Impervious surfaces are the result of urbanization that can be explicitly quantified, managed and controlled at each stage of land development. It is a very useful environmental indicator that can be used to measure t...Impervious surfaces are the result of urbanization that can be explicitly quantified, managed and controlled at each stage of land development. It is a very useful environmental indicator that can be used to measure the impacts of urbanization on surface runoff, water quality, air quality, biodiversity and rnicroclimate. Therefore, accurate estimation of impervious surfaces is critical for urban environmental monitoring, land management, decision-making and urban planning. Many approaches have been developed to estimate surface imperviousness, using remotely sensed data with various spatial resolutions. However, few studies, have investigated the effects of spatial resolution on estimating surface imperviousness. We compare medium-resolution Landsat data with high-resolution SPOT images to quantify the imperviousness in Beijing, China. The results indicated that the overall 91% accuracy of estimates of imperviousness based on TM data was considerably higher than the 81% accuracy of the SPOT data. The higher resolution SPOT data did not always predict the imperviousness of the land better than the TM data. At the whole city level, the TM data better predicts the percentage cover of impervious surfaces. At the sub-city level, however, the ring belts from the central core to the urban-rural peripheral, the SPOT data may better predict the imperviousness. These results highlighted the need to combine multiple resolution data to quantify the percentage of imperviousness, as higher resolution data do not necessarily lead to more accurate estimates. The methodology and results in this study can be utilized to identify the most suitable remote sensing data to quickly and efficiently extract the pattern of the impervious land, which could provide the base for further study on many related urban environmental problems.展开更多
The change of impervious surface area(ISA) can effectively reveal the gradual process of urbanization and act as a key index for monitoring urban expansion. Experiencing rapid growth of the built environment in the 20...The change of impervious surface area(ISA) can effectively reveal the gradual process of urbanization and act as a key index for monitoring urban expansion. Experiencing rapid growth of the built environment in the 2000 s, urban expansion of Beijing has not been fully characterized through ISA. In this study, Landsat TM images of Beijing in 2001 and 2009 were obtained, and the eight-year urban expansion process in Beijing was analyzed using the ISA extracted by means of the vegetation-imperious surface-soil(V-I-S) model. From the spatial variation in ISA, the ring structure of urban expansion in Beijing was significant during the study period, with decreasing urban density from the city center to the periphery. In the ring road analysis, the most dramatic changes of ISA were found between the fifth ring and the sixth ring. This area has experienced the most new residential development, and is currently the main source of urban expansion. The typical profile lines revealed the directional characteristics of urban expansion. The east-west profile was the most urbanized axes in Beijing, while ISA change in the east-north profile was more significant than in the other five profiles. Moreover, the transition matrix of ISA levels revealed an increase in urban density in the low density built areas; the Moran′s I index showed a clear expansion of the central urban area, which spread contiguously; and the standard deviational ellipse indicated the northeast was the dominant direction of urban expansion. These findings can provide important spatial control guidelines in the next round of national economic and social development planning, overall urban and rural planning, and land use planning.展开更多
Impervious surface mapping is essential for urban environmental studies.Spectral Mixture Analysis(SMA)and its extensions are widely employed in impervious surface estimation from medium-resolution images.For SMA,inapp...Impervious surface mapping is essential for urban environmental studies.Spectral Mixture Analysis(SMA)and its extensions are widely employed in impervious surface estimation from medium-resolution images.For SMA,inappropriate endmember combinations and inadequate endmember classes have been recognized as the primary reasons for estimation errors.Meanwhile,the spectral-only SMA,without considering urban spatial distribution,fails to consider spectral variability in an adequate manner.The lack of endmember class diversity and their spatial variations lead to over/underestimation.To mitigate these issues,this study integrates a hierarchical strategy and spatially varied endmember spectra to map impervious surface abundance,taking Wuhan and Wuzhou as two study areas.Specifically,the piecewise convex multiple-model endmember detection algorithm is applied to automatically hierarch-ize images into three regions,and distinct endmember combinations are independently developed in each region.Then,spatially varied endmember spectra are synthesized through neighboring spectra using the distance-based weight.Comparative analysis indicates that the proposed method achieves better performance than Hierarchical SMA and Fixed Four-endmembers SMA in terms of MAE,SE,and RMSE.Further analysis suggests that the hierarch-ical strategy can expand endmember class types and considerably improve the performance for the study areas in general,specifically in less developed areas.Moreover,we find that spatially varied endmember spectra facilitate the reduction of heterogeneous surface material variations and achieve the improved performance in developed areas.展开更多
It is well known that urban impervious surface （IS） has a warming effect on urban land surface temperature （LST）. However, the influence of an IS＇s structure, components, and spatial distribution on LST has rarel...It is well known that urban impervious surface （IS） has a warming effect on urban land surface temperature （LST）. However, the influence of an IS＇s structure, components, and spatial distribution on LST has rarely been quantitatively studied within strictly urban areas. Using ETM＋ remote sensing images from the downtown area of Shanghai, China in 2010, this study characterized and quantified the influence of the IS spatial pattern on LST by selecting the percent cover of each IS cover feature and ten configuration metrics. The IS fraction was estimated by linear spectral mixture analysis （LSMA）, and LST was retrieved using a mono-window algorithm. The results indicate that high fraction IS cover features account for the majority of the study area. The high fraction IS cover features are widely distributed and concentrated in groups, which is similar with that of high temperature zones. Both the percent composition and the configuration of IS cover features greatly affect the magnitude of LST, but the percent composition is a more important factor in determining LST than the configuration of those features. The significances and effects of the given configuration variables on LST vary greatly among IS cover features.展开更多
The impervious surface area （ISA） at the regional scale is one of the important environmental factors for examining the interaction and mechanism of Land Use/Cover Change （LUCC）-ecosystem processes-climate change ...The impervious surface area （ISA） at the regional scale is one of the important environmental factors for examining the interaction and mechanism of Land Use/Cover Change （LUCC）-ecosystem processes-climate change under the interactions of urbanization and global environmental change. Timely and accurate extraction of ISA from remotely sensed data at the regional scale is challenging. This study explored the ISA extraction based on MODIS and DMSP-OLS data and the incorporation of China＇s land use/cover data. ISA datasets in Beijing-Tianjin-Tangshan Metropolitan Area （BTTMA） in 2000 and 2008 at a spatial resolution of 250 m were developed, their spatiotemporal changes were analyzed, and their impacts on water quality were then evaluated. The results indicated that ISA in BTTMA increased rapidly along urban fringe, transportation corridors and coastal belt both in intensity and extents from 2000 to 2008. Three cities （Tangshan, Langfang and Qinhuangdao） in Hebei Province had higher ISA growth rates than Beijing due to the pressure of population-resour- ces-environments in the city resulting in increasingly transferring industries to the nearby areas. The dense ISA distribution in BTTMA has serious impacts on water quality in the Haihe River watershed. Meanwhile, the proportion of ISA in sub-watersheds has significantly linear relationships with the densities of river COD and NH3-N.展开更多
This paper explores the potential to improve the impervious surface estimation accuracy using a multi-stage approach on the basis of vegetation-impervious surface-soil (V-I-S) model. In the first stage of Spectral Mix...This paper explores the potential to improve the impervious surface estimation accuracy using a multi-stage approach on the basis of vegetation-impervious surface-soil (V-I-S) model. In the first stage of Spectral Mixture Analysis (SMA) process, pixel purity index, a quantitative index for defining endmember quality, and a 3-dimensional endmember selection method were applied to refining endmembers. In the second stage, instead of obtaining impervious surface fraction by adding high and low albedo fractions directly, a linear regression model was built between impervious surface and high/low albedo using a random sampling method. The urban impervious surface distribution in the urban central area of Shanghai was predicted by the linear regression model. Estimation accuracy of spectral mixture analysis and impervious surface fraction were assessed using root mean square (RMS) and color aerial photography respectively. In comparison with three different research methods, this improved estimation method has a higher overall accuracy than traditional Linear Spectral Mixture Analysis (LSMA) method and the normalized SMA model both in root mean square error (RMSE) and standard error (SE). However, the model has a tendency to overestimate the impervious surface distribution.展开更多
Associated with the rapid economic development of China, the level of urbanization is becoming a serious concern. Harbin, the capital city of Heilongjiang Province, China and one of the political, economic, cultural, ...Associated with the rapid economic development of China, the level of urbanization is becoming a serious concern. Harbin, the capital city of Heilongjiang Province, China and one of the political, economic, cultural, and transportation centers of the northeastern region of China, has experienced rapid urbanization recently. To examine the spatial patterns of long-term urbanization and explore its driving forces, we employed the impervious surface fraction derived from remote sensing image as a primary indicator. Specifically, urban imper- vious surface information for the central city of Harbin in 1984, 1993, 2002, and 2010 was extracted from Landsat Thematic Mapper image using a Linear Spectral Mixture Analysis （LMSA）. Then, the spatial and temporal variation characteristics and the driving factors of percent impervious surface area （ISA） changes were analyzed throughout this 26-year period （1984 to 2010）. Analysis of results suggests that： （1） ISAs in the central city of Harbin con- stantly increased, particularly from 1993 to 2010, a rapid urbanization period; （2） the gravity center of impervious surface area in the central city was located in Nangang District in 1984, moving southeast from 1984 to 1993, northwest from 1993 to 2002, and continuing toward the southeast from 2002 to 2010; and （3） the urban growth of the central city can be character- ized as edge-type growth.展开更多
Impervious surface(IS) is often recognized as the indicator of urban environmental changes. Numerous research efforts have been devoted to studying its spatio-temporal dynamics and ecological effects, especially for t...Impervious surface(IS) is often recognized as the indicator of urban environmental changes. Numerous research efforts have been devoted to studying its spatio-temporal dynamics and ecological effects, especially for the IS in Beijing metropolitan region. However, most previous studies primarily considered the Beijing metropolitan region as a whole without considering the differences and heterogeneity among the function zones. In this study, the subpixel impervious surface results in Beijing within a time series(1991, 2001, 2005, 2011 and 2015) were extracted by means of the classification and regression tree(CART) model combined with change detection models. Then based on the method of standard deviation ellipse, Lorenz curve, contribution index(CI) and landscape metrics, the spatio-temporal dynamics and variations of IS(1991, 2001, 2011 and 2015) in different function zones and districts were analyzed. It is found that the total area of impervious surface in Beijing increased dramatically during the study period, increasing about 144.18%. The deflection angle of major axis of standard deviation ellipse decreased from 47.15° to 38.82°, indicating the major development axis in Beijing gradually moved from northeast-southwest to north-south. Moreover, the heterogeneity of impervious surface’s distribution among 16 districts weakened gradually, but the CI values and landscape metrics in four function zones differed greatly. The urban function extended zone(UFEZ), the main source of the growth of IS in Beijing, had the highest CI values. Its lowest CI value was 1.79 that is still much higher than the highest CI value in other function zones. The core function zone(CFZ), the traditional aggregation zone of impervious surface, had the highest contagion index(CONTAG) values, but it contributed less than UFEZ due to its small area. The CI value of the new urban developed zone(NUDZ) increased rapidly, and it increased from negative to positive and multiplied, becoming animportant contributor to the rise of urban impervious surface. However, the ecological conservation zone(ECZ) had a constant negative contribution all the time, and its CI value decreased gradually. Moreover, the landscape metrics and centroids of impervious surface in different density classes differed greatly. The high-density impervious surface had a more compact configuration and a greater impact on the eco-environment.展开更多
Under the background of China's rapid urbanization, study on comparative analysis of the spatial structure of urban agglomerations between China and the US can provide the policy proposals of space optimization fo...Under the background of China's rapid urbanization, study on comparative analysis of the spatial structure of urban agglomerations between China and the US can provide the policy proposals of space optimization for the Chinese government. Taking the Beijing-Tianjin-Hebei(BTH) and Boswash as study area, we mapped the subpixel-level impervious surface coverage of the BTH and Boswash, respectively, from 1972 to 2011. Further, landscape metrics, gravitational model and spatial analysis were used to analyze the differences of the spatial structures between the BTH and Boswash. The results showed that(1) the area of the impervious surface increased rapidly in the BTH, while those remained stable in the Boswash.(2) The spatial structure of the BTH experienced different periods including isolated cities stage, dual-core cities stage, group cities stage and network-style cities stage, while those of the Boswash was more stable, and its spatial pattern showed a "point-axis" structure.(3) The spatial pattern of high-high assembling regions of the impervious surface exhibited a "standing pancake" feature in the BTH, while those showed a "multi-center, local aggregation and global discrete" feature in the Boswash.(4) All the percentages of the impervious surface of ecological, living, and production land of the BTH were higher than those of the Boswash. At last, from the perspective of space optimization of urban agglomeration, the development proposals for the BTH were proposed.展开更多
[Objective] To study the remote sensing information extraction technology for the impervious surface of Erhai basin with the aim to develop dynamic simulation platform for the formation of water pollution. [Method] Li...[Objective] To study the remote sensing information extraction technology for the impervious surface of Erhai basin with the aim to develop dynamic simulation platform for the formation of water pollution. [Method] Linear spectral separation technology was used to achieve Vd-S model solution, extracting remote sensing in- formation of the impervious surface of Erhai basin from the TM data of Landsat5 in 2009. The linear combination of 4 kinds of endmember spectra, namely vegetation, high anti-illumination, low anti-illumination and bare soil, were used to simulate the TM spectral characteristics, and its distribution and spatial characteristics were ana- lyzed. [Result] Middle-resolution image is suitable for the basin-scaled impervious surface extraction with reliable results and satisfactory accuracy. [Conclusion] This study provided basis for deciding the relationship between the regulation strategy on the non-point source pollution of Erhai Lake, coordinated economic development and environmental protection.展开更多
The sub-pixel impervious surface percentage(SPIS) is the fraction of impervious surface area in one pixel,and it is an important indicator of urbanization.Using remote sensing data,the spatial distribution of SPIS val...The sub-pixel impervious surface percentage(SPIS) is the fraction of impervious surface area in one pixel,and it is an important indicator of urbanization.Using remote sensing data,the spatial distribution of SPIS values over large areas can be extracted,and these data are significant for studies of urban climate,environment and hydrology.To develop a stabilized,multi-temporal SPIS estimation method suitable for typical temperate semi-arid climate zones with distinct seasons,an optimal model for estimating SPIS values within Beijing Municipality was built that is based on the classification and regression tree(CART) algorithm.First,models with different input variables for SPIS estimation were built by integrating multi-source remote sensing data with other auxiliary data.The optimal model was selected through the analysis and comparison of the assessed accuracy of these models.Subsequently,multi-temporal SPIS mapping was carried out based on the optimal model.The results are as follows:1) multi-seasonal images and nighttime light(NTL) data are the optimal input variables for SPIS estimation within Beijing Municipality,where the intra-annual variability in vegetation is distinct.The different spectral characteristics in the cultivated land caused by the different farming characteristics and vegetation phenology can be detected by the multi-seasonal images effectively.NLT data can effectively reduce the misestimation caused by the spectral similarity between bare land and impervious surfaces.After testing,the SPIS modeling correlation coefficient(r) is approximately 0.86,the average error(AE) is approximately 12.8%,and the relative error(RE) is approximately 0.39.2) The SPIS results have been divided into areas with high-density impervious cover(70%–100%),medium-density impervious cover(40%–70%),low-density impervious cover(10%–40%) and natural cover(0%–10%).The SPIS model performed better in estimating values for high-density urban areas than other categories.3) Multi-temporal SPIS mapping(1991–2016) was conducted based on the optimized SPIS results for 2005.After testing,AE ranges from 12.7% to 15.2%,RE ranges from 0.39 to 0.46,and r ranges from 0.81 to 0.86.It is demonstrated that the proposed approach for estimating sub-pixel level impervious surface by integrating the CART algorithm and multi-source remote sensing data is feasible and suitable for multi-temporal SPIS mapping of areas with distinct intra-annual variability in vegetation.展开更多
In this paper, we developed a novel method of combining remote sensing tools at the sub-pixel level for accurate identification of impervious surface time series changes. We examined the use of the red-green-blue impe...In this paper, we developed a novel method of combining remote sensing tools at the sub-pixel level for accurate identification of impervious surface time series changes. We examined the use of the red-green-blue impervious surface model (RGB-IS) in detecting time series internal modification of urban regions by integrating Landsat data collected over four different periods between 1987 and 2009 (i.e., 1987, 2000, 2002, and 2009). The performance of this approach was compared with two conventional methods, namely standard RGB-normalized difference vegetation index (NDVI) and post-classification technique. In contrast to conventional techniques, RGB-IS could monitor between-class changes, within-class changes, and location of these modifications. The proposed method was independent of seasonal changes and was also able to serve as a useful alternative for quick mapping growth hotspots and updating transportation corridor map. The results also showed that Cixi County, Zhejiang Province, China experienced tremendous impervious surface changes, especially along the corridors of newly constructed highways and around urban areas over the past 22 years.展开更多
Human economic and social needs can be in conflict with ecosystem needs. Land development increases impervious surfaces causing significant negative impacts to aquatic ecosystems. Many impervious surface estimates are...Human economic and social needs can be in conflict with ecosystem needs. Land development increases impervious surfaces causing significant negative impacts to aquatic ecosystems. Many impervious surface estimates are derived from remote sensing data, developed by using different methods and often out of date. Remote sensing data is often at scales applicable to regional management, but not local planning decisions. To date, no standardized annual dataset of percent impervious surface exists for use at both local and watershed scales. Effective communication between natural resource managers and local planners has been lacking. One solution is to monitor percent impervious surface with a relative index rather than direct measure. A relative index model can use a currency, like foundation square feet per hectare, which is useful for all decision makers. One data source for developing a relative index of impervious surface is property tax data. These data document annual land development at local scale. Here, the author presents the use of Maryland property tax data to index land development and percent impervious surface.展开更多
The urban environment has continued to experience changes from increasing impervious surfaces, which alters the proper functioning of the ecological zones and impairs water quality in the watershed. Impervious cover i...The urban environment has continued to experience changes from increasing impervious surfaces, which alters the proper functioning of the ecological zones and impairs water quality in the watershed. Impervious cover is predominantly used as an indicator to assist in understanding and forecasting the impact of human actions and other related activities on aquatic resources. In this study, the rate of change in land uses using the impervious surface as an indicator, and the percentage of imperviousness on the effect on water quality in the urban watershed were assessed. Ile-Ife was delineated as an urban watershed, and the percentage of imperviousness from 2008 to 2016 and the effect of imperviousness on water bodies were assessed. The study utilized ASTERDEM, Worldview (0.46 m), IKONOS (1.4 m), Landsat (30 m) for 2008 and 2016, GPS and Drone (10 cm). Water sampling was carried out in selected locations as generated by the impervious surface analyst tool, (ISAT). The percentage (%) of impervious surfaces accounted for 59.4% (4567.1/7691.5ha) in 2008 and 70.3% (5408.2/7691.5ha) in 2016, from the total number of lands investigated. The turbidity values from low to high regions were 32.3, 55.9 and 82.4 NUT. Changes in LULC of the watershed led to increased surface temperature, impermeable surfaces, and decreased vegetation, which exposes the area to flooding and reduced water quality. This study emphasized the importance of GIS and its integration into urban changes and water quality assessment.展开更多
Urban Agglomeration(UA)is regarded as an emerging complex urban system in China.The development of UA demands a reasonable scale structure,which can be investigated by Zipf’s law.However,few studies have been conduct...Urban Agglomeration(UA)is regarded as an emerging complex urban system in China.The development of UA demands a reasonable scale structure,which can be investigated by Zipf’s law.However,few studies have been conducted to quantify the optimal scale of UA and how its development deviates from the optimal scale.With the continuous urban expansion,the problem of UAs’scale structure has received increasing attention.In this study,we propose a method based on Zipf’s law for estimating the theoretical optimal scale of UAs in China and assessing the deviation rate from their optimal scales.Twelve typical UAs in China are selected,and their development is assessed via urban impervious surface data from 2000 to 2018.The results show that the average deviation rate of the investigated UAs decreased from 3.40%in 2000 to 2.32%in 2018,demonstrating that these UAs are on a positive evolution trajectory.Furthermore,according to the development stage,we make recommendations on“large cities vs.medium/small-sized cities and promoting vs.restraining”to each UA based on its size.The conceptual and analytical knowledge,as well as the results from this study,are expected to offer valuable insights and new references for regulating and managing UAs’development in China.展开更多
In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest a...In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.展开更多
Recent research has underscored the critical need for high-level global products to support comprehensive environmental monitoring and management[1],aligning closely with the objectives of the United Nations'Susta...Recent research has underscored the critical need for high-level global products to support comprehensive environmental monitoring and management[1],aligning closely with the objectives of the United Nations'Sustainable Development Goals(SDGs),particularly SDG 11.This goal focuses on transforming cities into inclusive,safe,resilient,and sustainable spaces.Understanding the relationship between urban expansion and population growth is essential for advancing sustainable urban development.However,the SDG11.3.1 indicator,despite having a clear evaluation method(the Ratio of Land Consumption Rate to Population Growth Rate(LCRPGR)),currently faces a significant challenge because of the lack of available data[2].This data gap hinders the comprehensive and effective measurement of urban land use efficiency,impacting the sustainable management of urban expansion.Therefore,there is an urgent need to acquire precise global-scale information on urban spatial distributions to address the data shortfall for the SDG 11.3.1 indicator and to facilitate improvements in the methods for expanding and monitoring this indicator.This process will assist in comprehensively assessing and managing the economic,social,and environmental impacts of urbanization,thereby supporting the objectives involved in sustainable urban development[3].展开更多
Urban land cover has major impacts on a city＇s ecosystem services and the inherent quality of its urban residential environment. The spatio-temporal distribution of impervious surface area and green areas in Chinese ...Urban land cover has major impacts on a city＇s ecosystem services and the inherent quality of its urban residential environment. The spatio-temporal distribution of impervious surface area and green areas in Chinese cities has exhibited a significantly marked difference in comparison with USA cities. This study focused on monitoring and comparing the spatio-temporal dynamics, land cover patterns and characteristics of functional regions in six Chinese （n=3） and USA （n=3） cities. The study data were collated from Landsat TM/MSS imagery during the period 1978-2010. Results indicate that Chinese cities have developed compactly over the past three decades, while development has been notably dispersed among USA cities. Mean vegetation coverage in USA cities is approximately 2.2 times that found amongst Chinese urban agglomerations. Land use types within Chinese cities are significantly more complex, with a higher density of impervious surface area. Conversely, the central business district （CBD） and residential areas within USA cities were compdsed of a lower proportion of impervious surface area and a higher proportion of green land. Results may be used to contribute to future urban planning and administration efforts in both China and the USA.展开更多
The pollutant loads of surface runoff in an urban tourist area have been investigated for two years in the Wuhan City Zoo, China. Eight sampling sites, including two woodlands, three animal yards, two roofs and one ro...The pollutant loads of surface runoff in an urban tourist area have been investigated for two years in the Wuhan City Zoo, China. Eight sampling sites, including two woodlands, three animal yards, two roofs and one road, were selected for sampling and study. The results indicate that pollutants ranked in a predictable order of decreasing load （e.g. animal yard〉roof〉woodland〉road）, with animal yards acting as the key pollution source in the zoo. Pollutants were transported mainly by particulate form in runoff. Particulate nitrogen and particulate phosphorous accounted on average for 61%, 78% of total pollutant, respectively, over 13 monitored rainfall events. These results indicate the treatment practices should be implemented to improve particulate nutrient removal. Analysis of the M（V） curve indicate that no first flush effect existed in the surface runoff from pervious areas （e.g. woodland, animal ground yard）, whereas a first flush effect was evident in runoff from impervious surfaces （e.g. animal cement yard, roof, road）.展开更多
Development of Xiong'an New District(XND) is integral to the implementation of the Beijing-Tianjin-Hebei(BTH) Integration Initiative. It is intended to ease the non-capital functions of Beijing, optimize regional ...Development of Xiong'an New District(XND) is integral to the implementation of the Beijing-Tianjin-Hebei(BTH) Integration Initiative. It is intended to ease the non-capital functions of Beijing, optimize regional spatial patterns, and enhance ecosystem services and living environment in this urban agglomeration. Applying multi-stage remote sensing(RS) images, land use/cover change(LUCC) data, ecosystem services assessment data, and high-precision urban land-cover information, we reveal the regional land-cover characteristics of this new district as well as across the planned area of the entire BTH urban agglomeration. Corresponding ecological protection and management strategies are also proposed. Results indicated that built-up areas were rapidly expanding, leading to a continuous impervious surface at high density. Urban and impervious surface areas(ISAs) grew at rates 1.27 and 1.43 times higher than that in the 2000 s, respectively, seriously affecting about 15% area of the sub-basins. Construction of XND mainly encompasses Xiongxian, Rongcheng, and Anxin counties, areas which predominantly comprise farmland, townships and rural settlements, water, and wetland ecosystems. The development and construction of XND should ease the non-capital functions of Beijing, as well as moderately control population and industrial growth. Thus, this development should be included within the national ‘sponge city' construction pilot area in early planning stages, and reference should be made to international low-impact development modes in order to strengthen urban green infrastructural construction. Early stage planning based on the existing characteristics of the underlying surface should consider the construction of green ecological patches and ecological corridors between XND and the cities of Baoding, Beijing, and Tianjin. The proportion of impervious surfaces should not exceed 60%, while that of the core area should not exceed 70%. The development of XND needs to initiate the concept of ‘planning a city according to water resource amount' and incorporate rainwater collection and recycling.展开更多
基金supported by the National Basic Research Program (973) of China (No. 2008CB418104)the Major Programs of the Chinese Academy of Sciences (No. KZCX1-YW-14-4-1)the National Natural Science Foundation of China (No. 40901265)
文摘Impervious surfaces are the result of urbanization that can be explicitly quantified, managed and controlled at each stage of land development. It is a very useful environmental indicator that can be used to measure the impacts of urbanization on surface runoff, water quality, air quality, biodiversity and rnicroclimate. Therefore, accurate estimation of impervious surfaces is critical for urban environmental monitoring, land management, decision-making and urban planning. Many approaches have been developed to estimate surface imperviousness, using remotely sensed data with various spatial resolutions. However, few studies, have investigated the effects of spatial resolution on estimating surface imperviousness. We compare medium-resolution Landsat data with high-resolution SPOT images to quantify the imperviousness in Beijing, China. The results indicated that the overall 91% accuracy of estimates of imperviousness based on TM data was considerably higher than the 81% accuracy of the SPOT data. The higher resolution SPOT data did not always predict the imperviousness of the land better than the TM data. At the whole city level, the TM data better predicts the percentage cover of impervious surfaces. At the sub-city level, however, the ring belts from the central core to the urban-rural peripheral, the SPOT data may better predict the imperviousness. These results highlighted the need to combine multiple resolution data to quantify the percentage of imperviousness, as higher resolution data do not necessarily lead to more accurate estimates. The methodology and results in this study can be utilized to identify the most suitable remote sensing data to quickly and efficiently extract the pattern of the impervious land, which could provide the base for further study on many related urban environmental problems.
基金Under the auspices of Key Project of National Natural Science Foundation of China(No.41130534)
文摘The change of impervious surface area(ISA) can effectively reveal the gradual process of urbanization and act as a key index for monitoring urban expansion. Experiencing rapid growth of the built environment in the 2000 s, urban expansion of Beijing has not been fully characterized through ISA. In this study, Landsat TM images of Beijing in 2001 and 2009 were obtained, and the eight-year urban expansion process in Beijing was analyzed using the ISA extracted by means of the vegetation-imperious surface-soil(V-I-S) model. From the spatial variation in ISA, the ring structure of urban expansion in Beijing was significant during the study period, with decreasing urban density from the city center to the periphery. In the ring road analysis, the most dramatic changes of ISA were found between the fifth ring and the sixth ring. This area has experienced the most new residential development, and is currently the main source of urban expansion. The typical profile lines revealed the directional characteristics of urban expansion. The east-west profile was the most urbanized axes in Beijing, while ISA change in the east-north profile was more significant than in the other five profiles. Moreover, the transition matrix of ISA levels revealed an increase in urban density in the low density built areas; the Moran′s I index showed a clear expansion of the central urban area, which spread contiguously; and the standard deviational ellipse indicated the northeast was the dominant direction of urban expansion. These findings can provide important spatial control guidelines in the next round of national economic and social development planning, overall urban and rural planning, and land use planning.
基金supported by the National Natural Science Foundation of China with grant numbers[41890820,42090012,41771452 and 41771454].
文摘Impervious surface mapping is essential for urban environmental studies.Spectral Mixture Analysis(SMA)and its extensions are widely employed in impervious surface estimation from medium-resolution images.For SMA,inappropriate endmember combinations and inadequate endmember classes have been recognized as the primary reasons for estimation errors.Meanwhile,the spectral-only SMA,without considering urban spatial distribution,fails to consider spectral variability in an adequate manner.The lack of endmember class diversity and their spatial variations lead to over/underestimation.To mitigate these issues,this study integrates a hierarchical strategy and spatially varied endmember spectra to map impervious surface abundance,taking Wuhan and Wuzhou as two study areas.Specifically,the piecewise convex multiple-model endmember detection algorithm is applied to automatically hierarch-ize images into three regions,and distinct endmember combinations are independently developed in each region.Then,spatially varied endmember spectra are synthesized through neighboring spectra using the distance-based weight.Comparative analysis indicates that the proposed method achieves better performance than Hierarchical SMA and Fixed Four-endmembers SMA in terms of MAE,SE,and RMSE.Further analysis suggests that the hierarch-ical strategy can expand endmember class types and considerably improve the performance for the study areas in general,specifically in less developed areas.Moreover,we find that spatially varied endmember spectra facilitate the reduction of heterogeneous surface material variations and achieve the improved performance in developed areas.
文摘It is well known that urban impervious surface （IS） has a warming effect on urban land surface temperature （LST）. However, the influence of an IS＇s structure, components, and spatial distribution on LST has rarely been quantitatively studied within strictly urban areas. Using ETM＋ remote sensing images from the downtown area of Shanghai, China in 2010, this study characterized and quantified the influence of the IS spatial pattern on LST by selecting the percent cover of each IS cover feature and ten configuration metrics. The IS fraction was estimated by linear spectral mixture analysis （LSMA）, and LST was retrieved using a mono-window algorithm. The results indicate that high fraction IS cover features account for the majority of the study area. The high fraction IS cover features are widely distributed and concentrated in groups, which is similar with that of high temperature zones. Both the percent composition and the configuration of IS cover features greatly affect the magnitude of LST, but the percent composition is a more important factor in determining LST than the configuration of those features. The significances and effects of the given configuration variables on LST vary greatly among IS cover features.
基金The Young Scientist Fund of National Natural Science Foundation of China, No.40901224 National Basic Research Program of China, No.2010CB950900+1 种基金 Open Fund of State Key Laboratory of Remote Sensing Science, No.2009KFJJ005 Open Fund of State Key Lab of Resources and Environmental Information System, No.A0725
文摘The impervious surface area （ISA） at the regional scale is one of the important environmental factors for examining the interaction and mechanism of Land Use/Cover Change （LUCC）-ecosystem processes-climate change under the interactions of urbanization and global environmental change. Timely and accurate extraction of ISA from remotely sensed data at the regional scale is challenging. This study explored the ISA extraction based on MODIS and DMSP-OLS data and the incorporation of China＇s land use/cover data. ISA datasets in Beijing-Tianjin-Tangshan Metropolitan Area （BTTMA） in 2000 and 2008 at a spatial resolution of 250 m were developed, their spatiotemporal changes were analyzed, and their impacts on water quality were then evaluated. The results indicated that ISA in BTTMA increased rapidly along urban fringe, transportation corridors and coastal belt both in intensity and extents from 2000 to 2008. Three cities （Tangshan, Langfang and Qinhuangdao） in Hebei Province had higher ISA growth rates than Beijing due to the pressure of population-resour- ces-environments in the city resulting in increasingly transferring industries to the nearby areas. The dense ISA distribution in BTTMA has serious impacts on water quality in the Haihe River watershed. Meanwhile, the proportion of ISA in sub-watersheds has significantly linear relationships with the densities of river COD and NH3-N.
基金Under the auspices of National Natural Science Foundation of China (No. 40701177)
文摘This paper explores the potential to improve the impervious surface estimation accuracy using a multi-stage approach on the basis of vegetation-impervious surface-soil (V-I-S) model. In the first stage of Spectral Mixture Analysis (SMA) process, pixel purity index, a quantitative index for defining endmember quality, and a 3-dimensional endmember selection method were applied to refining endmembers. In the second stage, instead of obtaining impervious surface fraction by adding high and low albedo fractions directly, a linear regression model was built between impervious surface and high/low albedo using a random sampling method. The urban impervious surface distribution in the urban central area of Shanghai was predicted by the linear regression model. Estimation accuracy of spectral mixture analysis and impervious surface fraction were assessed using root mean square (RMS) and color aerial photography respectively. In comparison with three different research methods, this improved estimation method has a higher overall accuracy than traditional Linear Spectral Mixture Analysis (LSMA) method and the normalized SMA model both in root mean square error (RMSE) and standard error (SE). However, the model has a tendency to overestimate the impervious surface distribution.
基金Natural Science Foundation of Heilongjiang Province,No.QC2016050National Natural Science Foundation of China,No.41571199,No.41601382,No.41771195
文摘Associated with the rapid economic development of China, the level of urbanization is becoming a serious concern. Harbin, the capital city of Heilongjiang Province, China and one of the political, economic, cultural, and transportation centers of the northeastern region of China, has experienced rapid urbanization recently. To examine the spatial patterns of long-term urbanization and explore its driving forces, we employed the impervious surface fraction derived from remote sensing image as a primary indicator. Specifically, urban imper- vious surface information for the central city of Harbin in 1984, 1993, 2002, and 2010 was extracted from Landsat Thematic Mapper image using a Linear Spectral Mixture Analysis （LMSA）. Then, the spatial and temporal variation characteristics and the driving factors of percent impervious surface area （ISA） changes were analyzed throughout this 26-year period （1984 to 2010）. Analysis of results suggests that： （1） ISAs in the central city of Harbin con- stantly increased, particularly from 1993 to 2010, a rapid urbanization period; （2） the gravity center of impervious surface area in the central city was located in Nangang District in 1984, moving southeast from 1984 to 1993, northwest from 1993 to 2002, and continuing toward the southeast from 2002 to 2010; and （3） the urban growth of the central city can be character- ized as edge-type growth.
基金National Basic Research Program of China,No.2015CB953603National Natural Science Foundation of China,No.41671339State Key Laboratory of Earth Surface Processes and Resource Ecology,No.2017-FX-01(1)
文摘Impervious surface(IS) is often recognized as the indicator of urban environmental changes. Numerous research efforts have been devoted to studying its spatio-temporal dynamics and ecological effects, especially for the IS in Beijing metropolitan region. However, most previous studies primarily considered the Beijing metropolitan region as a whole without considering the differences and heterogeneity among the function zones. In this study, the subpixel impervious surface results in Beijing within a time series(1991, 2001, 2005, 2011 and 2015) were extracted by means of the classification and regression tree(CART) model combined with change detection models. Then based on the method of standard deviation ellipse, Lorenz curve, contribution index(CI) and landscape metrics, the spatio-temporal dynamics and variations of IS(1991, 2001, 2011 and 2015) in different function zones and districts were analyzed. It is found that the total area of impervious surface in Beijing increased dramatically during the study period, increasing about 144.18%. The deflection angle of major axis of standard deviation ellipse decreased from 47.15° to 38.82°, indicating the major development axis in Beijing gradually moved from northeast-southwest to north-south. Moreover, the heterogeneity of impervious surface’s distribution among 16 districts weakened gradually, but the CI values and landscape metrics in four function zones differed greatly. The urban function extended zone(UFEZ), the main source of the growth of IS in Beijing, had the highest CI values. Its lowest CI value was 1.79 that is still much higher than the highest CI value in other function zones. The core function zone(CFZ), the traditional aggregation zone of impervious surface, had the highest contagion index(CONTAG) values, but it contributed less than UFEZ due to its small area. The CI value of the new urban developed zone(NUDZ) increased rapidly, and it increased from negative to positive and multiplied, becoming animportant contributor to the rise of urban impervious surface. However, the ecological conservation zone(ECZ) had a constant negative contribution all the time, and its CI value decreased gradually. Moreover, the landscape metrics and centroids of impervious surface in different density classes differed greatly. The high-density impervious surface had a more compact configuration and a greater impact on the eco-environment.
基金National Natural Science Foundation of China,No.41671339
文摘Under the background of China's rapid urbanization, study on comparative analysis of the spatial structure of urban agglomerations between China and the US can provide the policy proposals of space optimization for the Chinese government. Taking the Beijing-Tianjin-Hebei(BTH) and Boswash as study area, we mapped the subpixel-level impervious surface coverage of the BTH and Boswash, respectively, from 1972 to 2011. Further, landscape metrics, gravitational model and spatial analysis were used to analyze the differences of the spatial structures between the BTH and Boswash. The results showed that(1) the area of the impervious surface increased rapidly in the BTH, while those remained stable in the Boswash.(2) The spatial structure of the BTH experienced different periods including isolated cities stage, dual-core cities stage, group cities stage and network-style cities stage, while those of the Boswash was more stable, and its spatial pattern showed a "point-axis" structure.(3) The spatial pattern of high-high assembling regions of the impervious surface exhibited a "standing pancake" feature in the BTH, while those showed a "multi-center, local aggregation and global discrete" feature in the Boswash.(4) All the percentages of the impervious surface of ecological, living, and production land of the BTH were higher than those of the Boswash. At last, from the perspective of space optimization of urban agglomeration, the development proposals for the BTH were proposed.
基金Supported by the Special Program for Pilot Study of the National Basic Research Program(973Program)(2010CB434803)~~
文摘[Objective] To study the remote sensing information extraction technology for the impervious surface of Erhai basin with the aim to develop dynamic simulation platform for the formation of water pollution. [Method] Linear spectral separation technology was used to achieve Vd-S model solution, extracting remote sensing in- formation of the impervious surface of Erhai basin from the TM data of Landsat5 in 2009. The linear combination of 4 kinds of endmember spectra, namely vegetation, high anti-illumination, low anti-illumination and bare soil, were used to simulate the TM spectral characteristics, and its distribution and spatial characteristics were ana- lyzed. [Result] Middle-resolution image is suitable for the basin-scaled impervious surface extraction with reliable results and satisfactory accuracy. [Conclusion] This study provided basis for deciding the relationship between the regulation strategy on the non-point source pollution of Erhai Lake, coordinated economic development and environmental protection.
基金Under the auspices of National Natural Science Foundation of China(No.41671339)
文摘The sub-pixel impervious surface percentage(SPIS) is the fraction of impervious surface area in one pixel,and it is an important indicator of urbanization.Using remote sensing data,the spatial distribution of SPIS values over large areas can be extracted,and these data are significant for studies of urban climate,environment and hydrology.To develop a stabilized,multi-temporal SPIS estimation method suitable for typical temperate semi-arid climate zones with distinct seasons,an optimal model for estimating SPIS values within Beijing Municipality was built that is based on the classification and regression tree(CART) algorithm.First,models with different input variables for SPIS estimation were built by integrating multi-source remote sensing data with other auxiliary data.The optimal model was selected through the analysis and comparison of the assessed accuracy of these models.Subsequently,multi-temporal SPIS mapping was carried out based on the optimal model.The results are as follows:1) multi-seasonal images and nighttime light(NTL) data are the optimal input variables for SPIS estimation within Beijing Municipality,where the intra-annual variability in vegetation is distinct.The different spectral characteristics in the cultivated land caused by the different farming characteristics and vegetation phenology can be detected by the multi-seasonal images effectively.NLT data can effectively reduce the misestimation caused by the spectral similarity between bare land and impervious surfaces.After testing,the SPIS modeling correlation coefficient(r) is approximately 0.86,the average error(AE) is approximately 12.8%,and the relative error(RE) is approximately 0.39.2) The SPIS results have been divided into areas with high-density impervious cover(70%–100%),medium-density impervious cover(40%–70%),low-density impervious cover(10%–40%) and natural cover(0%–10%).The SPIS model performed better in estimating values for high-density urban areas than other categories.3) Multi-temporal SPIS mapping(1991–2016) was conducted based on the optimized SPIS results for 2005.After testing,AE ranges from 12.7% to 15.2%,RE ranges from 0.39 to 0.46,and r ranges from 0.81 to 0.86.It is demonstrated that the proposed approach for estimating sub-pixel level impervious surface by integrating the CART algorithm and multi-source remote sensing data is feasible and suitable for multi-temporal SPIS mapping of areas with distinct intra-annual variability in vegetation.
基金Project (No. 2006BAJ05A02) supported by the National Science and Technology Pillar Program during the 11th Five-Year Plan Period of China
文摘In this paper, we developed a novel method of combining remote sensing tools at the sub-pixel level for accurate identification of impervious surface time series changes. We examined the use of the red-green-blue impervious surface model (RGB-IS) in detecting time series internal modification of urban regions by integrating Landsat data collected over four different periods between 1987 and 2009 (i.e., 1987, 2000, 2002, and 2009). The performance of this approach was compared with two conventional methods, namely standard RGB-normalized difference vegetation index (NDVI) and post-classification technique. In contrast to conventional techniques, RGB-IS could monitor between-class changes, within-class changes, and location of these modifications. The proposed method was independent of seasonal changes and was also able to serve as a useful alternative for quick mapping growth hotspots and updating transportation corridor map. The results also showed that Cixi County, Zhejiang Province, China experienced tremendous impervious surface changes, especially along the corridors of newly constructed highways and around urban areas over the past 22 years.
文摘Human economic and social needs can be in conflict with ecosystem needs. Land development increases impervious surfaces causing significant negative impacts to aquatic ecosystems. Many impervious surface estimates are derived from remote sensing data, developed by using different methods and often out of date. Remote sensing data is often at scales applicable to regional management, but not local planning decisions. To date, no standardized annual dataset of percent impervious surface exists for use at both local and watershed scales. Effective communication between natural resource managers and local planners has been lacking. One solution is to monitor percent impervious surface with a relative index rather than direct measure. A relative index model can use a currency, like foundation square feet per hectare, which is useful for all decision makers. One data source for developing a relative index of impervious surface is property tax data. These data document annual land development at local scale. Here, the author presents the use of Maryland property tax data to index land development and percent impervious surface.
文摘The urban environment has continued to experience changes from increasing impervious surfaces, which alters the proper functioning of the ecological zones and impairs water quality in the watershed. Impervious cover is predominantly used as an indicator to assist in understanding and forecasting the impact of human actions and other related activities on aquatic resources. In this study, the rate of change in land uses using the impervious surface as an indicator, and the percentage of imperviousness on the effect on water quality in the urban watershed were assessed. Ile-Ife was delineated as an urban watershed, and the percentage of imperviousness from 2008 to 2016 and the effect of imperviousness on water bodies were assessed. The study utilized ASTERDEM, Worldview (0.46 m), IKONOS (1.4 m), Landsat (30 m) for 2008 and 2016, GPS and Drone (10 cm). Water sampling was carried out in selected locations as generated by the impervious surface analyst tool, (ISAT). The percentage (%) of impervious surfaces accounted for 59.4% (4567.1/7691.5ha) in 2008 and 70.3% (5408.2/7691.5ha) in 2016, from the total number of lands investigated. The turbidity values from low to high regions were 32.3, 55.9 and 82.4 NUT. Changes in LULC of the watershed led to increased surface temperature, impermeable surfaces, and decreased vegetation, which exposes the area to flooding and reduced water quality. This study emphasized the importance of GIS and its integration into urban changes and water quality assessment.
基金supported in part by the National Natural Science Foundation of China[Grants number 42090012]03 Special Research and 5G Project of Jiangxi Province in China[Grants number 20212ABC03A09]Zhuhai Industry University Research Cooperation Project of China[Grants number ZH22017001210098PWC].
文摘Urban Agglomeration(UA)is regarded as an emerging complex urban system in China.The development of UA demands a reasonable scale structure,which can be investigated by Zipf’s law.However,few studies have been conducted to quantify the optimal scale of UA and how its development deviates from the optimal scale.With the continuous urban expansion,the problem of UAs’scale structure has received increasing attention.In this study,we propose a method based on Zipf’s law for estimating the theoretical optimal scale of UAs in China and assessing the deviation rate from their optimal scales.Twelve typical UAs in China are selected,and their development is assessed via urban impervious surface data from 2000 to 2018.The results show that the average deviation rate of the investigated UAs decreased from 3.40%in 2000 to 2.32%in 2018,demonstrating that these UAs are on a positive evolution trajectory.Furthermore,according to the development stage,we make recommendations on“large cities vs.medium/small-sized cities and promoting vs.restraining”to each UA based on its size.The conceptual and analytical knowledge,as well as the results from this study,are expected to offer valuable insights and new references for regulating and managing UAs’development in China.
文摘In recent decades, Urban Heat Island Effects have become more pronounced and more widely examined. Despite great technological advances, our current societies still experience great spatial disparity in urban forest access. Urban Heat Island Effects are measurable phenomenon that are being experienced by the world’s most urbanized areas, including increased summer high temperatures and lower evapotranspiration from having impervious surfaces instead of vegetation and trees. Tree canopy cover is our natural mitigation tool that absorbs sunlight for photosynthesis, protects humans from incoming radiation, and releases cooling moisture into the air. Unfortunately, urban areas typically have low levels of vegetation. Vulnerable urban communities are lower-income areas of inner cities with less access to heat protection like air conditioners. This study uses mean evapotranspiration levels to assess the variability of urban heat island effects across the state of Tennessee. Results show that increased developed land surface cover in Tennessee creates measurable changes in atmospheric evapotranspiration. As a result, the mean evapotranspiration levels in areas with less tree vegetation are significantly lower than the surrounding forested areas. Central areas of urban cities in Tennessee had lower mean evapotranspiration recordings than surrounding areas with less development. This work demonstrates the need for increased tree canopy coverage.
基金supported by the National Natural Science Foundation of China(42171291 and 42361144884)the Innovative Research Program of the International Research Center of Big Data for Sustainable Development Goals(CBAS2022IRP04)Joint HKU-CAS Laboratory for iEarth(313GJHZ2022074MI,E4F3050300)。
文摘Recent research has underscored the critical need for high-level global products to support comprehensive environmental monitoring and management[1],aligning closely with the objectives of the United Nations'Sustainable Development Goals(SDGs),particularly SDG 11.This goal focuses on transforming cities into inclusive,safe,resilient,and sustainable spaces.Understanding the relationship between urban expansion and population growth is essential for advancing sustainable urban development.However,the SDG11.3.1 indicator,despite having a clear evaluation method(the Ratio of Land Consumption Rate to Population Growth Rate(LCRPGR)),currently faces a significant challenge because of the lack of available data[2].This data gap hinders the comprehensive and effective measurement of urban land use efficiency,impacting the sustainable management of urban expansion.Therefore,there is an urgent need to acquire precise global-scale information on urban spatial distributions to address the data shortfall for the SDG 11.3.1 indicator and to facilitate improvements in the methods for expanding and monitoring this indicator.This process will assist in comprehensively assessing and managing the economic,social,and environmental impacts of urbanization,thereby supporting the objectives involved in sustainable urban development[3].
基金National Natural Science Foundation of China, No.41371408 National High-Tech R＆D Program of China, No.2013AA122802+2 种基金 National Basic Research Program of China, No.2010CB950900 No.2014CB954302 National Key Technology R＆D Program, No.2012BAJ15B02
文摘Urban land cover has major impacts on a city＇s ecosystem services and the inherent quality of its urban residential environment. The spatio-temporal distribution of impervious surface area and green areas in Chinese cities has exhibited a significantly marked difference in comparison with USA cities. This study focused on monitoring and comparing the spatio-temporal dynamics, land cover patterns and characteristics of functional regions in six Chinese （n=3） and USA （n=3） cities. The study data were collated from Landsat TM/MSS imagery during the period 1978-2010. Results indicate that Chinese cities have developed compactly over the past three decades, while development has been notably dispersed among USA cities. Mean vegetation coverage in USA cities is approximately 2.2 times that found amongst Chinese urban agglomerations. Land use types within Chinese cities are significantly more complex, with a higher density of impervious surface area. Conversely, the central business district （CBD） and residential areas within USA cities were compdsed of a lower proportion of impervious surface area and a higher proportion of green land. Results may be used to contribute to future urban planning and administration efforts in both China and the USA.
基金Project supported by the National Hi-Tech Research and Development Program (863) of China (No. 2002AA601022)
文摘The pollutant loads of surface runoff in an urban tourist area have been investigated for two years in the Wuhan City Zoo, China. Eight sampling sites, including two woodlands, three animal yards, two roofs and one road, were selected for sampling and study. The results indicate that pollutants ranked in a predictable order of decreasing load （e.g. animal yard〉roof〉woodland〉road）, with animal yards acting as the key pollution source in the zoo. Pollutants were transported mainly by particulate form in runoff. Particulate nitrogen and particulate phosphorous accounted on average for 61%, 78% of total pollutant, respectively, over 13 monitored rainfall events. These results indicate the treatment practices should be implemented to improve particulate nutrient removal. Analysis of the M（V） curve indicate that no first flush effect existed in the surface runoff from pervious areas （e.g. woodland, animal ground yard）, whereas a first flush effect was evident in runoff from impervious surfaces （e.g. animal cement yard, roof, road）.
基金Key Project of Beijing Natural Science Foundation,No.8171004
文摘Development of Xiong'an New District(XND) is integral to the implementation of the Beijing-Tianjin-Hebei(BTH) Integration Initiative. It is intended to ease the non-capital functions of Beijing, optimize regional spatial patterns, and enhance ecosystem services and living environment in this urban agglomeration. Applying multi-stage remote sensing(RS) images, land use/cover change(LUCC) data, ecosystem services assessment data, and high-precision urban land-cover information, we reveal the regional land-cover characteristics of this new district as well as across the planned area of the entire BTH urban agglomeration. Corresponding ecological protection and management strategies are also proposed. Results indicated that built-up areas were rapidly expanding, leading to a continuous impervious surface at high density. Urban and impervious surface areas(ISAs) grew at rates 1.27 and 1.43 times higher than that in the 2000 s, respectively, seriously affecting about 15% area of the sub-basins. Construction of XND mainly encompasses Xiongxian, Rongcheng, and Anxin counties, areas which predominantly comprise farmland, townships and rural settlements, water, and wetland ecosystems. The development and construction of XND should ease the non-capital functions of Beijing, as well as moderately control population and industrial growth. Thus, this development should be included within the national ‘sponge city' construction pilot area in early planning stages, and reference should be made to international low-impact development modes in order to strengthen urban green infrastructural construction. Early stage planning based on the existing characteristics of the underlying surface should consider the construction of green ecological patches and ecological corridors between XND and the cities of Baoding, Beijing, and Tianjin. The proportion of impervious surfaces should not exceed 60%, while that of the core area should not exceed 70%. The development of XND needs to initiate the concept of ‘planning a city according to water resource amount' and incorporate rainwater collection and recycling.
