A design for a fisheye optical system is modified in order to enable IR vision in addition to the visible and UV lighting. The proposed modification goes to replace the optical material of the movable lens by another ...A design for a fisheye optical system is modified in order to enable IR vision in addition to the visible and UV lighting. The proposed modification goes to replace the optical material of the movable lens by another with less thermal dispersion. The choice of appropriate materials lead to a good focus appeared on the retina for a wide spectral range includes UV, visible, and near IR lighting. Then, the performance of the modified design is verified through some optical measures for imaging quality determinations. These optical measures are determined with the aid of Zemax software, which also used for testing performance of the modified fisheye optical system. The analysis mainly focuses on the energy distribution in the light spot on the focal surface. The results show that the modified design of the fisheye is acceptable.展开更多
In this paper,an innovative 3D motion parameters estimation method from stereo image sequences based on infrared(IR) reflective markers is presented.It was assumed that two high speed CCD cameras had been calibrated p...In this paper,an innovative 3D motion parameters estimation method from stereo image sequences based on infrared(IR) reflective markers is presented.It was assumed that two high speed CCD cameras had been calibrated previously.The method consists of the following steps:1) the coordinate of several markers and depth map for each stereo pair was determined from the sequences of stereo images by relations of markers' coordinate the correspondence between markers was established,2) the 3D motion parameters of the target was computed based upon the matched markers' coordinate,and 3) translated 3D motion parameters estimation into the problem of least square according to the movement model of the object to be measured.Without using line,curve or corner correspondence,this method can calculate the depth of these markers feature easily and quickly in contrast to traditional approaches.The two CCD cameras work on 200 f/s,and each processing cost time is about 3 ms.It was found that,by using several markers and a large number of stereo images,this method can improve the computational speed,robustness and numerical accuracy of the motion parameters in comparison with traditional methods.The virtual simulation experiment was conducted using synthesized stereo image sequences based on 6-DOF motion platform and the experimental results proved the validity of our approach and showed that the translation and rotation precision is up to 0.1 mm and 0.1°.展开更多
The determination of an accurate center of rotation of rocket motor nozzle or other object to be measured is of great interest across a wide range of applications,such as rocket,missile,robotics,industry,spaceflight,a...The determination of an accurate center of rotation of rocket motor nozzle or other object to be measured is of great interest across a wide range of applications,such as rocket,missile,robotics,industry,spaceflight,aviation and human motion analysis fields,particularly for clinical gait analysis.A new approach was proposed to estimate the moving objects' instantaneous center of rotation and other motion parameters.The new method assumes that the two segment of object to be measured are rigid body which rotates around a center of rotation between each other relatively.The center of rotation varies with time in the global coordinate system but is fixed in the local coordinate system attached to each segment.The models of rocket motor nozzle and its movement were established.The arbitrary moving object's corresponding to motion equations were deduced,and the least square closed-form solutions of the object's motion parameters were figured out.It is assumed that the two high speed CCD cameras mounted on the 750 nm infrared(IR) filter are synchronized and calibrated in advance.The virtual simulation experiment using 3D coordinates of markers was conducted by synchronized stereo image sequences based on 6-DOF motion platform and the experimental results prove the feasibility of our algorithm.The test results show that the precision of x,y,z component on center of rotation is up to 0.14 mm,0.13 mm,0.15 mm.展开更多
文摘A design for a fisheye optical system is modified in order to enable IR vision in addition to the visible and UV lighting. The proposed modification goes to replace the optical material of the movable lens by another with less thermal dispersion. The choice of appropriate materials lead to a good focus appeared on the retina for a wide spectral range includes UV, visible, and near IR lighting. Then, the performance of the modified design is verified through some optical measures for imaging quality determinations. These optical measures are determined with the aid of Zemax software, which also used for testing performance of the modified fisheye optical system. The analysis mainly focuses on the energy distribution in the light spot on the focal surface. The results show that the modified design of the fisheye is acceptable.
基金Sponsored by the National Natural Science Foundation of China(Grant No. 50275040)
文摘In this paper,an innovative 3D motion parameters estimation method from stereo image sequences based on infrared(IR) reflective markers is presented.It was assumed that two high speed CCD cameras had been calibrated previously.The method consists of the following steps:1) the coordinate of several markers and depth map for each stereo pair was determined from the sequences of stereo images by relations of markers' coordinate the correspondence between markers was established,2) the 3D motion parameters of the target was computed based upon the matched markers' coordinate,and 3) translated 3D motion parameters estimation into the problem of least square according to the movement model of the object to be measured.Without using line,curve or corner correspondence,this method can calculate the depth of these markers feature easily and quickly in contrast to traditional approaches.The two CCD cameras work on 200 f/s,and each processing cost time is about 3 ms.It was found that,by using several markers and a large number of stereo images,this method can improve the computational speed,robustness and numerical accuracy of the motion parameters in comparison with traditional methods.The virtual simulation experiment was conducted using synthesized stereo image sequences based on 6-DOF motion platform and the experimental results proved the validity of our approach and showed that the translation and rotation precision is up to 0.1 mm and 0.1°.
基金Sponsored by the National Natural Science Foundation of China(Grant No. 50275040)
文摘The determination of an accurate center of rotation of rocket motor nozzle or other object to be measured is of great interest across a wide range of applications,such as rocket,missile,robotics,industry,spaceflight,aviation and human motion analysis fields,particularly for clinical gait analysis.A new approach was proposed to estimate the moving objects' instantaneous center of rotation and other motion parameters.The new method assumes that the two segment of object to be measured are rigid body which rotates around a center of rotation between each other relatively.The center of rotation varies with time in the global coordinate system but is fixed in the local coordinate system attached to each segment.The models of rocket motor nozzle and its movement were established.The arbitrary moving object's corresponding to motion equations were deduced,and the least square closed-form solutions of the object's motion parameters were figured out.It is assumed that the two high speed CCD cameras mounted on the 750 nm infrared(IR) filter are synchronized and calibrated in advance.The virtual simulation experiment using 3D coordinates of markers was conducted by synchronized stereo image sequences based on 6-DOF motion platform and the experimental results prove the feasibility of our algorithm.The test results show that the precision of x,y,z component on center of rotation is up to 0.14 mm,0.13 mm,0.15 mm.
