A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which ca...A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.展开更多
In this paper,an incremental contact model is developed for the elastic self-affine fractal rough surfaces under plane strain condition.The contact between a rough surface and a rigid plane is simplified by the accumu...In this paper,an incremental contact model is developed for the elastic self-affine fractal rough surfaces under plane strain condition.The contact between a rough surface and a rigid plane is simplified by the accumulation of identical line contacts with half-width given by the truncated area divided by the contact patch number at varying heights.Based on the contact stiffness of two-dimensional flat punch,the total stiffness of rough surface is estimated,and then the normal load is calculated by an incremental method.For various rough surfaces,the approximately linear load-area relationships predicted by the proposed model agree well with the results of finite element simulations.It is found that the real average contact pressure depends significantly on profile properties.展开更多
Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of productio...Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.展开更多
Molten iron temperature as well as Si, P, and S contents is the most essential molten iron quality （MIQ） indices in the blast furnace （BF） ironmaking, which requires strict monitoring during the whole ironmaking p...Molten iron temperature as well as Si, P, and S contents is the most essential molten iron quality （MIQ） indices in the blast furnace （BF） ironmaking, which requires strict monitoring during the whole ironmaking production. However, these MIQ parameters are difficult to be directly measured online, and large-time delay exists in off-line analysis through laboratory sampling. Focusing on the practical challenge, a data-driven modeling method was presented for the prediction of MIQ using the improved muhivariable incremental random vector functional-link net- works （M-I-RVFLNs）. Compared with the conventional random vector functional-link networks （RVFLNs） and the online sequential RVFLNs, the M-I-RVFLNs have solved the problem of deciding the optimal number of hidden nodes and overcome the overfitting problems. Moreover, the proposed M I RVFLNs model has exhibited the potential for multivariable prediction of the MIQ and improved the terminal condition for the multiple-input multiple-out- put （MIMO） dynamic system, which is suitable for the BF ironmaking process in practice. Ultimately, industrial experiments and contrastive researches have been conducted on the BF No. 2 in Liuzhou Iron and Steel Group Co. Ltd. of China using the proposed method, and the results demonstrate that the established model produces better estima ting accuracy than other MIQ modeling methods.展开更多
The objective of this study is to construct a multi-department symptom-based automatic diagnosis model.However,it is dificult to establish a model to classify plenty of diseases and collect thousands of disease-sympto...The objective of this study is to construct a multi-department symptom-based automatic diagnosis model.However,it is dificult to establish a model to classify plenty of diseases and collect thousands of disease-symptom datasets simultaneously.Inspired by the thought of"knowledge graph is model",this study proposes to build an experience-infused knowledge model by continuously learning the experiential knowledge from data,and incrementally injecting it into the knowledge graph.Therefore,incremental learning and injection are used to solve the data collection problem,and the knowledge graph is modeled and containerized to solve the large-scale multi-classification problems.First,an entity linking method is designed and a heterogeneous knowledge graph is constructed by graph fusion.Then,an adaptive neural network model is constructed for each dataset,and the data is used for statistical initialization and model training.Finally,the weights and biases of the learned neural network model are updated to the knowledge graph.It is worth noting that for the incremental process,we consider both the data and class increments.We evaluate the diagnostic effectiveness of the model on the current dataset and the anti-forgetting ability on the historical dataset after class increment on three public datasets.Compared with the classical model,the proposed model improves the diagnostic accuracy of the three datasets by 5%,2%,and 15%on average,respectively.Meanwhile,the model under incremental learning has a better ability to resist forgetting.展开更多
Four-dimensional variational(4D-VAR) data assimilation method is a perfect data assimilation solution in theory, but the computational issue is quite difficult in operational implementation.The incremental 4D-VAR assi...Four-dimensional variational(4D-VAR) data assimilation method is a perfect data assimilation solution in theory, but the computational issue is quite difficult in operational implementation.The incremental 4D-VAR assimilation scheme is set up in order to reduce the computational cost. It is shown that the accuracy of the observations, the length of the assimilation window and the choice of the first guess have an important influence on the assimilation outcome through the contrast experiment. Compared with the standard 4D-VAR assimilation scheme, the incremental 4D-VAR assimilation scheme shows its advantage in the computation speed through an assimilation experiment.展开更多
The technique of incremental updating,which can better guarantee the real-time situation of navigational map,is the developing orientation of navigational road network updating.The data center of vehicle navigation sy...The technique of incremental updating,which can better guarantee the real-time situation of navigational map,is the developing orientation of navigational road network updating.The data center of vehicle navigation system is in charge of storing incremental data,and the spatio-temporal data model for storing incremental data does affect the efficiency of the response of the data center to the requirements of incremental data from the vehicle terminal.According to the analysis on the shortcomings of several typical spatio-temporal data models used in the data center and based on the base map with overlay model,the reverse map with overlay model (RMOM) was put forward for the data center to make rapid response to incremental data request.RMOM supports the data center to store not only the current complete road network data,but also the overlays of incremental data from the time when each road network changed to the current moment.Moreover,the storage mechanism and index structure of the incremental data were designed,and the implementation algorithm of RMOM was developed.Taking navigational road network in Guangzhou City as an example,the simulation test was conducted to validate the efficiency of RMOM.Results show that the navigation database in the data center can response to the requirements of incremental data by only one query with RMOM,and costs less time.Compared with the base map with overlay model,the data center does not need to temporarily overlay incremental data with RMOM,so time-consuming of response is significantly reduced.RMOM greatly improves the efficiency of response and provides strong support for the real-time situation of navigational road network.展开更多
Warp yarns and weft yarns of plain woven fabric are the principal axes of mate- rial of fabric. They are orthogonal in their original con?guration, but are obliquely crisscross in deformed con?guration in general. I...Warp yarns and weft yarns of plain woven fabric are the principal axes of mate- rial of fabric. They are orthogonal in their original con?guration, but are obliquely crisscross in deformed con?guration in general. In this paper the expressions of incremental components of strain tensor are derived, the non-linear model of woven fabric is linearized physically and its geometric non-linearity survives. The convenience of determining the total deformation is shown by the choice of the coordinate system of the principal axes of the material, with the convergence of the incremental methods illustrated by examples. This incremental model furnishes a basis for numerical simulations of fabric draping and wrinkling based on the micro-mechanical model of fabric.展开更多
In this paper, we present a modular incremental statistical model for English full parsing. Unlike other full parsing approaches in which the analysis of the sentence is a uniform process, our model separates the full...In this paper, we present a modular incremental statistical model for English full parsing. Unlike other full parsing approaches in which the analysis of the sentence is a uniform process, our model separates the full parsing into shallow parsing and sentence skeleton parsing. In shallow parsing, we finish POS tagging, Base NP identification, prepositional phrase attachment and subordinate clause identification. In skeleton parsing, we use a layered feature-oriented statistical method. Modularity possesses the advantage of solving different problems in parsing with corresponding mechanisms. Feature-oriented rule is able to express the complex lingual phenomena at the key point if needed. Evaluated on Penn Treebank corpus, we obtained 89.2% precision and 89.8% recall.展开更多
A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are p...A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are presented. By approaches of nonlinear analysis some solvability results of this equation and continuous perturbation properties of the relative solution sets are obtained, and some economic significance are illustrated by the remark.展开更多
Three groups of dynamic triaxial tests were performed for saturated Nanjing fine sand subjected to uniform cyclic loading. The tested curves of the excess pore water pressure （EPWP） ratio variation with the ratio of...Three groups of dynamic triaxial tests were performed for saturated Nanjing fine sand subjected to uniform cyclic loading. The tested curves of the excess pore water pressure （EPWP） ratio variation with the ratio of the number of cycles are provided. The concept of the EPWP increment ratio is introduced and two new concepts of the effective dynamic shear stress ratio and the log decrement of effective stress are defined. It is found that the development of the EPWP increment ratio can be divided into three stages： descending, stable and ascending. Furthermore, at the stable and ascending stages, a satisfactory linear relationship is obtained between the accumulative EPWP increment ratio and natural logarithm of the effective dynamic shear stress ratio. Accordingly, the EPWP increment ratio at the number of cycles N has been deduced that is proportional to the log decrement of effective stress at the cycle number N-l, but is independent of the cyclic stress amplitude. Based on the analysis, a new EPWP increment model for saturated Nanjing fine sand is developed from tested data fitting, which provides a better prediction of the curves of EPWP generation, the number of cycles required for initial liquefaction and the liquefaction resistance.展开更多
The spring (March-April-May) rainfall over northern China (SPRNC) is predicted by using the interannual increment approach. DY denotes the difference between the current year and previous years. The seasonal forecast ...The spring (March-April-May) rainfall over northern China (SPRNC) is predicted by using the interannual increment approach. DY denotes the difference between the current year and previous years. The seasonal forecast model for the DY of SPRNC is constructed based on the data that are taken from the 1965-2002 period (38 years), in which six predictors are available no later than the current month of February. This is favorable so that the seasonal forecasts can be made one month ahead. Then, SPRNC and the percentage anomaly of SPRNC are obtained by the predicted DY of SPRNC. The model performs well in the prediction of the inter-annual variation of the DY of SPRNC during 1965-2002, with a correlation coefficient between the predicted and observed DY of SPRNC of 0.87. This accounts for 76% of the total variance, with a low value for the average root mean square error (RMSE) of 20%. Both the results of the hindcast for the period of 2003-2010 (eight years) and the cross-validation test for the period of 1965-2009 (45 years) illustrate the good prediction capability of the model, with a small mean relative error of 10%, an RMSE of 17% and a high rate of coherence of 87.5% for the hindcasts of the percentage anomaly of SPRNC.展开更多
On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the ind...On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the industries of Henan Province and the industries of other regions. I summarize the characteristics of this method based on this as follows: when researching inter-regional economic link, the multi-region or two-region input-output model has prominent superiority, and we can conduct preliminary estimation on the multi-region input-output model using location quotient approach.展开更多
Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output ...Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output mechanism under which the change related to energy is surely transmitted to other industries. The price change thus incurred in all industries may adversely affect the realization of macroeconomic objective-maintaining prices at a stable level. It is, therefore, needed to conduct an empirical research related to the impact of price change in energy industry on that in other industries. According to the data coming from “China’s 2015 Input-Output Extension Table (42 Departments)” and four hypothetical basis, this article focuses on four energy sectors and analyzes how deeply the price change of them, by use of input-output model, affects that of other industrial products under five conditions where each of their price rises by 10% individually or simultaneously, and why such an influence occurs. The results show that the price rising of the energies in question leads to an upward growth in the prices of other industrial products, especially when their prices go up simultaneously. Besides, the price increase in the four energy sectors doesn’t influence other industries in an accumulation form but actually leads to a rollback in some of other industries. It is recommended to adopt diversified pricing strategies for different energy products, thus maximizing the value of each specific energy, and meanwhile achieving the goals of energy consumption reduction and price equilibrium.展开更多
Three series of sandbox modeling experiments were performed to study the fault-increment pattern in extensional basins. Experimental results showed that the tectonic action mode of boundaries and the shape of major bo...Three series of sandbox modeling experiments were performed to study the fault-increment pattern in extensional basins. Experimental results showed that the tectonic action mode of boundaries and the shape of major boundary faults control the formation and evolution of faults in extensional basins. In the process of extensional deformation, the increase in the number and length of faults was episodic, and every ＇episode＇ experienced three periods, strain-accumulation period, quick fault-increment period and strain-adjustment period. The more complex the shape of the boundary fault, the higher the strain increment each ＇episode＇ experienced. Different extensional modes resulted in different fault-increment patterns. The horizontal detachment extensional mode has the ＇linear＇ style of fault-increment pattern, while the extensional mode controlled by a listric fault has the ＇stepwise＇ style of fault-increment pattern, and the extensional mode controlled by a ramp-flat boundary fault has the ＇stepwise-linear＇ style of fault-increment pattern. These fault-increment patterns given above could provide a theoretical method of fault interpretation and fracture prediction in extensional basins.展开更多
Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the ...Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the index of＂ weighted value-added productivity ＂ by compiling non-competitive input-output tables which distinguish high-tech industries from traditional industries. The new method effectively avoids ＂statistical illusion＂ which stems from a biased focus on gross exports under intra-product specialization. The empirical study shows that since 1995, the status of China＇s high-tech industries has grown quickly as a result of enhanced labor productivity, but still lags behind those of major developed countries. In addition, the study also suggests that the status of China＇s high-tech industries has been over-estimated using the traditional gross export statistical method.展开更多
To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed ...To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.展开更多
Maximum Power Point Tracking (MPPT) is an important process in Photovoltaic (PV) systems because of the need to extract maximum power from PV panels used in these systems. Without the ability to track and have PV pane...Maximum Power Point Tracking (MPPT) is an important process in Photovoltaic (PV) systems because of the need to extract maximum power from PV panels used in these systems. Without the ability to track and have PV panels operate at its maximum power point (MPP) entails power losses;resulting in high cost since more panels will be required to provide specified energy needs. To achieve high efficiency and low cost, MPPT has therefore become an imperative in PV systems. In this study, an MPP tracker is modeled using the IC algorithm and its behavior under rapidly changing environmental conditions of temperature and irradiation levels is investigated. This algorithm, based on knowledge of the variation of the conductance of PV cells and the operating point with respect to the voltage and current of the panel calculates the slope of the power characteristics to determine the MPP as the peak of the curve. A simple circuit model of the DC-DC boost converter connected to a PV panel is used in the simulation;and the output of the boost converter is fed through a 3-phase inverter to an electricity grid. The model was simulated and tested using MATLAB/Simulink. Simulation results show the effectiveness of the IC algorithm for tracking the MPP in PV systems operating under rapidly changing temperatures and irradiations with a settling time of 2 seconds.展开更多
Background: Over the last decades, many forest simulators have been developed for the forests of individual European countries. The underlying growth models are usually based on national datasets of varying size, obta...Background: Over the last decades, many forest simulators have been developed for the forests of individual European countries. The underlying growth models are usually based on national datasets of varying size, obtained from National Forest Inventories or from long-term research plots. Many of these models include country-and location-specific predictors, such as site quality indices that may aggregate climate, soil properties and topography effects. Consequently, it is not sensible to compare such models among countries, and it is often impossible to apply models outside the region or country they were developed for. However, there is a clear need for more generically applicable but still locally accurate and climate sensitive simulators at the European scale, which requires the development of models that are applicable across the European continent. The purpose of this study is to develop tree diameter increment models that are applicable at the European scale, but still locally accurate. We compiled and used a dataset of diameter increment observations of over 2.3 million trees from 10 National Forest Inventories in Europe and a set of 99 potential explanatory variables covering forest structure, weather, climate, soil and nutrient deposition.Results: Diameter increment models are presented for 20 species/species groups. Selection of explanatory variables was done using a combination of forward and backward selection methods. The explained variance ranged from10% to 53% depending on the species. Variables related to forest structure(basal area of the stand and relative size of the tree) contributed most to the explained variance, but environmental variables were important to account for spatial patterns. The type of environmental variables included differed greatly among species.Conclusions: The presented diameter increment models are the first of their kind that are applicable at the European scale. This is an important step towards the development of a new generation of forest development simulators that can be applied at the European scale, but that are sensitive to variations in growing conditions and applicable to a wider range of management systems than before. This allows European scale but detailed analyses concerning topics like CO2 sequestration, wood mobilisation, long term impact of management, etc.展开更多
The method of compiling input-output models of science and technology was studied,and the application of input-output techniques in evaluating the progress of enterprise science and technology was discussed.And the mo...The method of compiling input-output models of science and technology was studied,and the application of input-output techniques in evaluating the progress of enterprise science and technology was discussed.And the models for determining direct,indirect and full contributions of the progress of enterprise science and technology have been set up which can be used to analyse and evaluate the direct,indirect and full benefits of the progress of enterprise science and technology.展开更多
基金supported in part by financial support from the National Key R&D Program of China(No.2023YFB3407003)the National Natural Science Foundation of China(No.52375378).
文摘A new analytical model for geometric size and forming force prediction in incremental flanging(IF)is presented in this work.The complex deformation characteristics of IF are considered in the modeling process,which can accurately describe the strain and stress states in IF.Based on strain analysis,the model can predict the material thickness distribution and neck height after IF.By considering contact area,strain characteristics,material thickness changes,and friction,the model can predict specific moments and corresponding values of maximum axial forming force and maximum horizontal forming force during IF.In addition,an IF experiment involving different tool diameters,flanging diameters,and opening hole diameters is conducted.On the basis of the experimental strain paths,the strain characteristics of different deformation zones are studied,and the stable strain ratio is quantitatively described through two dimensionless parameters:relative tool diameter and relative hole diameter.Then,the changing of material thickness and forming force in IF,and the variation of minimum material thickness,neck height,maximum axial forming force,and maximum horizontal forming force with flanging parameters are studied,and the reliability of the analytical model is verified in this process.Finally,the influence of the horizontal forming force on the tool design and the fluctuation of the forming force are explained.
基金supported by the National Natural Science Foundation of China(Grant Nos.12372100,12302126,and 12302141)the China Postdoctoral Science Foundation(Grant No.2023M732799)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.xzy012024020)Sihe Wang also thanks the support from the China Scholarship Council(CSC).
文摘In this paper,an incremental contact model is developed for the elastic self-affine fractal rough surfaces under plane strain condition.The contact between a rough surface and a rigid plane is simplified by the accumulation of identical line contacts with half-width given by the truncated area divided by the contact patch number at varying heights.Based on the contact stiffness of two-dimensional flat punch,the total stiffness of rough surface is estimated,and then the normal load is calculated by an incremental method.For various rough surfaces,the approximately linear load-area relationships predicted by the proposed model agree well with the results of finite element simulations.It is found that the real average contact pressure depends significantly on profile properties.
文摘Fault diagnosis is an important measure to ensure the safety of production, and all kinds of fault diagnosis methods are of importance in actual production process. However, the complexity and uncertainty of production process often lead to the changes of data distribution and the emergence of new fault classes, and the number of the new fault classes is unpredictable. The reconstruction of the fault diagnosis model and the identification of new fault classes have become core issues under the circumstances. This paper presents a fault diagnosis method based on model transfer learning and the main contributions of the paper are as follows: 1) An incremental model transfer fault diagnosis method is proposed to reconstruct the new process diagnosis model. 2) Breaking the limit of existing method that the new process can only have one more class of faults than the old process, this method can identify M faults more in the new process with the thought of incremental learning. 3) The method offers a solution to a series of problems caused by the increase of fault classes. Experiments based on Tennessee-Eastman process and ore grinding classification process demonstrate the effectiveness and the feasibility of the method.
基金Item Sponsored by National Natural Science Foundation of China(61290323,61333007,61473064)Fundamental Research Funds for Central Universities of China(N130108001)+1 种基金National High Technology Research and Development Program of China(2015AA043802)General Project on Scientific Research for Education Department of Liaoning Province of China(L20150186)
文摘Molten iron temperature as well as Si, P, and S contents is the most essential molten iron quality （MIQ） indices in the blast furnace （BF） ironmaking, which requires strict monitoring during the whole ironmaking production. However, these MIQ parameters are difficult to be directly measured online, and large-time delay exists in off-line analysis through laboratory sampling. Focusing on the practical challenge, a data-driven modeling method was presented for the prediction of MIQ using the improved muhivariable incremental random vector functional-link net- works （M-I-RVFLNs）. Compared with the conventional random vector functional-link networks （RVFLNs） and the online sequential RVFLNs, the M-I-RVFLNs have solved the problem of deciding the optimal number of hidden nodes and overcome the overfitting problems. Moreover, the proposed M I RVFLNs model has exhibited the potential for multivariable prediction of the MIQ and improved the terminal condition for the multiple-input multiple-out- put （MIMO） dynamic system, which is suitable for the BF ironmaking process in practice. Ultimately, industrial experiments and contrastive researches have been conducted on the BF No. 2 in Liuzhou Iron and Steel Group Co. Ltd. of China using the proposed method, and the results demonstrate that the established model produces better estima ting accuracy than other MIQ modeling methods.
基金the National Key Research and Development Program(No.2018YFB1307005)the Smart Medical Project of Shanghai Municipal Commission of Health and Family Planning(No.2018ZHYL0226)。
文摘The objective of this study is to construct a multi-department symptom-based automatic diagnosis model.However,it is dificult to establish a model to classify plenty of diseases and collect thousands of disease-symptom datasets simultaneously.Inspired by the thought of"knowledge graph is model",this study proposes to build an experience-infused knowledge model by continuously learning the experiential knowledge from data,and incrementally injecting it into the knowledge graph.Therefore,incremental learning and injection are used to solve the data collection problem,and the knowledge graph is modeled and containerized to solve the large-scale multi-classification problems.First,an entity linking method is designed and a heterogeneous knowledge graph is constructed by graph fusion.Then,an adaptive neural network model is constructed for each dataset,and the data is used for statistical initialization and model training.Finally,the weights and biases of the learned neural network model are updated to the knowledge graph.It is worth noting that for the incremental process,we consider both the data and class increments.We evaluate the diagnostic effectiveness of the model on the current dataset and the anti-forgetting ability on the historical dataset after class increment on three public datasets.Compared with the classical model,the proposed model improves the diagnostic accuracy of the three datasets by 5%,2%,and 15%on average,respectively.Meanwhile,the model under incremental learning has a better ability to resist forgetting.
基金the National Basic Research Program of China under Natural contract Nos 2007CB816001 and 2006CB400603Natinal Natural Science Foundation of China under contract Nos 40346027 and 40676008the China"908"-Project under Grant No.908-02-01-03 and 908-IC-I-13
文摘Four-dimensional variational(4D-VAR) data assimilation method is a perfect data assimilation solution in theory, but the computational issue is quite difficult in operational implementation.The incremental 4D-VAR assimilation scheme is set up in order to reduce the computational cost. It is shown that the accuracy of the observations, the length of the assimilation window and the choice of the first guess have an important influence on the assimilation outcome through the contrast experiment. Compared with the standard 4D-VAR assimilation scheme, the incremental 4D-VAR assimilation scheme shows its advantage in the computation speed through an assimilation experiment.
基金Under the auspices of National High Technology Research and Development Program of China (No.2007AA12Z242)
文摘The technique of incremental updating,which can better guarantee the real-time situation of navigational map,is the developing orientation of navigational road network updating.The data center of vehicle navigation system is in charge of storing incremental data,and the spatio-temporal data model for storing incremental data does affect the efficiency of the response of the data center to the requirements of incremental data from the vehicle terminal.According to the analysis on the shortcomings of several typical spatio-temporal data models used in the data center and based on the base map with overlay model,the reverse map with overlay model (RMOM) was put forward for the data center to make rapid response to incremental data request.RMOM supports the data center to store not only the current complete road network data,but also the overlays of incremental data from the time when each road network changed to the current moment.Moreover,the storage mechanism and index structure of the incremental data were designed,and the implementation algorithm of RMOM was developed.Taking navigational road network in Guangzhou City as an example,the simulation test was conducted to validate the efficiency of RMOM.Results show that the navigation database in the data center can response to the requirements of incremental data by only one query with RMOM,and costs less time.Compared with the base map with overlay model,the data center does not need to temporarily overlay incremental data with RMOM,so time-consuming of response is significantly reduced.RMOM greatly improves the efficiency of response and provides strong support for the real-time situation of navigational road network.
基金Project supported by the National Natural Science Foundation of China (No. 10272079).
文摘Warp yarns and weft yarns of plain woven fabric are the principal axes of mate- rial of fabric. They are orthogonal in their original con?guration, but are obliquely crisscross in deformed con?guration in general. In this paper the expressions of incremental components of strain tensor are derived, the non-linear model of woven fabric is linearized physically and its geometric non-linearity survives. The convenience of determining the total deformation is shown by the choice of the coordinate system of the principal axes of the material, with the convergence of the incremental methods illustrated by examples. This incremental model furnishes a basis for numerical simulations of fabric draping and wrinkling based on the micro-mechanical model of fabric.
文摘In this paper, we present a modular incremental statistical model for English full parsing. Unlike other full parsing approaches in which the analysis of the sentence is a uniform process, our model separates the full parsing into shallow parsing and sentence skeleton parsing. In shallow parsing, we finish POS tagging, Base NP identification, prepositional phrase attachment and subordinate clause identification. In skeleton parsing, we use a layered feature-oriented statistical method. Modularity possesses the advantage of solving different problems in parsing with corresponding mechanisms. Feature-oriented rule is able to express the complex lingual phenomena at the key point if needed. Evaluated on Penn Treebank corpus, we obtained 89.2% precision and 89.8% recall.
文摘A class of nonlinear and continuous type Leontief model and its corresponding conditional input-output equation are introduced, and two basic problems under the so called positive or negative boundary assumption are presented. By approaches of nonlinear analysis some solvability results of this equation and continuous perturbation properties of the relative solution sets are obtained, and some economic significance are illustrated by the remark.
基金Key Research Project of National Natural Science Foundation of China Under Grant No.90715018National Basic Research Program of China Under Grant No.2007CB714200the Special Fund for the Commonweal Industry of China Under Grant No.200808022
文摘Three groups of dynamic triaxial tests were performed for saturated Nanjing fine sand subjected to uniform cyclic loading. The tested curves of the excess pore water pressure （EPWP） ratio variation with the ratio of the number of cycles are provided. The concept of the EPWP increment ratio is introduced and two new concepts of the effective dynamic shear stress ratio and the log decrement of effective stress are defined. It is found that the development of the EPWP increment ratio can be divided into three stages： descending, stable and ascending. Furthermore, at the stable and ascending stages, a satisfactory linear relationship is obtained between the accumulative EPWP increment ratio and natural logarithm of the effective dynamic shear stress ratio. Accordingly, the EPWP increment ratio at the number of cycles N has been deduced that is proportional to the log decrement of effective stress at the cycle number N-l, but is independent of the cyclic stress amplitude. Based on the analysis, a new EPWP increment model for saturated Nanjing fine sand is developed from tested data fitting, which provides a better prediction of the curves of EPWP generation, the number of cycles required for initial liquefaction and the liquefaction resistance.
基金Innovation Key Program of the Chinese Academy of Sciences(KZCX2-YW-QN202)Global Climate Change Research National Basic Research Program of China(2010CB950304)+1 种基金Innovation Key Program of the Chinese Academy of Sciences (KZCX2-YW-BR-14)Special Fund for Public Welfare Industry (Meteorology) (GYHY200906018)
文摘The spring (March-April-May) rainfall over northern China (SPRNC) is predicted by using the interannual increment approach. DY denotes the difference between the current year and previous years. The seasonal forecast model for the DY of SPRNC is constructed based on the data that are taken from the 1965-2002 period (38 years), in which six predictors are available no later than the current month of February. This is favorable so that the seasonal forecasts can be made one month ahead. Then, SPRNC and the percentage anomaly of SPRNC are obtained by the predicted DY of SPRNC. The model performs well in the prediction of the inter-annual variation of the DY of SPRNC during 1965-2002, with a correlation coefficient between the predicted and observed DY of SPRNC of 0.87. This accounts for 76% of the total variance, with a low value for the average root mean square error (RMSE) of 20%. Both the results of the hindcast for the period of 2003-2010 (eight years) and the cross-validation test for the period of 1965-2009 (45 years) illustrate the good prediction capability of the model, with a small mean relative error of 10%, an RMSE of 17% and a high rate of coherence of 87.5% for the hindcasts of the percentage anomaly of SPRNC.
基金Supported by Project of Henan Provincial Department of Science and Technology (112400410017)Project of Henan Provincial Department of Education (2010-QN-008)
文摘On the basis of input-output table of Henan Province and China in 2007, this paper advances a simple method of constructing two-region input-output model using MRIO model, to research the economic link between the industries of Henan Province and the industries of other regions. I summarize the characteristics of this method based on this as follows: when researching inter-regional economic link, the multi-region or two-region input-output model has prominent superiority, and we can conduct preliminary estimation on the multi-region input-output model using location quotient approach.
文摘Energy has laid material foundation for human society during its development. Meanwhile, any change of price in the energy industry may influence social production and people’s life at all levels via an input-output mechanism under which the change related to energy is surely transmitted to other industries. The price change thus incurred in all industries may adversely affect the realization of macroeconomic objective-maintaining prices at a stable level. It is, therefore, needed to conduct an empirical research related to the impact of price change in energy industry on that in other industries. According to the data coming from “China’s 2015 Input-Output Extension Table (42 Departments)” and four hypothetical basis, this article focuses on four energy sectors and analyzes how deeply the price change of them, by use of input-output model, affects that of other industrial products under five conditions where each of their price rises by 10% individually or simultaneously, and why such an influence occurs. The results show that the price rising of the energies in question leads to an upward growth in the prices of other industrial products, especially when their prices go up simultaneously. Besides, the price increase in the four energy sectors doesn’t influence other industries in an accumulation form but actually leads to a rollback in some of other industries. It is recommended to adopt diversified pricing strategies for different energy products, thus maximizing the value of each specific energy, and meanwhile achieving the goals of energy consumption reduction and price equilibrium.
文摘Three series of sandbox modeling experiments were performed to study the fault-increment pattern in extensional basins. Experimental results showed that the tectonic action mode of boundaries and the shape of major boundary faults control the formation and evolution of faults in extensional basins. In the process of extensional deformation, the increase in the number and length of faults was episodic, and every ＇episode＇ experienced three periods, strain-accumulation period, quick fault-increment period and strain-adjustment period. The more complex the shape of the boundary fault, the higher the strain increment each ＇episode＇ experienced. Different extensional modes resulted in different fault-increment patterns. The horizontal detachment extensional mode has the ＇linear＇ style of fault-increment pattern, while the extensional mode controlled by a listric fault has the ＇stepwise＇ style of fault-increment pattern, and the extensional mode controlled by a ramp-flat boundary fault has the ＇stepwise-linear＇ style of fault-increment pattern. These fault-increment patterns given above could provide a theoretical method of fault interpretation and fracture prediction in extensional basins.
文摘Based on a refined ＂non-competitive input-output model,＂ this paper proposes a new framework for analyzing the status of a country＇s high-tech industries in the international division of labor, i.e. calculates the index of＂ weighted value-added productivity ＂ by compiling non-competitive input-output tables which distinguish high-tech industries from traditional industries. The new method effectively avoids ＂statistical illusion＂ which stems from a biased focus on gross exports under intra-product specialization. The empirical study shows that since 1995, the status of China＇s high-tech industries has grown quickly as a result of enhanced labor productivity, but still lags behind those of major developed countries. In addition, the study also suggests that the status of China＇s high-tech industries has been over-estimated using the traditional gross export statistical method.
文摘To promote sustainability, it has become increasingly vital to properly account material and energy flows in industrial production processes. Therefore, a generic process-level input-output （IO） model was developed to provide an integrated energy （material） accounting and analysis approach for industrial production processes. By extending the existing processlevel IO models, the production, usage, export and loss of by-products were explicitly considered in the proposed IO model. Moreover, the by-products allocation procedures were incorporated into the proposed IO model to reflect individual contributions of products to energy consumption. Finally, the proposed model enabled calculating embodied energy of main products and total energy consumption under hierarchical accounting scope. Plant managers, energy management consultants, governmental officials and academic researchers could use this input-output model to account material and energy flows, thus calculating energy consumption indicators of a production process with their specific system boundary requirements. The accounting results could be further used for energy labeling, identifying bottlenecks of production activities, evaluating industrial symbiosis effects, improving materials and energy utilization efficiency, etc. The model could also be used as a planning tool to determine the effect that a particular change of technology and supply chains may have on the industrial production processes. The proposed model was tested and applied in a real integrated steel mill, which also provided the reference results for related researches. At last, some concepts, computational issues and limi- tations of the proposed model were discussed.
文摘Maximum Power Point Tracking (MPPT) is an important process in Photovoltaic (PV) systems because of the need to extract maximum power from PV panels used in these systems. Without the ability to track and have PV panels operate at its maximum power point (MPP) entails power losses;resulting in high cost since more panels will be required to provide specified energy needs. To achieve high efficiency and low cost, MPPT has therefore become an imperative in PV systems. In this study, an MPP tracker is modeled using the IC algorithm and its behavior under rapidly changing environmental conditions of temperature and irradiation levels is investigated. This algorithm, based on knowledge of the variation of the conductance of PV cells and the operating point with respect to the voltage and current of the panel calculates the slope of the power characteristics to determine the MPP as the peak of the curve. A simple circuit model of the DC-DC boost converter connected to a PV panel is used in the simulation;and the output of the boost converter is fed through a 3-phase inverter to an electricity grid. The model was simulated and tested using MATLAB/Simulink. Simulation results show the effectiveness of the IC algorithm for tracking the MPP in PV systems operating under rapidly changing temperatures and irradiations with a settling time of 2 seconds.
基金funded by the SIMWOOD project(Grant Agreement No.613762)of the EU H2020 Programmefacilitated by the Alter For project(Grant Agreement No.676754)+3 种基金the VERIFY project(Grant Agreement No.776810)Co-funding was received from the topsector Agri&Food under No.AF-EU-15002The Dutch National Forest Inventory is funded by the Ministry of Economic AffairsThe regional forest inventory in Piemonte was produced with the support of EU structural funds
文摘Background: Over the last decades, many forest simulators have been developed for the forests of individual European countries. The underlying growth models are usually based on national datasets of varying size, obtained from National Forest Inventories or from long-term research plots. Many of these models include country-and location-specific predictors, such as site quality indices that may aggregate climate, soil properties and topography effects. Consequently, it is not sensible to compare such models among countries, and it is often impossible to apply models outside the region or country they were developed for. However, there is a clear need for more generically applicable but still locally accurate and climate sensitive simulators at the European scale, which requires the development of models that are applicable across the European continent. The purpose of this study is to develop tree diameter increment models that are applicable at the European scale, but still locally accurate. We compiled and used a dataset of diameter increment observations of over 2.3 million trees from 10 National Forest Inventories in Europe and a set of 99 potential explanatory variables covering forest structure, weather, climate, soil and nutrient deposition.Results: Diameter increment models are presented for 20 species/species groups. Selection of explanatory variables was done using a combination of forward and backward selection methods. The explained variance ranged from10% to 53% depending on the species. Variables related to forest structure(basal area of the stand and relative size of the tree) contributed most to the explained variance, but environmental variables were important to account for spatial patterns. The type of environmental variables included differed greatly among species.Conclusions: The presented diameter increment models are the first of their kind that are applicable at the European scale. This is an important step towards the development of a new generation of forest development simulators that can be applied at the European scale, but that are sensitive to variations in growing conditions and applicable to a wider range of management systems than before. This allows European scale but detailed analyses concerning topics like CO2 sequestration, wood mobilisation, long term impact of management, etc.
文摘The method of compiling input-output models of science and technology was studied,and the application of input-output techniques in evaluating the progress of enterprise science and technology was discussed.And the models for determining direct,indirect and full contributions of the progress of enterprise science and technology have been set up which can be used to analyse and evaluate the direct,indirect and full benefits of the progress of enterprise science and technology.
