An anti-radiation structure of In P-based high electron mobility transistor(HEMT) has been proposed and optimized with double Si-doped planes. The additional Si-doped plane under channel layer has made a huge promotio...An anti-radiation structure of In P-based high electron mobility transistor(HEMT) has been proposed and optimized with double Si-doped planes. The additional Si-doped plane under channel layer has made a huge promotion in channel current, transconductance, current gain cut-off frequency, and maximum oscillation frequency of In P-based HEMTs. Moreover, direct current(DC) and radio frequency(RF) characteristic properties and their reduction rates have been compared in detail between single Si-doped and double Si-doped structures after 75-keV proton irradiation with dose of 5× 10^(11) cm^(-2),1× 10^(12) cm^(-2), and 5× 10^(12) cm^(-2). DC and RF characteristics for both structures are observed to decrease gradually as irradiation dose rises, which particularly show a drastic drop at dose of 5× 10^(12) cm^(-2). Besides, characteristic degradation degree of the double Si-doped structure is significantly lower than that of the single Si-doped structure, especially at large proton irradiation dose. The enhancement of proton radiation tolerance by the insertion of another Si-doped plane could be accounted for the tremendously increased native carriers, which are bound to weaken substantially the carrier removal effect by irradiation-induced defects.展开更多
The performance damage mechanism of InP-based high electron mobility transistors(HEMTs) after proton irradiation has been investigated comprehensively through induced defects.The effects of the defect type, defect ene...The performance damage mechanism of InP-based high electron mobility transistors(HEMTs) after proton irradiation has been investigated comprehensively through induced defects.The effects of the defect type, defect energy level with respect to conduction band ET, and defect concentration on the transfer and output characteristics of the device are discussed based on hydrodynamic model and Shockley–Read–Hall recombination model.The results indicate that only acceptorlike defects have a significant influence on device operation.Meanwhile, as defect energy level ETshifts away from conduction band, the drain current decreases gradually and finally reaches a saturation value with ETabove 0.5 eV.This can be attributed to the fact that at sufficient deep level, acceptor-type defects could not be ionized any more.Additionally,the drain current and transconductance degrade more severely with larger acceptor concentration.These changes of the electrical characteristics with proton radiation could be accounted for by the electron density reduction in the channel region from induced acceptor-like defects.展开更多
The InGaAs/InAIAs/InP high electron mobility transistor （HEM：F） structures with lattice-matched and pseudo- morphic channels are grown by gas source molecular beam epitaxy. Effects of Si ^-doping condition and grow...The InGaAs/InAIAs/InP high electron mobility transistor （HEM：F） structures with lattice-matched and pseudo- morphic channels are grown by gas source molecular beam epitaxy. Effects of Si ^-doping condition and growth interruption on the electrical properties are investigated by changing the Si-cell temperature, doping time and growth process. It is found that the optimal Si ^-doping concentration （Nd） is about 5.0 x 1012 cm-2 and the use of growth interruption has a dramatic effect on the improvement of electrical properties. The material structure and crystal interface are analyzed by secondary ion mass spectroscopy and high resolution transmission elec- tron microscopy. An InGaAs/InAiAs/InP HEMT device with a gate length of lOOnm is fabricated. The device presents good pinch-off characteristics and the kink-effect of the device is trifling. In addition, the device exhibits fT = 249 GHa and fmax 〉 400 GHz.展开更多
The T-gate stem height of In Al As/In Ga As In P-based high electron mobility transistor(HEMT) is increased from165 nm to 250 nm. The influences of increasing the gate stem height on the direct current(DC) and radio f...The T-gate stem height of In Al As/In Ga As In P-based high electron mobility transistor(HEMT) is increased from165 nm to 250 nm. The influences of increasing the gate stem height on the direct current(DC) and radio frequency(RF)performances of device are investigated. A 120-nm-long gate, 250-nm-high gate stem device exhibits a higher threshold voltage(Vth) of 60 m V than a 120-nm-long gate devices with a short gate stem, caused by more Pt distributions on the gate foot edges of the high Ti/Pt/Au gate. The Pt distribution in Schottky contact metal is found to increase with the gate stem height or the gate length increasing, and thus enhancing the Schottky barrier height and expanding the gate length,which can be due to the increased internal tensile stress of Pt. The more Pt distributions for the high gate stem device also lead to more obvious Pt sinking, which reduces the distance between the gate and the In Ga As channel so that the transconductance(gm) of the high gate stem device is 70 m S/mm larger than that of the short stem device. As for the RF performances,the gate extrinsic parasitic capacitance decreases and the intrinsic transconductance increases after the gate stem height has been increased, so the RF performances of device are obviously improved. The high gate stem device yields a maximum ft of 270 GHz and fmax of 460 GHz, while the short gate stem device has a maximum ft of 240 GHz and the fmax of 370 GHz.展开更多
The structural and optical characteristics of InP-based compressively strained InGaAs quantum wells have been significantly improved by using gas source molecular beam epitaxy grown InAs/Ino.53Ga0.47As digital alloy t...The structural and optical characteristics of InP-based compressively strained InGaAs quantum wells have been significantly improved by using gas source molecular beam epitaxy grown InAs/Ino.53Ga0.47As digital alloy triangular well layers and tensile Ino.53Ga0.47As/InAiGaAs digital alloy barrier layers. The x-ray diffraction and transmission electron microscope characterisations indicate that the digital alloy structures present favourable lattice quality. Photo- luminescence （PL） and electroluminescence （EL） measurements show that the use of digital alloy barriers offers better optical characteristics than that of conventional random alloy barriers. A significantly improved PL signal of around 2.1μm at 300 K and an EL signal of around 1.95μm at 100 K have been obtained.展开更多
InP-based high electron mobility transistors（HEMTs） will be affected by protons from different directions in space radiation applications. The proton irradiation effects on InAlAs/InGaAs hetero-junction structures o...InP-based high electron mobility transistors（HEMTs） will be affected by protons from different directions in space radiation applications. The proton irradiation effects on InAlAs/InGaAs hetero-junction structures of InP-based HEMTs are studied at incident angles ranging from 0 to 89.9° by SRIM software. With the increase of proton incident angle, the change trend of induced vacancy defects in the InAlAs/InGaAs hetero-junction region is consistent with the vacancy energy loss trend of incident protons. Namely, they both have shown an initial increase, followed by a decrease after incident angle has reached 30°. Besides, the average range and ultimate stopping positions of incident protons shift gradually from buffer layer to hetero-junction region, and then go up to gate metal. Finally, the electrical characteristics of InP-based HEMTs are investigated after proton irradiation at different incident angles by Sentaurus-TCAD. The induced vacancy defects are considered self-consistently through solving Poisson＇s and current continuity equations. Consequently, the extrinsic transconductance, pinch-off voltage and channel current demonstrate the most serious degradation at the incident angle of 30？, which can be accounted for the most severe carrier sheet density reduction under this condition.展开更多
The introduction of strain In_(x)Ga_(1-x)As channel with high In content increases the confinement of the two-dimensional electron gas(2DEG)and further improves the high-frequency performance of InGaAs/InAlAs/InP HEMT...The introduction of strain In_(x)Ga_(1-x)As channel with high In content increases the confinement of the two-dimensional electron gas(2DEG)and further improves the high-frequency performance of InGaAs/InAlAs/InP HEMTs.The effect of In_(x)Ga_(1-x)As channel with different In contents on electron irradiation tolerance of InP-based HEMT structures in terms of 2DEG mobility and density has been investigated.The experiment results show that,after the same high electron irradiation dose,the 2DEG mobility and density in InP-based HEMT structures with strain In_(x)Ga_(1-x)As(x>0.53)channel decrease more dramatically than that without strain In_(0.53)Ga_(0.47)As channel.Moreover,the degradation of 2DEG mobility and density becomes more severe as the increase of In content and strain in the In_(x)Ga_(1-x)As channel.The research results can provide some suggestions for the design of radiation-resistant InP-based HEMTs.展开更多
A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fab...A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fabricated devices show a flattened spectral response with a broadened 3-dB bandwidth up to 3.5 nm, interchan- nel non-uniformity of 〈0. 7dB and excellent match to the simulation results.展开更多
The performance of red InP and blue ZnTeSe-based quantum dots(QDs)and corresponding QD light emitting diodes(QLEDs)has already been improved significantly,whose external quantum efficiencies(EQEs)and luminances have e...The performance of red InP and blue ZnTeSe-based quantum dots(QDs)and corresponding QD light emitting diodes(QLEDs)has already been improved significantly,whose external quantum efficiencies(EQEs)and luminances have exceeded 20%and 80000 cd m-2,respectively.However,the inferior performance of the green InP-based device hinders the commercialization of full-color Cd-free QLED technology.The ease of oxidation of the highly reactive InP cores leads to high non-radiative recombination and poor photoluminescence quantum yield(PL QY)of the InP-based core/shell QDs,limiting the performance of the relevant QLEDs.Here,we proposed a fluoride-free synthesis strategy to in-situ passivate the InP cores,in which zinc myristate reacted with phosphine dangling bonds to form Zn–P protective layer and protect InP cores from the water and oxygen in the environment.The resultant InP/ZnSe/ZnS core/shell QDs demonstrated a high PL QY of 91%.The corresponding green-emitting electroluminescence devices exhibited a maximum EQE of 12.74%,along with a luminance of over 175000 cd m^(-2)and a long T50@100 cd m^(-2)lifetime of over 20000 h.展开更多
A monolithic integrated few-mode transmitter comprising of two directly modulated distributed feedback lasers and a multimode-interference-coupler-based mode converter-multiplexer with 66%mode conversion efficiency wa...A monolithic integrated few-mode transmitter comprising of two directly modulated distributed feedback lasers and a multimode-interference-coupler-based mode converter-multiplexer with 66%mode conversion efficiency was designed and demonstrated.A fundamental TE0 mode and a first-order TE1 mode were successfully generated from the transmitter,with the output power of 4 and 5.5 mW at a pump current of around 150 mA,respectively,at the common output port.The small signal modulation bandwidth of the TE0 and TE1 channels reached 17.4 and 14.7 GHz,respectively.Error-free 2×10^(-9)bit∕s direct modulation of the two-mode transmitter was demonstrated,with a power penalty of 4.3 dB between the TE0 mode and the TE1 mode at the bit error rate of 1×10^(-9).展开更多
Direct current（DC） and radio frequency（RF） performances of InP-based high electron mobility transistors（HEMTs）are investigated by Sentaurus TCAD. The physical models including hydrodynamic transport model, Shock...Direct current（DC） and radio frequency（RF） performances of InP-based high electron mobility transistors（HEMTs）are investigated by Sentaurus TCAD. The physical models including hydrodynamic transport model, Shockley–Read–Hall recombination, Auger recombination, radiative recombination, density gradient model and high field-dependent mobility are used to characterize the devices. The simulated results and measured results about DC and RF performances are compared, showing that they are well matched. However, the slight differences in channel current and pinch-off voltage may be accounted for by the surface defects resulting from oxidized InAlAs material in the gate-recess region. Moreover,the simulated frequency characteristics can be extrapolated beyond the test equipment limitation of 40 GHz, which gives a more accurate maximum oscillation frequency( f;) of 385 GHz.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11775191,61404115,61434006,and 11475256)the Promotion Funding for Excellent Young Backbone Teacher of Henan Province,China(Grant No.2019GGJS017)。
文摘An anti-radiation structure of In P-based high electron mobility transistor(HEMT) has been proposed and optimized with double Si-doped planes. The additional Si-doped plane under channel layer has made a huge promotion in channel current, transconductance, current gain cut-off frequency, and maximum oscillation frequency of In P-based HEMTs. Moreover, direct current(DC) and radio frequency(RF) characteristic properties and their reduction rates have been compared in detail between single Si-doped and double Si-doped structures after 75-keV proton irradiation with dose of 5× 10^(11) cm^(-2),1× 10^(12) cm^(-2), and 5× 10^(12) cm^(-2). DC and RF characteristics for both structures are observed to decrease gradually as irradiation dose rises, which particularly show a drastic drop at dose of 5× 10^(12) cm^(-2). Besides, characteristic degradation degree of the double Si-doped structure is significantly lower than that of the single Si-doped structure, especially at large proton irradiation dose. The enhancement of proton radiation tolerance by the insertion of another Si-doped plane could be accounted for the tremendously increased native carriers, which are bound to weaken substantially the carrier removal effect by irradiation-induced defects.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11775191,61404115,61434006,and 11475256)the Development Fund for Outstanding Young Teachers in Zhengzhou University of China(Grant No.1521317004)the Doctoral Student Overseas Study Program of Zhengzhou University,China
文摘The performance damage mechanism of InP-based high electron mobility transistors(HEMTs) after proton irradiation has been investigated comprehensively through induced defects.The effects of the defect type, defect energy level with respect to conduction band ET, and defect concentration on the transfer and output characteristics of the device are discussed based on hydrodynamic model and Shockley–Read–Hall recombination model.The results indicate that only acceptorlike defects have a significant influence on device operation.Meanwhile, as defect energy level ETshifts away from conduction band, the drain current decreases gradually and finally reaches a saturation value with ETabove 0.5 eV.This can be attributed to the fact that at sufficient deep level, acceptor-type defects could not be ionized any more.Additionally,the drain current and transconductance degrade more severely with larger acceptor concentration.These changes of the electrical characteristics with proton radiation could be accounted for by the electron density reduction in the channel region from induced acceptor-like defects.
基金Supported by the National Natural Science Foundation of China under Grant No 61434006
文摘The InGaAs/InAIAs/InP high electron mobility transistor （HEM：F） structures with lattice-matched and pseudo- morphic channels are grown by gas source molecular beam epitaxy. Effects of Si ^-doping condition and growth interruption on the electrical properties are investigated by changing the Si-cell temperature, doping time and growth process. It is found that the optimal Si ^-doping concentration （Nd） is about 5.0 x 1012 cm-2 and the use of growth interruption has a dramatic effect on the improvement of electrical properties. The material structure and crystal interface are analyzed by secondary ion mass spectroscopy and high resolution transmission elec- tron microscopy. An InGaAs/InAiAs/InP HEMT device with a gate length of lOOnm is fabricated. The device presents good pinch-off characteristics and the kink-effect of the device is trifling. In addition, the device exhibits fT = 249 GHa and fmax 〉 400 GHz.
基金Project supported by the National Natural Science Foundation of China(Grant No.61434006)。
文摘The T-gate stem height of In Al As/In Ga As In P-based high electron mobility transistor(HEMT) is increased from165 nm to 250 nm. The influences of increasing the gate stem height on the direct current(DC) and radio frequency(RF)performances of device are investigated. A 120-nm-long gate, 250-nm-high gate stem device exhibits a higher threshold voltage(Vth) of 60 m V than a 120-nm-long gate devices with a short gate stem, caused by more Pt distributions on the gate foot edges of the high Ti/Pt/Au gate. The Pt distribution in Schottky contact metal is found to increase with the gate stem height or the gate length increasing, and thus enhancing the Schottky barrier height and expanding the gate length,which can be due to the increased internal tensile stress of Pt. The more Pt distributions for the high gate stem device also lead to more obvious Pt sinking, which reduces the distance between the gate and the In Ga As channel so that the transconductance(gm) of the high gate stem device is 70 m S/mm larger than that of the short stem device. As for the RF performances,the gate extrinsic parasitic capacitance decreases and the intrinsic transconductance increases after the gate stem height has been increased, so the RF performances of device are obviously improved. The high gate stem device yields a maximum ft of 270 GHz and fmax of 460 GHz, while the short gate stem device has a maximum ft of 240 GHz and the fmax of 370 GHz.
基金supported by the National Natural Science Foundation of China (Grant No. 60876034)the National Basic Research Program of China (Grant No. 2006CB604903)
文摘The structural and optical characteristics of InP-based compressively strained InGaAs quantum wells have been significantly improved by using gas source molecular beam epitaxy grown InAs/Ino.53Ga0.47As digital alloy triangular well layers and tensile Ino.53Ga0.47As/InAiGaAs digital alloy barrier layers. The x-ray diffraction and transmission electron microscope characterisations indicate that the digital alloy structures present favourable lattice quality. Photo- luminescence （PL） and electroluminescence （EL） measurements show that the use of digital alloy barriers offers better optical characteristics than that of conventional random alloy barriers. A significantly improved PL signal of around 2.1μm at 300 K and an EL signal of around 1.95μm at 100 K have been obtained.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11775191,61404115,61434006,and 11475256)the Program for Innovative Research Team(in Science and Technology)in University of Henan Province,China(Grant No.18IRTSTHN016)the Development Fund for Outstanding Young Teachers in Zhengzhou University of China(Grant No.1521317004)
文摘InP-based high electron mobility transistors（HEMTs） will be affected by protons from different directions in space radiation applications. The proton irradiation effects on InAlAs/InGaAs hetero-junction structures of InP-based HEMTs are studied at incident angles ranging from 0 to 89.9° by SRIM software. With the increase of proton incident angle, the change trend of induced vacancy defects in the InAlAs/InGaAs hetero-junction region is consistent with the vacancy energy loss trend of incident protons. Namely, they both have shown an initial increase, followed by a decrease after incident angle has reached 30°. Besides, the average range and ultimate stopping positions of incident protons shift gradually from buffer layer to hetero-junction region, and then go up to gate metal. Finally, the electrical characteristics of InP-based HEMTs are investigated after proton irradiation at different incident angles by Sentaurus-TCAD. The induced vacancy defects are considered self-consistently through solving Poisson＇s and current continuity equations. Consequently, the extrinsic transconductance, pinch-off voltage and channel current demonstrate the most serious degradation at the incident angle of 30？, which can be accounted for the most severe carrier sheet density reduction under this condition.
基金National Natural Science Foundation of China(11705277)Science and Technology Research Project of Hubei Provincial Department of Education(Q20222607)Graduate Quality Engineering Support Project of Hubei University of Arts and Science(YZ3202405)。
文摘The introduction of strain In_(x)Ga_(1-x)As channel with high In content increases the confinement of the two-dimensional electron gas(2DEG)and further improves the high-frequency performance of InGaAs/InAlAs/InP HEMTs.The effect of In_(x)Ga_(1-x)As channel with different In contents on electron irradiation tolerance of InP-based HEMT structures in terms of 2DEG mobility and density has been investigated.The experiment results show that,after the same high electron irradiation dose,the 2DEG mobility and density in InP-based HEMT structures with strain In_(x)Ga_(1-x)As(x>0.53)channel decrease more dramatically than that without strain In_(0.53)Ga_(0.47)As channel.Moreover,the degradation of 2DEG mobility and density becomes more severe as the increase of In content and strain in the In_(x)Ga_(1-x)As channel.The research results can provide some suggestions for the design of radiation-resistant InP-based HEMTs.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61274046,61201103,61335009 and61320106013the National Basic Research Program of China under Grant No 2013AA014202
文摘A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fabricated devices show a flattened spectral response with a broadened 3-dB bandwidth up to 3.5 nm, interchan- nel non-uniformity of 〈0. 7dB and excellent match to the simulation results.
基金the National Natural Science Foundation of China(Grant Nos.62204078 and U22A2072)the Natural Science Foundation of Henan Province for Excellent Youth Scholar(Grant No.232300421092).
文摘The performance of red InP and blue ZnTeSe-based quantum dots(QDs)and corresponding QD light emitting diodes(QLEDs)has already been improved significantly,whose external quantum efficiencies(EQEs)and luminances have exceeded 20%and 80000 cd m-2,respectively.However,the inferior performance of the green InP-based device hinders the commercialization of full-color Cd-free QLED technology.The ease of oxidation of the highly reactive InP cores leads to high non-radiative recombination and poor photoluminescence quantum yield(PL QY)of the InP-based core/shell QDs,limiting the performance of the relevant QLEDs.Here,we proposed a fluoride-free synthesis strategy to in-situ passivate the InP cores,in which zinc myristate reacted with phosphine dangling bonds to form Zn–P protective layer and protect InP cores from the water and oxygen in the environment.The resultant InP/ZnSe/ZnS core/shell QDs demonstrated a high PL QY of 91%.The corresponding green-emitting electroluminescence devices exhibited a maximum EQE of 12.74%,along with a luminance of over 175000 cd m^(-2)and a long T50@100 cd m^(-2)lifetime of over 20000 h.
基金National 973 Program(2014CB340102)National Natural Science Foundation of China(NSFC)(61674134)
文摘A monolithic integrated few-mode transmitter comprising of two directly modulated distributed feedback lasers and a multimode-interference-coupler-based mode converter-multiplexer with 66%mode conversion efficiency was designed and demonstrated.A fundamental TE0 mode and a first-order TE1 mode were successfully generated from the transmitter,with the output power of 4 and 5.5 mW at a pump current of around 150 mA,respectively,at the common output port.The small signal modulation bandwidth of the TE0 and TE1 channels reached 17.4 and 14.7 GHz,respectively.Error-free 2×10^(-9)bit∕s direct modulation of the two-mode transmitter was demonstrated,with a power penalty of 4.3 dB between the TE0 mode and the TE1 mode at the bit error rate of 1×10^(-9).
基金supported by the National Natural Science Foundation of China(Grant Nos.61404115 and 61434006)the Postdoctoral Science Foundation of Henan Province,China(Grant No.2014006)the Development Fund for Outstanding Young Teachers of Zhengzhou University(Grant No.1521317004)
文摘Direct current（DC） and radio frequency（RF） performances of InP-based high electron mobility transistors（HEMTs）are investigated by Sentaurus TCAD. The physical models including hydrodynamic transport model, Shockley–Read–Hall recombination, Auger recombination, radiative recombination, density gradient model and high field-dependent mobility are used to characterize the devices. The simulated results and measured results about DC and RF performances are compared, showing that they are well matched. However, the slight differences in channel current and pinch-off voltage may be accounted for by the surface defects resulting from oxidized InAlAs material in the gate-recess region. Moreover,the simulated frequency characteristics can be extrapolated beyond the test equipment limitation of 40 GHz, which gives a more accurate maximum oscillation frequency( f;) of 385 GHz.
