The reducing property of pellets prepared by ultrafine magnetite concentrate(UMC)and improving method were revealed.The results show that the reduction degree of UMC pellets is only about 56%compared with that of pell...The reducing property of pellets prepared by ultrafine magnetite concentrate(UMC)and improving method were revealed.The results show that the reduction degree of UMC pellets is only about 56%compared with that of pellets prepared from ordinary iron ore concentrate with relatively coarse particle size,which is significantly lower than the general reduction degree of about 70%.When the composite binder composed of bentonite and organic binder was added,the reduction degree was significantly increased to 69.66%.The revealed mechanism shows that the reduced pellets with common bentonite have a concentric structure,the oxidation gap between the inner and outer layers is obvious,and the outer dense oxide layer hinders the oxidation and reduction of the inner layer.After adding the composite binder,the organic components significantly improved the internal porosity of the pellets and the aggregation degree of ultrafine iron ore concentrate particles in the granulation process,forming a porous structure.The non-uniform double-layer structure is eliminated,and the increased pores are conducive to the internal diffusion of CO,and finally the reduction degree of pellets is increased to the level equivalent to that of ordinary magnetite pellets.展开更多
An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal...An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal- to-noise ratio data from all experimental data and then to use these selected data for elliptical imaging. Tile relationships among imaging accuracy, distance coefficient and residual direct wave are investigated, and then the residual direct wave is introduced to make the engineering application more convenient. The effectiveness of the proposed method is evaluated experimentally by sparse transducer array of a rectangle, and the results reveal that selecting experimental data of smaller distance coefficient can effectively improve imaging accuracy. Moreover, the direct wave difference increases with the decrease of the distance coefficient, which implies that the imaging accuracy can be effectively improved by using the experimental data of the larger direct wave difference.展开更多
For its outstanding aerodynamic capabilities,the integrated design of the waverider and inlet is widely accepted in hypersonic aircraft.Three aspects of the integrated design of the waverider and inlet since 2020 are ...For its outstanding aerodynamic capabilities,the integrated design of the waverider and inlet is widely accepted in hypersonic aircraft.Three aspects of the integrated design of the waverider and inlet since 2020 are mainly described in this paper.Firstly,the advantages and shortcomings of the conventional integrated design are examined.Then,different layouts of integrated design are proposed,and the aerodynamic perfor-mance optimization methods of the waverider,inlet,and their coupling are introduced.Besides,a series of methods for increasing the calculating accuracy of the waverider and inlet are presented,and the focus of attention is to consider the lateral flow problem.展开更多
Soil improvement is one of the most important issues in geotechnical engineering practice.The wide application of traditional improvement techniques(cement/chemical materials)are limited due to damage ecological en-vi...Soil improvement is one of the most important issues in geotechnical engineering practice.The wide application of traditional improvement techniques(cement/chemical materials)are limited due to damage ecological en-vironment and intensify carbon emissions.However,the use of microbially induced calcium carbonate pre-cipitation(MICP)to obtain bio-cement is a novel technique with the potential to induce soil stability,providing a low-carbon,environment-friendly,and sustainable integrated solution for some geotechnical engineering pro-blems in the environment.This paper presents a comprehensive review of the latest progress in soil improvement based on the MICP strategy.It systematically summarizes and overviews the mineralization mechanism,influ-encing factors,improved methods,engineering characteristics,and current field application status of the MICP.Additionally,it also explores the limitations and correspondingly proposes prospective applications via the MICP approach for soil improvement.This review indicates that the utilization of different environmental calcium-based wastes in MICP and combination of materials and MICP are conducive to meeting engineering and market demand.Furthermore,we recommend and encourage global collaborative study and practice with a view to commercializing MICP technique in the future.The current review purports to provide insights for engineers and interdisciplinary researchers,and guidance for future engineering applications.展开更多
learning while making the teaching process more targeted and effective.Motivation,as the key factor driving individuals to take action and achieve specific goals,directly affects students’enthusiasm and creativity.Te...learning while making the teaching process more targeted and effective.Motivation,as the key factor driving individuals to take action and achieve specific goals,directly affects students’enthusiasm and creativity.Teaching strategies based on motivation can improve educational outcomes.The Self-Determination Theory provides a framework for enhancing students’intrinsic motivation,emphasizing the fulfillment of three basic psychological needs:autonomy,competence,and relatedness.Satisfying these needs allows students to demonstrate stronger learning motivation and sustained interest.Higher education instructors can support autonomy by giving students more choices,allowing them to create based on their interests,thus fostering creativity and increasing engagement.Additionally,teachers should provide competence support by setting appropriately challenging tasks,helping students gradually improve their skills and confidence,and enhancing their sense of competence.Finally,relatedness support emphasizes creating a collaborative learning environment where students can strengthen emotional connections and perceive the value of learning through group cooperation and discussions.Optimizing visual design education not only requires attention to motivation issues but also necessitates designing teaching strategies based on the Self-Determination Theory.Through support for autonomy,competence,and relatedness,educators can effectively stimulate students’intrinsic motivation,and enhance their creativity,problem-solving abilities,and interest in long-term learning.This approach makes education more meaningful and valuable,helping to cultivate more outstanding design talents.展开更多
Sponge city(SPC)is proposed to solve the issues such as the degradation of urban water ecosystem environment,imbalanced water resource allocation,urban water logging,and water contamination.The PPP(Public Private Part...Sponge city(SPC)is proposed to solve the issues such as the degradation of urban water ecosystem environment,imbalanced water resource allocation,urban water logging,and water contamination.The PPP(Public Private Partnership)model is combined to release the government pressure of SPC project construction.The development of the SPC-PPP model makes significant contributions to the sustainable development and the enhancement of urban resilience against water-related disasters.However,there is no scientific performance evaluation system on its operation period has been conducted.Therefore,the SPC-PPP Evaluation model aims to objectively and reasonably assess project effectiveness,promote its development and refine the evaluation framework.This paper has set up the MEE model for performance evaluation,with improved Matter-Element Extension method to assign values to the evaluation indices.The research results show that:(1)The MEE model is more accurate in the performance evaluation and its effectiveness is reflected in its ability to capture the correlation among different indices in the same membership,rather than merely focusing on individual indices.(2)The proposed approach provided a new aspect for performance evaluation,improving the accuracy of evaluation and promoting the development of SPC-PPP project.展开更多
In this paper,we develop an advanced computational framework for the topology optimization of orthotropic materials using meshless methods.The approximation function is established based on the improved moving least s...In this paper,we develop an advanced computational framework for the topology optimization of orthotropic materials using meshless methods.The approximation function is established based on the improved moving least squares(IMLS)method,which enhances the efficiency and stability of the numerical solution.The numerical solution formulas are derived using the improved element-free Galerkin(IEFG)method.We introduce the solid isotropic microstructures with penalization(SIMP)model to formulate a mathematical model for topology opti-mization,which effectively penalizes intermediate densities.The optimization problem is defined with the numerical solution formula and volume fraction as constraints.The objective function,which is the minimum value of flexibility,is optimized iteratively using the optimization criterion method to update the design variables efficiently and converge to an optimal solution.Sensitivity analysis is performed using the adjoint method,which provides accurate and efficient gradient information for the optimization algorithm.We validate the proposed framework through a series of numerical examples,including clamped beam,cantilever beam,and simply supported beam made of orthotropic materials.The convergence of the objective function is demonstrated by increasing the number of iterations.Additionally,the stability of the iterative process is analyzed by examining the fluctuation law of the volume fraction.By adjusting the parameters to an appropriate range,we achieve the final optimization results of the IEFG method without the checkerboard phenomenon.Comparative studies between the Element-Free Galerkin(EFG)and IEFG methods reveal that both methods yield consistent optimization results under identical parameter settings.However,the IEFG method significantly reduces computational time,highlighting its efficiency and suitability for orthotropic materials.展开更多
The stability of the tunnel portal slope is crucial for ensuring safe tunnel construction.Thus,a sound stability evaluation is of significance.Given the unique geological characteristics of tunnel portal slopes,it is ...The stability of the tunnel portal slope is crucial for ensuring safe tunnel construction.Thus,a sound stability evaluation is of significance.Given the unique geological characteristics of tunnel portal slopes,it is necessary to establish a specific evaluation indicator system that differs from those used for ordinary slopes.Based on the unascertained measure method,uncertainties in the indicator are addressed by introducing the left and right half cloud asymmetric cloud model to optimize the linear membership function.The subjectivity of confidence criterion level identification is also improved by using the Euclidean distance method.Thus,a stability evaluation model for the tunnel portal slope is established based on the improved unascertained measure method.Finally,using the collected tunnel portal slope data,the results of four evaluation methods are compared with the safety factor levels.The evaluation methods include the traditional unascertained measure method,the method improved by using the left and right half cloud asymmetric cloud model,the method improved by using the Euclidean distance method,and the method improved by using both the left and right half cloud asymmetric cloud model and the Euclidean distance method.The results show that the accuracy rates of these four methods are 50%,55%,85%,and 90%,respectively.Among them,the joint improvement method has the slightest deviation,with only one level,while the other three methods had deviations of two levels.This result verifies the stability and effectiveness of the joint improvement method,providing a reference for tunnel portal slope stability evaluation.展开更多
The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experi...The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experimental analysis of the evolution process of the short-circuit arc to the secondary arc is critical.In this study,an improved charge simulation method was used to develop the internal-space electric-field model of the short-circuit arc.The intensity of the electric field was used as an independent variable to describe the initial shape of the secondary arc.A secondary arc evolution model was developed based on this model.Moreover,the accuracy of the model was evaluated by comparison with physical experimental results.When the secondary arc current increased,the arcing time and dispersion increased.There is an overall trend of increasing arc length with increasing arcing time.Nevertheless,there is a reduction in arc length during arc ignition due to short circuits between the arc columns.Furthermore,the arcing time decreased in the range of 0°-90°as the angle between the wind direction and the x-axis increased.This work investigated the method by which short-circuit arcs evolve into secondary arcs.The results can be used to develop the secondary arc evolution model and to provide both a technical and theoretical basis for secondary arc suppression.展开更多
This study proposes an effective method to enhance the accuracy of the Differential Quadrature Method(DQM)for calculating the dynamic characteristics of functionally graded beams by improving the form of discrete node...This study proposes an effective method to enhance the accuracy of the Differential Quadrature Method(DQM)for calculating the dynamic characteristics of functionally graded beams by improving the form of discrete node distribution.Firstly,based on the first-order shear deformation theory,the governing equation of free vibration of a functionally graded beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam axial displacement,transverse displacement,and cross-sectional rotation angle by considering the effects of shear deformation and rotational inertia of the beam cross-section.Then,ignoring the shear deformation of the beam section and only considering the effect of the rotational inertia of the section,the governing equation of the beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam transverse displacement.Based on the differential quadrature method theory,the eigenvalue problem of ordinary differential equations is transformed into the eigenvalue problem of standard generalized algebraic equations.Finally,the first several natural frequencies of the beam can be calculated.The feasibility and accuracy of the improved DQM are verified using the finite element method(FEM)and combined with the results of relevant literature.展开更多
Geometric error is the main factor affecting the machining accuracy of hybrid machine tools.Kinematic calibration is an effective way to improve the geometric accuracy of hybrid machine tools.The necessity to measure ...Geometric error is the main factor affecting the machining accuracy of hybrid machine tools.Kinematic calibration is an effective way to improve the geometric accuracy of hybrid machine tools.The necessity to measure both position and orientation at each pose,as well as the instability of identification in case of incomplete measurements,severely affects the application of traditional calibration methods.In this study,a kinematic calibration method with high measurement efficiency and robust identification is proposed to improve the kinematic accuracy of a five-axis hybrid machine tool.First,the configuration is introduced,and an error model is derived.Further,by investigating the mechanism error characteristics,a measurement scheme that only requires tool centre point position error measurement and one alignment operation is proposed.Subsequently,by analysing the effects of unmeasured degrees of freedom(DOFs)on other DOFs,an improved nonlinear least squares method based on virtual measurement values is proposed to achieve stable parameter identification in case of incomplete measurement,without introducing additional parameters.Finally,the proposed calibration method is verified through simulations and experiments.The proposed method can efficiently accomplish the kinematic calibration of the hybrid machine tool.The accuracy of the hybrid machine tool is significantly improved after calibration,satisfying actual aerospace machining requirements.展开更多
[Objective] This study aimed at comparing the four extraction methods of genomic DNA from Clematis fasciculiflora Franch and determining the optimal extraction method for extracting the genomic DNA from Clematis fasci...[Objective] This study aimed at comparing the four extraction methods of genomic DNA from Clematis fasciculiflora Franch and determining the optimal extraction method for extracting the genomic DNA from Clematis fasciculiflora Franch.[Method] Leavies of Clematis fasciculiflora Franch were used as materials for comparing the purity and concentration of extracted DNA and extracting time among the four extraction methods of genomic DNA including improved CTAB method Ⅰ,improved CTAB method Ⅱ,improved CTAB method Ⅲ and improved SDS method.[Result] The four extraction methods could all be successfully used for extracting the genomic DNA from Clematis fasciculiflora Franch.The purity of genomic DNA was the highest using improved CTAB method Ⅰ,with the longest extracting time;while the concentration of genomic DNA was the maximum using the improved SDS method,with the shortest extracting time and relatively low purity;the extracting time of improved CTAB method Ⅲ was the shortest.[Conclusion] This study had established the optimal extraction method for extracting the genomic DNA from Clematis fasciculiflora Franch and supported for the further research using molecular biological methods.展开更多
[Objective] The research aimed to isolate flanking sequences adjacent to the transgenic T-DNA in Brassica napus by an improved inverse PCR method.[Method] Using single clone of transgenic FS4 in Brassica napus as the ...[Objective] The research aimed to isolate flanking sequences adjacent to the transgenic T-DNA in Brassica napus by an improved inverse PCR method.[Method] Using single clone of transgenic FS4 in Brassica napus as the research materials,total DNA was extracted from transgenic Brassica napus by using modified CTAB method.After enzyme digestion and purification,self-joining was made.Two circles of nested PCR and the sequence alignment were carried out.[Result] A fragement with the size of 4.0 kb was amplified ...展开更多
[Objective] To introduce an improved method for DNA extraction from the faeces of red deer. [Method] Based on the traditional method of CTAB lysis, we proposed an improved DNA extraction method according to the charac...[Objective] To introduce an improved method for DNA extraction from the faeces of red deer. [Method] Based on the traditional method of CTAB lysis, we proposed an improved DNA extraction method according to the characteristics of red deer faeces. [Result] This improved method extracted high-quality fecal DNA from Tianshan red deer and amplified the mitochondrial cytochrome b gene. With the muscle and fur DNA of red deer as the control, the sequencing results further con- firmed the reliability of the method. [Conclusion] The method requires no proteinase K in the process of extraction, and the extracted DNA can be used for PCR ampli- fication directly without the purification of DNA purification kit, thus, it is cost-saving.展开更多
This study successfully deals with the inhomogeneous dimension problem of load separation assumption, which is the theoretical basis of the normalization method. According to the dimensionless load separation principl...This study successfully deals with the inhomogeneous dimension problem of load separation assumption, which is the theoretical basis of the normalization method. According to the dimensionless load separation principle, the normalization method has been improved by intro- ducing a forcible blunting correction. With the improved normalization method, the J-resistance curves of five different metallic materials of CT and SEB specimens are estimated. The forcible blunting correction of initial crack size plays an important role in the J-resistance curve estima- tion, which is closely related to the strain hardening level of material. The higher level of strain hardening leads to a greater difference in JQ determined by different slopes of the blunting line. If the blunting line coefficient recommended by ASTM E1820-11 is used in the improved nor- realization method, it will lead to greater fracture resistance than that processed by the blunting line coefficient recommended by ISO 12135-2002. Therefore, the influence of the blunting line on the determination of JQ must be taken into full account in the fracture toughness assessment of metallic materials.展开更多
In this paper, an improved interpolating moving least-square （IIMLS） method is presented. The shape function of the IIMLS method satisfies the property of the Kronecker 5 function. The weight function used in the II...In this paper, an improved interpolating moving least-square （IIMLS） method is presented. The shape function of the IIMLS method satisfies the property of the Kronecker 5 function. The weight function used in the IIMLS method is nonsingular. Then the IIMLS method can overcome the difficulties caused by the singularity of the weight function in the IMLS method. The number of unknown coefficients in the trial function of the IIMLS method is less than that of the moving least-square （MLS） approximation. Then by combining the IIMLS method with the Galerkin weak form of the potential problem, the improved interpolating element-free Galerkin （IIEFG） method for two-dimensional potential problems is presented. Compared with the conventional element-free Galerkin （EFG） method, the IIEFG method can directly use the essential boundary conditions. Then the IIEFG method has higher accuracy. For demonstration, three numerical examples are solved using the IIEFG method.展开更多
For natural water, method of water quality evaluation based on improved fuzzy matter-element evaluation method is presented. Two important parts are improved, the weights determining and fuzzy membership functions. Th...For natural water, method of water quality evaluation based on improved fuzzy matter-element evaluation method is presented. Two important parts are improved, the weights determining and fuzzy membership functions. The coefficient of variation of each indicator is used to determine the weight instead of traditional calculating superscales method. On the other hand, fuzzy matter-elements are constructed, and normal membership degrees are used instead of traditional trapezoidal ones. The composite fuzzy matter-elements with associated coefficient are constructed through associated transformation. The levels of natural water quality are determined according to the principle of maximum correlation. The improved fuzzy matter-element evaluation method is applied to evaluate water quality of the Luokou mainstream estuary at the first ten weeks in 2011 with the coefficient of variatiola method determining the weights. Water quality of Luokou mainstream estuary is dropping from level I to level II. The results of the improved evaluation method are basically the same as the official water quality. The variation coefficient method can reduce the workload, and overcome the adverse effects from abnormal values, compared with the traditional calculating superscales method. The results of improved fuzzy matter- element evaluation method are more credible than the ones of the traditional evaluation method. The improved evaluation method can use information of monitoring data more scientifically and comprehensively, and broaden a new evaluation method for water quality assessment.展开更多
To evaluate the water storage and project the future evolution of glaciers, the ice-thickness of glaciers is an essential input. However, direct measurements of ice thickness are labo- rious, not feasible everywhere, ...To evaluate the water storage and project the future evolution of glaciers, the ice-thickness of glaciers is an essential input. However, direct measurements of ice thickness are labo- rious, not feasible everywhere, and necessarily restricted to a small number of glaciers. In this article, we develop a simple method to estimate the ice-thickness along flow-line of mountain glaciers. Different from the traditional method based on shallow ice approximation （SIA）, which gives a relationship be- tween ice thickness, surface slope, and yield stress of glaciers, the improved method considers and pre- sents a simple way to calibrate the influence of valley wall on ice discharge. The required inputs are the glacier surface topography and outlines. This shows the potential of the method for estimating the ice-thickness distribution and volume of glaciers without using of direct thickness measurements.展开更多
The relative importance of each pollution factor in analytical hierarchy process (AHP) method comes from pooling expert opinions in general. Because expert opinions are based on information and judgment criteria, dete...The relative importance of each pollution factor in analytical hierarchy process (AHP) method comes from pooling expert opinions in general. Because expert opinions are based on information and judgment criteria, determining their weight may lead to uncertainty.. Therefore, an improved AHP method had been developed. The process of the improved AHP method involved four key procedures. The weights of pollution factors were completely related to the objective monitoring data through the standardization of these procedures. The environmental comprehensive quality of water and sediment of Xuanwu Lake, Nanjing, China had been evaluated. The environmental quality comprehensive indices (EQCI) of the water in 1991-1995 and 1996-2000 were 3.32 and 1.85, respectively, indicating that the water quality improved. The EQCI of the sediment in 1995 and 2000 indicates that the sediment contamination decreased from 1995 to 2000. Such results agreed with the fact that the lake had been under comprehensive control. However, with the classical AHP method, the EQCI of the sediment in the northwestern part of the lake may have indicated that sediment contamination increased from 1995 to 2000. The discrepancy may have resulted from the judgment difference of the experts. The improved AHP method can avoid arbitrariness of subjective judgment and can reflect the real influential factors of environment pollution in different periods or regions.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51974371 and 51804347).
文摘The reducing property of pellets prepared by ultrafine magnetite concentrate(UMC)and improving method were revealed.The results show that the reduction degree of UMC pellets is only about 56%compared with that of pellets prepared from ordinary iron ore concentrate with relatively coarse particle size,which is significantly lower than the general reduction degree of about 70%.When the composite binder composed of bentonite and organic binder was added,the reduction degree was significantly increased to 69.66%.The revealed mechanism shows that the reduced pellets with common bentonite have a concentric structure,the oxidation gap between the inner and outer layers is obvious,and the outer dense oxide layer hinders the oxidation and reduction of the inner layer.After adding the composite binder,the organic components significantly improved the internal porosity of the pellets and the aggregation degree of ultrafine iron ore concentrate particles in the granulation process,forming a porous structure.The non-uniform double-layer structure is eliminated,and the increased pores are conducive to the internal diffusion of CO,and finally the reduction degree of pellets is increased to the level equivalent to that of ordinary magnetite pellets.
文摘An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal- to-noise ratio data from all experimental data and then to use these selected data for elliptical imaging. Tile relationships among imaging accuracy, distance coefficient and residual direct wave are investigated, and then the residual direct wave is introduced to make the engineering application more convenient. The effectiveness of the proposed method is evaluated experimentally by sparse transducer array of a rectangle, and the results reveal that selecting experimental data of smaller distance coefficient can effectively improve imaging accuracy. Moreover, the direct wave difference increases with the decrease of the distance coefficient, which implies that the imaging accuracy can be effectively improved by using the experimental data of the larger direct wave difference.
基金This study was supported in part by the National Natural Science Foundation of China(No.61903146).
文摘For its outstanding aerodynamic capabilities,the integrated design of the waverider and inlet is widely accepted in hypersonic aircraft.Three aspects of the integrated design of the waverider and inlet since 2020 are mainly described in this paper.Firstly,the advantages and shortcomings of the conventional integrated design are examined.Then,different layouts of integrated design are proposed,and the aerodynamic perfor-mance optimization methods of the waverider,inlet,and their coupling are introduced.Besides,a series of methods for increasing the calculating accuracy of the waverider and inlet are presented,and the focus of attention is to consider the lateral flow problem.
基金funded by the National Natural Science Foundation of China(No.41962016)the Natural Science Foundation of NingXia(Nos.2023AAC02023,2023A1218,and 2021AAC02006).
文摘Soil improvement is one of the most important issues in geotechnical engineering practice.The wide application of traditional improvement techniques(cement/chemical materials)are limited due to damage ecological en-vironment and intensify carbon emissions.However,the use of microbially induced calcium carbonate pre-cipitation(MICP)to obtain bio-cement is a novel technique with the potential to induce soil stability,providing a low-carbon,environment-friendly,and sustainable integrated solution for some geotechnical engineering pro-blems in the environment.This paper presents a comprehensive review of the latest progress in soil improvement based on the MICP strategy.It systematically summarizes and overviews the mineralization mechanism,influ-encing factors,improved methods,engineering characteristics,and current field application status of the MICP.Additionally,it also explores the limitations and correspondingly proposes prospective applications via the MICP approach for soil improvement.This review indicates that the utilization of different environmental calcium-based wastes in MICP and combination of materials and MICP are conducive to meeting engineering and market demand.Furthermore,we recommend and encourage global collaborative study and practice with a view to commercializing MICP technique in the future.The current review purports to provide insights for engineers and interdisciplinary researchers,and guidance for future engineering applications.
文摘learning while making the teaching process more targeted and effective.Motivation,as the key factor driving individuals to take action and achieve specific goals,directly affects students’enthusiasm and creativity.Teaching strategies based on motivation can improve educational outcomes.The Self-Determination Theory provides a framework for enhancing students’intrinsic motivation,emphasizing the fulfillment of three basic psychological needs:autonomy,competence,and relatedness.Satisfying these needs allows students to demonstrate stronger learning motivation and sustained interest.Higher education instructors can support autonomy by giving students more choices,allowing them to create based on their interests,thus fostering creativity and increasing engagement.Additionally,teachers should provide competence support by setting appropriately challenging tasks,helping students gradually improve their skills and confidence,and enhancing their sense of competence.Finally,relatedness support emphasizes creating a collaborative learning environment where students can strengthen emotional connections and perceive the value of learning through group cooperation and discussions.Optimizing visual design education not only requires attention to motivation issues but also necessitates designing teaching strategies based on the Self-Determination Theory.Through support for autonomy,competence,and relatedness,educators can effectively stimulate students’intrinsic motivation,and enhance their creativity,problem-solving abilities,and interest in long-term learning.This approach makes education more meaningful and valuable,helping to cultivate more outstanding design talents.
基金supported by the Open Fund of Hubei Key Laboratory of Construction Management in Hydropower Engineering(Grant No.2016KSD04)the Open Fund of Engineering Research Center of Eco-environment in Three Gorges Reservoir Region,Ministry of Education(Grant No.KF2016-11).
文摘Sponge city(SPC)is proposed to solve the issues such as the degradation of urban water ecosystem environment,imbalanced water resource allocation,urban water logging,and water contamination.The PPP(Public Private Partnership)model is combined to release the government pressure of SPC project construction.The development of the SPC-PPP model makes significant contributions to the sustainable development and the enhancement of urban resilience against water-related disasters.However,there is no scientific performance evaluation system on its operation period has been conducted.Therefore,the SPC-PPP Evaluation model aims to objectively and reasonably assess project effectiveness,promote its development and refine the evaluation framework.This paper has set up the MEE model for performance evaluation,with improved Matter-Element Extension method to assign values to the evaluation indices.The research results show that:(1)The MEE model is more accurate in the performance evaluation and its effectiveness is reflected in its ability to capture the correlation among different indices in the same membership,rather than merely focusing on individual indices.(2)The proposed approach provided a new aspect for performance evaluation,improving the accuracy of evaluation and promoting the development of SPC-PPP project.
基金supported by the Graduate Student Scientific Research Innovation Project through Research Innovation Fund for Graduate Students in Shanxi Province(Project No.2024KY648).
文摘In this paper,we develop an advanced computational framework for the topology optimization of orthotropic materials using meshless methods.The approximation function is established based on the improved moving least squares(IMLS)method,which enhances the efficiency and stability of the numerical solution.The numerical solution formulas are derived using the improved element-free Galerkin(IEFG)method.We introduce the solid isotropic microstructures with penalization(SIMP)model to formulate a mathematical model for topology opti-mization,which effectively penalizes intermediate densities.The optimization problem is defined with the numerical solution formula and volume fraction as constraints.The objective function,which is the minimum value of flexibility,is optimized iteratively using the optimization criterion method to update the design variables efficiently and converge to an optimal solution.Sensitivity analysis is performed using the adjoint method,which provides accurate and efficient gradient information for the optimization algorithm.We validate the proposed framework through a series of numerical examples,including clamped beam,cantilever beam,and simply supported beam made of orthotropic materials.The convergence of the objective function is demonstrated by increasing the number of iterations.Additionally,the stability of the iterative process is analyzed by examining the fluctuation law of the volume fraction.By adjusting the parameters to an appropriate range,we achieve the final optimization results of the IEFG method without the checkerboard phenomenon.Comparative studies between the Element-Free Galerkin(EFG)and IEFG methods reveal that both methods yield consistent optimization results under identical parameter settings.However,the IEFG method significantly reduces computational time,highlighting its efficiency and suitability for orthotropic materials.
基金supported by the National Natural Science Foundation of China(Grant No.42377191,42072300)“The 14th Five Year Plan”Hubei Provincial advantaged characteristic disciplines(groups)project of Wuhan University of Science and Technology(Grant No.2023A0303).
文摘The stability of the tunnel portal slope is crucial for ensuring safe tunnel construction.Thus,a sound stability evaluation is of significance.Given the unique geological characteristics of tunnel portal slopes,it is necessary to establish a specific evaluation indicator system that differs from those used for ordinary slopes.Based on the unascertained measure method,uncertainties in the indicator are addressed by introducing the left and right half cloud asymmetric cloud model to optimize the linear membership function.The subjectivity of confidence criterion level identification is also improved by using the Euclidean distance method.Thus,a stability evaluation model for the tunnel portal slope is established based on the improved unascertained measure method.Finally,using the collected tunnel portal slope data,the results of four evaluation methods are compared with the safety factor levels.The evaluation methods include the traditional unascertained measure method,the method improved by using the left and right half cloud asymmetric cloud model,the method improved by using the Euclidean distance method,and the method improved by using both the left and right half cloud asymmetric cloud model and the Euclidean distance method.The results show that the accuracy rates of these four methods are 50%,55%,85%,and 90%,respectively.Among them,the joint improvement method has the slightest deviation,with only one level,while the other three methods had deviations of two levels.This result verifies the stability and effectiveness of the joint improvement method,providing a reference for tunnel portal slope stability evaluation.
基金supported by National Natural Science Foundation of China(Nos.92066108 and 51277061)。
文摘The initial shape of the secondary arc considerably influences its subsequent shape.To establish the model for the arcing time of the secondary arc and modify the single-phase reclosing sequence,theoretical and experimental analysis of the evolution process of the short-circuit arc to the secondary arc is critical.In this study,an improved charge simulation method was used to develop the internal-space electric-field model of the short-circuit arc.The intensity of the electric field was used as an independent variable to describe the initial shape of the secondary arc.A secondary arc evolution model was developed based on this model.Moreover,the accuracy of the model was evaluated by comparison with physical experimental results.When the secondary arc current increased,the arcing time and dispersion increased.There is an overall trend of increasing arc length with increasing arcing time.Nevertheless,there is a reduction in arc length during arc ignition due to short circuits between the arc columns.Furthermore,the arcing time decreased in the range of 0°-90°as the angle between the wind direction and the x-axis increased.This work investigated the method by which short-circuit arcs evolve into secondary arcs.The results can be used to develop the secondary arc evolution model and to provide both a technical and theoretical basis for secondary arc suppression.
基金Anhui Provincial Natural Science Foundation(2308085QD124)Anhui Province University Natural Science Research Project(GrantNo.2023AH050918)The University Outstanding Youth Talent Support Program of Anhui Province.
文摘This study proposes an effective method to enhance the accuracy of the Differential Quadrature Method(DQM)for calculating the dynamic characteristics of functionally graded beams by improving the form of discrete node distribution.Firstly,based on the first-order shear deformation theory,the governing equation of free vibration of a functionally graded beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam axial displacement,transverse displacement,and cross-sectional rotation angle by considering the effects of shear deformation and rotational inertia of the beam cross-section.Then,ignoring the shear deformation of the beam section and only considering the effect of the rotational inertia of the section,the governing equation of the beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam transverse displacement.Based on the differential quadrature method theory,the eigenvalue problem of ordinary differential equations is transformed into the eigenvalue problem of standard generalized algebraic equations.Finally,the first several natural frequencies of the beam can be calculated.The feasibility and accuracy of the improved DQM are verified using the finite element method(FEM)and combined with the results of relevant literature.
基金supported by the National Natural Science Foundation of China(Nos.52275442 and 51975319)。
文摘Geometric error is the main factor affecting the machining accuracy of hybrid machine tools.Kinematic calibration is an effective way to improve the geometric accuracy of hybrid machine tools.The necessity to measure both position and orientation at each pose,as well as the instability of identification in case of incomplete measurements,severely affects the application of traditional calibration methods.In this study,a kinematic calibration method with high measurement efficiency and robust identification is proposed to improve the kinematic accuracy of a five-axis hybrid machine tool.First,the configuration is introduced,and an error model is derived.Further,by investigating the mechanism error characteristics,a measurement scheme that only requires tool centre point position error measurement and one alignment operation is proposed.Subsequently,by analysing the effects of unmeasured degrees of freedom(DOFs)on other DOFs,an improved nonlinear least squares method based on virtual measurement values is proposed to achieve stable parameter identification in case of incomplete measurement,without introducing additional parameters.Finally,the proposed calibration method is verified through simulations and experiments.The proposed method can efficiently accomplish the kinematic calibration of the hybrid machine tool.The accuracy of the hybrid machine tool is significantly improved after calibration,satisfying actual aerospace machining requirements.
基金Supported by Applied Basic Research Project of Yunnan Province(2010ZC089)the948Project of National Forestry Bureau(2008-4-11)+1 种基金Sharing Platform Project of Provincial and Ministerial Key Subject,Key Laboratory and School Laboratory of Provincial Colleges and Universities in Yunnan ProvinceScience and Technology Innovation Fund of Southwest Forestry University~~
文摘[Objective] This study aimed at comparing the four extraction methods of genomic DNA from Clematis fasciculiflora Franch and determining the optimal extraction method for extracting the genomic DNA from Clematis fasciculiflora Franch.[Method] Leavies of Clematis fasciculiflora Franch were used as materials for comparing the purity and concentration of extracted DNA and extracting time among the four extraction methods of genomic DNA including improved CTAB method Ⅰ,improved CTAB method Ⅱ,improved CTAB method Ⅲ and improved SDS method.[Result] The four extraction methods could all be successfully used for extracting the genomic DNA from Clematis fasciculiflora Franch.The purity of genomic DNA was the highest using improved CTAB method Ⅰ,with the longest extracting time;while the concentration of genomic DNA was the maximum using the improved SDS method,with the shortest extracting time and relatively low purity;the extracting time of improved CTAB method Ⅲ was the shortest.[Conclusion] This study had established the optimal extraction method for extracting the genomic DNA from Clematis fasciculiflora Franch and supported for the further research using molecular biological methods.
基金Supported by National 863 Program of China(2006AA10A113)Natural Science foundation of Zhejiang Province(Y306097)~~
文摘[Objective] The research aimed to isolate flanking sequences adjacent to the transgenic T-DNA in Brassica napus by an improved inverse PCR method.[Method] Using single clone of transgenic FS4 in Brassica napus as the research materials,total DNA was extracted from transgenic Brassica napus by using modified CTAB method.After enzyme digestion and purification,self-joining was made.Two circles of nested PCR and the sequence alignment were carried out.[Result] A fragement with the size of 4.0 kb was amplified ...
基金Supported by the National Natural Science Foundation of China(31060152)the Natural Science Foundation of the Xinjiang Uygur Autonomous Region,China(2010211A02)the Key Program for Animal Sciences of Xinjiang University,China~~
文摘[Objective] To introduce an improved method for DNA extraction from the faeces of red deer. [Method] Based on the traditional method of CTAB lysis, we proposed an improved DNA extraction method according to the characteristics of red deer faeces. [Result] This improved method extracted high-quality fecal DNA from Tianshan red deer and amplified the mitochondrial cytochrome b gene. With the muscle and fur DNA of red deer as the control, the sequencing results further con- firmed the reliability of the method. [Conclusion] The method requires no proteinase K in the process of extraction, and the extracted DNA can be used for PCR ampli- fication directly without the purification of DNA purification kit, thus, it is cost-saving.
基金supported by the National Natural Science Foundation of China(Nos.11472228 and 11202174)the Sichuan Provincial Youth Science and Technology Innovation Team(No.2013TD0004)
文摘This study successfully deals with the inhomogeneous dimension problem of load separation assumption, which is the theoretical basis of the normalization method. According to the dimensionless load separation principle, the normalization method has been improved by intro- ducing a forcible blunting correction. With the improved normalization method, the J-resistance curves of five different metallic materials of CT and SEB specimens are estimated. The forcible blunting correction of initial crack size plays an important role in the J-resistance curve estima- tion, which is closely related to the strain hardening level of material. The higher level of strain hardening leads to a greater difference in JQ determined by different slopes of the blunting line. If the blunting line coefficient recommended by ASTM E1820-11 is used in the improved nor- realization method, it will lead to greater fracture resistance than that processed by the blunting line coefficient recommended by ISO 12135-2002. Therefore, the influence of the blunting line on the determination of JQ must be taken into full account in the fracture toughness assessment of metallic materials.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11171208)the Shanghai Leading Academic Discipline Project, China (Grant No. S30106)
文摘In this paper, an improved interpolating moving least-square （IIMLS） method is presented. The shape function of the IIMLS method satisfies the property of the Kronecker 5 function. The weight function used in the IIMLS method is nonsingular. Then the IIMLS method can overcome the difficulties caused by the singularity of the weight function in the IMLS method. The number of unknown coefficients in the trial function of the IIMLS method is less than that of the moving least-square （MLS） approximation. Then by combining the IIMLS method with the Galerkin weak form of the potential problem, the improved interpolating element-free Galerkin （IIEFG） method for two-dimensional potential problems is presented. Compared with the conventional element-free Galerkin （EFG） method, the IIEFG method can directly use the essential boundary conditions. Then the IIEFG method has higher accuracy. For demonstration, three numerical examples are solved using the IIEFG method.
基金supported by the National Natural Science Foundation of China (No. 41071322, 71031001)
文摘For natural water, method of water quality evaluation based on improved fuzzy matter-element evaluation method is presented. Two important parts are improved, the weights determining and fuzzy membership functions. The coefficient of variation of each indicator is used to determine the weight instead of traditional calculating superscales method. On the other hand, fuzzy matter-elements are constructed, and normal membership degrees are used instead of traditional trapezoidal ones. The composite fuzzy matter-elements with associated coefficient are constructed through associated transformation. The levels of natural water quality are determined according to the principle of maximum correlation. The improved fuzzy matter-element evaluation method is applied to evaluate water quality of the Luokou mainstream estuary at the first ten weeks in 2011 with the coefficient of variatiola method determining the weights. Water quality of Luokou mainstream estuary is dropping from level I to level II. The results of the improved evaluation method are basically the same as the official water quality. The variation coefficient method can reduce the workload, and overcome the adverse effects from abnormal values, compared with the traditional calculating superscales method. The results of improved fuzzy matter- element evaluation method are more credible than the ones of the traditional evaluation method. The improved evaluation method can use information of monitoring data more scientifically and comprehensively, and broaden a new evaluation method for water quality assessment.
基金supported by the National Basic Research Program of China (No. 2007CB411501)the Knowledge Innovation Project of the Chinese Academy of Sciences (No. KZCX2-EW-311)+1 种基金the National Natural Science Foundation of China (Nos. 91025012, J0930003/J0109)the Project for Outstanding Young Scientists of the National Natural Science Foundation of China (No. 40121101)
文摘To evaluate the water storage and project the future evolution of glaciers, the ice-thickness of glaciers is an essential input. However, direct measurements of ice thickness are labo- rious, not feasible everywhere, and necessarily restricted to a small number of glaciers. In this article, we develop a simple method to estimate the ice-thickness along flow-line of mountain glaciers. Different from the traditional method based on shallow ice approximation （SIA）, which gives a relationship be- tween ice thickness, surface slope, and yield stress of glaciers, the improved method considers and pre- sents a simple way to calibrate the influence of valley wall on ice discharge. The required inputs are the glacier surface topography and outlines. This shows the potential of the method for estimating the ice-thickness distribution and volume of glaciers without using of direct thickness measurements.
基金National Natural Science Foundation of China, No.40771186.
文摘The relative importance of each pollution factor in analytical hierarchy process (AHP) method comes from pooling expert opinions in general. Because expert opinions are based on information and judgment criteria, determining their weight may lead to uncertainty.. Therefore, an improved AHP method had been developed. The process of the improved AHP method involved four key procedures. The weights of pollution factors were completely related to the objective monitoring data through the standardization of these procedures. The environmental comprehensive quality of water and sediment of Xuanwu Lake, Nanjing, China had been evaluated. The environmental quality comprehensive indices (EQCI) of the water in 1991-1995 and 1996-2000 were 3.32 and 1.85, respectively, indicating that the water quality improved. The EQCI of the sediment in 1995 and 2000 indicates that the sediment contamination decreased from 1995 to 2000. Such results agreed with the fact that the lake had been under comprehensive control. However, with the classical AHP method, the EQCI of the sediment in the northwestern part of the lake may have indicated that sediment contamination increased from 1995 to 2000. The discrepancy may have resulted from the judgment difference of the experts. The improved AHP method can avoid arbitrariness of subjective judgment and can reflect the real influential factors of environment pollution in different periods or regions.
