Refractory high entropy alloys(RHEAs)have drawn much attention for their potential applications in ad-vanced reactors.While improved irradiation resistance to void swelling and helium bubble formation has been frequen...Refractory high entropy alloys(RHEAs)have drawn much attention for their potential applications in ad-vanced reactors.While improved irradiation resistance to void swelling and helium bubble formation has been frequently reported,experimental investigation regarding their early-stage irradiation damage re-mains insufficient,which hinders the understanding of the behavior of point defects and small clusters.Here we select two typical RHEAs with desired mechanical properties,VTaTi and HfNbZrTi,as well as a conventional V-4Cr-4Ti alloy,and compare their irradiation-induced defect production and hardening under a low-dose irradiation to~0.1 dpa.Significant hardening is observed in V-4Cr-4Ti due to the pin-ning of deformation-induced dislocations by the high density of irradiation-induced loops.In contrast,the hardening in VTaTi is much weaker,corresponding well to the greatly reduced defect density.Strikingly,in HfNbZrTi,visible defect clusters are not observed with a Cs-corrected transmission electron microscope in the whole irradiation range,and no hardening effect is detected.Such strong suppression of irradia-tion damage is attributed to the large lattice distortion based on the ab initio calculations and the local chemical fluctuations based on the atomic-scale elemental mappings,which together hinder the mobility of interstitials.Furthermore,minor irradiation softening is evidenced by cross-sectional nanoindentation tests in HfNbZrTi,which is considered to be related to the evolution of short-range orders and interstitial impurities after irradiation.展开更多
High-entropy alloys(HEAs)exhibit the excellent elevated-temperature performance and irradiation resistance due to the important core effect of serious lattice distortion for impeding dislocation motion,as candidate ma...High-entropy alloys(HEAs)exhibit the excellent elevated-temperature performance and irradiation resistance due to the important core effect of serious lattice distortion for impeding dislocation motion,as candidate materials for nuclear applications.Despite the growth of the nuclear power sector,the effects of high-temperature and high-dose irradiation-induced voids on the mechanical properties of HEA in higher power nuclear reactors remain insufficiently researched,hindering its industrial application.In this study,we establish a consistent parameterization crystal plastic constitutive model for the hardening and creep behaviors of HEA,incorporating the spatial distribution of void size and shape effects,in contrast to traditional creep models that rely on temperature-related fitting parameters of the phenomenological power law equation.The model matches well with experimental data at different temperatures and irradiation doses,demonstrating its robustness.The effects of irradiation dose,temperature,and degree of lattice distortion on irradiation hardening and creep behavior of void-containing HEA are investigated.The results indicate that HEA with high lattice distortion exhibits better creep resistance under higher stress loads.The yield stress of irradiated HEA increases with increasing irradiation dose and temperature.The creep resistance increases with increasing irradiation dose and decreases with increasing irradiation temperature.The increase in irradiation dose causes a specific morphological transformation from spherical to cubic voids.The modeling and results could provide an effective theoretical way for tuning the yield strength and alloy design in advanced HEAs to meet irradiation properties.展开更多
The removal of ammonia nitrogen(NH_(4)^(+)-N)and bacteria from aquaculture wastewater holds paramount ecological and production significance.In this study,Pt/RuO_(2)/g-C_(3)N_(4)photocatalysts were prepared by deposit...The removal of ammonia nitrogen(NH_(4)^(+)-N)and bacteria from aquaculture wastewater holds paramount ecological and production significance.In this study,Pt/RuO_(2)/g-C_(3)N_(4)photocatalysts were prepared by depositing Pt and RuO_(2)particles onto g-C_(3)N_(4).The physicochemical properties of photocatalysts were explored by X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM),X-ray diffraction(XRD),and UV–vis diffuse reflectance spectrometer(UV–vis DRS).The photocatalysts were then applied to the removal of both NH_(4)^(+)-N and bacteria from simulated mariculture wastewater.The results clarified that the removals of both NH_(4)^(+)-N and bacteria were in the sequence of g-C_(3)N_(4)<RuO_(2)/g-C_(3)N_(4)<Pt/g-C_(3)N_(4)<Pt/RuO_(2)/g-C_(3)N_(4).This magnificent photocatalytic ability of Pt/RuO_(2)/g-C_(3)N_(4)can be interpreted by the transfer of holes from g-C_(3)N_(4)to RuO_(2)to facilitate the in situ generation of HClO from Cl^(−)in wastewater,while Pt extracts photogenerated electrons for H_(2)formation to enhance the reaction.The removal of NH_(4)^(+)-N and disinfection effect were more pronounced in simulated seawater than in purewater.The removal efficiency ofNH_(4)^(+)-N increases with an increase in pH of wastewater,while the bactericidal effect was more significant under a lower pH in a pH range of 6–9.In actual seawater aquaculture wastewater,Pt/RuO_(2)/g-C_(3)N_(4)still exhibits effective removal efficiency of NH_(4)^(+)-N and bactericidal performance under sunlight.This study provides an alternative avenue for removement of NH_(4)^(+)-N and bacteria from saline waters under sunlight.展开更多
On the surfaces of celestial bodies with no or thin atmospheres,such as the Moon and Mars,the solar wind irradiation process leads to the formation of hydrogen and helium enriched regions in the extraterrestrial soil ...On the surfaces of celestial bodies with no or thin atmospheres,such as the Moon and Mars,the solar wind irradiation process leads to the formation of hydrogen and helium enriched regions in the extraterrestrial soil particles.However,soil particles on the Earth with the similar composition lack such structures and properties.This discrepancy raises a key question whether there is a direct relationship between solar wind irradiation and the alterations in the structure and chemical performance of extraterrestrial materials.To address this question,this work investigates the effects of proton irradiation,simulating solar wind radiation,on the structure and photothermal catalytic properties of the classic catalyst In_(2)O_(3).It reveals that proton irradiation induces structural features in In_(2)O_(3) analogous to those characteristics of solar wind weathering observed in extraterrestrial materials.Furthermore,after proton beam irradiation with an energy of 30 keV and a dose of 3×10^(17) protons·cm^(-2),the methanol production yield of the In_(2)O_(3) catalyst increased to 2.6 times of its preirradiation level,and the methanol selectivity improved to 2.1 times of the original value.This work provides both theoretical and experimental support for the development of high-efficiency,radiation-resistant photothermal catalysts.展开更多
Controllable rock cracking technology is crucial for the exploration and exploitation of deep underground resources.Many existing studies have been dedicated to the laser-assisted rock-weakening technology.It has been...Controllable rock cracking technology is crucial for the exploration and exploitation of deep underground resources.Many existing studies have been dedicated to the laser-assisted rock-weakening technology.It has been proved that laser irradiation can improve drilling and blasting efficiency when combined with mechanical rock fracturing methods,which are irrelevant for borehole stabilization.To improve the latter,this study used laser ablation for borehole reinforcement.The high-power laser was applied to typical rock samples(sandstone,mudstone and coal)in both dry and saturated conditions.Multi-technique observations and measurements were used to fully understand the peculiar modifications of the specimens under laser treatment,i.e.mechanical loading,acoustic emission(AE)monitoring,digital image correlation(DIC)strain field evaluation,infrared thermography(IRT)monitoring and X-ray computed tomography(CT)scanning.The results showed that,in addition to the effects already demonstrated,laser irradiation can improve the strength of the soft rock,especially in the saturated state.The process involved a complicated phase change including melting and evaporation of the matrix under high-temperature and high-pressure to form a glassy high strength silicate material.This process is similar to the reaction between molten lava and water,or the impact of an asteroid on the earth.Inspired by the results,a conceptual path for a new borehole stabilization technology using laser ablation was outlined.展开更多
Evaluation of damage evolution effects in biodegradable pure Mg was carried out,using transmission electron microscope as surrogate irradiation for high-energy radionuclide β decay in Brachytherapy.Time-dependent qua...Evaluation of damage evolution effects in biodegradable pure Mg was carried out,using transmission electron microscope as surrogate irradiation for high-energy radionuclide β decay in Brachytherapy.Time-dependent quantitative defect production,evolution dynamics,and evolution statistics were revealed in-situ for two prism foils(z=[1.210],[10.10]),in as-received and heat-treated pure Mg,after 300 keV electron irradiation up to 0.468 dpa at R.T.Preferred nucleation of basal-plane interstitial-type 1/6<20.23>loops was confirmed,in addition to a small portion of prism-plane 1/3<11.20>loops.No cavities were found.A higher yield of point defect concentration and a more evident trend of defect coarsening were identified in[1.210]than in[10.10].Pre-existing dislocations(on the orders of 10^(13)−10^(14) m^(−2))in pure Mg resulted in a delay of the first occurrence of visible defects.Defect migration and elastic interactions governed the microstructural evolution of electron irradiation damage in pure Mg,giving rise to events of loop coalescence,growth,and sometimes rotation of habit plane.The influence of incident electron energy can be correlated to the rates of point defect production,and is quantifiable;however,interfered by defect cluster stability,defect mobility,and defect interactions.This forms an important theoretical basis for the application of Mg subjected to MeV-level β-decay radiation in Brachytherapy.The paper concludes with a brief comparison between Mg and conventional Ti casing,outlines the advantages and challenges,and provides reference points for the validation of Mg/Mg-alloys in Brachytherapy seed application.展开更多
[ Objective ]The aim of this study was to discuss the feasibility of breeding cabbage with high Vc by 532 nm laser.[ Method ] With the material of cabbage, the embryo of cabbage seeds was irradiated by frequency doubl...[ Objective ]The aim of this study was to discuss the feasibility of breeding cabbage with high Vc by 532 nm laser.[ Method ] With the material of cabbage, the embryo of cabbage seeds was irradiated by frequency doubled Nd ：YAG laser with different power densities and time, and the effects of laser mode on functional leaf area, chlorophyll and Vc contents in cabbage seedlings were also studied. [Result] The results showed that functional leaf area and chlorophyll content were related to laser power density and time when laser power density was 2 -20 mW/mm^2, while the optimal effect was observed at 14 mW/mm^2 for 1 min. The content of Vc in cabbage seedlings was related to dosage of laser irradiation when irradiating time ranged from 1 to 5 min, and the optimal effect was observed at 2.8 J （20 mW/mm^2, 3 min）. [Conclusion] Irradiating the embryo of cabbage seeds with proper irradiation dosage of 532 nm laser can increase its effect on the Vc content significantly.展开更多
This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-bas...This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-based elastomer(PBE)at concentrations ranging from 0 to 50 wt%,underwent a melt blending process and subsequent cobalt-60 gamma-ray irradiation with doses ranging from 0 to 250 kGy.Electrical conductivity,trap distribution,and alternating(AC)breakdown strength were chosen to assess the insulation performance.These results indicate that the addition of PBE significantly improves the electrical properties of PP under irradiation.For PP,the electrical conductivity increased with irradiation,whereas the trap depth and breakdown strength decreased sharply.Conversely,for the blend,these changes initially exhibit opposite trends.When the irradiation was increased to 250 kGy,the AC breakdown strength of the blend improved by more than 21%compared to that of PP.The physical and chemical structures of the samples were investigated to explore the improvement mechanisms.The results offer insights into the design of new cable-insulation materials suitable for NPPs.展开更多
Herein,a new method was developed for efficient and lasting fluorescent whitening cotton fabric by synthesizing and using a vinyl-containing fluorescent whitening agent to covalently grafting onto fiber surfaces with ...Herein,a new method was developed for efficient and lasting fluorescent whitening cotton fabric by synthesizing and using a vinyl-containing fluorescent whitening agent to covalently grafting onto fiber surfaces with the assistance of electron beam irradiation.The results from FT-IR spectroscopic,X-ray photoelectron spectroscopic,and energy dispersive spectrometric analyses showed that the fluorescent whitening agent was successfully anchored on cotton fiber via radiation-induced grafting copolymerization.The optimized whiteness value at 110.81(that of raw cotton fabric,74.50)was achieved using just 0.3 wt% fluorescent whitening agent.Notably,the whiteness value of the treated cotton fabric remained 110+even after 100 equivalent home-washing cycles,substantiating its excellent washing durability.Skin stimulation experiments on rabbits showed that the primary stimulation index of all experimental groups was 0 and no abnormal clinical symptoms were found in all tested rabbits,demonstrating the outstanding skin safety.Furthermore,energy generated by irradiation grafting technology was much lower than that of traditional processes and water consumption greatly reduced.Even the effluent from this process completely met the discharge standard of industrial wastewater without any treatment.This study explores a new method for textile finishing via electron beam irradiation,providing a green and sustainable perspective for the textile industry.展开更多
0 INTRODUCTION The lunar surface lacks an atmosphere and is continuously subjected to a combination of space weathering factors such as cosmic rays,solar wind,and micrometeorite impacts,forming a several-meter-thick l...0 INTRODUCTION The lunar surface lacks an atmosphere and is continuously subjected to a combination of space weathering factors such as cosmic rays,solar wind,and micrometeorite impacts,forming a several-meter-thick lunar regolith(Sorokin et al.,2020).展开更多
Negatively charged boron vacancy(V_(B)^(-))spin defects are stable in nanoscale hexagonal boron nitride(hBN)flakes,which can be easily integrated into two-dimensional materials and devices to serve as both sensors and...Negatively charged boron vacancy(V_(B)^(-))spin defects are stable in nanoscale hexagonal boron nitride(hBN)flakes,which can be easily integrated into two-dimensional materials and devices to serve as both sensors and protective materials.Ion irradiation is frequently employed to create V_(B)^(-)spin defects in hBN.However,the optimal ion irradiation parameters remain unclear,even though they play a crucial role in determining the depth and density of the defects,which in turn affect sensing sensitivity.In this work,we optimize the carbon ion irradiation parameters for creating V_(B)^(-)spin defects by varying the irradiation dose and the incident angle.For 30 keV carbon ion irradiation,the optimal irradiation dose to create a V_(B)^(-)ensemble is determined to be 4×10^(13)ions/cm^(2),and both continuous and pulsed optically detected magnetic resonance measurements are used to estimate the magnetic sensitivity and spin coherence properties.Moreover,the incident angle of energetic ions is found to influence both the depth and density distributions of the V_(B)^(-)ensemble,a factor that is often overlooked.These results pave the way for improving the performance of quantum sensors based on hBN spin defects by optimizing the irradiation parameters.展开更多
The stability of matrix graphite under neutron irradiation and in corrosive environments is crucial for the safe operation of molten salt reactors(MSRs).Raman spectroscopy and a slow positron beam were employed to inv...The stability of matrix graphite under neutron irradiation and in corrosive environments is crucial for the safe operation of molten salt reactors(MSRs).Raman spectroscopy and a slow positron beam were employed to investigate the effects of He ion irradiation fluences and subsequent annealing on the microstructure and defects of the matrix graphite.He ions with 500 keV energy and fluences ranging from 1.1×10^(15)ions∕cm^(2)to 3.5×10^(17)ions∕cm^(2)were used to simulate neutron irradiation at 300 K.The samples with an irradiation fluence of 3.5×10^(16)ions∕cm^(2)were subjected to isochronal annealing at different temperatures(573 K,873 K and 1173 K)for 3 h.The Raman results revealed that the D peak gradually increased,whereas the intrinsic G peak decreased with increasing irradiation fluence.At the same irradiation fluence,the D peak gradually decreased,whereas the intrinsic G peak increased with increasing annealing temperature.Slow positron beam analysis demonstrated that the density or size of irradiation defects(vacancy type)increased with higher irradiation fluence,but decreased rapidly with increasing annealing temperature.The Raman spectral analysis of sample cross sections subjected to high irradiation fluences revealed the emergence of amorphization precisely at the depth where ion damage was most pronounced,whereas the surface retained its crystalline structure.Raman and positron annihilation analyses indicated that the matrix graphite exhibited good irradiation resistance to He ions at 300 K.However,vacancy-type defects induced by He ion irradiation exhibit poor thermal stability and can be easily removed during annealing.展开更多
Correction:Nuclear Science and Techniques(2025)36:4 https://doi.org/10.1007/s41365-024-01548-5 In this article,the caption for Fig(s)1,3,and 4 was inadvert-ently truncated.The incorrect and the corrected captions are ...Correction:Nuclear Science and Techniques(2025)36:4 https://doi.org/10.1007/s41365-024-01548-5 In this article,the caption for Fig(s)1,3,and 4 was inadvert-ently truncated.The incorrect and the corrected captions are given below.展开更多
In this study,a novel microwave-water cooling-assisted mechanical rock breakage method was proposed to address the issues of severe tool wear at elevated temperatures,poor rock microwave absorption,and excessive micro...In this study,a novel microwave-water cooling-assisted mechanical rock breakage method was proposed to address the issues of severe tool wear at elevated temperatures,poor rock microwave absorption,and excessive microwave energy consumption.The investigation object was sandstone,which was irradiated at 4 kW microwave power for 60 s,180 s,300 s,and 420 s,followed by air and water cooling.Subsequently,uniaxial compression,Brazilian tension,and fracture tests were conducted.The evolution of damage in sandstone was measured using active and passive nondestructive acoustic detection methods.The roughness of the fracture surfaces of the specimens was quantified using the box-counting method.The damage mechanisms of microwave heating and water cooling on sandstone were discussed from both macroscopic and microscopic perspectives.The experimental results demonstrated that as the duration of the microwave irradiation increased,the P-wave velocity,uniaxial compressive strength(UCS),elastic modulus(E),tensile strength,and fracture toughness of sandstone exhibited various degrees of weakness and were further weakened by water cooling.Furthermore,an increase in the microwave irradiation duration enhanced the damaging effect of water cooling.The P-wave velocity of the sandstone was proportional to the mechanical parameters.Microwave heating and water cooling weakened the brittleness of the sandstone to a certain extent.The fractal dimension of the fracture surface was correlated with the duration of microwave heating,and the water-cooling treatment resulted in a rougher fracture surface.An analysis of the instantaneous cutting rate revealed that water cooling can substantially enhance the efficiency of microwave-assisted rock breakage.展开更多
Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating tempe...Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating temperature can accelerate hydrolytic kinetics and improve efficiency.In this work,magnetic sulfonated polypropylene resin(Fe_(3)O_(4)@PS-S)composites were reported for acidic-thermal hydrolysis of tylosin by employing the acidic feature of sulfonic group,the dielectric effect of resin,and the magnetic-loss effect of magnetite under microwave irradiation.As observed,a rapid and complete mitigation 100 mg/L of tylosin was achieved within 15 min by the catalysts.Acidic cleavage of tylosin was fulfilled by sulfonic groups in the composites,and microwave thermal accelerated the hydrolysis reactions due to the dielectric and magnetic-loss effects.Differentiating the dielectric and magnetic-loss effects through electromagnetic analyses indicated that the latter contributed more in converting microwave energy to heat.The interactions under multiple operational conditions were quantitatively fitted using the Behnajady model and visually demonstrated,which indicated that a synergic effect of microwave thermal-and acidichydrolyses contributed to the efficient mitigation of tylosin.The transformation products were identified and the pathways were supposed.Cleaving deoxyaminosugars groups and destructing lactone structures led to reduced antibacterial potential and toxicity reduction.The acute toxicity of tylosin and transformation products to fish,daphnia,and green algae were all classified as non-toxic.This work suggested that this synergistic acid-thermal hydrolytic method is attractive and promising in pretreating tylosin production wastewater in field.展开更多
The operational lifespan of nuclear graphite is significantly affected by irradiation creep,yet the microstructural mechanism underlying this creep phenomenon remains unclear.Some theories attempt to link microstructu...The operational lifespan of nuclear graphite is significantly affected by irradiation creep,yet the microstructural mechanism underlying this creep phenomenon remains unclear.Some theories attempt to link microstructural evolution with creep behavior,but the rapid migration rate of defects under irradiation and loading makes it difficult to capture the specific evolution process experimentally,resulting in a lack of direct structural evidence.Therefore,in this study,molecular dynamics simulations are employed to investigate the irradiation behavior and microstructural migration under external loading.The aim is to provide microstructural evidence for theories such as the dislocation pinning-unpinning and crystal yielding.The results demonstrate that high tensile loads can increase the potential energy and reduce threshold displacement energy of graphite crystals.Consequently,displacement damage probability and creep rate increase,which is not considered in previous theories.Meanwhile,different creep mechanisms are observed at different damage states and applied loads.In low-dose damage states dominated by interstitials and vacancies,the pinning-unpinning process at basal plane may be caused by a defect diffusion mode.Under high stress levels,direct breaking of pinning structures occurs,leading to rapid migration of basal planes,demonstrating the microstructural evolution process of irradiated crystal yielding and plastic flow.In high-dose damage states characterized significantly by amorphous components,short-range atomic diffusion can become the dominant creep mechanism,and diffusion along the c-axis of graphite crystals is no longer constrained.These findings provide a crucial reference for understanding the irradiation and creep behavior of nuclear graphite in reactors.展开更多
Volumetric additive manufacturing(VAM) transforms traditional 2D light pattern projection into spatial light field energy superposition,maximizing the utilization of radiated light and allowing for ultra-fast,support-...Volumetric additive manufacturing(VAM) transforms traditional 2D light pattern projection into spatial light field energy superposition,maximizing the utilization of radiated light and allowing for ultra-fast,support-free printing,which has specific applications in fields such as life sciences and optics.However,traditional VAM processes require numerous projections and extensive computational preparation,limiting practical applications due to low projection efficiency and prolonged calculation times.In this study,we developed sparse-view irradiation processing VAM(SVIP-VAM),employing an optimized odd-even(OE) irradiation strategy inspired by sparse-view computed tomography.Theoretically,we demonstrated structural contour reconstruction feasibility with as few as 8 projections.Using this sparse-view approach,we achieved high-quality fabrication with only 15 projections,enhancing each projection efficiency by over 60 times and reducing projection set computational time by nearly 10-fold.Ultimately,this efficient sparse-view method significantly expands VAM applications into fields requiring rapid manufacturing,such as tissue engineering,medical implants,and aerospace manufacturing.展开更多
The exceptional photoelectric performance and high compatibility of perovskite materials render perovskite solar cells highly promising for extensive development,thus garnering significant attention.In perovskite sola...The exceptional photoelectric performance and high compatibility of perovskite materials render perovskite solar cells highly promising for extensive development,thus garnering significant attention.In perovskite solar cells,the hole transport layer plays a crucial role.For the commonly employed organic small molecule hole transport material Spiro-OMeTAD,a certain period of oxidation treatment is required to achieve complete transport performance.However,this posttreatment oxidation processes typically rely on ambient oxidation,which poses challenges in terms of precise control and leads to degradation of the perovskite light absorption layer.This approach fails to meet the demands for high efficiency and stability in practical application.Herein,the mechanism of ultrafast laser on Spiro-OMeTAD and the reaction process for laser-induced oxidation of it are investigated.PbI_(2) at Perovskite/Spiro-OMeTAD interface breaks down to produce I_(2) upon ultrafast laser irradiation and I_(2) promote the oxidation process.Through the laser irradiation oxidation processing,a higher stability of perovskite solar cells is achieved.This work establishes a new approach toward oxidation treatment of Spiro-OMeTAD.展开更多
A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear acce...A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear accelerator.The main components include a thermionic DC electron gun,an RF linear accelerator,a beam diagnostic chamber,and a beam exit window for electron beam irradiation.Therefore,reengineering must be performed based on the characteristics of the electron beam and its dynamics throughout the system.In this study,the electron beam current density emitted from the cathode was calculated based on the thermionic emission theory,and the result was used to produce the electron beam distribution in the gun using CST Studio Suite^(■)software.The properties of the electron beam and its acceleration in the linear accelerator and downstream diagnostic section were studied using the ASTRA electron beam dynamics simulation code,with the aim of producing an electron beam with an average energy of 4 MeV at the linear accelerator exit.The transverse beam profile and electron deposition dose in the ambient environment were calculated using Geant4 Monte Carlo simulation software to estimate the beam performance for the irradiation experiments.The parameters studied can be used as guidelines for machine operation and future experimental plans.展开更多
Balancing the adsorption of OH⁻and 5-hydroxymethylfurfural(HMF)is crucial in optimizing the competing HMF oxidation reaction and oxygen evolution reaction,especially given the polymerization tendency of HMF in alkalin...Balancing the adsorption of OH⁻and 5-hydroxymethylfurfural(HMF)is crucial in optimizing the competing HMF oxidation reaction and oxygen evolution reaction,especially given the polymerization tendency of HMF in alkaline solutions.Herein,we present an innovative approach for rapidly synthesizing a NiFe bimetallic metalorganic framework(MOF)induced by electron-withdrawing carbon quantum dot(EW-CQD)via electron beam irradiation within 2 min.EW-CQD serve as structural regulators,expanding the NiFe-MOF interlayer spacing,increasing reactive site availability,and more effectively balancing the adsorption of OH6(-) and HMF,thereby significantly boosting the oxidation activity of HMF.The resulting EW-CQD-MOF exhibits a low potential of 1.36 V vs.RHE at 10 mA cm^(-2)and maintains excellent durability over 120 h.Comprehensive in situ characterization elucidates the HMF oxidation reaction pathway,showing high selectivity towards 2,5-furandicarboxylic acid(FDCA)under ambient conditions,with an impressive HMF conversion rate of 94%and FDCA selectivity of 96%within 6 h.These findings underscore the critical role of structural optimization and adsorption balance in catalytic performance enhancement and offer valuable insights for designing high-efficiency catalysts,advancing sustainable catalytic processes.展开更多
基金supported by the National MCF En-ergy R&D Program of China(No.2022YFE03120000)the Na-tional Natural Science Foundation of China(Nos.12375266 and 12435016).
文摘Refractory high entropy alloys(RHEAs)have drawn much attention for their potential applications in ad-vanced reactors.While improved irradiation resistance to void swelling and helium bubble formation has been frequently reported,experimental investigation regarding their early-stage irradiation damage re-mains insufficient,which hinders the understanding of the behavior of point defects and small clusters.Here we select two typical RHEAs with desired mechanical properties,VTaTi and HfNbZrTi,as well as a conventional V-4Cr-4Ti alloy,and compare their irradiation-induced defect production and hardening under a low-dose irradiation to~0.1 dpa.Significant hardening is observed in V-4Cr-4Ti due to the pin-ning of deformation-induced dislocations by the high density of irradiation-induced loops.In contrast,the hardening in VTaTi is much weaker,corresponding well to the greatly reduced defect density.Strikingly,in HfNbZrTi,visible defect clusters are not observed with a Cs-corrected transmission electron microscope in the whole irradiation range,and no hardening effect is detected.Such strong suppression of irradia-tion damage is attributed to the large lattice distortion based on the ab initio calculations and the local chemical fluctuations based on the atomic-scale elemental mappings,which together hinder the mobility of interstitials.Furthermore,minor irradiation softening is evidenced by cross-sectional nanoindentation tests in HfNbZrTi,which is considered to be related to the evolution of short-range orders and interstitial impurities after irradiation.
基金support from the National Natural Science Foundation of China(Nos.12302083,U2267252,12372069,and 12172123)the China Postdoctoral Science Foundation(Nos.2023M731061 and BX20230109)+1 种基金the Natural Science Foundation of Hunan Province(No.2022JJ20001)the Hunan Provincial Innovation Foundation for Postgraduate(No.CX20230420).
文摘High-entropy alloys(HEAs)exhibit the excellent elevated-temperature performance and irradiation resistance due to the important core effect of serious lattice distortion for impeding dislocation motion,as candidate materials for nuclear applications.Despite the growth of the nuclear power sector,the effects of high-temperature and high-dose irradiation-induced voids on the mechanical properties of HEA in higher power nuclear reactors remain insufficiently researched,hindering its industrial application.In this study,we establish a consistent parameterization crystal plastic constitutive model for the hardening and creep behaviors of HEA,incorporating the spatial distribution of void size and shape effects,in contrast to traditional creep models that rely on temperature-related fitting parameters of the phenomenological power law equation.The model matches well with experimental data at different temperatures and irradiation doses,demonstrating its robustness.The effects of irradiation dose,temperature,and degree of lattice distortion on irradiation hardening and creep behavior of void-containing HEA are investigated.The results indicate that HEA with high lattice distortion exhibits better creep resistance under higher stress loads.The yield stress of irradiated HEA increases with increasing irradiation dose and temperature.The creep resistance increases with increasing irradiation dose and decreases with increasing irradiation temperature.The increase in irradiation dose causes a specific morphological transformation from spherical to cubic voids.The modeling and results could provide an effective theoretical way for tuning the yield strength and alloy design in advanced HEAs to meet irradiation properties.
基金supported by the Science and Technology Planning Project of Fujian Province(No.2023Y4015)the Marine and Fishery Development Special Fund of Xiamen(No.23YYST064QCB36)the Natural Science Foundation of Fujian Province(No.2021J011210).
文摘The removal of ammonia nitrogen(NH_(4)^(+)-N)and bacteria from aquaculture wastewater holds paramount ecological and production significance.In this study,Pt/RuO_(2)/g-C_(3)N_(4)photocatalysts were prepared by depositing Pt and RuO_(2)particles onto g-C_(3)N_(4).The physicochemical properties of photocatalysts were explored by X-ray photoelectron spectroscopy(XPS),scanning electron microscopy(SEM),X-ray diffraction(XRD),and UV–vis diffuse reflectance spectrometer(UV–vis DRS).The photocatalysts were then applied to the removal of both NH_(4)^(+)-N and bacteria from simulated mariculture wastewater.The results clarified that the removals of both NH_(4)^(+)-N and bacteria were in the sequence of g-C_(3)N_(4)<RuO_(2)/g-C_(3)N_(4)<Pt/g-C_(3)N_(4)<Pt/RuO_(2)/g-C_(3)N_(4).This magnificent photocatalytic ability of Pt/RuO_(2)/g-C_(3)N_(4)can be interpreted by the transfer of holes from g-C_(3)N_(4)to RuO_(2)to facilitate the in situ generation of HClO from Cl^(−)in wastewater,while Pt extracts photogenerated electrons for H_(2)formation to enhance the reaction.The removal of NH_(4)^(+)-N and disinfection effect were more pronounced in simulated seawater than in purewater.The removal efficiency ofNH_(4)^(+)-N increases with an increase in pH of wastewater,while the bactericidal effect was more significant under a lower pH in a pH range of 6–9.In actual seawater aquaculture wastewater,Pt/RuO_(2)/g-C_(3)N_(4)still exhibits effective removal efficiency of NH_(4)^(+)-N and bactericidal performance under sunlight.This study provides an alternative avenue for removement of NH_(4)^(+)-N and bacteria from saline waters under sunlight.
基金National Key Research and Development Program of China(2020YFA0710302)The Major Research Plan of the National Natural Science Foundation of China(91963206)+2 种基金The National Natural Science Foundation of China(52072169,51972164,51972167,22279053)The Fundamental Research Funds for the Central Universities(14380193)The Program for Guangdong Introducing Innovative and Entrepreneurial Teams(2019ZT08L101).
文摘On the surfaces of celestial bodies with no or thin atmospheres,such as the Moon and Mars,the solar wind irradiation process leads to the formation of hydrogen and helium enriched regions in the extraterrestrial soil particles.However,soil particles on the Earth with the similar composition lack such structures and properties.This discrepancy raises a key question whether there is a direct relationship between solar wind irradiation and the alterations in the structure and chemical performance of extraterrestrial materials.To address this question,this work investigates the effects of proton irradiation,simulating solar wind radiation,on the structure and photothermal catalytic properties of the classic catalyst In_(2)O_(3).It reveals that proton irradiation induces structural features in In_(2)O_(3) analogous to those characteristics of solar wind weathering observed in extraterrestrial materials.Furthermore,after proton beam irradiation with an energy of 30 keV and a dose of 3×10^(17) protons·cm^(-2),the methanol production yield of the In_(2)O_(3) catalyst increased to 2.6 times of its preirradiation level,and the methanol selectivity improved to 2.1 times of the original value.This work provides both theoretical and experimental support for the development of high-efficiency,radiation-resistant photothermal catalysts.
基金supported by the National Natural Science Foundation of China(Grant No.51804296)China Scholarship Council Grant(Grant No.CSC#202006425019).
文摘Controllable rock cracking technology is crucial for the exploration and exploitation of deep underground resources.Many existing studies have been dedicated to the laser-assisted rock-weakening technology.It has been proved that laser irradiation can improve drilling and blasting efficiency when combined with mechanical rock fracturing methods,which are irrelevant for borehole stabilization.To improve the latter,this study used laser ablation for borehole reinforcement.The high-power laser was applied to typical rock samples(sandstone,mudstone and coal)in both dry and saturated conditions.Multi-technique observations and measurements were used to fully understand the peculiar modifications of the specimens under laser treatment,i.e.mechanical loading,acoustic emission(AE)monitoring,digital image correlation(DIC)strain field evaluation,infrared thermography(IRT)monitoring and X-ray computed tomography(CT)scanning.The results showed that,in addition to the effects already demonstrated,laser irradiation can improve the strength of the soft rock,especially in the saturated state.The process involved a complicated phase change including melting and evaporation of the matrix under high-temperature and high-pressure to form a glassy high strength silicate material.This process is similar to the reaction between molten lava and water,or the impact of an asteroid on the earth.Inspired by the results,a conceptual path for a new borehole stabilization technology using laser ablation was outlined.
基金National Natural Science Foundation of China for funding support via grant No 12175013the Interdisciplinary Research Project for Young Researchers of USTB and the Youth Teacher International Exchange&Growth Program of USTB(Fundamental Research Funds for the Central Universities,China)for funding support via grant No FRF-IDRY-21–018 and QNXM20250033,respectively.
文摘Evaluation of damage evolution effects in biodegradable pure Mg was carried out,using transmission electron microscope as surrogate irradiation for high-energy radionuclide β decay in Brachytherapy.Time-dependent quantitative defect production,evolution dynamics,and evolution statistics were revealed in-situ for two prism foils(z=[1.210],[10.10]),in as-received and heat-treated pure Mg,after 300 keV electron irradiation up to 0.468 dpa at R.T.Preferred nucleation of basal-plane interstitial-type 1/6<20.23>loops was confirmed,in addition to a small portion of prism-plane 1/3<11.20>loops.No cavities were found.A higher yield of point defect concentration and a more evident trend of defect coarsening were identified in[1.210]than in[10.10].Pre-existing dislocations(on the orders of 10^(13)−10^(14) m^(−2))in pure Mg resulted in a delay of the first occurrence of visible defects.Defect migration and elastic interactions governed the microstructural evolution of electron irradiation damage in pure Mg,giving rise to events of loop coalescence,growth,and sometimes rotation of habit plane.The influence of incident electron energy can be correlated to the rates of point defect production,and is quantifiable;however,interfered by defect cluster stability,defect mobility,and defect interactions.This forms an important theoretical basis for the application of Mg subjected to MeV-level β-decay radiation in Brachytherapy.The paper concludes with a brief comparison between Mg and conventional Ti casing,outlines the advantages and challenges,and provides reference points for the validation of Mg/Mg-alloys in Brachytherapy seed application.
基金Supported by Fund from Jilin Provincial Science & Technology Department(20090541)Project from Department of Education ofJilin Province(200828)~~
文摘[ Objective ]The aim of this study was to discuss the feasibility of breeding cabbage with high Vc by 532 nm laser.[ Method ] With the material of cabbage, the embryo of cabbage seeds was irradiated by frequency doubled Nd ：YAG laser with different power densities and time, and the effects of laser mode on functional leaf area, chlorophyll and Vc contents in cabbage seedlings were also studied. [Result] The results showed that functional leaf area and chlorophyll content were related to laser power density and time when laser power density was 2 -20 mW/mm^2, while the optimal effect was observed at 14 mW/mm^2 for 1 min. The content of Vc in cabbage seedlings was related to dosage of laser irradiation when irradiating time ranged from 1 to 5 min, and the optimal effect was observed at 2.8 J （20 mW/mm^2, 3 min）. [Conclusion] Irradiating the embryo of cabbage seeds with proper irradiation dosage of 532 nm laser can increase its effect on the Vc content significantly.
基金supported by the National Natural Science Foundation of China(No.52077151)the State Key Laboratory of Electrical Insulation and Power Equipment(No.EIPE23208)the Key Laboratory of Engineering Dielectrics and Its Application,Ministry of Education(No.KFM202203).
文摘This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-based elastomer(PBE)at concentrations ranging from 0 to 50 wt%,underwent a melt blending process and subsequent cobalt-60 gamma-ray irradiation with doses ranging from 0 to 250 kGy.Electrical conductivity,trap distribution,and alternating(AC)breakdown strength were chosen to assess the insulation performance.These results indicate that the addition of PBE significantly improves the electrical properties of PP under irradiation.For PP,the electrical conductivity increased with irradiation,whereas the trap depth and breakdown strength decreased sharply.Conversely,for the blend,these changes initially exhibit opposite trends.When the irradiation was increased to 250 kGy,the AC breakdown strength of the blend improved by more than 21%compared to that of PP.The physical and chemical structures of the samples were investigated to explore the improvement mechanisms.The results offer insights into the design of new cable-insulation materials suitable for NPPs.
基金supported by the National Natural Science Foundation of China(Nos.12075153 and 11875313)CNNC Key Laboratory on Uranium Extraction from Seawater(No.KLUES202205).
文摘Herein,a new method was developed for efficient and lasting fluorescent whitening cotton fabric by synthesizing and using a vinyl-containing fluorescent whitening agent to covalently grafting onto fiber surfaces with the assistance of electron beam irradiation.The results from FT-IR spectroscopic,X-ray photoelectron spectroscopic,and energy dispersive spectrometric analyses showed that the fluorescent whitening agent was successfully anchored on cotton fiber via radiation-induced grafting copolymerization.The optimized whiteness value at 110.81(that of raw cotton fabric,74.50)was achieved using just 0.3 wt% fluorescent whitening agent.Notably,the whiteness value of the treated cotton fabric remained 110+even after 100 equivalent home-washing cycles,substantiating its excellent washing durability.Skin stimulation experiments on rabbits showed that the primary stimulation index of all experimental groups was 0 and no abnormal clinical symptoms were found in all tested rabbits,demonstrating the outstanding skin safety.Furthermore,energy generated by irradiation grafting technology was much lower than that of traditional processes and water consumption greatly reduced.Even the effluent from this process completely met the discharge standard of industrial wastewater without any treatment.This study explores a new method for textile finishing via electron beam irradiation,providing a green and sustainable perspective for the textile industry.
基金supported by the National Major Scientific and Technological Infrastructure Project“Space Environment Simulation and Research Infrastructure”financially supported in part by the National Natural Science Foundation of China(No.52275241)the Fund for National Key Laboratory of Space Environment and Matter Behaviors(No.2023059)。
文摘0 INTRODUCTION The lunar surface lacks an atmosphere and is continuously subjected to a combination of space weathering factors such as cosmic rays,solar wind,and micrometeorite impacts,forming a several-meter-thick lunar regolith(Sorokin et al.,2020).
基金supported by the National Key Research and Development Program Project(2024YFF0726104)Key Laboratory of Modern Optical Technologies of the Education Ministry of China,Soochow University(Grant No.KJS2135)+1 种基金a China Postdoctoral Science Foundation Funded Project(Grant No.2024M751236)the Jiangxi Provincial Natural Science Foundation(Grant No.20232BAB211030).
文摘Negatively charged boron vacancy(V_(B)^(-))spin defects are stable in nanoscale hexagonal boron nitride(hBN)flakes,which can be easily integrated into two-dimensional materials and devices to serve as both sensors and protective materials.Ion irradiation is frequently employed to create V_(B)^(-)spin defects in hBN.However,the optimal ion irradiation parameters remain unclear,even though they play a crucial role in determining the depth and density of the defects,which in turn affect sensing sensitivity.In this work,we optimize the carbon ion irradiation parameters for creating V_(B)^(-)spin defects by varying the irradiation dose and the incident angle.For 30 keV carbon ion irradiation,the optimal irradiation dose to create a V_(B)^(-)ensemble is determined to be 4×10^(13)ions/cm^(2),and both continuous and pulsed optically detected magnetic resonance measurements are used to estimate the magnetic sensitivity and spin coherence properties.Moreover,the incident angle of energetic ions is found to influence both the depth and density distributions of the V_(B)^(-)ensemble,a factor that is often overlooked.These results pave the way for improving the performance of quantum sensors based on hBN spin defects by optimizing the irradiation parameters.
基金supported by the National Natural Science Foundation of China(Nos.12005289,52072397)State Key Laboratory of Nuclear Detection and Electronics,University of Science and Technology of China(SKLPDE-KF-202316).
文摘The stability of matrix graphite under neutron irradiation and in corrosive environments is crucial for the safe operation of molten salt reactors(MSRs).Raman spectroscopy and a slow positron beam were employed to investigate the effects of He ion irradiation fluences and subsequent annealing on the microstructure and defects of the matrix graphite.He ions with 500 keV energy and fluences ranging from 1.1×10^(15)ions∕cm^(2)to 3.5×10^(17)ions∕cm^(2)were used to simulate neutron irradiation at 300 K.The samples with an irradiation fluence of 3.5×10^(16)ions∕cm^(2)were subjected to isochronal annealing at different temperatures(573 K,873 K and 1173 K)for 3 h.The Raman results revealed that the D peak gradually increased,whereas the intrinsic G peak decreased with increasing irradiation fluence.At the same irradiation fluence,the D peak gradually decreased,whereas the intrinsic G peak increased with increasing annealing temperature.Slow positron beam analysis demonstrated that the density or size of irradiation defects(vacancy type)increased with higher irradiation fluence,but decreased rapidly with increasing annealing temperature.The Raman spectral analysis of sample cross sections subjected to high irradiation fluences revealed the emergence of amorphization precisely at the depth where ion damage was most pronounced,whereas the surface retained its crystalline structure.Raman and positron annihilation analyses indicated that the matrix graphite exhibited good irradiation resistance to He ions at 300 K.However,vacancy-type defects induced by He ion irradiation exhibit poor thermal stability and can be easily removed during annealing.
文摘Correction:Nuclear Science and Techniques(2025)36:4 https://doi.org/10.1007/s41365-024-01548-5 In this article,the caption for Fig(s)1,3,and 4 was inadvert-ently truncated.The incorrect and the corrected captions are given below.
基金the financial support provided by the National Natural Science Foundation of China(Grant No.52274105)the China Scholarship Council(Grant No.202306370184)。
文摘In this study,a novel microwave-water cooling-assisted mechanical rock breakage method was proposed to address the issues of severe tool wear at elevated temperatures,poor rock microwave absorption,and excessive microwave energy consumption.The investigation object was sandstone,which was irradiated at 4 kW microwave power for 60 s,180 s,300 s,and 420 s,followed by air and water cooling.Subsequently,uniaxial compression,Brazilian tension,and fracture tests were conducted.The evolution of damage in sandstone was measured using active and passive nondestructive acoustic detection methods.The roughness of the fracture surfaces of the specimens was quantified using the box-counting method.The damage mechanisms of microwave heating and water cooling on sandstone were discussed from both macroscopic and microscopic perspectives.The experimental results demonstrated that as the duration of the microwave irradiation increased,the P-wave velocity,uniaxial compressive strength(UCS),elastic modulus(E),tensile strength,and fracture toughness of sandstone exhibited various degrees of weakness and were further weakened by water cooling.Furthermore,an increase in the microwave irradiation duration enhanced the damaging effect of water cooling.The P-wave velocity of the sandstone was proportional to the mechanical parameters.Microwave heating and water cooling weakened the brittleness of the sandstone to a certain extent.The fractal dimension of the fracture surface was correlated with the duration of microwave heating,and the water-cooling treatment resulted in a rougher fracture surface.An analysis of the instantaneous cutting rate revealed that water cooling can substantially enhance the efficiency of microwave-assisted rock breakage.
基金supported by the National Natural Science Foundation of China(Nos.51978052 and 22306012)the National Key Research and Development Program of China(No.2023YFC3711300)the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110578).
文摘Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating temperature can accelerate hydrolytic kinetics and improve efficiency.In this work,magnetic sulfonated polypropylene resin(Fe_(3)O_(4)@PS-S)composites were reported for acidic-thermal hydrolysis of tylosin by employing the acidic feature of sulfonic group,the dielectric effect of resin,and the magnetic-loss effect of magnetite under microwave irradiation.As observed,a rapid and complete mitigation 100 mg/L of tylosin was achieved within 15 min by the catalysts.Acidic cleavage of tylosin was fulfilled by sulfonic groups in the composites,and microwave thermal accelerated the hydrolysis reactions due to the dielectric and magnetic-loss effects.Differentiating the dielectric and magnetic-loss effects through electromagnetic analyses indicated that the latter contributed more in converting microwave energy to heat.The interactions under multiple operational conditions were quantitatively fitted using the Behnajady model and visually demonstrated,which indicated that a synergic effect of microwave thermal-and acidichydrolyses contributed to the efficient mitigation of tylosin.The transformation products were identified and the pathways were supposed.Cleaving deoxyaminosugars groups and destructing lactone structures led to reduced antibacterial potential and toxicity reduction.The acute toxicity of tylosin and transformation products to fish,daphnia,and green algae were all classified as non-toxic.This work suggested that this synergistic acid-thermal hydrolytic method is attractive and promising in pretreating tylosin production wastewater in field.
基金supported the Science and Technology Commission of Shanghai Municipality(No.21DZ2206900)。
文摘The operational lifespan of nuclear graphite is significantly affected by irradiation creep,yet the microstructural mechanism underlying this creep phenomenon remains unclear.Some theories attempt to link microstructural evolution with creep behavior,but the rapid migration rate of defects under irradiation and loading makes it difficult to capture the specific evolution process experimentally,resulting in a lack of direct structural evidence.Therefore,in this study,molecular dynamics simulations are employed to investigate the irradiation behavior and microstructural migration under external loading.The aim is to provide microstructural evidence for theories such as the dislocation pinning-unpinning and crystal yielding.The results demonstrate that high tensile loads can increase the potential energy and reduce threshold displacement energy of graphite crystals.Consequently,displacement damage probability and creep rate increase,which is not considered in previous theories.Meanwhile,different creep mechanisms are observed at different damage states and applied loads.In low-dose damage states dominated by interstitials and vacancies,the pinning-unpinning process at basal plane may be caused by a defect diffusion mode.Under high stress levels,direct breaking of pinning structures occurs,leading to rapid migration of basal planes,demonstrating the microstructural evolution process of irradiated crystal yielding and plastic flow.In high-dose damage states characterized significantly by amorphous components,short-range atomic diffusion can become the dominant creep mechanism,and diffusion along the c-axis of graphite crystals is no longer constrained.These findings provide a crucial reference for understanding the irradiation and creep behavior of nuclear graphite in reactors.
基金supported financially by the Beijing Municipal Natural Science Foundation (L232109)National Natural Science Foundation of China (22073003)Fundamental Research Funds for the Central Universities (YWF-22-K-101)。
文摘Volumetric additive manufacturing(VAM) transforms traditional 2D light pattern projection into spatial light field energy superposition,maximizing the utilization of radiated light and allowing for ultra-fast,support-free printing,which has specific applications in fields such as life sciences and optics.However,traditional VAM processes require numerous projections and extensive computational preparation,limiting practical applications due to low projection efficiency and prolonged calculation times.In this study,we developed sparse-view irradiation processing VAM(SVIP-VAM),employing an optimized odd-even(OE) irradiation strategy inspired by sparse-view computed tomography.Theoretically,we demonstrated structural contour reconstruction feasibility with as few as 8 projections.Using this sparse-view approach,we achieved high-quality fabrication with only 15 projections,enhancing each projection efficiency by over 60 times and reducing projection set computational time by nearly 10-fold.Ultimately,this efficient sparse-view method significantly expands VAM applications into fields requiring rapid manufacturing,such as tissue engineering,medical implants,and aerospace manufacturing.
基金supported by the National Key Research and Development Program of China(2020YFA0715000)the Guangdong Basic and Applied Basic Research Foundation(2021B1515120041)the Hainan Provincial Joint Project of Sanya Yazhou Bay Science and Technology City(2021JJLH0058)。
文摘The exceptional photoelectric performance and high compatibility of perovskite materials render perovskite solar cells highly promising for extensive development,thus garnering significant attention.In perovskite solar cells,the hole transport layer plays a crucial role.For the commonly employed organic small molecule hole transport material Spiro-OMeTAD,a certain period of oxidation treatment is required to achieve complete transport performance.However,this posttreatment oxidation processes typically rely on ambient oxidation,which poses challenges in terms of precise control and leads to degradation of the perovskite light absorption layer.This approach fails to meet the demands for high efficiency and stability in practical application.Herein,the mechanism of ultrafast laser on Spiro-OMeTAD and the reaction process for laser-induced oxidation of it are investigated.PbI_(2) at Perovskite/Spiro-OMeTAD interface breaks down to produce I_(2) upon ultrafast laser irradiation and I_(2) promote the oxidation process.Through the laser irradiation oxidation processing,a higher stability of perovskite solar cells is achieved.This work establishes a new approach toward oxidation treatment of Spiro-OMeTAD.
基金supported by Chiang Mai University for providing infrastructure and the NSRF via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation[grant number B05F650022]for the software CST Studio Suite^(■)2023Financial support for the reengineering and commissioning of the accelerator system was provided by the Thailand Center of Excellence in Physics(ThEP Center),Science and Technology Park Chiang Mai University(CMU STeP)。
文摘A 4 MeV RF linear accelerator for electron beam irradiation applications has been developed at the PBP-CMU Electron Linac Laboratory,Thailand.The system has been reengineered using a decommissioned medical linear accelerator.The main components include a thermionic DC electron gun,an RF linear accelerator,a beam diagnostic chamber,and a beam exit window for electron beam irradiation.Therefore,reengineering must be performed based on the characteristics of the electron beam and its dynamics throughout the system.In this study,the electron beam current density emitted from the cathode was calculated based on the thermionic emission theory,and the result was used to produce the electron beam distribution in the gun using CST Studio Suite^(■)software.The properties of the electron beam and its acceleration in the linear accelerator and downstream diagnostic section were studied using the ASTRA electron beam dynamics simulation code,with the aim of producing an electron beam with an average energy of 4 MeV at the linear accelerator exit.The transverse beam profile and electron deposition dose in the ambient environment were calculated using Geant4 Monte Carlo simulation software to estimate the beam performance for the irradiation experiments.The parameters studied can be used as guidelines for machine operation and future experimental plans.
基金funded by Shanghai Pujiang Program(21PJD022)Hunan Provincial Natural Science Foundation(2023JJ60522).
文摘Balancing the adsorption of OH⁻and 5-hydroxymethylfurfural(HMF)is crucial in optimizing the competing HMF oxidation reaction and oxygen evolution reaction,especially given the polymerization tendency of HMF in alkaline solutions.Herein,we present an innovative approach for rapidly synthesizing a NiFe bimetallic metalorganic framework(MOF)induced by electron-withdrawing carbon quantum dot(EW-CQD)via electron beam irradiation within 2 min.EW-CQD serve as structural regulators,expanding the NiFe-MOF interlayer spacing,increasing reactive site availability,and more effectively balancing the adsorption of OH6(-) and HMF,thereby significantly boosting the oxidation activity of HMF.The resulting EW-CQD-MOF exhibits a low potential of 1.36 V vs.RHE at 10 mA cm^(-2)and maintains excellent durability over 120 h.Comprehensive in situ characterization elucidates the HMF oxidation reaction pathway,showing high selectivity towards 2,5-furandicarboxylic acid(FDCA)under ambient conditions,with an impressive HMF conversion rate of 94%and FDCA selectivity of 96%within 6 h.These findings underscore the critical role of structural optimization and adsorption balance in catalytic performance enhancement and offer valuable insights for designing high-efficiency catalysts,advancing sustainable catalytic processes.
