We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) change...We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.展开更多
Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated wi...Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated with sodium halides(NaBr and NaI)are presented to capture elemental mercury(Hg^(0))from flue gas.The modified RM underwent comprehensive characterization,including analysis of its textural qualities,crystal structure,chemical composition,and thermal properties.The results indicate that the halide impregnation substantially impacts the surface area and pore size of the RM.Hg^(0) removal performance was evaluated on a fixed-bed reactor in simulated flue gas(consisting of N_(2),O_(2),CO_(2),NO and SO_(2),etc.)on a modified RM.At an optimal adsorption temperature of 160℃,NaI-modified sorbent(RMI5)offers a removal efficiency of 98%in a mixture of gas,including O_(2),NO and HCl.Furthermore,pseudo-second-order model fitting results demonstrate the chemisorption mechanism for the adsorption of Hg^(0) in kinetic investigations.展开更多
Tribological properties of impregnated graphite are greatly influenced by preparation technology and working conditions and it’s highly susceptible to corrosion environmental impacts,but the experimental research abo...Tribological properties of impregnated graphite are greatly influenced by preparation technology and working conditions and it’s highly susceptible to corrosion environmental impacts,but the experimental research about it are few.In this paper,three kinds of impregnated graphite samples are prepared with different degree of graphitization,the tribological properties of these samples in the dry friction environment and in a corrosive environment are analyzed and contrasted.The tribo-test results show that the friction coefficient of samples is reduced and the amount of wear of samples increase when the graphitization degree of samples increases in dry friction condition.While in a corrosive environment（samples are soaked N2O4）,the friction coefficient and amount of wear are changed little if the graphitization degree of samples are low.If the degree of graphitization increase,the friction coefficient and amount of wear of samples increase too,the amount of wear is 2 to 3 times as the samples tested in the non-corrosive environment under pv value of 30MPa？m/s.The impregnated graphite,which friction coefficient is stable and graphitization degree is in mid level,such#2,is more appropriate to have a work in the corrosion conditions.In this paper,preparation and tribological properties especially in corrosive environment of the impregnated graphite is studied,the research conclusion can provide an experimental and theoretical basis for the selection and process improvement of graphite materials,and also provide some important design parameters for contact seal works in a corrosive environment.展开更多
Kinetics of adsorption of heavy rare earth with Cyanex272-P507 impregn ated resin was studied. The influences of temperature,concentration,granularit y of resin on the exchange degree were investigated by the limited ...Kinetics of adsorption of heavy rare earth with Cyanex272-P507 impregn ated resin was studied. The influences of temperature,concentration,granularit y of resin on the exchange degree were investigated by the limited bath method. The result showed that the controlling factor of RE3+/H+ diffusion on Cyanex272-P507 extraction resin was particles diffusion. The process of diffuse kinetics f itted well with the expression developed by Body model. The apparent activation energy was determined as 23.20 kJ/mol. The reaction order was 0.452. In addition,the constant of particles diffusion(D0) was 1.352×10-8 m2/S and the entropy of diffusion was-47.055 J/(mol·K).展开更多
Instrument of IR spectrometer and methods of saturation, equimolar series change and slope were applied to study the extraction mechanism of Cyanex272-P507 impregnated resin for heavy rare earths from hydrochloric aci...Instrument of IR spectrometer and methods of saturation, equimolar series change and slope were applied to study the extraction mechanism of Cyanex272-P507 impregnated resin for heavy rare earths from hydrochloric acid solution. The results show that the molar ratio of Cyanex272-P507 to rare earth in the extraction complex is 3. Chlorine ions do not participate in coordination. The extraction reaction can be expressed as RE3＋（a） ＋ 3-HA（r） ＋ 3/2HL（r）= [REA3/2L3/2]（r） ＋ 3H＋（a） （where HA represents 2 2 Cyanex272 and HL represents P507）. The synergic extractant formed in extraction chromatography is in a form ofmonopolymer and with a chemical structure of REA3/2L3/2.展开更多
Tributyl phosphate （TBP） solvent was used for impregnation into Amberlite XAD-16 nonionic polymeric resin beads using the wet method to prepare solvent impregnated resin （SIR）. Undiluted TBP in a ratio to the resi...Tributyl phosphate （TBP） solvent was used for impregnation into Amberlite XAD-16 nonionic polymeric resin beads using the wet method to prepare solvent impregnated resin （SIR）. Undiluted TBP in a ratio to the resin support （volume to mass） of 6.0 at room temperature （RT） in 24 h was impregnated the resin with a mass ratio of 1.944, while the prepared gross sample of SIR at the ratio of solvent to resin of 3.0 was impregnated with a mass ratio of 1.88. Cerium（Ⅳ） oxide concentrate, prepared from crude Egyptian monazite sand, containing 37% cerium, 1.6% thorium and about 40% the other trivalent rare earth oxides, was used to prepare cerium（Ⅳ） nitrate solution for extraction using the prepared SIR. The impregnated resin was satisfactory for Ce（Ⅳ） extraction from nitric acid medium at room temperature. Cerium loading capacity of the impregnated resin reached 95.6% of the calculated theoretical capacity （173 g/kg （Ce/SIR）） under the conditions of 51.57 g/L cerium and 2.48 g/L thorium, 5.0 mol/L free nitric acid, solution to resin ratio of 10.0 and contacting the phases for 5.0 min. The loading capacity reached 98.75% when cerium concentration was increased to 91.43 g/L under the same conditions.展开更多
（2,3-Dimethylbutyl）（2,4,40-trimethylpentyl）phosphinic acid（INET-3） was impregnated onto dry macroporous resins XAD-16 and pretreated XAD-16 with ethyl alcohol and HCl（Pre-XAD-16） to prepare the solvent impregn...（2,3-Dimethylbutyl）（2,4,40-trimethylpentyl）phosphinic acid（INET-3） was impregnated onto dry macroporous resins XAD-16 and pretreated XAD-16 with ethyl alcohol and HCl（Pre-XAD-16） to prepare the solvent impregnated resins SIRs-INET-3/XAD-16 and SIRs-INET-3/Pre-XAD-16. The molecular weight distribution of the low molecular weight（LMW） polymers washed off by ethyl alcohol during XAD-16 pretreatment was determined by gel permeation chromatography（GPC）. The macroporous resins（XAD-16 ＆ Pre-XAD-16）, the corresponding solvent impregnated resins（SIRs-INET-3/XAD-16 ＆SIRs-INET-3/Pre-XAD-16） and the PVA coated SIRs-INET-3/Pre-XAD-16 with boric acid as cross-linking agent were characterized by FT-IR, SEM-EDS and TGA. The effects of XAD-16 pretreatment and PVA coating technology on RE（III） adsorption equilibrium time, INET-3 losses during extraction and adsorption capacity were investigated. The adsorption kinetics, selectivity and stripping behaviors of SIRs-INET-3/XAD-16 were further studied. The washed off LMW polymers had the Mn of 36,656, Mw of 40,310 and polydispersity coefficient of 1.10. The SIRs-INET-3/XAD-16 had shorter equilibrium time,less INET-3 loss and more Tm（III） adsorption capacity than the SIRs-INET-3/Pre-XAD-16. The PVA coated SIRs-INET-3/Pre-XAD-16 had less INET-3 loss and more Tm（III） adsorption capacity but longer equilibrium time than the uncoated SIRs-INET-3/Pre-XAD-16. The adsorption of RE（III） on the SIRsINET-3/XAD-16 followed the pseudo-second-order kinetic model. The Tm（III） accumulative adsorption amounts onto SIRs-INET-3/XAD-16 after eight extraction stages was 23.6 mg/g. The separation factors of adjacent heavy RE（III） β（Er/Ho）, β（Tm/Er）, β（Yb/Tm） and β（Lu/Yb） values were 1.76, 2.59, 2.56 and 1.19,respectively. The adsorbed Lu（III） onto the SIRs-INET-3/XAD-16 can be stripped completely by 1.0 mol/L H2SO4.展开更多
Hybrid materials incorporating Eu-(TTA)(3). 2H(2)O (7hereafter designated as Eu-TTA, with TTA: thenoyltrifluoroacetone) in unmodified or modified MCM-41 by 3-aminopropyl-triethoxysilane (APTES) were prepared by impreg...Hybrid materials incorporating Eu-(TTA)(3). 2H(2)O (7hereafter designated as Eu-TTA, with TTA: thenoyltrifluoroacetone) in unmodified or modified MCM-41 by 3-aminopropyl-triethoxysilane (APTES) were prepared by impregnation method. The obtained materials were characterized using X-ray diffraction (XRD), IR and diffuse reflectance spectroscopy and luminescence spectra. All the hybrid samples exhibited the characteristic emission bands of EU3+ under UV light excitation at room temperature, and the excitation spectra showed significant blue-shifts compared to the pure rare-earth complex. Although the red emission intensity in the modified hybrid was almost the half of the red emission intensity in the pure Eu-TTA complex at room temperature, the hybrid showed a much higher thermal stability due to the shielding character of the MCM-41 host.展开更多
Central venous catheters are commonly used in critically ill patients. Such catheterization may entail mechanica and infectious complications. The interest in catheterrelated infection lies in the morbidity, mortality...Central venous catheters are commonly used in critically ill patients. Such catheterization may entail mechanica and infectious complications. The interest in catheterrelated infection lies in the morbidity, mortality and costs that it involved. Numerous contributions have been made in the prevention of catheter-related infection and the current review focuses on the possible current role of antimicrobial impregnated catheters to reduce catheter-related bloodstream infections(CRBSI). There is evidence that the use of chlorhexidine-silver sulfadiazine(CHSS), rifampicin-minocycline, or rifampicin-miconazol impregnated catheters reduce the incidence of CRBSI and costs. In addition, there are some clinical circumstances associated with higher risk of CRBSI, such as the venous catheter access and the presence of tracheostomy. Current guidelines for the prevention of CRBSI recommended the use of a CHSS or rifampicin-minocycline impregnated catheter in patients whose catheter is expected to remain in place > 5 d and if the CRBSI rate has not decreased after implementation of a comprehensive strategy to reduce it.展开更多
High Pressure Laminates(HPL)panels consist of stacks of self-gluing paper sheets soaked with phenol-formaldehyde(PF)resins.An important requirement for such PFs is that they must rapidly penetrate and saturate the pap...High Pressure Laminates(HPL)panels consist of stacks of self-gluing paper sheets soaked with phenol-formaldehyde(PF)resins.An important requirement for such PFs is that they must rapidly penetrate and saturate the paper pores.Partially substituting phenol with bio-based phenolic chemicals like lignin changes the physico-chemical properties of the resin and affects its ability to penetrate the paper.In this study,PF formulations containing different proportions of lignosulfonate and kraft lignin were used to prepare paper-based laminates.The penetration of a Kraft paper sheet was characterized by a recently introduced,new device measuring the conductivity between both sides of the paper sheet after a drop of resin was placed on the surface and allowed to penetrate the sheet.The main target value measured was the time required for a specific resin to completely penetrate the defined paper sample(“penetration time”).This penetration time generally depends on the molecular weight distribution,the flow behavior and the polarity of the resin which in turn are dependent on the manufacturing conditions of the resin.In the present study,the influences of the three process factors:(1)type of lignin material used for substitution,(2)lignin modification by phenolation and(3)degree of phenol substitution on the penetration times of various lignin-phenolic hybrid impregnation resins were studied using a complete twolevel three-factorial experimental design.Thin laminates made with the resins diluted in methanol were mechanically tested in terms of tensile and flexural strains,and their cross-sections were studied by light microscopy.展开更多
As a matrix for Sc-type impregnated cathode,scandia doped tungsten with a uniform distribution of Sc2O3 was obtained by powder metallurgy combined with the liquid-solid doping method.The microstructure and composition...As a matrix for Sc-type impregnated cathode,scandia doped tungsten with a uniform distribution of Sc2O3 was obtained by powder metallurgy combined with the liquid-solid doping method.The microstructure and composition of the powder and the anti-ion bombardment behavior of scandium in the matrix were studied by means of SEM,EDS,XRD,and in-situ AES methods.Tungsten powder covered with scandium oxide,an ideal scandium oxide-doped tungsten powder for the preparation of Sc-type impregnated cathode,was obtained using the liquid-solid doping method.Compared with the matrix prepared with the mechanically mixed powder of tungsten and scandium oxide,Sc2O3-W matrix prepared with this kind of powder had smaller grain size and uniform distribution of scandium.Sc on the surface of Sc2O3 doped tungsten matrix had good high temperature stability and good anti-ion bombardment capability.展开更多
In order to improve the matrix performance of impregnated diamond drill bit to better meet the drilling needs,the effects of the addition of nano-WC and nano-NbC particles on the matrix material together with the mech...In order to improve the matrix performance of impregnated diamond drill bit to better meet the drilling needs,the effects of the addition of nano-WC and nano-NbC particles on the matrix material together with the mechanical properties and microstructure of the diamond-matrix composite material of the Fe-based diamond drill bit were studied by using the method of uniform formula design,regression analysis and solution finding.An indoor drilling test was also carried out using the fabricated impregnated diamond drill bit.The results showed that after the addition of nano-NbC and nano-WC,the hardness and flexural strength of the matrix material got improved,as the flexural strength of the diamond composite material increased to 4.29%,the wear-resistance ratio increased to 8.75%,and the tighter the chemical bonding between the diamond and the matrix.This,indicates that the addition of nanoparticles has a positive significance in improving the performance of the diamond composite.The results of the drilling test showed that the mechanical drilling speed of the impregnated diamond drill bit after nanoparticle strengthening is 25.85%higher than that of the conventional drill bit,and the matrix wear was increased by 17.5%.It proves that nanoparticles can improve the drilling performance and efficiency of drill bit.展开更多
Commercial grade weakly basic resin D301 was impregnated with iron through a simple method using ferric chloride. Experiments for single, bisolute and trinary competitive adsorption were carried out to investigate the...Commercial grade weakly basic resin D301 was impregnated with iron through a simple method using ferric chloride. Experiments for single, bisolute and trinary competitive adsorption were carried out to investigate the adsorption behavior of 2-naphthalenesulfonic acid(NSA), sulfuric acid and sulfurous acid from their solution at 298 K onto the novel hybrid iron impregnated D301(Fe-D301). Adsorption affinity of NSA on Fe-D301 was found to be much higher than that of sulfuric acid, while adsorption affinity of sulfuric acid was slightly higher than that of sulfurous acid. The data of single-solute adsorption were fitted to the Langmuir model and the Freundlich adsorption model. The non-ideal competitive adsorbed model coupled with the single-solute adsorption models were used to predict the bisolute and trinary-solute competitive adsorption equilibria. The NICM coupled with the Langmuir model yields the favorable representation of the bisolute and trinary-solute competitive adsorption behavior.展开更多
Objective:To determine the efficacy of WHO impregnated paper and CDC coated bottle based on number of storage days and number of limes of consecutive use,in the assessment of insecticide vector susceptibility tests in...Objective:To determine the efficacy of WHO impregnated paper and CDC coated bottle based on number of storage days and number of limes of consecutive use,in the assessment of insecticide vector susceptibility tests in laboratory and field conditions.Methods:Larvae and pupae of Anopheles gambiae s.l.mosquitoes were collected from the breeding sites in Seme-Kpodji and Cotonou districts in Southern Benin in April 2013 during the first rainy season.Anopheles gambiae s.l.mosquitoes were also collected from the breeding sites in Parakou district in Northern Benin in May 2013 at the beginning of the rainy season.Susceptibility tests were done using impregnated paper with bendiocarb(0.1%)following WHO protocol and stock solutions of permethrin(21.5 ug per bottle)and deltamethrin(12.5 ug per bottle)following CDC protocol on unfed female mosquitoes aged 2-5 days old.These bioassays were repeated a certain number of times.The temperature and relative humidity were monitored and recorded during the susceptibility tests.Results:This study showed that a WHO impregnated paper with bendiocarb could be used four times during four consecutive days in field conditions.Regarding a Wheaton coated bottle with permethrin or deltamethrin,they could be used at least three limes during four consecutive days in laboratory conditions.Conclusions:The day storage and the number of times that a WHO impregnated paper and a CDC coated bottle maintained their efficacy are useful in the assessment of insecticide vectors susceptibility tests.展开更多
A general mathematical model with its governing equations in dimensionless forms has beendeveloped to describe the removal of hydrogen sulfide with impregnated activated carbon.Anapproximate relationship between the s...A general mathematical model with its governing equations in dimensionless forms has beendeveloped to describe the removal of hydrogen sulfide with impregnated activated carbon.Anapproximate relationship between the sulfur capacity and the reaction time in a single carbon pellet isobtained,and criterion to ascertain the rate controlling step of the process can then be deduced.Inthe meantime,the choice of the appropriate oxygen concentration and the principle to be followedare also described.展开更多
Recently impregnated diamond bits have been widely applied in drilling hard and medium - hard formations in the world . It is quite necessary to study the fracturing mecha-nism of the impregnated diamond bit and the c...Recently impregnated diamond bits have been widely applied in drilling hard and medium - hard formations in the world . It is quite necessary to study the fracturing mecha-nism of the impregnated diamond bit and the classification of rocks , which can realize optimum drilling . Using multi - parameter rotary test stand can monitor and print nine parameters . The diamond size and concentration for experiment are various and there are nearly 200 types of samples , numbering over 1000 pieces . The results of laboratory are the same as those in the field . Besides , this paper expresses that the diamond concentration of impregnated diamond bits effect the bonding strength of diamond imbedded in ma-trix . During drilling by impregnated diamond bits three ways are used to cool the bits . The contact area between impregnated diamond layer and flow , and the drilling flow through annulus carrying away heat with conduction form can be shown by equations . It is impossible to classify the rock drillability only by using single factor . The best method is to use main factors to analyse the drillability of rocks. Only in this way , the results can be applied to practice .展开更多
Solvent impregnated resins (SIR) with di (2,4,4 trimethylpentyl)phosphinic acid (Cyanex 571) were studied by adsorption of the extractant into Amberlite XAD 4; XAD 7; XAD 1180 polymeric adsorbents. The results sh...Solvent impregnated resins (SIR) with di (2,4,4 trimethylpentyl)phosphinic acid (Cyanex 571) were studied by adsorption of the extractant into Amberlite XAD 4; XAD 7; XAD 1180 polymeric adsorbents. The results shas that Cyanex 571/XAD 7 impregnated resins containing extractant of 0 35～0 45 g·g -1 resin have a favorable extractive activity in HCl medium. The rare earths (Tb 3+ , Dy 3+ , Ho 3+ , Er 3+ ) are separated by using SIR as the column stationary phase. The better separation effect is obtained at lower load and slower elution rate.展开更多
In order to reduce the thermal energy loss of high temperature kilns and furnaces and lower the surface temperature of the kiln body,magnesia insulation materials were prepared using self-made magnesia porous aggregat...In order to reduce the thermal energy loss of high temperature kilns and furnaces and lower the surface temperature of the kiln body,magnesia insulation materials were prepared using self-made magnesia porous aggregates(using high purity magnesia powder as starting material and potassium oleate as the foaming agent),middle grade magnesia powder,calcium aluminate cement,and SiO_(2) micropowder as starting materials,introducing walnut shell powder impregnated with silica sol(short for Sws)as a pore-forming agent.The effects of the Sws addition(0,10%,15%,and 20%,by mass)and the sintering temperature(1300,1350,1400,and 1480℃)on the properties of magnesia insulation materials were studied.The results show that(1)for the specimens fired at 1480℃,when the Sws addition is 10%,the cold compressive strength is 22 MPa;when the Sws addition is 20%,the thermal conductivity is 0.368 W·m^(-1)·K^(-1)(350℃);(2)nano-silica in the silica sol reacts with MgO in the matrix to form forsterite,which encapsulates the pores volatilized from the walnut shell powder and forms closed pores.展开更多
基金Funded by Scientific and Technological Innovation Project of Carbon Emission Peak and Carbon Neutrality of Jiangsu Province(No.BE2022028-4)。
文摘We adopted the solution impregnation route with aluminum dihydrogen phosphate solution as liquid medium for effective surface modification on graphite substrate.The mass ratio of graphite to Al(H_(2)PO_(4))_(3) changed from 0.5:1 to 4:1,and the impregnation time changed from 1 to 7 h.The typical composite phase change thermal storage materials doped with the as-treated graphite were fabricated using form-stable technique.To investigate the oxidation and anti-oxidation behavior of the impregnated graphite at high temperatures,the samples were put into a muffle furnace for a cyclic heat test.Based on SEM,EDS,DSC techniques,analyses on the impregnated technique suggested an optimized processing conditions of a 3 h impregnation time with the ratio of graphite:Al(H_(2)PO_(4))_(3) as 1:3 for graphite impregnation treatment.Further investigations on high-temperature phase change heat storage materials doped by the treated graphite suggested excellent oxidation resistance and thermal cycling performance.
基金supported by the National Natural Science Foundation of China(22278066,21776039)the National Key R&D Program of China(2023YFB4103001)The Fundamental Research Funds for the Central Universities(DUT2021TB03).
文摘Mercury removal from coal combustion flue gas remains a significant challenge for environmental protection due to the lack of cost-effective sorbents.In this study,a series of red mud(RM)-based sorbents impregnated with sodium halides(NaBr and NaI)are presented to capture elemental mercury(Hg^(0))from flue gas.The modified RM underwent comprehensive characterization,including analysis of its textural qualities,crystal structure,chemical composition,and thermal properties.The results indicate that the halide impregnation substantially impacts the surface area and pore size of the RM.Hg^(0) removal performance was evaluated on a fixed-bed reactor in simulated flue gas(consisting of N_(2),O_(2),CO_(2),NO and SO_(2),etc.)on a modified RM.At an optimal adsorption temperature of 160℃,NaI-modified sorbent(RMI5)offers a removal efficiency of 98%in a mixture of gas,including O_(2),NO and HCl.Furthermore,pseudo-second-order model fitting results demonstrate the chemisorption mechanism for the adsorption of Hg^(0) in kinetic investigations.
基金Supported by National Natural Science Foundation of China(Grant No.51175408)
文摘Tribological properties of impregnated graphite are greatly influenced by preparation technology and working conditions and it’s highly susceptible to corrosion environmental impacts,but the experimental research about it are few.In this paper,three kinds of impregnated graphite samples are prepared with different degree of graphitization,the tribological properties of these samples in the dry friction environment and in a corrosive environment are analyzed and contrasted.The tribo-test results show that the friction coefficient of samples is reduced and the amount of wear of samples increase when the graphitization degree of samples increases in dry friction condition.While in a corrosive environment（samples are soaked N2O4）,the friction coefficient and amount of wear are changed little if the graphitization degree of samples are low.If the degree of graphitization increase,the friction coefficient and amount of wear of samples increase too,the amount of wear is 2 to 3 times as the samples tested in the non-corrosive environment under pv value of 30MPa？m/s.The impregnated graphite,which friction coefficient is stable and graphitization degree is in mid level,such#2,is more appropriate to have a work in the corrosion conditions.In this paper,preparation and tribological properties especially in corrosive environment of the impregnated graphite is studied,the research conclusion can provide an experimental and theoretical basis for the selection and process improvement of graphite materials,and also provide some important design parameters for contact seal works in a corrosive environment.
基金Project supported by the National Natural Science Foundation of China (5076403)Natural Science Foundation of Jiangxi Province (0450065)
文摘Kinetics of adsorption of heavy rare earth with Cyanex272-P507 impregn ated resin was studied. The influences of temperature,concentration,granularit y of resin on the exchange degree were investigated by the limited bath method. The result showed that the controlling factor of RE3+/H+ diffusion on Cyanex272-P507 extraction resin was particles diffusion. The process of diffuse kinetics f itted well with the expression developed by Body model. The apparent activation energy was determined as 23.20 kJ/mol. The reaction order was 0.452. In addition,the constant of particles diffusion(D0) was 1.352×10-8 m2/S and the entropy of diffusion was-47.055 J/(mol·K).
基金Project(50764003) supported by the National Natural Science Foundation of ChinaProject(0450065) supported by the Natural Science Foundation of JiangXi Province,China
文摘Instrument of IR spectrometer and methods of saturation, equimolar series change and slope were applied to study the extraction mechanism of Cyanex272-P507 impregnated resin for heavy rare earths from hydrochloric acid solution. The results show that the molar ratio of Cyanex272-P507 to rare earth in the extraction complex is 3. Chlorine ions do not participate in coordination. The extraction reaction can be expressed as RE3＋（a） ＋ 3-HA（r） ＋ 3/2HL（r）= [REA3/2L3/2]（r） ＋ 3H＋（a） （where HA represents 2 2 Cyanex272 and HL represents P507）. The synergic extractant formed in extraction chromatography is in a form ofmonopolymer and with a chemical structure of REA3/2L3/2.
文摘Tributyl phosphate （TBP） solvent was used for impregnation into Amberlite XAD-16 nonionic polymeric resin beads using the wet method to prepare solvent impregnated resin （SIR）. Undiluted TBP in a ratio to the resin support （volume to mass） of 6.0 at room temperature （RT） in 24 h was impregnated the resin with a mass ratio of 1.944, while the prepared gross sample of SIR at the ratio of solvent to resin of 3.0 was impregnated with a mass ratio of 1.88. Cerium（Ⅳ） oxide concentrate, prepared from crude Egyptian monazite sand, containing 37% cerium, 1.6% thorium and about 40% the other trivalent rare earth oxides, was used to prepare cerium（Ⅳ） nitrate solution for extraction using the prepared SIR. The impregnated resin was satisfactory for Ce（Ⅳ） extraction from nitric acid medium at room temperature. Cerium loading capacity of the impregnated resin reached 95.6% of the calculated theoretical capacity （173 g/kg （Ce/SIR）） under the conditions of 51.57 g/L cerium and 2.48 g/L thorium, 5.0 mol/L free nitric acid, solution to resin ratio of 10.0 and contacting the phases for 5.0 min. The loading capacity reached 98.75% when cerium concentration was increased to 91.43 g/L under the same conditions.
基金Project supported by the National Natural Science Foundation of China(21301104)the State Key Laboratory of Chemical Engineering(SKLCh E-14A04)the Fundamental Research Funds for the Central Universities(FRFTP-16-019A3)
文摘（2,3-Dimethylbutyl）（2,4,40-trimethylpentyl）phosphinic acid（INET-3） was impregnated onto dry macroporous resins XAD-16 and pretreated XAD-16 with ethyl alcohol and HCl（Pre-XAD-16） to prepare the solvent impregnated resins SIRs-INET-3/XAD-16 and SIRs-INET-3/Pre-XAD-16. The molecular weight distribution of the low molecular weight（LMW） polymers washed off by ethyl alcohol during XAD-16 pretreatment was determined by gel permeation chromatography（GPC）. The macroporous resins（XAD-16 ＆ Pre-XAD-16）, the corresponding solvent impregnated resins（SIRs-INET-3/XAD-16 ＆SIRs-INET-3/Pre-XAD-16） and the PVA coated SIRs-INET-3/Pre-XAD-16 with boric acid as cross-linking agent were characterized by FT-IR, SEM-EDS and TGA. The effects of XAD-16 pretreatment and PVA coating technology on RE（III） adsorption equilibrium time, INET-3 losses during extraction and adsorption capacity were investigated. The adsorption kinetics, selectivity and stripping behaviors of SIRs-INET-3/XAD-16 were further studied. The washed off LMW polymers had the Mn of 36,656, Mw of 40,310 and polydispersity coefficient of 1.10. The SIRs-INET-3/XAD-16 had shorter equilibrium time,less INET-3 loss and more Tm（III） adsorption capacity than the SIRs-INET-3/Pre-XAD-16. The PVA coated SIRs-INET-3/Pre-XAD-16 had less INET-3 loss and more Tm（III） adsorption capacity but longer equilibrium time than the uncoated SIRs-INET-3/Pre-XAD-16. The adsorption of RE（III） on the SIRsINET-3/XAD-16 followed the pseudo-second-order kinetic model. The Tm（III） accumulative adsorption amounts onto SIRs-INET-3/XAD-16 after eight extraction stages was 23.6 mg/g. The separation factors of adjacent heavy RE（III） β（Er/Ho）, β（Tm/Er）, β（Yb/Tm） and β（Lu/Yb） values were 1.76, 2.59, 2.56 and 1.19,respectively. The adsorbed Lu（III） onto the SIRs-INET-3/XAD-16 can be stripped completely by 1.0 mol/L H2SO4.
基金financial supportfrom PRAMX 98-05 and helpful discussion with Dr.A.C.Franville.
文摘Hybrid materials incorporating Eu-(TTA)(3). 2H(2)O (7hereafter designated as Eu-TTA, with TTA: thenoyltrifluoroacetone) in unmodified or modified MCM-41 by 3-aminopropyl-triethoxysilane (APTES) were prepared by impregnation method. The obtained materials were characterized using X-ray diffraction (XRD), IR and diffuse reflectance spectroscopy and luminescence spectra. All the hybrid samples exhibited the characteristic emission bands of EU3+ under UV light excitation at room temperature, and the excitation spectra showed significant blue-shifts compared to the pure rare-earth complex. Although the red emission intensity in the modified hybrid was almost the half of the red emission intensity in the pure Eu-TTA complex at room temperature, the hybrid showed a much higher thermal stability due to the shielding character of the MCM-41 host.
文摘Central venous catheters are commonly used in critically ill patients. Such catheterization may entail mechanica and infectious complications. The interest in catheterrelated infection lies in the morbidity, mortality and costs that it involved. Numerous contributions have been made in the prevention of catheter-related infection and the current review focuses on the possible current role of antimicrobial impregnated catheters to reduce catheter-related bloodstream infections(CRBSI). There is evidence that the use of chlorhexidine-silver sulfadiazine(CHSS), rifampicin-minocycline, or rifampicin-miconazol impregnated catheters reduce the incidence of CRBSI and costs. In addition, there are some clinical circumstances associated with higher risk of CRBSI, such as the venous catheter access and the presence of tracheostomy. Current guidelines for the prevention of CRBSI recommended the use of a CHSS or rifampicin-minocycline impregnated catheter in patients whose catheter is expected to remain in place > 5 d and if the CRBSI rate has not decreased after implementation of a comprehensive strategy to reduce it.
基金This work was carried out within the COMET program funded by the Austrian FFG,project number 844608.
文摘High Pressure Laminates(HPL)panels consist of stacks of self-gluing paper sheets soaked with phenol-formaldehyde(PF)resins.An important requirement for such PFs is that they must rapidly penetrate and saturate the paper pores.Partially substituting phenol with bio-based phenolic chemicals like lignin changes the physico-chemical properties of the resin and affects its ability to penetrate the paper.In this study,PF formulations containing different proportions of lignosulfonate and kraft lignin were used to prepare paper-based laminates.The penetration of a Kraft paper sheet was characterized by a recently introduced,new device measuring the conductivity between both sides of the paper sheet after a drop of resin was placed on the surface and allowed to penetrate the sheet.The main target value measured was the time required for a specific resin to completely penetrate the defined paper sample(“penetration time”).This penetration time generally depends on the molecular weight distribution,the flow behavior and the polarity of the resin which in turn are dependent on the manufacturing conditions of the resin.In the present study,the influences of the three process factors:(1)type of lignin material used for substitution,(2)lignin modification by phenolation and(3)degree of phenol substitution on the penetration times of various lignin-phenolic hybrid impregnation resins were studied using a complete twolevel three-factorial experimental design.Thin laminates made with the resins diluted in methanol were mechanically tested in terms of tensile and flexural strains,and their cross-sections were studied by light microscopy.
基金supported by the Program for New Century Excellent Talents in Universities,the National High Technology Research and Development Program of China(No.2006AA03Z524)the National Natural Science Foundation of China(No.50571001).
文摘As a matrix for Sc-type impregnated cathode,scandia doped tungsten with a uniform distribution of Sc2O3 was obtained by powder metallurgy combined with the liquid-solid doping method.The microstructure and composition of the powder and the anti-ion bombardment behavior of scandium in the matrix were studied by means of SEM,EDS,XRD,and in-situ AES methods.Tungsten powder covered with scandium oxide,an ideal scandium oxide-doped tungsten powder for the preparation of Sc-type impregnated cathode,was obtained using the liquid-solid doping method.Compared with the matrix prepared with the mechanically mixed powder of tungsten and scandium oxide,Sc2O3-W matrix prepared with this kind of powder had smaller grain size and uniform distribution of scandium.Sc on the surface of Sc2O3 doped tungsten matrix had good high temperature stability and good anti-ion bombardment capability.
基金National Center for International Research on Deep Earth Drilling and Resource Development,Faculty of Engineering,China University of Geosciences(Wuhan)(No.DEDRD-2022-08).
文摘In order to improve the matrix performance of impregnated diamond drill bit to better meet the drilling needs,the effects of the addition of nano-WC and nano-NbC particles on the matrix material together with the mechanical properties and microstructure of the diamond-matrix composite material of the Fe-based diamond drill bit were studied by using the method of uniform formula design,regression analysis and solution finding.An indoor drilling test was also carried out using the fabricated impregnated diamond drill bit.The results showed that after the addition of nano-NbC and nano-WC,the hardness and flexural strength of the matrix material got improved,as the flexural strength of the diamond composite material increased to 4.29%,the wear-resistance ratio increased to 8.75%,and the tighter the chemical bonding between the diamond and the matrix.This,indicates that the addition of nanoparticles has a positive significance in improving the performance of the diamond composite.The results of the drilling test showed that the mechanical drilling speed of the impregnated diamond drill bit after nanoparticle strengthening is 25.85%higher than that of the conventional drill bit,and the matrix wear was increased by 17.5%.It proves that nanoparticles can improve the drilling performance and efficiency of drill bit.
基金Supported by the National Natural Science Foundation of China(No.21276027)the Higher Educational Science and Technology Program of Shandong Province,China(No.J14LC05)
文摘Commercial grade weakly basic resin D301 was impregnated with iron through a simple method using ferric chloride. Experiments for single, bisolute and trinary competitive adsorption were carried out to investigate the adsorption behavior of 2-naphthalenesulfonic acid(NSA), sulfuric acid and sulfurous acid from their solution at 298 K onto the novel hybrid iron impregnated D301(Fe-D301). Adsorption affinity of NSA on Fe-D301 was found to be much higher than that of sulfuric acid, while adsorption affinity of sulfuric acid was slightly higher than that of sulfurous acid. The data of single-solute adsorption were fitted to the Langmuir model and the Freundlich adsorption model. The non-ideal competitive adsorbed model coupled with the single-solute adsorption models were used to predict the bisolute and trinary-solute competitive adsorption equilibria. The NICM coupled with the Langmuir model yields the favorable representation of the bisolute and trinary-solute competitive adsorption behavior.
基金Funded by the Ministere de I'Enseignement Superieur et de la Recherche Scientifique(MESRS),Benin and the President's Malaria Initiative of the U.S. Government through USAID
文摘Objective:To determine the efficacy of WHO impregnated paper and CDC coated bottle based on number of storage days and number of limes of consecutive use,in the assessment of insecticide vector susceptibility tests in laboratory and field conditions.Methods:Larvae and pupae of Anopheles gambiae s.l.mosquitoes were collected from the breeding sites in Seme-Kpodji and Cotonou districts in Southern Benin in April 2013 during the first rainy season.Anopheles gambiae s.l.mosquitoes were also collected from the breeding sites in Parakou district in Northern Benin in May 2013 at the beginning of the rainy season.Susceptibility tests were done using impregnated paper with bendiocarb(0.1%)following WHO protocol and stock solutions of permethrin(21.5 ug per bottle)and deltamethrin(12.5 ug per bottle)following CDC protocol on unfed female mosquitoes aged 2-5 days old.These bioassays were repeated a certain number of times.The temperature and relative humidity were monitored and recorded during the susceptibility tests.Results:This study showed that a WHO impregnated paper with bendiocarb could be used four times during four consecutive days in field conditions.Regarding a Wheaton coated bottle with permethrin or deltamethrin,they could be used at least three limes during four consecutive days in laboratory conditions.Conclusions:The day storage and the number of times that a WHO impregnated paper and a CDC coated bottle maintained their efficacy are useful in the assessment of insecticide vectors susceptibility tests.
文摘A general mathematical model with its governing equations in dimensionless forms has beendeveloped to describe the removal of hydrogen sulfide with impregnated activated carbon.Anapproximate relationship between the sulfur capacity and the reaction time in a single carbon pellet isobtained,and criterion to ascertain the rate controlling step of the process can then be deduced.Inthe meantime,the choice of the appropriate oxygen concentration and the principle to be followedare also described.
文摘Recently impregnated diamond bits have been widely applied in drilling hard and medium - hard formations in the world . It is quite necessary to study the fracturing mecha-nism of the impregnated diamond bit and the classification of rocks , which can realize optimum drilling . Using multi - parameter rotary test stand can monitor and print nine parameters . The diamond size and concentration for experiment are various and there are nearly 200 types of samples , numbering over 1000 pieces . The results of laboratory are the same as those in the field . Besides , this paper expresses that the diamond concentration of impregnated diamond bits effect the bonding strength of diamond imbedded in ma-trix . During drilling by impregnated diamond bits three ways are used to cool the bits . The contact area between impregnated diamond layer and flow , and the drilling flow through annulus carrying away heat with conduction form can be shown by equations . It is impossible to classify the rock drillability only by using single factor . The best method is to use main factors to analyse the drillability of rocks. Only in this way , the results can be applied to practice .
文摘Solvent impregnated resins (SIR) with di (2,4,4 trimethylpentyl)phosphinic acid (Cyanex 571) were studied by adsorption of the extractant into Amberlite XAD 4; XAD 7; XAD 1180 polymeric adsorbents. The results shas that Cyanex 571/XAD 7 impregnated resins containing extractant of 0 35～0 45 g·g -1 resin have a favorable extractive activity in HCl medium. The rare earths (Tb 3+ , Dy 3+ , Ho 3+ , Er 3+ ) are separated by using SIR as the column stationary phase. The better separation effect is obtained at lower load and slower elution rate.
文摘In order to reduce the thermal energy loss of high temperature kilns and furnaces and lower the surface temperature of the kiln body,magnesia insulation materials were prepared using self-made magnesia porous aggregates(using high purity magnesia powder as starting material and potassium oleate as the foaming agent),middle grade magnesia powder,calcium aluminate cement,and SiO_(2) micropowder as starting materials,introducing walnut shell powder impregnated with silica sol(short for Sws)as a pore-forming agent.The effects of the Sws addition(0,10%,15%,and 20%,by mass)and the sintering temperature(1300,1350,1400,and 1480℃)on the properties of magnesia insulation materials were studied.The results show that(1)for the specimens fired at 1480℃,when the Sws addition is 10%,the cold compressive strength is 22 MPa;when the Sws addition is 20%,the thermal conductivity is 0.368 W·m^(-1)·K^(-1)(350℃);(2)nano-silica in the silica sol reacts with MgO in the matrix to form forsterite,which encapsulates the pores volatilized from the walnut shell powder and forms closed pores.
