No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the...No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the time that the end of impact force) and TF (the time that members are broken) are two key times in the failure process. Characteristics of dynamic responses at the two key times are shown in order to make the failure mechanism clear. Then three steps of energy transfer are summarized, i.e. energy applying, energy loss and energy transfer, energy consump-tion. Based on the three steps, energy transfer process for the failure reticulated dome under once impact is introduced. Energy transmissibility and local loss ratio are put forward firstly to obtain EL F(the energy left in the main reticulated dome) from the initial kinetic energy of impactor. More-over, the distribution of failure modes is decided by EL F which leads to the maximum dynamic re-sponse of the reticulated dome, but not by the initial impact kinetic energy of impactor.展开更多
In order to simultaneously measure the initiation toughness of pure mode Ⅰ and mode Ⅱ cracks in one specimen,a large-size double-cracked concave-convex plate(DCCP)specimen configuration was proposed.Impacting tests ...In order to simultaneously measure the initiation toughness of pure mode Ⅰ and mode Ⅱ cracks in one specimen,a large-size double-cracked concave-convex plate(DCCP)specimen configuration was proposed.Impacting tests were implemented in the drop plate impact device.Strain gauges were employed to measure impact loads and crack initiation time.The corresponding numerical model was established by using the dynamic finite difference program AUTODYN,and the experimental-numerical method and ABAQUS code were utilized to obtain the initial fracture toughness of the crack.Using experiments and numerical research,we concluded that the DCCP specimen is suitable for measuring the initial fracture toughness of pure mode Ⅰ and mode Ⅱ cracks at the same time;the dynamic initiation toughness increases with the increase of loading rate and the crack initiation time decreases with increasing loading rate;the initiation toughness of mode Ⅱ crack is 0.5 times that of mode Ⅰ crack when subjected to the same loading rate.For the pre-crack in the vicinity of the bottom of a sample,when its length increases from 20 to 100 mm,the dynamic initiation toughness of the pure mode Ⅰ crack gradually decreases,and the longer the lower crack length is,the easier the crack would initiate,but the dynamic initiation toughness of pure mode Ⅱ crack varies little.展开更多
This paper studied the rock dynamic fracture propagation under impact loads elaborately with a determination method proposed to calculate crack propagation dynamic stress intensity factor(DSIF).By utilizing the split-...This paper studied the rock dynamic fracture propagation under impact loads elaborately with a determination method proposed to calculate crack propagation dynamic stress intensity factor(DSIF).By utilizing the split-Hopkinson pressure bar,the impact experiments with an improved single cleavage semi-circle(ISCSC)specimen were conducted to illuminate the dynamic crack propagation behaviour.Meanwhile,the fracture characteristics and crack propagation velocity were obtained by the crack propagation gauges.Coordinating experiments with a numerical approach,the crack propagation dynamic stress intensity factors were calculated by an experimental—numerical method with fractal theory.Then,a finite difference model was developed based on the tensile fracture softening damage criterion.With the analysis of numerical and experimental results,the crack propagation behaviour and mechanism of crack arrest were discussed sophisticatedly.The results demonstrate that the novel ISCSC specimen shows a definite advantage in determining crack propagation and arrest DSIF.Additionally,the crack arrest DSIF is larger than the average propagation DSIF with a sharp increase.Meanwhile,the numerical simulation results which agree well with the actual crack propagation illustrate that the crack arrest should be dominated by the compressive stress perpendicular to the crack path,and there were several arrest pauses existing in the transitory crack arrest process.展开更多
A good mechanical model of magnetorheological damper (MRD) is essential to predict the shock isolation performance of MRD in numerical simulation. But at present, the mechanical models of MRD were all derived from the...A good mechanical model of magnetorheological damper (MRD) is essential to predict the shock isolation performance of MRD in numerical simulation. But at present, the mechanical models of MRD were all derived from the experiment subjected to harmonic vibration loads. In this paper, a commercial MRD (type RD-1005-3) manufactured by Lord Corporation was studied ex-perimentally in order to investigate its isolation performance under the impact loads. A new me-chanical model of MRD was proposed according to the data obtained by impact test. A good agreement between the numerical results and test data was observed, which showed that the model was good to simulate the dynamic properties of MRD under impact loads. It is also demon-strated that MRD can improve the acceleration and displacement response of the structure obvi-ously under impact loads.展开更多
This paper presents a non-linear simulation of the impact on a structure with different energy absorption systems using finite element models. Literature review on bistable structure, aluminum foam and expandable poly...This paper presents a non-linear simulation of the impact on a structure with different energy absorption systems using finite element models. Literature review on bistable structure, aluminum foam and expandable polystyrene is presented and taken as basis to propose energy absorption systems. Using a base structure, these systems are implemented by means of finite element modeling. A comparison of the damage caused to the structure in case of impact without implementing energy absorption system, and implementing energy absorption systems based on bistable structures, polystyrene foam and aluminum foam are shown here in. The results demonstrate the advantages of using energy absorption systems on structures under impact loads.展开更多
Progressive collapse of building structures under blast and impact loads has attracted great attention all over the world. Progressive collapse analysis is essential for an economic and safe design of building structu...Progressive collapse of building structures under blast and impact loads has attracted great attention all over the world. Progressive collapse analysis is essential for an economic and safe design of building structures against progressive collapse to blast and impact loads. Because of the catastrophic nature of progressive collapse and the potentially high cost of constructing or retrofitting buildings to resist it, it is imperative that the progressive collapse analysis methods be reliable. For engineers, their methodology to carry out progressive collapse evaluation need not only be accurate and concise, but also be easily used and works fast. Thus, many researchers have been spending lots of effort in developing reliable, efficient and straightforward progressive collapse analysis methods recently. In the present paper, current progressive collapse analysis methods available in the literature are reviewed. Their suitability, applicability and reliability are discussed. Our recent proposed new method for progressive collapse analysis of reinforced concrete frames under blast loads is also introduced.展开更多
The widely used human body injury criteria were established based on the biomechanical response of the EuroAmerican human body,without considering the differences in anthropometry and injury characteristics among diff...The widely used human body injury criteria were established based on the biomechanical response of the EuroAmerican human body,without considering the differences in anthropometry and injury characteristics among different races,particularly the Chinese human body which typically has the smaller body size.The absence of such race specific design considerations negatively influences the injury prevention capability for these populations,and weakens the applicability of injury criteria.To resolve these issues,this study aims to develop a lower leg finite element model of a 50th percentile Chinese male.The model is built based on the medical images of an average size Chinese male with detailed ankle ligaments and lower leg muscles modeled.Data from sixty experiments available in the literature are used to validate its biofidelity.Using the validated model,the lower leg model is subjected to combined axial compression and bending loads to evaluate its injury criteria.Compared with a typical Euro-American human body mode,the Chinese lower leg presents reduced mechanical tolerance,and the revised tibia index may be an appropriate injury criteria for the Chinese lower leg.Additionally,the validated model reproduces the pedestrian lower leg fracture in a domestic accident.展开更多
This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less impor...This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less importance in controlling the maximum response to impulsive loadings because the maximum response is reached in a very short time,before the damping forces can dissipate a significant portion of the energy input into the system.The development of two sine series solutions,relating to different types of impulsive loadings,one involving a single concentrated force and the other a distributed line load,are presented.This study revealed that when a simply supported Euler-Bernoulli beam,resting on a Winkler soil model,is subject to an impact load,the resulting vertical displacements,bending moments and shear forces produced along the span of the beam are considerably affected.In particular,the quantification of this effect is best observed,relative to the corresponding static solution,via an amplification factor.The computed impact amplification factors,for the sub-grade moduli used in this study,were in magnitude greater than 2,thus confirming the multiple-degree-of-freedom nature of the problem.展开更多
Dynamic wheel-rail contact forces induced by a severe form of wheel tread damage have been measured by a wheel impact load detector during full-scale field tests at different vehicle speeds.Based on laser scanning,the...Dynamic wheel-rail contact forces induced by a severe form of wheel tread damage have been measured by a wheel impact load detector during full-scale field tests at different vehicle speeds.Based on laser scanning,the measured three-dimensional damage geometry is employed in simulations of dynamic vehicle-track interaction to calibrate and verify a simulation model.The relation between the magnitude of the impact load and various operational parameters,such as vehicle speed,lateral position of wheel-rail contact,track stiffness and position of impact within a sleeper bay,is investigated.The calibrated model is later employed in simulations featuring other forms of tread damage;their effects on impact load and subsequent fatigue impact on bearings,wheel webs and subsurface initiated rolling contact fatigue of the wheel tread are assessed.The results quantify the effects of wheel tread defects and are valuable in a shift towards condition-based maintenance of running gear,and for general assessment of the severity of different types of railway wheel tread damage.展开更多
Objective： The biomechanical characters of the bone fracture of the man femoral hip joint under impact loads are explored. Methods ：A biosystem model of the man femoral hip joint by using the GE （ General Electric...Objective： The biomechanical characters of the bone fracture of the man femoral hip joint under impact loads are explored. Methods ：A biosystem model of the man femoral hip joint by using the GE （ General Electric） lightspeed multi-lay spiral CT is conducted. A 3D finite element model is established by employing the finite element software ANSYS. The FE analysis mainly concentrates on the effects of the impact directions arising from intense movements and the parenchyma on the femoral hip joint on the stress distributions of the proximal femur. Results：The parenchyma on the hip joint has relatively large relaxation effect on the impact loads. Conclusion：Effects of the angle δ of the impact load to the anterior direction and the angle γ of the impact load to the femur shaft on the bone fracture are given;δ has larger effect on the stress and strain distributions than the angle γ,which mainly represents the fracture of the upper femur including the femoral neck fracture when the posterolateral femur is impacted, consistent with the clinical resuits.展开更多
Objective： To investigate the stress distribution and fracture mechanism of proximal femur under impact loads. Methods ： The image data of one male＇ s femur were collected by the Lightspeed multi-lay spiral comput...Objective： To investigate the stress distribution and fracture mechanism of proximal femur under impact loads. Methods ： The image data of one male＇ s femur were collected by the Lightspeed multi-lay spiral computed tomography. A 3D finite element model of the femur was established by employing the finite element software ANSYS, which mainly concentrated on the effects of the directions of the impact loads arising from intense movements and the parenchyma on the hip joint as well as those of the femur material properties on the distribution of the Mises equivalent stress in the femur after impact. Results： The numerical results about the effects of the angle δ of the impact loads to the anterior direction and the angle γ of the impact loads to the femur shaft on the bone fracture were given. The angle δ had larger effect on the stress distribution than the angle γ, which mainly represented the fracture of the upper femur including the femoral neck fracture when the posterolateral femur was impacted. This result was consistent with the clinical one. The parenchyma on the hip joint has relatively large relaxation effect on the impact loads. Conclusions ： A 3D finite element analysis model of the femoral hip joint under dynamic loads is successfully established by using the impact dynamic theory.展开更多
This paper proposes a numerical three-dimensional(3D)mesoscopic approach based on the discrete element method combined with X-ray computed tomography(XCT)images to characterize the dynamic impact behavior of heterogen...This paper proposes a numerical three-dimensional(3D)mesoscopic approach based on the discrete element method combined with X-ray computed tomography(XCT)images to characterize the dynamic impact behavior of heterogeneous coal-rock(HCR).The dynamic impact loading in three directions was modelled to investigate the effects of the 3D meso-structure on the failure patterns and fracture mechanism,with different impact velocities.The XCT image-based discrete element model of HCR was calibrated through appropriate standard uniaxial compression tests.Numerical simulations were carried out to investigate how the breakage behaviors are affected by different loading directions with different impact velocities.The loading direction,input energy,and spatial distribution of the mineral phase had a remarkable influence on the failure patterns and load-carrying capacities.The shape of the gangue phase and the approximate location of the gangue interfaces are key parameters to consider when investigating the failure patterns and fracture mechanism of heterogeneous rock materials.The damage and fracture tended to propagate from the surfaces to the HCR interior.The gangue phase area contacting the loading wall,growth direction of the strong gangue interfaces,and loading directions greatly influenced the failure patterns of the heterogeneous rock materials.展开更多
This study investigated the performances of a new type of precast beam-column joint subjected to earthquake and impact loads.For sustainability and durability considerations,new materials such as corrosion-resistant f...This study investigated the performances of a new type of precast beam-column joint subjected to earthquake and impact loads.For sustainability and durability considerations,new materials such as corrosion-resistant fibre reinforced polymer(FRP)bolts and reinforcements,fibre reinforced concrete(FRC),and geopolymer concrete(GPC)were used to construct the joint.To examine the resilience,durability,sustainability,and multi-hazard resistance capacities,both cyclic and pendulum impact tests were carried out.The experimental results demonstrated that the proposed precast joints had the comparable or even better performances as compared with the traditional monolithic joints under cyclic and impact loads.Numerical simulations using ABAQUS were also adopted to determine the optimal values of the concrete-end-plate(CEP)thickness for the proposed dry joints and to further quantify other response parameters which could not be obtained during the test,e.g.,stress distribution,energy absorption,and stress contours.Discussion on the influences of various parameters on joint performances under different loading conditions was also presented in this study.展开更多
Vehicle load is among the main factors affecting the deformation of subgrade soil.In this research study,the concept of impact type traffic load is introduced to investigate the effects of vehicle load based on the dy...Vehicle load is among the main factors affecting the deformation of subgrade soil.In this research study,the concept of impact type traffic load is introduced to investigate the effects of vehicle load based on the dynamic stress and displacement time histories acquired from seasonal frozen subgrade soils.Using freezing-thawing and dynamic triaxial tests and considering the amplitude and loading sequence of impact type traffic load,the residual deformation characteristics of subgrade soil under impact type traffic loads and freezing-thawing cycles is studied.It was found that under impact type traffic load,the residual deformation of soils increased sharply as the amplitude of impact type traffic load increased.It was also found that the increase in the amplitude of impact type traffic load led to the increase of residual deformation in a scale of power and exponential function.The amplitudes of impact type traffic load affect the development stress-strain path of the residual strain.After the soil experienced the proper amount of pre-vibration of the light load,residual deformation decreased by 15%.After freezing-thawing,the residual strain of soil increased as the amplitude of the impact type traffic loads increased.Also,when the amplification effect of freezing-thawing on the residual strain was basically stable,the residual deformation increased by about 10%.The peak impact type traffic load had a large effect on soil deformation after the freezing-thawing process,leading to the observation that of the earlier the peaks,the stronger the effect of freezing-thawing.After the soil was subjected to preloading with a small load,the influence of the freezing-thawing cycles gradually stabilized.The results may be useful in preventing and controlling the risk of subgrade soil failure when construction takes place spring thaw periods.展开更多
In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and compreh...In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.展开更多
Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched ...Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched marine equipment in low-temperature ice-prone waters.A computational fluid dynamics-finite element method(CFD-FEM) coupled framework was established to simulate bidirectional fluid-structure interactions during the water-exit process of a ventilated vehicle impacting ice in brash environments.Distinct evolution characteristics were revealed by comparatively analyzing the cavity,flow fields,hydrodynamic loading,structural deformation,and trajectory stability across three scenarios:ice-free,single-ice,and multi-ice.Furthermore,the position-dependent impact effects were characterized.The findings reveal that the impact,friction,and compression effects of ice induce bending and wrinkling of the shoulder cavity,aggravating its collapse and increasing the wetting of the vehicle,resulting in a substantial expansion of the high-velocity and vortex-dominated regions within the flow field,accompanied by more obvious water splashes.The impact of ice notably increases the kinetic energy dissipation of the vehicle during the cross-water stage and diminishes its motion stability.In the center-symmetric layout,the vehicle collides with ice only once,with high stress confined to the head.Conversely,the radial-offset layout causes secondary or even multiple collisions,resulting in high-stress areas on the shoulder of the vehicle,making it deflect and ultimately causing the tail cavity to tilt and become destabilized.The design of new vehicles suitable for ice-prone environments should focus on enhancing the impact toughness of the head structure and optimizing the surface shape design to improve the adaptability to low-temperature complex environments.展开更多
In this study,a coupled loading method combining three-dimensional static loading with graded cyclic impacts was developed to simulate the stress environment of the surrounding rock under impact ground pressure caused...In this study,a coupled loading method combining three-dimensional static loading with graded cyclic impacts was developed to simulate the stress environment of the surrounding rock under impact ground pressure caused by cyclic disturbances.The mechanical behavior and energy dissipation of coal under this loading method were studied using a split Hopkinson pressure bar(SHPB).The results showed that the pre-applied cyclic low-pressure impacts deteriorated the coal sample's resistance to external loads.Under both cyclic low-pressure impacts and single high-pressure impacts,the dynamic peak stress and secant modulus decreased with increasing impact cycles,exhibiting dynamic fatigue characteristics.The dynamic secant modulus of the sample decreased by 4.14%-6.67%after each impact.The dissipated energy for coal fragmentation samples increased with the number of impacts,averaging 28%under cyclic low-pressure impacts and 29%under single high-pressure impacts.The efficiency of dissipated energy for coal fragmentation initially increased and then decreased as the wave impedance ratio between the coal sample and the bar increased,reaching a maximum of 43.3%when the ratio was 0.06.Based on the defined damage variable,the damage to coal samples from high-pressure impacts was found to be 12 times greater than that under low-pressure conditions.The degree of coal fragmentation was positively correlated with the maximum damage increment.With increasing maximum damage increment,the failure mode of the coal sample evolved from tensile failure to tensile-compressive-shear composite failure.展开更多
Rock collapse is a significant geological disaster that poses a serious threat to life and property in mountainous regions worldwide. Investigating the response of protective structures to rockfall impacts can provide...Rock collapse is a significant geological disaster that poses a serious threat to life and property in mountainous regions worldwide. Investigating the response of protective structures to rockfall impacts can provide valuable references for the design and placement of such structures. In this study, RocPro3D and ABAQUS were employed to comprehensively analyze rockfall movement trajectories and the structural response upon impact. The results indicate that when the impact velocity of rockfall at the protective structure reaches 20–30 m/sec, the corresponding bounce height ranges from 5 to 8 m, and most rockfall accumulates at the slope toe. The interface form of the structure significantly influences various impact response indicators, including impact force, penetration depth, contact area, concrete strain, and displacement of the slab’s lower surface. Furthermore, slabs equipped with a buffer layer experience substantially less damage compared to those without one.展开更多
Sea ice exhibits complex mechanical properties,and no unified constitutive model currently exists.This study establishes an elastoplastic sea ice constitutive model based on non-ordinary state-based Peridynamics(PD)an...Sea ice exhibits complex mechanical properties,and no unified constitutive model currently exists.This study establishes an elastoplastic sea ice constitutive model based on non-ordinary state-based Peridynamics(PD)and the TsaiWu yield criterion,applying force state calculations to sea ice collisions while mitigating zero energy modes.A Fortran program implements the elastic-plastic constitutive equation of PD to simulate spherical ice-steel plate collisions.The program's accuracy in simulating sea ice collisions is validated through comparison with finite element results.Using the established model,this study simulates collisions between vertical structures and layer ice,analyzing the effects of impact velocity,vertical structure size,and critical elongation on sea ice load.The findings demonstrate positive correlations between collision force and impact velocity,vertical structure size,and critical elongation.At high velocities,impact significantly affects collision force,primarily following a quadratic function,while vertical structure effects exhibit a linear relationship.展开更多
In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-ele...In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-electric surface layers(referred to as"FG-TPMS-MEE curved-doubly shells")subjected to low-velocity impact loads.This study presents low-velocity impact load model based on a single springmass(S-M)approach.The FG-TPMS-MEE curved-doubly shells are covered with two magneto-electric surface layers,while the core layer consists of three types:I-graph and Wrapped Package-graph(IWP),Gyroid(G),and Primitive(P),with various graded functions.These types are notable for their exceptional stiffness-to-weight ratios,enabling a wide range of potential applications.The Maxwell equations and electromagnetic boundary conditions are applied to compute the change in electric potentials and magnetic potentials.The equilibrium equations of the shell are derived from a refined higher-order shear deformation theory(HSDT),and the transient responses of the FG-TPMS-MEE curveddoubly shells are subsequently determined using Newmark's direct integration method.These results have applications in structural vibration control and the analysis of structures subjected to impact or explosive loads.Furthermore,this study provides a theoretical prediction of the low-velocity impact load and magneto-electric-elastic effects on the free vibration and transient response of FG-TPMS-MEE curved-doubly shells.展开更多
基金Supported by National Natural Science Foundation of China(No.90715034)
文摘No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the time that the end of impact force) and TF (the time that members are broken) are two key times in the failure process. Characteristics of dynamic responses at the two key times are shown in order to make the failure mechanism clear. Then three steps of energy transfer are summarized, i.e. energy applying, energy loss and energy transfer, energy consump-tion. Based on the three steps, energy transfer process for the failure reticulated dome under once impact is introduced. Energy transmissibility and local loss ratio are put forward firstly to obtain EL F(the energy left in the main reticulated dome) from the initial kinetic energy of impactor. More-over, the distribution of failure modes is decided by EL F which leads to the maximum dynamic re-sponse of the reticulated dome, but not by the initial impact kinetic energy of impactor.
基金Projects(U19A2098,1210021843)supported by the National Natural Science Foundation of ChinaProject(2021SCU12130)supported by Fundamental Research Funds for the Central Universities,China+1 种基金Project(2021YJ0511)supported by the Sichuan Science and Technology Program,ChinaProjects(DESEYU202205,DESE202005)supported by the Open Fund of Key Laboratory of Deep Earth Science and Engineering,China。
文摘In order to simultaneously measure the initiation toughness of pure mode Ⅰ and mode Ⅱ cracks in one specimen,a large-size double-cracked concave-convex plate(DCCP)specimen configuration was proposed.Impacting tests were implemented in the drop plate impact device.Strain gauges were employed to measure impact loads and crack initiation time.The corresponding numerical model was established by using the dynamic finite difference program AUTODYN,and the experimental-numerical method and ABAQUS code were utilized to obtain the initial fracture toughness of the crack.Using experiments and numerical research,we concluded that the DCCP specimen is suitable for measuring the initial fracture toughness of pure mode Ⅰ and mode Ⅱ cracks at the same time;the dynamic initiation toughness increases with the increase of loading rate and the crack initiation time decreases with increasing loading rate;the initiation toughness of mode Ⅱ crack is 0.5 times that of mode Ⅰ crack when subjected to the same loading rate.For the pre-crack in the vicinity of the bottom of a sample,when its length increases from 20 to 100 mm,the dynamic initiation toughness of the pure mode Ⅰ crack gradually decreases,and the longer the lower crack length is,the easier the crack would initiate,but the dynamic initiation toughness of pure mode Ⅱ crack varies little.
基金the National Natural Science Foundation of China(Grant Nurmbers 11702181,11672194)the Sichuan Science and Technology Program(Grant Numbers 2019YFG0047).
文摘This paper studied the rock dynamic fracture propagation under impact loads elaborately with a determination method proposed to calculate crack propagation dynamic stress intensity factor(DSIF).By utilizing the split-Hopkinson pressure bar,the impact experiments with an improved single cleavage semi-circle(ISCSC)specimen were conducted to illuminate the dynamic crack propagation behaviour.Meanwhile,the fracture characteristics and crack propagation velocity were obtained by the crack propagation gauges.Coordinating experiments with a numerical approach,the crack propagation dynamic stress intensity factors were calculated by an experimental—numerical method with fractal theory.Then,a finite difference model was developed based on the tensile fracture softening damage criterion.With the analysis of numerical and experimental results,the crack propagation behaviour and mechanism of crack arrest were discussed sophisticatedly.The results demonstrate that the novel ISCSC specimen shows a definite advantage in determining crack propagation and arrest DSIF.Additionally,the crack arrest DSIF is larger than the average propagation DSIF with a sharp increase.Meanwhile,the numerical simulation results which agree well with the actual crack propagation illustrate that the crack arrest should be dominated by the compressive stress perpendicular to the crack path,and there were several arrest pauses existing in the transitory crack arrest process.
基金Supported by National Natural Science Foundation of China (No.50638030,50525825)the National Science and Technology SupportProgram (No.2006BAJ13B02)
文摘A good mechanical model of magnetorheological damper (MRD) is essential to predict the shock isolation performance of MRD in numerical simulation. But at present, the mechanical models of MRD were all derived from the experiment subjected to harmonic vibration loads. In this paper, a commercial MRD (type RD-1005-3) manufactured by Lord Corporation was studied ex-perimentally in order to investigate its isolation performance under the impact loads. A new me-chanical model of MRD was proposed according to the data obtained by impact test. A good agreement between the numerical results and test data was observed, which showed that the model was good to simulate the dynamic properties of MRD under impact loads. It is also demon-strated that MRD can improve the acceleration and displacement response of the structure obvi-ously under impact loads.
文摘This paper presents a non-linear simulation of the impact on a structure with different energy absorption systems using finite element models. Literature review on bistable structure, aluminum foam and expandable polystyrene is presented and taken as basis to propose energy absorption systems. Using a base structure, these systems are implemented by means of finite element modeling. A comparison of the damage caused to the structure in case of impact without implementing energy absorption system, and implementing energy absorption systems based on bistable structures, polystyrene foam and aluminum foam are shown here in. The results demonstrate the advantages of using energy absorption systems on structures under impact loads.
基金Supported by National Natural Science Foundation of China(No.50638030and No.50528808)National Key Technologies R&D Program of China(No.2006BAJ13B02)
文摘Progressive collapse of building structures under blast and impact loads has attracted great attention all over the world. Progressive collapse analysis is essential for an economic and safe design of building structures against progressive collapse to blast and impact loads. Because of the catastrophic nature of progressive collapse and the potentially high cost of constructing or retrofitting buildings to resist it, it is imperative that the progressive collapse analysis methods be reliable. For engineers, their methodology to carry out progressive collapse evaluation need not only be accurate and concise, but also be easily used and works fast. Thus, many researchers have been spending lots of effort in developing reliable, efficient and straightforward progressive collapse analysis methods recently. In the present paper, current progressive collapse analysis methods available in the literature are reviewed. Their suitability, applicability and reliability are discussed. Our recent proposed new method for progressive collapse analysis of reinforced concrete frames under blast loads is also introduced.
文摘The widely used human body injury criteria were established based on the biomechanical response of the EuroAmerican human body,without considering the differences in anthropometry and injury characteristics among different races,particularly the Chinese human body which typically has the smaller body size.The absence of such race specific design considerations negatively influences the injury prevention capability for these populations,and weakens the applicability of injury criteria.To resolve these issues,this study aims to develop a lower leg finite element model of a 50th percentile Chinese male.The model is built based on the medical images of an average size Chinese male with detailed ankle ligaments and lower leg muscles modeled.Data from sixty experiments available in the literature are used to validate its biofidelity.Using the validated model,the lower leg model is subjected to combined axial compression and bending loads to evaluate its injury criteria.Compared with a typical Euro-American human body mode,the Chinese lower leg presents reduced mechanical tolerance,and the revised tibia index may be an appropriate injury criteria for the Chinese lower leg.Additionally,the validated model reproduces the pedestrian lower leg fracture in a domestic accident.
基金l’UniversitéLaval for the financial support of his sabbatical year at Dipartimento di Bioscienze e Territorio,Universitàdegli Studi del Molise in Campobasso,Italy。
文摘This work presents a novel approach to the dynamic response analysis of a Euler-Bernoulli beam resting on a Winkler soil model and subjected to an impact loading.The approach considers that damping has much less importance in controlling the maximum response to impulsive loadings because the maximum response is reached in a very short time,before the damping forces can dissipate a significant portion of the energy input into the system.The development of two sine series solutions,relating to different types of impulsive loadings,one involving a single concentrated force and the other a distributed line load,are presented.This study revealed that when a simply supported Euler-Bernoulli beam,resting on a Winkler soil model,is subject to an impact load,the resulting vertical displacements,bending moments and shear forces produced along the span of the beam are considerably affected.In particular,the quantification of this effect is best observed,relative to the corresponding static solution,via an amplification factor.The computed impact amplification factors,for the sub-grade moduli used in this study,were in magnitude greater than 2,thus confirming the multiple-degree-of-freedom nature of the problem.
基金funded from the European Union's Horizon 2020 research and innovation programme in the project In2Track3 under grant agreement No.101012456.
文摘Dynamic wheel-rail contact forces induced by a severe form of wheel tread damage have been measured by a wheel impact load detector during full-scale field tests at different vehicle speeds.Based on laser scanning,the measured three-dimensional damage geometry is employed in simulations of dynamic vehicle-track interaction to calibrate and verify a simulation model.The relation between the magnitude of the impact load and various operational parameters,such as vehicle speed,lateral position of wheel-rail contact,track stiffness and position of impact within a sleeper bay,is investigated.The calibrated model is later employed in simulations featuring other forms of tread damage;their effects on impact load and subsequent fatigue impact on bearings,wheel webs and subsurface initiated rolling contact fatigue of the wheel tread are assessed.The results quantify the effects of wheel tread defects and are valuable in a shift towards condition-based maintenance of running gear,and for general assessment of the severity of different types of railway wheel tread damage.
文摘Objective： The biomechanical characters of the bone fracture of the man femoral hip joint under impact loads are explored. Methods ：A biosystem model of the man femoral hip joint by using the GE （ General Electric） lightspeed multi-lay spiral CT is conducted. A 3D finite element model is established by employing the finite element software ANSYS. The FE analysis mainly concentrates on the effects of the impact directions arising from intense movements and the parenchyma on the femoral hip joint on the stress distributions of the proximal femur. Results：The parenchyma on the hip joint has relatively large relaxation effect on the impact loads. Conclusion：Effects of the angle δ of the impact load to the anterior direction and the angle γ of the impact load to the femur shaft on the bone fracture are given;δ has larger effect on the stress and strain distributions than the angle γ,which mainly represents the fracture of the upper femur including the femoral neck fracture when the posterolateral femur is impacted, consistent with the clinical resuits.
文摘Objective： To investigate the stress distribution and fracture mechanism of proximal femur under impact loads. Methods ： The image data of one male＇ s femur were collected by the Lightspeed multi-lay spiral computed tomography. A 3D finite element model of the femur was established by employing the finite element software ANSYS, which mainly concentrated on the effects of the directions of the impact loads arising from intense movements and the parenchyma on the hip joint as well as those of the femur material properties on the distribution of the Mises equivalent stress in the femur after impact. Results： The numerical results about the effects of the angle δ of the impact loads to the anterior direction and the angle γ of the impact loads to the femur shaft on the bone fracture were given. The angle δ had larger effect on the stress distribution than the angle γ, which mainly represented the fracture of the upper femur including the femoral neck fracture when the posterolateral femur was impacted. This result was consistent with the clinical one. The parenchyma on the hip joint has relatively large relaxation effect on the impact loads. Conclusions ： A 3D finite element analysis model of the femoral hip joint under dynamic loads is successfully established by using the impact dynamic theory.
基金The authors gratefully acknowledge the financial support received from the China Postdoctoral Science Foundation(2018M630676)National Nature Science Foundation of China(Nos.51675521 and 51779224)+1 种基金Zhejiang Basic Public Welfare Research Program(No.LHZ19E090002)and Open Founda-tion of Shandong Province Key Laboratory of Mine Mechanical.Engineering(No.2019KLMM105).
文摘This paper proposes a numerical three-dimensional(3D)mesoscopic approach based on the discrete element method combined with X-ray computed tomography(XCT)images to characterize the dynamic impact behavior of heterogeneous coal-rock(HCR).The dynamic impact loading in three directions was modelled to investigate the effects of the 3D meso-structure on the failure patterns and fracture mechanism,with different impact velocities.The XCT image-based discrete element model of HCR was calibrated through appropriate standard uniaxial compression tests.Numerical simulations were carried out to investigate how the breakage behaviors are affected by different loading directions with different impact velocities.The loading direction,input energy,and spatial distribution of the mineral phase had a remarkable influence on the failure patterns and load-carrying capacities.The shape of the gangue phase and the approximate location of the gangue interfaces are key parameters to consider when investigating the failure patterns and fracture mechanism of heterogeneous rock materials.The damage and fracture tended to propagate from the surfaces to the HCR interior.The gangue phase area contacting the loading wall,growth direction of the strong gangue interfaces,and loading directions greatly influenced the failure patterns of the heterogeneous rock materials.
基金financial support from the Australian Research Council Laureate Fellowships FL180100196。
文摘This study investigated the performances of a new type of precast beam-column joint subjected to earthquake and impact loads.For sustainability and durability considerations,new materials such as corrosion-resistant fibre reinforced polymer(FRP)bolts and reinforcements,fibre reinforced concrete(FRC),and geopolymer concrete(GPC)were used to construct the joint.To examine the resilience,durability,sustainability,and multi-hazard resistance capacities,both cyclic and pendulum impact tests were carried out.The experimental results demonstrated that the proposed precast joints had the comparable or even better performances as compared with the traditional monolithic joints under cyclic and impact loads.Numerical simulations using ABAQUS were also adopted to determine the optimal values of the concrete-end-plate(CEP)thickness for the proposed dry joints and to further quantify other response parameters which could not be obtained during the test,e.g.,stress distribution,energy absorption,and stress contours.Discussion on the influences of various parameters on joint performances under different loading conditions was also presented in this study.
基金Fundamental Research Foundation for Universities of Heilongjiang Province under Grant No.2018-KYYWF-1651Natural Science Foundation of Heilongjiang Province under Grant Nos.ZD2019E009 and E2016045+1 种基金Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant Nos.2018D12 and 2019D16National Natural Science Foundation of China under Grant No.51378164。
文摘Vehicle load is among the main factors affecting the deformation of subgrade soil.In this research study,the concept of impact type traffic load is introduced to investigate the effects of vehicle load based on the dynamic stress and displacement time histories acquired from seasonal frozen subgrade soils.Using freezing-thawing and dynamic triaxial tests and considering the amplitude and loading sequence of impact type traffic load,the residual deformation characteristics of subgrade soil under impact type traffic loads and freezing-thawing cycles is studied.It was found that under impact type traffic load,the residual deformation of soils increased sharply as the amplitude of impact type traffic load increased.It was also found that the increase in the amplitude of impact type traffic load led to the increase of residual deformation in a scale of power and exponential function.The amplitudes of impact type traffic load affect the development stress-strain path of the residual strain.After the soil experienced the proper amount of pre-vibration of the light load,residual deformation decreased by 15%.After freezing-thawing,the residual strain of soil increased as the amplitude of the impact type traffic loads increased.Also,when the amplification effect of freezing-thawing on the residual strain was basically stable,the residual deformation increased by about 10%.The peak impact type traffic load had a large effect on soil deformation after the freezing-thawing process,leading to the observation that of the earlier the peaks,the stronger the effect of freezing-thawing.After the soil was subjected to preloading with a small load,the influence of the freezing-thawing cycles gradually stabilized.The results may be useful in preventing and controlling the risk of subgrade soil failure when construction takes place spring thaw periods.
基金supported by the Chongqing Youth Talent Support Program(Cstc2022ycjh-bgzxm0079)the Chinese National Natural Science Foundation(52379128,51979152)+2 种基金Science Fund for Distinguished Young Scholars of Hubei Proivnce(2023AFA048)Educational Commission of Hubei Province of China(T2020005)the Young Top-notch Talent Cultivation Program of Hubei Province.
文摘In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.
文摘Understanding the evolution mechanisms of water-exit cavities and flow fields evolve during highintensity interactions between vehicles and floating ice is critical for advancing the application of submarine-launched marine equipment in low-temperature ice-prone waters.A computational fluid dynamics-finite element method(CFD-FEM) coupled framework was established to simulate bidirectional fluid-structure interactions during the water-exit process of a ventilated vehicle impacting ice in brash environments.Distinct evolution characteristics were revealed by comparatively analyzing the cavity,flow fields,hydrodynamic loading,structural deformation,and trajectory stability across three scenarios:ice-free,single-ice,and multi-ice.Furthermore,the position-dependent impact effects were characterized.The findings reveal that the impact,friction,and compression effects of ice induce bending and wrinkling of the shoulder cavity,aggravating its collapse and increasing the wetting of the vehicle,resulting in a substantial expansion of the high-velocity and vortex-dominated regions within the flow field,accompanied by more obvious water splashes.The impact of ice notably increases the kinetic energy dissipation of the vehicle during the cross-water stage and diminishes its motion stability.In the center-symmetric layout,the vehicle collides with ice only once,with high stress confined to the head.Conversely,the radial-offset layout causes secondary or even multiple collisions,resulting in high-stress areas on the shoulder of the vehicle,making it deflect and ultimately causing the tail cavity to tilt and become destabilized.The design of new vehicles suitable for ice-prone environments should focus on enhancing the impact toughness of the head structure and optimizing the surface shape design to improve the adaptability to low-temperature complex environments.
基金supported by the Youth Fund of the CCTEG Coal Mining Research Institute(Grant No.KCYJY-2023-QN-01)the National Natural Science Foundation of China(Grant No.52174080)the Science Foundation of Tiandi Technology Co.,Ltd.(Grant No.2022-2-TD-ZD016).
文摘In this study,a coupled loading method combining three-dimensional static loading with graded cyclic impacts was developed to simulate the stress environment of the surrounding rock under impact ground pressure caused by cyclic disturbances.The mechanical behavior and energy dissipation of coal under this loading method were studied using a split Hopkinson pressure bar(SHPB).The results showed that the pre-applied cyclic low-pressure impacts deteriorated the coal sample's resistance to external loads.Under both cyclic low-pressure impacts and single high-pressure impacts,the dynamic peak stress and secant modulus decreased with increasing impact cycles,exhibiting dynamic fatigue characteristics.The dynamic secant modulus of the sample decreased by 4.14%-6.67%after each impact.The dissipated energy for coal fragmentation samples increased with the number of impacts,averaging 28%under cyclic low-pressure impacts and 29%under single high-pressure impacts.The efficiency of dissipated energy for coal fragmentation initially increased and then decreased as the wave impedance ratio between the coal sample and the bar increased,reaching a maximum of 43.3%when the ratio was 0.06.Based on the defined damage variable,the damage to coal samples from high-pressure impacts was found to be 12 times greater than that under low-pressure conditions.The degree of coal fragmentation was positively correlated with the maximum damage increment.With increasing maximum damage increment,the failure mode of the coal sample evolved from tensile failure to tensile-compressive-shear composite failure.
基金supported by the China Postdoctoral Science Foundation(2022M723687)the Doctoral Science and Technology Startup Foundation of Shandong University of Technology(420048)+3 种基金National College Student Innovation and Entrepreneurship Tainning Program(202410433053)National College Student Innovation and Entrepreneurship Tainning Program(202410433004)Provincial College Student Innovation and Entrepreneurship Tainning Program(S202410433084)the Natural Science Foundation of Shandong Province,China(ZR2025MS802)..
文摘Rock collapse is a significant geological disaster that poses a serious threat to life and property in mountainous regions worldwide. Investigating the response of protective structures to rockfall impacts can provide valuable references for the design and placement of such structures. In this study, RocPro3D and ABAQUS were employed to comprehensively analyze rockfall movement trajectories and the structural response upon impact. The results indicate that when the impact velocity of rockfall at the protective structure reaches 20–30 m/sec, the corresponding bounce height ranges from 5 to 8 m, and most rockfall accumulates at the slope toe. The interface form of the structure significantly influences various impact response indicators, including impact force, penetration depth, contact area, concrete strain, and displacement of the slab’s lower surface. Furthermore, slabs equipped with a buffer layer experience substantially less damage compared to those without one.
基金financially supported by the Aeronautical Science Foundation of China(Grant No.023M031077001)Shandong Provincial Natural Science Foundation(Grant No.ZR2022QE092)the Open Fund Project of Key Laboratory of Ocean Observation Technology,MNR(Grant No.2022klootA03)。
文摘Sea ice exhibits complex mechanical properties,and no unified constitutive model currently exists.This study establishes an elastoplastic sea ice constitutive model based on non-ordinary state-based Peridynamics(PD)and the TsaiWu yield criterion,applying force state calculations to sea ice collisions while mitigating zero energy modes.A Fortran program implements the elastic-plastic constitutive equation of PD to simulate spherical ice-steel plate collisions.The program's accuracy in simulating sea ice collisions is validated through comparison with finite element results.Using the established model,this study simulates collisions between vertical structures and layer ice,analyzing the effects of impact velocity,vertical structure size,and critical elongation on sea ice load.The findings demonstrate positive correlations between collision force and impact velocity,vertical structure size,and critical elongation.At high velocities,impact significantly affects collision force,primarily following a quadratic function,while vertical structure effects exhibit a linear relationship.
文摘In this paper,the isogeometric analysis(IGA)method is employed to analyze the oscillation characteristics of functionally graded triply periodic minimal surface(FG-TPMS)curved-doubly shells integrated with magneto-electric surface layers(referred to as"FG-TPMS-MEE curved-doubly shells")subjected to low-velocity impact loads.This study presents low-velocity impact load model based on a single springmass(S-M)approach.The FG-TPMS-MEE curved-doubly shells are covered with two magneto-electric surface layers,while the core layer consists of three types:I-graph and Wrapped Package-graph(IWP),Gyroid(G),and Primitive(P),with various graded functions.These types are notable for their exceptional stiffness-to-weight ratios,enabling a wide range of potential applications.The Maxwell equations and electromagnetic boundary conditions are applied to compute the change in electric potentials and magnetic potentials.The equilibrium equations of the shell are derived from a refined higher-order shear deformation theory(HSDT),and the transient responses of the FG-TPMS-MEE curveddoubly shells are subsequently determined using Newmark's direct integration method.These results have applications in structural vibration control and the analysis of structures subjected to impact or explosive loads.Furthermore,this study provides a theoretical prediction of the low-velocity impact load and magneto-electric-elastic effects on the free vibration and transient response of FG-TPMS-MEE curved-doubly shells.
