infrared-transparent conductive properties.展开更多
Constructing structure-function relationships is critical for the rational design and development of efficient catalysts for CO_(2) electroreduction reaction(CO_(2)RR).In_(2)O_(3) is well-known for its specific abilit...Constructing structure-function relationships is critical for the rational design and development of efficient catalysts for CO_(2) electroreduction reaction(CO_(2)RR).In_(2)O_(3) is well-known for its specific ability to produce formic acid.However,how the crystal phase and surface affect the CO_(2)RR activity is still unclear,making it difficult to further improve the intrinsic activity and screen for the most active structure.In this work,cubic and hexagonal In_(2)O_(3) with different stable surfaces((111)and(110)for cubic,(120)and(104)for hexagonal)are investigated for CO_(2)RR.Theoretical results demonstrate that the adsorption of reactants on cubic In_(2)O_(3) is stronger than that on hexagonal In_(2)O_(3),with the cubic(111)surface being the most active for CO_(2)RR.In experiments,synthesized cubic In_(2)O_(3) nanosheets with predominantly exposed(111)surfaces exhibited a high HCOO^(-)Faradaic efficiency(87.5%)and HCOO^(–)current density(–16.7 mA cm^(-2))at–0.9 V vs RHE.In addition,an aqueous Zn-CO_(2) battery based on a cubic In2O3 cathode was assembled.Our work correlates the phases and surfaces with the CO_(2)RR activity,and provides a fundamental understanding of the structure-function relationship of In_(2)O_(3),thereby contributing to further improvements in its CO_(2)RR activity.Moreover,the results provide a principle for the directional preparation of materials with optimal phases and surfaces for efficient electrocatalysis.展开更多
Electrocatalytic carbon dioxide reduction reaction(CO_(2)RR)to formic acid is considered an economically viable avenue toward carbon neutrality.Indium-based catalysts have garnered considerable attention in CO_(2)RR o...Electrocatalytic carbon dioxide reduction reaction(CO_(2)RR)to formic acid is considered an economically viable avenue toward carbon neutrality.Indium-based catalysts have garnered considerable attention in CO_(2)RR owing to their elevated hydrogen evolution reaction(HER)overpotential and eco-friendly characteristics.We have synthesized In2O_(3)nanofibers rich in oxygen vacancies using the electrospinning technique.The resultant 500-In_(2)O_(3)exhibited superior performance in converting CO_(2)RR to HCOOH,achieving an impressive formate Faradaic efficiency(FE)of 92.1% at a current density of-600 mA cm^(-2).Moreover,it demonstrated remarkable stability,maintaining its performance over 100 h at a current density of-300 mA cm^(-2)under a neutral electrolyte.Density functio nal theory(DFT)calculations,in conjunction with spectroscopic characterizations,have revealed that a Cl-modified In catalyst exhibits a lowered energy barrier for the formation of*HCOOH,while simultaneously inhibiting the generation of*H,in contrast to its pristine In counterpart.Ultimately,we successfully engineered a dual-electrode system capable of simultaneously producing formate at both the cathode and the anode.At a current density of-100 mA cm^(-2),our system achieves a reduction in energy consumption by 12.5% and a significant enhancement in electrical energy conversion efficiency by 39.9%.展开更多
In the present study, niobium-doped indium oxide thin films were prepared by sol-gel spin coating technique. The effects of different Nb-doping contents on structural, morphological, optical, and electrical properties...In the present study, niobium-doped indium oxide thin films were prepared by sol-gel spin coating technique. The effects of different Nb-doping contents on structural, morphological, optical, and electrical properties of the films were characterized by means of X-ray diffraction （XRD）, field emission scanning electron microscopy （FESEM）, atomic force microscopy （AFM）, UV-Vis spectroscopy, and four point probe methods. XRD analysis confirmed the formation of cubic bixbyite structure of In203 with a small shift in major peak position toward lower angles with addition of Nb. FESEM micrographs show that grain size decreased with increasing the Nb-doping content. Optical and electrical studies revealed that optimum opto-electronic properties, including minimum electrical resistivity of 119.4 × 10^-3 Ω cm and an average optical transmittance of 85% in the visible region with a band gap of 3.37 eV were achieved for the films doped with Nb-doping content of 3 at.%. AFM studies show that addition of Nb at optimum content leads to the formation of compact films with smooth surface and less average roughness compared with the prepared ln2O3 films.展开更多
The present work mainly describes the technology for preparing indium-tin oxide （ITO） targets by cold isostatic pressing （CIP） and normal pressure sintering process. ITO powders were produced by chemical co-precip...The present work mainly describes the technology for preparing indium-tin oxide （ITO） targets by cold isostatic pressing （CIP） and normal pressure sintering process. ITO powders were produced by chemical co-precipitation and shaped into an ITO green compact with a relative density of 60% by CIP under 300 MPa. Then, an ITO target with a relative density larger than 99.6% was obtained by sintering this green compact at 1550℃ for 8 h. The effects of forming pressure, sintering temperature and sintering time on the density of the target were inves- tigated. Also, a discussion was made on the sintering atmosphere.展开更多
Indium tin oxide （ITO） nanoparticles with crystallite size of 12.6 nm and specific surface area of 45.7 m 2 ·g-1 were synthesized by co-precipitation method.The indium solution was obtained by dissolving metal ...Indium tin oxide （ITO） nanoparticles with crystallite size of 12.6 nm and specific surface area of 45.7 m 2 ·g-1 were synthesized by co-precipitation method.The indium solution was obtained by dissolving metal indium in HNO3.The tin solution was obtained by dissolving metal tin in HNO3 and followed by stabilizing with citric acid.The free of chlorine ions in the synthesis process brought several advantages：shortening the synthesis time,decreasing the particle agglomeration,decreasing the chlorine content in the ITO nanoparticles and improving the particle sinterability.This is the first time to report the synthesis of ITO nanoparticles free from chlorine contamination without using the expensive metal alkoxides as starting materials.展开更多
Indium tin oxide （ITO） thin films were prepared on alumina ceramic substrates by radio frequency magnetron sputtering. The samples were subsequently annealed in air at temperatures ranging from 500 to 1,100 ℃ for 1...Indium tin oxide （ITO） thin films were prepared on alumina ceramic substrates by radio frequency magnetron sputtering. The samples were subsequently annealed in air at temperatures ranging from 500 to 1,100 ℃ for 1 h. The influences of the annealing temperature on the microstructure and electrical properties of the ITO thin films were investigated, and the results indicate that the as-deposited ITO thin films are amorphous in nature. All samples were crystallized by annealing at 500 ~C. As the annealing temperature increases, the predominant orientation shifts from （222） to （400）. The carrier concentration decreases initially and then increases when the annealing temperature rises beyond 1,000 ℃. The resistivity of the ITO thin films increases smoothly as the annealing temperature increases to just below 900 ℃. Beyond 900 ℃, however, the resistivity of the films increases sharply. The annealing temperature has a significant effect on the stability of the ITO/Pt thin film thermocouples （TFTCs）. TFTCs annealed at 1,000 ℃ show improved high- temperature stability and Seebeck coefficients of up to 77.73 pV/℃.展开更多
Microbial cellulose （MC） membranes produced by Acetobacter xylinum NUST4.1,were used as flexible substrates for the fabrication of transparent indium tin oxide （ITO） electrodes.Transparent and conductive ITO thin ...Microbial cellulose （MC） membranes produced by Acetobacter xylinum NUST4.1,were used as flexible substrates for the fabrication of transparent indium tin oxide （ITO） electrodes.Transparent and conductive ITO thin films were deposited on MC membrane at room temperature using radio frequency （RF） magnetron sputtering.The optimum ITO deposition conditions were achieved by examining crystalline structure,surface morphology and op-toelectrical characteristics with X-ray diffraction （XRD）,scanning electron microscopy （SEM）,atomic force mi-croscopy （AFM）,and UV spectroscopy.The sheet resistance of the samples was measured with a four-point probe and the resistivity of the film was calculated.The results reveal that the preferred orientation of the deposited ITO crystals is strongly dependent upon with oxygen content （O2/Ar,volume ratio） in the sputtering chamber.And the ITO crystalline structure directly determines the conductivity of ITO-deposited films.High conductive [sheet resis-tance ～120 Ω·square-1 （Ω·sq-1）] and transparent （above 76%） ITO thin films （240 nm thick） were obtained with a moderate sputtering power （about 60 W） and with an oxygen flow rate of 0.25 ml·min-1 （sccm） during the deposi-tion.These results show that the ITO-MC electrodes can find their potential application in optoelectrical devices.展开更多
A transparent energy storage device is an essential component for transparent electronics.The increasing demand for high-power devices stimulates the development of transparent supercapacitors with high power density....A transparent energy storage device is an essential component for transparent electronics.The increasing demand for high-power devices stimulates the development of transparent supercapacitors with high power density.A transparent electrode for such supercapacitors can be assembled via the electrophoretic deposition of an active material powder with a binder onto a transparent substrate.The properties of the binder critically influence the electrochemical behavior and performance of the resulting electrode.Ethyl cellulose(EC)is known as an eco-friendly,transparent,flexible,and inexpensive material.Here,we fabricated an electrode film with EC binder via electrophoretic deposition on an indium tin oxide(ITO)substrate instead of using the conventional polytetrafluoroethylene(PTFE)binder.The assembled electrodes with EC and PTFE were compared to investigate the feasibility of EC as a binder from different perspectives,including homogeneity,wettability,electrochemical behavior,and mechanical stability.The EC enabled the formation of a homogeneous film composed of smaller particles and with a higher specific capacitance compared with films prepared with PTFE.The annealing improved the adhesion strength of the EC because of its glass transition;however,its hydrophobic nature limited utilization of the active material for charge storage.Subsequent electrochemical activation improved the wettability of the electrode,resulting in an increased capacitance of 60 F g^(-1).Furthermore,even with the lower wettability of EC compared with that of PTFE,better rate performance was possible with the EC electrode.The increased mechanical stability after the annealing process ensured an excellent cycle life of 95%capacitance retention for 15,000 cycles.展开更多
The time and temperature dependence of threshold voltage shift under positive-bias stress（PBS） and the following recovery process are investigated in amorphous indium-gallium-zinc-oxide（a-IGZO） thin-film transisto...The time and temperature dependence of threshold voltage shift under positive-bias stress（PBS） and the following recovery process are investigated in amorphous indium-gallium-zinc-oxide（a-IGZO） thin-film transistors. It is found that the time dependence of threshold voltage shift can be well described by a stretched exponential equation in which the time constant τ is found to be temperature dependent. Based on Arrhenius plots, an average effective energy barrier Eτ stress= 0.72 eV for the PBS process and an average effective energy barrier Eτ recovery= 0.58 eV for the recovery process are extracted respectively. A charge trapping/detrapping model is used to explain the threshold voltage shift in both the PBS and the recovery process. The influence of gate bias stress on transistor performance is one of the most critical issues for practical device development.展开更多
Indium tin oxide（ITO）thin films（100±10nm）were deposited on PC（polycarbonate）and glass substrates by rf（radio-frequency）mannetron spuutering.The oxygen content of the ITO films was changed by variation of ...Indium tin oxide（ITO）thin films（100±10nm）were deposited on PC（polycarbonate）and glass substrates by rf（radio-frequency）mannetron spuutering.The oxygen content of the ITO films was changed by variation of the sputtering gas composition.All the other deposition parameters were kept constant.The sheet resistance.optical transmittance and microstructure of ITO films were investigated using a four-point probe.spectrophotometer,X-ray diffractometer（XRD）and atomic force microscope（AFM）.Sheet resistances for the ITO films with optical transmittance more than 75% on PC substrates varied from 40Ω/cm^2 to more than 104 Ω/cm^2 with increasing oxygen partial pressure from O to about 2%.The same tendeney of sheet resistances increasing with increasing oxygen partial pressure was observed on glass substrates.The X-ray diffraction data indicated polycrystalline filns with grain orientations predominantly along（440）and （422）directions.The intensities of （440）and （422）peaks increased slightly with the increase of oxygen partial pressure both on PC and glass substrates.The AFM images show that the ITO films on PC substrates were dense and uniform.The average grain size of the films was about 40nm.展开更多
The electrical and optical properties of the indium tin oxide （ITO）/epoxy composite exhibit dramatic variations as functions of the ITO composition and ITO particle size. Sharp increases in the conductivity in the v...The electrical and optical properties of the indium tin oxide （ITO）/epoxy composite exhibit dramatic variations as functions of the ITO composition and ITO particle size. Sharp increases in the conductivity in the vicinity of a critical volume fraction have been found within the framework of percolation theory. A conductive and insulating transition model is extracted by the ITO particle network in the SEM image, and verified by the resistivity dependence on the temperature. The dependence of the optical transmittance on the particle size was studied. Further decreasing the ITO particle size could further improve the percolation threshold and light transparency of the composite film.展开更多
Hexagonal structure indium tin oxide（ITO）nanopowders were prepared by a solvothermal process at only 175 ℃ for 24 h and post-annealing at 400 ℃, using metal indium and SnCl4·5 H2 O as the raw materials. The m...Hexagonal structure indium tin oxide（ITO）nanopowders were prepared by a solvothermal process at only 175 ℃ for 24 h and post-annealing at 400 ℃, using metal indium and SnCl4·5 H2 O as the raw materials. The morphology, crystal structures and structure defects of products were, respectively, analyzed by scanning electron microscopy（SEM）, X-ray diffraction（XRD） and confocal microprobe Raman system, the elemental state was investigated by X-ray photoelectron spectroscopy（XPS）, and the optical properties were carried out by ultraviolet-visible（UV-Vis） and photoluminescence（PL） spectrophotometers. The results show that the products are hexagonal structure with a particles size of 28-41 nm; the morphology of products consists of sphere and irregular cubic.When pH values of solution increase, the content of oxygen vacancies increases and the optical band gap varies from3.59 to 3.78 eV. The products exhibit strong emission at417 nm with an excitation of 370 nm, and the PL intensity of samples increases with pH values increasing. Contrasting to cubic structure ITO powder, the hexagonal structure ITO has narrower optical band gap and higher PL intensity under the same excitation wavelength.展开更多
Ordered titanium dioxide nanotubes （TiOaNTs） modified with indium tin oxide （ITO） films were obtained via magnetron sputtering, in which ITO plate was used as a target, onto the as-anodized titania support followe...Ordered titanium dioxide nanotubes （TiOaNTs） modified with indium tin oxide （ITO） films were obtained via magnetron sputtering, in which ITO plate was used as a target, onto the as-anodized titania support followed by the calcination process. The morphology of fabricated material with deposited oxide was investigated using scanning electron microscopy. Raman and UV-Vis spectroscopies were utilized to characterize crystalline phase and optical properties of prepared samples, whereas X-ray photoelectron spectroscopy allowed determining the binding energy of present elements. In the case of titanium, three various oxidation states were identified and also the presence of indium and tin was confirmed. The electrochemical test carried out when the sample was exposed to light allows for selection of the most photoactive material. The highest photocurrent was registered when only 5-nm ITO layer was sputtered, and it equals 256 and 133 μA cm^-2 for the electrode material immersed in 0.5 M KOH and K2SO4 electrolytes, respectively, that is accordingly 3.5 and 4.4 times higher than the one observed for pristine titania. Furthermore, ITO-modified titania exhibits excellent photostability upon prolonged illumination that is of key importance for possible application in light-driven processes.展开更多
Isothermal decomposition process of chemically transforming indium tin oxide（ITO） powders into indium（III） hydroxide powders was investigated. Two types of powders were analyzed, i.e., non-activated and mechanical...Isothermal decomposition process of chemically transforming indium tin oxide（ITO） powders into indium（III） hydroxide powders was investigated. Two types of powders were analyzed, i.e., non-activated and mechanically activated. It has been found that in the case of activated sample, shorter induction periods appear, which permits growth of smaller crystals, while in the case of non-activated sample, long induction periods appear, characterized by the growth of larger crystals. DAEM approach has shown that decomposition processes of non-activated and mechanically activated samples can be described by contracting volume model with a linear combination of two different density distribution functions of apparent activation energies（Ea）, and with first-order model, with a single symmetrical density distribution function of Ea, respectively. It was established that specific characteristics of particles not only affect the mechanism of decomposition processes, but also have the significant impact on thermodynamic properties.展开更多
基金National Key Research and Development Program of China(2020YFA0710302)The Major Research Plan of the National Natural Science Foundation of China(91963206)+2 种基金The National Natural Science Foundation of China(52072169,51972164,51972167,22279053)The Fundamental Research Funds for the Central Universities(14380193)The Program for Guangdong Introducing Innovative and Entrepreneurial Teams(2019ZT08L101).
文摘On the surfaces of celestial bodies with no or thin atmospheres,such as the Moon and Mars,the solar wind irradiation process leads to the formation of hydrogen and helium enriched regions in the extraterrestrial soil particles.However,soil particles on the Earth with the similar composition lack such structures and properties.This discrepancy raises a key question whether there is a direct relationship between solar wind irradiation and the alterations in the structure and chemical performance of extraterrestrial materials.To address this question,this work investigates the effects of proton irradiation,simulating solar wind radiation,on the structure and photothermal catalytic properties of the classic catalyst In_(2)O_(3).It reveals that proton irradiation induces structural features in In_(2)O_(3) analogous to those characteristics of solar wind weathering observed in extraterrestrial materials.Furthermore,after proton beam irradiation with an energy of 30 keV and a dose of 3×10^(17) protons·cm^(-2),the methanol production yield of the In_(2)O_(3) catalyst increased to 2.6 times of its preirradiation level,and the methanol selectivity improved to 2.1 times of the original value.This work provides both theoretical and experimental support for the development of high-efficiency,radiation-resistant photothermal catalysts.
基金supported by the Russian Science Foundation(grant No.22-19-00037),https://rscf.ru/project/22-19-00037/.
文摘The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2).
基金supported by the National Natural Science Foundation of China(Nos.51771104,51871146,51971119)the Future Plan for Young Talent of Shandong University(No.2016WLJH40)the Innovation Program of Shanghai Municipal Education Commission(No.2019-01-07-00-10-E00053)。
文摘Negative permittivity has been widely studied in various metamaterials and percolating composites, of which the anomalous dielectric behavior was attributed to critical structural properties of building blocks.Herein, mono-phase ceramics of indium tin oxides(ITO) were sintered for epsilon-negative materials in MHz-k Hz frequency regions. Electrical conductivity and complex permittivity were analyzed with DrudeLorentz oscillator model. Carriers’ characters were measured based on Hall effect and the magnitude and frequency dispersion of negative permittivity were mainly determined by carrier concentration.Temperature-dependent dielectric properties further proved the epsilon-negative behaviors were closely associated with free carriers’ collective responses. It’s found that negative permittivity of ITO ceramics was mainly caused by plasma oscillations of free carriers, while the dielectric loss was mainly attributed to conduction loss. Negative permittivity realized here was related to materials intrinsic nature and this work preliminarily determined the mechanism of negative permittivity in doped ceramics from the perspective of carriers.
文摘Geometric, electronic and vibrational properties of the most stable and energetically favourable configurations of indium oxide clusters InmOn （1 ≤m, n ≤ 4） are investigated using density functional theory. The lowest energy geometries prefer the planar arrangement of the constituent atoms with a trend to maximize the number of ionic In-O bonds. Due to the charge transfer from In to O atoms, the electrostatic repulsion occurs between the atoms with the same kind of charge. The minimization of electrostatic repulsion and the maximization of In O bond number compete between each other and determine the location of the isometric total energy. The most stable linear In-O-In-O structure of In2O2 cluster is attributed to the reduced electrostatic repulsive energy at the expense of In-O bond number, while the lowest energy rhombus-like structure of In2O3 cluster reflects the maximized number of In O bonds. Furthermore, the vibrational frequencies of the lowest energy clusters are calculated and compared with the available experimental results. The energy gap and the charge density distribution for clusters with varying oxygen/indium ratio are also discussed.
基金supported by the National Key Research and Development Program of China(2016YFB0600902)。
文摘Silver catalyst has been extensively investigated for photocatalytic and electrochemical CO_(2)reduction.However,its high activity for selective hydrogenation of CO_(2)to methanol has not been confirmed.Here,the feasibility of the indium oxide supported silver catalyst was investigated for CO_(2)hydrogenation to methanol by the density functional theoretical(DFT)study and then by the experimental investigation.The DFT study shows there exists an intense Ag-In_(2)O_(3)interaction,which causes silver to be positively charged.The positively charged Ag species changes the electronic structure of the metal,facilitates the formation of the Ag-In_(2)O_(3)interfacial site for activation and dissociation of carbon dioxide.The promoted CO_(2)dissociation leads to the enhanced methanol synthesis via the CO hydrogenation route as CO_(2)^(*)→CO^(*)→HCO^(*)→H_(2)CO^(*)→H_(3)CO^(*)→H_(3)COH^(*).The Ag/In_(2)O_(3)catalyst was then prepared using the deposition-precipitation method.The experimental study confirms the theoretical prediction.The methanol selectivity of CO_(2)hydrogenation on Ag/In_(2)O_(3)reaches 100.0%at reaction temperature of 200℃.It remains more than 70.0%between 200 and 275℃.At 300℃and 5 MPa,the methanol selectivity still keeps 58.2%with a CO_(2)conversion of 13.6%and a space-time yield(STY)of methanol of 0.453 g_(methanol)g_(cat)^(-1)h^(-1),which is the highest methanol STY ever reported for silver catalyst.The catalyst characterization confirms the intense Ag-In_(2)O_(3)interaction as well,which causes high Ag dispersion,increases and stabilizes the oxygen vacancies and creates the active Ag-In_(2)O_(3)interfacial site for the enhanced CO_(2)hydrogenation to methanol.
基金supported by the National Key R&D Program of China(Grant No.2022YFB3806300).
文摘Infrared-transparent conductors have attracted considerable attention due to their potential applications in electromagnetic shielding,infrared sensors,and photovoltaic devices.However,most known materials face the critical challenge of balancing high infrared transmittance with high electrical conductivity across the broad infrared spectral band(2.5-25μm).While ultra-thin indium tin oxide(ITO)films have been demonstrated to exhibit superior infrared transmittance,their inherent low electrical conductivity necessitates additional enhancement strategies.This study systematically investigates the effects of oxygen vacancy concentration regulation and ultra-thin copper capping layer integration on the infrared optoelectronic properties of 20 nm-thick ITO films.A fundamental trade-off is revealed in ITO films that increased oxygen vacancy content enhances the electrical conductivity while compromising the infrared transmittance.Meanwhile,following the introduction of a Cu capping layer,the Cu/ITO system exhibits opposing dependencies of infrared transmittance and electrical conductivity on the capping layer thickness,with an optimum thickness of~3 nm.Finally,by constructing a Cu(3 nm)/ITO(20 nm)heterostructure with varying oxygen vacancy content,we demonstrate the combined effect of the ultra-thin Cu capping layer and moderate oxygen vacancy content on optimizing the carrier transport network.This configuration simultaneously minimizes surface/interfacial reflection and absorption losses,achieving high infrared transmittance(0.861)and a low sheet resistance of 400 W/sq.Our findings highlight the critical role of the combined effect of metal/oxide heterostructure design and defect engineering in optimizing infrared-transparent conductive properties.
基金supported by grants from the National Natural Science Foundation of China(52001227,52122107,51972224and21802037).
文摘Constructing structure-function relationships is critical for the rational design and development of efficient catalysts for CO_(2) electroreduction reaction(CO_(2)RR).In_(2)O_(3) is well-known for its specific ability to produce formic acid.However,how the crystal phase and surface affect the CO_(2)RR activity is still unclear,making it difficult to further improve the intrinsic activity and screen for the most active structure.In this work,cubic and hexagonal In_(2)O_(3) with different stable surfaces((111)and(110)for cubic,(120)and(104)for hexagonal)are investigated for CO_(2)RR.Theoretical results demonstrate that the adsorption of reactants on cubic In_(2)O_(3) is stronger than that on hexagonal In_(2)O_(3),with the cubic(111)surface being the most active for CO_(2)RR.In experiments,synthesized cubic In_(2)O_(3) nanosheets with predominantly exposed(111)surfaces exhibited a high HCOO^(-)Faradaic efficiency(87.5%)and HCOO^(–)current density(–16.7 mA cm^(-2))at–0.9 V vs RHE.In addition,an aqueous Zn-CO_(2) battery based on a cubic In2O3 cathode was assembled.Our work correlates the phases and surfaces with the CO_(2)RR activity,and provides a fundamental understanding of the structure-function relationship of In_(2)O_(3),thereby contributing to further improvements in its CO_(2)RR activity.Moreover,the results provide a principle for the directional preparation of materials with optimal phases and surfaces for efficient electrocatalysis.
基金supported by the National Key R&D Program of China(2023YFA1508002)the National Natural Science Foundation of China(22472139,U23A2087,U22A20392,22227802,22372137,22172126 and 22102136)+3 种基金the Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy(YLU-DNL Fund 2022008)the Natural Science Foundation of Fujian Province of China(2022J01044)the XMU Training Program of Innovation and Entrepreneurship for Undergraduates(202410384030,S_(2)02310384242)Supporting Project Number(RSP2025R304),King Saud University,Riyadh,Saudi Arabia。
文摘Electrocatalytic carbon dioxide reduction reaction(CO_(2)RR)to formic acid is considered an economically viable avenue toward carbon neutrality.Indium-based catalysts have garnered considerable attention in CO_(2)RR owing to their elevated hydrogen evolution reaction(HER)overpotential and eco-friendly characteristics.We have synthesized In2O_(3)nanofibers rich in oxygen vacancies using the electrospinning technique.The resultant 500-In_(2)O_(3)exhibited superior performance in converting CO_(2)RR to HCOOH,achieving an impressive formate Faradaic efficiency(FE)of 92.1% at a current density of-600 mA cm^(-2).Moreover,it demonstrated remarkable stability,maintaining its performance over 100 h at a current density of-300 mA cm^(-2)under a neutral electrolyte.Density functio nal theory(DFT)calculations,in conjunction with spectroscopic characterizations,have revealed that a Cl-modified In catalyst exhibits a lowered energy barrier for the formation of*HCOOH,while simultaneously inhibiting the generation of*H,in contrast to its pristine In counterpart.Ultimately,we successfully engineered a dual-electrode system capable of simultaneously producing formate at both the cathode and the anode.At a current density of-100 mA cm^(-2),our system achieves a reduction in energy consumption by 12.5% and a significant enhancement in electrical energy conversion efficiency by 39.9%.
基金Iran Initiative Nanotechnology Council for partially supporting this workMahar Fan Abzar Co.for AFM spectroscopy results
文摘In the present study, niobium-doped indium oxide thin films were prepared by sol-gel spin coating technique. The effects of different Nb-doping contents on structural, morphological, optical, and electrical properties of the films were characterized by means of X-ray diffraction （XRD）, field emission scanning electron microscopy （FESEM）, atomic force microscopy （AFM）, UV-Vis spectroscopy, and four point probe methods. XRD analysis confirmed the formation of cubic bixbyite structure of In203 with a small shift in major peak position toward lower angles with addition of Nb. FESEM micrographs show that grain size decreased with increasing the Nb-doping content. Optical and electrical studies revealed that optimum opto-electronic properties, including minimum electrical resistivity of 119.4 × 10^-3 Ω cm and an average optical transmittance of 85% in the visible region with a band gap of 3.37 eV were achieved for the films doped with Nb-doping content of 3 at.%. AFM studies show that addition of Nb at optimum content leads to the formation of compact films with smooth surface and less average roughness compared with the prepared ln2O3 films.
基金supported by the National High-Tech Research and Development Program of China(No. 2004AA303542)
文摘The present work mainly describes the technology for preparing indium-tin oxide （ITO） targets by cold isostatic pressing （CIP） and normal pressure sintering process. ITO powders were produced by chemical co-precipitation and shaped into an ITO green compact with a relative density of 60% by CIP under 300 MPa. Then, an ITO target with a relative density larger than 99.6% was obtained by sintering this green compact at 1550℃ for 8 h. The effects of forming pressure, sintering temperature and sintering time on the density of the target were inves- tigated. Also, a discussion was made on the sintering atmosphere.
基金supported by the Ph.D. programs Foundation of Ministry of Education of China (No.200802511022)
文摘Indium tin oxide （ITO） nanoparticles with crystallite size of 12.6 nm and specific surface area of 45.7 m 2 ·g-1 were synthesized by co-precipitation method.The indium solution was obtained by dissolving metal indium in HNO3.The tin solution was obtained by dissolving metal tin in HNO3 and followed by stabilizing with citric acid.The free of chlorine ions in the synthesis process brought several advantages：shortening the synthesis time,decreasing the particle agglomeration,decreasing the chlorine content in the ITO nanoparticles and improving the particle sinterability.This is the first time to report the synthesis of ITO nanoparticles free from chlorine contamination without using the expensive metal alkoxides as starting materials.
基金financially supported by the National Natural Science Foundation of China (No.61223002)the State Key Laboratory of Electronic Thin Films and Integrated Devices Foundation of China (No.KFJJ201206)Science and Technology Innovation Foundation of Sichuan (No.2012ZZ020)
文摘Indium tin oxide （ITO） thin films were prepared on alumina ceramic substrates by radio frequency magnetron sputtering. The samples were subsequently annealed in air at temperatures ranging from 500 to 1,100 ℃ for 1 h. The influences of the annealing temperature on the microstructure and electrical properties of the ITO thin films were investigated, and the results indicate that the as-deposited ITO thin films are amorphous in nature. All samples were crystallized by annealing at 500 ~C. As the annealing temperature increases, the predominant orientation shifts from （222） to （400）. The carrier concentration decreases initially and then increases when the annealing temperature rises beyond 1,000 ℃. The resistivity of the ITO thin films increases smoothly as the annealing temperature increases to just below 900 ℃. Beyond 900 ℃, however, the resistivity of the films increases sharply. The annealing temperature has a significant effect on the stability of the ITO/Pt thin film thermocouples （TFTCs）. TFTCs annealed at 1,000 ℃ show improved high- temperature stability and Seebeck coefficients of up to 77.73 pV/℃.
基金Supported by the National Natural Science Foundation of China （10776014） Nanjing University of Science and Technology （NUST） Research Funding
文摘Microbial cellulose （MC） membranes produced by Acetobacter xylinum NUST4.1,were used as flexible substrates for the fabrication of transparent indium tin oxide （ITO） electrodes.Transparent and conductive ITO thin films were deposited on MC membrane at room temperature using radio frequency （RF） magnetron sputtering.The optimum ITO deposition conditions were achieved by examining crystalline structure,surface morphology and op-toelectrical characteristics with X-ray diffraction （XRD）,scanning electron microscopy （SEM）,atomic force mi-croscopy （AFM）,and UV spectroscopy.The sheet resistance of the samples was measured with a four-point probe and the resistivity of the film was calculated.The results reveal that the preferred orientation of the deposited ITO crystals is strongly dependent upon with oxygen content （O2/Ar,volume ratio） in the sputtering chamber.And the ITO crystalline structure directly determines the conductivity of ITO-deposited films.High conductive [sheet resis-tance ～120 Ω·square-1 （Ω·sq-1）] and transparent （above 76%） ITO thin films （240 nm thick） were obtained with a moderate sputtering power （about 60 W） and with an oxygen flow rate of 0.25 ml·min-1 （sccm） during the deposi-tion.These results show that the ITO-MC electrodes can find their potential application in optoelectrical devices.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(Ministry of Science,ICT&Future Planning)(NRF-2017R1C1B2005470)(NRF-2018R1A4A1022260)。
文摘A transparent energy storage device is an essential component for transparent electronics.The increasing demand for high-power devices stimulates the development of transparent supercapacitors with high power density.A transparent electrode for such supercapacitors can be assembled via the electrophoretic deposition of an active material powder with a binder onto a transparent substrate.The properties of the binder critically influence the electrochemical behavior and performance of the resulting electrode.Ethyl cellulose(EC)is known as an eco-friendly,transparent,flexible,and inexpensive material.Here,we fabricated an electrode film with EC binder via electrophoretic deposition on an indium tin oxide(ITO)substrate instead of using the conventional polytetrafluoroethylene(PTFE)binder.The assembled electrodes with EC and PTFE were compared to investigate the feasibility of EC as a binder from different perspectives,including homogeneity,wettability,electrochemical behavior,and mechanical stability.The EC enabled the formation of a homogeneous film composed of smaller particles and with a higher specific capacitance compared with films prepared with PTFE.The annealing improved the adhesion strength of the EC because of its glass transition;however,its hydrophobic nature limited utilization of the active material for charge storage.Subsequent electrochemical activation improved the wettability of the electrode,resulting in an increased capacitance of 60 F g^(-1).Furthermore,even with the lower wettability of EC compared with that of PTFE,better rate performance was possible with the EC electrode.The increased mechanical stability after the annealing process ensured an excellent cycle life of 95%capacitance retention for 15,000 cycles.
基金Project supported by the National Basic Research Program of China(Grant Nos.2011CB301900 and 2011CB922100)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The time and temperature dependence of threshold voltage shift under positive-bias stress（PBS） and the following recovery process are investigated in amorphous indium-gallium-zinc-oxide（a-IGZO） thin-film transistors. It is found that the time dependence of threshold voltage shift can be well described by a stretched exponential equation in which the time constant τ is found to be temperature dependent. Based on Arrhenius plots, an average effective energy barrier Eτ stress= 0.72 eV for the PBS process and an average effective energy barrier Eτ recovery= 0.58 eV for the recovery process are extracted respectively. A charge trapping/detrapping model is used to explain the threshold voltage shift in both the PBS and the recovery process. The influence of gate bias stress on transistor performance is one of the most critical issues for practical device development.
文摘Indium tin oxide（ITO）thin films（100±10nm）were deposited on PC（polycarbonate）and glass substrates by rf（radio-frequency）mannetron spuutering.The oxygen content of the ITO films was changed by variation of the sputtering gas composition.All the other deposition parameters were kept constant.The sheet resistance.optical transmittance and microstructure of ITO films were investigated using a four-point probe.spectrophotometer,X-ray diffractometer（XRD）and atomic force microscope（AFM）.Sheet resistances for the ITO films with optical transmittance more than 75% on PC substrates varied from 40Ω/cm^2 to more than 104 Ω/cm^2 with increasing oxygen partial pressure from O to about 2%.The same tendeney of sheet resistances increasing with increasing oxygen partial pressure was observed on glass substrates.The X-ray diffraction data indicated polycrystalline filns with grain orientations predominantly along（440）and （422）directions.The intensities of （440）and （422）peaks increased slightly with the increase of oxygen partial pressure both on PC and glass substrates.The AFM images show that the ITO films on PC substrates were dense and uniform.The average grain size of the films was about 40nm.
基金supported by the National Natural Science Foundation of China(Grant Nos.61222501 and 61335004)
文摘The electrical and optical properties of the indium tin oxide （ITO）/epoxy composite exhibit dramatic variations as functions of the ITO composition and ITO particle size. Sharp increases in the conductivity in the vicinity of a critical volume fraction have been found within the framework of percolation theory. A conductive and insulating transition model is extracted by the ITO particle network in the SEM image, and verified by the resistivity dependence on the temperature. The dependence of the optical transmittance on the particle size was studied. Further decreasing the ITO particle size could further improve the percolation threshold and light transparency of the composite film.
基金financially supported by the Beijing Natural Science Foundation(No.2142025)
文摘Hexagonal structure indium tin oxide（ITO）nanopowders were prepared by a solvothermal process at only 175 ℃ for 24 h and post-annealing at 400 ℃, using metal indium and SnCl4·5 H2 O as the raw materials. The morphology, crystal structures and structure defects of products were, respectively, analyzed by scanning electron microscopy（SEM）, X-ray diffraction（XRD） and confocal microprobe Raman system, the elemental state was investigated by X-ray photoelectron spectroscopy（XPS）, and the optical properties were carried out by ultraviolet-visible（UV-Vis） and photoluminescence（PL） spectrophotometers. The results show that the products are hexagonal structure with a particles size of 28-41 nm; the morphology of products consists of sphere and irregular cubic.When pH values of solution increase, the content of oxygen vacancies increases and the optical band gap varies from3.59 to 3.78 eV. The products exhibit strong emission at417 nm with an excitation of 370 nm, and the PL intensity of samples increases with pH values increasing. Contrasting to cubic structure ITO powder, the hexagonal structure ITO has narrower optical band gap and higher PL intensity under the same excitation wavelength.
基金financially supported by the Polish National Science Centre:Grant No.2012/07/D/ST5/02269supported by the Foundation for Polish Science (FNP)+1 种基金the financial support from Polish National Science Centre under Grant No.2015/17/D/ ST5/02571the financial support from Polish National Science Centre under Grant No.2016/23/N/ST5/02071
文摘Ordered titanium dioxide nanotubes （TiOaNTs） modified with indium tin oxide （ITO） films were obtained via magnetron sputtering, in which ITO plate was used as a target, onto the as-anodized titania support followed by the calcination process. The morphology of fabricated material with deposited oxide was investigated using scanning electron microscopy. Raman and UV-Vis spectroscopies were utilized to characterize crystalline phase and optical properties of prepared samples, whereas X-ray photoelectron spectroscopy allowed determining the binding energy of present elements. In the case of titanium, three various oxidation states were identified and also the presence of indium and tin was confirmed. The electrochemical test carried out when the sample was exposed to light allows for selection of the most photoactive material. The highest photocurrent was registered when only 5-nm ITO layer was sputtered, and it equals 256 and 133 μA cm^-2 for the electrode material immersed in 0.5 M KOH and K2SO4 electrolytes, respectively, that is accordingly 3.5 and 4.4 times higher than the one observed for pristine titania. Furthermore, ITO-modified titania exhibits excellent photostability upon prolonged illumination that is of key importance for possible application in light-driven processes.
基金partially supported by the Ministry of Science and Environmental Protection of Serbia under the Project 172015
文摘Isothermal decomposition process of chemically transforming indium tin oxide（ITO） powders into indium（III） hydroxide powders was investigated. Two types of powders were analyzed, i.e., non-activated and mechanically activated. It has been found that in the case of activated sample, shorter induction periods appear, which permits growth of smaller crystals, while in the case of non-activated sample, long induction periods appear, characterized by the growth of larger crystals. DAEM approach has shown that decomposition processes of non-activated and mechanically activated samples can be described by contracting volume model with a linear combination of two different density distribution functions of apparent activation energies（Ea）, and with first-order model, with a single symmetrical density distribution function of Ea, respectively. It was established that specific characteristics of particles not only affect the mechanism of decomposition processes, but also have the significant impact on thermodynamic properties.
