In this paper,the dispersion,attenuation,and bandgap characteristics of in-plane coupled Bloch waves in one-dimensional piezoelectric semiconductor(PSC)phononic crystals are investigated,emphasizing the influence of p...In this paper,the dispersion,attenuation,and bandgap characteristics of in-plane coupled Bloch waves in one-dimensional piezoelectric semiconductor(PSC)phononic crystals are investigated,emphasizing the influence of positive-negative(PN)junctions.Unlike piezoelectric phononic crystals,the coupled Bloch waves in PSC phononic crystals are attenuated due to their semiconductor properties,and thus the solution of Bloch waves becomes more complicated.The transfer matrix of the phononic crystal unit cell is obtained using the state transfer equation.By applying the Bloch theorem for periodic structures,the dispersion relation of the coupled Bloch waves is derived,and the dispersion,attenuation,and bandgap are obtained in the complex wave number domain.It is found that the influence of the PN junction cannot be neglected.Moreover,the effects of the PN junction under different apparent wave numbers and steady-state carrier concentrations are provided.This indicates the feasibility of adjusting the propagation characteristics of Bloch waves through the regulation of the PN heterojunction.展开更多
One-dimensional ensemble dispersion entropy(EDE1D)is an effective nonlinear dynamic analysis method for complexity measurement of time series.However,it is only restricted to assessing the complexity of one-di-mension...One-dimensional ensemble dispersion entropy(EDE1D)is an effective nonlinear dynamic analysis method for complexity measurement of time series.However,it is only restricted to assessing the complexity of one-di-mensional time series(TS1d)with the extracted complexity features only at a single scale.Aiming at these problems,a new nonlinear dynamic analysis method termed two-dimensional composite multi-scale ensemble Gramian dispersion entropy(CMEGDE_(2D))is proposed in this paper.First,the TS_(1D) is transformed into a two-dimensional image(I_(2D))by using Gramian angular fields(GAF)with more internal data structures and geometri features,which preserve the global characteristics and time dependence of vibration signals.Second,the I2D is analyzed at multiple scales through the composite coarse-graining method,which overcomes the limitation of a single scale and provides greater stability compared to traditional coarse-graining methods.Subsequently,a new fault diagnosis method of rolling bearing is proposed based on the proposed CMEGDE_(2D) for fault feature ex-traction and the chicken swarm algorithm optimized support vector machine(CsO-SvM)for fault pattern identification.The simulation signals and two data sets of rolling bearings are utilized to verify the effectiveness of the proposed fault diagnosis method.The results demonstrate that the proposed method has stronger dis-crimination ability,higher fault diagnosis accuracy and better stability than the other compared methods.展开更多
The relative dispersion of cloud and fog droplets has significant impacts on aerosol indirect effects,radiative transfer,and microphysical processes.However,previous studies have been mostly concerned with clouds,with...The relative dispersion of cloud and fog droplets has significant impacts on aerosol indirect effects,radiative transfer,and microphysical processes.However,previous studies have been mostly concerned with clouds,with limited studies on fog,particularly those that examine the combined influences of all key physical processes and their roles during fog evolution.As such,this study aims to conduct a comprehensive investigation by examining the relationships between relative dispersion and other microphysical variables,as well as the underlying microphysical and dynamic processes,based on field fog campaigns in polluted and clean conditions.In polluted fog,droplet concentrations are higher,leading to smaller droplets and increased dispersion.The correlation between dispersion and droplet volume-mean radius is positive in the polluted fog,but shifts to negative in clean fog.We attribute the difference to various microphysical processes like aerosol activation,condensation,collision-coalescence,and entrainment-mixing.In polluted fog,high aerosol concentrations,low supersaturations,and strong turbulence(entrainment-mixing)provide suitable conditions for the simultaneous occurrence of droplet condensation and aerosol activation,resulting in a positive correlation between dispersion and volume-mean radius,especially during the fog formation stage.In contrast,during the mature stage in clean fog,condensation is dominant with weak aerosol activation leading to a negative correlation between relative dispersion and volume-mean radius.The collision-coalescence process is more active in the mature stage,increasing radii and leading to the negative correlation between dispersion and volume-mean radius.This result sheds new light on understanding the relative dispersion and mechanisms in fog under different aerosol backgrounds.展开更多
Nanoparticle-reinforced Mg matrix composites(NPMMCs)capitalize on the synergistic properties of nanoparticles and Mg matrix,resulting in enhanced mechanical attributes compared to matrix.Nonetheless,effective high-tem...Nanoparticle-reinforced Mg matrix composites(NPMMCs)capitalize on the synergistic properties of nanoparticles and Mg matrix,resulting in enhanced mechanical attributes compared to matrix.Nonetheless,effective high-temperature dispersion of nanoparticles remains challenging.This study employs a molten salt dispersant(NaCl-KCl-MgCl_(2))effectively mitigating the oxidation and combustion of TiC nanoparticles(TiC_(np)).Compared with the atmosphere,the molten salt facilitates the pre-dispersion of TiC_(np)through thermal motion at elevated temperatures,thereby reducing agglomeration between the TiC_(np).Simultaneously,the molten salt effectively wets and disrupts the oxide layer on the surface of Mg melt,facilitating the wetting of TiC_(np)by the Mg melt.The successful incorporation of 3 vol.%TiC_(np)into the Mg matrix is achieved by utilizing molten salt,and the addition of TiC_(np)increases the viscosity of mg melt.Further dispersed by ultrasonic dispersion,the unique distribution of TiC_(np)within ring-like structures was obtained which was attributed to the increase of viscosity.As a configurational distribution,the ring-like TiC_(np)distribution morphology significantly enhances the mechanical properties of composites,as evidenced by an approximate 50%increase in compressive strength(UCS).展开更多
This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activat...This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activating DNA damage response(ATR/CHK1 and ATM/CHK2)pathways and downregulating telomere-binding proteins.Although its therapeutic potential is limited by poor aqueous solubility,solid dispersion(SD)technology may overcome this obstacle.Systematic analysis using PubChem-derived simplified molecular input line entry system identifiers and artificial intelligence-driven FormulationDT platform evaluation(oral formulation feasibility index:0.38)revealed that the SD technology,with superior scalability(32 approved products by 2021)and lower production risks,outperforms lipid-based formulations as an optimal dissolution strategy.Material analysis revealed hydroxypropyl methylcellulose(HPMC)as the optimal carrier with lower hygroscopicity,higher temperature and no intestinal targeting,thus enabling ESCC therapy.HPMC-based SD enhances BIBR1532 solubility and bioavailability for effective ESCC treatment.Future studies should focus on pilot tests for SD fabrication.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were freque...Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were frequently observed during the heating season.Dispersion Normalized Positive Matrix Factorization was applied for the source apportionment of PM_(2.5) as minimize the dilution effects of meteorology and better reflect the source strengths in these two cities.Secondary nitrate had the highest contribution for Beijing(37.3%),and residential heating/biomass burning was the largest for Baoding(27.1%).Secondary nitrate,mobile,biomass burning,district heating,oil combustion,aged sea salt sources showed significant differences between the heating and non-heating seasons in Beijing for same period(2019.01.10–2019.08.22)(Mann-Whitney Rank Sum Test P<0.05).In case of Baoding,soil,residential heating/biomass burning,incinerator,coal combustion,oil combustion sources showed significant differences.The results of Pearson correlation analysis for the common sources between the two cities showed that long-range transported sources and some sources with seasonal patterns such as oil combustion and soil had high correlation coefficients.Conditional Bivariate Probability Function(CBPF)was used to identify the inflow directions for the sources,and joint-PSCF(Potential Source Contribution Function)was performed to determine the common potential source areas for sources affecting both cities.These models facilitated a more precise verification of city-specific influences on PM_(2.5) sources.The results of this study will aid in prioritizing air pollution mitigation strategies during the heating season and strengthening air quality management to reduce the impact of downwind neighboring cities.展开更多
Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,i...Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,including low tensile strength,poor toughness,and high susceptibility to cracking.However,because of its high specific surface area and the van der Waals force between layers,graphene is prone to agglomerate in the cement matrix which can make the properties worse.Hence,improving the graphene dispersion is essential.The surface structure and properties of graphene and its derivatives are first introduced,and the different methods for their dispersion in cement-based materials are reviewed.Their effects on the mechanical properties and durability of cement-based materials are then summarized.Based on these results,the microscopic and nanoscopic mechanisms of the way graphene and its derivatives affect cement-based materials are elaborated.Current problems and future trends in this research area are then considered.展开更多
For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchma...For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchmark construction.This paper proposes an architecture for detecting detector flatness based on channel spectral dispersion.By measuring the dispersion fringes for coplanar adjustment,the final adjustment residual is improved to better than 300 nm.This result validates the feasibility of the proposed technology and provides significant technical support for the development of next-generation large-aperture sky survey equipment.展开更多
The evolution of microstructure and texture in Mg-3Al-1Zn-1Ca alloy sheets subjected to in-plane shear(IPS)loading was investigated using experimental techniques and viscoplastic self-consistent(VPSC)modeling.The spec...The evolution of microstructure and texture in Mg-3Al-1Zn-1Ca alloy sheets subjected to in-plane shear(IPS)loading was investigated using experimental techniques and viscoplastic self-consistent(VPSC)modeling.The specimens were deformed under varying degrees of IPS strain(γ12=0.05,0.10,and 0.15)using a customized jig.Electron backscatter diffraction(EBSD)observations revealed profuse tensile twinning(TTW)even at an IPS strain of 0.05,with its intensity continuously increased as the IPS strain increased.The TTWs progressively engulfed parent grains with increasing shear strain,evolving into an unusual deformation twin morphology.Furthermore,VPSC model predictions confirmed basal slip as the dominant deformation mode at low IPS strains,transitioning to prismatic slip dominance at higher IPS strains.The activity of the TTW mode was significantly higher during the initial stages of IPS strain and saturated to lower values at higher strains.VPSC simulation results also indicated preferential shear accumulation on a single twin system,explaining the phenomenon of a single twin variant engulfing a parent grain.Additionally,the influence of individual slip and twin modes on texture evolution was evaluated through orientation tracking of representative grains at various shear strain increments using VPSC simulation.The simulation results quantitatively highlighted the activities of basal slip,prismatic slip,and tensile twinning,establishing a correlation between texture evolution and the underlying deformation mechanisms.展开更多
The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The result...The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.展开更多
Two-dimensional van der Waals(vdW)magnetic materials,characterized by their tunable magnetism,spin transport properties,and remarkable quantum effects,provide significant promise for the development of efficient,low-p...Two-dimensional van der Waals(vdW)magnetic materials,characterized by their tunable magnetism,spin transport properties,and remarkable quantum effects,provide significant promise for the development of efficient,low-power spintronic devices.Intriguingly,the rare earth tritelluride(RTe3)materials have attracted great attention due to their unique magnetic structure,exotic electronic properties,multiple charge density wave(CDW),and superconductivity under pressure.Here,we report the successful synthesis of high-quality DyTe_(3)single crystals using a self-flux method.DyTe_(3)shows an antiferromagnetic transition at 4.5 K and demonstrates the magnetic field-induced ferromagnetism.The high-quality DyTe_(3)single crystal demonstrates outstanding transport properties,featuring a high carrier mobility of approximately1.4×10^(4)cm^(2)·V^(-1)·s^(-1)and large linear magnetoresistance of 1300%.Furthermore,distinct Shubnikov-de Haas(SdH)oscillations are observed in DyTe_(3),revealing a small Fermi pocket and an effective mass of 0.24 me.Remarkably,the unconventional in-plane negative magnetoresistances appear along the a-axis below 2 T and c-axis until 9 T from 2 K to17 K,which are attributed to the complex helimagnetic structures caused by CDW coupling and weak single-ion anisotropy.Our findings offer a significant platform for understanding the complex magnetoresistance behavior and quantum transport effects in RTe3-type materials,holding great promise for advancing applications in electronic and spintronic devices.展开更多
Exploring earth-abundant,highly active bifunctional electrocatalysts for efficient hydrogen and oxygen evolution is crucial for water splitting.However,due to their distinct free energies and conducting behaviors(elec...Exploring earth-abundant,highly active bifunctional electrocatalysts for efficient hydrogen and oxygen evolution is crucial for water splitting.However,due to their distinct free energies and conducting behaviors(electron/hole),balancing the catalytic efficiency between hydrogen and oxygen evolution remains challenging for achieving bifunctional electrocatalysts.Here,we report a locally-doped MoS_(2)monolayer with an in-plane heterostructure acting as a bifunctional electrocatalyst and apply it to the overall water splitting.In this heterostructure,the core region contains Mo/S vacancies,while the ring region was doped by Fe atoms(in two substitution configurations:1FeMo and 3FeMo-VS clusters)with a p-type conductive characteristic.Our micro-cell measurements,combined with density functional theory(DFT)calculations,reveal that the vacancies-rich core region presents remarkable hydrogen evolution reaction(HER)activity while the Fe-doped ring gives an excellent oxygen evolution reaction(OER)activity,thus forming an in-plane bifunctional electrocatalyst.Finally,as a proof-of-concept for overall water splitting,we constructed a full-cell configuration based on a locally-doped MoS_(2)monolayer,which achieved a cell voltage of 1.87 V at 10 mA·cm^(-2),demonstrating outstanding performance in strong acid electrolytes.Our work provides insight into the hetero-integration of bifunctional electrocatalysts at the atomic level,paving the way for designing transition metal dichalcogenide catalysts with activity-manipulated regions capable of multiple reactions.展开更多
Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN mo...Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN model designed to predict optical fiber dispersion is trained with an appropriate choice of hyperparameters,achieving a root mean square error(RMSE) of 9.47×10-7on the test dataset,with a determination coefficient(R2) of 0.999.Secondly,the NN is combined with the PSO algorithm for the inverse design of dispersion-flattened optical fibers.To expand the search space and avoid particles becoming trapped in local optimal solutions,the PSO algorithm incorporates adaptive inertia weight updating and a simulated annealing algorithm.Finally,by using a suitable fitness function,the designed fibers exhibit flat group velocity dispersion(GVD) profiles at 1 400—2 400 nm,where the GVD fluctuations and minimum absolute GVD values are below 18 ps·nm-1·km-1and 7 ps·nm-1·km-1,respectively.展开更多
The in-plane optical anisotropy(IPOA) of c-plane In Ga N/Ga N quantum disks(Qdisks) in nanowires grown on MoS_(2)/Mo and Ti/Mo substrates is investigated using reflectance difference spectroscopy(RDS) at room temperat...The in-plane optical anisotropy(IPOA) of c-plane In Ga N/Ga N quantum disks(Qdisks) in nanowires grown on MoS_(2)/Mo and Ti/Mo substrates is investigated using reflectance difference spectroscopy(RDS) at room temperature. A large IPOA related to defect or impurity states is observed. The IPOA of samples grown on MoS_(2)/Mo is approximately one order of magnitude larger than that of samples grown on Ti/Mo substrates. Numerical calculations based on the envelope function approximation have been performed to analyze the origin of the IPOA. It is found that the IPOA primarily results from the segregation of indium atoms in the In Ga N/Ga N Qdisks. This work highlights the significant influence of substrate materials on the IPOA of semiconductor heterostructures.展开更多
Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characte...Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.展开更多
The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:...The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:1,ultrasonication time of 30 min,rotary evaporation temperature of 50°C,and a drug-to-carrier mass ratio of 1:7.The results of the dissolution and solubility experiments showed that the dissolution rate and solubility of the optimized solid dispersion were significantly improved compared to pure GEN.Comprehensive characterization of the GEN-SD using X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,and Fourier transform infrared spectroscopy clarified variations in crystalline form,thermal properties,and microscopic morphology.Antioxidant experiments showed that GEN-SD exhibited antioxidant activity and could effectively scavenge various free radicals.Stability studies demonstrated that GEN-SD was stable at a high temperature of 60℃and a light intensity of 4500 lx.展开更多
Nanomaterials are extensively utilized in a multitude of sectors,but their propensity to aggregate can considerably diminish the efficacy of functional materials.A pivotal challenge in this domain is achieving a homog...Nanomaterials are extensively utilized in a multitude of sectors,but their propensity to aggregate can considerably diminish the efficacy of functional materials.A pivotal challenge in this domain is achieving a homogenous distribution of nanomaterials,which is essential for enhancing their performance while also reducing production costs.In this work,we achieve uniform and stable dispersion of various nano-materials through the confinement effect generated by the stereocomplex cross-linked network formed by the combination of poly(L-lactic)acid and poly(D-lactic)acid.The unique confinement effect of poly-lactic acid(PLA)isomers is universal and significantly enhances the dispersion of nanomaterials in both PLA solutions and films.To demonstrate the efficacy of our approach,we disperse aggregation-induced emission(AIE)molecules within PLA,which leads to the production of PLA films exhibiting improved fluorescence property.This work provides an effective solution for the preparation of nanocomposite ma-terials that are both high-performing and cost-efficient.展开更多
Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically ...Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.展开更多
Missiles provide long-range precision strike capabilities and have become a cornerstone of modern warfare.The contrail clouds formed by missile during their active flight phase present significant chal-lenges to high-...Missiles provide long-range precision strike capabilities and have become a cornerstone of modern warfare.The contrail clouds formed by missile during their active flight phase present significant chal-lenges to high-altitude environmental observation and target detection and tracking.Existing studies primarily focus on specific airspace regions,leaving critical gaps in understanding the effects of long dispersion times,wide altitude ranges,and variable atmospheric conditions on missile contrail clouds.To address these gaps,this article develops a numerical method based on the Lagrangian random walk model,which incorporates various velocity variation terms,including particle velocity caused by the difference of wind field,by the thermal motion of local gas molecules and by random collisions between contrail cloud particles to capture the influence of environmental wind fields,atmospheric conditions,and particle concentrations on the motion of contrail cloud particles.A general coordinate system aligned with the missile's flight trajectory is employed to represent particle distribution characteristics.The proposed method is in good agreement with the conducted experiments as well as with the available numerical simulations.The results demonstrate that the proposed model effectively simulates the dispersion state of contrail clouds,accurately reflecting the impact of large-scale wind field variations and altitude changes with high computational efficiency.Additionally,simulation results indicate that the increased distance between gas molecules in rarefied environments facilitates enhanced particle dispersion,while larger particles exhibit a faster dispersion rate due to their greater mass.展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.11872105,12072022,11911530176,and 12202039)。
文摘In this paper,the dispersion,attenuation,and bandgap characteristics of in-plane coupled Bloch waves in one-dimensional piezoelectric semiconductor(PSC)phononic crystals are investigated,emphasizing the influence of positive-negative(PN)junctions.Unlike piezoelectric phononic crystals,the coupled Bloch waves in PSC phononic crystals are attenuated due to their semiconductor properties,and thus the solution of Bloch waves becomes more complicated.The transfer matrix of the phononic crystal unit cell is obtained using the state transfer equation.By applying the Bloch theorem for periodic structures,the dispersion relation of the coupled Bloch waves is derived,and the dispersion,attenuation,and bandgap are obtained in the complex wave number domain.It is found that the influence of the PN junction cannot be neglected.Moreover,the effects of the PN junction under different apparent wave numbers and steady-state carrier concentrations are provided.This indicates the feasibility of adjusting the propagation characteristics of Bloch waves through the regulation of the PN heterojunction.
基金Supported by the National Natural Science Foundation of China(Grant No.51975004)the Outstanding Youth Fund of Universities in Anhui Province of China(Grant No.2022AH020032).
文摘One-dimensional ensemble dispersion entropy(EDE1D)is an effective nonlinear dynamic analysis method for complexity measurement of time series.However,it is only restricted to assessing the complexity of one-di-mensional time series(TS1d)with the extracted complexity features only at a single scale.Aiming at these problems,a new nonlinear dynamic analysis method termed two-dimensional composite multi-scale ensemble Gramian dispersion entropy(CMEGDE_(2D))is proposed in this paper.First,the TS_(1D) is transformed into a two-dimensional image(I_(2D))by using Gramian angular fields(GAF)with more internal data structures and geometri features,which preserve the global characteristics and time dependence of vibration signals.Second,the I2D is analyzed at multiple scales through the composite coarse-graining method,which overcomes the limitation of a single scale and provides greater stability compared to traditional coarse-graining methods.Subsequently,a new fault diagnosis method of rolling bearing is proposed based on the proposed CMEGDE_(2D) for fault feature ex-traction and the chicken swarm algorithm optimized support vector machine(CsO-SvM)for fault pattern identification.The simulation signals and two data sets of rolling bearings are utilized to verify the effectiveness of the proposed fault diagnosis method.The results demonstrate that the proposed method has stronger dis-crimination ability,higher fault diagnosis accuracy and better stability than the other compared methods.
基金supported by the Chinese National Natural Science Foundation under Grant Nos.(41975181,42325503,42375197,42575207,42205090)Y.LIU is supported by the U.S.Department of Energy’s Atmospheric System Research(ASR)program.
文摘The relative dispersion of cloud and fog droplets has significant impacts on aerosol indirect effects,radiative transfer,and microphysical processes.However,previous studies have been mostly concerned with clouds,with limited studies on fog,particularly those that examine the combined influences of all key physical processes and their roles during fog evolution.As such,this study aims to conduct a comprehensive investigation by examining the relationships between relative dispersion and other microphysical variables,as well as the underlying microphysical and dynamic processes,based on field fog campaigns in polluted and clean conditions.In polluted fog,droplet concentrations are higher,leading to smaller droplets and increased dispersion.The correlation between dispersion and droplet volume-mean radius is positive in the polluted fog,but shifts to negative in clean fog.We attribute the difference to various microphysical processes like aerosol activation,condensation,collision-coalescence,and entrainment-mixing.In polluted fog,high aerosol concentrations,low supersaturations,and strong turbulence(entrainment-mixing)provide suitable conditions for the simultaneous occurrence of droplet condensation and aerosol activation,resulting in a positive correlation between dispersion and volume-mean radius,especially during the fog formation stage.In contrast,during the mature stage in clean fog,condensation is dominant with weak aerosol activation leading to a negative correlation between relative dispersion and volume-mean radius.The collision-coalescence process is more active in the mature stage,increasing radii and leading to the negative correlation between dispersion and volume-mean radius.This result sheds new light on understanding the relative dispersion and mechanisms in fog under different aerosol backgrounds.
基金funded by the National Key Research&Development Program of China(grant no 2022YFB3705705)the National Natural Science Foundation of China(grant nos.52301142,52371107,52201115)+3 种基金the Heilongjiang Provincial Postdoctoral Science Foundation(grant no LBH-11Z22167)The Fundamental Research Funds for the Central Universities(grant no HIT.OCEF.2024035)The Science and Technology Innovation Program of Hunan Province(grant no 2022RC4012)The Shanxi Provincial Science and Technology Major Special Project plan of“Taking the lead in unveiling the list”[grant nos.202201050201012].
文摘Nanoparticle-reinforced Mg matrix composites(NPMMCs)capitalize on the synergistic properties of nanoparticles and Mg matrix,resulting in enhanced mechanical attributes compared to matrix.Nonetheless,effective high-temperature dispersion of nanoparticles remains challenging.This study employs a molten salt dispersant(NaCl-KCl-MgCl_(2))effectively mitigating the oxidation and combustion of TiC nanoparticles(TiC_(np)).Compared with the atmosphere,the molten salt facilitates the pre-dispersion of TiC_(np)through thermal motion at elevated temperatures,thereby reducing agglomeration between the TiC_(np).Simultaneously,the molten salt effectively wets and disrupts the oxide layer on the surface of Mg melt,facilitating the wetting of TiC_(np)by the Mg melt.The successful incorporation of 3 vol.%TiC_(np)into the Mg matrix is achieved by utilizing molten salt,and the addition of TiC_(np)increases the viscosity of mg melt.Further dispersed by ultrasonic dispersion,the unique distribution of TiC_(np)within ring-like structures was obtained which was attributed to the increase of viscosity.As a configurational distribution,the ring-like TiC_(np)distribution morphology significantly enhances the mechanical properties of composites,as evidenced by an approximate 50%increase in compressive strength(UCS).
基金Supported by“Continuation”Project of Excellent Doctors,Guangdong Basic and Applied Basic Research Foundation,No.2025A04J5082Guangdong Basic and Applied Basic Research Foundation,No.2024A1515011236.
文摘This letter addresses challenges in the clinical translation of BIBR1532,a promising telomerase inhibitor,for the treatment of esophageal squamous cell carcinoma(ESCC).BIBR1532 exerts its anti-cancer effect by activating DNA damage response(ATR/CHK1 and ATM/CHK2)pathways and downregulating telomere-binding proteins.Although its therapeutic potential is limited by poor aqueous solubility,solid dispersion(SD)technology may overcome this obstacle.Systematic analysis using PubChem-derived simplified molecular input line entry system identifiers and artificial intelligence-driven FormulationDT platform evaluation(oral formulation feasibility index:0.38)revealed that the SD technology,with superior scalability(32 approved products by 2021)and lower production risks,outperforms lipid-based formulations as an optimal dissolution strategy.Material analysis revealed hydroxypropyl methylcellulose(HPMC)as the optimal carrier with lower hygroscopicity,higher temperature and no intestinal targeting,thus enabling ESCC therapy.HPMC-based SD enhances BIBR1532 solubility and bioavailability for effective ESCC treatment.Future studies should focus on pilot tests for SD fabrication.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金supported by the National Institute of Environmental Research(NIER)funded by the Ministry of Environment(No.NIER-2019-04-02-039)supported by Particulate Matter Management Specialized Graduate Program through the Korea Environmental Industry&Technology Institute(KEITI)funded by the Ministry of Environment(MOE).
文摘Fine particulatematter(PM_(2.5))samples were collected in two neighboring cities,Beijing and Baoding,China.High-concentration events of PM_(2.5) in which the average mass concentration exceeded 75μg/m^(3) were frequently observed during the heating season.Dispersion Normalized Positive Matrix Factorization was applied for the source apportionment of PM_(2.5) as minimize the dilution effects of meteorology and better reflect the source strengths in these two cities.Secondary nitrate had the highest contribution for Beijing(37.3%),and residential heating/biomass burning was the largest for Baoding(27.1%).Secondary nitrate,mobile,biomass burning,district heating,oil combustion,aged sea salt sources showed significant differences between the heating and non-heating seasons in Beijing for same period(2019.01.10–2019.08.22)(Mann-Whitney Rank Sum Test P<0.05).In case of Baoding,soil,residential heating/biomass burning,incinerator,coal combustion,oil combustion sources showed significant differences.The results of Pearson correlation analysis for the common sources between the two cities showed that long-range transported sources and some sources with seasonal patterns such as oil combustion and soil had high correlation coefficients.Conditional Bivariate Probability Function(CBPF)was used to identify the inflow directions for the sources,and joint-PSCF(Potential Source Contribution Function)was performed to determine the common potential source areas for sources affecting both cities.These models facilitated a more precise verification of city-specific influences on PM_(2.5) sources.The results of this study will aid in prioritizing air pollution mitigation strategies during the heating season and strengthening air quality management to reduce the impact of downwind neighboring cities.
文摘Graphene and its derivatives are two-dimensional nanomaterials with exceptional physical and chemical properties.Research has shown that their addition can counter the inherent deficiencies of cementbased composites,including low tensile strength,poor toughness,and high susceptibility to cracking.However,because of its high specific surface area and the van der Waals force between layers,graphene is prone to agglomerate in the cement matrix which can make the properties worse.Hence,improving the graphene dispersion is essential.The surface structure and properties of graphene and its derivatives are first introduced,and the different methods for their dispersion in cement-based materials are reviewed.Their effects on the mechanical properties and durability of cement-based materials are then summarized.Based on these results,the microscopic and nanoscopic mechanisms of the way graphene and its derivatives affect cement-based materials are elaborated.Current problems and future trends in this research area are then considered.
文摘For segmented detectors,surface flatness is critical as it directly influences both energy resolution and image clarity.Additionally,the limited adjustment range of the segmented detectors necessitates precise benchmark construction.This paper proposes an architecture for detecting detector flatness based on channel spectral dispersion.By measuring the dispersion fringes for coplanar adjustment,the final adjustment residual is improved to better than 300 nm.This result validates the feasibility of the proposed technology and provides significant technical support for the development of next-generation large-aperture sky survey equipment.
文摘The evolution of microstructure and texture in Mg-3Al-1Zn-1Ca alloy sheets subjected to in-plane shear(IPS)loading was investigated using experimental techniques and viscoplastic self-consistent(VPSC)modeling.The specimens were deformed under varying degrees of IPS strain(γ12=0.05,0.10,and 0.15)using a customized jig.Electron backscatter diffraction(EBSD)observations revealed profuse tensile twinning(TTW)even at an IPS strain of 0.05,with its intensity continuously increased as the IPS strain increased.The TTWs progressively engulfed parent grains with increasing shear strain,evolving into an unusual deformation twin morphology.Furthermore,VPSC model predictions confirmed basal slip as the dominant deformation mode at low IPS strains,transitioning to prismatic slip dominance at higher IPS strains.The activity of the TTW mode was significantly higher during the initial stages of IPS strain and saturated to lower values at higher strains.VPSC simulation results also indicated preferential shear accumulation on a single twin system,explaining the phenomenon of a single twin variant engulfing a parent grain.Additionally,the influence of individual slip and twin modes on texture evolution was evaluated through orientation tracking of representative grains at various shear strain increments using VPSC simulation.The simulation results quantitatively highlighted the activities of basal slip,prismatic slip,and tensile twinning,establishing a correlation between texture evolution and the underlying deformation mechanisms.
基金Project(52174239)supported by the National Natural Science Foundation of ChinaProject(2021YFC2902400)supported by the National Key R&D Program of China。
文摘The chemical composition of seawater affects the desulfurization of chalcopyrite in flotation.In this study,desulfurization experiments of chalcopyrite were conducted in both deionized(DI)water and seawater.The results showed that,the copper grade of the concentrate obtained from seawater flotation decreased to 24.30%,compared to 24.60%in DI water.Concurrently,the recovery of chalcopyrite decreased from 51.39%to 38.67%,while the selectivity index(SI)also had a reduction from 2.006 to 1.798.The incorporation of ethylene diamine tetraacetic acid(EDTA),sodium silicate(SS),and sodium hexametaphosphate(SHMP)yielded an enhancement in the SI value,elevating it from 1.798 to 1.897,2.250 and 2.153,separately.It is particularly noteworthy that an excess of EDTA resulted in a SI value of merely 1.831.The mechanism of action was elucidated through analysis of surface charge measurements,X-ray photoelectron spectroscopy(XPS),Fourier transform infrared spectroscopy(FT-IR),extended Derjaguin-Landau Verwey-Overbeek(E-DLVO)theory,and density functional theory(DFT)calculations.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62488201 and 1240041502)the Ministry of Science and Technology of China(Grant No.2022YFA1204100)+1 种基金the Chinese Academy of Sciences(Grant No.XDB33030100)the Innovation Program of Quantum Science and Technology(Grant No.2021ZD0302700)。
文摘Two-dimensional van der Waals(vdW)magnetic materials,characterized by their tunable magnetism,spin transport properties,and remarkable quantum effects,provide significant promise for the development of efficient,low-power spintronic devices.Intriguingly,the rare earth tritelluride(RTe3)materials have attracted great attention due to their unique magnetic structure,exotic electronic properties,multiple charge density wave(CDW),and superconductivity under pressure.Here,we report the successful synthesis of high-quality DyTe_(3)single crystals using a self-flux method.DyTe_(3)shows an antiferromagnetic transition at 4.5 K and demonstrates the magnetic field-induced ferromagnetism.The high-quality DyTe_(3)single crystal demonstrates outstanding transport properties,featuring a high carrier mobility of approximately1.4×10^(4)cm^(2)·V^(-1)·s^(-1)and large linear magnetoresistance of 1300%.Furthermore,distinct Shubnikov-de Haas(SdH)oscillations are observed in DyTe_(3),revealing a small Fermi pocket and an effective mass of 0.24 me.Remarkably,the unconventional in-plane negative magnetoresistances appear along the a-axis below 2 T and c-axis until 9 T from 2 K to17 K,which are attributed to the complex helimagnetic structures caused by CDW coupling and weak single-ion anisotropy.Our findings offer a significant platform for understanding the complex magnetoresistance behavior and quantum transport effects in RTe3-type materials,holding great promise for advancing applications in electronic and spintronic devices.
基金supported by the National Natural Science Foundation of China(Nos.22175060 and 22376062)JSPS Grant-in-Aid for Scientific Research(Nos.JP21H05235,JP22H05478 and JP22F22358)+1 种基金China Postdoctoral Science Foundation(No.2022M722867)the Key Research Project of Higher Education Institutions in Henan Province(No.23A530001).
文摘Exploring earth-abundant,highly active bifunctional electrocatalysts for efficient hydrogen and oxygen evolution is crucial for water splitting.However,due to their distinct free energies and conducting behaviors(electron/hole),balancing the catalytic efficiency between hydrogen and oxygen evolution remains challenging for achieving bifunctional electrocatalysts.Here,we report a locally-doped MoS_(2)monolayer with an in-plane heterostructure acting as a bifunctional electrocatalyst and apply it to the overall water splitting.In this heterostructure,the core region contains Mo/S vacancies,while the ring region was doped by Fe atoms(in two substitution configurations:1FeMo and 3FeMo-VS clusters)with a p-type conductive characteristic.Our micro-cell measurements,combined with density functional theory(DFT)calculations,reveal that the vacancies-rich core region presents remarkable hydrogen evolution reaction(HER)activity while the Fe-doped ring gives an excellent oxygen evolution reaction(OER)activity,thus forming an in-plane bifunctional electrocatalyst.Finally,as a proof-of-concept for overall water splitting,we constructed a full-cell configuration based on a locally-doped MoS_(2)monolayer,which achieved a cell voltage of 1.87 V at 10 mA·cm^(-2),demonstrating outstanding performance in strong acid electrolytes.Our work provides insight into the hetero-integration of bifunctional electrocatalysts at the atomic level,paving the way for designing transition metal dichalcogenide catalysts with activity-manipulated regions capable of multiple reactions.
基金supported by the Fundamental Research Funds for the Central Universities (No.2024JBZY021)the National Natural Science Foundation of China (No.61575018)。
文摘Reverse design of highly GeO2-doped silica optical fibers with broadband and flat dispersion profiles is proposed using a neural network(NN) combined with a particle swarm optimization(PSO) algorithm.Firstly,the NN model designed to predict optical fiber dispersion is trained with an appropriate choice of hyperparameters,achieving a root mean square error(RMSE) of 9.47×10-7on the test dataset,with a determination coefficient(R2) of 0.999.Secondly,the NN is combined with the PSO algorithm for the inverse design of dispersion-flattened optical fibers.To expand the search space and avoid particles becoming trapped in local optimal solutions,the PSO algorithm incorporates adaptive inertia weight updating and a simulated annealing algorithm.Finally,by using a suitable fitness function,the designed fibers exhibit flat group velocity dispersion(GVD) profiles at 1 400—2 400 nm,where the GVD fluctuations and minimum absolute GVD values are below 18 ps·nm-1·km-1and 7 ps·nm-1·km-1,respectively.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 62074036, 61674038, and 11574302)Foreign Cooperation Project of Fujian Province (Grant No. 2023I0005)+2 种基金Open Research Fund Program of the State Key Laboratory of Low-Dimensional Quantum Physics (Grant No. KF202108)the National Key Research and Development Program (Grant No. 2016YFB0402303)the Foundation of Fujian Provincial Department of Industry and Information Technology of China (Grant No. 82318075)。
文摘The in-plane optical anisotropy(IPOA) of c-plane In Ga N/Ga N quantum disks(Qdisks) in nanowires grown on MoS_(2)/Mo and Ti/Mo substrates is investigated using reflectance difference spectroscopy(RDS) at room temperature. A large IPOA related to defect or impurity states is observed. The IPOA of samples grown on MoS_(2)/Mo is approximately one order of magnitude larger than that of samples grown on Ti/Mo substrates. Numerical calculations based on the envelope function approximation have been performed to analyze the origin of the IPOA. It is found that the IPOA primarily results from the segregation of indium atoms in the In Ga N/Ga N Qdisks. This work highlights the significant influence of substrate materials on the IPOA of semiconductor heterostructures.
文摘Dispersion characteristics of magnonic crystals have attracted considerable attention because of the potential applications for spin-wave devices.In this work,we investigated the strain-manipulated dispersion characteristics of magnonic crystals with Dzyaloshinskii–Moriya interaction(DMI)and discussed the potential applications in spin-wave devices.Here,the ground states and stabilities of the magnonic crystals were investigated.Then,the strain-manipulated dispersion characteristics of the magnonic crystals based on domains and skyrmions were studied.The simulation results indicated that,the applied strain could manipulate the band widths and the positions of the allowed frequency bands.Finally,the realization of magnonic crystal heterojunctions and potential applications in spin-wave devices,such as filters,diodes,and transistors based on strain-manipulated magnonic crystals were proposed.Our research provides a theoretical foundation for designing tunable spin-wave devices based on strain-manipulated magnonic crystals with DMI.
基金supported by department of Education of Liaoning Province(Natural Science,Strategic Industrialization Project)(LJ212410163061).
文摘The aim of this study was to enhance the applicability of genistein(GEN)and investigate genistein solid dispersion(GEN-SD).The optimal process parameters were determined as follows:anhydrous ethanol volume ratio of 4:1,ultrasonication time of 30 min,rotary evaporation temperature of 50°C,and a drug-to-carrier mass ratio of 1:7.The results of the dissolution and solubility experiments showed that the dissolution rate and solubility of the optimized solid dispersion were significantly improved compared to pure GEN.Comprehensive characterization of the GEN-SD using X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,and Fourier transform infrared spectroscopy clarified variations in crystalline form,thermal properties,and microscopic morphology.Antioxidant experiments showed that GEN-SD exhibited antioxidant activity and could effectively scavenge various free radicals.Stability studies demonstrated that GEN-SD was stable at a high temperature of 60℃and a light intensity of 4500 lx.
基金supported by the National Key R&D Program of China(No.2022YFB3804204)the National Natural Science Foundation of China(Nos.52127805,52102090,12172005,and 12325202)+1 种基金the Fundamental Research Funds for the Central Uni-versities(No.2232022D-04)the Innovation and Development Sup-port Plan for Key Industries in Southern Xinjiang(No.2022DB011).
文摘Nanomaterials are extensively utilized in a multitude of sectors,but their propensity to aggregate can considerably diminish the efficacy of functional materials.A pivotal challenge in this domain is achieving a homogenous distribution of nanomaterials,which is essential for enhancing their performance while also reducing production costs.In this work,we achieve uniform and stable dispersion of various nano-materials through the confinement effect generated by the stereocomplex cross-linked network formed by the combination of poly(L-lactic)acid and poly(D-lactic)acid.The unique confinement effect of poly-lactic acid(PLA)isomers is universal and significantly enhances the dispersion of nanomaterials in both PLA solutions and films.To demonstrate the efficacy of our approach,we disperse aggregation-induced emission(AIE)molecules within PLA,which leads to the production of PLA films exhibiting improved fluorescence property.This work provides an effective solution for the preparation of nanocomposite ma-terials that are both high-performing and cost-efficient.
基金supported in part by the National Natural Science Foundation of China under Grant 41874143 and Grant 42374163in part by the Key Program of Natural Science Foundation of Sichuan Province of China under Grant 2023NSFSC0019in part by the Central Funds Guiding the Local Science and Technology Development under Grant 2024ZYD0124.
文摘Multiphase flow in porous rock is of great importance in the application of many industrial processes,including reservoir delineation,enhanced oil recovery,and CO_(2) sequestration.However,previous research typically investigated the dispersive behaviors when rock saturated with single or two-phase fluids and conducted limited studies on three-phase immiscible fluids.This study investigated the seismic dispersion,attenuation,and reflection features of seismic waves in three-phase immiscible fluidsaturated porous rocks.First,we proposed the calculation formulas of effective fluid modulus and effective fluid viscosity of multiphase immiscible fluids by taking into account the capillary pressure,reservoir wettability,and relative permeability simultaneously.Then,we analysed the frequencydependent behaviors of three-phase immiscible fluid-saturated porous rock under different fluid proportion cases using the Chapman multi-scale model.Next,the seismic responses are analysed using a four-layer model.The results indicate that the relative permeability,capillary pressure parameter,and fluid proportions are all significantly affect dispersion and attenuation.Comparative analyses demonstrate that dispersion and attenuation can be observed within the frequency range of seismic exploration for a lower capillary parameter a3 and higher oil content.Seismic responses reveal that the reflection features,such as travel time,seismic amplitude,and waveform of the bottom reflections of saturated rock and their underlying reflections are significantly dependent on fluid proportions and capillary parameters.For validation,the numerical results are further verified using the log data and real seismic data.This numerical analysis helps to further understand the wave propagation characteristics for a porous rock saturated with multiphase immiscible fluids.
文摘Missiles provide long-range precision strike capabilities and have become a cornerstone of modern warfare.The contrail clouds formed by missile during their active flight phase present significant chal-lenges to high-altitude environmental observation and target detection and tracking.Existing studies primarily focus on specific airspace regions,leaving critical gaps in understanding the effects of long dispersion times,wide altitude ranges,and variable atmospheric conditions on missile contrail clouds.To address these gaps,this article develops a numerical method based on the Lagrangian random walk model,which incorporates various velocity variation terms,including particle velocity caused by the difference of wind field,by the thermal motion of local gas molecules and by random collisions between contrail cloud particles to capture the influence of environmental wind fields,atmospheric conditions,and particle concentrations on the motion of contrail cloud particles.A general coordinate system aligned with the missile's flight trajectory is employed to represent particle distribution characteristics.The proposed method is in good agreement with the conducted experiments as well as with the available numerical simulations.The results demonstrate that the proposed model effectively simulates the dispersion state of contrail clouds,accurately reflecting the impact of large-scale wind field variations and altitude changes with high computational efficiency.Additionally,simulation results indicate that the increased distance between gas molecules in rarefied environments facilitates enhanced particle dispersion,while larger particles exhibit a faster dispersion rate due to their greater mass.
