This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and...This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.展开更多
The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and redu...The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.展开更多
The automatic loading systems of artillery are critical for the accurate,efficient,and reliable delivery of pro-jectiles and propellants into the gun chamber.In modern artillery,the ammunition conveyor serves as the e...The automatic loading systems of artillery are critical for the accurate,efficient,and reliable delivery of pro-jectiles and propellants into the gun chamber.In modern artillery,the ammunition conveyor serves as the end effector of the automatic loading system,and its motion state significantly impacts the accuracy of projectiles.Therefore,it is of immense importance to precisely and effectively evaluate the reliability of the motion accuracy of the ammunition conveyor.This paper aims to propose a practical and efficient analysis method for evaluating the reliability of the motion accuracy of the ammunition conveyor.The proposed approach involves the use of a deep learning network to approximate the physical model and the extremum method to obtain a single cycle sequence decoupling strategy for solving the time-varying reliability issue of complex systems.Employing this strategy,the time-varying reliability of the ammunition conveyor is transformed into a static reliability problem.The proposed method includes the use of a deep feedforward neural network,second-order saddle point ap-proximation(SPA)method,extremum method,and efficient global optimization(EGO)technology.The results reveal that the reliability of the motion accuracy of the ammunition conveyor is 93.42%,with the maximum failure probability occurring at 0.21 s.These results serve as an important reference for the structural optimi-zation design of the ammunition conveyor based on reliability and the maintenance of the operational process.展开更多
This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable ...This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable bolts has received limited experimental attention,and their effectiveness in seismically active zones remains a subject of ongoing debate.To address this gap,a reverse pull-out test machine integrated with a drop hammer rig was employed.Tests were conducted on 70-t SUMO bulbed and non-bulbed cable bolts with encapsulation lengths of 300 and 450 mm,subjected to an impact energy of 14.52 k J.Results indicate that non-bulbed cables,despite showing lower initial peak loads(average 218 vs.328 k N for bulbed cables at 300 mm encapsulation),demonstrated superior energy absorption(average 11.26 vs.8.75 k J)and displacement capacity(average 48.40 vs.36.25 mm).Increasing the encapsulation length for bulbed cables led to a reduction in initial peak load but improved displacement and energy absorption.The dominant failure mechanism was debonding at the cable-grout interface,characterised by frictional sliding and cable rotation.These findings provide new insights into the energy dissipation mechanisms of cables and support the development of more resilient ground support systems for dynamically active conditions.展开更多
Investigating effect of recrystallization mechanism on deformation mode and texture evolution is conducive to controlling deformation mechanism and texture in magnesium alloys under medium-high temperature impact load...Investigating effect of recrystallization mechanism on deformation mode and texture evolution is conducive to controlling deformation mechanism and texture in magnesium alloys under medium-high temperature impact loading.In the present study,a Johnson-Cook model incorporating twin strengthening was established to simulate macro-deformation,and a twinning induced recrystallization(TDRX)model and bulging recrystallization(GBBDRX)model are introduced into visco-plastic self consistant(VPSC)framework to quantitatively study the deformation mechanism of pre-twinned AZ31 magnesium alloy during medium-high temperature impact loading.Both TDRX and GBBDRX occur,with basal slip as the dominant slip system,followed by pyramidal〈c+a〉slip and prismatic slip.The dynamic recrystallization(DRX)significantly influences basal and pyramidal〈c+a〉slip systems,with minimal impact on secondary deformation mechanism.In addition,the recrystallization mechanism of grain boundary bowing increases the activity of basal slip and decreases the activity of pyramidal〈c+a〉slip.The nucleation and growth of recrystallized grains enhance basal slip activity and suppress pyramidal〈c+a〉slip,leading to the formation of a strong basal texture.As dynamic recrystallization progresses,a bimodal texture develops,characterized by a reduction in basal component pole density and a more pronounced basal slip.展开更多
The growing demands on global infrastructure highlight the critical need for durable and efficient pavement systems,particularly under the stress of repetitive heavy traffic loads.The use of geosynthetics within the p...The growing demands on global infrastructure highlight the critical need for durable and efficient pavement systems,particularly under the stress of repetitive heavy traffic loads.The use of geosynthetics within the pavement structure increases the load-carrying capacity of unbound pavement layers by providing lateral restraint,improving vertical stress distribution,and enhancing bearing capacity.Such reinforcement typically aims to either improve the service life of pavements or achieve equivalent performance with a reduced granular cover.Previous and ongoing research quantifies geosynthetic performance in pavement reinforcement using various testing methods.Among these,laboratory model box tests subjected to cyclic loading are pivotal,as they closely replicate real-world traffic conditions.Hence,these studies are essential for understanding how geosynthetics distribute loads and enhance pavement durability.This facilitates the development of optimized geosynthetic design and installation practices,accelerating the loading process to simulate years of traffic wear in a shorter period.This review discusses the improved rutting resistance of unbound pavements reinforced with geosynthetic materials,specifically drawing on data from cyclic plate load tests conducted on laboratory model boxes,as highlighted in the literature.Key variables such as optimum geosynthetic placement,geosynthetic material properties,performance of different geosynthetic materials and the effects of aperture shape and size on rutting resistance are discussed.Furthermore,the review assesses various predictive rutting models,analysing their applicability and accuracy in forecasting the rutting performance of geosynthetic-reinforced unbound pavements.This comprehensive literature review aids pavement engineers and researchers,in guiding the selection and design of geosynthetics to optimize pavement durability and functionality under repetitive traffic loads.展开更多
The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and dispos...The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and disposing of this mining waste.This study employs a macro-meso-micro testing method to investigate the effects of the waste rock grading index(WGI)and loading rate(LR)on the uniaxial compressive strength(UCS),pore structure,and micromorphology of CTWB materials.Pore structures were analyzed using scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP).The particles(pores)and cracks analysis system(PCAS)software was used to quantitatively characterize the multi-scale micropores in the SEM images.The key findings indicate that the macroscopic results(UCS)of CTWB materials correspond to the microscopic results(pore structure and micromorphology).Changes in porosity largely depend on the conditions of waste rock grading index and loading rate.The inclusion of waste rock initially increases and then decreases the UCS,while porosity first decreases and then increases,with a critical waste rock grading index of 0.6.As the loading rate increases,UCS initially rises and then falls,while porosity gradually increases.Based on MIP and SEM results,at waste rock grading index 0.6,the most probable pore diameters,total pore area(TPA),pore number(PN),maximum pore area(MPA),and area probability distribution index(APDI)are minimized,while average pore form factor(APF)and fractal dimension of pore porosity distribution(FDPD)are maximized,indicating the most compact pore structure.At a loading rate of 12.0 mm/min,the most probable pore diameters,TPA,PN,MPA,APF,and APDI reach their maximum values,while FDPD reaches its minimum value.Finally,the mechanism of CTWB materials during compression is analyzed,based on the quantitative results of UCS and porosity.The research findings play a crucial role in ensuring the successful application of CTWB materials in deep metal mines.展开更多
With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity ...With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.展开更多
In-situ polymerized solid-state lithium metal batteries have garnered significant attention due to their conformal interface contact and continuous pathways for lithium ion(Li^(+))conduction.However,their electrochemi...In-situ polymerized solid-state lithium metal batteries have garnered significant attention due to their conformal interface contact and continuous pathways for lithium ion(Li^(+))conduction.However,their electrochemical performance is often hindered by slow Li^(+)transport within high-area-loading cathodes.This study presents an in-situ poly(ε-caprolactone)electrolyte with gradient molar mass(iGPCE)through lithium metal anode(LMA)-induced anionic ring-opening polymerization.Our electrochemical and kinetic analyses reveal that the iGPCE,characterized by low molar mass(M),significantly enhances Li~+diffusion within high-area-loading cathodes and bulk electrolytes,thereby reducing concentration polarization and promoting uniform electrochemical reactions.Moreover,the high M region on LMA side acts as artificial solid electrolyte interphases,stabilizing the stripping and plating of lithium.Consequently,Li//LFP(20 mg cm^(-2))and Li//NCM622(7.4 mg cm^(-2))utilizing iGPCE exhibit stable charge/discharge behaviors.This study offers a fresh approach to accelerate Li~+diffusion kinetics of high-area-loading batteries and suggests broad applicability in other systems.展开更多
Pt-based nanocatalysts offer excellent prospects for various industries.However,the low loading of Pt with excellent performance for efficient and stable nanocatalysts still presents a considerable challenge.In this s...Pt-based nanocatalysts offer excellent prospects for various industries.However,the low loading of Pt with excellent performance for efficient and stable nanocatalysts still presents a considerable challenge.In this study,nanocatalysts with ultralow Pt content,excellent performance,and carbon black as support were prepared through in-situ synthesis.These~2-nm particles uniformly and stably dispersed on carbon black because of the strong s-p-d orbital hybridizations between carbon black and Pt,which suppressed the agglomeration of Pt ions.This unique structure is beneficial for the hydrogen evolution reaction.The catalysts exhibited remarkable catalytic activity for hydrogen evolution reaction,exhibiting a potential of 100 mV at 100 mA·cm^(-2),which is comparable to those of commercial Pt/C catalysts.Mass activity(1.61 A/mg)was four times that of a commercial Pt/C catalyst(0.37 A/mg).The ultralow Pt loading(6.84wt%)paves the way for the development of next-generation electrocatalysts.展开更多
This work aims to reveal the mechanical responses and energy evolution characteristics of skarn rock under constant amplitude-varied frequency loading paths.Testing results show that the fatigue lifetime,stress−strain...This work aims to reveal the mechanical responses and energy evolution characteristics of skarn rock under constant amplitude-varied frequency loading paths.Testing results show that the fatigue lifetime,stress−strain responses,deformation,energy dissipation and fracture morphology are all impacted by the loading rate.A pronounced influence of the loading rate on rock deformation is found,with slower loading rate eliciting enhanced strain development,alongside augmented energy absorption and dissipation.In addition,it is revealed that the loading rate and cyclic loading amplitude jointly influence the phase shift distribution,with accelerated rates leading to a narrower phase shift duration.It is suggested that lower loading rate leads to more significant energy dissipation.Finally,the tensile or shear failure modes were intrinsically linked to loading strategy,with cyclic loading predominantly instigating shear damage,as manifest in the increased presence of pulverized grain particles.This work would give new insights into the fortification of mining structures and the optimization of mining methodologies.展开更多
The damage-fracture evolution of deep rock mass has obvious particularity,which is revealed in 2400-mdeep tunnels by field tests.The evolution of the excavation damaged zone depth is consistent with that of the fractu...The damage-fracture evolution of deep rock mass has obvious particularity,which is revealed in 2400-mdeep tunnels by field tests.The evolution of the excavation damaged zone depth is consistent with that of the fractured zone depth.The ratio of the excavation damaged zone depth to the excavation fractured zone depth is greater than 2.0 in a rock mass with both high strength and good integrity,but less than1.5 in a rock mass with lower strength or poor integrity.Zonal disintegration in a rock mass with high strength and fair integrity is more likely to occur when it contains more than two groups of primary fractures in damaged zones.Fractures develop outward in zonal disintegration but are totally different from the single-zone fracture,in which the fractures develop inward,and it is the starting position of the fractured zone when the excavation surface of the middle pilot is 7–9 m close to the pre-set borehole and it stops after the excavation surface of the baseplate is 11–14 m away.The most intense evolution occurs around 2–4 m from the pre-set borehole in the sidewall expansion stage.The research results provide a reference for the monitoring scheme and support design of CJPL-Ⅲin its future construction.展开更多
Twinning and detwinning behavior,together with slip behavior,are studied in a textured AZ31 magnesium alloy under compressive and tensile strains along the rolling direction(RD)after each interrupted mechanical test v...Twinning and detwinning behavior,together with slip behavior,are studied in a textured AZ31 magnesium alloy under compressive and tensile strains along the rolling direction(RD)after each interrupted mechanical test via quasi in-situ electron backscattered diffraction technique.The results show that twinning firstly takes place under the compressive strain along the RD.With the increasing compressive strain,{1012}tensile twins firstly nucleate,then propagate,and finally thicken.While under a reversed tensile strain along the RD,detwinning occurs.No nucleation happens during detwinning.Thus,tensile twins can detwin at lower tensile strain,followed by thinning,shortening,and vanishing.Slips are also activated to accommodate the plastic deformation.In the matrix,prismatic slip can only dominate at relatively high strains.Otherwise,basal slip dominates.While in the twins,prismatic slip can activate at lower strains,which is ascribed to the texture reorientation.展开更多
Cyclic changes in the internal pressure of compressed air energy storage reservoirs in abandoned coal mines result in complex alternating loads on the rocks surrounding the energy storage reservoirs.These complex alte...Cyclic changes in the internal pressure of compressed air energy storage reservoirs in abandoned coal mines result in complex alternating loads on the rocks surrounding the energy storage reservoirs.These complex alternating loads can be regarded as multi-stage constant-amplitude cyclic loads following simplification.In this paper,the mechanical responses and acoustic emission(AE)characteristics of red sandstone with five bedding dip angles(0°,30°,45°,60°,and 90°)under such loads are investigated,and the damage evolution processes of the five specimens are revealed from both quantitative and microscopic perspectives.The results show that the fatigue deformation characteristics of the specimens are affected by the bedding dip angle.Under cyclic loads,the axially irreversible plastic deformations of the rocks increase,their elastic stiffness increases,their crack volumetric strain increases and then decreases,and their AE cumulative count/energy curves exhibit a ladder shape.A damage evolution model based on the crack volumetric strain is proposed,and the damage evolution process is divided into two stages:a rapid increase stage and a tendency toward stabilization stage.Through cluster analysis,the AE events are used to classify the damage into three categories:small-sized localized damage,large-sized tensile damage,and large-sized shear damage.Finally,the MohreCoulomb criterion is applied to analyze the relationship between the failure modes of the red sandstone specimens and the dip angle of the bedding.The results of this study will help to predict the stability and safety of compressed air energy storage reservoirs in abandoned coal mines.展开更多
In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and compreh...In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.展开更多
To mitigate the challenges in managing the damage level of reinforced concrete(RC)pier columns subjected to cyclic reverse loading,this study conducted a series of cyclic reverse tests on RC pier columns.By analyzing ...To mitigate the challenges in managing the damage level of reinforced concrete(RC)pier columns subjected to cyclic reverse loading,this study conducted a series of cyclic reverse tests on RC pier columns.By analyzing the outcomes of destructive testing on various specimens and fine-tuning the results with the aid of the IMK(Ibarra Medina Krawinkler)recovery model,the energy dissipation capacity coefficient of the pier columns were able to be determined.Furthermore,utilizing the calibrated damage model parameters,the damage index for each specimen were calculated.Based on the obtained damage levels,three distinct pre-damage conditions were designed for the pier columns:minor damage,moderate damage,and severe damage.The study then predicted the variations in hysteresis curves and damage indices under cyclic loading conditions.The experimental findings reveal that the displacement at the top of the pier columns can serve as a reliable indicator for controlling the damage level of pier columns post-loading.Moreover,the calibrated damage index model exhibits proficiency in accurately predicting the damage level of RC pier columns under cyclic loading.展开更多
A conceptual model of intermittent joints is introduced to the cyclic shear test in the laboratory to explore the effects of loading parameters on its shear behavior under cyclic shear loading.The results show that th...A conceptual model of intermittent joints is introduced to the cyclic shear test in the laboratory to explore the effects of loading parameters on its shear behavior under cyclic shear loading.The results show that the loading parameters(initial normal stress,normal stiffness,and shear velocity)determine propagation paths of the wing and secondary cracks in rock bridges during the initial shear cycle,creating different morphologies of macroscopic step-path rupture surfaces and asperities on them.The differences in stress state and rupture surface induce different cyclic shear responses.It shows that high initial normal stress accelerates asperity degradation,raises shear resistance,and promotes compression of intermittent joints.In addition,high normal stiffness provides higher normal stress and shear resistance during the initial cycles and inhibits the dilation and compression of intermittent joints.High shear velocity results in a higher shear resistance,greater dilation,and greater compression.Finally,shear strength is most sensitive to initial normal stress,followed by shear velocity and normal stiffness.Moreover,average dilation angle is most sensitive to initial normal stress,followed by normal stiffness and shear velocity.During the shear cycles,frictional coefficient is affected by asperity degradation,backfilling of rock debris,and frictional area,exhibiting a non-monotonic behavior.展开更多
Non-seismically designed(NSD)beam-column joints are susceptible to joint shear failure under seismic loads.Although significant research is available on the seismic behavior of such joints of planar frames,the informa...Non-seismically designed(NSD)beam-column joints are susceptible to joint shear failure under seismic loads.Although significant research is available on the seismic behavior of such joints of planar frames,the information on the seismic behavior of joints of space frames(3D joints)is insufficient.The 3D joints are subjected to bi-directional excitation,which results in an interaction between the shear strength obtained for the joint in the two orthogonal directions separately.The bi-directional seismic behavior of corner reinforced concrete(RC)joints is the focus of this study.First,a detailed finite element(FE)model using the FE software Abaqus,is developed and validated using the test results from the literature.The validated modeling procedure is used to conduct a parametric study to investigate the influence of different parameters such as concrete strength,dimensions of main and transverse beams framing into the joint,presence or absence of a slab,axial load ratio and loading direction on the seismic behavior of joints.By subjecting the models to different combinations of loads on the beams along perpendicular directions,the interaction of the joint shear strength in two orthogonal directions is studied.The comparison of the interaction curves of the joints obtained from the numerical study with a quadratic(circular)interaction curve indicates that in a majority of cases,the quadratic interaction model can represent the strength interaction diagrams of RC beam to column connections with governing joint shear failure reasonably well.展开更多
It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and ...It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.展开更多
基金Acknowledgments This work has benefited from the use of 1） Los Alamos Neutron Science Facility at Los Alamos National Laboratory and 2） ISIS Pulsed Neutron and Muon Source at Rutherford-Appleton Laboratory. The financial support of the National Science Foundation＇s 1） International Materials Institutes （IMI） under DMR-0231320, 2） Integrative Graduate Education and Research Training （IGERT） under DGE-9987548, 3） Combined Research and Curriculum Development （CRCD） under EEC-9527527 and EEC-0203415, and 4） Major Research Instrumentation （MRI） under DMR-0231320 at the University of Tennessee with Dr HUBER C, Dr Van HARTESVELDT C J, Dr DUTTA D, Dr JENNINGS W, Dr G0LDBERG L, Ms P0ATS M, and Dr B0ULDIN C R as the Program Directors, is greatly appreciated. Additional funding for this project was gratefully received from the Tennessee Advanced Materials Laboratory, with Prof. PLUMMER E W as the Director.
文摘This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.
基金the supports of the National Natural Science Foundation of China(Grant No.52375378)。
文摘The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.
基金Supported by National Natural Science Foundation of China(Grant No.U2141246)Key Laboratory of Artillery Launch and Control Technology of China(Grant No.2021-001)Basic Research of State Administration of Science Technology and Industry for National Defense of China(Grant No.JXJL202208A001).
文摘The automatic loading systems of artillery are critical for the accurate,efficient,and reliable delivery of pro-jectiles and propellants into the gun chamber.In modern artillery,the ammunition conveyor serves as the end effector of the automatic loading system,and its motion state significantly impacts the accuracy of projectiles.Therefore,it is of immense importance to precisely and effectively evaluate the reliability of the motion accuracy of the ammunition conveyor.This paper aims to propose a practical and efficient analysis method for evaluating the reliability of the motion accuracy of the ammunition conveyor.The proposed approach involves the use of a deep learning network to approximate the physical model and the extremum method to obtain a single cycle sequence decoupling strategy for solving the time-varying reliability issue of complex systems.Employing this strategy,the time-varying reliability of the ammunition conveyor is transformed into a static reliability problem.The proposed method includes the use of a deep feedforward neural network,second-order saddle point ap-proximation(SPA)method,extremum method,and efficient global optimization(EGO)technology.The results reveal that the reliability of the motion accuracy of the ammunition conveyor is 93.42%,with the maximum failure probability occurring at 0.21 s.These results serve as an important reference for the structural optimi-zation design of the ammunition conveyor based on reliability and the maintenance of the operational process.
文摘This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable bolts has received limited experimental attention,and their effectiveness in seismically active zones remains a subject of ongoing debate.To address this gap,a reverse pull-out test machine integrated with a drop hammer rig was employed.Tests were conducted on 70-t SUMO bulbed and non-bulbed cable bolts with encapsulation lengths of 300 and 450 mm,subjected to an impact energy of 14.52 k J.Results indicate that non-bulbed cables,despite showing lower initial peak loads(average 218 vs.328 k N for bulbed cables at 300 mm encapsulation),demonstrated superior energy absorption(average 11.26 vs.8.75 k J)and displacement capacity(average 48.40 vs.36.25 mm).Increasing the encapsulation length for bulbed cables led to a reduction in initial peak load but improved displacement and energy absorption.The dominant failure mechanism was debonding at the cable-grout interface,characterised by frictional sliding and cable rotation.These findings provide new insights into the energy dissipation mechanisms of cables and support the development of more resilient ground support systems for dynamically active conditions.
基金supported by the National Natural Science Foundation of China(52471132,52475356,12272192,52475344,U21A20130)the Natural Science Foundation of Fujian Province for Distinguished Young Scholars(2024J010031)as well as the Natural Science Foundation of Chongqing(grant number CSTB2023NSCQ-MSX0886).
文摘Investigating effect of recrystallization mechanism on deformation mode and texture evolution is conducive to controlling deformation mechanism and texture in magnesium alloys under medium-high temperature impact loading.In the present study,a Johnson-Cook model incorporating twin strengthening was established to simulate macro-deformation,and a twinning induced recrystallization(TDRX)model and bulging recrystallization(GBBDRX)model are introduced into visco-plastic self consistant(VPSC)framework to quantitatively study the deformation mechanism of pre-twinned AZ31 magnesium alloy during medium-high temperature impact loading.Both TDRX and GBBDRX occur,with basal slip as the dominant slip system,followed by pyramidal〈c+a〉slip and prismatic slip.The dynamic recrystallization(DRX)significantly influences basal and pyramidal〈c+a〉slip systems,with minimal impact on secondary deformation mechanism.In addition,the recrystallization mechanism of grain boundary bowing increases the activity of basal slip and decreases the activity of pyramidal〈c+a〉slip.The nucleation and growth of recrystallized grains enhance basal slip activity and suppress pyramidal〈c+a〉slip,leading to the formation of a strong basal texture.As dynamic recrystallization progresses,a bimodal texture develops,characterized by a reduction in basal component pole density and a more pronounced basal slip.
基金financial and intellectual support provided by Queensland University of Technology(QUT)through its Higher Degree Research Program.
文摘The growing demands on global infrastructure highlight the critical need for durable and efficient pavement systems,particularly under the stress of repetitive heavy traffic loads.The use of geosynthetics within the pavement structure increases the load-carrying capacity of unbound pavement layers by providing lateral restraint,improving vertical stress distribution,and enhancing bearing capacity.Such reinforcement typically aims to either improve the service life of pavements or achieve equivalent performance with a reduced granular cover.Previous and ongoing research quantifies geosynthetic performance in pavement reinforcement using various testing methods.Among these,laboratory model box tests subjected to cyclic loading are pivotal,as they closely replicate real-world traffic conditions.Hence,these studies are essential for understanding how geosynthetics distribute loads and enhance pavement durability.This facilitates the development of optimized geosynthetic design and installation practices,accelerating the loading process to simulate years of traffic wear in a shorter period.This review discusses the improved rutting resistance of unbound pavements reinforced with geosynthetic materials,specifically drawing on data from cyclic plate load tests conducted on laboratory model boxes,as highlighted in the literature.Key variables such as optimum geosynthetic placement,geosynthetic material properties,performance of different geosynthetic materials and the effects of aperture shape and size on rutting resistance are discussed.Furthermore,the review assesses various predictive rutting models,analysing their applicability and accuracy in forecasting the rutting performance of geosynthetic-reinforced unbound pavements.This comprehensive literature review aids pavement engineers and researchers,in guiding the selection and design of geosynthetics to optimize pavement durability and functionality under repetitive traffic loads.
基金Project(2022YFC2904103)supported by the National Key Research and Development Program of ChinaProjects(52374112,52274108)supported by the National Natural Science Foundation of China+1 种基金Projects(BX20220036,BX20230041)supported by the Postdoctoral Innovation Talents Support Program,ChinaProject(2232080)supported by the Beijing Natural Science Foundation,China。
文摘The development of metallic mineral resources generates a significant amount of solid waste,such as tailings and waste rock.Cemented tailings and waste-rock backfill(CTWB)is an effective method for managing and disposing of this mining waste.This study employs a macro-meso-micro testing method to investigate the effects of the waste rock grading index(WGI)and loading rate(LR)on the uniaxial compressive strength(UCS),pore structure,and micromorphology of CTWB materials.Pore structures were analyzed using scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP).The particles(pores)and cracks analysis system(PCAS)software was used to quantitatively characterize the multi-scale micropores in the SEM images.The key findings indicate that the macroscopic results(UCS)of CTWB materials correspond to the microscopic results(pore structure and micromorphology).Changes in porosity largely depend on the conditions of waste rock grading index and loading rate.The inclusion of waste rock initially increases and then decreases the UCS,while porosity first decreases and then increases,with a critical waste rock grading index of 0.6.As the loading rate increases,UCS initially rises and then falls,while porosity gradually increases.Based on MIP and SEM results,at waste rock grading index 0.6,the most probable pore diameters,total pore area(TPA),pore number(PN),maximum pore area(MPA),and area probability distribution index(APDI)are minimized,while average pore form factor(APF)and fractal dimension of pore porosity distribution(FDPD)are maximized,indicating the most compact pore structure.At a loading rate of 12.0 mm/min,the most probable pore diameters,TPA,PN,MPA,APF,and APDI reach their maximum values,while FDPD reaches its minimum value.Finally,the mechanism of CTWB materials during compression is analyzed,based on the quantitative results of UCS and porosity.The research findings play a crucial role in ensuring the successful application of CTWB materials in deep metal mines.
基金supported by PetroChina Coalbed Methane Co.,Ltd.
文摘With the maturation of coalbed methane(CBM)exploitation and the transition into the late stages of dewatering and gas production,liquid loading in gathering pipelines has emerged as a major constraint on productivity and operational stability.Based on real-time field data and gas-liquid physicochemical analyses,this study elucidates the mechanisms governing liquid loading formation under varying temperature,pressure,and water saturation conditions.An HYSYS model is employed to determine the water dew point,while the Turner model is used to evaluate the critical conditions for liquid holdup.The results indicate that gas water saturation exerts the dominant influence on liquid loading risk,followed by pressure,whereas temperature plays a comparatively minor role.When water saturation exceeds 2%and the operating temperature falls below the dew point,condensation-driven liquid loading increases sharply.To further characterize the spatial distribution of liquid accumulation,a steady-state OLGA model of a DN100 gathering pipeline network is developed to examine the effects of pipe diameter,water saturation,and soil temperature.The simulations show that larger pipe diameters and higher water saturation significantly aggravate liquid holdup,while elevated soil temperature mitigates liquid accumulation.Moreover,the liquid holdup ratio is found to correlate closely with flow regime transitions,confirming its suitability as a key indicator of liquid loading risk.Based on these findings,optimization strategies for pipeline design and operation are proposed.To mitigate liquid loading,the gathering pipeline velocity should be maintained above the critical value of 1.63 m/s,and the gas water content should be strictly controlled below 2%.Under operating conditions representative of the Hancheng block,it is recommended to reduce the pipeline diameter from DN130 to DN100 to enhance self-cleaning capacity.In addition,thermal insulation should be applied during winter operation to maintain the pipe wall temperature above 10◦C,thereby suppressing condensation-induced liquid accumulation.
基金supported by the Key Scientific Research Project of Colleges and Universities in Henan(24A480006 and 24A530005)the Natural Science Foundation of Henan Province(242300420337)。
文摘In-situ polymerized solid-state lithium metal batteries have garnered significant attention due to their conformal interface contact and continuous pathways for lithium ion(Li^(+))conduction.However,their electrochemical performance is often hindered by slow Li^(+)transport within high-area-loading cathodes.This study presents an in-situ poly(ε-caprolactone)electrolyte with gradient molar mass(iGPCE)through lithium metal anode(LMA)-induced anionic ring-opening polymerization.Our electrochemical and kinetic analyses reveal that the iGPCE,characterized by low molar mass(M),significantly enhances Li~+diffusion within high-area-loading cathodes and bulk electrolytes,thereby reducing concentration polarization and promoting uniform electrochemical reactions.Moreover,the high M region on LMA side acts as artificial solid electrolyte interphases,stabilizing the stripping and plating of lithium.Consequently,Li//LFP(20 mg cm^(-2))and Li//NCM622(7.4 mg cm^(-2))utilizing iGPCE exhibit stable charge/discharge behaviors.This study offers a fresh approach to accelerate Li~+diffusion kinetics of high-area-loading batteries and suggests broad applicability in other systems.
基金financially supported by the National Natural Science Foundation of China(No.5217042069)the Young Elite Scientist Sponsorship Program by China Association for Science and Technology(CAST)(No.YESS20200103)the Fundamental Research Funds for the Central Universities(No.265QZ2022004)。
文摘Pt-based nanocatalysts offer excellent prospects for various industries.However,the low loading of Pt with excellent performance for efficient and stable nanocatalysts still presents a considerable challenge.In this study,nanocatalysts with ultralow Pt content,excellent performance,and carbon black as support were prepared through in-situ synthesis.These~2-nm particles uniformly and stably dispersed on carbon black because of the strong s-p-d orbital hybridizations between carbon black and Pt,which suppressed the agglomeration of Pt ions.This unique structure is beneficial for the hydrogen evolution reaction.The catalysts exhibited remarkable catalytic activity for hydrogen evolution reaction,exhibiting a potential of 100 mV at 100 mA·cm^(-2),which is comparable to those of commercial Pt/C catalysts.Mass activity(1.61 A/mg)was four times that of a commercial Pt/C catalyst(0.37 A/mg).The ultralow Pt loading(6.84wt%)paves the way for the development of next-generation electrocatalysts.
基金Project(52174069) supported by the National Natural Science Foundation of ChinaProject(8202033) supported by the Beijing Natural Science Foundation,ChinaProject(KCF2203) supported by the Henan Key Laboratory for Green and Efficient Mining&Comprehensive Utilization of Mineral Resources (Henan Polytechnic University),China。
文摘This work aims to reveal the mechanical responses and energy evolution characteristics of skarn rock under constant amplitude-varied frequency loading paths.Testing results show that the fatigue lifetime,stress−strain responses,deformation,energy dissipation and fracture morphology are all impacted by the loading rate.A pronounced influence of the loading rate on rock deformation is found,with slower loading rate eliciting enhanced strain development,alongside augmented energy absorption and dissipation.In addition,it is revealed that the loading rate and cyclic loading amplitude jointly influence the phase shift distribution,with accelerated rates leading to a narrower phase shift duration.It is suggested that lower loading rate leads to more significant energy dissipation.Finally,the tensile or shear failure modes were intrinsically linked to loading strategy,with cyclic loading predominantly instigating shear damage,as manifest in the increased presence of pulverized grain particles.This work would give new insights into the fortification of mining structures and the optimization of mining methodologies.
基金supported by the National Natural Science Foundation of China(Nos.51909136 and 42177168)Project of Youth Inno vation Promotion Association of Chinese Academy of Sciences(No.2021326)the Open Research Fund of Key Laboratory of Geological Hazards on Three Gorges Reservoir Area(China Three Gorges University),Ministry of Education(No.2020KDZ03)。
文摘The damage-fracture evolution of deep rock mass has obvious particularity,which is revealed in 2400-mdeep tunnels by field tests.The evolution of the excavation damaged zone depth is consistent with that of the fractured zone depth.The ratio of the excavation damaged zone depth to the excavation fractured zone depth is greater than 2.0 in a rock mass with both high strength and good integrity,but less than1.5 in a rock mass with lower strength or poor integrity.Zonal disintegration in a rock mass with high strength and fair integrity is more likely to occur when it contains more than two groups of primary fractures in damaged zones.Fractures develop outward in zonal disintegration but are totally different from the single-zone fracture,in which the fractures develop inward,and it is the starting position of the fractured zone when the excavation surface of the middle pilot is 7–9 m close to the pre-set borehole and it stops after the excavation surface of the baseplate is 11–14 m away.The most intense evolution occurs around 2–4 m from the pre-set borehole in the sidewall expansion stage.The research results provide a reference for the monitoring scheme and support design of CJPL-Ⅲin its future construction.
基金support from the US Department of Energy,Office of Basic Energy Science under Award no.DE-SC0016333.
文摘Twinning and detwinning behavior,together with slip behavior,are studied in a textured AZ31 magnesium alloy under compressive and tensile strains along the rolling direction(RD)after each interrupted mechanical test via quasi in-situ electron backscattered diffraction technique.The results show that twinning firstly takes place under the compressive strain along the RD.With the increasing compressive strain,{1012}tensile twins firstly nucleate,then propagate,and finally thicken.While under a reversed tensile strain along the RD,detwinning occurs.No nucleation happens during detwinning.Thus,tensile twins can detwin at lower tensile strain,followed by thinning,shortening,and vanishing.Slips are also activated to accommodate the plastic deformation.In the matrix,prismatic slip can only dominate at relatively high strains.Otherwise,basal slip dominates.While in the twins,prismatic slip can activate at lower strains,which is ascribed to the texture reorientation.
基金supported by the National Natural Science Foundation of China(Grant No.52374078)the Fundamental Research Funds for the Central Universities(Grant No.2023CDJKYJH021)the Sichuan-Chongqing Science and Technology Innovation Cooperation Program Project(Grant No.2024TIAD-CYKJCXX0011).
文摘Cyclic changes in the internal pressure of compressed air energy storage reservoirs in abandoned coal mines result in complex alternating loads on the rocks surrounding the energy storage reservoirs.These complex alternating loads can be regarded as multi-stage constant-amplitude cyclic loads following simplification.In this paper,the mechanical responses and acoustic emission(AE)characteristics of red sandstone with five bedding dip angles(0°,30°,45°,60°,and 90°)under such loads are investigated,and the damage evolution processes of the five specimens are revealed from both quantitative and microscopic perspectives.The results show that the fatigue deformation characteristics of the specimens are affected by the bedding dip angle.Under cyclic loads,the axially irreversible plastic deformations of the rocks increase,their elastic stiffness increases,their crack volumetric strain increases and then decreases,and their AE cumulative count/energy curves exhibit a ladder shape.A damage evolution model based on the crack volumetric strain is proposed,and the damage evolution process is divided into two stages:a rapid increase stage and a tendency toward stabilization stage.Through cluster analysis,the AE events are used to classify the damage into three categories:small-sized localized damage,large-sized tensile damage,and large-sized shear damage.Finally,the MohreCoulomb criterion is applied to analyze the relationship between the failure modes of the red sandstone specimens and the dip angle of the bedding.The results of this study will help to predict the stability and safety of compressed air energy storage reservoirs in abandoned coal mines.
基金supported by the Chongqing Youth Talent Support Program(Cstc2022ycjh-bgzxm0079)the Chinese National Natural Science Foundation(52379128,51979152)+2 种基金Science Fund for Distinguished Young Scholars of Hubei Proivnce(2023AFA048)Educational Commission of Hubei Province of China(T2020005)the Young Top-notch Talent Cultivation Program of Hubei Province.
文摘In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.
基金supported by National Natural Science Foundation of China(Project No.51878156)EPC Innovation Consulting Project for Longkou Nanshan LNG Phase I Receiving Terminal(Z2000LGENT0399).
文摘To mitigate the challenges in managing the damage level of reinforced concrete(RC)pier columns subjected to cyclic reverse loading,this study conducted a series of cyclic reverse tests on RC pier columns.By analyzing the outcomes of destructive testing on various specimens and fine-tuning the results with the aid of the IMK(Ibarra Medina Krawinkler)recovery model,the energy dissipation capacity coefficient of the pier columns were able to be determined.Furthermore,utilizing the calibrated damage model parameters,the damage index for each specimen were calculated.Based on the obtained damage levels,three distinct pre-damage conditions were designed for the pier columns:minor damage,moderate damage,and severe damage.The study then predicted the variations in hysteresis curves and damage indices under cyclic loading conditions.The experimental findings reveal that the displacement at the top of the pier columns can serve as a reliable indicator for controlling the damage level of pier columns post-loading.Moreover,the calibrated damage index model exhibits proficiency in accurately predicting the damage level of RC pier columns under cyclic loading.
基金financially supported by the National Natural Science Foundation of China(Grant No.42172292)Taishan Scholars Project Special Funding,and Shandong Energy Group(Grant No.SNKJ 2022A01-R26).
文摘A conceptual model of intermittent joints is introduced to the cyclic shear test in the laboratory to explore the effects of loading parameters on its shear behavior under cyclic shear loading.The results show that the loading parameters(initial normal stress,normal stiffness,and shear velocity)determine propagation paths of the wing and secondary cracks in rock bridges during the initial shear cycle,creating different morphologies of macroscopic step-path rupture surfaces and asperities on them.The differences in stress state and rupture surface induce different cyclic shear responses.It shows that high initial normal stress accelerates asperity degradation,raises shear resistance,and promotes compression of intermittent joints.In addition,high normal stiffness provides higher normal stress and shear resistance during the initial cycles and inhibits the dilation and compression of intermittent joints.High shear velocity results in a higher shear resistance,greater dilation,and greater compression.Finally,shear strength is most sensitive to initial normal stress,followed by shear velocity and normal stiffness.Moreover,average dilation angle is most sensitive to initial normal stress,followed by normal stiffness and shear velocity.During the shear cycles,frictional coefficient is affected by asperity degradation,backfilling of rock debris,and frictional area,exhibiting a non-monotonic behavior.
文摘Non-seismically designed(NSD)beam-column joints are susceptible to joint shear failure under seismic loads.Although significant research is available on the seismic behavior of such joints of planar frames,the information on the seismic behavior of joints of space frames(3D joints)is insufficient.The 3D joints are subjected to bi-directional excitation,which results in an interaction between the shear strength obtained for the joint in the two orthogonal directions separately.The bi-directional seismic behavior of corner reinforced concrete(RC)joints is the focus of this study.First,a detailed finite element(FE)model using the FE software Abaqus,is developed and validated using the test results from the literature.The validated modeling procedure is used to conduct a parametric study to investigate the influence of different parameters such as concrete strength,dimensions of main and transverse beams framing into the joint,presence or absence of a slab,axial load ratio and loading direction on the seismic behavior of joints.By subjecting the models to different combinations of loads on the beams along perpendicular directions,the interaction of the joint shear strength in two orthogonal directions is studied.The comparison of the interaction curves of the joints obtained from the numerical study with a quadratic(circular)interaction curve indicates that in a majority of cases,the quadratic interaction model can represent the strength interaction diagrams of RC beam to column connections with governing joint shear failure reasonably well.
基金financially supported by National Natural Science Foundation of China(No.52304136)Young Talent of Lifting Engineering for Science and Technology in Shandong,China(No.SDAST2024QTA060)Key Project of Research and Development in Liaocheng(No.2023YD02)。
文摘It is important to analyze the damage evolution process of surrounding rock under different water content for the stability of engineering rock mass.Based on digital speckle correlation(DSCM),acoustic emission(AE)and electromagnetic radiation(EMR),uniaxial hierarchical cyclic loading and unloading tests were carried out on sandstones with different fracture numbers under dry,natural and saturated water content,to explore the fracture propagation,failure precursor characteristics and damage response mechanism under the influence of water content effect.The results show that with the increase of water content,the peak stress and crack initiation stress decrease gradually,and the decreases are 15.28%-21.11%and 17.64%-23.04%,respectively.The peak strain and crack initiation strain increase gradually,and the increases are 19.85%-44.53%and 19.15%-41.94%,respectively.The precracked rock with different water content is mainly characterized by tensile failure at different loading stages.However,with the increase of water content,the proportion of shear cracks gradually increases,while acoustic emission events gradually decrease,the dissipative energy and energy storage limits of the rock under peak load gradually decrease,and the charge signal increases significantly,which is because the lubrication effect of water reduces the friction coefficient between crack surfaces.
