Combining with the exigent demand of the development of satellite gravimetry system in China, aiming at the determination of technical indexes of gravity satellite orbit parameters, on the basis of the numerical exper...Combining with the exigent demand of the development of satellite gravimetry system in China, aiming at the determination of technical indexes of gravity satellite orbit parameters, on the basis of the numerical experiments and results analysis, the design indexes of gravity satellite orbit height, inter-satellite range and the orbit inclination are analyzed and calculated, and the issues towards twin gravity satellites such as coherence requirement of the orbit semi-major axes, control requirement of the pitch angle and time interval requirement to keep twin satellites formation in mobility are diseussed. Results show that the satellite orbit height is 400 km to 500 km, the inter-satellite range is about 220 km, the satellite orbit inclination is between polar orbit and sun-synchronous orbit, the semi-major axes difference of twin satellites orbit is within ± 70. 146 m, the pitch angle of twin satellites is about 0.9 degree, and the time interval to keep twin satellites formation in mobility is 7 days to 15 days.展开更多
This paper describes the characteristics of liquefied natural gas （LNG） carriers briefly. The LNG carrier includes power plant selection, vapor treatment, liquid cargo tank type, etc. Two parameters fuel substitutio...This paper describes the characteristics of liquefied natural gas （LNG） carriers briefly. The LNG carrier includes power plant selection, vapor treatment, liquid cargo tank type, etc. Two parameters fuel substitution rate and recovery of boil of gas （BOG） volume to energy efficiency design index （EEDI） formula are added, and EEDI formula of LNG carriers is established based on ship EEDI formula. Then, based on steam turbine propulsion device of LNG carriers, mathematical models of LNG carriers＇ reference line value are established in this paper. By verification, the EEDI formula of LNG carriers described in this paper can provide a reference for LNG carrier EEDI calculation and green shipbuilding.展开更多
More than 10000 different types of ship ply the waters of Bangladesh all year round,but the performance of these ships in terms of CO2 emission is not known and regulations related to energy efficiency of inland water...More than 10000 different types of ship ply the waters of Bangladesh all year round,but the performance of these ships in terms of CO2 emission is not known and regulations related to energy efficiency of inland waterway ships remain nonexistent.This paper attempts to assess the present situation of inland class vessels in terms of Energy Efficiency Design Index(EEDI).With the use of a developed database of inland vessels in Bangladesh,EEDI reference lines for different types of inland vessels in Bangladesh were established and then compared with those of other countries.The present EEDI of existing inland vessels was investigated.Results indicate that most of the existing vessels do not meet the current EEDI baseline.Hence,new guidelines are necessary to achieve EEDI compliance in the near future.Some recommendations were proposed for improving CO2 emissions,with the socioeconomic and technical factors in Bangladesh taken into consideration.展开更多
We first design and analyze the contour surface of the globoidal indexing cam with the aid of computer, and then do optimum design according to the requirements of dynamics. Finally, we discuss the problem of the pres...We first design and analyze the contour surface of the globoidal indexing cam with the aid of computer, and then do optimum design according to the requirements of dynamics. Finally, we discuss the problem of the pressure angle of the globoidal indexing cam mechanism in detail and put forward a new concept of equivalent pressure angle.展开更多
The article deeply and systematically probed into a series of problems being faced for establishing index futures transaction in China. Drawing on the successful experiences of other relative countries and according t...The article deeply and systematically probed into a series of problems being faced for establishing index futures transaction in China. Drawing on the successful experiences of other relative countries and according to Chinese real conditions, the author chooses Shanghai composite index as subject-matter, and has designed an index futures contract that accord with the situation of China.展开更多
An effective method to design structural Left-handed material（LHM） was proposed. A commercial finite element software HFSS and S-parameter retrieval method were used to determine the effective constitutive parameter...An effective method to design structural Left-handed material（LHM） was proposed. A commercial finite element software HFSS and S-parameter retrieval method were used to determine the effective constitutive parameters of the metamaterials, and topology optimization technique was introduced to design the microstructure configurations of the materials with desired electromagnetic characteristics. The material considered was a periodic array of dielectric substrates attached with metal film pieces. By controlling the arrangements of the metal film pieces in the design domain, the potential microstructure with desired electromagnetic characteristics can be obtained finally. Two different LHMs were obtained with maximum bandwidth of negative refraction, and the experimental results show that negative refractive indices appear while the metamaterials have simultaneously negative permittivity and negative permeability. Topology optimization technique is found to be an effective tool for configuration design of LHMs.展开更多
This paper addresses geometry design of a new kind of 2-DOF parallel manipulator actuated horizontally by linear actua- tors. The first step of the optimum design involves developing a non-dimensional structure of the...This paper addresses geometry design of a new kind of 2-DOF parallel manipulator actuated horizontally by linear actua- tors. The first step of the optimum design involves developing a non-dimensional structure of the planar 2-DOF parallel manipulator. The global conditioning index, global velocity index, global stiffness index and global payload index of the 2-DOF parallel manipu- lators are investigated, and the geometrical parameters without dimension are determined with respect to the specification on per- formances. Finally, based on the optimum non-dimensional result, the optimum dimensional parameters are achieved which is suit- able for the desired workspace. The optimum methodology of this paper is convenient and can be extended to other parallel mecha-展开更多
The CO2 emission reduction policy of the International Maritime Organization(IMO)recommends that the operation of ships,managed by maritime transport companies,should be energy-efficient.An evaluation method that can ...The CO2 emission reduction policy of the International Maritime Organization(IMO)recommends that the operation of ships,managed by maritime transport companies,should be energy-efficient.An evaluation method that can determine how successfully a ship implements the energy efficiency plan is proposed in this study.To develop this method,the measures required for energy-efficient ship operations according to the Ship Energy Efficiency Management Plan(SEEMP)operational guidelines were selected.The weights of the selected measures,which indicate how they contribute to the energy-efficient operation of a ship,were derived using a survey based on the analytic hierarchy process(AHP)method.Consequently,using these measures and their weights,a new evaluation method was proposed.This evaluation method was applied to shipping companies in South Korea,and their ship operation energy efficiency indices were derived and compared.This evaluation method will be useful to the government and shipping companies in assessing the energy efficiency of ship operations.展开更多
By comparing landscape patterns of suburban and urban rivers in the same flow path, and analyzing patch indexes of urban river landscapes, corresponding sustainable eco-design strategies were proposed, ecodesign theor...By comparing landscape patterns of suburban and urban rivers in the same flow path, and analyzing patch indexes of urban river landscapes, corresponding sustainable eco-design strategies were proposed, ecodesign theory system and eco-restoration design techniques were coupled, so as to explore new digital eco-design means of urban river landscapes by targeting at regional ecological consistency.展开更多
Refractive index inhomogeneity is one of the important characteristics of optical coating material, which is one of the key factors to produce loss to the ultra-low residual reflection coatings except using the refrac...Refractive index inhomogeneity is one of the important characteristics of optical coating material, which is one of the key factors to produce loss to the ultra-low residual reflection coatings except using the refractive index inhomogeneity to obtain gradient-index coating. In the normal structure of antireflection coatings for center wavelength at 532 nm, the physical thicknesses of layer H and layer L are 22.18 nm and 118.86 nm, respectively. The residual reflectance caused by refractive index inhomogeneity（the degree of inhomogeneous is between -0.2 and 0.2） is about 200 ppm, and the minimum reflectivity wavelength is between 528.2 nm and 535.2 nm. A new numerical method adding the refractive index inhomogeneity to the spectra calculation was proposed to design the laser antireflection coatings, which can achieve the design of antireflection coatings with ppm residual reflection by adjusting physical thickness of the couple layers. When the degree of refractive index inhomogeneity of the layer H and layer L is-0.08 and 0.05 respectively, the residual reflectance increase from zero to 0.0769% at 532 nm. According to the above accuracy numerical method, if layer H physical thickness increases by 1.30 nm and layer L decrease by 4.50 nm, residual reflectance of thin film will achieve to 2.06 ppm. When the degree of refractive index inhomogeneity of the layer H and layer L is 0.08 and -0.05 respectively, the residual reflectance increase from zero to 0.0784% at 532 nm. The residual reflectance of designed thin film can be reduced to 0.8 ppm by decreasing the layer H of 1.55 nm while increasing the layer L of 4.94 nm.展开更多
In a very large digital library that support computer aided collaborative design, an indexing process is crucial whenever the retrieval process has to select among many possible designs. In this paper, we address the...In a very large digital library that support computer aided collaborative design, an indexing process is crucial whenever the retrieval process has to select among many possible designs. In this paper, we address the problem of retrieving important design and engineering information by structural indexing. A design is represented by a model dependency graph, therefor, the indexing problem is to determine whether a graph is present or absent in a database of model dependency graphs. we present a novel graph indexing method using polynomial characterization of a model dependency graph and on hashing. Such an approach is able to create an high efficient 3D solid digital library for retrieving and extracting solid geometric model and engineering information.展开更多
This paper proposes a tube-based method for the asynchronous observation problem of discrete-time switched linear systems in the presence of amplitude-bounded disturbances.Sufficient stability conditions of the nomina...This paper proposes a tube-based method for the asynchronous observation problem of discrete-time switched linear systems in the presence of amplitude-bounded disturbances.Sufficient stability conditions of the nominal observer error system under mode-dependent persistent dwell-time(MPDT)switching are first established. Taking the disturbances into account, a novel asynchronous MPDT robust positive invariant(RPI) set and an asynchronous MPDT generalized RPI(GRPI)set are determined for the difference system between the nominal and disturbed observer error systems. Further, the global uniform asymptotical stability of the observer error system is established in the sense of converging to the asynchronous MPDT GRPI set, i.e., the cross section of the tube of the observer error system. Finally, the proposed results are validated on a space robot manipulator example.展开更多
基金supported by the National Natural Science Foundation of China(41174026,41104047,41174017)the Key laboratory Foundation of Geo-space Environment and Geodesy of Ministry of Education(11-01-03)
文摘Combining with the exigent demand of the development of satellite gravimetry system in China, aiming at the determination of technical indexes of gravity satellite orbit parameters, on the basis of the numerical experiments and results analysis, the design indexes of gravity satellite orbit height, inter-satellite range and the orbit inclination are analyzed and calculated, and the issues towards twin gravity satellites such as coherence requirement of the orbit semi-major axes, control requirement of the pitch angle and time interval requirement to keep twin satellites formation in mobility are diseussed. Results show that the satellite orbit height is 400 km to 500 km, the inter-satellite range is about 220 km, the satellite orbit inclination is between polar orbit and sun-synchronous orbit, the semi-major axes difference of twin satellites orbit is within ± 70. 146 m, the pitch angle of twin satellites is about 0.9 degree, and the time interval to keep twin satellites formation in mobility is 7 days to 15 days.
基金Foundation item： Supported by the National Special Fund for Agro-scientific Research in the Public Interest （No.201003024）, and the National Natural Science Foundation of China （No.51409042 No. 51209034）.
文摘This paper describes the characteristics of liquefied natural gas （LNG） carriers briefly. The LNG carrier includes power plant selection, vapor treatment, liquid cargo tank type, etc. Two parameters fuel substitution rate and recovery of boil of gas （BOG） volume to energy efficiency design index （EEDI） formula are added, and EEDI formula of LNG carriers is established based on ship EEDI formula. Then, based on steam turbine propulsion device of LNG carriers, mathematical models of LNG carriers＇ reference line value are established in this paper. By verification, the EEDI formula of LNG carriers described in this paper can provide a reference for LNG carrier EEDI calculation and green shipbuilding.
文摘More than 10000 different types of ship ply the waters of Bangladesh all year round,but the performance of these ships in terms of CO2 emission is not known and regulations related to energy efficiency of inland waterway ships remain nonexistent.This paper attempts to assess the present situation of inland class vessels in terms of Energy Efficiency Design Index(EEDI).With the use of a developed database of inland vessels in Bangladesh,EEDI reference lines for different types of inland vessels in Bangladesh were established and then compared with those of other countries.The present EEDI of existing inland vessels was investigated.Results indicate that most of the existing vessels do not meet the current EEDI baseline.Hence,new guidelines are necessary to achieve EEDI compliance in the near future.Some recommendations were proposed for improving CO2 emissions,with the socioeconomic and technical factors in Bangladesh taken into consideration.
文摘We first design and analyze the contour surface of the globoidal indexing cam with the aid of computer, and then do optimum design according to the requirements of dynamics. Finally, we discuss the problem of the pressure angle of the globoidal indexing cam mechanism in detail and put forward a new concept of equivalent pressure angle.
文摘The article deeply and systematically probed into a series of problems being faced for establishing index futures transaction in China. Drawing on the successful experiences of other relative countries and according to Chinese real conditions, the author chooses Shanghai composite index as subject-matter, and has designed an index futures contract that accord with the situation of China.
基金Funded by the National Natural Science Foundation of China (Nos.90605002, 90816025 and 10721062)the National Basic Research Programof China (No. 2006CB601205)
文摘An effective method to design structural Left-handed material（LHM） was proposed. A commercial finite element software HFSS and S-parameter retrieval method were used to determine the effective constitutive parameters of the metamaterials, and topology optimization technique was introduced to design the microstructure configurations of the materials with desired electromagnetic characteristics. The material considered was a periodic array of dielectric substrates attached with metal film pieces. By controlling the arrangements of the metal film pieces in the design domain, the potential microstructure with desired electromagnetic characteristics can be obtained finally. Two different LHMs were obtained with maximum bandwidth of negative refraction, and the experimental results show that negative refractive indices appear while the metamaterials have simultaneously negative permittivity and negative permeability. Topology optimization technique is found to be an effective tool for configuration design of LHMs.
文摘This paper addresses geometry design of a new kind of 2-DOF parallel manipulator actuated horizontally by linear actua- tors. The first step of the optimum design involves developing a non-dimensional structure of the planar 2-DOF parallel manipulator. The global conditioning index, global velocity index, global stiffness index and global payload index of the 2-DOF parallel manipu- lators are investigated, and the geometrical parameters without dimension are determined with respect to the specification on per- formances. Finally, based on the optimum non-dimensional result, the optimum dimensional parameters are achieved which is suit- able for the desired workspace. The optimum methodology of this paper is convenient and can be extended to other parallel mecha-
基金support from the project titled "Development of Ship-handling and Passenger Evacuation Support System" funded by the Ministry of Oceans and Fisheries(South Korea-MOF)
文摘The CO2 emission reduction policy of the International Maritime Organization(IMO)recommends that the operation of ships,managed by maritime transport companies,should be energy-efficient.An evaluation method that can determine how successfully a ship implements the energy efficiency plan is proposed in this study.To develop this method,the measures required for energy-efficient ship operations according to the Ship Energy Efficiency Management Plan(SEEMP)operational guidelines were selected.The weights of the selected measures,which indicate how they contribute to the energy-efficient operation of a ship,were derived using a survey based on the analytic hierarchy process(AHP)method.Consequently,using these measures and their weights,a new evaluation method was proposed.This evaluation method was applied to shipping companies in South Korea,and their ship operation energy efficiency indices were derived and compared.This evaluation method will be useful to the government and shipping companies in assessing the energy efficiency of ship operations.
基金Sponsored by National Natural Science Foundation of China(51208428)Sichuan Provincial Applied Fundamental Research Program(2013JY0038)Research Program of Sichuan Provincial Department of Education(JGYQ201419)
文摘By comparing landscape patterns of suburban and urban rivers in the same flow path, and analyzing patch indexes of urban river landscapes, corresponding sustainable eco-design strategies were proposed, ecodesign theory system and eco-restoration design techniques were coupled, so as to explore new digital eco-design means of urban river landscapes by targeting at regional ecological consistency.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61405145 and 61235011)the Natural Science Foundation of Tianjin,China(Grant No.15JCZDJC31900)the China Postdoctoral Science Foundation(Grant Nos.2015T80115 and 2014M560104)
文摘Refractive index inhomogeneity is one of the important characteristics of optical coating material, which is one of the key factors to produce loss to the ultra-low residual reflection coatings except using the refractive index inhomogeneity to obtain gradient-index coating. In the normal structure of antireflection coatings for center wavelength at 532 nm, the physical thicknesses of layer H and layer L are 22.18 nm and 118.86 nm, respectively. The residual reflectance caused by refractive index inhomogeneity（the degree of inhomogeneous is between -0.2 and 0.2） is about 200 ppm, and the minimum reflectivity wavelength is between 528.2 nm and 535.2 nm. A new numerical method adding the refractive index inhomogeneity to the spectra calculation was proposed to design the laser antireflection coatings, which can achieve the design of antireflection coatings with ppm residual reflection by adjusting physical thickness of the couple layers. When the degree of refractive index inhomogeneity of the layer H and layer L is-0.08 and 0.05 respectively, the residual reflectance increase from zero to 0.0769% at 532 nm. According to the above accuracy numerical method, if layer H physical thickness increases by 1.30 nm and layer L decrease by 4.50 nm, residual reflectance of thin film will achieve to 2.06 ppm. When the degree of refractive index inhomogeneity of the layer H and layer L is 0.08 and -0.05 respectively, the residual reflectance increase from zero to 0.0784% at 532 nm. The residual reflectance of designed thin film can be reduced to 0.8 ppm by decreasing the layer H of 1.55 nm while increasing the layer L of 4.94 nm.
文摘In a very large digital library that support computer aided collaborative design, an indexing process is crucial whenever the retrieval process has to select among many possible designs. In this paper, we address the problem of retrieving important design and engineering information by structural indexing. A design is represented by a model dependency graph, therefor, the indexing problem is to determine whether a graph is present or absent in a database of model dependency graphs. we present a novel graph indexing method using polynomial characterization of a model dependency graph and on hashing. Such an approach is able to create an high efficient 3D solid digital library for retrieving and extracting solid geometric model and engineering information.
基金supported in part by the National Defense Basic Scientific Research Program of China(JCKY2018603C015)Cultivation Plan of Major Research Program of Harbin Institute of Technology(ZDXMPY20180101)
文摘This paper proposes a tube-based method for the asynchronous observation problem of discrete-time switched linear systems in the presence of amplitude-bounded disturbances.Sufficient stability conditions of the nominal observer error system under mode-dependent persistent dwell-time(MPDT)switching are first established. Taking the disturbances into account, a novel asynchronous MPDT robust positive invariant(RPI) set and an asynchronous MPDT generalized RPI(GRPI)set are determined for the difference system between the nominal and disturbed observer error systems. Further, the global uniform asymptotical stability of the observer error system is established in the sense of converging to the asynchronous MPDT GRPI set, i.e., the cross section of the tube of the observer error system. Finally, the proposed results are validated on a space robot manipulator example.
